id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
27298	Anonymous	Marvel Carbureter and Heat Control As Used on Series 691 Nash Sixes Booklet S			.txt	text/plain	3556	341	82	the set screw holding this elbow in the air intake of carbureter, after carbureter heat jacket entering the valve-body in the lower portion The main-exhaust-heat-valve "C" is connected by means of a lever and long connecting rod to the throttle lever of the carbureter so that when The purpose of the carbureter heat jacket and valve in exhaust line with feature of same is accomplished by setting the Main-Exhaust-Heat-Valve By referring to the cut shown (See Page 5) and noting "Heat Setting No. 1," it will be noted that valve "C" in main exhaust line is fully closed Next, set air screw for good idle by either turning to the right a the needle so set and the engine warmed up, the adjustment of the air The best adjustment is obtained with the fuel and air valves set as carbureter, exhaust damper body assembly necessary for same, and the hot	./cache/27298.txt	./txt/27298.txt