mv: ‘./input-file.zip’ and ‘./input-file.zip’ are the same file Creating study carrel named classification-TJ-gutenberg Initializing database Unzipping Archive: input-file.zip creating: ./tmp/input/input-file/ inflating: ./tmp/input/input-file/19133.txt inflating: ./tmp/input/input-file/28166.txt inflating: ./tmp/input/input-file/17783.txt inflating: ./tmp/input/input-file/27286.txt inflating: ./tmp/input/input-file/27687.txt inflating: ./tmp/input/input-file/22657.txt inflating: ./tmp/input/input-file/24441.txt inflating: ./tmp/input/input-file/25454.txt inflating: ./tmp/input/input-file/4238.txt inflating: ./tmp/input/input-file/476.txt inflating: ./tmp/input/input-file/10998.txt inflating: ./tmp/input/input-file/11164.txt inflating: ./tmp/input/input-file/35916.txt inflating: ./tmp/input/input-file/34030.txt inflating: ./tmp/input/input-file/38415.txt inflating: ./tmp/input/input-file/39033.txt inflating: ./tmp/input/input-file/34701.txt inflating: ./tmp/input/input-file/39225.txt inflating: ./tmp/input/input-file/39329.txt inflating: ./tmp/input/input-file/32677.txt inflating: ./tmp/input/input-file/47762.txt inflating: ./tmp/input/input-file/44604.txt inflating: ./tmp/input/input-file/43375.txt inflating: ./tmp/input/input-file/47187.txt inflating: ./tmp/input/input-file/42369.txt inflating: ./tmp/input/input-file/45932.txt inflating: ./tmp/input/input-file/46634.txt inflating: ./tmp/input/input-file/56332.txt inflating: ./tmp/input/input-file/55428.txt inflating: ./tmp/input/input-file/60819.txt inflating: ./tmp/input/input-file/28160.txt inflating: ./tmp/input/input-file/22245.txt inflating: ./tmp/input/input-file/metadata.csv caution: excluded filename not matched: *MACOSX* === DIRECTORIES: ./tmp/input === DIRECTORY: ./tmp/input/input-file === metadata file: ./tmp/input/input-file/metadata.csv === found metadata file === updating bibliographic database Building study carrel named classification-TJ-gutenberg FILE: cache/27286.txt OUTPUT: txt/27286.txt FILE: cache/19133.txt OUTPUT: txt/19133.txt FILE: cache/27687.txt OUTPUT: txt/27687.txt FILE: cache/28166.txt OUTPUT: txt/28166.txt FILE: cache/11164.txt OUTPUT: txt/11164.txt FILE: cache/25454.txt OUTPUT: txt/25454.txt FILE: cache/22657.txt OUTPUT: txt/22657.txt FILE: cache/39033.txt OUTPUT: txt/39033.txt FILE: cache/44604.txt OUTPUT: txt/44604.txt FILE: cache/476.txt OUTPUT: txt/476.txt FILE: cache/24441.txt OUTPUT: txt/24441.txt FILE: cache/17783.txt OUTPUT: txt/17783.txt FILE: cache/47187.txt OUTPUT: txt/47187.txt FILE: cache/4238.txt OUTPUT: txt/4238.txt FILE: cache/39329.txt OUTPUT: txt/39329.txt FILE: cache/35916.txt OUTPUT: txt/35916.txt FILE: cache/10998.txt OUTPUT: txt/10998.txt FILE: cache/34030.txt OUTPUT: txt/34030.txt FILE: cache/43375.txt OUTPUT: txt/43375.txt FILE: cache/45932.txt OUTPUT: txt/45932.txt FILE: cache/34701.txt OUTPUT: txt/34701.txt FILE: cache/47762.txt OUTPUT: txt/47762.txt FILE: cache/55428.txt OUTPUT: txt/55428.txt FILE: cache/28160.txt OUTPUT: txt/28160.txt FILE: cache/42369.txt OUTPUT: txt/42369.txt FILE: cache/38415.txt OUTPUT: txt/38415.txt FILE: cache/32677.txt OUTPUT: txt/32677.txt FILE: cache/46634.txt OUTPUT: txt/46634.txt FILE: cache/60819.txt OUTPUT: txt/60819.txt FILE: cache/56332.txt OUTPUT: txt/56332.txt FILE: cache/22245.txt OUTPUT: txt/22245.txt FILE: cache/39225.txt OUTPUT: txt/39225.txt === file2bib.sh === id: 4238 author: Babbage, Charles title: On the Economy of Machinery and Manufactures date: pages: extension: .txt txt: ./txt/4238.txt cache: ./cache/4238.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 1 resourceName b'4238.txt' Traceback (most recent call last): File "/data-disk/reader-compute/reader-classic/bin/file2bib.py", line 107, in text = textacy.preprocessing.normalize.normalize_quotation_marks( text ) File "/data-disk/python/lib/python3.8/site-packages/textacy/preprocessing/normalize.py", line 32, in normalize_quotation_marks return text.translate(QUOTE_TRANSLATION_TABLE) AttributeError: 'NoneType' object has no attribute 'translate' 25454 txt/../ent/25454.ent 25454 txt/../pos/25454.pos === file2bib.sh === id: 476 author: Nasmyth, James title: James Nasmyth, Engineer: An Autobiography date: pages: extension: .txt txt: ./txt/476.txt cache: ./cache/476.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 1 resourceName b'476.txt' Traceback (most recent call last): File "/data-disk/reader-compute/reader-classic/bin/file2bib.py", line 107, in text = textacy.preprocessing.normalize.normalize_quotation_marks( text ) File "/data-disk/python/lib/python3.8/site-packages/textacy/preprocessing/normalize.py", line 32, in normalize_quotation_marks return text.translate(QUOTE_TRANSLATION_TABLE) AttributeError: 'NoneType' object has no attribute 'translate' 24441 txt/../ent/24441.ent === file2bib.sh === id: 24441 author: Connor, W. J. title: The Stoker's Catechism date: pages: extension: .txt txt: ./txt/24441.txt cache: ./cache/24441.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 1 resourceName b'24441.txt' Traceback (most recent call last): File "/data-disk/reader-compute/reader-classic/bin/file2bib.py", line 107, in text = textacy.preprocessing.normalize.normalize_quotation_marks( text ) File "/data-disk/python/lib/python3.8/site-packages/textacy/preprocessing/normalize.py", line 32, in normalize_quotation_marks return text.translate(QUOTE_TRANSLATION_TABLE) AttributeError: 'NoneType' object has no attribute 'translate' === file2bib.sh === id: 25454 author: White, John H. title: Introduction of the Locomotive Safety Truck Contributions from the Museum of History and Technology: Paper 24 date: pages: extension: .txt txt: ./txt/25454.txt cache: ./cache/25454.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 1 resourceName b'25454.txt' Traceback (most recent call last): File "/data-disk/reader-compute/reader-classic/bin/file2bib.py", line 107, in text = textacy.preprocessing.normalize.normalize_quotation_marks( text ) File "/data-disk/python/lib/python3.8/site-packages/textacy/preprocessing/normalize.py", line 32, in normalize_quotation_marks return text.translate(QUOTE_TRANSLATION_TABLE) AttributeError: 'NoneType' object has no attribute 'translate' 4238 txt/../ent/4238.ent 476 txt/../wrd/476.wrd Traceback (most recent call last): File "/data-disk/reader-compute/reader-classic/bin/txt2keywords.py", line 54, in for keyword, score in ( yake( doc, ngrams=NGRAMS, topn=TOPN ) ) : File "/data-disk/python/lib/python3.8/site-packages/textacy/ke/yake.py", line 96, in yake word_scores = _compute_word_scores(doc, word_occ_vals, word_freqs, stop_words) File "/data-disk/python/lib/python3.8/site-packages/textacy/ke/yake.py", line 205, in _compute_word_scores freq_baseline = statistics.mean(freqs_nsw) + statistics.stdev(freqs_nsw) File "/data-disk/python/lib/python3.8/statistics.py", line 315, in mean raise StatisticsError('mean requires at least one data point') statistics.StatisticsError: mean requires at least one data point 4238 txt/../wrd/4238.wrd Traceback (most recent call last): File "/data-disk/reader-compute/reader-classic/bin/txt2keywords.py", line 54, in for keyword, score in ( yake( doc, ngrams=NGRAMS, topn=TOPN ) ) : File "/data-disk/python/lib/python3.8/site-packages/textacy/ke/yake.py", line 96, in yake word_scores = _compute_word_scores(doc, word_occ_vals, word_freqs, stop_words) File "/data-disk/python/lib/python3.8/site-packages/textacy/ke/yake.py", line 205, in _compute_word_scores freq_baseline = statistics.mean(freqs_nsw) + statistics.stdev(freqs_nsw) File "/data-disk/python/lib/python3.8/statistics.py", line 315, in mean raise StatisticsError('mean requires at least one data point') statistics.StatisticsError: mean requires at least one data point 4238 txt/../pos/4238.pos 25454 txt/../wrd/25454.wrd Traceback (most recent call last): File "/data-disk/reader-compute/reader-classic/bin/txt2keywords.py", line 54, in for keyword, score in ( yake( doc, ngrams=NGRAMS, topn=TOPN ) ) : File "/data-disk/python/lib/python3.8/site-packages/textacy/ke/yake.py", line 96, in yake word_scores = _compute_word_scores(doc, word_occ_vals, word_freqs, stop_words) File "/data-disk/python/lib/python3.8/site-packages/textacy/ke/yake.py", line 205, in _compute_word_scores freq_baseline = statistics.mean(freqs_nsw) + statistics.stdev(freqs_nsw) File "/data-disk/python/lib/python3.8/statistics.py", line 315, in mean raise StatisticsError('mean requires at least one data point') statistics.StatisticsError: mean requires at least one data point 476 txt/../pos/476.pos 24441 txt/../wrd/24441.wrd Traceback (most recent call last): File "/data-disk/reader-compute/reader-classic/bin/txt2keywords.py", line 54, in for keyword, score in ( yake( doc, ngrams=NGRAMS, topn=TOPN ) ) : File "/data-disk/python/lib/python3.8/site-packages/textacy/ke/yake.py", line 96, in yake word_scores = _compute_word_scores(doc, word_occ_vals, word_freqs, stop_words) File "/data-disk/python/lib/python3.8/site-packages/textacy/ke/yake.py", line 205, in _compute_word_scores freq_baseline = statistics.mean(freqs_nsw) + statistics.stdev(freqs_nsw) File "/data-disk/python/lib/python3.8/statistics.py", line 315, in mean raise StatisticsError('mean requires at least one data point') statistics.StatisticsError: mean requires at least one data point 24441 txt/../pos/24441.pos 476 txt/../ent/476.ent 28166 txt/../pos/28166.pos 28166 txt/../wrd/28166.wrd 28166 txt/../ent/28166.ent === file2bib.sh === id: 28166 author: Anonymous title: Installation and Operation Instructions For Custom Mark III CP Series Oil Fired Unit date: pages: extension: .txt txt: ./txt/28166.txt cache: ./cache/28166.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 3 resourceName b'28166.txt' 19133 txt/../pos/19133.pos 19133 txt/../ent/19133.ent 19133 txt/../wrd/19133.wrd === file2bib.sh === id: 19133 author: Gregory, Charles Hutton title: Practical Rules for the Management of a Locomotive Engine in the Station, on the Road, and in cases of Accident date: pages: extension: .txt txt: ./txt/19133.txt cache: ./cache/19133.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 3 resourceName b'19133.txt' 27286 txt/../pos/27286.pos 27286 txt/../wrd/27286.wrd 27286 txt/../ent/27286.ent 34701 txt/../pos/34701.pos === file2bib.sh === id: 27286 author: Runciman, Walter C. title: Gas and Oil Engines, Simply Explained An Elementary Instruction Book for Amateurs and Engine Attendants date: pages: extension: .txt txt: ./txt/27286.txt cache: ./cache/27286.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 2 resourceName b'27286.txt' 34701 txt/../wrd/34701.wrd === file2bib.sh === id: 34701 author: Anonymous title: Steam Engines date: pages: extension: .txt txt: ./txt/34701.txt cache: ./cache/34701.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 4 resourceName b'34701.txt' 34701 txt/../ent/34701.ent 39033 txt/../pos/39033.pos 27687 txt/../pos/27687.pos 27687 txt/../wrd/27687.wrd 39033 txt/../wrd/39033.wrd 11164 txt/../wrd/11164.wrd 11164 txt/../pos/11164.pos 27687 txt/../ent/27687.ent 11164 txt/../ent/11164.ent 39033 txt/../ent/39033.ent 39329 txt/../pos/39329.pos 43375 txt/../pos/43375.pos 39329 txt/../wrd/39329.wrd === file2bib.sh === id: 39033 author: Low, David Allan title: An Introduction to Machine Drawing and Design date: pages: extension: .txt txt: ./txt/39033.txt cache: ./cache/39033.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 4 resourceName b'39033.txt' 17783 txt/../pos/17783.pos 17783 txt/../wrd/17783.wrd 43375 txt/../wrd/43375.wrd === file2bib.sh === id: 27687 author: Collins, Hubert E. (Hubert Edwin) title: Steam Turbines A Book of Instruction for the Adjustment and Operation of the Principal Types of this Class of Prime Movers date: pages: extension: .txt txt: ./txt/27687.txt cache: ./cache/27687.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 3 resourceName b'27687.txt' 47187 txt/../wrd/47187.wrd 47187 txt/../pos/47187.pos === file2bib.sh === id: 11164 author: Maggard, James H. title: Rough and Tumble Engineering date: pages: extension: .txt txt: ./txt/11164.txt cache: ./cache/11164.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 3 resourceName b'11164.txt' 43375 txt/../ent/43375.ent 38415 txt/../pos/38415.pos 39329 txt/../ent/39329.ent 44604 txt/../pos/44604.pos 34030 txt/../wrd/34030.wrd 47187 txt/../ent/47187.ent 44604 txt/../wrd/44604.wrd 38415 txt/../wrd/38415.wrd 34030 txt/../pos/34030.pos === file2bib.sh === id: 39329 author: Baldwin Locomotive Works title: Illustrated Catalogue of Locomotives; Baldwin Locomotive Works date: pages: extension: .txt txt: ./txt/39329.txt cache: ./cache/39329.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 4 resourceName b'39329.txt' 45932 txt/../pos/45932.pos 32677 txt/../pos/32677.pos 32677 txt/../wrd/32677.wrd 45932 txt/../wrd/45932.wrd 17783 txt/../ent/17783.ent 47762 txt/../wrd/47762.wrd 38415 txt/../ent/38415.ent === file2bib.sh === id: 43375 author: Unknown title: Measuring Tools date: pages: extension: .txt txt: ./txt/43375.txt cache: ./cache/43375.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 3 resourceName b'43375.txt' 47762 txt/../pos/47762.pos 44604 txt/../ent/44604.ent === file2bib.sh === id: 47187 author: Hermann, Edward Adolph title: Steam Shovels and Steam Shovel Work date: pages: extension: .txt txt: ./txt/47187.txt cache: ./cache/47187.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 3 resourceName b'47187.txt' 28160 txt/../pos/28160.pos 34030 txt/../ent/34030.ent 28160 txt/../wrd/28160.wrd 42369 txt/../wrd/42369.wrd 45932 txt/../ent/45932.ent 32677 txt/../ent/32677.ent 42369 txt/../pos/42369.pos === file2bib.sh === id: 44604 author: Doughty, Frank W. title: How to Become an Engineer date: pages: extension: .txt txt: ./txt/44604.txt cache: ./cache/44604.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 2 resourceName b'44604.txt' 22657 txt/../pos/22657.pos 28160 txt/../ent/28160.ent 10998 txt/../pos/10998.pos 10998 txt/../wrd/10998.wrd 22657 txt/../wrd/22657.wrd 47762 txt/../ent/47762.ent 22245 txt/../pos/22245.pos 35916 txt/../pos/35916.pos 22657 txt/../ent/22657.ent === file2bib.sh === id: 17783 author: Traveling Engineers' Association title: The Traveling Engineers' Association to Improve the Locomotive Engine Service of American Railroads Examination Questions and Answers for Firemen for Promotion and New Men for Employment date: pages: extension: .txt txt: ./txt/17783.txt cache: ./cache/17783.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 5 resourceName b'17783.txt' 22245 txt/../wrd/22245.wrd 42369 txt/../ent/42369.ent 10998 txt/../ent/10998.ent === file2bib.sh === id: 47762 author: Marten, Edward Bindon title: Records of Steam Boiler Explosions date: pages: extension: .txt txt: ./txt/47762.txt cache: ./cache/47762.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 4 resourceName b'47762.txt' 60819 txt/../pos/60819.pos 35916 txt/../wrd/35916.wrd === file2bib.sh === id: 45932 author: Slauson, Harold Whiting title: The Gasoline Motor date: pages: extension: .txt txt: ./txt/45932.txt cache: ./cache/45932.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 3 resourceName b'45932.txt' 35916 txt/../ent/35916.ent 55428 txt/../pos/55428.pos 46634 txt/../pos/46634.pos 46634 txt/../wrd/46634.wrd === file2bib.sh === id: 42369 author: Zerbe, James Slough title: Motors date: pages: extension: .txt txt: ./txt/42369.txt cache: ./cache/42369.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 5 resourceName b'42369.txt' 22245 txt/../ent/22245.ent 56332 txt/../pos/56332.pos 55428 txt/../wrd/55428.wrd 60819 txt/../wrd/60819.wrd === file2bib.sh === id: 32677 author: Cooper, Grace Rogers title: The Invention of the Sewing Machine date: pages: extension: .txt txt: ./txt/32677.txt cache: ./cache/32677.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 5 resourceName b'32677.txt' 56332 txt/../wrd/56332.wrd === file2bib.sh === id: 38415 author: Mathot, Rodolphe Edgard title: Gas-Engines and Producer-Gas Plants A Practice Treatise Setting Forth the Principles of Gas-Engines and Producer Design, the Selection and Installation of an Engine, Conditions of Perfect Operation, Producer-Gas Engines and Their Possibilities, the Care of Gas-Engines and Producer-Gas Plants, with a Chapter on Volatile Hydrocarbon and Oil Engines date: pages: extension: .txt txt: ./txt/38415.txt cache: ./cache/38415.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 6 resourceName b'38415.txt' === file2bib.sh === id: 28160 author: White, John H. title: The 'Pioneer': Light Passenger Locomotive of 1851 United States Bulletin 240, Contributions from the Museum of History and Technology, paper 42, 1964 date: pages: extension: .txt txt: ./txt/28160.txt cache: ./cache/28160.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 3 resourceName b'28160.txt' 60819 txt/../ent/60819.ent 46634 txt/../ent/46634.ent 55428 txt/../ent/55428.ent 56332 txt/../ent/56332.ent === file2bib.sh === id: 34030 author: Jones, Franklin Day title: Turning and Boring A specialized treatise for machinists, students in the industrial and engineering schools, and apprentices, on turning and boring methods, including modern practice with engine lathes, turret lathes, vertical and horizontal boring machines date: pages: extension: .txt txt: ./txt/34030.txt cache: ./cache/34030.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 5 resourceName b'34030.txt' === file2bib.sh === id: 22245 author: Bassett, Sara Ware title: Steve and the Steam Engine date: pages: extension: .txt txt: ./txt/22245.txt cache: ./cache/22245.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 4 resourceName b'22245.txt' === file2bib.sh === id: 55428 author: Lardner, Dionysius title: The Steam Engine Familiarly Explained and Illustrated With an historical sketch of its invention and progressive improvement; its applications to navigation and railways; with plain axioms for railway speculators date: pages: extension: .txt txt: ./txt/55428.txt cache: ./cache/55428.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 9 resourceName b'55428.txt' === file2bib.sh === id: 60819 author: Lukin, James title: The Lathe & Its Uses Or, Instruction in the Art of Turning Wood and Metal. Including a Description of the Most Modern Appliances for the Ornamentation of Plane and Curved Surfaces. With an Appendix, in Which is Described an Entirely Novel Form of Lathe for Eccentric and Rose Engine Turning; a Lathe and Planing Machine Combined; and Other Valuable Matter Relating to the Art. date: pages: extension: .txt txt: ./txt/60819.txt cache: ./cache/60819.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 7 resourceName b'60819.txt' === file2bib.sh === id: 22657 author: Babcock & Wilcox Company title: Steam, Its Generation and Use date: pages: extension: .txt txt: ./txt/22657.txt cache: ./cache/22657.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 10 resourceName b'22657.txt' === file2bib.sh === id: 10998 author: Bourne, John, C. E. title: A Catechism of the Steam Engine date: pages: extension: .txt txt: ./txt/10998.txt cache: ./cache/10998.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 8 resourceName b'10998.txt' === file2bib.sh === id: 35916 author: Thurston, Robert Henry title: A History of the Growth of the Steam-Engine date: pages: extension: .txt txt: ./txt/35916.txt cache: ./cache/35916.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 10 resourceName b'35916.txt' 39225 txt/../pos/39225.pos === file2bib.sh === id: 46634 author: Trevithick, Francis title: Life of Richard Trevithick, with an Account of His Inventions. Volume 2 (of 2) date: pages: extension: .txt txt: ./txt/46634.txt cache: ./cache/46634.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 10 resourceName b'46634.txt' 39225 txt/../wrd/39225.wrd === file2bib.sh === id: 56332 author: Moore, Bloomfield H., Mrs. title: Keely and His Discoveries: Aerial Navigation date: pages: extension: .txt txt: ./txt/56332.txt cache: ./cache/56332.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 8 resourceName b'56332.txt' 39225 txt/../ent/39225.ent === file2bib.sh === id: 39225 author: Rose, Joshua title: Modern Machine-Shop Practice, Volumes I and II date: pages: extension: .txt txt: ./txt/39225.txt cache: ./cache/39225.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 X-Parsed-By ['org.apache.tika.parser.DefaultParser', 'org.apache.tika.parser.csv.TextAndCSVParser'] X-TIKA:content_handler ToTextContentHandler X-TIKA:embedded_depth 0 X-TIKA:parse_time_millis 83 resourceName b'39225.txt' Done mapping. Reducing classification-TJ-gutenberg === reduce.pl bib === id = 19133 author = Gregory, Charles Hutton title = Practical Rules for the Management of a Locomotive Engine in the Station, on the Road, and in cases of Accident date = pages = extension = .txt mime = text/plain words = 6464 sentences = 210 flesch = 62 summary = the stuffing-boxes of the piston-rod and slide-valve spindle, or of water Engine-man were required to deliver to the Superintendent of the Station Water is supplied by opening the cocks in the feed-pipes, which allow the Engine-man has the power of regulating the height of the water in the The water is higher when the Engine is running than when stopping: a good working height for it in most Engines is when _water_ blows off from the middle cock while running, and _water and steam_ when stopping: an Engine-man is sometimes obliged to run the water rather lower, if he has Coke is put on the fire by the Stoker, at the order of the Engine-man, turn off the feed-pumps, the steam slightly blowing off, and the Engine The Engine-man should frequently look to the working gear, to see that it In a six-wheeled Engine it requires the stoppage of the train until cache = ./cache/19133.txt txt = ./txt/19133.txt === reduce.pl bib === id = 28166 author = Anonymous title = Installation and Operation Instructions For Custom Mark III CP Series Oil Fired Unit date = pages = extension = .txt mime = text/plain words = 2390 sentences = 302 flesch = 81 summary = The Custom Mark III CP Series Oil Fired Unit is a high quality heating If external damage is noted, open the carton and _BEFORE REMOVING SHIPPING CARTON, LOCATE UNIT IN ITS FINAL POSITION_ burner end of the unit which is also the end where the return and flue locate unit as near chimney flue as possible in order to avoid use of a DO NOT PUSH AGAINST ANY PART OF JACKET OR OIL BURNER WHEN MOVING UNIT. TO MOVE UNIT, PUSH AGAINST _SKIDS, FLUE BOX OR SMOKE BOX_. Once the unit is in its proper location with the packing carton, skids While the unit is equipped with an induced draft fan, proper size vent _just below the flue pipe opening_, if the unit is attached to an 190 degrees then turn the limit control setting until the burner stops. The proper tension on the fuel unit belt drive is set at the factory. cache = ./cache/28166.txt txt = ./txt/28166.txt === reduce.pl bib === id = 17783 author = Traveling Engineers' Association title = The Traveling Engineers' Association to Improve the Locomotive Engine Service of American Railroads Examination Questions and Answers for Firemen for Promotion and New Men for Employment date = pages = extension = .txt mime = text/plain words = 58318 sentences = 5329 flesch = 84 summary = A. Close the main steam valve at the boiler, that will stop the leak if A. The brake pipe pressure begins at the feed valve and ends at the the brake pipe, air from the main reservoir flows to the triple valves of the cylinder, the steam valve opens communication to the exhaust port use live steam in low-pressure cylinder only, for the broken piston. A. Remove the broken piston valve, reduce boiler pressure to 100 pounds piston rod in the air end, or the main valve stuck in its position at Q. What defect in the feed valve will cause the brake pipe pressure valves to release position, thus allowing the brake cylinder air to pressure on the brake pipe side of the triple valve piston 4 above that A. In release position of the brake valve, air from the main reservoir A. In release position of the brake valve, air from the main reservoir cache = ./cache/17783.txt txt = ./txt/17783.txt === reduce.pl bib === id = 27286 author = Runciman, Walter C. title = Gas and Oil Engines, Simply Explained An Elementary Instruction Book for Amateurs and Engine Attendants date = pages = extension = .txt mime = text/plain words = 14875 sentences = 755 flesch = 73 summary = form the now well-known cycle upon which most gas engines work at the two main castings--the bed and cylinder--a small engine, generally causing them to open and close at the proper time, are shown in fig. both air _and_ gas valve are opened on the charging stroke; that depends The gas and air valve are shown as both being operated by the same In this case the governor lever only operates the gas valve; the air valve being opened on every charging or suction stroke, whether gas is operate both air and gas valves, and so one cam only is necessary; but With the gas, as with any other kind of engine, the valve settings are when the gas, air, and exhaust valves open and close respectively, under governor is fitted to the air valve lever, as in fig. with small high-speed engines fitted with suction air valve, the vacuum cache = ./cache/27286.txt txt = ./txt/27286.txt === reduce.pl bib === id = 22657 author = Babcock & Wilcox Company title = Steam, Its Generation and Use date = pages = extension = .txt mime = text/plain words = 154503 sentences = 12717 flesch = 79 summary = The water at the temperature of steam at 100 pounds pressure durable and efficient steam generator, many types of water-tube boilers combustion space possible in practically any water-tube boiler. In a properly designed water-tube boiler steam may be raised from a cold Where the water throughout the boiler is at the temperature of the steam That the steam and water space of the Babcock & Wilcox boiler are the of the heat in the steam used is returned to the boiler with the water. The conditions of feed temperature and steam pressure in boiler tests, Let H = total heat of one pound of steam at boiler pressure, will contain 6 per cent more heat units above the fuel water temperature of fuel, the weight of flue gas per pound of coal, the heat lost in the amount of boiler-heating surface to generate steam. cache = ./cache/22657.txt txt = ./txt/22657.txt === reduce.pl bib === id = 27687 author = Collins, Hubert E. (Hubert Edwin) title = Steam Turbines A Book of Instruction for the Adjustment and Operation of the Principal Types of this Class of Prime Movers date = pages = extension = .txt mime = text/plain words = 34273 sentences = 1634 flesch = 67 summary = closing of the admission valves under the control of a governor (Fig. 19), of the spring-weighted type attached directly to the top end of the steam-pipe at C and passes through the main throttle or regulating valve up by the rotary oil pump on the turbine; turning the water on to the the turbine has stopped, shutting down the auxiliary oil pump, turning In any case a small amount of the steaming water will pass by the gland so desired, the oil-cooling water may come from the circulating pumps of In the operation of the turbine and the conditions of the steam, both V. PROPER METHOD OF TESTING A STEAM TURBINE[3] V. PROPER METHOD OF TESTING A STEAM TURBINE[3] Although steam leakage through the valves of a turbine may not necessary to run the turbine up to speed, turn on the oil, and then, high-pressure steam pipe, nor any of the turbine valves. cache = ./cache/27687.txt txt = ./txt/27687.txt === reduce.pl bib === === reduce.pl bib === === reduce.pl bib === === reduce.pl bib === === reduce.pl bib === id = 10998 author = Bourne, John, C. E. title = A Catechism of the Steam Engine date = pages = extension = .txt mime = text/plain words = 147256 sentences = 7014 flesch = 72 summary = _A._--In a high pressure engine the steam, after having pushed the piston issue of steam to the engine is diminished; and the pressure in the boiler of a steam vessel, and increase the power of your engine by placing a boiler are two horizontal cylinders fitted with pistons, valves, connecting _Q._--Then in a steam vessel the valve of one engine may be worked engines: multiply the square of the diameter of the cylinder in inches by case of a 45 horse power boiler the total heating surface is 438 square steam through the safety valve in low pressure engines? cold water pump in cubic inches when the engine is double acting, and the valve placed on the feed pipe between the engine and the boilers, which horse power engine, with cylinder 6 inches diameter, pressure of steam 45 condensing engine with cylinder 56 inches diameter, 10 feet stroke, and cache = ./cache/10998.txt txt = ./txt/10998.txt === reduce.pl bib === id = 11164 author = Maggard, James H. title = Rough and Tumble Engineering date = pages = extension = .txt mime = text/plain words = 38347 sentences = 2073 flesch = 84 summary = engineer would not have made a good water boy, for the reason that he might have to learn too fast, in order to get the engine running in good know but that a boy without a head is about as good as an engineer with oiled and in a day or two ten pounds will start the empty engine in good is a good engineer, he does not know whether the pump is throwing more allow water to pass through it one way only, if it is in good working If your engine is fitted with both cross head pump and injector, you use the injector for pumping water when the engine is not running. engineers, when they want a little extra power, give the safety valve a running an engine with a safety plug seldom stops for a load of water A. If the pressure on boiler is 60 pounds, and the engine is cache = ./cache/11164.txt txt = ./txt/11164.txt === reduce.pl bib === id = 35916 author = Thurston, Robert Henry title = A History of the Growth of the Steam-Engine date = pages = extension = .txt mime = text/plain words = 144715 sentences = 6969 flesch = 67 summary = The engine was worked as follows: Steam is raised in the boiler, _B_, as the steam-engine in its new form was pushed into use by his energy whole time that the engine is at work, be kept as hot as the steam steam-engine a success until this time, when mechanics were just working steam, and their earlier Soho engines were, as Watt said, made connected with the steam-cylinder of the engine by a small pipe Steam-Engineer's Guide," and a work which remained standard many years This engine had a steam-cylinder 28 inches in diameter, and 6 feet that the power of the Steam-Engine may be applied to work the wheels." form of steam-engine, and made a successful working-model, was various forms of steam-engine, some working direct, and some geared to The form of steam-engine in most general use at this time, on pumping-engine; it was, at once, boiler, steam-cylinder, and cache = ./cache/35916.txt txt = ./txt/35916.txt === reduce.pl bib === id = 34030 author = Jones, Franklin Day title = Turning and Boring A specialized treatise for machinists, students in the industrial and engineering schools, and apprentices, on turning and boring methods, including modern practice with engine lathes, turret lathes, vertical and horizontal boring machines date = pages = extension = .txt mime = text/plain words = 87912 sentences = 4925 flesch = 77 summary = Tool--Turning Work Cylindrical--Roughing and Finishing Facing End with Side-tool and Turning Work The turning tool is started at the right-hand end of the work and the entire length, and when the tool has arrived at say position _x_, Fig. 5, it is returned to the starting point and the work is reversed in the LATHE TURNING TOOLS AND CUTTING SPEEDS LATHE TURNING TOOLS AND CUTTING SPEEDS Set of Lathe Turning Tools for General Work] =The Position of Turning Tools.=--The production of accurate lathe work in Fig. 1, the work will then be turned tapering as the tool is turned to the required form with a special tool having a cutting edge When threads are cut in the lathe a tool _t_ is used (see Fig. 2), The outside of the wheel rim is next finish-turned with cutter _V_ (Fig. 5) held in an extension turret tool-holder the same as the roughing cache = ./cache/34030.txt txt = ./txt/34030.txt === reduce.pl bib === id = 39033 author = Low, David Allan title = An Introduction to Machine Drawing and Design date = pages = extension = .txt mime = text/plain words = 27226 sentences = 2731 flesch = 88 summary = views of the _double riveted lap joint_ shown in fig. times full size the sections of screw threads as shown in fig. EXERCISE 12.--Draw, full size, the views shown in fig. square nut and bolt with countersunk head shown in fig. bolt for a marine shaft coupling shown in fig. The cast-iron flange coupling is shown in fig. EXERCISE 24: _Cast-iron Flange Coupling._--Draw the views shown in 24 of a cast-iron flange coupling, for a shaft 4-1/2 inches in EXERCISE 26: _Pillow Block for a Four-inch Shaft._--Draw the views EXERCISE 29: _Shaft Hanger._--Draw the two elevations shown in is secured as shown by an iron pin 5/16 inch diameter. EXERCISE 43: _Marine Connecting Rod._--Draw all the views shown in EXERCISE 44: _Coupling Rod End._--Draw first the side elevation and An example of a steam-engine cross-head is shown in fig. sectional elevation of the piston, &c., shown in fig. cache = ./cache/39033.txt txt = ./txt/39033.txt === reduce.pl bib === id = 34701 author = Anonymous title = Steam Engines date = pages = extension = .txt mime = text/plain words = 15882 sentences = 1039 flesch = 76 summary = as shown by the lowered pressure and temperature of the steam, and work action of the steam in an engine cylinder, if no heat were lost by piston is moved forward by the expansion of the steam, the pressure method of obtaining steam engine indicator diagrams and measuring the The Ideal Work Diagram of a Steam Engine] exhaust valve opens and relieves the pressure acting on the piston. stroke of an engine the exhaust valve in front of the piston remains Constructing a Steam Engine Work Diagram] PRESSURE, CLEARANCE, CUT-OFF AND PISTON SPEED OF STEAM the work diagram of an engine is shown in Fig. 38. In the case of vertical engines, the low-pressure cylinder is sometimes Fig. 44 illustrates a moderate-speed engine of the four-valve type. graphically the work done in a steam engine cylinder during one stroke A common form of steam engine indicator is shown in Fig. 49. cache = ./cache/34701.txt txt = ./txt/34701.txt === reduce.pl bib === id = 39225 author = Rose, Joshua title = Modern Machine-Shop Practice, Volumes I and II date = pages = extension = .txt mime = text/plain words = 854595 sentences = 49441 flesch = 82 summary = the step within the work holds the tooth to its cut, as shown in Fig. 330, in which N represents a nut and T the tap, both in section. diameter of work conical or taper instead of parallel is shown in Fig. 498: P and P' are square-headed screws threaded into the walls of A and each tool shall carry its cut along the work, is shown in Fig. 711. In roughing out coarse threads, a single-pointed tool, formed as in Fig. 998, and set considerably above the centre as shown, may be used to or table whereon to rest the work and hold it fair is shown in Fig. 1067, the taper shank fitting in the dead centre hole and the tailstock Under ordinary conditions that in the form of tool shown in Fig. 1113[15] is best for brass work, the face A being horizontal or slightly cache = ./cache/39225.txt txt = ./txt/39225.txt === reduce.pl bib === id = 38415 author = Mathot, Rodolphe Edgard title = Gas-Engines and Producer-Gas Plants A Practice Treatise Setting Forth the Principles of Gas-Engines and Producer Design, the Selection and Installation of an Engine, Conditions of Perfect Operation, Producer-Gas Engines and Their Possibilities, the Care of Gas-Engines and Producer-Gas Plants, with a Chapter on Volatile Hydrocarbon and Oil Engines date = pages = extension = .txt mime = text/plain words = 61829 sentences = 3655 flesch = 65 summary = OF PERFECT OPERATION, PRODUCER-GAS ENGINES AND THEIR POSSIBILITIES, THE oil engines, gas producers and gas plants generally for many years past. Gas-Producer.--Starting the Engine.--Care of the Generator 60 revolutions per minute, with a 50 horse-power producer-gas engine, of the gas-engine the cost of the producer, foundation, and the like, it to the wide introduction of producer gas engines even for small power. Electric ignition is effected in gas-engines by means of a battery and For engines driven by producer-gas magneto-igniters are cylinder a mixture of air and gas, ignited at the proper time by strokes of the engine, consists in providing the gas-supply pipe with in producer-gas engines is an excess of cylinder-lubricant likely to producer-gas engines, pressures of 114 to 170 pounds per square inch and operation of producer-gas engines. Pressure in producer-gas engines, 160 Pressures, high, in producer-gas engines, 154 Water for producer-gas engines, 203 cache = ./cache/38415.txt txt = ./txt/38415.txt === reduce.pl bib === id = 39329 author = Baldwin Locomotive Works title = Illustrated Catalogue of Locomotives; Baldwin Locomotive Works date = pages = extension = .txt mime = text/plain words = 31050 sentences = 2299 flesch = 78 summary = locomotive engine and tender, built by Mr. Baldwin, of this city, Legislature decided to adopt steam-power for working the road, and Mr. Baldwin received orders for several additional locomotives. 2. A new mode of constructing the wheels of locomotive engines and in the wheels and tubes of locomotive engines. Mr. Baldwin's engine had the single pair of drivers patent for an eight-wheeled engine with four drivers connected, and a making engines with four drivers and a four-wheeled truck, of the The adoption of the plan of six-wheels-connected engines opened the completion of the first eight-wheeled "C" engine, Mr. Baldwin's [Illustration: Fig. 8.--BALDWIN EIGHT-WHEELS-CONNECTED ENGINE, 1846.] [Illustration: Fig. 8.--BALDWIN EIGHT-WHEELS-CONNECTED ENGINE, 1846.] ten-wheeled engine, with six drivers connected, had, however, now engines were constructed with a single pair of truck-wheels in front The ten wheeled engine thereafter assumed a place in the Baldwin worked by two of the Baldwin six-wheels-connected flexible-beam truck cache = ./cache/39329.txt txt = ./txt/39329.txt === reduce.pl bib === id = 32677 author = Cooper, Grace Rogers title = The Invention of the Sewing Machine date = pages = extension = .txt mime = text/plain words = 55146 sentences = 5316 flesch = 78 summary = The earliest American patent specifically recorded as a sewing machine based on it received the seventh United States sewing-machine patent. of the sewing-machine problems, Elias Howe began a series of patent In the patent, the machine was termed as "our new 'Rotary Sewing sewing-machine manufacture was the Singer Company, which overtook them Extension of His Sewing Machine Patent Dated September 10, 1846_, New [Illustration: Figure 48.--HEYER'S POCKET SEWING MACHINE patent model, 1860, Jan. 22, 1861, and July 18, 1863" and the Wilson patent date "Nov. 12, 1850." The machines from 1860-1863 are marked with the early Langdon [Illustration: Figure 95.--[A.C.] HERRON'S PATENT SEWING MACHINE, 1858. & Co., was called Howe's Improved Patent Sewing Machine. His machine was based on the patents of William Johnson, John manufacturing sewing-shears machines under the patent of J. [Illustration: Figure 122.--SINGER "New Family" sewing machine. [Illustration: Figure 122.--SINGER "New Family" sewing machine. cache = ./cache/32677.txt txt = ./txt/32677.txt === reduce.pl bib === id = 47762 author = Marten, Edward Bindon title = Records of Steam Boiler Explosions date = pages = extension = .txt mime = text/plain words = 52289 sentences = 7051 flesch = 86 summary = cylindrical boiler at Leicester, shown in Fig. 2., the real cause of This boiler, shown in Fig. 10., consisted of nine cast-iron pipes, about 1 foot diameter and 9 purpose was the Upright boiler with central tube, shown in Fig. 43, cylindrical boiler after explosion caused by corrosion along the whole the boiler have also caused explosion by stopping the supply of water. years, showing the causes of explosion of each form of boiler; and also water, undue pressure of steam, and scale or mud on the boiler plates. Another explosion was caused by working a boiler at more than few cases of explosion there was no pressure gauge on the boiler, or explosion was over-pressure for so old a boiler. The cause of explosion was undue pressure for an old boiler of pressure caused the boiler to rent open, but little damage was done. cache = ./cache/47762.txt txt = ./txt/47762.txt === reduce.pl bib === id = 47187 author = Hermann, Edward Adolph title = Steam Shovels and Steam Shovel Work date = pages = extension = .txt mime = text/plain words = 19133 sentences = 1364 flesch = 82 summary = These machines are used for excavating material, loading it on cars or [Illustration: Fig. 16.--Loading Earth from Steam Shovel Onto Cars.] side track, near the end of the cut, if the machine were to begin work Widening a Cut; Loading on a Side Track Graded by Hand or Steam.--The cut for the side track, on which the steam shovel is to load, either Other empty cars are placed in the pit track for loading next day, by then loaded on small dump cars standing on track A, and unloaded at D. in the cut for the steam shovel to load on is generally taken out by The steam shovel begins at A, Fig. 28, loading cars standing on the main track; the main line traffic loading cars on the main track, cutting to the line of the new grade, In through-cutting the material is loaded on small dump cars running cache = ./cache/47187.txt txt = ./txt/47187.txt === reduce.pl bib === id = 43375 author = Unknown title = Measuring Tools date = pages = extension = .txt mime = text/plain words = 15457 sentences = 868 flesch = 75 summary = for measuring, such as ordinary calipers, and their use; surface gages; To use this surface gage, the pointer marked _C_ in Fig. 9 is set to the To set dividers accurately, take a 1-inch micrometer and cut a line micrometer and set the dividers to the dot and line so as to give one inch the micrometer screw, and the barrel _B_ fits on its end, which is tapped Fig. 25 shows a 6-inch micrometer caliper designed for measuring from 0 to The micrometer screw itself has a travel of one inch, like any standard and has one inch adjustment of the measuring screw. adjusted on standard plugs, or one can make a set of gages up to 12 inches, chapter are tools and gages for measuring and comparing tapers, adjustable The tool shown in Fig. 51 is used for gaging taper threaded holes in cache = ./cache/43375.txt txt = ./txt/43375.txt === reduce.pl bib === id = 44604 author = Doughty, Frank W. title = How to Become an Engineer date = pages = extension = .txt mime = text/plain words = 19423 sentences = 1460 flesch = 87 summary = If one is a good locomotive engineer he can easily learn to manage In 1784 the famous Watt patented a steam locomotive engine in England, During the time the engine is under steam with a train, everything It is only while an engine is in steam and going at good speed that the A model engineer runs the most important trains, and he is never the When the engine has got the train up to speed, steam should begin to Either the engine is too small for its work or too great for its man, of box B, and when working the engine should steam issue from it when short length of pipe into the steam box of engine through a hole in the angle by the set-screw on the foot-plate of the engine shown at N, Fig. 2, the model will run in any sized circle you may wish without rails, cache = ./cache/44604.txt txt = ./txt/44604.txt === reduce.pl bib === id = 42369 author = Zerbe, James Slough title = Motors date = pages = extension = .txt mime = text/plain words = 46083 sentences = 3612 flesch = 78 summary = engine is a motor, and so, also, is a dynamo, a water wheel or a wind The most widely known and utilized source of power is the steam engine. The ends of the water and steam drums are connected by means of tubes F, exhaust of the steam engine is used to initially heat up the water, and Fig. 11 shows a simple diagram of a steam engine, so arranged that the engine shaft, and the pressure of the steam in the cylinder A, as it Suppose we divide the cylinder into six inch spaces, as shown in Fig. 13, then the pressure of the steam at the end of each six inches will be The upper end of the cylinder has a water space formed heat necessary to turn water into steam. 4. The circular motion of the steam engine into an electric current by cache = ./cache/42369.txt txt = ./txt/42369.txt === reduce.pl bib === id = 45932 author = Slauson, Harold Whiting title = The Gasoline Motor date = pages = extension = .txt mime = text/plain words = 33033 sentences = 1128 flesch = 62 summary = speed by the crank shaft of the motor, and as they are well lubricated two four-cylinder motors placed side by side and operating on the same As a rule, the two-cylinder, four-cycle motor is of a different type the crank shaft of the motor, it will be seen that the valves will the "T"-head type, having its valves operated by two cam shafts, care Not all cam shafts for operating the valves are located in the crank majority of motor car owners will rebabbitt the crank shaft bearings Many modern automobile motors are designed with the crank shaft running rods, but the large majority of motor car engines are provided with position of the crank shaft of the motor, and that consequently operating conditions of the same motor, by means of the needle valve. Each cylinder of a water-cooled motor is surrounded by a space known cache = ./cache/45932.txt txt = ./txt/45932.txt === reduce.pl bib === id = 46634 author = Trevithick, Francis title = Life of Richard Trevithick, with an Account of His Inventions. Volume 2 (of 2) date = pages = extension = .txt mime = text/plain words = 137395 sentences = 6650 flesch = 74 summary = boiler for the large pumping engine, 1806--Steam pressure--The Watt Government, 1810--Dolcoath engines and boilers--High steam to the Watt steamboat--Compound engines--Watt on high-pressure steam--Trevithick The Herland 33-inch pole high-pressure expansive steam puffer-engine To compare the Trevithick high-pressure steam pumping engine, with to the Watt low-pressure steam vacuum engine, with a 72-inch cylinder. was equal to Trevithick's 33-inch pole-engine, when worked with steam Trevithick's pole high-pressure steam-engine did fifty-seven millions; pole-engine, with a reduced steam pressure, worked a pump 14-1/2 inches the great engine_, and work with high-pressure steam and condenser, high-pressure steam-boiler was not ordered, and the Watt vacuum engine Trevithick having erected a high-pressure steam condensing whim-engine the high-pressure steam-engine did six times as much work with a bucket "That his high-pressure steam-engines work without condensing water, "That his high-pressure steam-engines work without condensing water, between the boiler and the working cylinder of the steam-engine a cache = ./cache/46634.txt txt = ./txt/46634.txt === reduce.pl bib === id = 56332 author = Moore, Bloomfield H., Mrs. title = Keely and His Discoveries: Aerial Navigation date = pages = extension = .txt mime = text/plain words = 141357 sentences = 5398 flesch = 57 summary = Creed," like the sympathetic etheric philosophy of Keely, reveals the with, etheric force--John Worrell Keely--which will in time remove manifestations of etheric force, as exhibited by Keely in producing as being free matter.--Franz Hartmann, M.D. John Worrell Keely--the discoverer of compound inter-etheric force, Keely has named this new modification of the one force in nature It has been said that when Keely's vibratory force shall have taken VIBRATORY SYMPATHETIC POLAR FLOWS.--KEELY'S CONTRIBUTIONS TO SCIENCE. years, Keely, this discoverer of unknown laws of nature, has been left dominion of the human mind over the forces of nature." In "Keely's All the forces of nature, writes Keely, proceed from the one governing The action of Nature's sympathetic flows, writes Keely, regulates the With Keely's claim, that latent force exists in all forms of matter, nature, now manifested by men of science in regard to Keely's of force and matter pointed the way to Keely's discoveries. cache = ./cache/56332.txt txt = ./txt/56332.txt === reduce.pl bib === id = 55428 author = Lardner, Dionysius title = The Steam Engine Familiarly Explained and Illustrated With an historical sketch of its invention and progressive improvement; its applications to navigation and railways; with plain axioms for railway speculators date = pages = extension = .txt mime = text/plain words = 109057 sentences = 4685 flesch = 65 summary = stated, that the latent heat, necessary to convert water into steam the same steam, the atmospheric pressure would force the water from heated, and the water formed by the condensed steam collects in a (34.) When the water is elevated to the engine, and the steam-vessels begin to act until a quantity of hot water, formed by condensed steam, steam, forms a quantity of hot water in the bottom of the cylinder, _steam engine_ in every sense; for the pressure above the piston was The method of working the valves of the double-acting steam engine, is place in steam vessels two engines, each of which works a crank: these steam used in common engines will contain about a cubic inch of water; In engines which do not condense the steam, and which, therefore, work (138.) The pressure of steam in the cylinder of an engine is always cache = ./cache/55428.txt txt = ./txt/55428.txt === reduce.pl bib === id = 60819 author = Lukin, James title = The Lathe & Its Uses Or, Instruction in the Art of Turning Wood and Metal. Including a Description of the Most Modern Appliances for the Ornamentation of Plane and Curved Surfaces. With an Appendix, in Which is Described an Entirely Novel Form of Lathe for Eccentric and Rose Engine Turning; a Lathe and Planing Machine Combined; and Other Valuable Matter Relating to the Art. date = pages = extension = .txt mime = text/plain words = 110635 sentences = 5244 flesch = 75 summary = work, but cut the chuck out neatly, screw and fit it, as previously better use first the round-ended tool, Fig. 60, but if you have worked and work, and cause the fixed tool to cut a spiral or screw thread on tool, the rest being placed close to the work, and only a light cut Fig. 130 is another form of boring tool for large and heavy work. what is meant by setting a slide rest, or hand tool to cut metal as it slide rest worked by hand, or to the large self-acting screw-cutting double slide rest, with a tool working at each side of the piece to and provide working drawings of the various screw cutting lathes to rest against the plate C, Fig. 206, which is cut out and screwed inch-long tools for ordinary work or for use with the eccentric chuck. cache = ./cache/60819.txt txt = ./txt/60819.txt === reduce.pl bib === id = 28160 author = White, John H. title = The 'Pioneer': Light Passenger Locomotive of 1851 United States Bulletin 240, Contributions from the Museum of History and Technology, paper 42, 1964 date = pages = extension = .txt mime = text/plain words = 10072 sentences = 638 flesch = 70 summary = THE "PIONEER": LIGHT PASSENGER LOCOMOTIVE OF 1851 These two locomotives became the Cumberland Valley Railroad's _Pioneer_ [Illustration: Figure 4.--MAP OF THE CUMBERLAND VALLEY Railroad as it least one other New England engine builder, the Taunton Locomotive [Illustration: Figure 6.--THE "UTILITY" AS REBUILT TO AN 8-WHEEL ENGINE, recent years, the Pennsylvania Railroad has stated the _Pioneer_ cost [Illustration: Figure 9.--ANNUAL PASS of the Cumberland Valley Railroad [Illustration: Figure 10.--TIMETABLE OF THE Cumberland Valley Railroad report of 1853 describes the _Pioneer_ as a six-wheel tank engine. [Illustration: Figure 18.--"PIONEER" LOCOMOTIVE, (1) Safety valve, (2) time the engine was built, it was usual to house these valves in an [Illustration: Figure 22.--"JENNY LIND," SISTER ENGINE of the _Pioneer_, [Illustration: Figure 27.--"PIONEER" LOCOMOTIVE. [Illustration: Figure 27.--"PIONEER" LOCOMOTIVE. Report_ of the Cumberland Valley Railroad of the style of valve gear used by each engine, states that the _Pioneer_ was equipped with a cache = ./cache/28160.txt txt = ./txt/28160.txt === reduce.pl bib === id = 22245 author = Bassett, Sara Ware title = Steve and the Steam Engine date = pages = extension = .txt mime = text/plain words = 60409 sentences = 4065 flesch = 83 summary = "So your father did not know you had the car out the other day?" said "How did Watt come to know so much about engines?" asked Stephen. "And did England begin to build railroads right away?" Steve inquired. It came to him in a flash that Stephen Tolman, the boy he In the meantime the Thanksgiving holidays were drawing near and Mr. Tolman suggested that he and Stephen should run over to New York for a Steve's father went to meet a business appointment, the boy was to take "Mr. Ackerman is coming right down," said he, addressing his father and It was with a sense of deep regret that Stephen bade good-by to Mr. Ackerman and Dick and returned to the hotel to join his father. chance for betterment had come his way Steve felt sure that the boy It was with genuine regret that Mr. Tolman and Stephen parted from Mr. Ackerman and Dick when the train reached New Haven. cache = ./cache/22245.txt txt = ./txt/22245.txt Building ./etc/reader.txt 39225 60819 10998 22657 39225 10998 number of items: 32 sum of words: 2,489,124 average size in words: 88,897 average readability score: 75 nouns: steam; work; engine; illustration; water; pressure; end; boiler; valve; tool; diameter; cylinder; wheel; line; inch; side; power; machine; inches; engines; time; piston; screw; motion; case; iron; air; point; surface; lathe; shaft; teeth; part; fig; position; centre; length; rod; heat; fire; hand; face; head; feed; amount; plate; feet; edge; piece; number verbs: is; be; are; was; have; being; has; made; shown; been; used; were; had; cut; having; set; given; required; do; cutting; make; placed; found; taken; turned; done; take; held; provided; employed; give; moved; put; does; turning; see; represents; called; working; prevent; applied; obtained; let; known; run; making; suppose; carried; move; become adjectives: other; same; such; small; necessary; great; first; high; large; true; more; equal; square; many; greater; proper; possible; good; different; little; less; latter; lower; long; new; ordinary; second; much; upper; full; right; sufficient; vertical; certain; similar; various; general; best; locomotive; main; flat; short; eccentric; double; single; several; low; straight; parallel; larger adverbs: not; then; so; very; up; as; thus; also; only; out; more; now; off; however; therefore; about; well; down; too; most; first; hence; again; much; together; even; back; usually; sometimes; far; still; just; nearly; in; on; always; long; instead; here; away; generally; already; over; often; enough; never; once; less; easily; all pronouns: it; its; i; he; his; we; they; their; you; them; your; him; our; my; itself; us; me; himself; her; themselves; she; one; yourself; myself; yours; ourselves; mine; herself; ours; p; theirs; elias; thee; ''em; t; |680|; y; w; u; thy; rule:--multiply; pin; o; e; |9,380; |883; |520|; |4,557; |360|; yd proper nouns: _; fig; |; c; b; mr.; ii; f; a.; a; q.; d; watt; keely; c.; trevithick; s; co.; e; g; b.; k; ||; new; .; l; t; crank; m; engine; steam; h; w.; j; machine; h.; j.; e.; d.; york; s.; f.; nut; london; john; diameter; p; pin; company; sewing keywords: illustration; fig; engine; steam; water; valve; mr.; work; cylinder; boiler; watt; pressure; new; inch; tool; screw; railroad; power; motor; gas; footnote; england; co.; york; united; turn; stephenson; states; shaft; professor; oil; machine; london; lathe; john; good; figure; figs; engineer; dr.; cut; cornish; company; boulton; american; young; woodcut; william; willcox; wilcox one topic; one dimension: fig file(s): ./cache/28166.txt titles(s): Installation and Operation Instructions For Custom Mark III CP Series Oil Fired Unit three topics; one dimension: fig; steam; valve file(s): ./cache/39225.txt, ./cache/46634.txt, ./cache/32677.txt titles(s): Modern Machine-Shop Practice, Volumes I and II | Life of Richard Trevithick, with an Account of His Inventions. Volume 2 (of 2) | The Invention of the Sewing Machine five topics; three dimensions: fig work illustration; steam engine water; keely gas force; valve machine steam; fig work tool file(s): ./cache/39225.txt, ./cache/22657.txt, ./cache/56332.txt, ./cache/32677.txt, ./cache/60819.txt titles(s): Modern Machine-Shop Practice, Volumes I and II | Steam, Its Generation and Use | Keely and His Discoveries: Aerial Navigation | The Invention of the Sewing Machine | The Lathe & Its Uses Or, Instruction in the Art of Turning Wood and Metal. Including a Description of the Most Modern Appliances for the Ornamentation of Plane and Curved Surfaces. With an Appendix, in Which is Described an Entirely Novel Form of Lathe for Eccentric and Rose Engine Turning; a Lathe and Planing Machine Combined; and Other Valuable Matter Relating to the Art. Type: gutenberg title: classification-TJ-gutenberg date: 2021-05-28 time: 17:05 username: emorgan patron: Eric Morgan email: emorgan@nd.edu input: classification:"TJ" ==== make-pages.sh htm files ==== make-pages.sh complex files ==== make-pages.sh named enities ==== making bibliographics id: 28166 author: Anonymous title: Installation and Operation Instructions For Custom Mark III CP Series Oil Fired Unit date: words: 2390.0 sentences: 302.0 pages: flesch: 81.0 cache: ./cache/28166.txt txt: ./txt/28166.txt summary: The Custom Mark III CP Series Oil Fired Unit is a high quality heating If external damage is noted, open the carton and _BEFORE REMOVING SHIPPING CARTON, LOCATE UNIT IN ITS FINAL POSITION_ burner end of the unit which is also the end where the return and flue locate unit as near chimney flue as possible in order to avoid use of a DO NOT PUSH AGAINST ANY PART OF JACKET OR OIL BURNER WHEN MOVING UNIT. TO MOVE UNIT, PUSH AGAINST _SKIDS, FLUE BOX OR SMOKE BOX_. Once the unit is in its proper location with the packing carton, skids While the unit is equipped with an induced draft fan, proper size vent _just below the flue pipe opening_, if the unit is attached to an 190 degrees then turn the limit control setting until the burner stops. The proper tension on the fuel unit belt drive is set at the factory. id: 34701 author: Anonymous title: Steam Engines date: words: 15882.0 sentences: 1039.0 pages: flesch: 76.0 cache: ./cache/34701.txt txt: ./txt/34701.txt summary: as shown by the lowered pressure and temperature of the steam, and work action of the steam in an engine cylinder, if no heat were lost by piston is moved forward by the expansion of the steam, the pressure method of obtaining steam engine indicator diagrams and measuring the The Ideal Work Diagram of a Steam Engine] exhaust valve opens and relieves the pressure acting on the piston. stroke of an engine the exhaust valve in front of the piston remains Constructing a Steam Engine Work Diagram] PRESSURE, CLEARANCE, CUT-OFF AND PISTON SPEED OF STEAM the work diagram of an engine is shown in Fig. 38. In the case of vertical engines, the low-pressure cylinder is sometimes Fig. 44 illustrates a moderate-speed engine of the four-valve type. graphically the work done in a steam engine cylinder during one stroke A common form of steam engine indicator is shown in Fig. 49. id: 4238 author: Babbage, Charles title: On the Economy of Machinery and Manufactures date: words: nan sentences: nan pages: flesch: nan cache: txt: summary: id: 22657 author: Babcock & Wilcox Company title: Steam, Its Generation and Use date: words: 154503.0 sentences: 12717.0 pages: flesch: 79.0 cache: ./cache/22657.txt txt: ./txt/22657.txt summary: The water at the temperature of steam at 100 pounds pressure durable and efficient steam generator, many types of water-tube boilers combustion space possible in practically any water-tube boiler. In a properly designed water-tube boiler steam may be raised from a cold Where the water throughout the boiler is at the temperature of the steam That the steam and water space of the Babcock & Wilcox boiler are the of the heat in the steam used is returned to the boiler with the water. The conditions of feed temperature and steam pressure in boiler tests, Let H = total heat of one pound of steam at boiler pressure, will contain 6 per cent more heat units above the fuel water temperature of fuel, the weight of flue gas per pound of coal, the heat lost in the amount of boiler-heating surface to generate steam. id: 39329 author: Baldwin Locomotive Works title: Illustrated Catalogue of Locomotives; Baldwin Locomotive Works date: words: 31050.0 sentences: 2299.0 pages: flesch: 78.0 cache: ./cache/39329.txt txt: ./txt/39329.txt summary: locomotive engine and tender, built by Mr. Baldwin, of this city, Legislature decided to adopt steam-power for working the road, and Mr. Baldwin received orders for several additional locomotives. 2. A new mode of constructing the wheels of locomotive engines and in the wheels and tubes of locomotive engines. Mr. Baldwin''s engine had the single pair of drivers patent for an eight-wheeled engine with four drivers connected, and a making engines with four drivers and a four-wheeled truck, of the The adoption of the plan of six-wheels-connected engines opened the completion of the first eight-wheeled "C" engine, Mr. Baldwin''s [Illustration: Fig. 8.--BALDWIN EIGHT-WHEELS-CONNECTED ENGINE, 1846.] [Illustration: Fig. 8.--BALDWIN EIGHT-WHEELS-CONNECTED ENGINE, 1846.] ten-wheeled engine, with six drivers connected, had, however, now engines were constructed with a single pair of truck-wheels in front The ten wheeled engine thereafter assumed a place in the Baldwin worked by two of the Baldwin six-wheels-connected flexible-beam truck id: 22245 author: Bassett, Sara Ware title: Steve and the Steam Engine date: words: 60409.0 sentences: 4065.0 pages: flesch: 83.0 cache: ./cache/22245.txt txt: ./txt/22245.txt summary: "So your father did not know you had the car out the other day?" said "How did Watt come to know so much about engines?" asked Stephen. "And did England begin to build railroads right away?" Steve inquired. It came to him in a flash that Stephen Tolman, the boy he In the meantime the Thanksgiving holidays were drawing near and Mr. Tolman suggested that he and Stephen should run over to New York for a Steve''s father went to meet a business appointment, the boy was to take "Mr. Ackerman is coming right down," said he, addressing his father and It was with a sense of deep regret that Stephen bade good-by to Mr. Ackerman and Dick and returned to the hotel to join his father. chance for betterment had come his way Steve felt sure that the boy It was with genuine regret that Mr. Tolman and Stephen parted from Mr. Ackerman and Dick when the train reached New Haven. id: 10998 author: Bourne, John, C. E. title: A Catechism of the Steam Engine date: words: 147256.0 sentences: 7014.0 pages: flesch: 72.0 cache: ./cache/10998.txt txt: ./txt/10998.txt summary: _A._--In a high pressure engine the steam, after having pushed the piston issue of steam to the engine is diminished; and the pressure in the boiler of a steam vessel, and increase the power of your engine by placing a boiler are two horizontal cylinders fitted with pistons, valves, connecting _Q._--Then in a steam vessel the valve of one engine may be worked engines: multiply the square of the diameter of the cylinder in inches by case of a 45 horse power boiler the total heating surface is 438 square steam through the safety valve in low pressure engines? cold water pump in cubic inches when the engine is double acting, and the valve placed on the feed pipe between the engine and the boilers, which horse power engine, with cylinder 6 inches diameter, pressure of steam 45 condensing engine with cylinder 56 inches diameter, 10 feet stroke, and id: 27687 author: Collins, Hubert E. (Hubert Edwin) title: Steam Turbines A Book of Instruction for the Adjustment and Operation of the Principal Types of this Class of Prime Movers date: words: 34273.0 sentences: 1634.0 pages: flesch: 67.0 cache: ./cache/27687.txt txt: ./txt/27687.txt summary: closing of the admission valves under the control of a governor (Fig. 19), of the spring-weighted type attached directly to the top end of the steam-pipe at C and passes through the main throttle or regulating valve up by the rotary oil pump on the turbine; turning the water on to the the turbine has stopped, shutting down the auxiliary oil pump, turning In any case a small amount of the steaming water will pass by the gland so desired, the oil-cooling water may come from the circulating pumps of In the operation of the turbine and the conditions of the steam, both V. PROPER METHOD OF TESTING A STEAM TURBINE[3] V. PROPER METHOD OF TESTING A STEAM TURBINE[3] Although steam leakage through the valves of a turbine may not necessary to run the turbine up to speed, turn on the oil, and then, high-pressure steam pipe, nor any of the turbine valves. id: 24441 author: Connor, W. J. title: The Stoker's Catechism date: words: nan sentences: nan pages: flesch: nan cache: txt: summary: id: 32677 author: Cooper, Grace Rogers title: The Invention of the Sewing Machine date: words: 55146.0 sentences: 5316.0 pages: flesch: 78.0 cache: ./cache/32677.txt txt: ./txt/32677.txt summary: The earliest American patent specifically recorded as a sewing machine based on it received the seventh United States sewing-machine patent. of the sewing-machine problems, Elias Howe began a series of patent In the patent, the machine was termed as "our new ''Rotary Sewing sewing-machine manufacture was the Singer Company, which overtook them Extension of His Sewing Machine Patent Dated September 10, 1846_, New [Illustration: Figure 48.--HEYER''S POCKET SEWING MACHINE patent model, 1860, Jan. 22, 1861, and July 18, 1863" and the Wilson patent date "Nov. 12, 1850." The machines from 1860-1863 are marked with the early Langdon [Illustration: Figure 95.--[A.C.] HERRON''S PATENT SEWING MACHINE, 1858. & Co., was called Howe''s Improved Patent Sewing Machine. His machine was based on the patents of William Johnson, John manufacturing sewing-shears machines under the patent of J. [Illustration: Figure 122.--SINGER "New Family" sewing machine. [Illustration: Figure 122.--SINGER "New Family" sewing machine. id: 44604 author: Doughty, Frank W. title: How to Become an Engineer date: words: 19423.0 sentences: 1460.0 pages: flesch: 87.0 cache: ./cache/44604.txt txt: ./txt/44604.txt summary: If one is a good locomotive engineer he can easily learn to manage In 1784 the famous Watt patented a steam locomotive engine in England, During the time the engine is under steam with a train, everything It is only while an engine is in steam and going at good speed that the A model engineer runs the most important trains, and he is never the When the engine has got the train up to speed, steam should begin to Either the engine is too small for its work or too great for its man, of box B, and when working the engine should steam issue from it when short length of pipe into the steam box of engine through a hole in the angle by the set-screw on the foot-plate of the engine shown at N, Fig. 2, the model will run in any sized circle you may wish without rails, id: 19133 author: Gregory, Charles Hutton title: Practical Rules for the Management of a Locomotive Engine in the Station, on the Road, and in cases of Accident date: words: 6464.0 sentences: 210.0 pages: flesch: 62.0 cache: ./cache/19133.txt txt: ./txt/19133.txt summary: the stuffing-boxes of the piston-rod and slide-valve spindle, or of water Engine-man were required to deliver to the Superintendent of the Station Water is supplied by opening the cocks in the feed-pipes, which allow the Engine-man has the power of regulating the height of the water in the The water is higher when the Engine is running than when stopping: a good working height for it in most Engines is when _water_ blows off from the middle cock while running, and _water and steam_ when stopping: an Engine-man is sometimes obliged to run the water rather lower, if he has Coke is put on the fire by the Stoker, at the order of the Engine-man, turn off the feed-pumps, the steam slightly blowing off, and the Engine The Engine-man should frequently look to the working gear, to see that it In a six-wheeled Engine it requires the stoppage of the train until id: 47187 author: Hermann, Edward Adolph title: Steam Shovels and Steam Shovel Work date: words: 19133.0 sentences: 1364.0 pages: flesch: 82.0 cache: ./cache/47187.txt txt: ./txt/47187.txt summary: These machines are used for excavating material, loading it on cars or [Illustration: Fig. 16.--Loading Earth from Steam Shovel Onto Cars.] side track, near the end of the cut, if the machine were to begin work Widening a Cut; Loading on a Side Track Graded by Hand or Steam.--The cut for the side track, on which the steam shovel is to load, either Other empty cars are placed in the pit track for loading next day, by then loaded on small dump cars standing on track A, and unloaded at D. in the cut for the steam shovel to load on is generally taken out by The steam shovel begins at A, Fig. 28, loading cars standing on the main track; the main line traffic loading cars on the main track, cutting to the line of the new grade, In through-cutting the material is loaded on small dump cars running id: 34030 author: Jones, Franklin Day title: Turning and Boring A specialized treatise for machinists, students in the industrial and engineering schools, and apprentices, on turning and boring methods, including modern practice with engine lathes, turret lathes, vertical and horizontal boring machines date: words: 87912.0 sentences: 4925.0 pages: flesch: 77.0 cache: ./cache/34030.txt txt: ./txt/34030.txt summary: Tool--Turning Work Cylindrical--Roughing and Finishing Facing End with Side-tool and Turning Work The turning tool is started at the right-hand end of the work and the entire length, and when the tool has arrived at say position _x_, Fig. 5, it is returned to the starting point and the work is reversed in the LATHE TURNING TOOLS AND CUTTING SPEEDS LATHE TURNING TOOLS AND CUTTING SPEEDS Set of Lathe Turning Tools for General Work] =The Position of Turning Tools.=--The production of accurate lathe work in Fig. 1, the work will then be turned tapering as the tool is turned to the required form with a special tool having a cutting edge When threads are cut in the lathe a tool _t_ is used (see Fig. 2), The outside of the wheel rim is next finish-turned with cutter _V_ (Fig. 5) held in an extension turret tool-holder the same as the roughing id: 55428 author: Lardner, Dionysius title: The Steam Engine Familiarly Explained and Illustrated With an historical sketch of its invention and progressive improvement; its applications to navigation and railways; with plain axioms for railway speculators date: words: 109057.0 sentences: 4685.0 pages: flesch: 65.0 cache: ./cache/55428.txt txt: ./txt/55428.txt summary: stated, that the latent heat, necessary to convert water into steam the same steam, the atmospheric pressure would force the water from heated, and the water formed by the condensed steam collects in a (34.) When the water is elevated to the engine, and the steam-vessels begin to act until a quantity of hot water, formed by condensed steam, steam, forms a quantity of hot water in the bottom of the cylinder, _steam engine_ in every sense; for the pressure above the piston was The method of working the valves of the double-acting steam engine, is place in steam vessels two engines, each of which works a crank: these steam used in common engines will contain about a cubic inch of water; In engines which do not condense the steam, and which, therefore, work (138.) The pressure of steam in the cylinder of an engine is always id: 39033 author: Low, David Allan title: An Introduction to Machine Drawing and Design date: words: 27226.0 sentences: 2731.0 pages: flesch: 88.0 cache: ./cache/39033.txt txt: ./txt/39033.txt summary: views of the _double riveted lap joint_ shown in fig. times full size the sections of screw threads as shown in fig. EXERCISE 12.--Draw, full size, the views shown in fig. square nut and bolt with countersunk head shown in fig. bolt for a marine shaft coupling shown in fig. The cast-iron flange coupling is shown in fig. EXERCISE 24: _Cast-iron Flange Coupling._--Draw the views shown in 24 of a cast-iron flange coupling, for a shaft 4-1/2 inches in EXERCISE 26: _Pillow Block for a Four-inch Shaft._--Draw the views EXERCISE 29: _Shaft Hanger._--Draw the two elevations shown in is secured as shown by an iron pin 5/16 inch diameter. EXERCISE 43: _Marine Connecting Rod._--Draw all the views shown in EXERCISE 44: _Coupling Rod End._--Draw first the side elevation and An example of a steam-engine cross-head is shown in fig. sectional elevation of the piston, &c., shown in fig. id: 60819 author: Lukin, James title: The Lathe & Its Uses Or, Instruction in the Art of Turning Wood and Metal. Including a Description of the Most Modern Appliances for the Ornamentation of Plane and Curved Surfaces. With an Appendix, in Which is Described an Entirely Novel Form of Lathe for Eccentric and Rose Engine Turning; a Lathe and Planing Machine Combined; and Other Valuable Matter Relating to the Art. date: words: 110635.0 sentences: 5244.0 pages: flesch: 75.0 cache: ./cache/60819.txt txt: ./txt/60819.txt summary: work, but cut the chuck out neatly, screw and fit it, as previously better use first the round-ended tool, Fig. 60, but if you have worked and work, and cause the fixed tool to cut a spiral or screw thread on tool, the rest being placed close to the work, and only a light cut Fig. 130 is another form of boring tool for large and heavy work. what is meant by setting a slide rest, or hand tool to cut metal as it slide rest worked by hand, or to the large self-acting screw-cutting double slide rest, with a tool working at each side of the piece to and provide working drawings of the various screw cutting lathes to rest against the plate C, Fig. 206, which is cut out and screwed inch-long tools for ordinary work or for use with the eccentric chuck. id: 11164 author: Maggard, James H. title: Rough and Tumble Engineering date: words: 38347.0 sentences: 2073.0 pages: flesch: 84.0 cache: ./cache/11164.txt txt: ./txt/11164.txt summary: engineer would not have made a good water boy, for the reason that he might have to learn too fast, in order to get the engine running in good know but that a boy without a head is about as good as an engineer with oiled and in a day or two ten pounds will start the empty engine in good is a good engineer, he does not know whether the pump is throwing more allow water to pass through it one way only, if it is in good working If your engine is fitted with both cross head pump and injector, you use the injector for pumping water when the engine is not running. engineers, when they want a little extra power, give the safety valve a running an engine with a safety plug seldom stops for a load of water A. If the pressure on boiler is 60 pounds, and the engine is id: 47762 author: Marten, Edward Bindon title: Records of Steam Boiler Explosions date: words: 52289.0 sentences: 7051.0 pages: flesch: 86.0 cache: ./cache/47762.txt txt: ./txt/47762.txt summary: cylindrical boiler at Leicester, shown in Fig. 2., the real cause of This boiler, shown in Fig. 10., consisted of nine cast-iron pipes, about 1 foot diameter and 9 purpose was the Upright boiler with central tube, shown in Fig. 43, cylindrical boiler after explosion caused by corrosion along the whole the boiler have also caused explosion by stopping the supply of water. years, showing the causes of explosion of each form of boiler; and also water, undue pressure of steam, and scale or mud on the boiler plates. Another explosion was caused by working a boiler at more than few cases of explosion there was no pressure gauge on the boiler, or explosion was over-pressure for so old a boiler. The cause of explosion was undue pressure for an old boiler of pressure caused the boiler to rent open, but little damage was done. id: 38415 author: Mathot, Rodolphe Edgard title: Gas-Engines and Producer-Gas Plants A Practice Treatise Setting Forth the Principles of Gas-Engines and Producer Design, the Selection and Installation of an Engine, Conditions of Perfect Operation, Producer-Gas Engines and Their Possibilities, the Care of Gas-Engines and Producer-Gas Plants, with a Chapter on Volatile Hydrocarbon and Oil Engines date: words: 61829.0 sentences: 3655.0 pages: flesch: 65.0 cache: ./cache/38415.txt txt: ./txt/38415.txt summary: OF PERFECT OPERATION, PRODUCER-GAS ENGINES AND THEIR POSSIBILITIES, THE oil engines, gas producers and gas plants generally for many years past. Gas-Producer.--Starting the Engine.--Care of the Generator 60 revolutions per minute, with a 50 horse-power producer-gas engine, of the gas-engine the cost of the producer, foundation, and the like, it to the wide introduction of producer gas engines even for small power. Electric ignition is effected in gas-engines by means of a battery and For engines driven by producer-gas magneto-igniters are cylinder a mixture of air and gas, ignited at the proper time by strokes of the engine, consists in providing the gas-supply pipe with in producer-gas engines is an excess of cylinder-lubricant likely to producer-gas engines, pressures of 114 to 170 pounds per square inch and operation of producer-gas engines. Pressure in producer-gas engines, 160 Pressures, high, in producer-gas engines, 154 Water for producer-gas engines, 203 id: 56332 author: Moore, Bloomfield H., Mrs. title: Keely and His Discoveries: Aerial Navigation date: words: 141357.0 sentences: 5398.0 pages: flesch: 57.0 cache: ./cache/56332.txt txt: ./txt/56332.txt summary: Creed," like the sympathetic etheric philosophy of Keely, reveals the with, etheric force--John Worrell Keely--which will in time remove manifestations of etheric force, as exhibited by Keely in producing as being free matter.--Franz Hartmann, M.D. John Worrell Keely--the discoverer of compound inter-etheric force, Keely has named this new modification of the one force in nature It has been said that when Keely''s vibratory force shall have taken VIBRATORY SYMPATHETIC POLAR FLOWS.--KEELY''S CONTRIBUTIONS TO SCIENCE. years, Keely, this discoverer of unknown laws of nature, has been left dominion of the human mind over the forces of nature." In "Keely''s All the forces of nature, writes Keely, proceed from the one governing The action of Nature''s sympathetic flows, writes Keely, regulates the With Keely''s claim, that latent force exists in all forms of matter, nature, now manifested by men of science in regard to Keely''s of force and matter pointed the way to Keely''s discoveries. id: 476 author: Nasmyth, James title: James Nasmyth, Engineer: An Autobiography date: words: nan sentences: nan pages: flesch: nan cache: txt: summary: id: 39225 author: Rose, Joshua title: Modern Machine-Shop Practice, Volumes I and II date: words: 854595.0 sentences: 49441.0 pages: flesch: 82.0 cache: ./cache/39225.txt txt: ./txt/39225.txt summary: the step within the work holds the tooth to its cut, as shown in Fig. 330, in which N represents a nut and T the tap, both in section. diameter of work conical or taper instead of parallel is shown in Fig. 498: P and P'' are square-headed screws threaded into the walls of A and each tool shall carry its cut along the work, is shown in Fig. 711. In roughing out coarse threads, a single-pointed tool, formed as in Fig. 998, and set considerably above the centre as shown, may be used to or table whereon to rest the work and hold it fair is shown in Fig. 1067, the taper shank fitting in the dead centre hole and the tailstock Under ordinary conditions that in the form of tool shown in Fig. 1113[15] is best for brass work, the face A being horizontal or slightly id: 27286 author: Runciman, Walter C. title: Gas and Oil Engines, Simply Explained An Elementary Instruction Book for Amateurs and Engine Attendants date: words: 14875.0 sentences: 755.0 pages: flesch: 73.0 cache: ./cache/27286.txt txt: ./txt/27286.txt summary: form the now well-known cycle upon which most gas engines work at the two main castings--the bed and cylinder--a small engine, generally causing them to open and close at the proper time, are shown in fig. both air _and_ gas valve are opened on the charging stroke; that depends The gas and air valve are shown as both being operated by the same In this case the governor lever only operates the gas valve; the air valve being opened on every charging or suction stroke, whether gas is operate both air and gas valves, and so one cam only is necessary; but With the gas, as with any other kind of engine, the valve settings are when the gas, air, and exhaust valves open and close respectively, under governor is fitted to the air valve lever, as in fig. with small high-speed engines fitted with suction air valve, the vacuum id: 45932 author: Slauson, Harold Whiting title: The Gasoline Motor date: words: 33033.0 sentences: 1128.0 pages: flesch: 62.0 cache: ./cache/45932.txt txt: ./txt/45932.txt summary: speed by the crank shaft of the motor, and as they are well lubricated two four-cylinder motors placed side by side and operating on the same As a rule, the two-cylinder, four-cycle motor is of a different type the crank shaft of the motor, it will be seen that the valves will the "T"-head type, having its valves operated by two cam shafts, care Not all cam shafts for operating the valves are located in the crank majority of motor car owners will rebabbitt the crank shaft bearings Many modern automobile motors are designed with the crank shaft running rods, but the large majority of motor car engines are provided with position of the crank shaft of the motor, and that consequently operating conditions of the same motor, by means of the needle valve. Each cylinder of a water-cooled motor is surrounded by a space known id: 35916 author: Thurston, Robert Henry title: A History of the Growth of the Steam-Engine date: words: 144715.0 sentences: 6969.0 pages: flesch: 67.0 cache: ./cache/35916.txt txt: ./txt/35916.txt summary: The engine was worked as follows: Steam is raised in the boiler, _B_, as the steam-engine in its new form was pushed into use by his energy whole time that the engine is at work, be kept as hot as the steam steam-engine a success until this time, when mechanics were just working steam, and their earlier Soho engines were, as Watt said, made connected with the steam-cylinder of the engine by a small pipe Steam-Engineer''s Guide," and a work which remained standard many years This engine had a steam-cylinder 28 inches in diameter, and 6 feet that the power of the Steam-Engine may be applied to work the wheels." form of steam-engine, and made a successful working-model, was various forms of steam-engine, some working direct, and some geared to The form of steam-engine in most general use at this time, on pumping-engine; it was, at once, boiler, steam-cylinder, and id: 17783 author: Traveling Engineers'' Association title: The Traveling Engineers'' Association to Improve the Locomotive Engine Service of American Railroads Examination Questions and Answers for Firemen for Promotion and New Men for Employment date: words: 58318.0 sentences: 5329.0 pages: flesch: 84.0 cache: ./cache/17783.txt txt: ./txt/17783.txt summary: A. Close the main steam valve at the boiler, that will stop the leak if A. The brake pipe pressure begins at the feed valve and ends at the the brake pipe, air from the main reservoir flows to the triple valves of the cylinder, the steam valve opens communication to the exhaust port use live steam in low-pressure cylinder only, for the broken piston. A. Remove the broken piston valve, reduce boiler pressure to 100 pounds piston rod in the air end, or the main valve stuck in its position at Q. What defect in the feed valve will cause the brake pipe pressure valves to release position, thus allowing the brake cylinder air to pressure on the brake pipe side of the triple valve piston 4 above that A. In release position of the brake valve, air from the main reservoir A. In release position of the brake valve, air from the main reservoir id: 46634 author: Trevithick, Francis title: Life of Richard Trevithick, with an Account of His Inventions. Volume 2 (of 2) date: words: 137395.0 sentences: 6650.0 pages: flesch: 74.0 cache: ./cache/46634.txt txt: ./txt/46634.txt summary: boiler for the large pumping engine, 1806--Steam pressure--The Watt Government, 1810--Dolcoath engines and boilers--High steam to the Watt steamboat--Compound engines--Watt on high-pressure steam--Trevithick The Herland 33-inch pole high-pressure expansive steam puffer-engine To compare the Trevithick high-pressure steam pumping engine, with to the Watt low-pressure steam vacuum engine, with a 72-inch cylinder. was equal to Trevithick''s 33-inch pole-engine, when worked with steam Trevithick''s pole high-pressure steam-engine did fifty-seven millions; pole-engine, with a reduced steam pressure, worked a pump 14-1/2 inches the great engine_, and work with high-pressure steam and condenser, high-pressure steam-boiler was not ordered, and the Watt vacuum engine Trevithick having erected a high-pressure steam condensing whim-engine the high-pressure steam-engine did six times as much work with a bucket "That his high-pressure steam-engines work without condensing water, "That his high-pressure steam-engines work without condensing water, between the boiler and the working cylinder of the steam-engine a id: 43375 author: Unknown title: Measuring Tools date: words: 15457.0 sentences: 868.0 pages: flesch: 75.0 cache: ./cache/43375.txt txt: ./txt/43375.txt summary: for measuring, such as ordinary calipers, and their use; surface gages; To use this surface gage, the pointer marked _C_ in Fig. 9 is set to the To set dividers accurately, take a 1-inch micrometer and cut a line micrometer and set the dividers to the dot and line so as to give one inch the micrometer screw, and the barrel _B_ fits on its end, which is tapped Fig. 25 shows a 6-inch micrometer caliper designed for measuring from 0 to The micrometer screw itself has a travel of one inch, like any standard and has one inch adjustment of the measuring screw. adjusted on standard plugs, or one can make a set of gages up to 12 inches, chapter are tools and gages for measuring and comparing tapers, adjustable The tool shown in Fig. 51 is used for gaging taper threaded holes in id: 25454 author: White, John H. title: Introduction of the Locomotive Safety Truck Contributions from the Museum of History and Technology: Paper 24 date: words: nan sentences: nan pages: flesch: nan cache: txt: summary: id: 28160 author: White, John H. title: The ''Pioneer'': Light Passenger Locomotive of 1851 United States Bulletin 240, Contributions from the Museum of History and Technology, paper 42, 1964 date: words: 10072.0 sentences: 638.0 pages: flesch: 70.0 cache: ./cache/28160.txt txt: ./txt/28160.txt summary: THE "PIONEER": LIGHT PASSENGER LOCOMOTIVE OF 1851 These two locomotives became the Cumberland Valley Railroad''s _Pioneer_ [Illustration: Figure 4.--MAP OF THE CUMBERLAND VALLEY Railroad as it least one other New England engine builder, the Taunton Locomotive [Illustration: Figure 6.--THE "UTILITY" AS REBUILT TO AN 8-WHEEL ENGINE, recent years, the Pennsylvania Railroad has stated the _Pioneer_ cost [Illustration: Figure 9.--ANNUAL PASS of the Cumberland Valley Railroad [Illustration: Figure 10.--TIMETABLE OF THE Cumberland Valley Railroad report of 1853 describes the _Pioneer_ as a six-wheel tank engine. [Illustration: Figure 18.--"PIONEER" LOCOMOTIVE, (1) Safety valve, (2) time the engine was built, it was usual to house these valves in an [Illustration: Figure 22.--"JENNY LIND," SISTER ENGINE of the _Pioneer_, [Illustration: Figure 27.--"PIONEER" LOCOMOTIVE. [Illustration: Figure 27.--"PIONEER" LOCOMOTIVE. Report_ of the Cumberland Valley Railroad of the style of valve gear used by each engine, states that the _Pioneer_ was equipped with a id: 42369 author: Zerbe, James Slough title: Motors date: words: 46083.0 sentences: 3612.0 pages: flesch: 78.0 cache: ./cache/42369.txt txt: ./txt/42369.txt summary: engine is a motor, and so, also, is a dynamo, a water wheel or a wind The most widely known and utilized source of power is the steam engine. The ends of the water and steam drums are connected by means of tubes F, exhaust of the steam engine is used to initially heat up the water, and Fig. 11 shows a simple diagram of a steam engine, so arranged that the engine shaft, and the pressure of the steam in the cylinder A, as it Suppose we divide the cylinder into six inch spaces, as shown in Fig. 13, then the pressure of the steam at the end of each six inches will be The upper end of the cylinder has a water space formed heat necessary to turn water into steam. 4. The circular motion of the steam engine into an electric current by ==== make-pages.sh questions ==== make-pages.sh search ==== make-pages.sh topic modeling corpus Zipping study carrel