key: cord-0023047-pb65c969
authors: Ataei, Mahshid; Roufogalis, Basil D.; Kesharwani, Prashant; Jamialahmadi, Tannaz; Sahebkar, Amirhossein
title: Harnessing Therapeutic Potentials of Statins Using Nanofibrous Carriers
date: 2021-11-02
journal: Bioinorg Chem Appl
DOI: 10.1155/2021/7265505
sha: be2d5f94654a5aeeb78833f7c248a9faff9707e2
doc_id: 23047
cord_uid: pb65c969

Statins are a wide category of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase inhibitor drugs extensively prescribed for hypercholesterolemia. In fact, many studies showed beneficial effects of these agents on a variety of related illnesses, which include increased atherosclerotic plaque stability, decreased proliferation of vascular smooth muscle, platelet aggregation, the dampening of vascular inflammation, and also anabolic effects on bone tissue. Therefore, these drugs are considered as pleiotropic agents having different clinical applications other than those for which they were initially developed. Controlled drug delivery is an efficient way of delivery in tissue engineering. Amongst different controlled release formulations, nanofibers are a novel, alternative, widely used agent because of their unique properties. These include their sustained release of drug, a high drug-loading capacity, flexible shapes with a high surface-to-volume ratio, and superior porosity. Electrospinning is an economic and a simple method employed to produce nanofibers. In this report, studies related to statin nanofiber applications have been reviewed and their results have been summarized. Four different applications of statin nanofibers have been reported, including bone generation, endothelial stenosis and thrombosis, peripheral nerve injury, and anti-inflammatory action. Studies carried out both in vitro and in vivo showed effectiveness of statins in bone healing, aneurysm, and the healing of sciatic nerve injury. In addition, statins showed apoptosis effects and anti-inflammatory effects, with dose-dependent reduction of IL-6 and dose-independent reduction of TNF-α. Despite these promising results, validation via clinical trials is yet to be performed. The scope of statins in their pleiotropic range of actions is still not completely explored, and studies are still needed to enlighten different useful aspects of such drugs.

e 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase inhibitors (statins) have been in use for more than 30 years to decrease the rate of occurrence of coronary artery disease and stroke. Despite the introduction of newer agents [1] [2] [3] , statins are mostly prescribed for hypercholesterolemia because of their effect in reducing LDL [4] . Statins inhibit isoprenoid important lipid attachments, which are crucial for intracellular signaling of molecules like Rho, Rac, and CDC42 [5] . In cell culture and from animal studies, these effects have been shown to alter the expression of endothelial nitric oxide synthase, increase the stability of atherosclerotic plaques, and enhance the reactivity of platelets and production of proinflammatory cytokines and reactive oxygen species, along with effects on development of cardiac hypertrophy and fibrosis [6] . e results obtained from these studies demonstrate that statins in general have cholesterolindependent activities [5, 6] . In fact, statins are pleiotropic agents with different clinical applications [7] [8] [9] [10] [11] [12] [13] , the action of which can be related or unrelated to the basic mechanism involved. ese effects may be beneficial (such as the inhibition of HMG-CoA reductase) or neutral or even cause unwanted effects like toxicity and other related side effects [14, 15] . Major beneficial effects of statins include improvements of endothelial function and blood flow with increased stability of atherosclerotic plaques and inhibition of vascular smooth muscle proliferation and platelet aggregation, with overall dampening of vascular inflammation [16] . In addition, statins have been shown to improve arrhythmias (atrial fibrillation and ventricular tachyarrhythmias) [17] . Additional actions are induction of an anabolic effect on the bone tissue [18] . Several preclinical studies suggested that statins can inhibit tumor growth and also induce apoptosis in specific types of cancer [19] .

ere are several methodologies which can be employed to alleviate the effects of neointimal hyperplasia. Amongst them, the new drug-eluting stents (DESs) have a significant potential in reducing this condition. erefore, use of stents and statins for coronary artery disease (CAD) is common with statin treatment, consistent with their lipid-lowering, antioxidative actions, and anti-inflammatory and antithrombotic effects useful for treating patients at different stages of the CAD disease [20] .

Another effect of statins is their potential for osseointegration. Studies have shown the effects of statins on the activation of osteoblasts and reduction of osteoclasts both in vivo and in vitro, along with increased expression of bone morphogenetic protein-2 (BMP-2) [21] , following inhibition of the mevalonate pathway [22] . Furthermore, recent studies have revealed that statins generally increase the expression of vascular endothelial growth factor (VEGF) [21] . In addition, the concentration of osteoprotegerin-(OPG-) binding protein, a soluble homodimer which is secreted from the osteoblasts, is highly increased after bone injury. It also antagonizes the receptor activator of nuclear factor-κB ligand (RANKL), a known osteoclast formation molecule. Statins simulate the production of OPG and as a result, they are recommended as bone generator and integrator agents [21, 22] .

Electrospinning is simple, economical, and versatile and provides a method in which polymer solution or melt undergo stretching and elongation through electrostatically driven jets, thereby forming polymer nanofibers (NFs). is method consists of three main parts including a source of high voltage, a syringe pump, and a conductive collector [23] . e diameter of these NFs ranges from nanometers to micrometers, and they are generally prepared using pharmaceutical and biodegradable polymer [24, 25] . ese NFs characteristics are controlled by various parameters, including the solution characteristics, controlled variables, polymer properties, and processing variables such as applied voltage, distance, temperature, and flow rate [26] . Most recently, this method is mostly used for loading drugs for use as a novel drug delivery system (DDS).

Controlled drug delivery is an efficient and modern way of delivery in tissues and in tissue engineering processes [27, 28] . Drug delivery and tissue engineering have some similar requirements, as both drug delivery vehicles and tissue engineering scaffolds need to be biocompatible and biodegradable, properties which can be well met with the aid of the electrospinning process [26] . Electrospun nanofibers are the most widely used carriers of biomolecules and have many advantages, including sustained drug release, high efficiency of drug loading, flexibility in shape, high surfaceto-volume ratio, and high porosity [27] . Because of their specific characteristics, these NFs are extensively utilized in drug delivery in treating different disorders [22] .

Inorganic materials including metals, surface-treated/ceramic-coated metals, and bioactive ceramics (particularly calcium phosphate ceramics) have been widely used in bone tissue engineering and actively bind to the bone. Since the bone composition is mainly of type I collagen and inorganic crystals of carbonate-substituted HA (a basic calcium component), those implanted surfaces containing such materials (synthetic HA) will reveal osteoinductive properties. Adding these materials to electrospun NFs will improve the adhesion and differentiation of cells.

is was shown in a study where after adding collagen/n-HA to PLGA NFs increased osseointegration and bone regeneration [26] . In addition, inorganic nanoparticles (NPs) like halloysite nanotubes (HNTs), carbon nanotubes (CNTs), graphene, nanohydroxyapatite (n-HA), Laponite ® (LAP), and mesoporous silica (MMS) are widely used because of their high surface ratio and higher drug-loading capacity.

ese NPs are biocompatible and promote cell functionality that can make them useful in tissue engineering. As an example, a study showed that nanosilicate (nSi) has a high degree of effectiveness in promoting bone healing [29] . However, studies showed that combining these inorganic NPs with electrospun nanofibers (NFs), thereby creating a hybrid of organic/inorganic NFs, revealed improved drug loading and cellular response, which makes them more useful in both drug delivery and tissue engineering application. On the other hand, inorganic NP loading in nanofibers significantly increased NFs mechanical properties, cell adhesion, migration, proliferation, and differentiation. ese hybrid NFs prolong drug release and inhibit burst release of drugs, with application as an antibiotic and in cancer drug delivery. As an example, some antibiotic drugs such as amoxicillin (AMX) and tetracycline hydrochloride (TCH) can be formulated as organic/inorganic NFs. In addition, anticancer drugs can be loaded in these hybrid forms. One such cancer drug which has been widely studied is doxorubicin (DOX), where the hybrid formulation sustainably releases the drug [30] . Recently, nanotechnology and nanoscience-based organic-inorganic composites are developed to expand the market in tissue engineering [26] . However, these kinds of scale-up formulation studies are limited; therefore, to find out more about their safety and stability, in vivo studies should be done in preparation for clinical trials [30] .

Currently, several statin nanofibers have been synthesized for different purposes, especially bone regeneration and endothelial stenosis reduction. We have reviewed literature studies and identified a number of studies related to the clinical application of statin nanofibers. We review and summarize a number of such studies here.

To this purpose, they prepared slow-release core-sheath poly(vinyl alcohol)/silk fibroin nanofibers (PVA-SF coreshell NFs) with rosuvastatin (RSV) by a coaxial electrospinning process. After culturing the hADSCs on RSVloaded NFs, these NFs have significantly upregulated osteogenesis markers such as Col 1, RUNX2, alkaline phosphatase (ALP) (two early osteogenesis markers), and osteocalcin (OCN) (a late osteogenesis marker) compared to free-drug NFs. Also, ARS staining confirmed the osteogenesis by showing calcium formation. erefore, the PVA-SF core-shell NFs, with sustained release of RSV, provide suitable applications in bone tissue engineering [31] . In another study by Kalani et al., RSV has been immobilized on silk fibroin (SF) NFs with the aid of an Argon Plasma method. e SF-RSV-P3, after 3 minutes of treatment with plasma, induced hADSCs proliferation and osteogenic differentiation more than all other formulations. In confirmation, proliferation and expression of Col1, RUNX2, ALP, and OCN were seen more in the case of the SF-RSV-P3 group. In addition, ARS staining showed the greatest calcium formation, attributed to higher RSV release from SF-RSV-P3 [31] . Furthermore, Rezk et al. in another study revealed that their novel formulation (functional composite nanofibers (FCNs)), which was loaded with beta-tricalcium phosphate (β-TCP) and simvastatin (SIM), showed better bone regeneration in comparison to the control group (pure NFs) with sustained drug release [32] . Another study by Rezk et showed a significant adhesion rate and an increase in ECM rates, demonstrating successful mineralization, after 5 days [33] . In addition, in another study in [32] , composite PCL/ HA/simvastatin electrospun nanofibers (PCLHSs) were devised by coating them on biodegradable Mg alloy. In this study, CCK assay data showed that PCLHS had the highest cell proliferation rate amongst other samples, which again reveals the osteogenesis effect of simvastatin. Also, SEM findings showed that MC3T3 mouse osteoblast cell attachment was the highest in the PCLHS group, indicating that this formulation is a biocompatible candidate for bone regeneration [32] .

Chitosan nanofiber membranes, with or without simvastatin, showed acceptable bone regenerations in rat calvarial defects. e results from the study showed no significant difference between the control and experimental groups in bone regeneration, and therefore, more studies still need to be performed [35] . Another study tested novel NF scaffolds on calvarial defects in rats. Simvastatin-loaded electrospun spiral-wound PCL scaffolds after 3-6 months significantly reconstructed the 8 mm calvarial defect with an increased mineralization rate compared to free PCL scaffolds. Although PCL scaffolds do promote bone mineralization, they are however generally limited to nonhealing in extent [36] (Figure 2 ). Employing the "Simvastatin-Releasing, Biodegradable, Nano to Microscale Fiber Scaffold (SRBFS)" promoted considerably higher bone formation than the free scaffolds (BFS) after 12 weeks of implantation in mice. is was further confirmed by the rate of calcium deposition and ALP activity, which were comparatively higher in the SRBFS group [37] . In the study by Hajializade et al., simvastatin and/or ezetimibe-loaded polyurethane (PU) nanofibers showed significant bone healing and increased bone density in a 5-7 mm femoral defect in rats. Amongst the three formulations, combination of simvastatin and ezetimibe nanofibers showed the highest bone density and healing effects [22] .

A study by Chu et al. evaluated the proliferation and attachment efficacy of atorvastatin calcium (AtvCa) embedded in poly(L-lactide-co-caprolactone) (PLCL) nanofiber-covered stents within vascular endothelial cells (HUVECs). e study revealed that these NFs showed controlled release and could induce HUVEC proliferation in a dose-dependent manner. e effect was dependent on concentration, as with 5 ± 1 nM of AtvCa or PLCL-AtvCa10 nanofiber, HUVEC proliferation was increased, whereas with 12 nM AtvCa, it decreased [38] (Figure 3) .

A heparin-rosuvastatin (Rosu)-loaded P(LLA-CL) nanofiber-covered stent tested in smooth muscle cells (SMCs) showed that by increasing the Rosu concentration, the SMC proliferation decreased [39] . Another study by Liu et al. used a new rosuvastatin calcium and heparin-loaded PLCL scaffold, comprising a core solution of 150 mg/mL heparin and 10 mg/ mL rosuvastatin. e volume ratios of heparin-to-rosuvastatin calcium solution were 450 : 50 mL (Rosu 50), 425 : 75 mL (Rosu 75), and 400 :100 mL (Rosu 100). Between these, Rosu 75 and Rosu 100 demonstrated significant anticoagulation and RBC attachment inhibition. In this study, a rabbit aneurysm model was created and DSA followed up after 4 months revealed that aneurysms disappeared slowly in all Rosu groups. Rosu 100 showed the best reendothelization and intima coverage results amongst its counterparts (covered stents). In addition, it was also discovered that rosuvastatin normally increased the VEGF-A levels [40] . In a recent study conducted by Feng et al., a novel stent covered with heparin and rosuvastatin calciumloaded P(LLA-CL) nanofibers was tested for the treatment of aneurysm. CCK-8 assay was used for evaluating the proliferation and adhesion rates of HUVECs, which after 36 hours reported better proliferation and adhesion for Rosu 75 and Rosu 100 than Rosu 50 and free-drug NFs. Moreover, Rosu 100 promoted the best anticoagulation ability. As both heparin and rosuvastatin have anticoagulation ability, a synergistic effect results in these formulations [41] . Lee et al. produced novel Figure 5 : In vivo animal model for peripheral nerve injury on the sciatic nerve (a). A healthy sciatic nerve after surgical splitting of the muscles (b). Application of the Yasargil aneurism clip for trauma on the sciatic nerve (c). e sciatic nerve injury site after removal of the Yasargil aneurism clip (d). Implantation of composite nanofibers around the injured sciatic nerve just after the trauma (e). Scanning electron microscopy images of (e). Composite nanofibers containing ALA-and ATR-loaded chitosan nanoparticles (f ). ATR-loaded chitosan nanoparticles existing in the composite nanofiber structure; reproduced with permission from [44] . 

In a DSA follow-up study with a rabbit aneurysm model, aneurysms completely disappeared after one month of administration. All atorvastatin calcium (AtvCa) in the PLCL nanofiber-covered stents was fully embedded on the artery, with the exception of PLCL-AtvCa5. Among the various formulations, PLCL-AtvCa10 gave the best results, including reendothelization and intimal hyperplasia [38] . In the study by Liu et al., an aneurysm was induced in the right common carotid artery (CCA) of the rabbit. A heparinrosuvastatin-loaded P(LLA-CL) nanofiber-covered stent was then placed on the aneurysms. e DSA follow-up showed that after 30 days, aneurysms decreased and gradually disappeared. No stenosis in the CCAs was found in either the short-or long-term follow-ups. is was also seen among different formulations. e best effectiveness in reducing instent stenosis and thrombosis was shown by Rosu 100 with 15% heparin and 20 μM rosuvastatin solution (400 : 100 μL) [39] (Figure 4 ). e authors considered that Sciatic Functional Index (SFI), BBB score, Extensor Postural rust Test (EPT), Withdrawal Reflex Latency (WRL), ultrastructural examination, and measures of TNF-α, IL-1β, and IL-6 levels showed better results for the ALA/ATR group than other formulations and the control group. Also, it should be mentioned that all ATR groups suppressed the inflammation factors well [44] .

Herein, studies related to various in vitro (Table 1 ) and in vivo (Table 2) applications of statin nanofibers have been reviewed, and the results of such studies are summarized. e resulting search indicates that the applications of statin nanofibers pertain to thrombosis, bone regenerative, and endothelial stenosis, along with anti-inflammatory and neuroprotective effects which were also identified in two different studies.

For bone regeneration, simvastatin and rosuvastatin in in vitro studies applied to two different cell lines hADSCs and MC3T3-E1 showed induction of cell proliferation, adhesion, and osteogenesis differentiation. Furthermore, in vivo studies in which simvastatin nanofibers were applied to calvarial or femoral defects revealed bone healing ability, with one exception. is particular study showed no difference between the statin nanofiber and free polymer nanofiber, and further investigation needs to be done.

In vitro studies in the field of endothelial stenosis and thrombosis demonstrated that atorvastatin and rosuvastatin NFs-covered stents caused HUVEC proliferation and adhesion in a dose-dependent manner. In one study, a low dose Bioinorganic Chemistry and Applications (5 ± 1 nM) of AtvCa increased proliferation, whereas at a higher dose (12 nM), HUVEC proliferation decreased. Addition of an anticoagulant agent like heparin to the formulation showed a synergistic effect. Moreover, addition of paclitaxel showed inhibition in SMC proliferation. Reduction of SMC proliferation, anticoagulation, RBC attachment inhibition, reendothelization, and intima coverage increased VEGF-A levels, with simultaneous decrease in platelet adhesion. is was confirmed from other in vitro findings, which overall confirm the antithrombosis and reendothelization actions. In all in vivo studies in rabbits, where CCA aneurysm was induced, disappearance of the clot was observed at particular time durations.

One study on atorvastatin NFs revealed that anti-inflammatory effect of these agents is related to the decrease in both TNF-α and IL-6 secretions. While the reduction of IL-6 occurred in a dose-dependent manner, TNF-α reduction was not dose related. is anti-inflammatory effect is also detected in some endothelial stenosis and bone regeneration studies.

Finally, experiments involving peripheral nerve injuries like sciatic nerve crush have also been treated by a NF formulation containing atorvastatin and ALA.

Following these studies, it can be concluded that statin NFs, specifically atorvastatin, simvastatin, and rosuvastatin, are effective in healing bone fracture, aneurysm, and sciatic nerve crush as a result of their sustained drug release profile, although clinical trials still need to be performed to confirm these data. erefore, these collective results reveal that statins are pleiotropic agents that are effective in various different fields apart from hypercholesterolemia. In addition, more studies are still needed to discover new applications of these promising agents.

No data were used to support this review article.

e authors declare that they have no conflicts of interest.

Beyond statins and PCSK9 inhibitors: updates in management of familial and refractory hypercholesterolemias

New LDL-cholesterol lowering therapies: pharmacology, clinical trials, and relevance to acute coronary syndromes

New therapies targeting apoB metabolism for high-risk patients with inherited dyslipidaemias: what can the clinician expect

Current perspectives on statins

Pleiotropic effects of statin therapy: molecular mechanisms and clinical results

Pleiotropic effects of statins on the cardiovascular system

Beneficial effect of statin therapy on arterial stiffness

Effect of statins on toll-like receptors: a new insight to pleiotropic effects

Targeting AMPK by statins: a potential therapeutic approach

Effects of statins on the biological features of mesenchymal stem cells and therapeutic implications

Improved COVID-19 ICU admission and mortality outcomes following treatment with statins: a systematic review and meta-analysis

Effects of statins on brain tumors: a review

Effects of statins on mitochondrial pathways

Statin therapy and plasma coenzyme Q10 concentrations-a systematic review and metaanalysis of placebo-controlled trials

Beneficial cardiovascular pleiotropic effects of statins

Pleiotropic effects of statins

e pleiotropic effects of statins-from coronary artery disease and stroke to atrial fibrillation and ventricular tachyarrhythmia

e role of statins in the differentiation and function of bone cells

Pleiotropic effects of statins: A focus on cancer

Stents and statins: history, clinical outcomes and mechanisms

e influence of statins on osseointegration: a systematic review of animal model studies

Significant effect of simvastatin and/or ezetimibe-loaded nanofibers on the healing of femoral defect: an experimental study

A summary of electrospun nanofibers as drug delivery system: drugs loaded and biopolymers used as matrices

Electrospinning and electrospun nanofibers: methods, materials, and applications

Electrospun nanofiber-based drug delivery systems

Electrospun inorganic and polymer composite nanofibers for biomedical applications

Electrospun nanofiber reinforced composites: a review

Electrospinning as a powerful technique for biomedical applications: a critically selected survey

Electrospun nanosilicates-based organic/inorganic nanofibers for potential bone tissue engineering

Construction of electrospun organic/inorganic hybrid nanofibers for drug delivery and tissue engineering applications

Electrospun coresheath poly (vinyl alcohol)/silk fibroin nanofibers with rosuvastatin release functionality for enhancing osteogenesis of human adipose-derived stem cells

Composite PCL/HA/simvastatin electrospun nanofiber coating on biodegradable Mg alloy for orthopedic implant application

Polyaniline-coated titanium oxide nanoparticles and simvastatin-loaded poly(ε-caprolactone) composite nanofibers scaffold for bone tissue regeneration application

Electrospinning: a fascinating fiber fabrication technique

Evaluation of bone regeneration of simvastatin loaded chitosan nanofiber membranes in rodent calvarial defects

In vivo performance of simvastatin-loaded electrospun spiral-wound polycaprolactone scaffolds in reconstruction of cranial bone defects in the rat model

Osteogenic induction of bone marrow-derived stromal cells on simvastatin-releasing, biodegradable, nano-to microscale fiber scaffolds

An atorvastatin calcium and poly (L-lactide-co-caprolactone) core-shell nanofiber-covered stent to treat aneurysms and promote reendothelialization

A heparin-rosuvastatin-loaded P(LLA-CL) nanofiber-covered stent inhibits inflammatory smooth-muscle cell viability to reduce in-stent stenosis and thrombosis

Rosuvastatin-and heparin-loaded poly(l -lactide-co-caprolactone) nanofiber aneurysm stent promotes endothelialization via vascular endothelial growth factor type A modulation

Heparin and rosuvastatin calcium-loaded poly(l-lactide-co-caprolactone) nanofibercovered stent-grafts for aneurysm treatment

Novel Bifurcation Stents Coated with Bioabsorbable Nanofibers with Extended and Controlled Release of Rosuvastatin and Paclitaxel

Anti-inflammatory effect of active nanofibrous polymeric membrane bearing nanocontainers of atorvastatin complexes

Composite nanofibers incorporating alpha lipoic acid and atorvastatin provide neuroprotection after peripheral nerve injury in rats

Functional composite nanofibers loaded with β-TCP and SIM as a control drug delivery system

Poly (ε-caprolactone)/ poly (glycerol Sebacate) composite nanofibers incorporating hydroxyapatite nanoparticles and simvastatin for bone tissue regeneration and drug delivery applications

Osteogenic potential of rosuvastatin immobilized on silk fibroin nanofibers using argon plasma treatment

Atorvastatin calcium and poly (L-lactide-cocaprolactone) core-shell nanofiber covered stent separating aneurysm and promoting endothelialization