key: cord-0001856-w70or31z authors: Chen, Wenhong; Yan, Yurong; Zhang, Ye; Zhang, Xuemei; Yin, Yibing; Ding, Shijia title: DNA transducer-triggered signal switch for visual colorimetric bioanalysis date: 2015-06-10 journal: Sci Rep DOI: 10.1038/srep11190 sha: 90403742f692b74ea175eef945ff8560a1a6c2b5 doc_id: 1856 cord_uid: w70or31z A simple and versatile colorimetric biosensor has been developed for sensitive and specific detection of a wide range of biomolecules, such as oligonucleotides and aptamer-recognized targets. Combining the signal transducer and catalyzed hairpin assembly (CHA)-based signal amplification, the target DNA binds with the hairpin DNA to form a new nucleic acid sequence and creates a toehold in the transducer for initiating the recycle amplification reaction of CHA. The catalyzed assembly process produces a large amount of G-rich DNA. In the presence of hemin, the G-rich DNA forms G-quadruplex/hemin complex and mimic horseradish peroxidase activity, which catalyzes a colorimetric reaction. Under optimal conditions, the calibration curve of synthetic target DNA has good linearity from 50 pM to 200 nM with a detection limit of 32 pM. This strategy has been successfully applied to detect S. pneumoniae as low as 156 CFU mL(−1), and shows a good specificity against closely related streptococci and major pathogenic bacteria. In addition, the developed method enables successful visual analysis of S. pneumoniae in clinical samples by the naked eye. Importantly, this method demonstrates excellent assay versatility for sensitively detecting oligonucleotides or aptamer-recognized targets. Streptococcus pneumoniae, one of the most common bacterial respiratory pathogens worldwide, causes several infectious diseases including community acquired pneumonia, otitis media, meningitis and septicemia 1,2 . In the developing world, pneumococcal pneumonia leads to 25% of all preventable deaths in children under 5 years old and over 1.2 million infant deaths every year 3, 4 . Unfortunately, the reported incidence rates for laboratory confirmed invasive pneumococcal disease underestimate the true burden, as only a small portion of presumptive cases can be confirmed by conventional techniques. Numerous analytical methods have been developed for detection of S. pneumoniae. Conventional culture method is reliable, but time-consuming, and it sometimes compromises by spontaneous autolysis or antibiotic treatment. In addition, direct pneumococcal antigen detection, including ELISA and a rapid immunochromatographic test (Binax NOW S. pneumoniae urinary antigen test), has a poor sensitivity and specificity. Moreover, urine antigen-based testing can be positive for weeks after the onset of infection 5, 6 . Polymerase chain reaction (PCR) frequently applied is independent of bacterium viability and has distinct advantage in sensitivity 7 . But PCR wide application has been limited by its false positivity and the low resolution of post-PCR analysis by gel electrophoresis 8 . Real-time quantitative PCR can provide a higher sensitivity 9 . However, it requires sophisticated, expensive equipments and highly trained analysts in a well maintained laboratory 10 . Compared with these methods, colorimetric sensors have recently attracted special attention owing to their extreme simplicity and the visual detection in homogeneous solution without any immobilization, separation and washing steps. In this study, colorimetric detection is based on repetitive guanine rich sequence motifs, which can form G-quadruplex/ hemin complex (DNAzyme) in the presence of hemin. DNAzyme, having the mimic horseradish peroxidase activity 9,11,12 , possesses higher thermal stability that can be denatured and renatured for many cycles without losing catalytic activities. Thus, DNAzyme can catalyze the conversion of a colorless 2, 2′ -azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS 2− ) to a green ABTS −13 . Signal amplification is of importance for molecular detection. To date, a variety of amplification strategies have been applied to further enhance the sensitivity. Most of them need the participation of enzyme 14, 15 , label 16 , or materials 17, 18 , with the drawbacks including specific reaction conditions, exorbitant price, poor stability, complicated operation and so on. Recently, catalytic hairpin assembly, developed from DNA nanostructure organization, has been received particular interest. CHA relies only on hybridization and strand-exchange reactions to achieve signal amplification circuit [19] [20] [21] , which overcomes the weaknesses of enzymatic amplification and the utilization of materials 22, 23 . However, CHA currently has the disadvantage of requiring complicated engineering for adaptation to various analytes 24 . Redesigning the entire circuit each time is unnecessarily arduous for the clinical analytical applications. Aim to develop a versatile colorimetric biosensor by reusing the circuit's module to detect various inputs through the use of a transducer. In this study, a novel colorimetric sensing strategy by combining the signal transducer and CHA is developed for detecting the part of lytA gene of S. pneumoniae 25, 26 and the whole cell of Salmonella Typhimurium 27 . The method reveals a great potential to adapt CHA to support even more robust analytical applications, and construct a label-free, enzyme-free, visual, simple, rapid, sensitive and specific platform for the development of low-cost and point-of-care diagnostics. It may be a potential and powerful tool for clinical diagnostics in the future. Design of the proposed method. The principle of the proposed method is illustrated in Fig. 1 was designed based on our previous research works 28 . The two hairpins (H1 and H2) do not initially interact with each other but can catalytically form a duplex in the presence of unstructured domain b and c. The unstructured domain e and f of H1 are able to form G-quadruplex. When domain e is hidden in the stem of H1, the G-quadruplex cannot be formed at this time. In the presence of target, the loop can hybridize with the target, forming a rigid duplex and disrupting the stem formed by domain b*and b. The liberated b and c further open H1, leading to the formation of toehold for strand displacement by H2. Then H2 hybridizes with the unfolded H1 and releases the complex of T0 and H0 (T0-H0) into next circulation. As a result, the generated abundant G-quadruplex structures are proportional to targets. The G-quadruplex structure can strongly bind with hemin to form the DNAzyme, displaying peroxidase-like activity, catalyzing oxidation of ABTS 2− to ABTS − . To validate whether the detectable signal really derived from the target or not, the comparative experiments were performed to prove feasibility of the proposed method. After incubation with hemin for 40 min, the absorbance of different mixtures was recorded. As shown in Fig. 2A , the system containing H1 exhibited very weak characteristic absorption peak at 418 nm ( Fig. 2A , curve a). Compared with curve a, there was almost no change in the mixture of H1 and H2 ( Fig. 2A, curve b) . Upon the addition of H0 to the H1, H2 system, a slight increase in absorption peak was detected ( Fig. 2A, curve c) . The results demonstrated that H0 can trigger weak interaction of H1 and H2 to form a small amount of self-assembly product, resulting in background signal. When the mixture of 500 pM T0, H0 and H1 was incubated together, the absorbance increased slightly ( Fig. 2A , curve d), indicating that T0 can trigger the self-assembly of H0 and H1, forming a certain amount of G-quadruplex structures. But in the presence of T0 and H2 ( Fig. 2A , curve e), the amplified signal was about 282% of that without H2 ( Fig. 2A, curve d) . Such significant signal enhancement clearly indicates that the cycling amplification strategy can be executed with the aid of hairpin H2. The insets of Fig. 2A show the corresponding photographs of the colorimetric responses. We also used native polyacrylamide gel electrophoresis (PAGE) to characterize the reaction process (Fig. 2B) . The base number of H0 (lane 1), H1 (lane 2) and H2 (lane 3) derived from PAGE were in accordance with our design. Significantly, the mixture of H0 and H1 did not cause their self-hybridization reaction (lane 4), neither did the mixture of H1 and H2 (lane 5). T0 hybridized with the partial H0 (lane 6). When we mixed the H0, H1 and H2, there was a barely visual band (lane 7) above H0, H1 and H2, which was H1-H2 complex. Expectedly, adding T0 to the H0 solution followed by incubation with H1 and H2, the H1-H2 band (lane 8) became much brighter compared with H1-H2 of lane 7. Optimization of the reaction conditions. To achieve the optimal analytical performance, different reaction conditions were optimized. First, the effect of concentration of hairpin H0 and H1 were investigated respectively. High concentration of hairpin structures can increase the self-assembly, but correspondingly increase the noise owing to the potential hybridization of hairpins. To avoid the signal increase induced by nonspecific background amplification, the signal-to-noise ratio is used to evaluate the sensitivity of the assay. The maximum value of signal-to-noise ratio was achieved at the H0 concentration of 100 nM (Fig. 3A) . The concentration of H1 was also critical parameter affecting the analytical performance. As showed in Fig. 3B , 125 nM H1 was chosen for the subsequent experiments according to the maximum signal-to-noise ratio. Time dependence of the T0-H0 catalyzed hairpin assembly was also investigated. As shown in Fig. 3C , in the absence of target T0, only very weak signal increase was observed (in red). In the presence of target T0 (in black), with the increase of the incubated time, the signal synchronously ascended. The continuously increasing signal also indicated that the T0-H0 catalyzed hairpin assembly was indeed taking place. Beyond the incubation time of 20 min, the absorbance intensity reached a stable value. Therefore, 20 min was selected as the optimal incubation time for CHA. Finally, the incubating temperature was examined from 4 to 55 °C (Fig. 3D) . At 37 °C, the signal-to-noise ratio reached the top, so 37 °C was selected as the appropriate temperature. Analytical performance of colorimetric biosensor. Under the optimal experimental conditions, the UV− vis absorption increase with the increasing concentration of target T0. As shown in Fig. 4A , the absorbance intensity enhanced successively with the increasing concentration of target DNA. As expected, the inset showed the color variation of the reaction solution for the increasing amounts of T0, a series of noticeable color change could be visualized from light to deep (inset of Fig. 4A ). By analyzing the absorbance with the concentrations of T0 (Fig. 4B) , the linear curve of the absorbance intensity (Y) vs the logarithm of the T0 concentration (C) was fitted to a regression equation of Y = 0.1471 lg (C/pM) -0.1498 (R 2 = 0.9994) in the range of 50 pM-200 nM. The detection limit was calculated to be 32 pM according to the responses of the blank tests plus 3 times the standard deviation. The relative standard deviations (RSD) of the intra-assay and inter-assay precisions were 3.6% and 5.9%, respectively. These results demonstrate that the developed colorimetric assay has good precision and acceptable reproducibility. To evaluate the reliability and practicability of the proposed method, the detection of the PCR products using the developed method was carried out by culturing S. pneumoniae at the concentrations from 0 to 2.4 × 10 7 CFU mL −1 . After a pretreatment step for the samples, PCR was performed using target lytA gene extracted from each concentration of S. pneumoniae, and PCR products were verified by agarose gel electrophoresis (Fig. 4C) . There was no target band of PCR products for S. pneumoniae less than 2.4 × 10 5 CFU mL −1 owing to the low resolution of gel electrophoresis 29 . Meanwhile, the denatured PCR products were also detected using the developed colorimetric biosensor. As shown in Fig. 4D , a good linear dependence on absorbance intensity with logarithm of the S. pneumoniae concentration was achieved in the range from 10 2 to 10 7 CFU mL −1 . The calibration curve can be expressed as Y = 0.1126 lg(C/pM) -0.1659 (R 2 = 0.9926), and the detection limit was calculated to be 156 CFU mL −1 (n = 3), which is much lower than previous reported methods (Supplementary Table S1 ). The relative standard deviations (RSD) of the intra-assay and inter-assay precisions were 4.5% and 6.2%, respectively, demonstrating potential promise in clinical application. Specificity. The specificity of the method was further investigated by exposing hairpins to a series of artificial targets sequences, including perfect complementary target DNA T0, single-base mismatched DNA (T1), two-bases mismatched DNA (T2), and non-complementary DNA (NT) at the same concentration (1 nM). As shown in Fig. 5A , the absorbance for one-base mismatched DNA and two bases mismatched DNA was only about 25.8% and 4.0% of that for perfect target, respectively. The non-complementary target DNA showed almost the same response as the blank solution, indicating high specificity and great potential for single nucleotide polymorphism analysis. This may be attributed to the relatively long stem region of the hairpin structure with thermodynamic stability. In addition, the specificity of the developed method was further explored using other streptococci and major pathogenic bacteria presented in clinical samples. As shown in Fig. 5B , S. pneumoniae and other bacteria at two different concentration levels (10 7 (11), Enterococcus faecalis (12) , Klebsiella pneumoniae (13) , E.coli (14) , Pseudomonas aeruginosa (15) , and blank (16) . Inset: Agarose gel electrophoresis of different bacterial PCR products. The error bars were standard deviations of three repetitive measurements. Scientific RepoRts | 5:11190 | DOi: 10.1038/srep11190 cerebrospinal fluid samples using and bacterial culture method, indicating the feasibility and acceptable accuracy of proposed method for detection of S. pneumoniae in complex clinical samples. In addition, the assaying values of the proposed method were slightly larger than bacterial culture plating count. These results may be attributed to detected DNA from dead bacteria. In the future research, a large number of clinical samples will be applied to further verify the developed method. Universality. In principle, non-nucleic acid can also be employed as inputs. Previous studies 24, 30 have shown that the aptamer can be used in conjugation with catalyzed hairpin assembly for the detection of non-nucleic-acid analytes. Therefore, based on the developed colorimetric strategy, Salmonella Typhimurium has been successfully detected using transducer with the similar circuit's module. The principle of detecting Salmonella Typhimurium is illustrated in Fig. 6A . We design an aptamer beacon in which an anti-Salmonella Typhimurium aptamer 27 , Apt, is inhibited by a complementary strand, Inh. Apt contains the toehold (domain b and c) for initiating the amplification reaction, and Inh can block the catalyst region. When Apt is bound with Inh, it can neither bind Salmonella Typhimurium nor catalyze the hybridization of H1 and H2. In contrast, free Apt can do both. As a result, when the Salmonella Typhimurium binds to and stabilizes Apt, it shifts the equilibrium so that the duplex with Inh is destabilized and the single-stranded toehold is available to activate the amplification reaction. As shown in Fig. 6B , the cultured three Salmonella Typhimurium were inoculated into PBS with different concentrations from 0 to 8 × 10 7 CFU mL −1 (with 1:4 dilution), respectively. Upon addition of Salmonella Typhimurium with increasing concentration, the intensity of absorbance increased successively. The RSD of the intra-assay and inter-assay precisions were 5.0% and 7.6%, respectively. The results indicate that the developed method possesses the potential as a pragmatic tool for Salmonella Typhimurium direct detection in real samples. Furthermore, the amplification strategy can be used for detection different targets by means of changing the corresponding complementary target DNA or aptamer strands, demonstrating versatile and potential colorimetric sensing platform. In summary, this work proposes a DNA nanotechnology-triggered signal switch and combines the transducer with CHA recycling amplification to develop a highly sensitive and selective strategy for homogeneous visual colorimetric bioanalysis. This strategy has been successfully used for detection of oligonucleotide and Salmonella Typhimurium. It can conveniently be extended to a wide range of analytes with available affinity ligands. This developed method shows excellent analytical performance with satisfactory versatility for different analytes. In addition, the proposed strategy possesses good reproducibility and acceptable accuracy for clinical practical sample analysis, and provides a label-free, enzyme-free, low-cost, visual, simple, rapid, sensitive and specific platform for clinical diagnostics. The experiments were performed in 100 μ L of solution containing 50 μ L of H0 (400 nM) and 50 μ L of target DNA solution of different concentrations. The mixture was first incubated in TNaK buffer for 30 min at 37 °C to allow the hairpin structure to be opened. After that, 50 μ L of H1 (500 nM) and 50 μ L of H2 (400 nM) was added the above mixture to give the final concentrations of 125 nM and 100 nM, respectively. And further incubation in TNaK buffer for 20 min at 37 °C. Subsequently, 3 μ M of hemin was introduced to the resulted solution and incubated for 40 min at room temperature. Finally, 200 uL of ABTS 2− (4 mM) and 1 μ L of 30% H 2 O 2 were added to the mixture and mixed completely. The mixture was added into square quartz cuvettes, and the absorption spectra were collected from 500 to 400 nm on a UV-vis spectrophotometer (UV-2550, Shimadzu, Kyoto, Japan). The rate of the peroxidase-mimicking reaction was monitored at 418 nm. All measurements were conducted at room temperature. The role of Streptococcus pneumoniae virulence factors in host respiratory colonization and disease Streptococcus pneumoniae protein vaccine candidates: properties, activities and animal studies Bacteremia among children admitted to a rural hospital in Kenya Pneumococcal vaccination in developing countries Interpreting Assays for the Detection of Streptococcus pneumoniae Diagnosis of Pneumococcal Pneumonia: Current Pitfalls and the Way Forward Accuracy of using the lytA gene to distinguish Streptococcus pneumoniae from related species Colorimetric detection of PCR products of DNA from pathogenic bacterial targets based on a simultaneously amplified DNAzyme Improvement of pneumococcal pneumonia diagnostics by the use of rt-PCR on plasma and respiratory samples. Scand Acoustic detection of DNA conformation in genetic assays combined with Chemiluminescence imaging for a protein assay via proximity-dependent DNAzyme formation Multiple types of logic gates based on a single G-quadruplex DNA strand Isothermal cycling and cascade signal amplification strategy for ultrasensitive colorimetric detection of nucleic acids Label-free fluorescence detection of DNA methylation and methyltransferase activity based on restriction endonuclease Hpa II and exonuclease III Flow screen-printed amperometric detection of p-nitrophenol in alkaline phosphatase-based assays Fabricating a reversible and regenerable electrochemical biosensor for quantitative detection of antibody by using "triplex-stem" DNA molecular switch A flrorecence method for detection of DNA and DNA methylation based on grapheme oxide and restriction endonuclease Hpa II Disposable amperometric magnetoimmunosensors for the specific detection of Streptococcus pneumoniae Programming biomolecular self-assembly pathways Target-triggered enzyme-free amplification strategy for sensitive detection of microRNA in tumor cells and tissues Probing spatial organization of DNA strands using enzyme-free hairpin assembly circuits Real-time detection of isothermal amplification reactions with thermostable catalytic hairpin assembly Design and application of cotranscriptional non-enzymatic RNA circuits and signal transducers Rational, modular adaptation of enzyme-free DNA circuits to multiple detection methods Evaluation of Several Biochemical and Molecular Techniques for Identification of Streptococcus pneumoniae and Streptococcus pseudopneumoniae and Their Detection in Respiratory Samples Real-Time Assay as A Tool for Detecting lytA Gene in Streptococcus pneumoniae Isolates Application of Aptamer Based Biosensors for Detection of Pathogenic Microorganisms A simple electrochemical biosensor for highly sensitive and specific detection of microRNA based on mismatched catalytic hairpin assembly Combination of functionalized nanoparticles and polymerase chain reaction-based method for SARS-CoV gene detection Small molecule-triggered assembly of DNA nanoarchitectures S.D. coordinated the overall research. W.C., Y.Y. and S.D. developed concept and designed research; W.C. and Y.Z. performed research and collected data; W.C., Y.Z., X.Z. and Y.Y. analyzed data; and W.C., Y.Z. and S.D. wrote the paper. All authors discussed the results and implications and commented on the manuscript at all stages. All authors reviewed the manuscript.