id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
39033	Low, David Allan	An Introduction to Machine Drawing and Design			.txt	text/plain	27226	2731	88	views of the _double riveted lap joint_ shown in fig. times full size the sections of screw threads as shown in fig. EXERCISE 12.--Draw, full size, the views shown in fig. square nut and bolt with countersunk head shown in fig. bolt for a marine shaft coupling shown in fig. The cast-iron flange coupling is shown in fig. EXERCISE 24: _Cast-iron Flange Coupling._--Draw the views shown in 24 of a cast-iron flange coupling, for a shaft 4-1/2 inches in EXERCISE 26: _Pillow Block for a Four-inch Shaft._--Draw the views EXERCISE 29: _Shaft Hanger._--Draw the two elevations shown in is secured as shown by an iron pin 5/16 inch diameter. EXERCISE 43: _Marine Connecting Rod._--Draw all the views shown in EXERCISE 44: _Coupling Rod End._--Draw first the side elevation and An example of a steam-engine cross-head is shown in fig. sectional elevation of the piston, &c., shown in fig.	./cache/39033.txt	./txt/39033.txt