key: cord-0299637-a6ifqoyb authors: Ketki Jawade, Akhauri Yash Sinha; Sharad Bhagat, Shilpa Bhowmick; Bhagyashree Chauhan, Snehal Kaginkar; Harsha Palav, Nandini Kasarpalkar; Pratik Devadiga, Kalyani Karandikar; Sachee Agarwal, Jayanthi Shastri; Kiran Munne, Vikrant M Bhor; Smita D Mahale, Subhanjan Bhowmik; Dhanashree Jagtap, Vainav Patel title: Viroselect: A novel SARS-CoV-2 detection assay to resolve inconclusive samples date: 2021-02-13 journal: nan DOI: 10.1101/2021.02.11.21251605 sha: 54fc823c2965e4925ca5cabf5b81e1911534fd43 doc_id: 299637 cord_uid: a6ifqoyb nan The striking difference between previous SARS-CoV/MERS-CoV outbreaks and the ongoing SARS-CoV-2 pandemic is the increased contagious nature of the latter . This has resulted in over 100 million SARS-CoV-2 infections globally and ~2.2 million deaths to date (WHO COVID-19 Dashboard, 2021) . India bears the second largest burden of infected individuals with 10 million infections and over 150,000 deaths so far Testing Status, 2021). Efficient and rapid diagnosis is critical to optimal management of disease spread as well as clinical management of COVID-19. To ensure maximum coverage (WHO Feature Story, 2020) and accessibility to testing at economically feasible rates, Government of India, has successfully fostered and promoted development of indigenous diagnostic kits as well integrated cutting-edge high throughput testing facilities (Gupta et al., 2020; Poljak et al., 2020) . The availability of a range of diagnostic kits with disparate viral targets has also posed a challenge in terms of concordance of results as well as inconclusive results (Bhattacharya et al., 2020; Hur et al., 2020; Pujadas et al., 2020) . Also, implementation of high-throughput platform-based testing while rapidly increasing diagnostic capability, also has the potential of generating inconclusive results. As a designated national centre of excellence for COVID-19 diagnostic kit validation as well as a high throughput testing centre and having encountered the aforementioned issues, we developed an in-house RT-PCR assay, Viroselect, which was evaluated for concordance with commonly used EUA (USFDA) manual kits as well as with our high throughput COBAS 6800 testing platform. Further we assessed its utility in resolving inconclusive tests by both testing modalities. A novel strategy (described in results) was used to design primers for detection of SARS-CoV-2. These sequence regions were unique to SARS-CoV-2 but had maximum variation with SARS-CoV and MERS-CoV. The primer and probe were optimized for an in-house Viroselect assay described below. All the primer and probes used in the study were synthesized from Macrogen Inc., Korea. . CC-BY-NC-ND 4.0 International license It is made available under a perpetuity. is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint Biplex RT-PCR assay was conducted for Viroselect assay. ORF1a (nsp3) gene for the detection of SARS-CoV-2 Virus along with human RNase P, used as internal control, from human patient samples. The primer and probe concentrations were the following, 0.5 µmole/L for primers and 0.5 µmole/L of probe concentration for ORF1a (nsp3) and 0.5 µmole/L for primers and 0.2 µmole/L of probe concentration for Human RNaseP. The TaqMan probe was labelled with 6-carboxyfluroscien (6-Fam) 5' and BHQ1 3' for ORF1a and with Cy5 at 5' end and BHQ3 at 3' end for the RNase P probe. Prime Script One-step First strand cDNA synthesis kit (Catalogue number: RR6110A, Takara Bio) along with gene specific primers (ORF1a and RNaseP) was used for cDNA preparation (as per manufacturers protocol). One step RT-PCR condition were 52º C for 5 minutes, 1 cycle (for reverse transcription), initial denaturation 95º C for 10 seconds followed by 40 cycles (for RT-PCR) of denaturation (95º C for 05 sec), (60º C for 90 sec) annealing/extension for PCR reaction. The in-house Viroselect assay was considered positive if ORF1a (nsp3) and human RNase P instructions. . CC-BY-NC-ND 4.0 International license It is made available under a perpetuity. is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101/2021.02.11.21251605 doi: medRxiv preprint As per the manufacturer, four types of interpretations were possible by the system (positive, negative, invalid, inconclusive). If target 1 (ORF), target 2 (E) and IC (non-infectious RNA in MS2 bacteriophage) were detected, the sample was interpreted as positive and if both targets were not detected but IC was detected, then the sample was interpreted as negative. If the samples showed target 1 negative, target 2 positive & IC positive, then the sample was interpreted as inconclusive. Contingency Tables was constructed and positive and negative concordance along with over all agreement between various assays was determined. Primers were designed using the SARS-CoV-2 reference genome available at NCBI genbank (Accession number: NC 045512). The primers and probe were uniquely designed for Viroselect assay from regions which had maximum variation with the SARS-CoV-2 and MERS-CoV-2. This hypervariable region was identified through NCBI align2 blast ( Figure 1a ). As shown in Table 1 the sequence targets for designing the primers and probe were present in ORF1a (nsp3) region of the SARS-CoV-2 genome between nucleotide positions 1933-3956. The internal control primer and probe were derived from human ribonuclease (RNase) P gene (GenBank accession number NM_ 006413) sequence (Emery et al., 2004) . As shown in Figure 1a , the unique design of the primer can aid in differentiating between SARS-CoV and SARS-CoV-2 during mixed infection. NCBI nBlast was performed to analyze the sequence homology of putative amplicon with more than 250 SARS-CoV-2 isolates and 100% nucleotide sequence similarity was observed. Also, primers were designed to ensure that the putative amplicon did not overlap with known major mutation hotspots prevailing globally and in India ( Figure 1b) . Additionally, care was taken to have minimum homology with the human genome to avoid nonspecific amplification (Table 1 ). Following design of primers, amplicon was generated from infected samples and verified by agarose gel electrophoresis to be of the expected size (Figure 1c ). is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101/2021.02.11.21251605 doi: medRxiv preprint Concordance Analysis: To assess the concordance of our in-house assay (Viroselect) with established and approved kits used for diagnosis, we evaluated the overall agreement of our assay with an EUA (USFDA) approved kit (SD Biosensor). RNA extraction from samples diagnosed as positive (n = 126) and negative (n = 107) for SARS-CoV-2 infection by SD Biosensor was followed by RT-PCR using Viroselect. Results revealed high concordance of the Viroselect assay with the SD Biosensor Kit as summarized in Table 2 . As shown in Figure 2 , a total of 286 samples (including 19 inconclusives) were tested of which 34 were invalid (not included in analysis). A concordance of 92.9% among positive samples and (81.3%) among negative samples was observed. An overall agreement of 87.6%, with 95% confidence interval (74.91% to 93.62%) was observed (Table 2) . Interestingly a higher rate of discordance was observed in negative samples (20 out of 107; 18.7%) compared to that in positive samples (9 out of 126; 7.1%). Notably, out of the 19 inconclusives by SD Biosensor kit, 7 (37%) were positive for Viroselect assay and 12 were negative. Of the 7 positives, six were positive when tested with another EUA (USFDA) approved RT-PCR kit, Labgun COVID-19 RT-PCR kit (LabGenomics). Further, clinical data obtained from the ICMR specimen referral form (SRF) revealed that six individuals out of seven that tested positive by Viroselect assay were symptomatic ( Figure 2 ). Thus, Viroselect was able to resolve 100% of inconclusive samples tested by SD Biosensor. As our centre transitioned to a high throughput testing facility, we also had the opportunity to establish the concordance of Viroselect with SARS-CoV-2 detection assay on the COBAS 6800 High Throughput Platform (COBAS). Known COBAS positive (n= 102), negative (n=108) were tested by Viroselect. Seven of these samples were found to be invalid and not analysed further. Results revealed high concordance of the Viroselect assay with COBAS as summarized in Table 3 . A concordance of 89% among positive samples and 84.5% among negative samples was observed with an overall agreement of 84.7%, with 95% confidence interval (76.00% to 90.85%) (Table 3) . Interestingly, a higher rate of discordance was observed in negative samples (16 out of 103; 15.5%) compared to that in positive samples (11 out of 100; 11%). is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101/2021.02.11.21251605 doi: medRxiv preprint As shown in Figure 3 , a total of 205 inconclusive samples were also tested of which 13 were invalid (not included in analysis). Of these, 175 (91.2%) tested negative and 17 (8.9%) tested positive. This indicates that 192 out of 205 (93.7%) of the COBAS inconclusive samples were resolved. In this study, we demonstrate the utility of using a unique, ORF-1a based SARS-CoV-2 detection assay in resolving inconclusive results obtained from a conventional manual assay as well for those obtained from a high-throughput testing platform. Real time PCR has been established as a gold standard for detecting SARS-CoV-2 infection. The whole genome sequencing of SARS-CoV-2 in a very large number, and availability of free databases (including, NCBI, GISAID) for accessing the genomes have attributed to development of multitude of RT PCR based kits which can often provide conflicting and inconclusive results (Fang et al., 2020) . Thus, a testing strategy that would resolve these issues would greatly enhance efficiency of diagnosis which in tun would significantly impact transmission dynamics and allow efficient epidemiological surveillance. Also, the rapidly accumulating mutations in SARS-CoV-2 genome pose a challenge for accurately diagnosing the infection due to possible mispriming in assays that rely on detection of viral sequences in these regions (Rambaut et al., 2020) . Based on hypervariable sequence analysis as well as mutation hotspot enumeration we designed unique primers capable of differentiating infection with SARS-CoV-2, SARS-CoV and MERS-CoV. The hypervariability was observed in the regions (1933-3956) of ORF1a and our primer/probe set spanned within the nsp3 region. This design strategy was implemented to develop an in-house RT-PCR based assay for detection of SARS-CoV-2. Our unique primer and probe design were subjected to comparative analysis with 1) WHO recommended and EUA (USFDA) approved SD Biosensor kits, as well as with 2) the high throughput, automated SARS-CoV-2 detection assay on the COBAS 6800 platform. Overall high concordance was observed for our inhouse assay with both these detection modalities. Viroselect assay was able to resolve 100% of the inconclusive results obtained by the SD Biosensor kit. Notably, 7 out of 19 (36.8%) of these samples were resolved to be positive by our assay, while 6 out of 7 were resolved to be positive by another EUA (USFDA) approved . CC-BY-NC-ND 4.0 International license It is made available under a perpetuity. is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101/2021.02.11.21251605 doi: medRxiv preprint kit, LabGun. Additionally, when corroborated clinically, 6 out of 7 inconclusive samples tested positive by Viroselect were documented to have been obtained from symptomatic individuals. A precise and early diagnosis and treatment is crucial in COVID-19 (Rong et al., 2020) . Highthroughput diagnostic platforms, such as the COBAS 6800 are critical in addressing diagnostic demand during fast moving epidemics such as COVID-19 and have a direct impact on curtailing transmission as well as clinical management. Considering the similarity in geography, disease prevalence, population dynamics and healthcare spending of all the countries in South Asia, Ministry of Health and Family Welfare, Government of India adopted commendable measures to tackle the COVID-19 pandemic. A major such measure was increased accessibility to high throughput testing facilities. Our laboratory was one of these centres where we have tested close to 100,000 samples to date from Mumbai and surrounding areas. When dealing with such high throughput, a major challenge encountered was the rate of inconclusives. Although the rate was relatively low at 3%, the absolute number translated into approximately 3000 individuals (for every 100,000 individuals). Considering rapid transmission dynamics of SARS-CoV-2, even a day's delay in correctly diagnosing and reporting a false negative or inconclusive sample as positive would result in significant impact on disease transmission in a highly populated and resource setting such as India (Kretzschmar et al., 2020; Larremore et al., 2021; Rong et al., 2020) . When Viroselect was used to interrogate a subset of inconclusive samples obtained from our COBAS 6800 platform we found that our assay was able to successfully resolve ~94% of these samples. Most importantly, ~ 9% of these inconclusives were resolved to be positive. Our assay would thus enable optimal intervention in managing these cases, especially if they are assumed to be potential transmitters. The authors declare that they have no competing interests. is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101 https://doi.org/10. /2021 Research in Reproductive Health (ICMR-NIRRH). The funding body had no role in the design of the study, collection, analysis, and interpretation of data or in writing the manuscript. This study was approved by Institutional Ethics Committee at ICMR-NIRRH (Project No. is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101/2021.02.11.21251605 doi: medRxiv preprint . CC-BY-NC-ND 4.0 International license It is made available under a perpetuity. is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101/2021.02.11.21251605 doi: medRxiv preprint . CC-BY-NC-ND 4.0 International license It is made available under a perpetuity. is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101/2021.02.11.21251605 doi: medRxiv preprint Figure 1a : Depiction of the Hypervariable region between the genomes of SARS-CoV-2, is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101 https://doi.org/10. /2021 is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101 https://doi.org/10. /2021 is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101 https://doi.org/10. /2021 is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101/2021.02.11.21251605 doi: medRxiv preprint TABLES LEGEND Table 1 : Primer sequences for SARS-CoV-2 detection (RT-PCR). Homology of ORF1a (nsp3) RT-PCR primers and Probe with Human Genome sprovided using nBLAST ,highly similar sequences (megablast). is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101/2021.02.11.21251605 doi: medRxiv preprint is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10.1101/2021.02.11.21251605 doi: medRxiv preprint is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprint The copyright holder for this this version posted February 13, 2021. ; https://doi.org/10. 1101 The Laboratory Diagnosis of Coronavirus Disease 2019-Frequently Asked Questions Strategic planning to augment the testing capacity for COVID-19 in India Evaluation of Four Commercial Kits for SARS-CoV-2 Real-Time Reverse-Transcription Polymerase Chain Reaction Approved by Emergency-Use-Authorization in Korea Delhi: Indian Council Of Medical Research Impact of delays on effectiveness of contact tracing strategies for COVID-19: a modelling study Test sensitivity is secondary to frequency and turnaround time for COVID-19 screening Clinical Evaluation of the cobas SARS-CoV-2 Test and a Diagnostic Platform Switch during 48 Hours in the Midst of the COVID-19 Pandemic Comparison of SARS-CoV-2 detection from nasopharyngeal swab samples by the Roche cobas 6800 SARS-CoV-2 test and a laboratory-developed real-time RT-PCR test Preliminary genomic characterisation of an emergent SARS-CoV-2 lineage in the UK defined by a novel set of spike mutations Effect of delay in diagnosis on transmission of COVID-19 COVID-19) dashboard. Geneva: World Health Organization How India scaled up its laboratory testing capacity for COVID-19. Geneva: World Health Organization The deadly coronaviruses: The 2003 SARS pandemic and the 2020 novel coronavirus epidemic in China ☒ The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.☐The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:. CC-BY-NC-ND 4.0 International license It is made available under a perpetuity.is the author/funder, who has granted medRxiv a license to display the preprint in (which was not certified by peer review) preprintThe copyright holder for this this version posted February 13, 2021. ; https://doi.org/10. 1101