id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
34030	Jones, Franklin Day	Turning and Boring A specialized treatise for machinists, students in the industrial and engineering schools, and apprentices, on turning and boring methods, including modern practice with engine lathes, turret lathes, vertical and horizontal boring machines			.txt	text/plain	87912	4925	77	Tool--Turning Work Cylindrical--Roughing and Finishing Facing End with Side-tool and Turning Work The turning tool is started at the right-hand end of the work and the entire length, and when the tool has arrived at say position _x_, Fig. 5, it is returned to the starting point and the work is reversed in the LATHE TURNING TOOLS AND CUTTING SPEEDS LATHE TURNING TOOLS AND CUTTING SPEEDS Set of Lathe Turning Tools for General Work] =The Position of Turning Tools.=--The production of accurate lathe work in Fig. 1, the work will then be turned tapering as the tool is turned to the required form with a special tool having a cutting edge When threads are cut in the lathe a tool _t_ is used (see Fig. 2), The outside of the wheel rim is next finish-turned with cutter _V_ (Fig. 5) held in an extension turret tool-holder the same as the roughing	./cache/34030.txt	./txt/34030.txt