key: cord-0693361-vfg0jo8r
authors: Loke, Mun Fai; Yadav, Indresh; Lim, Teck Kwang; van der Maarel, Johan R. C.; Sham, Lok-To; Chow, Vincent T.
title: SARS-CoV-2 Spike Protein and Mouse Coronavirus Inhibit Biofilm Formation by Streptococcus pneumoniae and Staphylococcus aureus
date: 2022-03-18
journal: Int J Mol Sci
DOI: 10.3390/ijms23063291
sha: ff63f176fa10dd72ea6d6cc87bfc1187c1c10408
doc_id: 693361
cord_uid: vfg0jo8r

The presence of co-infections or superinfections with bacterial pathogens in COVID-19 patients is associated with poor outcomes, including increased morbidity and mortality. We hypothesized that SARS-CoV-2 and its components interact with the biofilms generated by commensal bacteria, which may contribute to co-infections. This study employed crystal violet staining and particle-tracking microrheology to characterize the formation of biofilms by Streptococcus pneumoniae and Staphylococcus aureus that commonly cause secondary bacterial pneumonia. Microrheology analyses suggested that these biofilms were inhomogeneous soft solids, consistent with their dynamic characteristics. Biofilm formation by both bacteria was significantly inhibited by co-incubation with recombinant SARS-CoV-2 spike S1 subunit and both S1 + S2 subunits, but not with S2 extracellular domain nor nucleocapsid protein. Addition of spike S1 and S2 antibodies to spike protein could partially restore bacterial biofilm production. Furthermore, biofilm formation in vitro was also compromised by live murine hepatitis virus, a related beta-coronavirus. Supporting data from LC-MS-based proteomics of spike–biofilm interactions revealed differential expression of proteins involved in quorum sensing and biofilm maturation, such as the AI-2E family transporter and LuxS, a key enzyme for AI-2 biosynthesis. Our findings suggest that these opportunistic pathogens may egress from biofilms to resume a more virulent planktonic lifestyle during coronavirus infections. The dispersion of pathogens from biofilms may culminate in potentially severe secondary infections with poor prognosis. Further detailed investigations are warranted to establish bacterial biofilms as risk factors for secondary pneumonia in COVID-19 patients.

Among COVID-19 patients, the prevalence of co-infection varies in different studies [1] . Well-recognized co-pathogens include bacteria (e.g., Streptococcus pneumoniae or S. pneumoniae, and Staphylococcus aureus, or S. aureus); fungi (Candida and Aspergillus species), and viruses (e.g., influenza and rhinovirus). Notably, in a retrospective multi-center cohort study involving 191 adult in-patients with laboratory-confirmed COVID-19 from Wuhan (China), half of non-survivors (27/54) suffered from secondary infections [2] . In contrast, only one out of 137 survivors (<1%) experienced secondary infection. In another study of patients with COVID-19 pneumonia, nearly half (25/53) of them had additional infection with Mycoplasma pneumoniae [3] . One large study of hospitalized COVID-19 patients

To model bacterial biofilm formation in vitro by two Gram-positive bacteria (S. pneumoniae and S. aureus) that commonly cause pneumonia, six S. pneumoniae and three S. aureus strains (Table 1) were initially screened on 96-well plates using a crystal violet assay.

Both S. pneumoniae 19F and S. aureus A10 strains formed biofilm when cultured in brain heart infusion (BHI) broth and nutrient broth, respectively. The presence of 0.2% glucose enhanced biofilm formation. Biofilm-forming capability of S. pneumoniae 19F and S. aureus A10 depended upon the initial bacterial density (Figure 1 ). S. pneumoniae formed biofilm optimally at a lower initial bacterial load of 3.0 × 10 6 colony-forming units per mL (CFU/mL), but did not form biofilm at higher initial load of 3.0 × 10 7 CFU/mL (S. pneumoniae biofilm was reduced by 56.7% when compared to load of 3.0 × 10 6 CFU/mL).

In contrast, S. aureus formed more biofilm when initial bacterial load increased from 3.0 × 10 6 CFU/mL to 3.0 × 10 7 CFU/mL (biofilm formation was 160% higher). Thus, subsequent experiments were performed using initial bacterial loads of 3.0 × 10 6 CFU/mL for S. pneumoniae and 3.0 × 10 7 CFU/mL for S. aureus in their respective media supplemented with 0.2% glucose. Both S. pneumoniae 19F and S. aureus A10 strains formed biofilm when cultured in brain heart infusion (BHI) broth and nutrient broth, respectively. The presence of 0.2% glucose enhanced biofilm formation. Biofilm-forming capability of S. pneumoniae 19F and S. aureus A10 depended upon the initial bacterial density (Figure 1 ). S. pneumoniae formed biofilm optimally at a lower initial bacterial load of 3.0 × 10 6 colony-forming units per mL (CFU/mL), but did not form biofilm at higher initial load of 3.0 × 10 7 CFU/mL (S. pneumoniae biofilm was reduced by 56.7% when compared to load of 3.0 × 10 6 CFU/mL). In contrast, S. aureus formed more biofilm when initial bacterial load increased from 3.0 × 10 6 CFU/mL to 3.0 × 10 7 CFU/mL (biofilm formation was 160% higher). Thus, subsequent experiments were performed using initial bacterial loads of 3.0 × 10 6 CFU/mL for S. pneumoniae and 3.0 × 10 7 CFU/mL for S. aureus in their respective media supplemented with 0.2% glucose. Effect of initial bacterial cell density on biofilm production by S. pneumoniae 19F and S. aureus A10 strains using the crystal violet assay. Each result was derived from three independent experiments or biological replicates (with each assay performed as technical triplicates). Each small gray datapoint represents the average or mean of technical triplicates, while each blue datapoint depicts the mean of three independent experiments. Intervals represent 95% confidence interval (CI) for the mean. p-value < 0.05 was considered statistically significant by the independent samples Mann-Whitney U test. Effect of initial bacterial cell density on biofilm production by S. pneumoniae 19F and S. aureus A10 strains using the crystal violet assay. Each result was derived from three independent experiments or biological replicates (with each assay performed as technical triplicates). Each small gray datapoint represents the average or mean of technical triplicates, while each blue datapoint depicts the mean of three independent experiments. Intervals represent 95% confidence interval (CI) for the mean. p-value < 0.05 was considered statistically significant by the independent samples Mann-Whitney U test.

To investigate the effects of the SARS-CoV-2 spike (S) protein on bacterial biofilm formation, recombinant S1 subunit, S2 extracellular domain (ECD), and both S1 + S2 subunits were tested on S. pneumoniae and S. aureus. Another abundant SARS-CoV-2 structural protein, i.e., recombinant nucleocapsid protein (NP) was also investigated to serve as a comparative and reference control.

When incubated in the presence of 10 pmol/mL of recombinant S1 + S2 subunits at 37 • C for 18 h, the mean S. pneumoniae biofilm formation was very significantly diminished when compared to control (p < 0.001), and was reduced by 61.0% (p < 0.001) when compared to incubation with NP ( Figure 2a ). When incubated with the S1 subunit alone, S. pneumoniae biofilm was reduced by 35.4% when compared to NP, but this reduction was not statistically significant (p ≥ 0.05). However, mean S. pneumoniae biofilm formation when incubated with S2 ECD alone was also not significantly different from the NP-treated control.

formation, recombinant S1 subunit, S2 extracellular domain (ECD), and both S1 + S2 subunits were tested on S. pneumoniae and S. aureus. Another abundant SARS-CoV-2 structural protein, i.e., recombinant nucleocapsid protein (NP) was also investigated to serve as a comparative and reference control.

When incubated in the presence of 10 pmol/mL of recombinant S1 + S2 subunits at 37 °C for 18 h, the mean S. pneumoniae biofilm formation was very significantly diminished when compared to control (p < 0.001), and was reduced by 61.0% (p < 0.001) when compared to incubation with NP ( Figure 2a ). When incubated with the S1 subunit alone, S. pneumoniae biofilm was reduced by 35.4% when compared to NP, but this reduction was not statistically significant (p ≥ 0.05). However, mean S. pneumoniae biofilm formation when incubated with S2 ECD alone was also not significantly different from the NPtreated control.

The mean S. aureus biofilm formation decreased by 46.8% (p = 0.005) in the presence of 10 pmol/mL of both S1 + S2 subunits, and by 54.8% (p = 0.003) with S1 subunit alone when compared to incubation with NP ( Figure 2b ). In contrast, mean S. aureus biofilm formation when incubated with S2 ECD did not exhibit a statistically significant difference when compared to NP (p ≥ 0.05). strains, when co-incubated with recombinant SARS-CoV-2 spike S1 subunit, S2 ECD, S1 + S2 subunits, and nucleocapsid protein (NP) using the crystal violet assay. Each result was derived from three independent experiments or biological replicates (with each assay performed as technical triplicates). Each small gray datapoint represents the average or mean of technical triplicates, while each blue datapoint depicts the mean of three independent experiments. Intervals represent 95% CI for the mean. p-value < 0.05 was considered statistically significant by one-way ANOVA with Dunnett's T3 post-hoc test.

To further demonstrate the effect of live coronavirus on bacterial biofilm formation, murine coronavirus (MHV strain A59) propagated in H2.35 murine liver cells was used as a surrogate for SARS-CoV-2. To study biofilm formation, S. pneumoniae and S. aureus were incubated respectively with 2.0-4.0 × 10 4 plaque-forming units (PFU/mL) and 2.0- Figure 2 . Characterization of biofilm production by (a) S. pneumoniae 19F and (b) S. aureus A10 strains, when co-incubated with recombinant SARS-CoV-2 spike S1 subunit, S2 ECD, S1 + S2 subunits, and nucleocapsid protein (NP) using the crystal violet assay. Each result was derived from three independent experiments or biological replicates (with each assay performed as technical triplicates). Each small gray datapoint represents the average or mean of technical triplicates, while each blue datapoint depicts the mean of three independent experiments. Intervals represent 95% CI for the mean. p-value < 0.05 was considered statistically significant by one-way ANOVA with Dunnett's T3 post-hoc test.

The mean S. aureus biofilm formation decreased by 46.8% (p = 0.005) in the presence of 10 pmol/mL of both S1 + S2 subunits, and by 54.8% (p = 0.003) with S1 subunit alone when compared to incubation with NP ( Figure 2b ). In contrast, mean S. aureus biofilm formation when incubated with S2 ECD did not exhibit a statistically significant difference when compared to NP (p ≥ 0.05).

To further demonstrate the effect of live coronavirus on bacterial biofilm formation, murine coronavirus (MHV strain A59) propagated in H2.35 murine liver cells was used as a surrogate for SARS-CoV-2. To study biofilm formation, S. pneumoniae and S. aureus were incubated respectively with 2.0-4.0 × 10 4 plaque-forming units (PFU/mL) and 2.0-4.0 × 10 5 PFU/mL of MHV. When compared to control, S. pneumoniae biofilm was reduced by 47.0% (p < 0.001), and S. aureus biofilm decreased by 67.0% (p < 0.001) in the presence of viable MHV ( . Characterization of biofilm production by S. pneumoniae 19F and S. aureus A10 strains when co-incubated with murine hepatitis virus (MHV) or cell-free culture supernatant (control) using the crystal violet assay. Each result was derived from three independent experiments or biological replicates (with each assay performed as technical triplicates). Each small gray datapoint represents the average or mean of technical triplicates, while each blue datapoint depicts the mean of three independent experiments. Intervals represent 95% CI for the mean. p-value < 0.05 was considered statistically significant by one-way ANOVA with Dunnett's T3 post-hoc test.

The above experiments were carried out using conventional crystal violet assays for semi-quantitative measurements of biofilm formation. However, crystal violet staining does not provide information on the differences between physical and chemical properties of biofilms of different bacteria. Thus, we harnessed particle-tracking microrheology to investigate the viscoelasticity of S. pneumoniae and S. aureus biofilms. This technique allows measurement of the viscoelastic response in localized regions of the sample, thereby characterizing the heterogeneity within the bacterial biofilm. Formation of a solid-like gel can be easily recognized by the plateauing bead mean square displacement 〈Δ 2 ( )〉 at long lag-times t.

From the trajectories of the colloidal beads, the probability distributions for displacements in the x-and y-directions were determined for a range of lag-times t. Gaussians were fitted to the probability distributions by optimizing 〈Δ 2 ( )〉. The widths of the distributions obtained in the orthogonal x-and y-directions were averaged. Accordingly, 〈Δ 2 ( )〉 refers to the mean square displacement in one dimension. The time-dependent creep compliance of the biofilm can then be derived according to: ( ) = 3 〈Δ 2 ( )〉/ Figure 3 . Characterization of biofilm production by S. pneumoniae 19F and S. aureus A10 strains when co-incubated with murine hepatitis virus (MHV) or cell-free culture supernatant (control) using the crystal violet assay. Each result was derived from three independent experiments or biological replicates (with each assay performed as technical triplicates). Each small gray datapoint represents the average or mean of technical triplicates, while each blue datapoint depicts the mean of three independent experiments. Intervals represent 95% CI for the mean. p-value < 0.05 was considered statistically significant by one-way ANOVA with Dunnett's T3 post-hoc test.

The above experiments were carried out using conventional crystal violet assays for semi-quantitative measurements of biofilm formation. However, crystal violet staining does not provide information on the differences between physical and chemical properties of biofilms of different bacteria. Thus, we harnessed particle-tracking microrheology to investigate the viscoelasticity of S. pneumoniae and S. aureus biofilms. This technique allows measurement of the viscoelastic response in localized regions of the sample, thereby characterizing the heterogeneity within the bacterial biofilm. Formation of a solid-like gel can be easily recognized by the plateauing bead mean square displacement ∆x 2 (t) at long lag-times t.

From the trajectories of the colloidal beads, the probability distributions for displacements in the xand y-directions were determined for a range of lag-times t. Gaussians were fitted to the probability distributions by optimizing ∆x 2 (t) . The widths of the distributions obtained in the orthogonal xand y-directions were averaged. Accordingly, ∆x 2 (t) refers to the mean square displacement in one dimension. The time-dependent creep compliance of the biofilm can then be derived according to: J(t) = 3πa ∆x 2 (t) /kT (with kT being thermal energy, and a the radius of the bead). Figure 4a ,c show J(t) at randomly selected locations within the S. pneumoniae and S. aureus biofilms, respectively. The temporal behavior of J(t) shows that it initially increases and subsequently approaches a plateau at a constant value with increasing lag-time. Furthermore, J(t) depends on the location of the monitored bead inside the sample. For all but one location, the plateau value was not reached within the window of observation. We have verified that the variation of the creep compliance over location within the biofilm is not related to variation in the bead diameter, but to inhomogeneity in the viscoelastic response.

with no-slip boundary conditions, and that the Stokes drag can be extended over all frequencies [19] . Figure 4b ,d present the viscoelastic moduli as a function of frequency, corresponding to the locations in the biofilm with the highest and lowest creep compliances in Figure 4a ,c. The moduli pertaining to the other probed locations lie between these two extremes.

The variation of ′ and " across the biofilm is a signature of its mechanical inhomogeneity. For the location with the lowest creep compliance, the low frequency limit of ′ is almost constant and corresponds with 1/ ( → ∞). Its viscoelastic behavior at the relevant time scale (<1 s) is close to that of an elastic solid. For the other locations, a constant low frequency limiting value of ′ was not observed, which is most likely due to the limited window of observation, with a maximum lag time of 1 s. The value of ′ at the lowest frequency (1 Hz) varies across the biofilm over an order of magnitude in the range 0.2 to 2.5 Pa. The relaxation time of the biofilm can be derived from the crossover frequency of ′ and ", that is, c = 1/ . Again, for some locations, c falls outside our window of observation, but it varies in the range 5 to 30 ms, with the shorter relaxation times pertaining to (stiffer) locations with a higher elasticity modulus. The results for the S. aureus biofilm are close to those of S. pneumoniae biofilm.

Overall, the rheological results indicate that S. pneumoniae and S. aureus biofilms are elastic and solid-like, with mechanical inhomogeneity related to variations in density of the cross-linking units of their biopolymers (e.g., exopolysaccharides, extracellular DNA, and proteins). The viscoelastic response of the biofilm is more conveniently discussed in terms of the elastic storage and viscous loss moduli, G and G , respectively. Following the previously described procedure, we have obtained the moduli from the one-sided, complex Fourier transformation of the creep compliance and the generalized Stokes-Einstein equation [18] . This approach requires that the fluid be treated as an incompressible continuum, with noslip boundary conditions, and that the Stokes drag can be extended over all frequencies [19] . Figure 4b ,d present the viscoelastic moduli as a function of frequency, corresponding to the locations in the biofilm with the highest and lowest creep compliances in Figure 4a ,c. The moduli pertaining to the other probed locations lie between these two extremes.

The variation of G and G across the biofilm is a signature of its mechanical inhomogeneity. For the location with the lowest creep compliance, the low frequency limit of G is almost constant and corresponds with 1/J(t → ∞). Its viscoelastic behavior at the relevant time scale (<1 s) is close to that of an elastic solid. For the other locations, a constant low frequency limiting value of G was not observed, which is most likely due to the limited window of observation, with a maximum lag time of 1 s. The value of G at the lowest frequency (1 Hz) varies across the biofilm over an order of magnitude in the range 0.2 to 2.5 Pa. The relaxation time τ of the biofilm can be derived from the cross-over frequency of G and G , that is, ω c =1/τ. Again, for some locations, ω c falls outside our window of observation, but it varies in the range 5 to 30 ms, with the shorter relaxation times pertaining to (stiffer) locations with a higher elasticity modulus. The results for the S. aureus biofilm are close to those of S. pneumoniae biofilm.

Overall, the rheological results indicate that S. pneumoniae and S. aureus biofilms are elastic and solid-like, with mechanical inhomogeneity related to variations in density of the cross-linking units of their biopolymers (e.g., exopolysaccharides, extracellular DNA, and proteins).

To further demonstrate that the SARS-CoV-2 spike protein and its subunits were directly or indirectly responsible for the inhibition of bacterial biofilm formation, experiments were performed by co-incubating antibodies to the S1 subunit and to the S2 ECD. Biofilm formation was partially restored in an antibody concentration-dependent manner ( Figure 5 ). Co-incubation of S1 + S2 subunits together with antibodies at 1:10,000 dilution could rescue S. pneumoniae biofilm formation by 17.9% (p = 0.012). When the concentrations of antibodies were increased to 1:1000 dilution, S. pneumoniae biofilm was further restored by 32.3% (p < 0.001).

Western blot experiments revealed that SARS-CoV-2 spike protein (i.e., S1 + S2 subunits) was bound to S. pneumoniae, and could be detected by antibodies against spike S1 subunit and S2 ECD ( Figure 6 ). In this experiment, bacteria were incubated with S1 + S2 subunits (10 pmol/mL) in 96-well plates for 18 h at 37 • C in an atmosphere of 5% CO 2 . Prior to Western blotting, planktonic and biofilm bacteria were collected and washed with sterile PBS to remove unbound spike protein.

To further investigate the molecular basis of virus-bacteria interactions between the SARS-CoV-2 spike protein or MHV with S. pneumoniae or S. aureus, untargeted liquid chromatography-mass spectrometry (LC-MS) analysis was performed. A total of 863 proteins were annotated for the resultant dataset of interactions between S. pneumoniae and coronavirus (Supplementary File S1). Among these, 731 proteins were annotated for the S. pneumoniae control: 687 proteins for S. pneumoniae with S1 subunit; 700 proteins for S. pneumoniae with S2 ECD; 721 proteins for S. pneumoniae with S1 + S2 subunits; 690 proteins for S. pneumoniae with MHV. Notably, 87 proteins were differentially annotated for S. pneumoniae control: 32 proteins for S1 subunit (including S1 spike protein); 37 proteins for S2 ECD (including S2 spike protein); 36 proteins for S1 + S2 subunits (including S1 and S2 spike proteins); 79 proteins for MHV (inclusive of spike and nucleocapsid proteins). Proteins of interest are presented in Tables 2 and 3. In total, 950 proteins were annotated for the dataset of interactions between S. aureus and coronavirus. Among these, 820 proteins were annotated for the S. aureus control: 772 proteins for S. aureus with S1; 813 proteins for S. aureus with S2; 791 proteins for S. aureus with S1 + S2 subunits; 646 proteins for S. aureus with MHV. Notably, 121 proteins were differentially annotated for S. aureus control: 51 proteins for S1 (including S1 spike protein); 60 proteins for S2 (including S2 spike protein); 53 proteins for S1 + S2 subunits (including S1 and S2 spike proteins); 33 proteins for MHV. Proteins of interest are presented in Tables 2 and 3. pair) and lowest (top pair) ( ), respectively.

To further demonstrate that the SARS-CoV-2 spike protein and its subunits were di rectly or indirectly responsible for the inhibition of bacterial biofilm formation, experi ments were performed by co-incubating antibodies to the S1 subunit and to the S2 ECD Biofilm formation was partially restored in an antibody concentration-dependent manne ( Figure 5 ). Co-incubation of S1 + S2 subunits together with antibodies at 1:10,000 dilution could rescue S. pneumoniae biofilm formation by 17.9% (p = 0.012). When the concentra tions of antibodies were increased to 1:1000 dilution, S. pneumoniae biofilm was furthe restored by 32.3% (p < 0.001).

Effect of co-incubating SARS-CoV-2 spike S1 and S2 antibodies with spike S1 + S2 protei on biofilm production by S. pneumoniae 19F assessed by the crystal violet assay. The dilutions o both anti-S1 and anti-S2 antibodies used are denoted as 1:10,000 and 1:1000. Spike antibodies (Ab were co-incubated with SARS-CoV-2 recombinant spike S1 + S2 subunits (10 pmol) for 1 h. Bacteri were then added, and further co-incubated for 18 h for biofilm formation. In the control, no spik antibodies nor proteins were co-incubated with bacteria. Co-incubations of spike antibodies onl with bacteria were also tested as controls. Each result was derived from three independent experi ments or biological replicates (with each assay performed as technical triplicates). Each small gra datapoint represents the average or mean of technical triplicates, while each blue datapoint depict the mean of three independent experiments. Intervals represent 95% CI for the mean. p-value < 0.0 was taken as statistically significant by one-way ANOVA with Dunnett's T3 post-hoc test.

Western blot experiments revealed that SARS-CoV-2 spike protein (i.e., S1 + S2 sub units) was bound to S. pneumoniae, and could be detected by antibodies against spike S subunit and S2 ECD ( Figure 6 ). In this experiment, bacteria were incubated with S1 + S subunits (10 pmol/mL) in 96-well plates for 18 h at 37 °C in an atmosphere of 5% CO2 Prior to Western blotting, planktonic and biofilm bacteria were collected and washed with sterile PBS to remove unbound spike protein. Figure 5 . Effect of co-incubating SARS-CoV-2 spike S1 and S2 antibodies with spike S1 + S2 protein on biofilm production by S. pneumoniae 19F assessed by the crystal violet assay. The dilutions of both anti-S1 and anti-S2 antibodies used are denoted as 1:10,000 and 1:1000. Spike antibodies (Ab) were co-incubated with SARS-CoV-2 recombinant spike S1 + S2 subunits (10 pmol) for 1 h. Bacteria were then added, and further co-incubated for 18 h for biofilm formation. In the control, no spike antibodies nor proteins were co-incubated with bacteria. Co-incubations of spike antibodies only with bacteria were also tested as controls. Each result was derived from three independent experiments or biological replicates (with each assay performed as technical triplicates). Each small gray datapoint represents the average or mean of technical triplicates, while each blue datapoint depicts the mean of three independent experiments. Intervals represent 95% CI for the mean. p-value < 0.05 was taken as statistically significant by one-way ANOVA with Dunnett's T3 post-hoc test.

23, x FOR PEER REVIEW 9 of 20 Figure 6 . Western blot detection of recombinant SARS-CoV-2 spike S1 + S2 subunits bound to S. pneumoniae biofilm (using whole bacterial cell lysate). The blots were individually probed with spike S1 and S2 antibodies. The predicted molecular masses of recombinant spike S1, S2 ECD, and S1 + S2 proteins are 76, 59, and 134 kDa, respectively. Lane 1: Control of S. pneumoniae only; lane 2: S. pneumoniae incubated with S1 + S2 subunits. The results of biological duplicate experiments are shown.

To further investigate the molecular basis of virus-bacteria interactions between the SARS-CoV-2 spike protein or MHV with S. pneumoniae or S. aureus, untargeted liquid chromatography-mass spectrometry (LC-MS) analysis was performed. A total of 863 proteins were annotated for the resultant dataset of interactions between S. pneumoniae and coronavirus (Supplementary File S1). Among these, 731 proteins were annotated for the S. pneumoniae control: 687 proteins for S. pneumoniae with S1 subunit; 700 proteins for S. Figure 6 . Western blot detection of recombinant SARS-CoV-2 spike S1 + S2 subunits bound to S. pneumoniae biofilm (using whole bacterial cell lysate). The blots were individually probed with spike S1 and S2 antibodies. The predicted molecular masses of recombinant spike S1, S2 ECD, and S1 + S2 proteins are 76, 59, and 134 kDa, respectively. Lane 1: Control of S. pneumoniae only; lane 2: S. pneumoniae incubated with S1 + S2 subunits. The results of biological duplicate experiments are shown. 

Protein/Gene Control S1 S2 S1 + S2 MHV Control S1 S2 S1 + S2 MHV Table 3 . Differentially expressed proteins with their indicated fold change relative to the bacterial control. The fold change of each annotated protein was calculated based on protein content (percentage) estimated from the exponentially modified protein abundance index (emPAI).

Protein/Gene S1 S2 S1 + S2 MHV S1 S2 S1 + S2 MHV 

Numerous studies indicate that pneumococcal infection is associated with preceding or concomitant virus infections, and that virus infections enhance bacterial growth or dissociation from nasopharyngeal tissue [20] . Influenza A virus (IAV) is associated with greater susceptibility to pneumococcal pneumonia [21] [22] [23] . Furthermore, IAV infection is linked with increased pneumococcal spread between infant mice, suggesting a role for IAV in the release of S. pneumoniae from biofilm and its subsequent transmission [24] . The impact of virus infection on pneumococcal biofilm integrity was demonstrated using a static biofilm model with live cultures of human respiratory epithelial cells that survived with biofilm bacteria. In addition, IAV infection of mice could cause active egress of S. pneumoniae from biofilms, and the dispersed bacteria could disseminate in the host to otherwise sterile sites [25] . Similarly, S. aureus biofilms grown on the upper respiratory epithelial substratum can disperse in response to host physiologic changes related to viral infection. Mice colonized with S. aureus and subsequently exposed to these physiological stimuli or IAV co-infection can develop pronounced pneumonia [26] .

The SARS-CoV-2 spike protein is essential for the induction of neutralizing antibody and T-cell responses [27, 28] . Importantly, the spike protein is the major target antigen of vaccines against COVID-19, as well as the main site for mutations in SARS-CoV-2 variants, including Omicron [29, 30] . Spike expression in human pro-monocytic cells can also dysregulate expression of host genes associated with virus receptor activity, heat shock protein binding, endoplasmic reticulum stress, antigen processing, and presentation [31] . The heavily glycosylated trimeric spike protein consists of two subunits-the S1 subunit contains a receptor-binding domain (RBD) that binds to the host cell receptor (angiotensin-converting enzyme 2 or ACE2), while the S2 subunit mediates fusion between the viral and host cell membranes [32] . During viral infection, the S protein is cleaved by protease into the S1 and S2 subunits. The S1 subunit can induce TLR4 signaling and activate glycolytic metabolism, associated with production of pro-inflammatory cytokines in monocytes/macrophages [33, 34] . The pro-inflammatory responses induced by the S1 subunit can contribute to COVID-19-like acute lung injury in K18-hACE2 transgenic mice and barrier dysfunction in human endothelial cells [35] .

The surface S1 subunit is organized into four domains: an N-terminal domain (NTD), a C-terminal domain (RBD), and two subdomains (SD1 and SD2). The transmembrane S2 subunit contains an N-terminal hydrophobic fusion peptide (FP), two heptad repeats (HR1 and HR2), a transmembrane domain (TM), and a cytoplasmic tail (CT) [36] . Interestingly, both the S1 subunit and S1 + S2 subunits (representing the full-length spike protein) inhibited bacterial biofilm formation-thus indicating that S1 was mainly responsible for this inhibition. In the present study, we demonstrated that murine coronavirus and SARS-CoV-2 spike protein, particularly its S1 subunit, could inhibit or disperse biofilms of both S. pneumoniae and S. aureus (Figures 2 and 3) .

The detection of the SARS-CoV-2 spike protein after bacterial co-incubation ( Figure 6 ) suggests that the interaction between spike protein and S. pneumoniae likely involved direct adhesion of the S1 subunit to bacterial surface molecule(s). Antibody concentrationdependent restoration of the biofilm-forming capability of S. pneumoniae using targetspecific antibodies ( Figure 5 ) confirmed that the spike protein was directly involved in the inhibition or dispersion of S. pneumoniae biofilm. Future studies should focus on the identification and function of S. pneumoniae surface molecule(s) targeted by SARS-CoV-2 spike protein. Infection of cell lines and differentiated primary human airway cells with NL63 human coronavirus can enhance adherence of S. pneumoniae [37] . Thus, it would also be interesting to explore whether SARS-CoV-2 infection or its spike protein can influence pneumococcal adherence to host cells.

Bacterial co-infections and secondary infections occur in COVID-19 patients at an overall proportion of about 7%, and are more common among critically ill patients (8%) [38, 39] . S. pneumoniae and S. aureus (including methicillin-resistant S. aureus) represent common Gram-positive pathogens that cause such co-infections [40] [41] [42] [43] . However, it is noteworthy that COVID-19 patients can also be co-infected with Gram-negative bacteria such as Klebsiella pneumoniae, Pseudomonas aeruginosa, Escherichia coli, and Acinetobacter baumannii (including antibiotic-resistant strains) [40] [41] [42] [43] [44] . Furthermore, SARS-CoV-2 spike protein can bind to lipopolysaccharide (LPS), modulate LPS aggregation, and boost proinflammatory activity, culminating in excessive inflammation [45] . Hence, it would be interesting to investigate the interactions between SARS-CoV-2 spike proteins and Gramnegative bacterial biofilms.

The biofilms of S. pneumoniae and S. aureus are either true elastic soft solids with a yield stress value, or viscoelastic liquids with a finite viscosity. Our microrheology experiments indicate that they are soft solids because: (a) the creep compliance plateaus at a constant value for lag times of around 1 s, and (b) the elastic modulus levels off at a constant value at low frequencies ( Figure 4 ). If the film is a viscoelastic fluid, its relaxation time would be very long, exceeding tens of seconds. The elasticity modulus and relaxation time vary across the biofilms over an order of magnitude, but remain in the order of 1 Pa and 10 ms, respectively. This variation in viscoelastic response is presumably related to inhomogeneity in the density of the cross-linking extracellular biopolymer units, or local segregation (i.e., localized macroscopic inhomogeneity in mass density). The inhomogeneous nature of the samples in this study is consistent with the dynamic characteristics of biofilm development. The viscoelastic responses of the biofilms are close to those for an inhomogeneous soft solid formed by DNA and a nucleoid-associated protein, which indicates a similarity in biomolecular composition [46] . Hart et al. [47] demonstrated that during the initial stages of S. aureus biofilm development, column-like structures with a gradient of viscoelasticity are established and modulated by the hydrodynamic shear caused by fluid flow in the environment. In this study, we have demonstrated that particle tracking microrheology can be harnessed to investigate the physical and chemical characteristics of biofilm. Future investigations should focus on the viscoelastic properties of biofilms formed by these bacteria with and without interaction with different spike protein subunits or coronaviruses.

The observed inhibition or dispersion of S. pneumoniae and S. aureus biofilms was corroborated at the molecular level by untargeted LC-MS-based proteomics (Tables 2 and 3) . Notably, proteins involved in quorum sensing and biofilm formation were upregulated by interaction of the bacteria with SARS-CoV-2 spike protein and MHV. S-ribosylhomocysteine lyase (luxS) was upregulated for virus interactions with both S. aureus and S. pneumoniae. AI-2E family transporter (yhhT_1) was also differentially expressed in spike-and MHVtreated S. pneumoniae, but not in the control. For biofilm formation, bacteria regulate gene expression in response to changes in their population density through quorum sensing [48] . Quorum sensing is mediated by secreted molecules known as auto-inducers (AIs), which are metabolic by-products of a luxS gene-encoded synthase. It is documented that S. pneumoniae luxS mutant strain displays low biofilm formation capacity in vitro [49] . Moreover, LuxS plays an important role in S. pneumoniae colonization and persistence in the nasopharynx of mice [50] . A murine model of intranasal pneumococcal challenge revealed that the ability to spread from the nasopharynx to the lungs or blood was compromised in a S. pneumoniae luxS mutant when compared with the wild-type strain [51] . Similarly, S. aureus biofilm formation is triggered by AI-2, whose biosynthesis is mediated by LuxS and methylthioadenosine/S-adenosylhomocysteine nucleosidase (MTAN) [52] . However, it is also observed that luxS knockout in S. epidermidis augments biofilm formation in vitro and enhances virulence in a rat model [53] . These findings indicate that the LuxS quorum-sensing system likely plays key roles in biofilm formation via complex regulatory mechanisms involving many other proteins and molecules [54] .

The cell surface of most Gram-positive bacteria contains wall teichoic acid (TA) and lipoteichoic acid (LTA). D-alanine-D-alanyl carrier protein ligase (dltA) in S. pneumoniae catalyzes the D-alanylation of LTA. Pneumococcal capsule in concert with D-alanylation of LTA contribute to resistance to neutrophil extracellular traps (NETs)-mediated killing in vitro, and promote dissemination to the lungs and bloodstream of mice [55] . Although the role of D-alanylation of LTA in S. pneumoniae biofilm development has not been wellestablished, D-alanyl esters on LTA of Streptococcus gordonii are involved in adhesion and biofilm formation [56] . Furthermore, impaired D-alanylation of LTA abrogates the ability of S. aureus to colonize any surface and to form antibiotic-resistant biofilms [57] .

UDP-N-acetylmuramoyl-L-alanyl-D-glutamate-L-lysine ligase (murE) of S. pneumoniae catalyzes the addition of L-lysine to the nucleotide precursor UDP-N-acetylmuramoyl-Lalanyl-D-glutamate (UMAG) during the biosynthesis of bacterial cell-wall peptidoglycan. Choline-binding-anchored murein hydrolase (lytC) or 1,4-beta-N-acetylmuramidase is a gene encoding one of the three murein hydrolases of S. pneumoniae. Sensor protein CiaH is a sensor histidine kinase of S. pneumoniae. Mutations in murE, lytC, and ciaH of S. pneumoniae impair biofilm formation and nasopharyngeal colonization in mice [58] . In addition, N-acetylneuraminate lyase (nanA), a virulence factor and surface enzyme that interacts with host components, is transcriptionally induced during biofilm growth [59] . Interestingly, pneumococcal adhesin, surface protein A (pspA), was not differentially expressed with spike and MHV treatment of bacteria-implying the involvement of bacterial cell wall components in S. pneumoniae interactions with coronavirus.

The LysR family of transcriptional regulators represents the most abundant type of transcriptional regulator in the prokaryotic kingdom. A putative LysR-type regulator can inhibit biofilm synthesis in Pseudomonas aeruginosa [60] . However, the role of LysR transcriptional regulator (cysB) in S. pneumoniae biofilm formation is unknown.

HTH-type transcriptional regulator MgrA of S. aureus negatively regulates biofilm formation and detachment by repressing the expression of phenol-soluble modulin (PSM) operons [61] . PSMs mediate multiple functions during biofilm development and virulence in staphylococcal pathogenesis.

Mature biofilms are composed of bacteria, extracellular polysaccharide, extracellular DNA (eDNA), and proteins. An important virulence factor of S. aureus is micrococcal nuclease (MN), a thermostable endonuclease that degrades eDNA as a constituent of the biofilm [62] . Biofilm formation and maturation is expected to be intrinsically affected by the production of MN since it cleaves eDNA. SAOUHSC_00818 in S. aureus is predicted to encode a micrococcal nuclease and may affect biofilm maturation.

Although the role of CDP-diacylglycerol-glycerol-3-phosphate 3-phosphatidyltransferase (SAOUHSC_01260) in biofilm formation is unclear, this transmembrane protein catalyzes the committed step to the synthesis of acidic phospholipids, which constitute an important component of the bacterial plasma membrane. The cell wall hydrolase LytN, an autolysin, is probably involved in peptidoglycan hydrolysis. Autolysis is an important process in cell wall turnover in S. aureus-mediated by several peptidoglycan hydrolases (or so-called autolysins) and controlled by many regulators. Alterations in autolysin expression (including lytN) are suggested to enhance biofilm formation in S. aureus rot mutant. The roles of bPH_3 domain-containing protein (SAOUHSC_02568), ribosome maturation factor RimM, and AA_permease domain-containing proteins (SAOUHSC_01803 and SAOUHSC_02590) in S. aureus biofilm formation have not been established.

From the results of this in vitro study, we propose that SARS-CoV-2 and related coronavirus infections may trigger an active dispersion of bacteria from biofilm. It has been documented that biofilm bacteria display lower virulence in vivo when compared to broth-grown bacteria [63, 64] . Dispersed pneumococci are able to colonize the nasopharynx as well as able to disseminate into the lungs and middle ear to a greater extent than planktonic, broth-grown bacteria and biofilm bacteria [25] . The dispersion of opportunistic pathogens from biofilms during bacterial co-infections or superinfections of COVID-19 patients may explain poorer clinical outcomes, including increased mortality. However, the findings of this in vitro study did not consider host physiologic and immunologic factors. Therefore, future experiments using animal models are essential to firmly establish the putative association between SARS-CoV-2 and bacterial biofilms together with their interacting components.

In conclusion, this in vitro study has provided phenotypic and molecular evidence to enhance our understanding of inter-kingdom interactions between viruses and bacteria. This proof-of-concept study suggests an association between SARS-CoV-2 spike protein and the related murine coronavirus, together with biofilm formation of opportunistic bacterial pathogens S. pneumoniae and S. aureus. Further detailed investigations are warranted to establish bacterial biofilms as potential risk factors in the development of secondary bacterial pneumonia in COVID-19 patients.

S. pneumoniae and S. aureus strains initially screened and analyzed in this study are listed in Table 1 .

Recombinant SARS-CoV-2 spike protein S1 subunit (Val16-Arg685) expressed in HEK293 cells with a poly-histidine tag at the C-terminus (40591-V08H), S2 ECD (Ser686-Pro1213) expressed in baculovirus-insect cells with a poly-histidine tag at the C-terminus (40590-V08B), S1 + S2 subunits (Val16-Pro1213) expressed in baculovirus-insect cells with a poly-histidine tag at the C-terminus (40589-V08B1), and nucleocapsid protein (NP) (Met1-Ala419) expressed in baculovirus-insect cells with a poly-histidine tag at the C-terminus (40588-V08B) were all purchased from Sino Biological (Beijing, China). Lyophilized powder of the recombinant proteins was reconstituted by adding sterile deionized water to prepare a stock solution of 0.25 µg/mL.

The primary and secondary antibodies (Sino Biological) employed for co-incubation experiments and Western blot analysis were rabbit polyclonal antibody against SARS-CoV-2 spike S1 subunit (40591-T62), and rabbit polyclonal antibody against SARS-CoV-2 spike S2 (40590-T62). The goat anti-rabbit IgG-Fc antibody conjugated with HRP reporter (SSA003) served as the secondary antibody for Western blotting.

S. pneumoniae strains were grown on BBL trypticase soy agar with 5% sheep blood (TSA II) plates (Becton Dickinson, Franklin Lakes, NJ, USA). Plates were incubated for 18-24 h at 37 • C with 5% CO 2 . A single bacterial colony was inoculated into 10 mL of sterile BHI broth (Sigma-Aldrich, St Louis, MO, USA), 10-fold serially diluted into the same medium, and propagated overnight for 18 h in an atmosphere of 5% CO 2 . Overnight cultures that were still in exponential phase (OD600 ≈ 0.2-0.4) were selected for experiments. For growing S. pneumoniae biofilm, 1 mL of overnight culture was inoculated into 9 mL of fresh BHI broth, and incubated at 37 • C with 5% CO 2 until OD600 ≈ 0.4 was reached. When S. pneumoniae culture reached 2.0-4.0 × 10 8 CFU/mL, the culture was diluted 10-fold with fresh BHI broth, and 100 µL of diluted culture was inoculated into each well of a sterile Cellstar 96-well plate (Greiner Bio-One, Frickenhausen, Germany) containing 100 µL of BHI with 2% D-glucose (1st BASE, Singapore). The final concentration of S. pneumoniae was 2.0-4.0 × 10 6 CFU per well. The 96-well plate was incubated at 37 • C for 18 h in an atmosphere of 5% CO 2 .

S. aureus strains were grown on nutrient agar plates (Oxoid, Basingstoke, England, UK) at 37 • C for 18-24 h. A single bacterial colony was inoculated into 10 mL of sterile nutrient broth and propagated overnight for 18 h. For growing S. aureus biofilm, 1 mL of overnight culture was inoculated into 9 mL of fresh nutrient broth, and incubated at 37 • C until OD600 ≈ 0.4 was reached. When S. aureus culture reached 2.0-4.0 × 10 8 CFU/mL, 100 µL of culture was inoculated into each well of a sterile Cellstar 96-well plate containing 100 µL of nutrient broth with 2% D-glucose. The final concentration of S. aureus was 2.0-4.0 × 10 7 CFU per well. The 96-well plate was incubated at 37 • C for 18 h.

After 18 h of incubation, expended medium was carefully aspirated from the wells and discarded. The wells were washed thrice each with 200 µL of sterile phosphate-buffered saline (PBS). The wells were air-dried and stained for 15 min with 200 µL of 0.1% crystal violet (dissolved in water). Excess crystal violet was aspirated from the wells, which were washed thrice each with 200 µL of sterile distilled water. Adherent crystal violet was dissolved by adding 200 µL of 95% ethanol into each well. The dissolved crystal violet solution was transferred to a new microplate and optical density (at 570 nm) was measured using an Infinite M200 Plate Reader (Tecan, Mannedorf, Switzerland). To compensate for background absorbance, readings were subtracted from the average value of sterile medium and crystal violet (reference blank).

Recombinant spike protein stocks were diluted to 10 pmol/mL with BHI or nutrient broth with 2% D-glucose-each solution (100 µL) was dispensed into their respective wells of a 96-well plate. When S. pneumoniae culture reached 2.0-4.0 × 10 8 CFU/mL, the culture was diluted 10-fold with fresh BHI broth, and 100 µL of diluted culture was inoculated into each well. The 96-well plate was incubated at 37 • C in an atmosphere of 5% CO 2 . Similarly, when S. aureus culture reached 2.0-4.0 × 10 8 CFU/mL, 100 µL of culture was inoculated into each well of a 96-well plate, and incubated at 37 • C. After 18 h of incubation, the biofilm was estimated by crystal violet assay.

Recombinant spike protein stocks and antibodies were diluted to the desired concentrations with BHI or nutrient broth with 2% D-glucose. Subsequently, each solution (100 µL) was dispensed into their respective wells of a 96-well plate, and incubated at room temperature for 1 h with constant shaking. When S. pneumoniae culture reached 2.0-4.0 × 10 8 CFU/mL, the culture was diluted 10-fold with fresh BHI broth, and 100 µL of diluted culture was inoculated into each well. The 96-well plate was incubated at 37 • C in an atmosphere of 5% CO 2 . Similarly, when S. aureus culture reached 2.0-4.0 × 10 8 CFU/mL, 100 µL of culture was inoculated into each well of a 96-well plate, and incubated at 37 • C. After 18 h of incubation, the biofilm was estimated by crystal violet assay.

MHV A59 strain was diluted to the desired concentrations (2.0-4.0 × 10 4 PFU/mL for S. pneumoniae, and 2.0-4.0 × 10 5 PFU/mL for S. aureus) with BHI or nutrient broth with 2% D-glucose. Then, MHV suspension (100 µL) was dispensed into their respective wells of a 96-well plate. When S. pneumoniae culture reached 2.0-4.0 × 10 8 CFU/mL, the culture was diluted 10-fold with fresh BHI broth, and 100 µL of diluted culture inoculated into each well. The 96-well plate was incubated at 37 • C in an atmosphere of 5% CO 2 . Similarly, when S. aureus culture reached 2.0-4.0 × 10 8 CFU/mL, 100 µL of culture was inoculated into each well. This resulted in virus PFU-to-bacteria CFU ratios of 0.001. The 96-well plate was incubated at 37 • C for 18 h, and the biofilm was estimated by crystal violet assay.

The biofilms were cultured in the presence of polystyrene microspheres (Polysciences, Warrington, PA, USA), each of which being 1.93 ± 0.05 µm in diameter. When S. pneumoniae culture reached 2.0-4.0 × 10 8 CFU/mL, the culture was diluted 10-fold with fresh BHI broth, and 100 µL of diluted culture was inoculated together with polystyrene microspheres into each well. The 96-well plate was incubated at 37 • C in an atmosphere of 5% CO 2 . Similarly, when S. aureus culture reached 2.0-4.0 × 10 8 CFU/mL, 100 µL of culture was inoculated together with polystyrene microspheres into each well. The bacterial culture and microspheres were mixed well using a pipette. The 96-well plate was incubated at 37 • C for 18 h. Particle-tracking experiments were then performed with a Nikon Eclipse Ti-U microscope equipped with 100× long working distance objective. The trajectories of different beads in randomly chosen locations, separated by around 100 µm, were recorded with a metal oxide semiconductor (CMOS) camera (Basler A504k) at a rate of 250 frames per second. Video clips of 3-5 minutes' duration were analyzed with MATLAB (Natick, MA, USA), and the particle trajectories were derived using public domain tracking software at http://site.physics.georgetown.edu/matlab/ (last accessed on 15 November 2021). All further data analysis was carried out using in-house-developed software scripts written in MATLAB code. The pixel resolution of 0.12 µm was calibrated using a metric ruler.

Overnight cultures of S. pneumoniae and S. aureus were harvested, washed, and resuspended in the corresponding media. The bacteria (2.0-4.0 × 10 9 CFU/mL) were incubated with 10 pmol of spike protein at 4 • C for 90 min. Subsequently, the bacterial suspensions were washed thrice each with sterile PBS, and lysed in RIPA buffer (Thermo Fisher Scientific, Waltham, MA, USA) supplemented with protease and phosphatase inhibitor mini tablets (Pierce; one tablet per 10 mL of RIPA buffer). Protein quantification was performed using the Pierce BCA protein assay kit (Thermo Fisher Scientific), with BSA being used to construct the standard curve. Laemmli buffer (6×) was added to 30 µg of purified protein lysates, to a final concentration of 1×. The protein samples were placed in a dry bath at 100 • C for 5 min, and then centrifuged at 10,000 rpm for 5 min. The purified protein lysates were loaded onto a SDS-PAGE (10%) gel for separation. The separated proteins were then transferred onto a PVDF membrane in transfer buffer at 250 mA for 1 h. The membrane was blocked in 5% BSA, prepared in 0.1% PBST overnight at 4 • C, followed by incubation with primary antibody (1:1000 dilution) in 5% BSA in 0.1% PBST for 1 h at room temperature. The blots were washed thrice in 0.1% PBST for 5 min each, and subsequently incubated with goat anti-rabbit IgG-Fc secondary antibody (1:1000 dilution) for 1 h. The blots were washed thrice in 0.1% PBST for 5 min each, and then incubated in WesternBright Enhanced Chemiluminiscent HRP substrate (Advansta, San Jose, CA, USA) prior to imaging using the ChemiDoc XRS imager (Bio-Rad, Hercules, CA, USA).

Proteins from bacterial samples were extracted in 100 mM triethylammonium bicarbonate (TEAB) buffer (Sigma-Aldrich). For in-trap digestion, protein samples were extracted and processed using the S-Trap micro column (Protifi, Farmingdale, NY, USA) according to the manufacturer's recommendations. Tryptic peptides were subjected to LC-MS analysis using an Eksigent nanoLC-Ultra and ChiPLC-nanoflex in trap-elute configuration, with a Trajan ProteoCol C18P (3 µm particle size, 120 Å pore size, 300 µm ID × 10 mm length) trap column, and a Thermo Scientific Acclaim PepMap 100 C18 (3 µm particle size, 100 Å pore size, 75 µm ID × 250 mm length) analytical column. Peptides were separated by a gradient formed by 2% acetonitrile, 0.1% formic acid (mobile phase A) and 98% acetonitrile, 0.1% formic acid (mobile phase B): 5-12% B (0-20 min), 12-30% B (20-60 min), 30-90% B (60-62 min), 90-90% B (62-69 min), 90-5% B (69-72 min), and 5-5% B (72-85 min), with the total flow rate maintained at 300 nL/min. The mass spectrometry was performed on a SCIEX TripleTOF 5600 system (nebulizer gas GSI: 12 units, curtain gas: 30 units, IonSpray voltage floating: 2300 V, interface heater temperature: 150 • C) in information-dependent (IDA) mode to switch automatically between MS and MS/MS acquisition. MS spectra were acquired across the mass range of 350-1250 m/z in high-resolution mode using 250 ms accumulation time per spectrum. A maximum of 50 precursors per cycle with the most intense m/z values, with a threshold of >125 counts per second (cps) and charge state between 2+ and 5+, were selected for fragmentation from each MS spectrum. Tandem mass spectra were recorded at 100-1800 m/z in high-sensitivity mode using 50 ms accumulation time, 12 s dynamic exclusion, and with rolling collision energy enabled.

Peptide identification and the detection of post-translational modifications were achieved using the ProteinPilot 5.0 software (AB SCIEX, Framingham, MA, USA) against Uniprot reference proteome databases UP000437160 (for S. pneumoniae), UP000008816 (for S. aureus), UP000464024 (for SARS-CoV-2), and UP000007192 (for MHV A59); they were spiked with common contaminant proteins (cRAP) using the following parameters: cysteine alkylation-methyl methanethiosulfonate (MMTS); digestion-trypsin; ID focusbiological modifications and amino acid substitutions; search effort-thorough ID. FDR analysis was carried out with detected protein threshold (Unused ProtScore) set at 0.05. Automatic bias correction was selected for calculation of protein ratios. Proteins corresponding to local FDR < 5% and global FDR < 1% were selected for further analyses.

For the estimation of protein concentration, Mascot Server 2.7 (Matrix Science, Boston, MA, USA) was used. A search using the above-mentioned Uniprot reference proteosome databases was carried out using the following parameters: cysteine alkylation-MMTS; fixed modification-methylthio (C); variable modifications-acetyl (protein N-term); oxidation (M); peptide mass tolerance of 100 ppm; fragment mass tolerance of 0.04 Da. The concentrations of detected proteins were estimated by a two-step process. Firstly, the weighted fraction (percentage) of each protein was determined by its exponentially modified protein abundance index (emPAI) score in MS profile and its molecular weight [65] . The weight fraction was then multiplied by the total concentration of the respective sample. Protein content (percentage) was calculated using the following formulas. Institutional Review Board Statement: Not applicable.

Informed Consent Statement: Not applicable.

The mass spectrometry proteomics data have been deposited to the Pro-teomeXchange Consortium via the PRIDE partner repository with the dataset identifier PXD029967.

Co-infections among patients with COVID-19: The need for combination therapy with non-anti-SARS-CoV-2 agents?

Clinical course and risk factors for mortality of adult inpatients with COVID-19 in Wuhan, China: A retrospective cohort study

Epidemiological and clinical characteristics of patients with coronavirus disease-2019 in Shiyan City

Co-infections, secondary infections, and antimicrobial use in patients hospitalised with COVID-19 during the first pandemic wave from the ISARIC WHO CCP-UK study: A multicentre, prospective cohort study

Rates of co-infection between SARS-CoV-2 and other respiratory pathogens

Antibiotic use in patients with COVID-19: A "snapshot" Infectious Diseases International Research Initiative (ID-IRI) survey

Influenza virus-related critical illness: Pathophysiology and epidemiology

The frequency of influenza and bacterial coinfection: A systematic review and meta-analysis. Influenza Other Respir

Regulation of Staphylococcus aureus virulence

The host immune dynamics of pneumococcal colonization: Implications for novel vaccine development

The commensal microbiota and viral infection: A comprehensive review

Altered signal transduction in the immune response to influenza virus and S. pneumoniae or S. aureus co-infections

Bacterial adherence to pharyngeal cells during viral infection

Virus interactions with bacteria: Partners in the infectious dance

Respiratory viruses augment the adhesion of bacterial pathogens to respiratory epithelium in a viral species-and cell type-dependent manner

Molecular pathogenesis of secondary bacterial infection associated to viral infections including SARS-CoV-2

Capsules of virulent pneumococcal serotypes enhance formation of neutrophil extracellular traps during in vivo pathogenesis of pneumonia

Viscoelasticity of entangled lambda-phage DNA solutions

Estimating the viscoelastic moduli of complex fluids using the generalized Stokes-Einstein equation

Streptococcus pneumoniae biofilm formation and dispersion during colonization and disease

Identifying the interaction between influenza and pneumococcal pneumonia using incidence data

Insights into the interaction between influenza virus and pneumococcus

In vivo and in vitro studies on the roles of neutrophil extracellular traps during secondary pneumococcal pneumonia after primary pulmonary influenza infection

Influenza A virus facilitates Streptococcus pneumoniae transmission and disease

Interkingdom signaling induces Streptococcus pneumoniae biofilm dispersion and transition from asymptomatic colonization to disease

Host physiologic changes induced by influenza a virus lead to Staphylococcus aureus biofilm dispersion and transition from asymptomatic colonization to invasive disease

Monoclonal antibodies for the S2 subunit of spike of SARS-CoV-1 cross-react with the newly-emerged SARS-CoV-2

Understanding neutralising antibodies against SARS-CoV-2 and their implications in clinical practice

Structural features of coronavirus SARS-CoV-2 spike protein: Targets for vaccination

The puzzling mutational landscape of the SARS-2-variant Omicron

Comparative transcriptomic and molecular pathway analyses of HL-CZ human pro-monocytic cells expressing SARS-CoV-2 spike S1, S2, NP, NSP15 and NSP16 genes. Microorganisms

Domains and functions of spike protein in Sars-Cov-2 in the context of vaccine design

SARS-CoV-2 spike protein S1 subunit induces pro-inflammatory responses via toll-like receptor 4 signaling in murine and human macrophages

Metformin suppresses monocyte immunometabolic activation by SARS-CoV-2 spike protein subunit 1

The SARS-CoV-2 spike protein subunit S1 induces COVID-19-like acute lung injury in K18-hACE2 transgenic mice and barrier dysfunction in human endothelial cells

The SARS-CoV-2 spike glycoprotein biosynthesis, structure, function, and antigenicity: Implications for the design of spike-based vaccine immunogens

Infection with human coronavirus NL63 enhances streptococcal adherence to epithelial cells

Bacterial co-infection and secondary infection in patients with COVID-19: A living rapid review and meta-analysis

The role of co-infections and secondary infections in patients with COVID-19

Incidence of co-infections and superinfections in hospitalized patients with COVID-19: A retrospective cohort study

Secondary bacterial pneumonias and bloodstream infections in patients hospitalized with COVID-19

Co-infection in critically ill patients with COVID-19: An observational cohort study from England

The interface between COVID-19 and bacterial healthcare-associated infections

SARS-CoV-2, bacterial co-infections, and AMR: The deadly trio in COVID-19?

SARS-CoV-2 spike protein binds to bacterial lipopolysaccharide and boosts proinflammatory activity

Interactions between DNA and the Hfq amyloid-like region trigger a viscoelastic response

Microrheology and spatial heterogeneity of Staphylococcus aureus biofilms modulated by hydrodynamic shear and biofilm-degrading enzymes

Does efficiency sensing unify diffusion and quorum sensing?

LuxS mediates iron-dependent biofilm formation, competence, and fratricide in Streptococcus pneumoniae

LuxS is required for persistent pneumococcal carriage and expression of virulence and biosynthesis genes

Mutation of luxS of Streptococcus pneumoniae affects virulence in a mouse model

5-Fluorouracil blocks quorum-sensing of biofilm-embedded methicillin-resistant Staphylococcus aureus in mice

Role of the luxS quorum-sensing system in biofilm formation and virulence of Staphylococcus epidermidis

Regulatory mechanisms of the LuxS/AI-2 system and bacterial resistance

Henriques-Normark, B. Capsule and D-alanylated lipoteichoic acids protect Streptococcus pneumoniae against neutrophil extracellular traps

Regulation of D-alanylation of lipoteichoic acid in Streptococcus gordonii

Staphylococcus and biofilms

Isolation of Streptococcus pneumoniae biofilm mutants and their characterization during nasopharyngeal colonization

Switch from planktonic to sessile life: A major event in pneumococcal pathogenesis

A putative LysR-type transcriptional regulator inhibits biofilm synthesis in Pseudomonas aeruginosa

MgrA negatively regulates biofilm formation and detachment by repressing the expression of psm operons in Staphylococcus aureus

Modulation of eDNA release and degradation affects Staphylococcus aureus biofilm maturation

Impaired capsular polysaccharide is relevant to enhanced biofilm formation and lower virulence in Streptococcus pneumoniae

Streptococcus pneumoniae biofilm formation is strain dependent, multifactorial, and associated with reduced invasiveness and immunoreactivity during colonization

Exponentially modified protein abundance index (emPAI) for estimation of absolute protein amount in proteomics by the number of sequenced peptides per protein

We thank Kelly Lau for administrative and technical support.

The authors declare no conflict of interest.