id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
15460	Milton, Archie Seldon	A Course In Wood Turning			.txt	text/plain	14603	1073	87	application of cuts in exercises that involve only face-plate work; involving spindle turning, face-plate work and chucking; (V) Spiral 6. Lay the skew chisel on the rest with the cutting edge above the live center end, until it is cut free and the cylinder stops in the Place the chisel square on the tool rest so that the cutting edge is chisel so that the grind, which forms the cutting edge, is at an angle Place the chisel on the rest, with the cutting edge above the cylinder the other off-center points and the second side is cut down to the line. center or cutting point of the tools used, when held parallel to the bed in the same manner as in squaring the ends of Stock in cylinder work. then cut out by hand with a chisel or knife, by working down the wood on	./cache/15460.txt	./txt/15460.txt