key: cord-0002793-sq5iod1w
authors: Attia, Mohamed I.; Eldehna, Wagdy M.; Afifi, Samar A.; Keeton, Adam B.; Piazza, Gary A.; Abdel-Aziz, Hatem A.
title: New hydrazonoindolin-2-ones: Synthesis, exploration of the possible anti-proliferative mechanism of action and encapsulation into PLGA microspheres
date: 2017-07-25
journal: PLoS One
DOI: 10.1371/journal.pone.0181241
sha: c1903895a3fc53a43a81d310f7567181bdee782f
doc_id: 2793
cord_uid: sq5iod1w

The synthesis and molecular characterization of new isatin-based hydrazonoindolin-2-ones 4a-o and 7a-e are reported. The in vitro anti-proliferative potential of the synthesized compounds 4a-o and 7a-e was examined against HT-29 (colon), ZR-75 (breast) and A549 (lung) human cancer cell lines. Compounds 7b, 7d and 7e were the most active congeners against the tested human cancer cell lines with average IC(50) values of 4.77, 3.39 and 2.37 μM, respectively, as compared with the reference isatin-based drug, sunitinib, which exhibited an average IC(50) value of 8.11 μM. Compound 7e was selected for further pharmacological evaluation in order to gain insight into its possible mechanism of action. It increased caspase 3/7 activity by 2.4- and 1.85-fold between 4 and 8 h of treatment, respectively, at 10 μM and it caused a decrease in the percentage of cells in the G1 phase of the cell cycle with a corresponding increase in the S-phase. In addition, compound 7e increased phosphorylated tyrosine (p-Tyr) levels nearly two-fold with an apparent IC(50) value of 3.8 μM. The 7e-loaded PLGA microspheres were prepared using a modified emulsion-solvent diffusion method. The average encapsulation efficiency of the 7e-loaded PLGA microspheres was 85% ± 1.3. While, the in vitro release profile of the 7e-loaded microspheres was characterized by slow and continuous release of compound 7e during 21 days and the release curve was fitted to zero order kinetics. Incorporation of 7e into PLGA microspheres improved its in vitro anti-proliferative activity toward the human cancer cell line A549 after 120 h incubation period with an IC(50) value less than 0.8 μM.

a1111111111 a1111111111 a1111111111 a1111111111 a1111111111

Cancer is one of the most formidable health burdens with increasing annual frequency worldwide [1] . In spite of precluding many of its causative risk factors, cancer still gives rise to about 550,000 deaths in the world every year and is the second leading cause of death next to heart disease [2] . The currently available cancer therapies usually suffer from poor selectivity between normal and invaded cells, with serious side effects and the development of drug resistance [3] . Therefore, the continued search to identify novel antitumor compounds bestowed with low toxicity and minimum side effects remains critically important.

The 1H-Indole-2,3-dione (isatin) moiety constitutes the backbone of a number of agrochemicals, dyes and bioactive molecules, owing to its appropriate size and unique electronic properties [4] [5] [6] [7] . Various 3-substituted isatins have been utilized as anticancer drugs or drug surrogates. Example of this class of isatin derivatives is sunitinib (1, SU11248, Sutent TM , Pfizer, Inc., Fig 1) which was clinically approved in 2006 and is used now as the standard first-line treatment for the management of gastrointestinal stromal cancers and renal cell carcinoma due to its multi-targeting tyrosine kinase inhibiting activity [8] . Nintedanib (2, Fig 1) is another potential anticancer agent of this class that possesses triple angiokinase inhibiting activity toward vascular endothelial growth factor receptors (VEGFRs),platelet-derived growth factor receptors(PDGFRs) and fibroblast growth factor receptors (FGFRs) [9] . Semaxanib (3, Fig 1) was developed as a new anticancer candidate with multiple tyrosinekinase receptor inhibitor activity with GI 50 values of less than 10 nM against 46 out of 53 NCI cell lines, but it has been discontinued in clinical trials owing to its dangerous side effects [10, 11] .

Schiff bases of isatin are acknowledged to have a broad spectrum of biological activities including anticonvulsant [12] , antibacterial [13] , antifungal [14] , anti-HIV [15] , antiviral [16] and anticancer activity [17] [18] [19] .

Indirubin (4, Fig 2) is a bis-isatin isomer of the widely used colorant indigo (5, Fig 2) , and it is the active ingredient of a traditional Chinese remedy (Danggui Longhui Wan) that is used for the treatment of chronic myelogenous leukemia (CML) [20] . Moreover, indirubin (4) inhibits both glycogen synthase kinase 3 beta (GSK-3β) and cyclin-dependent kinases (CDKs) via binding to the ATP pocket with IC 50 values of 0.190 and 0.075 mM, respectively [21, 22] . Azaindirubin (6, Fig 2) was developed to overcome the poor water solubility and hence low bioavailability of indirubin (4) and it showed anti-proliferative activity toward ovarian adenoma cell lines [23] . In the same vein, the symmetric bis-isatin derivative (7, Fig 2) displayed in vitro anti-proliferative activity against the HepG2 cell line with IC 50 value about 4.23 mM [21] .

Microsphere carrier systems made from the naturally occurring biodegradable polymers have attracted considerable attention for several years in the field of sustained drug delivery. These carrier systems can precisely control the release rates and target drugs to a specific body site with an enormous impact in formulation and development of novel drug delivery systems [24] . Biodegradable polyesters such as copolymers of lactic and glycolic acid (PLGA) are attractive biomaterials for the encapsulation of pharmaceuticals and bioactive compounds. In this case, encapsulated drugs are not as readily available to biological systems as when they are in solution because the release of the drug will occur only after the onset of polymeric degradation [25] .

In this context, certain potential functionalized Schiff bases of isatin 4a-o were designed and synthesized to evaluate their in vitro anti-proliferative activity against a panel of human cancer cell lines. In addition, the non-symmetric bis-isatins 7a-e were also prepared and evaluated as new anti-proliferative agents. The compound exhibiting the best pharmacological activity was subjected to deeper pharmacological investigations in order to gain insight into its 4f [27] , 4i [28] and 6a, b [29] have been previously reported. The microspheres were prepared with poly (D, L-lactide co-glycolide) PLGA (50:50, mol. wt 30,000-60,000), which was purchased from Sigma-Aldrich (St. Louis, USA). The emulsifier, low molecular weight polyvinyl alcohol (PVA) was obtained from Alfa Aesar (Karlsruhe, Germany). Dichloromethane (DCM) was purchased from Avonchem (United Kingdom). Dimethyl sulfoxide (DMSO) was obtained from Loba Chemie (Mumbai, India). All ingredients used were of analytical grade. All cell lines have been purchased from the American Type Culture Collection (ATCC). 11 .01 (s, 1H, NH indolic ); 13 General procedure for the synthesis of target indolin-2-ones7a-e. A mixture of intermediates 6a, b (1 mmol) and the appropriate 3-hydrazonoindolin-2-one2a-d (1 mmol) in ethyl alcohol and catalytic amount of glacial acetic acid was heated under reflux for six hours, filtered while hot and the precipitate was washed with ethanol. The solid product was collected and re-crystallized from an ethanol/DMF mixture (3:1) to furnish compounds 7a-e with 67-79% yield. 

The detailed experimental procedures for pharmacological evaluation of the synthesized compounds were provided as supplementary materials.

Preparation of 7e -loaded PLGA microspheres. PLGA microspheres were prepared by a modified emulsion-solvent diffusion method as described previously [32] . Briefly, the DCM (3 mL) phase containing PLGA was poured into the DMSO (4 mL) phase containing compound 7e to obtain a 7e-polymer ratio of 1:10. The resulting organic phase was added dropwise with the help of a syringe into an aqueous phase (25 mL) containing 1% (w/v) PVA using magnetic stirrer at 300 rpm and then homogenized at 13,500 rpm at room temperature for 3 min. The resulting emulsion was then transferred into water (25 mL) at room temperature and stirred at 200 rpm with a magnetic stirrer overnight until the solvent was evaporated. The resulting PLGA microspheres were recovered by centrifugation at 15000 rpm using a 3-30 K centrifuge (Sigma, Germany) for 15 min at 4˚C, washed three times with distilled water (50 mL) to remove the residual PVA, re-suspended in distilled water (15 mL) and then lyophilized in a Telstar freeze-dryer (Terrassa, Spain) at -50˚C with a pressure below 1 mbar for 24 h. Plain microspheres were prepared in a similar manner except for the absence of compound 7e in the DMSO phase.

Microsphere characterization. Microsphere yield: The percentage yield of microspheres was calculated using the weight in mg of the final product after drying by lyophilization with respect to the initial total weight in mg of the drug and the polymer used for the preparation in the emulsifying process according to Eq (1) [32, 33] . The equation below shows the percentage yield calculation.

Encapsulation efficiency and compound 7eloading: 10 mg of quantitatively weighed microspheres were dissolved in DMSO (2 mL) and then sonicated for 15 min, then 0.1N HCl (5 mL) was added to precipitate the polymer. The solution was centrifuged at 10,000 rpm for 10 min. then the supernatant was diluted appropriately and analyzed for the content of 7e spectrophotometrically (Biochrom Libra S22, UK) at λ max of 318 nm to determine the 7e content. The polymer did not interfere with the absorbance of7e at the specified wavelength. Theoretical 7eloading was determined by the entire 7e present in the polymer solution in the microspheres. The 7e-loading and entrapment efficiency were determined by formulas (2) and (3), respectively.

All of the measurements were conducted in triplicate.

Determination of the particle size of microspheres: Particle size of the prepared microspheres was measured using a dynamic light scattering particle size analyzer, model Zetasizer Nano-ZS, ZEN 3500, Malvern Instruments (Worcestershire, UK) at 25.0 ± 0.1˚C [34, 35] . Lyophilized microspheres (1 mg) were re-suspended in distilled water (100 mL) and the particle size was recorded in triplicate.

To investigate the morphological characterization of the prepared microspheres, they were mounted onto a double-sided adhesive tape attaching to an aluminum stub, then coated with gold and examined by scanning electron microscope (SEM, JEOL JSM-7001F, Japan) at 20 kV acceleration voltage with a secondary detector. The magnification was adjusted until a clear image of the surface of the microspheres appeared and the picture was then recorded [36] .

In vitro7e-release: Studies on the in vitro release of 7e from microspheres were carried out using the vial method as reported by Dubey et al. [34] . Compound 7e-PLGA-microspheres containing 5 mg equivalent of compound 7e were suspended in a vial containing phosphate buffer (10 mL, pH 7.4) with 0.3% Tween 80 to improve the solubility of 7e. The vial was incubated in a water bath at 37 ± 0.5˚C and vibrated horizontally at speed of 100 rpm. In vitro 7e release was assessed by intermittently sampling the vial (2 mL) at predetermined time intervals (1, 2, 3, 4, 5, 6, 10, 12, 15, 18, 20 and 21 days), then replacing the volume with 2 mL of fresh phosphate buffer.

Cell viability assay: The cell viability assay was performed as described in the section of antiproliferative activity in the supplementary materials.

The synthetic strategy adopted for the preparation of the target derivatives is depicted in S3 and S4 Files. Indoline-2,3-diones 1a-c were refluxed with 99% hydrazine hydrate in methanol to obtain the corresponding hydrazone derivatives 2a-c.The reaction of hydrazones 2a-c with different substituted benzaldehydes 3a-e in ethanol in the presence of a catalytic amount of glacial acetic acid furnished the target derivatives 4a-o with 67-83% yields (S3 File).

The IR spectra of compounds 4a-o displayed absorption bands around 3400 cm -1 for the indolic NH group in addition to the absorption bands of carbonyl groups near 1720 cm -1 which is consistent with the previously reported ones for compounds 4a [26] and 4f [27] . Also, their 1 H NMR spectra revealed a D 2 O-exchangeable signals in the region δ 10.84-11.01 ppm attributable to the NH protons of the indolin-2-one moieties, in addition to the signal of the methine protons (-CH = N-) in the region δ 8.55-8.70 ppm which is in accordance with those previously reported for compounds 4a [26] , 4f [27] and 4i [28] . Moreover, the 13 C NMR spectra of compounds 4a-o showed signals resonating around δ 163 ppm, characteristic of C = O carbons.

Direct methylation and benzylation of indoline-2,3-dione 1a with dimethyl sulfate and benzyl bromide were carried out in the presence of sodium hydroxide or potassium carbonate to furnish intermediates 6a and 6b, respectively. The second group of the target indolin-2-ones 7a-e was obtained in good yields (67-79%) through the reaction of the two intermediates 6a and 6b with the appropriate 3-hydrazonoindolin-2-one 2a-d in refluxing ethyl alcohol using catalytic amount of glacial acetic acid (S4 File).

The IR spectra of the target compounds 7a-e revealed the presence of the characteristic absorption bands due to the NH and carbonyl groups of indolin-2-one moieties. Moreover, the 1 H NMR spectra of 7a-e revealed the presence of the singlet indolic NH protons at a δ 11.02-11.15 ppm. Also, the signals of the aliphatic protons (N-CH 3 ) of compounds 7a, b were observed as singlet signals around δ 3.22 ppm, while the benzylic protons (-CH 2 ) of 7c-e appeared as singlet signals close to δ 5.01 ppm.

Anti-proliferative activity. Twenty compounds, i.e. 4a-o and 7a-e, were analyzed for cancer cell growth inhibitory activity. These studies were carried out using cells derived from human lung, colon and breast tumors (A549, HT-29 and ZR-75 cells, respectively). This initial assessment of activity tested each compound in quadruplicate at a single concentration of 30 μM, if solubility permitted.

As indicated in Table 1 , the test compounds 4a-j, 4l-n and 7a-e exhibited anti-proliferative activity against A549, HT-29 and ZR-75 cells with an average growth inhibition in the range from 3.5 to 97.7%, whereas compounds 4k and 4o stimulated the growth of the tested cell lines.

Compounds 7b, 7d and 7e were the most active compounds, showing an average growth inhibition from 95.4 to 97.7%. Therefore, they were subjected to quantitative inhibitory concentration 50% (IC 50 ) determination for their cell growth inhibitory activity towards the A549, HT-29 and ZR-75 cancer cell lines. The results are presented in Table 2 and Fig 3. Extra sum-of- Compound 7e exhibited the best average IC 50 value (2.37 μM), being nearly three-fold more potent than the positive control, sunitinib (average IC 50 value = 8.11 μM). Therefore, compound 7e was subjected to deeper pharmacological investigations in order to obtain insight into its pharmacological profile.

Apoptosis and caspase 3/7 activity. Compound 7e was analyzed for apoptosis inducing activity in cancer cells. These studies were carried out using cells derived from human lung (A549). This follow-up assessment of activity tested compounds in quadruplicate at concentrations equivalent to the IC 50 value to inhibit growth and a concentration three-fold above the IC 50 concentrations over a time course ranging from 2 to 48 h. As indicated in Fig 4, compound 7e at 10 μM increased caspase activity by 2.4-and 1.85-fold between 4 and 8 h of treatment, respectively, while the lower tested concentration had no effect on caspase 3/7 activity.

Cell cycle effects. Compound 7e was analyzed for effects on various aspects of cell cycle progression in human cancer cells. These studies were carried out using cells derived from lung adenocarcinoma (A549). This follow-up assessment of activity tested compounds used immunofluorescent imaging of phosphorylated Rb protein and the total DNA content of each cell to determine the cell cycle phase. The ability of the test compounds to affect the cell cycle and Rb phosphorylation was tested over a range of concentrations from less than 100 nM to 50 μM.

As indicated in Fig 5, compound 7e had dose-dependent effects on the tested parameters. It caused a significant reduction in the total cell number after 24 h of treatment with an IC 50 value = 2.67 μM and with an IC 50 value = 2.36 μM after 48 h (Table 3) , reflective of the dosedependent growth inhibition observed in the homogenous assay.

In addition, compound 7e caused a decrease in the percentage of cells in the G1 phase of the cell cycle with a corresponding increase in the S-phase. This suggests that part of the compound effects on growth may be attributable to a decreased rate of progression through the cell Synthesis and anticancer activity of certain hydrazonoindolin-2-ones cycle and corresponding decreases in proliferation, similar to the positive control, sunitinib. Arrest in G2 may represent a checkpoint blockade, whereas mitotic arrest may, in some cases, lead to mitotic catastrophe and subsequent programmed death of cells with multiple or aberrant nuclei. The increase in S-phase cells without a concomitant G2/M phase fraction may indicate a very rapid onset of apoptosis in the case of compound 7e.

As with other cell cycle parameters, levels of phosphorylated Rb protein were substantially reduced in a dose-dependent manner by the control and the test compound 7e. After 24 h of treatment, the IC 50 value was lower than the IC 50 value for reductions in the cell number caused by the test compound 7e (Table 3 ). This may support the hypothesis that the inhibition of cyclin dependent kinases by isatin compounds plays a role in their growth inhibitory activity. However, the correlation was less apparent at the 48 h time point.

Furthermore, compound 7e was analyzed for its effect on total cellular levels of phosphorylated tyrosine (p-Tyr) residues in human cancer cells. These studies were carried out using cells derived from lung adenocarcinoma (A549) and immunofluorescent imaging. The ability of the test compound 7e to affect acute serum stimulation of tyrosine phosphorylation was tested over a range of concentrations from less than 100 nM to 50 μM. Compound 7e increased p-Tyr levels nearly two-fold with an apparent IC 50 value of 3.8 μM, which is consistent with the growth inhibitory IC 50 value of this compound. In contrast, the positive control compound sunitinib caused a modest dose-dependent decrease in the level of cellular tyrosine phosphorylation activity with an IC 50 value of 0.9 μM, well below its growth inhibitory IC 50 value (Fig 6) . Synthesis and anticancer activity of certain hydrazonoindolin-2-ones Selectivity. As an indicator of selectivity for tumor cells, compound 7e was analyzed for cell growth inhibitory activity in three non-tumorigenic cell lines.IEC-6 cells derived from rat intestine exhibit morphologic and karyotypic features of normal intestinal epithelial cells [37] . Cultures derived from human fibrocystic mammary tissue (MCF-10A) are non-tumorigenic and exhibit features of primary cultures of breast tissue, including dome formation [38] .Fibroblasts derived from embryonic tissue from mice (Swiss 3t3 fibroblasts) are both non-tumorigenic and contact inhibited [39] .For comparison, the A549 human non-small cell lung cancer (NSCLC) cell line was included. This assessment of the growth inhibitory activity of the compounds was tested in quadruplicate at a maximum concentration of 25 μM, followed by 10 serially diluted concentrations.

As indicated in Fig 7 and Table 4 , compound 7e inhibited growth in both normal and tumor cell lines >50%. Compound 7e displayed a selectivity value of 1.7 while the positive control sunitinib showed a selectivity value of 1.4 (the difference between the mean IC 50 in non-tumor cell lines versus the NSCLC cells).

Multidrug resistant lung cancer cell line. Compound 7e was analyzed for cancer cell growth inhibitory activity in a sensitive NSCLC cell line (A549) and a multidrug resistant lung cancer cell line (NCI-H69AR) which expresses the ABCC1 efflux pump protein. This assessment of activity tested compounds in quadruplicate at a maximum concentration of 25 μM, followed by 10 serially diluted concentrations.

As indicated in Fig 8 and Table 5 , compound 7e inhibited growth in sensitive A549 and resistant NCI-H69AR cell lines with IC 50 values of1.6 and 12.7μM, respectively. The resistant NCI-H69AR cell line was nearly eight-fold less sensitive, indicating that this compound may be subjected to efflux by ABCC1. The positive control sunitinib showed a lesser degree of resistance, i.e. the resistant NCI-H69AR cell line was 1.9-fold less sensitive.

Encapsulation efficiency and 7e loading capacity. The prepared microspheres had high yield of 82% w/w recovery with respect to the initial amounts of polymer and 7e used in the microsphere formulation. The average encapsulated efficiency of 7e in PLGA microspheres was 85% ± 1.3 using a 1:10 7e:polymer ratio. The high encapsulation efficiency may be due to the presence of a high amount of the polymer, which can reduce 7e loss during the fabrication process. The percentage 7e-loading capacity was 9.84 ± 0.15.

Fourier transform infrared spectroscopic (FT-IR) analysis. The FT-IR spectra of pure 7e, PLGA, their physical mixture, plain microspheres and 7e-loaded microspheres were obtained to verify the chemical interaction between 7e and the polymer. The functional group bands of 7e remained the same in the spectra of both pure 7e as well as in the physical mixture and the formulation. This indicated that no interaction took place between 7e and the polymer. In the FT-IR spectrum of 7e-loaded microspheres, it was found that there was no significant spectral shift or disappearance of the bands of 7ein any spectrum of 7e with the polymer, as shown in Fig 9, indicating compatibility between 7e and the PLGA polymer.

Particle size determination. The particle size of drug-loaded microspheres is considered an important characteristic as it could affect drug release properties. The particle size determination revealed that the produced microspheres were uniform with a size range of 1-3μm. The small polydispersity index (PdI) suggested that the size distribution of the particles was fairly monomodal (Fig 10) . The loading of 7edidnot alter the particle size, as the average particle size of the plain microspheres and the loaded microspheres was 2.26±0.2 and 2.287±0.17 μm, respectively (mean ± SD, n = 3). Fig 10 shows the particle size distribution of the 7e-loaded microspheres around 3 μm. A narrow particle size distribution is an important aspect in passive targeting of microspheres as well as for stability issues. The results demonstrate that the particle size of the prepared microspheres was uniform. Morphological analysis of 7e-loaded microspheres. Scanning electron microscope (SEM) images revealed that the microspheres were intact spheres showing the formation of spherical and smooth surface microspheres with almost no pores or cavities, which may prolong the release of the encapsulated 7e over an extended period of time. No crystals of 7e were detected, and there was no clogging or deformation and few fragments of polymer adhering, as shown in Fig 11. No difference was observed in the morphological properties of microspheres due to the presence of compound 7e. The particle size observed by SEM was consistent with that obtained from the Zetasizer particle size analyzer. These results indicate the efficiency of the preparation method and optimization of the preparation parameters such as the concentration and viscosity of the polymer solution. The obtained results are consistent with the previously reported studies for different drugs [40] [41] [42] .

Drug release evaluation. Drug release from biodegradable polymeric particles occurs through a combination of several mechanisms. Generally, it occurs through desorption of surface-bound drug, diffusion of the drug through the polymeric matrix and erosion of the polymer particles. In vitro 7e release was assessed in phosphate buffer (pH 7.4) containing a surfactant to simulate the physiological milieu and maintain sink conditions. Samples were incubated at 37˚C, and the amount of 7e was determined using a UV spectrophotometer. Fig 12 shows the release profile of raw 7e powder and the prepared 7e-PLGA microspheres. Linear prolonged 7e release rates from the microspheres were observed for 21 days without an initial burst release (Fig 12) . On the other hand, the release of compound 7e from the raw powder was faster than its release from the microspheres, as 65% of 7e was released after 5 days. This uncontrolled burst release of compound 7e from raw powder could result in too high local concentration which could lead to severe local tissue injure and hamper appropriate delivery to the target.

It can be seen that 7e-loaded microspheres exhibited biphasic drug release kinetics [34, 43] with an initial release up to 6% after 48 h and 27% after six days followed by cumulative release of 90% after 20 days. No initial burst release was observed, suggesting low 7e density at the surface of the microspheres and hence the homogenous distribution of 7e within the microspheres. The high polymer concentration led to the formation of a dense polymer matrix structure in the microspheres and no pores as observed in the SEM images, which resulted in a significant decrease in the initial burst release from the microspheres. The kinetics of 7e release from microspheres was close to the zero order model. The correlation coefficient (r 2 ) was 0.9884 and the release curve was fitted to zero order kinetics. This release pattern was due to diffusion and degradation of the microspheres. Fig 12 shows the initial slow release of 7e from microspheres, which could be attributed to the hydrophobicity of 7e. Moreover, the interaction of the hydrophobic 7e molecule with the polymer matrix via hydrophobic binding forces might cause a trapping of the drug inside the particles and, therefore, slower release. The rate of 7e release from the loaded microspheres gradually increased, as 10% release was observed after three days (Fig 12) .This was probably due to the diffusion of the drug, which was present at the surface of the microspheres. Thereafter, constant release was observed, which may have been due to 7e diffusion and matrix Synthesis and anticancer activity of certain hydrazonoindolin-2-ones erosion mechanisms of the biodegradable PLGA polymer. Slow drug release from microspheres maybe due high encapsulation of the drug with low swelling of polymer in the release medium, leading to slow diffusion of the drug particles from polymeric matrices. Furthermore, the degradation of PLGA 50:50 is slow. Therefore, the release of 7e from microspheres may depend on drug diffusion, the PLGA surface and bulk erosion or swelling [34] .Conclusively, compound 7e was slowly and continuously released from the PLGA microspheres with no obvious burst release. This behavior is consistent with a previous study using PLGA microspheres for sustained drug release [44] and with several anticancer drugs incorporated into microspheres [33, 40, [45] [46] [47] . This formula was used for further studies on the human lung cancer cell line A549. Cell viability assay. The human lung cancer A549 cell line was incubated with various concentrations (0.8, 1.6, 3.13, 6.25, 12.5, 25 and 50 μM) of both free 7e and 7e-loaded microspheres to evaluate the anti-proliferative activity by assessing their effect on cell viability. Unloaded PLGA microspheres (lacking compound 7e) were coincubated with the same cell line to show that tumor growth was not inhibited due to the PLGA microspheres alone.

In Fig 13A, the cytotoxicity of free 7e was evaluated at0.8, 1.6, 3.13 and 6.25 μM. After 24 h of incubation time, no cytotoxicity was observed at low concentrations (0.8 and 1.6 μM), while after 72 h, only a 30% reduction in cell viability could be seen at 1.6 μM. Moreover, at 3.1 μM, 20 and 70% reductions in the cell viability were noted after 24 h and 72 h of incubation, Synthesis and anticancer activity of certain hydrazonoindolin-2-ones respectively, and almost total inhibition was observed after 120 h of incubation. A remarkable reduction in cell viability was observed at 6.25 μM = after 24 h of incubation and was maintained for 120 h of incubation. Therefore, the cytotoxicity effect of free 7e needs higher concentrations to obtain minimal to no growth of the human lung cancer cell lineA549. Synthesis and anticancer activity of certain hydrazonoindolin-2-ones Fig 13B illustrates the obtained results when 7e-loaded microspheres were incubated with the human lung cancer cell lineA549for incubation periods and concentrations similar to that of the free 7e. There was no cytotoxicity observed at 0.8 μM after 24 h of incubation, but at 1.6, 3.13 and 6.25 μM, 30, 40 and 50% reductions in cell viability were observed, respectively. After 72 h of incubation, cell viability was decreased to 10, 7 and 5%, respectively, for the same concentrations. This assay demonstrated that entrapped 7e was more effective in arresting cell growth as compared with free 7e. The enhanced cytotoxicity of 7e-loaded microspheres was observed with increasing incubation time in a concentration dependent manner. Therefore, the decrease in percentage cell viability was not immediate but rather gradual and continuous due to the polymer that allowed for slow release of 7e from microspheres and hence its gradual cytotoxic effect. The extended activity of 7e from 7e-loaded microspheres might be explained by the fact that they can be adsorbed onto the cell membrane, generating a drug concentration Synthesis and anticancer activity of certain hydrazonoindolin-2-ones gradient near the cell surface that could favor 7e to penetrate into the cell. Furthermore, the cell can phagocytize 7e-loaded microspheres, allowing 7e to be released inside the cytoplasm, thus contributing to a sustained 7e concentration [48] .

Quantitative in vitro cytotoxicity of 7e-loaded microspheres was investigated via the determination of theIC 50 value toward A549cells as compared with that of free 7e. The IC 50 value was almost the same for both the free 7e (IC 50 value = 6.51 μM) and the 7e-loaded microspheres (IC 50 value = 6.50 μM) after 24 h of incubation (Fig 14) . Increasing the incubation time of 7e-loaded microspheres to 72 and 120 h resulted in a significant reduction in its IC 50 value by approximately 85 and 90%, respectively. On the other hand, the IC 50 value of 7eloaded microspheres was reduced to approximately 60 and 70% after 72 and 120 h, respectively, as compared with the IC 50 values of free 7e. Statistical analysis revealed that these values were significantly different (P< 0.05) from the IC 50 values of free 7e.

The enhanced7e activity mediated by its incorporation into microspheres can be attributed to its sustained release, as shown in Fig 12. Microspheres can act as a reservoir for 7e, protecting the drug from hydrolysis and provide not only sustained release of the drug, but also contribute to the maintenance of drug activity. Several reported studies have emphasized that incorporation of anticancer drugs in such delivery systems improves their cytotoxic effects [49, 50] .

The synthesis and molecular characterization using different spectroscopic tools of certain isatinbased hybrids 4a-o and 7a-e are described. Compounds 4a-o and 7a-e were subjected to in vitro anti-proliferative assessment against HT-29 (colon), ZR-75 (breast) and A549 (lung) human cancer cell lines. The most active congeners in the preliminary in vitro anti-proliferative screening, compounds 7b, 7d and 7e, showed average IC 50 values of 4.77, 3.39 and 2.37 μM, respectively, as compared with the reference drug sunitinib which exhibited an average IC 50 value of 8.11 μM towards the tested human cancer cell lines. Compound 7e was selected for deeper pharmacological testing to gain insight into its possible in vitro anti-proliferative mechanism of action. It increased caspase activity by 2.4-and 1.85-fold between 4 and 8 h of treatment, respectively, at 10 μM. Moreover, compound 7e decreased the percentage of cells in the G1 phase of the cell cycle with a corresponding increase in the S-phase. The increase in S-phase cells without a concomitant G2/M phase fraction may indicate a very rapid onset of apoptosis. In addition, compound 7eincreased p-Tyr levels by nearly two-fold with an apparent IC 50 value of 3.8 μM, which is consistent with its growth inhibitory IC 50 value. Compound 7e was incorporated into biodegradable PLGA microspheres to improve its in vitro anti-proliferative activity. The results of the in vitro anti-proliferative assay indicated that 7e-loaded PLGA microspheres exhibited better cytotoxicity as compared with free 7e toward the human lung cancer cell line A549 after 3 and 5 days of incubation. 

Design, synthesis and apoptosis inducing effect of novel (Z)-3-(3'-methoxy-4'-(2-amino-2-oxoethoxy)-benzylidene)indolin-2-ones as potential antitumour agents

Benzothiazoles: search for anticancer agents

Circumventing tumor resistance to chemotherapy by nanotechnology

Anticonvulsant activity of hydrazones, Schiff and Mannich bases of isatin derivatives

Isatin-derived antibacterial and antifungal compounds and their transition metal complexes

Isatin compounds as noncovalent SARS coronavirus 3C-like protease inhibitors

Novel one-pot, three-component synthesis of spiro

Sunitinib versus interferon alfa in metastatic renal-cell carcinoma

Effect of BIBF 1120 on reversal of ABCB1-mediated multidrug resistance

Small molecule inhibitors of protein kinases in cancerhow to overcome resistance

Structure-activity-relationship studies of conformationally restricted analogs of combretastatin A-4 derived from SU5416

Anticonvulsant activity of Schiff bases of isatin derivatives

Synthesis and antimicrobial activity of 1-[(N, N-disubstituted amino) methyl]-3-[(2-phenyl-3, 4-dihydro-4-oxoquinazoline-3-yl]indole-2-one

Synthesis, antibacterial, antifungal and anti-HIV evaluation of Schiff and Mannich bases of isatin derivatives with 3-amino-2-methylmercapto quinazolin-4(3H)-one

Synthesis, antibacterial, antifungal and anti-HIV evaluation of Schiff and Mannich bases of isatin and its derivatives with triazole

Synthesis of some 3-(4'-nitrobenzoylhydrazono)-2-indolinones as potential antiviral agents

Synthesis, anticancer, and cytotoxic activities of some mononuclear Ru(II) compounds

1-Arylmethyl-2,3-dioxo-2,3-dihydroindole thiosemicarbazones as leads for developing cytotoxins and anticonvulsants

Synthesis and biological evaluation of 2-(5-substituted-1-((diethylamino)methyl)-2-oxoindolin-3-ylidene)-N-substituted-hydrazinecarbothioamides

Indirubin and meisoindigo in the treatment of chronic myelogenous leukemia in China

Synthesis, in vitro and in vivo antitumor activity of symmetrical bis-Schiff base derivatives of isatin

Indirubin, the active constituent of a Chinese antileukaemia medicine, inhibits cyclin-dependent kinases

Synthesis and antitumor activity of 7-azaindirubin

Preparation and characterization of mucoadhesive microcapsules of gliclazide with natural gums

Preparation and characterization of paclitaxel-loaded PLDLA microspheres

Novel coordination complexes of the trivalent ruthenium, rhodium and iridium with hydrazones derived from isatin hydrazide and various aldehydes with spectral and biological characterization

Synthesis and antimicrobial activity of 5-chloroindoline-2, 3-dione derivatives

Synthesis of bis-Schiff bases of isatins and their antiglycation activity

Simple and efficient microwave assisted N-alkylation of isatin

Design, synthesis and QSAR study of certain isatin-pyridine hybrids as potential anti-proliferative agents

Synthesis and biophysical insights into the bindingof a potent anti-proliferative non-symmetricbis-isatin derivative with bovine serum albumin:Spectroscopic and molecular docking approaches

Preparation and characterization of simvastatin loaded PLGA microparticles for tissue engineering applications

Formulation and evaluation of sustained release implantable microspheres of temozolomide for brain targeting prepared by a novel technique

Development of docetaxel-PLGA-nanoparticles and in vitro antitumor activity in PC3 cells Targeted to Prostate Tumor

Chlorambucil encapsulation into PLGA nanoparticles and cytotoxic effects in breast cancer cell

In vitro and in vivo evaluations of PLGA microspheres containing nalmefene

Epithelioid cell cultures from rat small intestine. Characterization by morphologic and immunologic criteria

Isolation and characterization of a spontaneously immortalized human breast epithelial cell line, MCF-10

Quantitative studies of the growth of mouse embryo cells in culture and their development into established lines

Prevention of local tumor growth with paclitaxel-loaded microspheres

Preparation and characterization of Δ9-tetrahydrocannabinol-loaded biodegradable polymeric microparticles and their antitumoral efficacy on cancer cell lines

Preparation and in-vitro evaluation of controlled release PLGA microparticles containing triptoreline

Preparation, characterization and in vitro cytotoxicity of indomethacin-loaded PLLA/PLGA microparticles using supercritical CO 2 technique

Sustained release donepezil loaded PLGA microspheres for injection: Preparation, in vitro and in vivo study

Cytotoxicity of pharmaceutically optimized nanometric systems of a chemotherapeutic drug on breast and liver tumor cells

Controlled release of Dutasteride from biodegradable microspheres: In vitro and in vivo studies

Preparation, characterization and evaluation of drug release properties of simvastatin-loaded PLGA microspheres

Formulation, in vitro drug release study and anticancer activity of 5-fluorouracil loaded gellan gum microbeads

The effect of temozolomide/poly (lactide-co-glycolide) (PLGA)/nano-hydroxyapatite microspheres on glioma U87 cells behavior

Formulation, characterization and evaluation of curcumin-loaded PLGA nanospheres for cancer therapy