id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
cord-289541-y7lewk1t	Zhang, Li-Zhi	Fabrication of a lithium chloride solution based composite supported liquid membrane and its moisture permeation analysis	2006-05-01		.txt	text/plain	4040	292	60	The membrane is composed of three layers: two hydrophobic protective layers and a sandwiched hydrophilic support layer in which LiCl solution is immobilized to facilitate water vapor transfer. Further, the supported liquid layer only accounts for 12% of the total moisture transfer resistance in the cell, indicating that there is much potential for further performance improvement. The core material of an MTHR ventilator are vapor-permeable membranes, therefore both heat and moisture are transferred between these two air streams when they flow through the unit. However, moisture diffusion coefficients in such polymer membranes are usually very low, in the order of 10 −12 to 10 −13 m 2 s −1 [11, 18] , while MTHR ventilators only have limited transmembrane vapor partial pressure difference, consequently performances are quite limited currently. To improve the performances of MTHR ventilators, in this study, a novel membrane, a composite SLM, which employs LiCl liquid solution immobilized in a porous support membrane to facilitate the transport of moisture, is prepared.	./cache/cord-289541-y7lewk1t.txt	./txt/cord-289541-y7lewk1t.txt