id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
work_kzvr63abvncexodi4czyqwcfwm	Olga Ogorodnyk	Towards a general application programming interface (API) for injection molding machines	2020	20	.pdf	application/pdf	7908	795	57	interface (API) for injection molding machines (IMMs), which has the potential to be used with different IMMs to log and set the necessary process parameter values. Industrial Raspberry Pi (RevPi) was used to perform analog-todigital signal conversion and make sensors data accessible via the API prototype. Keywords Application programming interface (API), Data acquisition system, Injection molding, analysis of data from different manufacturing processes and injection molding is no Towards a general application programming interface (API) for injection molding machines. The frequencies for logging the IMM and mold data may differ depending on the the necessary parameters data is accessed on the IMM and logged from the additional sampling rates, the API was installed on the RevPi, where three different processes needed IMMs of other manufacturers; testing of the system with other injection molding machines; of the open API prototype for injection molding machines. as allow connection with RevPi for data acquisition from sensors installed in a mold.	./cache/work_kzvr63abvncexodi4czyqwcfwm.pdf	./txt/work_kzvr63abvncexodi4czyqwcfwm.txt