key: cord-332828-a4ck2ddp authors: Alboaneen, Dabiah; Pranggono, Bernardi; Alshammari, Dhahi; Alqahtani, Nourah; Alyaffer, Raja title: Predicting the Epidemiological Outbreak of the Coronavirus Disease 2019 (COVID-19) in Saudi Arabia date: 2020-06-25 journal: Int J Environ Res Public Health DOI: 10.3390/ijerph17124568 sha: doc_id: 332828 cord_uid: a4ck2ddp The coronavirus diseases 2019 (COVID-19) outbreak continues to spread rapidly across the world and has been declared as pandemic by World Health Organization (WHO). Saudi Arabia was among the countries that was affected by the deadly and contagious virus. Using a real-time data from 2 March 2020 to 15 May 2020 collected from Saudi Ministry of Health, we aimed to give a local prediction of the epidemic in Saudi Arabia. We used two models: the Logistic Growth and the Susceptible-Infected-Recovered for real-time forecasting the confirmed cases of COVID-19 across Saudi Arabia. Our models predicted that the epidemics of COVID-19 will have total cases of 69,000 to 79,000 cases. The simulations also predicted that the outbreak will entering the final-phase by end of June 2020. Coronaviruses are a large family of viruses that are distributed among humans and animals such as livestock, birds, bats and other wild animals. These viruses cause serious illnesses for human when infecting respiratory, hepatic, gastrointestinal and neurological [1] [2] [3] . In December 2019, China notified the World Health Organization (WHO) about a novel coronavirus-severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)-that caused many cases of respiratory illnesses that were mostly related to people who had visited a live animal seafood market in Wuhan city [4] . The disease, now formally called COVID-19 (coronavirus disease 2019), caused an outbreak of a typical pneumonia through human-to-human transmission starting from Wuhan, a highly populated city with more than eleven million residents, then rapidly spread in China [5] . The Chinese authority put Wuhan city and several cities in Hubei province on lockdown, and all the public transportation was stopped to prevent any further spread of the virus [6, 7] . However, the confirmed cases have increased daily in China and in many countries around the globe. On 11 March 2020, WHO officially declared COVID-19 outbreak as a global pandemic as the virus has spread to well over 200 countries around the world [8] . To date, COVID-19 has infected more than 4.5 million people and killed over 300,000 people across the world [8] . Saudi Arabia was among the countries that was affected by the virus. On 2 March 2020, the Saudi Ministry of Health reported the first confirmed COVID-19 case in the country. From the beginning of March, the number of confirmed COVID-19 cases gradually increased and the highest number of cases reported in one day was 2307 on 15 May 2020 with a total of 49,176 confirmed cases of COVID-19 infections and 292 deaths have been confirmed in Saudi Arabia (see Figure 1 ). (a) Confirmed cases (b) Recovered cases (c) Deaths cases Mathematical models and simulations are considered an important tools to predict the possibility and severity of disease outbreak and provide main information for determining the type and intensity of disease intervention. Resulting in decreasing the transmission of the diseases and a more accurate approaches to manage the epidemic. Recently, mathematical modeling has been used to predict epidemics such as Foot-and-Mouth Disease (FMD), SARS, Zika and Ebola [9] [10] [11] [12] . This article aims to give a local prediction of the epidemic peak for COVID-19 in Saudi Arabia by using the real-time data from 2 March 2020 to 15 May 2020. The remainder of this article is arranged as follows. Section 2 presents the related work on COVID-19. Section 3 describes data and the models used in prediction of the epidemic peak for COVID-19 in Saudi Arabia. Section 4 presents our simulation results. Finally, Section 5 draws the conclusion. In [13] , a model called FPASSA-ANFIS was proposed to predict the number of the confirmed COVID-19 cases for the upcoming 10 days after previous cases until 8 February 2020 in China in order to take the right course of action. The main idea of the model was to enhance the performance of Adaptive Neuro-Fuzzy Inference System (ANFIS) using parameters from the output of FPASSA, namely, Flower Pollination Algorithm (FPA) and Salp Swarm Algorithm (SSA). The result of the model was outstanding with regards to Mean Absolute Percentage Error, Root Mean Squared Relative Error, Root Mean Squared Relative Error, and coefficient of determination (R 2 ). Moreover, the proposed model was evaluated with two other data sets, and the result showed good performance. In [14] , the end and the infection turning point of the COVID-19 epidemic in China and Hubei Province were predicted. A proper model was used and parameterized with the latest data of the daily and total infections in Hubei and China from NHC. The model predicted the end of the epidemic to be after March 10 with 51,600 infections, while the daily case turning points were predicted to be between 1 and 6 February 2020. Roosa et al. in [15] generated a real-time prediction of cumulative confirmed COVID-19 cases in Hubei and China in general for the few upcoming days after 5 and 9 February 2020. They used three phenomenological models that were previously utilized to predict the epidemics of several other diseases. These models were the Generalized Logistic Growth model, Richards model, and sub-epidemic wave model. The models predicted that the average number of the additional cases would be from 7409 to 7496 in Hubei and 1128 to 1929 in China. Moreover, they concluded that by the end of 24 February, the predicted cases would be from 37,415 to 38,028 in Hubei and 11,588 to 13,499 in China. In [16] , the Case Fatality Rate (CFR) for COVID-19 in China was measured. They collected the confirmed and death cases from 10 January to 3 February then applied simple statistics technique such as linear regression to find the estimation. They found that the CFR of novel COVID-19 is lower than those of the previous SARS-CoV and Middle East Respiratory Syndrome coronavirus (MERSCoV). Batista in [17] predicted the final infection numbers of COVID-19 in China. The Logistic Growth model and classic Susceptible-Infected-Recovered (SIR) dynamic model were used with data from Worldmeters website. The model predicted that the final estimation of coronavirus epidemic will be approximately 83,700 cases. In [18] , a mathematical model was developed to predict the effects of implementing government restrictions to contain COVID-19 epidemic on the number of infection cases in China. The model showed that the number of infection cases decreased if high restrictions are taken earlier instead of later. When the novel COVID-19 started to spread in China in the first half of January 2020, many cases went unreported. In [19] , a model was generated to estimate the real number of unreported cases with the help of existing information from the Serial Intervals (SI) of infection caused by the two previous coronaviruses (SARS and MERS). The model results showed that the unreported cases from 1 to 15 January 2020 were approximately 469 cases. In addition, they found that the cases increased by 21-fold after 17 January 2020. Moreover, in [20] , they proposed a statistical model to estimate the rate of COVID-19 cases in China. In this model, they used the data of the evacuated Japanese citizens from Wuhan from 29 to 31 January 2020. The model estimated the infection rate to be 9.5, and the death rate to be from 0.3 to 0.6. The Japanese citizens totaled 565, and this number is insufficient to estimate an accurate rate. In [21] , the risk of transmission of COVID-19 was estimated. They proposed a model based on clinical information of the disease and confirmed cases of individuals. The estimated result of the reproduction number was higher than 6.47. In addition, the model predicted the confirmed cases in seven days (23 to 29 January 2020). Thompson in [22] developed a mathematical model to estimate the sustained human-to-human transmission. The data of 47 patients were used, and the estimated result showed that the transmission rate is 0.4. Moreover, the transmission is only 0.012 in case the symptoms have not yet manifested in half of the tested data. In [23] , they proposed a model to estimate the COVID-19 death risk based on the data of 20 cases reported by 24 January 2020. Two different scenarios were estimated, and the results are 5.1 and 8.4. Moreover, the estimation of the reproduction for both scenarios are 2.1 and 3.2. The results indicated that the COVID-19 epidemic could become a pandemic. We collected the daily number of confirmed, recovered, and deaths COVID-19 cases released by Saudi Ministry of Health's Twitter account from 2 March 2020 to 15 May 2020 to construct a real-time database. The data were organized in a matrix with the rows representing the date and columns representing the number of the new confirmed cases, the number of accumulated cases, the number of accumulated recovered cases and the number of accumulated deaths cases as shown in Tables 1 and 2 . We generated short-term forecasts in real-time using two models namely, the Logistic Growth and SIR models. The phenomenological Logistic Growth model has been widely used to model population growth with limited resources and space. The model was originally developed by Haberman in [24] and have been used to predict 2015 Ebola epidemic [11, 12] . The dynamics of the epidemic, typically expressed as a cumulative number of cases, can use the similar model when the primary method of control is quarantine-as in the case of a novel viral infection such as COVID- 19. In the Logistic Growth model, the epidemic can be defined by the differential equation where C is the cumulative cases at time t, r is the early growth rate, and K is the final epidemic size. For comparison, we also simulate the well-known SIR model to represent the spreading process of COVID-19 epidemic in Saudi Arabia. SIR model framework is an epidemic spreading model inspired by the seminal work of Kermack and McKendric [25] . In epidemiology, SIR model is belong to compartmental epidemic models. The basic in compartmental epidemic model is proposed by Hamer in 1906 where he suggested that the infection spread should depend on the number of susceptible population and the number of infected population [26] . We estimate the parameters of model to get a best fit on reported data of COVID-19 outbreak in Saudi Arabia. In SIR model, we assume that the modeling timescale is short, no vital dynamics (births and deaths), and the host population size (N) is constant. In SIR-type models, individuals are classified into three separate groups (or compartments) based on their infectious status: • Susceptible (S): group of individuals that not currently infected but may catch the disease. The SIR model is represented by the following system of nonlinear Ordinary Differential Equations (ODEs) [27] : where t is time (in day), β is the contact rate, gamma is the remove rate or the inverse of infectious period, S(t) is the number of susceptible population at time t, I(t) is the number of infected population at time t, and R(t) is the number of recovered population at time t (see Figure 2 ). In the SIR model, one key parameter to understand the basic epidemiological characteristics of the epidemic is the basic reproduction number (R 0 ). R 0 is the average number of secondary persons in a complete susceptible population infected by a single infected person during its spreading life. It indicates how contagious is the infectious diseases. The true value of R 0 is uncertain until the outbreak is over. R 0 depends on three factors: Duration of infectiousness; • Probability of infection being transmitted during contact between an infected person and a susceptible person; • The average rate of contact between infected and susceptible individuals. R 0 is represented as when R 0 > 1 virus is currently spreading in the population and when R 0 < 1 virus is stop spreading due to run out of susceptible and the decrease of new cases. We used MATLAB to simulate the Logistic Growth and SIR model based on [17, 28] models. In the epidemic simulation graphs, regions color separate epidemic into three phases: The simulation is data-driven which is rely on the historical time-series data. From the simulations, it is shown that the Logistic Growth prediction is more optimistic compare to the other models. From the Logistic Growth model prediction, the peak of the infection rate is 7 May 2020 (see Figure 3 ). The transition to steady-state phase starts on 28 May 2020 and the ending phase starts on 14 June 2020. The Logistic Growth model predicts that final number of case is around 69,000 cases. Several assumptions were taken in the simulation of SIR model: constant total population, uniform mixing of the people, and equally likely recovery of infected. The SIR model of COVID-19 epidemic simulation in Saudi Arabia are shown in Figures 5 and 6 . In SIR-model the parameters β and γ are estimated from the actual number of confirmed cases. The variable R 0 changes with respect to time. It will change every day based on the number of cases confirmed. From the SIR-model prediction, the peak of the infection rate is 1 May 2020. The transition to steady-state phase starts on 2 June 2020 and the ending phase starts on 24 June 2020. The SIR-model predict that final number of case is around 79,000 cases. Predicting the epidemic evolution based on limited data and with no past epidemiological data is not trivial task. We present predictions for reported cases of COVID-19 in Saudi Arabia from 2 March to 15 May 2020 using mathematical modeling and simulation. We used two models: Logistic Growth and SIR models. Across both predictions, Logistic Growth and SIR-model provide different results (Figures 3 and 5) . Both models are similar in predicting the epidemic trends but with a slightly different timing, the SIR model predicts about a few days late than the Logistic Growth. Both models also have a gap in predicting the final number of cases with SIR model has a higher number of cases compared to the Logistic Growth. In conclusion, while our models predict the COVID-19 outbreak in Saudi Arabia still in fast growth phase, our predictions need to be interpreted with caution given the dynamic case definition and reporting patterns. Without mass testing, the confirmed case number might be only a subset of the true total infected cases. Also, the asymptomatic infected individuals who are not tested and then recovered do not get counted. Under-reporting and asymptomatic people are observed in many countries worldwide and may lead to under-estimation of the accumulated cases. Therefore, mass testing is needed to identify patients and to contain the spread of the disease. Our prediction based on current data suggests that the epidemic continue to spreading in Saudi Arabia. It is suggested that warmer weather may contribute to slowing down the spread of coronavirus but this would need further investigation when more data is available. It should be noted that the MERS coronavirus has spread in Saudi Arabia in the summer (August) [29] . The authors declare no conflict of interest. Emerging coronaviruses: Genome structure, replication, and pathogenesis Isolation and characterization of a bat SARS-like coronavirus that uses the ACE2 receptor Novel Coronavirus Clinical features of patients infected with 2019 novel coronavirus in Risk for Transportation of 2019 Novel Coronavirus (COVID-19) from Wuhan to Cities in China Nowcasting and forecasting the potential domestic and international spread of the 2019-nCoV outbreak originating in Wuhan, China: A modelling study COVID-19 Coronavirus Pandemic. Available online Forecasting the 2001 foot-and-mouth disease epidemic in the UK Simulating the SARS outbreak in Beijing with limited data Is West Africa approaching a catastrophic phase or is the 2014 Ebola epidemic slowing down? Different models yield different answers for Liberia Using phenomenological models for forecasting the Optimization Method for Forecasting Confirmed Cases of COVID-19 in China Trend and forecasting of the COVID-19 outbreak in China Real-time forecasts of the COVID-19 epidemic in China from Early estimation of the case fatality rate of COVID-19 in mainland China: A data-driven analysis Estimation of the final size of the COVID-19 epidemic Predicting the cumulative number of cases for the COVID-19 epidemic in China from early data Estimating the unreported number of novel coronavirus (2019-nCoV) cases in China in the first half of January 2020: A data-driven Modelling analysis of the early outbreak The rate of underascertainment of novel coronavirus (2019-nCoV) infection: Estimation using Japanese passengers data on evacuation flights Estimation of the transmission risk of the 2019-nCoV and its implication for public health interventions Novel coronavirus outbreak in Wuhan, China, 2020: Intense surveillance Is vital for preventing sustained transmission in new locations Real-time estimation of the risk of death from novel coronavirus (COVID-19) infection: Inference using exported cases Mathematical Models: Mechanical Vibrations, Population Dynamics, and Traffic Flow A contribution to the mathematical theory of epidemics Epidemic Disease in England: The Evidence of Variability and of Persistency of Type The mathematics of infectious diseases Estimation of the final size of the second phase of the coronavirus epidemic by the logistic model Will heat kill the coronavirus?