id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
39225	Rose, Joshua	Modern Machine-Shop Practice, Volumes I and II			.txt	text/plain	854595	49441	82	the step within the work holds the tooth to its cut, as shown in Fig. 330, in which N represents a nut and T the tap, both in section. diameter of work conical or taper instead of parallel is shown in Fig. 498: P and P' are square-headed screws threaded into the walls of A and each tool shall carry its cut along the work, is shown in Fig. 711. In roughing out coarse threads, a single-pointed tool, formed as in Fig. 998, and set considerably above the centre as shown, may be used to or table whereon to rest the work and hold it fair is shown in Fig. 1067, the taper shank fitting in the dead centre hole and the tailstock Under ordinary conditions that in the form of tool shown in Fig. 1113[15] is best for brass work, the face A being horizontal or slightly	./cache/39225.txt	./txt/39225.txt