key: cord-0001126-psguw47w authors: Feng, Jianyu; Guo, Hong; Li, Sen; Lu, Tun title: A Study of the Mechanism of the Chaperone-like Function of an scFv of Human Creatine Kinase by Computer Simulation date: 2013-04-24 journal: PLoS One DOI: 10.1371/journal.pone.0062147 sha: a0e91efcafa0a743be0342254943e8d31cd36558 doc_id: 1126 cord_uid: psguw47w A new application of antibodies is to use them as macromolecular chaperones. Protein antigens usually have multiple epitopes, thus, there may be a plurality of antibodies binding to one antigen. However, not all antibodies that bind to one antigen could act as a chaperone. Experiments show that some screened anti-human creatine kinase single chain antibodies (scFV) could assist in the folding and stabilizing of the enzyme, while others could not. We built the model of the single chain antibody (scFv-A4) that increased the stability of human creatine kinase (HCK) by the homology modeling method. Epitopes of human creatine kinase were predicted by computer and then the binding of scFv-A4 and HCK was modeled with computer. The calculation results were further combined with the peptide array membrane experiment results to obtain reliable models for the scFv-A4-HCK complex. Based on the above study we gave an explanation about how scFv-A4 could act as a macromolecular chaperone assisting the folding of HCK. This study provides an approach for predicting antigen-antibody binding mode and also a useful theoretical guidance for the study of antibodies' chaperone-like function. In recent years, a number of human diseases, such as Alzheimer's, Huntington's, Parkinson's, and Creutzfeldt-Jakob's diseases, were reported to be related to the misfolding and aggregation of proteins [1, 2] . Molecular chaperones are a kind of protein that are capable of assisting nascent peptides in correctly folding to functional proteins by binding to the folding intermediate to avoid kinetic traps, suppressing aggregation of the substrate [3, 4] . Traditional molecular chaperones could be classified according to their molecular weights and sequences to families such as HSP90, HSP70, HSP60 and nucleoplasmin. They have low specificity and react with many kinds of proteins. The low specificity of conventional molecular chaperones enables them to help many house-keeping proteins simultaneously. But a protein-misfolding disease might be caused by only one specie of protein which carries point mutants while most other housekeeping proteins are normal [5] . Thus the use of traditional molecular chaperones as therapeutic molecules for misfolding diseases may have problems such as low efficiency and undesired side-effects. A new field in development is to design or screen specific macromolecules which could be used as chaperones for target proteins, inhibiting their misfolding or coagulation to cure the related protein-misfolding diseases [6] [7] [8] . Antibodies are the most common macromolecules that can bind specifically to target proteins. Previous researches had shown that some antibodies could excert a chaperone-like function on their antigens [9] . Therefore antibodies with a chaperone-like function were considered as the therapeutic drug candidates for protein misfolding diseases because they only affect mutant proteins, leaving normal proteins intact. In addition, antibodies with a chaperone-like function were helpful research tools for protein folding researches. Human creatine kinase (HCK) is a protein of important physiological function, which is closely related to intracellular energy operation, muscle contraction and ATP regeneration [10] . According to existing researches in the folding of HCK, the dysfunction of HCK could be a highly possible pathogenic factor of many serious diseases [11, 12] . Our previous studies [13] indicate that HCK expressed in E. coli existed as inclusion bodies. Antibodies produced by using HCK expressed by E. coli as antigen could be used to study the renaturation of inclusion bodies, such as capturing the intermediates during the folding process of HCK to study the structural characteristics of the intermediates. An scFv is a fragment of a conventional antibody which is constructed by connecting the variable domains of the antibody heavy chain and the light chain by a segment of linker peptide. ScFvs with high affinity and specificity to their antigens had been isolated from phage display libraries by many groups [14] [15] [16] [17] . Schlattner [18] have successfully isolated several scFv clones from a human antibody phage display library that recognize cytosolic BB-CK. In our previous work [13] several scFvs had been screened out from a phage library using recombinational HCK as antigen. Only one of the scFvs named scFv-A4 has a significant chaperonelike function, preventing the aggregational precipitation of HCK during its folding and accelerating its recovery to nature conformation. In order to comprehend the unique chaperone property of scFv-A4, the binding between scFv-A4 and HCK must be analyzed. The top priority would be identifying the portion of HCK bound by scFv-A4. Molecular docking by computer has been widely used in the study of the binding mechanism of protein-protein or proteinligand systems, including themes such as protein-folding mechanism [19, 20] , protein-protein surface modification [21, 22] , improving the binding between proteins and polypeptides or small molecules [23] [24] [25] . The number of degrees of freedom of protein-protein interactions was so large that no docking program nowadays can search the conformational space thoroughly even at the classical mechanics level of theory. Therefore, no current software is able to correctly dock two proteins ab initio. One approach to reduce the search space for protein-protein interactions is to predict protein-protein interaction sites first and then use the orientational docking method to test the possibility of the binding. This is the approach used in this work. As to antigen-antibody binding, the parts of the antibodies bound to antigens were defined as CDR regions (complementarity determining regions) which could be identified by sequence analysis, while the interaction sites on the antigens were called the epitopes. Many bioinformatics software tools had been developed to predict epitopes. B-cell epitopes typically belong to one of the two classes: linear (continuous) epitopes or conformational (discontinuous) epitopes. At present the prediction methods for linear epitopes had been extensively studied and the prediction accuracy had been improved to be as high as 73.37% [26] . Thus linear epitopes prediction programs could be used to predict the potential binding sites of HCK. One technique recently developed to screen potential linear epitopes was the peptide array membrane technique [27] . Peptide fragments covering the whole sequence of a protein antigen were synthesized and spotted on the membrane, the membrane was then treated with antibodies. After washing away the unbound antibodies and labeling the bound antibodies with secondary chromogenic antibodies, the peptide segments of potential epitopes could be identified. Such identified peptides were only potential epitopes because when they were fixed on the membrane their conformation might not be the same as when they were parts of a protein. But we expected more reliable results could be deduced by combining the two methods. After the potential interaction sites of both interacting proteins had been identified, molecule docking software packages were used to generate 3D models for the scFv-antigen complexes. The quality of the 3D complex models can be used to verify the validity of the previous prediction based on 1D sequence. The chaperone-like function of the antibody was explained by investigating their interactions. The steps of this research were summarized as below. First, the three-dimensional structure of scFv-A4 was constructed by the homology modeling method. Then potential epitopes of HCK were predicted by software tools and the peptide array membrane experiment. The 3D models of scFv-A4-HCK complex were built by orientational docking. Finally, we analyzed the interaction between HCK and scFv-A4 and speculated the mechanism underlying the chaperone-like function of the scFv-A4. This research also provided a new approach for studying antibodyantigen interactions based on the peptide array membrane experiment and bioinformatics software tools. The CDRs and the linker of scFv-A4 were inferred from the alignment as shown in Figure 1 . The model of the antibody was constructed by the Modeller 9v7 program as shown in Figure 2a . The distributions of W-Y dihedral angles of the backbone were checked by the Procheck program [28] . A Ramachandran map was used to describe the dihedral angles of the low-energy conformation ( Figure 2b ). It showed that 87.4% of the residues fell into the best area, 12.1% of the residues into the other license area, 0.5% of the residues into the permitted area, 0.0% of the residues into the not allowed area. Therefore, dihedral angles of the structure of the model were reasonable. For 87.65% residues the 3D-1D compatibility score is greater than 0.2 by Verify-3D [29] (A high score indicated the compatibility of the sequence and the tertiary structure is good). The amino acids with scores less than 0.2 were GLY112-LYS142 which belonged to the linker segment ( Figure 2c ). Since no template was used for modeling the linker the poorer model result of this area was expected. The above evaluations verified that the three-dimensional model of scFv-A4 was reasonable. The peptide array membrane was shown in Figure 3 . Each square contained a 12 mer peptide. First set of peptides covered HCK sequence was spotted in squares A1 to M9. Peptides at the spots N9 to T5 were the peptides picked from first set in which first amino acid sequence numbers were odd number; this just served as a repeat experiment. After secondary antibodies and chromogenic substrates were added, six sets of continuous spots were developed. Each set of the continuous spots corresponds to a peptide segment of HCK. Spots A2-A6 correspond to Asn5-Tyr14 of HCK; Spots of E3-E13 correspond to Ser129-Lys138 of HCK; Spots of F17-F21 correspond to Lys170-Met179 of HCK; Spots of I3-I12 correspond to Glu248-Leu257 of HCK; Spots of I22-I29 correspond to Lys265-Asn274 of HCK; Spots of K5-K14 correspond to Thr313-Thr322 of HCK. These six peptides were potential scFv-A4 binding sites on HCK. There were 11 linear epitopes predicted by ElliPro [30] and 15 linear epitopes predicted by FBCpred [26] . These predicted epitopes were potential binding sites for all antibodies. For example, some predicted peptides might be the epitopes for anti-HCK antibodies with no chaperone-like functions. There were a total of eight overlapping epitopes in the two groups of epitopes predicted by both methods. These eight epitopes were shown in Table 1 . For these eight peptides, four peptides fell in the Nterminal domain, one peptide fell in the linker area and three fell in the C-terminal domain. Comparing to the peptide array membrane experiment results, there were two overlapping sequences, LYS170-MET179 and LYS265-ASN274, which were positive in both methods. An orientational docking of scFv-A4 and HCK epitopes was carried out by ZDOCK [31] docking server. If we combined the results from peptide array membrane experiment and bioinformatics predictions, we could reduce the workload by only docking the two overlapping peptides. For experimental completeness, we did the orientational docking for all of the six peptides screened out by the peptide array experiment. ZDOCK did not generate any reasonable models for four of the six peptides (SER129-LYS138, GLU248-LEU257, THR313-THR322, ASN5-TYR14). It was interesting because it agreed with the bioinformatics prediction that they were not epitopes. To look into the details of the six peptides, we investigated their structure feature. As shown in Figure 4 , the first three peptides were embedded inside the HCK monomers, thus they were not accessible by scFv-A4. For peptide ASN5-TYR14, it was buried between the dimerization interfaces of the two HCK monomers therefore it was also inaccessible for scFv-A4. Only the rest two peptides (LYS170-MET179 and LYS265-ASN274 could be docked to scFv-A4 by ZDOCK Server and two complex models were obtained. Because ZDOCK used rigid body approximation, to obtain a more accurate protein complex structure, complex models generated by ZDOCK were redocked by RosettaDock [32] . which implemented the flexible docking method and came with a more accurate scoring function. RosettaDock generated 1000 new complex models for each of the two epitopes respectively. The output results were ranked by docking scores. We discarded models in which the binding sites of the antibody were outside the CDR regions and picked the best complex models by the best rank scores. Two final complex models for the two epitopes were named as complex-I and complex-II respectively and shown in Figure 5 . Antibodies and their functional derivatives such as scFv and Fab are known for their specific binding and have already been used in protein folding researches [9] . Antibodies with a chaperone-like function had the potential to be used as therapeutic agents for misfolding diseases. More researches need to be done to elucidate the mechanism of antibodies' chaperone-like function. A protein antigen usually carries more than one epitope, therefore an antigen can interact with several different types of antibodies. Obviously the different types of antibodies have different impacts on the antigen's properties. We had previously screened out several scFvs for HCK and one of them named scFv-A4 showed strong chaperone-like activity. To elucidate why scFv-A4 had the chaperone-like function, we combined computer modeling and peptide array membrane technique to study the interactions between scFv-A4 and HCK. Firstly, bioinformatics software tools were used to predict the interacting sites between scFv-A4 and HCK and then the results were combined with the peptide array membrane experiment results to build the 3D models of the binding complex. The prediction of protein-protein interactions by computer is still a challenging subject, and it is inappropriate to rely entirely on the energy scoring function to filter the results directly. Thus, we used the orientational docking method followed by redocking, the cumulated results were then sorted by the scoring function to get reliable protein-protein binding models. First the binding sites of the antigen and the antibody were predicted respectively. After that the two proteins were orientationally docked according to the predicted binding sites. Sequence based epitope prediction was still difficult especially for the conformational epitopes. We combined the prediction results of two different software tools, and only those epitopes reported by both methods were considered as potential epitopes. The accuracy of each method was 73% (FBCPred) and 84% (Ellipro) respectively, so the accuracy of the prediction of the two methods combined could reach 95%. The number of predicted epitopes was further reduced by comparing them with the peptide array membrane experiment results. The epitopes we studied were linear epitopes, and for linear peptide epitopes, the binding solely depends on amino acid sequences. If an antibody could bind to a linear peptide epitope, it will bind to the peptide irrespective of whether the peptide was on the protein, on the folding intermediate or on the membrane. Consequently only the epitopes which were positive in peptide array membrane experiment were selected for further modeling. Two antigenantibody model complexes were screened out as the final result. There are two major entry points for scFv-A4 to exert its chaperone-like function on HCK, on the HCK folding intermediate or on the folded HCK. Yan et al found that the C-terminal domain of HCK was more likely to be the binding site during rabbit muscle CK (RMCK) aggregation [33] and the linker played a crucial role in RMCK folding [34, 35] . After further investigate, they found that the linker act as a lid to protect the hydrophobic side chains of PHE250 and VAL347 against exposure to solvent [36] . In complex model-I, scFv-A4 bound to the opposite site of HCK thus has not impact on these residues (Figure 5a ). In complex model-II, the binding position of scFV-A4 was close to the two hydrophobic residues and actually formed a bulky protrusion (Figure 5b) , therefore for complex model-II, scFv-A4 bound to HCK would hinder the aggregation of HCK by steric effects.Webb [37] found that the C-terminal portion of the chick CK (GLY215 to LYS380) was much more resistant to digestion than the N-terminal portion (PRO1 to GLY133), and the middle of the HCK sequence (ARG134 to ARG214) was most sensitive to proteolysis. They proposed that the folding intermediate consisted of a folded C-terminal domain and a partially folded N-terminal domain separated by an unfolded central linker. Gross et al.'s studies suggested that the C-terminal fragment (168-380) of mitochondrial CK represented an autonomous folding unit, and that the folding of the C-terminal domain might precede the conformational stabilization of the N-terminal moiety in vivo [38] . The binding site of complex model-I was located between these two terminal domains, which indicated that in complex model-I, scFv-A4 would not significantly interfere with the major folding path ways of the two domains. It may stabilize the folded C-terminal domain and assist in the folding of the Nterminal domain. There was a V8 endoproteinase sensitive fragment in the chick CK intermediate. When the chick CK had been resurrected, this fragment resisted to the proteinase, since it became less exposed in the folded kinase [39] . Therefore, this fragment can be regarded as a characteristic part of the creatine kinase intermediate. This fragment identified by V8 endoproteinase was IFKKAG [37] , the corresponding sequence of HCK was ILE263-GLY268. It is interesting that in complex model-II, scFv-A4 also bound to this segment which indicated that scFv-A4 could bind with the intermediate and participate in HCK folding or resurrecting process. To summarize, in complex model-II scFv-A4 can exhibit a chaperone-like function either by hindering the aggregation by the steric effects or by assisting the folding of HCK and stabilizing the folded conformation. In complex model-I, scFv-A4 exhibits chaperone-like function by assisting the folding of HCK and stabilizing the whole structure. In this study we combined computer modeling and the peptide array membrane method to investigate the interaction between scFv-A4 and HCK. The mechanisms underlying scFv-A4's chaperone-like function were discussed. The traditional method of studying antigen-antibody interactions is by constructing many antigen mutants and observing the changes of the binding activity. The whole process is tedious and time consuming. Epitopescanning by Peptide array membrane method has been made cheap and fast nowadays, our work demonstrated that the combination of the peptide array membrane technique with bioinfomatics methods could be a more efficient approach for epitope mapping. For the two complex models we proposed, further study can be done to verify the models by engineering point mutants on the predicted epitopes of HCK and investigating the change of the system's behaviors. Homology modeling in our study was done in the following three steps: (1) Speculating the linker, the light and the heavy chain segments of the antibody. The sequence of scFv-A4 was used to do a BLAST search in the Non-redundant protein sequences database of NCBI. A scFv sequence (ID: ACZ28696.1) [40] which had the highest score and the lowest E value was picked out to be used as reference. The sequences of ACZ28696.1 and scFv-A4 were aligned by Clustalx1.81 [41] and each area of the scFv-A4 sequence was appointed by comparing the sequence with ACZ28696.1. (2) Homology modeling templates preparation. Since linker peptides of the single chain antibody were often absent in the PDB database [42] , the sequence of the linker peptide would be excluded when aligned with the template antibody. The sequence of scFv-A4 without linker was used to search the PDB database. The light chain and the heavy chain were processed separately. We obtained a template (2DD8 [43] ) with a higher identity which was a Fab antibody fragment. The sequence identity of the light chain of the Fab was 100%, while that of the heavy chain was 93%. Both chains of the Fab were used as templates for building the 3D model of scFv-A4 by Modeller 9v7 [44] . (3) Optimization of the model. Since the linker was modeled without an appropriate template, optimization work was focused on the linker. The DOPE-based loop modeling protocol [44] was used to optimize the linker structure. The CDRs are the major region of the antibodies that bind to antigens. Since the CDRs of the scFv ACZ28696.1 was known, the CDRs of scFv-A4 was inferred from the alignment result of the two sequences ( Figure 1 ). The resulted CDR assignment was checked to be complied with the Kabat numbering rules [45] . The crystal structure of HCK was available in PDB file 1I0E [46] . HCK is a dimmer in nature but the 1I0E only contains a Each peptide epitope was noted by its sequence region on HCK. There were total eight epitopes predicted by both software and their overlapping region was listed at the right column. doi:10.1371/journal.pone.0062147.t001 Figure 4 . Positions of the peptides screened out by the peptide array membrane method on the HCK 3D structure. The six experimental positive peptides were colored in salmon and represented by using the stick model. As shown in the picture, ASN5-TYR14 is at the position of dimerization interface of the two monomers; SER129-LYS138 is completely embedded inside the structure; GLU248-LEU257 is in a dent of the surface; LYS265-ASN274 which contains V8 endoproteinase fragment was also in a dent of the structure; LYS170-MET179 is located at the bottom of the structure; THR313-THR322 is located in the largest groove of the structure. doi:10.1371/journal.pone.0062147.g004 monomer and the structure of two peptide fragments, MET1-HIS7 and GLY323-GLY331, was missing. Thus we use another CK structure, the 1U6R for rabbit CK in PDB as the homology modeling template. The sequence identity between rabbit CK and HCK is 96% and the 1U6R file contains the structure of the two missing fragments peptides of the 1I0E file. We used FBCPred [26] based on the machine learning method and ElliPro [30] based on the 3D structure for epitope prediction. An epitope predicted by both methods would be regarded as a potential epitope. As for FBCPred, default parameters were adopted for linear epitope prediction, the length of the linear epitopes was set to 14, and the specificity was 75% as default. No parameter was needed for ElliPro. 12 mer peptides from the HCK sequence were synthesized on nitrocellulose membrane as individual spots. Peptide sequences were started from HCK N-terminal and each subsequent peptides shift one position to the right. A set of such peptides completely sampled the whole HCK sequence and formed an array on the membrane. The peptide array membrane was incubated with purified scFv-A4 antibodies in the MP buffer (30 mM Tris-HCl, pH 7.6, 170 mM NaCl, 6.4 mM KCl, 0.05% Tween 20, 5% sucrose) overnight at 4uC with gentle shaking. Unbound antibodies were removed with TBS (4uC) andthe antibodies bound were electro-transferred onto a PVDF membrane using a semi-dry blotter (0.8 mA/cm2, three hours). The membrane was blocked with 5% non-fat dry milk for 2 h and incubated with the primary antibody (anti-V5 antibody) overnight at 4uC. After being washed with TBS buffer for three times, the membrane was incubated with the alkaline phosphatase-conjugated secondary antibodies for 1 hour and developed using the enhanced chemiluminescence method. The ZODCK Server was used to dock scFv-A4 to HCK. The ZDOCK Server allowed user to pick contact and blocking residues of the proteins for docking. The HCK residues of the predicted epitopes were chosen as contact residues for docking. There were six linear peptides exhibiting positive reactivity with scFv-A4 in the peptide array membrane experiment and the corresponding portions of HCK were designated as the orientational docking sites of HCK. No blocking residues of HCK were selected during docking, but for scFv-A4, residues of the linker segment were selected as the blocking residues. RosettaDock was used to optimize the models build by ZDOCK because it implemented the flexible docking method and had a scoring function of better performance. The perturbation docking method of the Rosetta-Dock program was applied and the three default perturbation parameters were used. One thousand models were produced for each selected ZDOCK model complex. Conceived and designed the experiments: JYF TL. Performed the experiments: HG SL. Analyzed the data: JYF TL. Contributed reagents/ materials/analysis tools: SL. Wrote the paper: JYF TL. Figure 5 . The scFv-A4-HCK complexes. Model I is shown at left. Model II is shown at right.ScFv-A4 is colored in marine. HCK is shown as dimmer. One HCK monomer is colored in lime. The N-terminal of the other HCK monomer is colored in slate and C-terminal in cyan, the linker is colored in orange. The V8 endoproteinase sensitive fragment is colored in magentas. The binding residues are represented by using the stick model. The PHE250, VAL347 are represented using the sphere model. doi:10.1371/journal.pone.0062147.g005 Chaperone-like Function of an scFv PLOS ONE | www.plosone.org Protein aggregation in disease: a role for folding intermediates forming specific multimeric interactions Targeting misfolded proteins to fight neurodegenerative diseases Molecular chaperones: proteins essential for the biogenesis of some macromolecular structures Molecular chaperones: assisting assembly in addition to folding Effects of the single point genetic mutation D54G on muscle creatine kinase activity, structure and stability Autoantibodies against chaperonin CCT in human sera with rheumatic autoimmune diseases: comparison with antibodies against other Hsp60 family proteins Heat shock protein 90: the cancer chaperone. Heat Shock Proteins in Cancer Therapeutic approaches to protein-misfolding diseases Antibodies as specific chaperones Delayed-onset muscle soreness does not reflect the magnitude of eccentric exercise-induced muscle damage. Scandinavian journal of medicine The Creatine Kinase/Creatine Connection to Alzheimer's Disease: CK Inactivation, APP-CK Complexes and Focal Creatine Deposits Mitochondrial creatine kinase in human health and disease A scFv antibody against human muscle creatine kinase as fully functional chaperone The selection of intracellular antibodies Design and use of a phage display library The use of phage display for the development of tumour targeting agents Isolation of high affinity human antibodies directly from large synthetic repertoires Isoenzyme-directed selection and characterization of anti-creatine kinase single chain Fv antibodies from a human phage display library Design, structure and stability of a hyperthermophilic protein variant Refolding the engrailed homeodomain: Structural basis for the accumulation of a folding intermediate Automated design of specificity in molecular recognition Computational Design of a New Hydrogen Bond Network and at Least a 300-fold Specificity Switch at a Protein-Protein Interface Computational design of second-site suppressor mutations at protein-protein interfaces Computational design of affinity and specificity at protein-protein interfaces Hsp90/ Cdc37 Chaperone/co-chaperone complex, a novel junction anticancer target elucidated by the mode of action of herbal drug Withaferin A Predicting flexible length linear B-cell epitopes Peptide microarrays for the characterization of antigenic regions of human chromogranin A AQUA and PROCHECK-NMR: programs for checking the quality of protein structures solved by NMR A method to identify protein sequences that fold into a known three-dimensional structure ElliPro: a new structure-based tool for the prediction of antibody epitopes ZDOCK: An initial-stage protein docking algorithm Protein-protein docking with simultaneous optimization of rigid-body displacement and side-chain conformations Conformational change in the Cterminal domain is responsible for the initiation of creatine kinase thermal aggregation Role of the linker between the N-and C-terminal domains in the stability and folding of rabbit muscle creatine kinase Mutation of the conserved Asp122 in the linker impedes creatine kinase reactivation and refolding Chaperone-Like Effect of the Linker on the Isolated C-Terminal Domain of Rabbit Muscle Creatine Kinase Protease digestion studies of an equilibrium intermediate in the unfolding of creatine kinase The tryptophan residues of mitochondrial creatine kinase: Roles of Trp-223, Trp-206, and Trp-264 in active-site and quaternary structure formation Monoclonal antibody studies suggest a catalytic site at the interface between domains in creatine kinase Neutralizing antibodies of botulinum neurotoxin serotype A screened from a fully synthetic human antibody phage display library Multiple sequence alignment using ClustalW and ClustalX The protein data bank Structure of severe acute respiratory syndrome coronavirus receptor-binding domain complexed with neutralizing antibody Comparative protein structure modeling using Modeller Sequences of proteins of immunological interest: US Dept. of Health and Human Services Structure of human muscle creatine kinase