key: cord-0066049-k869mlu2 authors: Wei, Lan-Yi; Lin, Wei; Leo, Bey-Fen; Kiew, Lik-Voon; Chang, Chia-Ching; Yuan, Chiun-Jye title: Development of the Sensing Platform for Protein Tyrosine Kinase Activity date: 2021-07-15 journal: Biosensors (Basel) DOI: 10.3390/bios11070240 sha: dda54aa24f44e7ca2371a15800ac7b1af23cbce5 doc_id: 66049 cord_uid: k869mlu2 A miniature tyrosinase-based electrochemical sensing platform for label-free detection of protein tyrosine kinase activity was developed in this study. The developed miniature sensing platform can detect the substrate peptides for tyrosine kinases, such as c-Src, Hck and Her2, in a low sample volume (1–2 μL). The developed sensing platform exhibited a high reproducibility for repetitive measurement with an RSD (relative standard deviation) of 6.6%. The developed sensing platform can detect the Hck and Her2 in a linear range of 1–200 U/mL with the detection limit of 1 U/mL. The sensing platform was also effective in assessing the specificity and efficacies of the inhibitors for protein tyrosine kinases. This is demonstrated by the detection of significant inhibition of Hck (~88.1%, but not Her2) by the Src inhibitor 1, an inhibitor for Src family kinases, as well as the significant inhibition of Her2 (~91%, but not Hck) by CP-724714 through the platform. These results suggest the potential of the developed miniature sensing platform as an effective tool for detecting different protein tyrosine kinase activity and for accessing the inhibitory effect of various inhibitors to these kinases. Protein tyrosine kinases are one of the phosphotransferase families that transfer γphosphate of adenosine triphosphate (ATP) to the tyrosine residues of the target proteins [1] . Tyrosine phosphorylation has been shown to play essential roles in many cellular events, such as cell proliferation and differentiation, protein synthesis, cell cycle, embryo development, cell migration and apoptosis [2] [3] [4] [5] . Dysregulation of protein tyrosine kinases, either by overexpression or overactivation, leads to many diseases, such as diabetes, neuronal degenerative diseases, and cancers [6] [7] [8] [9] [10] [11] [12] . For example, many human tumors, such as non-small cell lung cancer, squamous cell carcinoma of the head and neck, glioblastoma, pancreatic cancer, ovarian cancer, breast cancer, and prostate cancer were found to closely relate to the over-activation of human epidermal growth factor receptor 2 (Her2), a subfamily of ErbB (erythroblastic oncogene B) protein tyrosine kinases [8, [10] [11] [12] [13] [14] [15] . Meanwhile, dysregulation of hematopoietic cell kinase (Hck), a Src family protein tyrosine kinase [16] , The working area (0.3 × 0.3 cm 2 ) of a CFP strip (0.3 × 1.0 cm 2 ) was first cleaned with oxygen plasma using a plasma cleaner (Atto, Diener Electronic, Ebhausen, Germany). The plasma treatment was performed under the oxygen pressure of 0.4 N and a power of 75 watts for 15 s. After plasma treatment, the CFP strip was rinsed once with double deionized water (d.d. H 2 O), followed by spreading 2 µL of 0.4% chitosan/1% acetic acid solution on the working area and then air-dried. The immobilization of tyrosinase (200 U) was performed by first mixing with the mixture of 10 mM NHS and 10 mM EDC in 50 mM phosphate buffer, pH 6.6. After incubating at room temperature for 15 min, the tyrosinase/EDC/NHS mixture (6 µL) was then spread on the working area of CFP under the room temperature for at least 2 h. The miniature tyrosine kinase sensing platform consists of a polylactic acid (PLA) holder, a working electrode, a platinum counter electrode and a Ag/AgCl reference electrode ( Figure S1 , Supplemental information). The PLA holder, generated by the 3D printer (Botfeeder Co., Taiwan), is a rectangular block (4.2 × 4.2 × 7.5 cm 3 ) with a cavity of 1.8 × 1.9 × 5.7 cm 3 . It is composed of two parts: (a) the desk-like top part (~5.5 cm height) contains a hole of 0.8 cm in diameter to place the reference electrode; (b) the C-shaped bottom part (~2 cm height) contains a rectangular cleft of 0.3 × 0.05 cm 2 to fix the working electrode. Once the holder was assembled, the counter (Pt wire) and reference electrodes (CH Instruments, West Lafayette, IN, USA) were fixed on top of the working electrode at a vertical distance of 2 mm ( Figure S1 ). The kinase reaction of Hck and Her2 was performed by mixing 2 µL of protein kinase stock solution with 18 µL kinase reaction mixture (60 mM HEPES, pH 7.5, containing 3 mM MgCl 2 , 3 mM MnCl 2 , 100 µM substrate peptide and 0.5 mM ATP) in a microfuge tube and incubated at 30 • C for a period of time. The electrochemical responses of the tyrosine kinases on the miniature sensing platform were determined by amperometric current-time responses (i-t curve). The space between working and counter/reference electrodes ( Figure 1 ) was first filled with 18 µL of 100 mM phosphate buffer (pH 6.5). The electrochemical measurement was started by injecting 1-2 µL peptide stock solution of kinase reaction mixture into the phosphate buffer with pipetting and monitoring the electrochemical responses under the potential of −0.2 V vs. Ag/AgCl [38] on the electrochemical analyzer CHI 6116e (CH Instruments, West Lafayette, IN, USA). Kinase activity of Hck and Her2 was determined by the net electrochemical responses before and after phosphorylation. The working area (0.3 × 0.3 cm 2 ) of a CFP strip (0.3 × 1.0 cm 2 ) was first cleaned with oxygen plasma using a plasma cleaner (Atto, Diener Electronic, Ebhausen, Germany). The plasma treatment was performed under the oxygen pressure of 0.4 N and a power of 75 watts for 15 s. After plasma treatment, the CFP strip was rinsed once with double deionized water (d.d. H2O), followed by spreading 2 μL of 0.4% chitosan/1 % acetic acid solution on the working area and then air-dried. The immobilization of tyrosinase (200 U) was performed by first mixing with the mixture of 10 mM NHS and 10 mM EDC in 50 mM phosphate buffer, pH 6.6. After incubating at room temperature for 15 min, the tyrosinase/EDC/NHS mixture (6 μL) was then spread on the working area of CFP under the room temperature for at least 2 h. The miniature tyrosine kinase sensing platform consists of a polylactic acid (PLA) holder, a working electrode, a platinum counter electrode and a Ag/AgCl reference electrode ( Figure S1 , Supplemental information). The PLA holder, generated by the 3D printer (Botfeeder Co., Taiwan), is a rectangular block (4.2 × 4.2 × 7.5 cm 3 ) with a cavity of 1.8 × 1.9 × 5.7 cm 3 . It is composed of two parts: (a) the desk-like top part (~5.5 cm height) contains a hole of 0.8 cm in diameter to place the reference electrode; (b) the C-shaped bottom part (~2 cm height) contains a rectangular cleft of 0.3 × 0.05 cm 2 to fix the working electrode. Once the holder was assembled, the counter (Pt wire) and reference electrodes (CH Instruments, West Lafayette, IN, USA) were fixed on top of the working electrode at a vertical distance of 2 mm ( Figure S1 ). The kinase reaction of Hck and Her2 was performed by mixing 2 μL of protein kinase stock solution with 18 μL kinase reaction mixture (60 mM HEPES, pH 7.5, containing 3 mM MgCl2, 3 mM MnCl2, 100 μM substrate peptide and 0.5 mM ATP) in a microfuge tube and incubated at 30 °C for a period of time. The electrochemical responses of the tyrosine kinases on the miniature sensing platform were determined by amperometric current-time responses (i-t curve). The space between working and counter/reference electrodes ( Figure 1 ) was first filled with 18 μL of 100 mM phosphate buffer (pH 6.5). The electrochemical measurement was started by injecting 1-2 μL peptide stock solution of kinase reaction mixture into the phosphate buffer with pipetting and monitoring the electrochemical responses under the potential of −0.2 V vs. Ag/AgCl [38] on the electrochemical analyzer CHI 6116e (CH Instruments, West Lafayette, IN, USA). Kinase activity of Hck and Her2 was determined by the net electrochemical responses before and after phosphorylation. A miniature protein tyrosine kinase sensing platform ( Figure 1 and Figure S1 ) with a three-electrode setup was developed that allowed the detection of peptide substrates in a volume as small as 18 µL (Figure 1 ). The ability of the miniature sensing platform to detect the peptides with tyrosine residue(s) was demonstrated by measuring the i-t responses of c-Src substrate 1 peptide, which was successively added into the phosphate buffer ( Figure 2 ). The step current responses were observed under the potential of −0.2 V (with a response time from 85 to 42 s), suggesting the capability of the miniature sensing platform to detect the tyrosine residue-bearing peptides without regenerating the electrode surface. However, following the successive addition of c-Src substrate 1, the responses decreased gradually. It may be due to the increase in detection volume during the successive measurements that lead to dilution of the peptide concentrations. This hypothesis could be demonstrated by plotting the responses curves of c-Src substrate 1 concentrations vs. current responses from the results of Figure 2 . Since the volume of electrolyte expanded from 18 µL to 32 µL upon the successive injection of c-Src substrate 1 stock solution, the final concentration of peptide after each addition could then be calculated by multiplying the corresponding dilution factor. As shown in Figure S2 , the current responses of c-Src substrate 1 was linearly proportional to i-t concentration after adjustment with an R 2 of 0.998. The developed miniature tyrosinase-based tyrosine kinase sensing platform exhibited a repeatability of 6.6% RSD (Relative standard deviation) for a repetitive measurement of 50 µM c-Src substrate I (n = 6) ( Figure S4 ). A miniature protein tyrosine kinase sensing platform (Figures 1 and S1 ) with a threeelectrode setup was developed that allowed the detection of peptide substrates in a volume as small as 18 μL (Figure 1 ). The ability of the miniature sensing platform to detect the peptides with tyrosine residue(s) was demonstrated by measuring the i-t responses of c-Src substrate 1 peptide, which was successively added into the phosphate buffer ( Figure 2 ). The step current responses were observed under the potential of −0.2V (with a response time from 85 to 42 s), suggesting the capability of the miniature sensing platform to detect the tyrosine residue-bearing peptides without regenerating the electrode surface. However, following the successive addition of c-Src substrate 1, the responses decreased gradually. It may be due to the increase in detection volume during the successive measurements that lead to dilution of the peptide concentrations. This hypothesis could be demonstrated by plotting the responses curves of c-Src substrate 1 concentrations vs. current responses from the results of Figure 2 . Since the volume of electrolyte expanded from 18 μL to 32 μL upon the successive injection of c-Src substrate 1 stock solution, the final concentration of peptide after each addition could then be calculated by multiplying the corresponding dilution factor. As shown in Figure S2 , the current responses of c-Src substrate 1 was linearly proportional to i-t concentration after adjustment with an R 2 of 0.998. The developed miniature tyrosinase-based tyrosine kinase sensing platform exhibited a repeatability of 6.6% RSD (Relative standard deviation) for a repetitive measurement of 50 μM c-Src substrate I (n = 6) ( Figure S4 ). The specificity of the miniature sensing platform to recognize peptide with tyrosine residues was further demonstrated by alternately adding 10 μM FLT3, a Her2 peptide substrate, and 100 μM kemptide, and a PKA peptide substrate into the phosphate buffer ( Figure S3A , Supplemental information). The electrochemical responses occurred only when FLT3 was added into the phosphate buffer. Similar results were also observed when ELMO-Y511, a Hck peptide substrate, and kemptide were alternately added ( Figure S3B ). The specificity of the miniature sensing platform to recognize peptide with tyrosine residues was further demonstrated by alternately adding 10 µM FLT3, a Her2 peptide substrate, and 100 µM kemptide, and a PKA peptide substrate into the phosphate buffer ( Figure S3A , Supplemental information). The electrochemical responses occurred only when FLT3 was added into the phosphate buffer. Similar results were also observed when ELMO-Y511, a Hck peptide substrate, and kemptide were alternately added ( Figure S3B ). Compared to the previously reported experimental setup [38] , a smaller detection volume is needed for the developed miniature sensing platform. The electrolyte required for analysis was greatly reduced from 10 mL to 0.02 mL. Previously, the miniature tyrosine kinase sensing platform was shown to be able to detect peptide substrates of protein tyrosine kinase, i.e., ELMO-Y511 and FLT3. To further elucidate the capability of miniature sensing platform in detecting the tyrosine kinase activity the dose-dependent responses and time-dependent phosphorylation of ELMO-Y511 and FLT3 were investigated. As shown in Figure 3 Compared to the previously reported experimental setup [38] , a smaller detection volume is needed for the developed miniature sensing platform. The electrolyte required for analysis was greatly reduced from 10 mL to 0.02 mL. Previously, the miniature tyrosine kinase sensing platform was shown to be able to detect peptide substrates of protein tyrosine kinase, i.e. ELMO-Y511 and FLT3. To further elucidate the capability of miniature sensing platform in detecting the tyrosine kinase activity the dose-dependent responses and time-dependent phosphorylation of ELMO-Y511 and FLT3 were investigated. As shown in Figure 3 A time-dependent phosphorylation of ELMO-Y511 and FLT3 peptides by Hck (10 U/mL) and Her2 (10 U/mL), respectively, was also determined at 30 °C for 0, 10, 30, 60, 90, and 120 min ( Figure 4 ). The reductive current of ELMO-Y511 and FLT3 peptides without phosphorylation were 4.45 × 10 −7 ± 6.70 × 10 −9 A and 4.48 × 10 −7 ± 3.03 × 10 −9 A, respectively. Upon the phosphorylation with tyrosine kinases, e.g. Hck and Her2, the reductive current of ELMO-Y511 and FLT3 peptides (i.e., 3.27 × 10 −7 ± 2.13 × 10 −8 A and 3.38 × 10 −7 ± 1.13 × 10 −8 A, respectively) reduced about 25% after 10 min reaction and reduced over 50% (i.e., 1.57 × 10 −7 ± 2.75 × 10 −8 A and 1.65 × 10 −7 ± 1.60 × 10 −8 A, respectively) after 30 min reaction. After 90 min phosphorylation, the electrochemical responses of both peptides reached plateau with a reductive current of 2.78 × 10 −8 ± 4.26 × 10 −9 for ELMO-Y511 and 4.52 × 10 −8 ± 3.06 × 10 −9 for FLT3. This result suggests that the activity of Hck and Her2 can be detected on the miniature sensing platform in a kinase reaction for as short as 10 min. A time-dependent phosphorylation of ELMO-Y511 and FLT3 peptides by Hck (10 U/mL) and Her2 (10 U/mL), respectively, was also determined at 30 • C for 0, 10, 30, 60, 90, and 120 min (Figure 4 ). The reductive current of ELMO-Y511 and FLT3 peptides without phosphorylation were 4.45 × 10 −7 ± 6.70 × 10 −9 A and 4.48 × 10 −7 ± 3.03 × 10 −9 A, respectively. Upon the phosphorylation with tyrosine kinases, e.g., Hck and Her2, the reductive current of ELMO-Y511 and FLT3 peptides (i.e., 3.27 × 10 −7 ± 2.13 × 10 −8 A and 3.38 × 10 −7 ± 1.13 × 10 −8 A, respectively) reduced about 25% after 10 min reaction and reduced over 50% (i.e., 1.57 × 10 −7 ± 2.75 × 10 −8 A and 1.65 × 10 −7 ± 1.60 × 10 −8 A, respectively) after 30 min reaction. After 90 min phosphorylation, the electrochemical responses of both peptides reached plateau with a reductive current of 2.78 × 10 −8 ± 4.26 × 10 −9 for ELMO-Y511 and 4.52 × 10 −8 ± 3.06 × 10 −9 for FLT3. This result suggests that the activity of Hck and Her2 can be detected on the miniature sensing platform in a kinase reaction for as short as 10 min. The phosphorylation of ELMO-Y511 and FLT3 peptides by various activities (0, 1, 5, 10, 50, and 100 U/mL) of Hck and Her2, respectively, was carried out at 30 • C for 30 min prior to the electrochemical measurement. As shown in Figure 5 , the phosphorylation of peptides increased linearly with the logarithm of the activity of Hck ( Figure 5A The phosphorylation of ELMO-Y511 and FLT3 peptides by various activities (0, 1, 5, 10, 50, and 100 U/mL) of Hck and Her2, respectively, was carried out at 30 °C for 30 min prior to the electrochemical measurement. As shown in Figure 5 Protein tyrosine kinase inhibitors are widely used in the laboratory to elucidate the signaling pathway as well as in the clinic to treat cancers. The effect of inhibitors can be accessed by the decrease in the protein tyrosine kinase activity after treatment. Therefore, the capability of the developed miniature tyrosine kinase sensing platform in studying the inhibitory effect of Src-I1, the inhibitor of Src family kinases [40] , and CP724714, the Her2 specific inhibitor [41] , on the corresponding kinases was studied. As shown in Figure The phosphorylation of ELMO-Y511 and FLT3 peptides by various activities (0, 1, 5, 10, 50, and 100 U/mL) of Hck and Her2, respectively, was carried out at 30 °C for 30 min prior to the electrochemical measurement. As shown in Figure 5 Protein tyrosine kinase inhibitors are widely used in the laboratory to elucidate the signaling pathway as well as in the clinic to treat cancers. The effect of inhibitors can be accessed by the decrease in the protein tyrosine kinase activity after treatment. Therefore, the capability of the developed miniature tyrosine kinase sensing platform in studying the inhibitory effect of Src-I1, the inhibitor of Src family kinases [40] , and CP724714, the Her2 specific inhibitor [41] , on the corresponding kinases was studied. As shown in Figure Figure 5 . Phosphorylation of ELMO-Y511 and FLT3 peptides by various activities of Hck and Her2. The kinase reaction was performed in kinase reaction mixture containing 0.5 mM ATP,100 µM ELMO-Y511 or FLT3 peptide and various activities (0, 1, 5, 10, 50, 100 U/mL) of Hck (A) and Her2 (B). Reaction was performed at 30 • C for 30 min. Subsequently, reaction mixture (2 µL) was subjected to electrochemical measurement under the potential of −0.2 V. The inset of each panel is the semi-log plot of the same set of data. The data is mean ± S.D of three independent experiments. Protein tyrosine kinase inhibitors are widely used in the laboratory to elucidate the signaling pathway as well as in the clinic to treat cancers. The effect of inhibitors can be accessed by the decrease in the protein tyrosine kinase activity after treatment. Therefore, the capability of the developed miniature tyrosine kinase sensing platform in studying the inhibitory effect of Src-I1, the inhibitor of Src family kinases [40] , and CP724714, the Her2 specific inhibitor [41] , on the corresponding kinases was studied. As shown in Figure 6 , the activity of Hck, a Src family kinase, could be suppressed about 88% in the presence of 176 nM Src I-1, whereas only about 13% of Her2 activity was inhibited. In contrast, 20 nM CP-72471 could inhibit Her2 activity by about 91%, but only slightly affected the Hck activity by around 12%. 6, the activity of Hck, a Src family kinase, could be suppressed about 88% in the presence of 176 nM Src I-1, whereas only about 13% of Her2 activity was inhibited. In contrast, 20 nM CP-72471 could inhibit Her2 activity by about 91%, but only slightly affected the Hck activity by around 12%. Generally, most of the protein tyrosine kinases are either membrane bound or residing in the cytoplasm. Hence, it is usually required to prepare samples from cellular extract for protein kinase assay. To understand the effect of the cell remnants or intracellular constituents in causing the interference with the electrochemical measurement, the culture medium (DMEM containing 10% fetal bovine serum) was used to prepare the kinase reaction mixture that contains peptide substrate, i.e., ELMO-Y511 or FLT3, and protein tyrosine kinases, i.e., Hck or Her2. The reductive current of ELMO-Y511 and FLT3 alone was 4.15 × 10 −7 ± 2.66 × 10 −8 A (closed bar) and 4.57 × 10 −7 ± 3.25 × 10 −8 A (open bar), respectively (Figure 7 , peptide only). When mixed with the culture medium, the electrochemical responses of ELMO-Y511 and FLT3 (peptide + culture medium) decreased slightly to 3.87 × 10 −7 ± 4.34 × 10 −8 A and 4.07 × 10 −7 ± 3.78 × 10 −8 A, respectively. This result suggests that a cell culture medium or even a cell crude extract may not affect the electrochemical measurement of peptides on the sensing platform. Generally, most of the protein tyrosine kinases are either membrane bound or residing in the cytoplasm. Hence, it is usually required to prepare samples from cellular extract for protein kinase assay. To understand the effect of the cell remnants or intracellular constituents in causing the interference with the electrochemical measurement, the culture medium (DMEM containing 10% fetal bovine serum) was used to prepare the kinase reaction mixture that contains peptide substrate, i.e., ELMO-Y511 or FLT3, and protein tyrosine kinases, i.e., Hck or Her2. The reductive current of ELMO-Y511 and FLT3 alone was 4.15 × 10 −7 ± 2.66 × 10 −8 A (closed bar) and 4.57 × 10 −7 ± 3.25 × 10 −8 A (open bar), respectively (Figure 7 , peptide only). When mixed with the culture medium, the electrochemical responses of ELMO-Y511 and FLT3 (peptide + culture medium) decreased slightly to 3.87 × 10 −7 ± 4.34 × 10 −8 A and 4.07 × 10 −7 ± 3.78 × 10 −8 A, respectively. This result suggests that a cell culture medium or even a cell crude extract may not affect the electrochemical measurement of peptides on the sensing platform. In contrast, the activity of Hck and Her2 was moderately affected by the culture medium. This is demonstrated by the finding that the phosphorylated form of ELMO-Y511 (dark bar) and FLT3 (bright bar) decreased in the kinase reaction mixture containing the culture medium (Figure 7) . The ELMO-Y511 and FLT3 peptides phosphorylating without the culture medium exhibited a response (peptide + kinase) of 8.26 × 10 −8 ± 5.31 × 10 −9 A and 8.51 × 10 −8 ± 8.39 × 10 −9 A, respectively; while in the presence of culture medium, the responses of peptides (kinase + culture medium) changed to 1.63 × 10 −7 ± 2.44 × 10 −8 A and 1.97 × 10 −7 ± 2.88 × 10 −8 A, respectively. This result indicates that the kinase activity of Hck and Her2 was suppressed 33% and 43%, respectively, by the culture medium. Although the exact mechanism underlying the medium-mediated inhibition of kinase activity is not clear, the presence of kinase inhibitors, phosphatases, proteases and/or thiol compounds, in the culture medium is postulated. Phosphotyrosine phosphatases are known to remove the phosphate group from the phosphotyrosines; while proteases contaminants can degrade protein kinases. The contamination of both substances may result in the underestimation of kinase activity. Thiol compounds, such as cysteine and glutathione, could block the reaction of tyrosinase by forming the inactive conjugates from the intermediates [42] . To avoid the influence of cellular components on the kinase reaction, the reaction mixture for protein tyrosine kinase reactions is suggested to be reformulated, such as adding phosphatase inhibitors and sample pretreatment. In contrast, the activity of Hck and Her2 was moderately affected by the culture medium. This is demonstrated by the finding that the phosphorylated form of ELMO-Y511 (dark bar) and FLT3 (bright bar) decreased in the kinase reaction mixture containing the culture medium (Figure 7) . The ELMO-Y511 and FLT3 peptides phosphorylating without the culture medium exhibited a response (peptide + kinase) of 8.26 × 10 −8 ± 5.31 × 10 −9 A and 8.51 × 10 −8 ± 8.39 × 10 −9 A, respectively; while in the presence of culture medium, the responses of peptides (kinase + culture medium) changed to 1.63 × 10 −7 ± 2.44 × 10 −8 A and 1.97 × 10 −7 ± 2.88 × 10 −8 A, respectively. This result indicates that the kinase activity of Hck and Her2 was suppressed 33% and 43%, respectively, by the culture medium. Although the exact mechanism underlying the medium-mediated inhibition of kinase activity is not clear, the presence of kinase inhibitors, phosphatases, proteases and/or thiol compounds, in the culture medium is postulated. Phosphotyrosine phosphatases are known to remove the phosphate group from the phosphotyrosines; while proteases contaminants can degrade protein kinases. The contamination of both substances may result in the underestimation of kinase activity. Thiol compounds, such as cysteine and glutathione, could block the reaction of tyrosinase by forming the inactive conjugates from the intermediates [42] . To avoid the influence of cellular components on the kinase reaction, the reaction mixture for protein tyrosine kinase reactions is suggested to be reformulated, such as adding phosphatase inhibitors and sample pretreatment. In this work, a simple and label-free miniature sensing platform for detecting the activity of protein tyrosine kinases was developed and characterized. Compared to the previous experimental setup [38] and published reports (Table 1) , the newly developed platform is simple in design, easy to operate, and requires only 1-2 μL samples for kinase activity assay. With the reduction of detection volume, the sample volume required for analysis was also significantly decreased from 20 μL to 2 μL. Simple in design and easy operation are also the advantages of the current experimental setup. These studies showed that the current experimental setup exhibits great potential for the detection of biological samples that are usually rare and expensive to acquire in large quantity. The unique tyrosinase-based detection mechanism [38] allows the developed miniature sensing platform to detect different protein tyrosine kinases on the same electrodes. This is demonstrated In this work, a simple and label-free miniature sensing platform for detecting the activity of protein tyrosine kinases was developed and characterized. Compared to the previous experimental setup [38] and published reports (Table 1) , the newly developed platform is simple in design, easy to operate, and requires only 1-2 µL samples for kinase activity assay. With the reduction of detection volume, the sample volume required for analysis was also significantly decreased from 20 µL to 2 µL. Simple in design and easy operation are also the advantages of the current experimental setup. These studies showed that the current experimental setup exhibits great potential for the detection of biological samples that are usually rare and expensive to acquire in large quantity. The unique tyrosinase-based detection mechanism [38] allows the developed miniature sensing platform to detect different protein tyrosine kinases on the same electrodes. This is demonstrated by the observation that both Hck and Her2 activity can be successively detected without changing electrodes. The platform was also effective in assessing the specificity of inhibitors on different tyrosine kinases, indicating that the platform can be used to monitor and screen the effect of drugs on different tyrosine kinases in a short time. In summary, the developed tyrosine kinase sensing platform exhibits a great potential to be a powerful tool for the detection of protein tyrosine kinase activity, the screening of tyrosine kinase-based drugs, and clinical diagnoses. Supplementary Materials: The following are available online at https://www.mdpi.com/article/ 10.3390/bios11070240/s1, Figure S1 : The structure of the miniature protein tyrosine kinase sensing platform., Figure S2 : The response curve of c-Src substrate 1 concentration vs. current responses; Figure S3 . The chronoamperometric measurement of substrate peptides for Hck and Her2; Figure S4 . Reproducibility of tyrosine kinase sensing platform. Institutional Review Board Statement: Not applicable. Data Availability Statement: Not applicable. Protein kinases and phosphatases: The yin and yang of protein phosphorylation and signaling The Protein Kinase Complement of the Human Genome Protein phosphorylation and signal transduction The protein kinases of budding yeast: Six score and more Protein Tyrosine Kinase Structure and Function Tyrosine kinase-Role and significance in Cancer Activation of tyrosine kinases in cancer Protein kinase function and glutathionylation Tyrosine phosphorylation of the fission yeast cdc2+ protein kinase regulates entry into mitosis Protein kinases as targets for cancer treatment Epidermal growth factor receptor (EGFR) signaling in cancer Specificity within the EGF family/ErbB receptor family signaling network The oncogene HER2; Its signaling and transforming functions and its role in human cancer pathogenesis An overview of HER2 HER2: An emerging biomarker in non-breast and non-gastric cancers Novel protein-tyrosine kinase gene (hck) preferentially expressed in cells of hematopoietic origin Hematopoietic cell kinase (HCK) as a therapeutic target in immune and cancer cells Protein kinase phosphorylation site sequences and consensus specificity motifs: Tabulations Chemical approaches for investigating phosphorylation in signal transduction networks A probability-based approach for high-throughput protein phosphorylation analysis and site localization Monoclonal antibodies to phosphotyrosine Probing Protein Kinase (CK2) and Alkaline Phosphatase with CdSe/ZnS Quantum Dots Development of flexible electrochemical impedance spectroscopy-based biosensing platform for rapid screening of SARS-CoV-2 inhibitors Stability of SARS-CoV-2 Spike G614 Variant Surpasses That of the D614 Variant after Cold Storage Surface active flexible palladium nano-thin-film electrode development for biosensing Enhanced Bioconjugation on Sputtered Palladium Nano-thin-film Electrode Electrochemical assay methods for protein kinase activity Electrochemical detection of kinase-catalyzed phosphorylation using ferrocene-conjugated ATP Peptide Biosensors for the Electrochemical Measurement of Protein Kinase Activity Enzymatically modified peptide surfaces: Towards general electrochemical sensor platform for protein kinase catalyzed phosphorylations Electrochemical detection of protein tyrosine kinase-catalysed phosphorylation using gold nanoparticles Gold nanoparticle-based electrochemical detection of protein phosphorylation TiO 2 -assisted silver enhanced biosensor for kinase activity profiling Electrochemical strategy for detection of phosphorylation based on enzyme-linked Electrocatalysis Label-Free Electrical Sensing of Small-Molecule Inhibition on Tyrosine Phosphorylation Electrochemical detection of tyrosine derivatives and protein tyrosine kinase activity using boron-doped diamond electrodes Graphene based electrochemical biosensor for label-free measurement of the activity and inhibition of protein. tyrosine kinase Reusable amperometric biosensor for measuring protein tyrosine kinase activity Identification of tyrosine residues on ELMO1 that are phosphorylated by the Src-family kinase Hck Structural Determinants for Potent, Selective Dual Site Inhibition of Human pp60c-src by 4-Anilinoquinazolines HER2 directed small molecule antagonists Effect of thiol compounds on melanin formation by tyrosinase Two sensitive electrochemical strategies for the detection of protein kinase activity based on the 4-mercaptophenylboronic acid-induced in situ assembly of silver nanoparticles Label-free electrochemical measurement of protein tyrosine kinase activity and inhibition based on electro-catalyzed tyrosine signaling The authors declare no conflict of interest.