id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
14664	Williams, Archibald	Things To Make			.txt	text/plain	71040	4215	82	legs, and at a point 4 inches from one end run off at an angle of 162 Draw cross lines with your square 3 inches from each end of both pieces, on The Connecting Rod.--Bore a hole near the end of the plunger for a screw Centre line of piston rod, 1-1/4 inches laterally from near edge of bed; We begin by cutting out of 1/20-inch sheet brass a piece shaped as in Fig. 60. exact centres drill 1/8-inch holes, and cut the pieces squarely in two For the boiler use a piece of brass tubing 4 inches or so in diameter and 3 The steam-pipe is a circle of 5/16-inch copper tube, having one end 1/2-inch cross tubes, set as indicated by the end view (Fig. 83), and 3/4 elbow, a piece of 5/16-inch brass tube, and a round tin box holding about Next cut two 1/4-inch pieces off a tube which fits the spindle.	./cache/14664.txt	./txt/14664.txt