key: cord-0738606-md5033i3 authors: Amato-Lourenço, Luís Fernando; dos Santos Galvão, Luciana; de Weger, Letty A.; Hiemstra, Pieter S.; Vijver, Martina G.; Mauad, Thais title: An emerging class of air pollutants: Potential effects of microplastics to respiratory human health? date: 2020-08-13 journal: Sci Total Environ DOI: 10.1016/j.scitotenv.2020.141676 sha: 5954842e3a0663d7c349cfff1db56436e3a180eb doc_id: 738606 cord_uid: md5033i3 Abstract It is increasingly recognized that the ubiquity of convenient single-use plastic has resulted in a global plastic pollution challenge, with substantial environmental and health consequences. Physical, chemical, and biological processes result in plastic weathering, with eventual formation of debris in the micro to nano size range. There is an increasing awareness that plastic fragments are dispersed in the air and can be inhaled by humans, which may cause adverse effects on the respiratory system and on other systems. Urban environments are often characterized by high concentrations of fine airborne dust from various sources. To date, however, there is limited information on the distribution, shape, and size of microplastics in the air in urban and other environments. In this article, we review and discuss our current understanding of the exposure characteristics of airborne plastic debris in urbanized areas, focusing on concentration, size, morphology, presence of additives and distributions of different polymers. The natural and extend data are compiled and compared to laboratory-based analyses to further our understanding of the potential adverse effects of inhaled plastic particles on human health. In addition to sorbing various toxicants, exposure of MPs to different environmental conditions may enable the formation of microbial biofilms on these MPs (Besseling et al., 2017; Foulon et al., 2016) . Biofilm not only can significantly modify the physical properties of MPs, such as size and density (McCormick, et al., 2014) , but can also result in MPs serving as a vector for microbial pathogens (Foulon et al., 2016) . Due to their increasing presence in the environment and their ubiquitous distribution, MPs are among the most prominent environmental problems faced by government agencies around the world (Catarino et al., 2018; Nizzetto, Futter and Langaas, 2016) . This review addresses the role of MPs as an emerging airborne pollutant with emphasis on the potential effects of inhaled MPs on human health. Although exposure to microplastics, for example, through ingestion of food can also have adverse health effects, this review is focused on microplastics as an inhaled toxicant and/or airborne vector for toxicants and pathogens. To this end, we first discuss the source and fate of microplastics in the air, based on studies with both indoor and outdoor sources. We then discuss their potential effects of inhalation on human health. printing, and the resuspension of polymer fragments in urban dust (Catarino et al., 2018; UNEP, 2016) . Figure 1 shows the main sources of atmospheric MPs. In the few reported studies that have characterized the morphology of MPs in the atmosphere, fibres (length > 5 μm, with 3 µm length to diameter) have been the most commonly reported form (Dris et al., 2015; Dris et al., 2016; Cai et al., 2017) . The increasing use of synthetic fibres with a diameter of 1-5 μm by the textile industry has contributed directly and indirectly to textiles as a source of fibrous MPs (Gasperi et al., 2018) . Nylon, polyester, polyolefin, and acrylic are typical man-made microfibres. Their release into the atmosphere is related to the use of textiles and the washing/drying process (Cesa et al., 2017) . A single garment may release approximately 1,900 fibres per wash (Browne et al., 2011) . Industrially, cutting and grinding processes for polymeric materials can contribute to the formation and release of these particles in the air (Wright and Kelly, 2017) . MPs may also be released into the atmosphere as a result of wind-driven transport In cities, MPs accumulate in soil and road dust. Polymeric materials of low density may be easily suspended/resuspended in the atmosphere by wind and vehicular traffic flow (Abbasi et al., 2018) . Automotive wear and tear from car tyres are recognized as a source of microplastics in the atmosphere through mechanical abrasion (Kole et al., 2017) . Synthetic rubber consists of a hydrocarbon-based polymer (styrene-1.3butadene rubber (SBR)). Material generated by automotive tire abrasion is commonly reported as a particulate matter (PM) constituent in air pollution studies (Wright and Kelly, 2017) . Tyre wear particles may represent between 0.8-8.5% of PM10 mass fraction and 1-10% of PM2.5 in the air (Panko et al., 2019) . In the Netherlands, it is estimated that 17,000 tonnes of rubber tyre-wear are released into the environment every year (Verschoor et al., 2014) . In Germany, emissions can reach up to 92,594 tonnes per year (Kole et al., 2017) . The estimated global average of per capita tyre wear emissions is 0.81 kg per year (Kole et al., 2017) . Modelling 3D printers are another potential source of MPs in the air. Fused deposition modelling (FDM) printers commonly use filament materials such as thermoplastics (acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), polyamide (nylon) and polyethylene terephthalate (PET)). During the printing process the emission of nonengineered nano or ultrafine particles may occur. A study by Zhang et al. (2017) reported a particle concentration of up to 106 particles/cm 3 with mean particle sizes of 20 to 40 nm during an experiment where a 3D printer using acrylonitrile butadiene styrene (ABS) filaments was run inside a test chamber. Although some studies report specific sources of MPs in the atmosphere, few investigations have quantified and characterized the presence of MPs in urban air J o u r n a l P r e -p r o o f Journal Pre-proof (Prata, 2018) . A study in the Greater Paris region analysed synthetic fibres present in the atmosphere using passive sampling. They reported the deposition of 29-280 particles/m 2 /day or 3.5-7.6 x 10 10 MPs/year (Dris et al., 2015) . Cai et al. (2017) reported that in the city of Dongguan (China), the concentration of fibrous and nonfibrous MPs from atmospheric deposition varied from 175 -313 particles/m 2 /day. The length of most fibres ranged from 200-700 µm. A study conducted by Liu et al. (2019) in Shanghai investigated the potential source and spatial distribution of atmospheric MPs using an active suspended particulate sampler. Fibres comprised 67% of all MPs along with fragments (30%) and granules (30%). Synthetic compounds comprised 54% of the observed particles. In contrast, Stanton et al. (2019) reported that atmospheric depositions sampled from the roof of three campuses of the University of Nottingham (UK) had a high prevalence of natural textile fibres (97.7%) compared to extruded textile fibres. In London, Wright et al. (2020) found 15 different polymers in the air with deposition rates ranging from 575 to 1008 particles/m 2 /day. The large majority of observed MPs in this study were fibres (92%). Outdoor airborne MPs levels are likely to be underestimated as they may simply be aggregated with other particles as a component fraction of atmospheric particulate matter (Prata, 2018) . So far, no studies have reported the overall contribution of J o u r n a l P r e -p r o o f Journal Pre-proof microplastics as a fraction of atmospheric PM. Particle size, density, meteorological factors and geographic factors, such as precipitation rates, wind speed and direction, temperature, and urban topography, may directly affect the behaviour, transport, and residence time of MPs in the atmosphere (Prata, 2018) . Furthermore, airborne microplastics are a potential source of microplastic pollution in marine environments. It is estimated that between 1.15 and 2.41 million tonnes of plastic waste enter the ocean every year from rivers (Lebreton et al., 2017) . Airborne MPs may also enter waterways by deposition. Conversely, it is not known to what extent water-derived MPs can be a source of airborne MPs. Table 1 product. They found that many plastics contain chemicals that induced general toxicity (six out of ten products), oxidative stress (four out of ten products) and endocrinedisrupting effects (three out of ten products). It is unclear to what extent exposure to airborne MPs is a threat to public health. Discussion of the potential adverse effects of airborne MPs on human health has only recently emerged (Wright and Kelly, 2017; Gasperi et al., 2018; Prata, 2018) . The fate of inhaled MPs and their uptake in lung tissue is one of many unknowns. For example, there is only one report of polymeric fibres in human lung tissue, which was published more than 20 years ago (Pauly et al., 1998) . In that study, polymeric and cellulosic fibres were found in 97% of malignant lungs (n = 32/33) and in 83% of non-neoplastic lungs (n =67/81). The analysed fibres had lengths up to 135 µm and showed little indication of deterioration, which may indicate their bioresistance and biopersistence in lungs. This single study shows that polymeric fibres have the potential to penetrate into deeper parts of the lungs and highlights the need for confirmation of these findings and more in-depth analyses. Importantly, studies on, for example, asbestos fibres have shown that despite their length, such fibres can be deposited in the alveolar region of the lung. This result is based on the finding that asbestos fibres with lengths ranging from 50-200 μm were found in the alveolar cavity despite their long J o u r n a l P r e -p r o o f Journal Pre-proof size (Barlow et al., 2017; Timbrell, 1965) . Although physical characteristics of polymeric and asbestos fibres differ, both are known to resist biodegradation (Pauly et al., 1998) . Particle deposition in the lung is a function of its "aerodynamic diameter" (particle size expressed in terms of settling speed) (Donaldson et al., 1993) . Fibre diameter plays a major role in its breathability, while length is a key determinant of its persistence and toxicity. Pleural mesotheliomas are usually associated with fibres over 8 µm in length and less than 0.25 µm in diameter (Donaldson et al., 1993) . Furthermore, it is known that the efficiency of fibre deposition increases with a decrease in diameter (Donaldson et al., 1993) . Fibres can be deposited in terminal bronchioles, alveolar ducts, and alveoli, resulting in chronic inflammation, granulomas or fibrosis (Greim et al., 2001; Beckett, 2000) . The severity of tissue damage is usually a function of an inhaled dose over time (Warheit et al., 2001) . Greim et al. (2001) suggested that the interaction between cells and particles/fibres can cause inflammation, which in turn induces cell proliferation and secondary genotoxicity due to the continuous formation of reactive oxygen species (ROS). Overproduction of ROS results in oxidative stress, causing chronic inflammation and contributing to the pathogenesis of lung diseases. Fibre persistence in the lung is related to its aerodynamic properties (Tian and Ahmadi, 2013) . The fibre length to diameter ratio determines their uptake by alveolar macrophages and affects mucociliary clearance rates. Usually, long, thin fibres are incompletely phagocytosed and are more biologically active than short fibres (Donaldson et al., 1993) . These persistent particles can translocate into the epithelial layers (Donaldson et al., 2011) and induce acute or chronic inflammatory processes. Occupational exposure studies associate inhalation of pristine MPs with an increased incidence of interstitial lung disease (Abbasi et al., 2018; Boag et al., 1999; Eschenbacher et al., 1999) . Occupational exposure to polyvinyl chloride (PVC) dust was associated with exertional dyspnoea and decreased pulmonary function in factory workers (Soutar et al., 1980) . A study conducted by Atis et al. (2005) evaluated the respiratory effects of occupational polypropylene flock exposure. The risk of respiratory symptoms increased 3.6-fold in polypropylene flocking workers when compared to controls. Lung biopsies from workers exposed to different airborne synthetic fibres (acrylic, polyester (terylene) nylon) revealed different degrees of inflammation, granulomas and interstitial fibrosis (Pimentel et al., 1975) . These observations from occupational medicine, combined with the recent detection of MPs in airborne samples, point to a possible risk for human exposure via inhalation. Collectively, these studies suggest that there may be a link between MP exposure and development of interstitial lung diseases. The initial triggers for development of interstitial lung diseases are largely unknown. Further research in this area may reveal whether naturally weathered MPs could serve as a trigger. Few studies have investigated the potential toxic effects of micro-and nanoplastic particles on cultured human epithelial lung cells as a model for pulmonary toxicology. Plastic waste is one of the greatest contemporary environmental challenges. Airborne In light of the COVID-19 pandemic, concerns about plastic waste pollution in the healthcare system have increased due to an unprecedented demand for single-use products such as vinyl gloves, face masks, plastic ventilator components, visors, gowns, and bags; all of these products are produced from polymeric materials (Fadare and Okoffo, 2020) . The global medical plastics market is projected to grow from USD 25.1 billion in 2020 to USD 29.4 billion by 2021 (Research and Markets, 2020) . In China, as of Feb 2020, 14.8 million masks were being produced daily (Xinhuanet, 2020) . The available data indicate that MPs are biopersistent, ubiquitous and numerous. The exposure risk of inhaled MPs for human (respiratory) health is also unresolved. One of the main questions to be answered is whether and how naturally weathered inhaled MPs may cause or contribute to the pathogenesis of different pulmonary diseases. Data on exposure characteristics such as concentration, size, morphology, and distribution of different airborne polymers are prerequisites for understanding the potential effects of MPs on human health. Although occupational studies show pulmonary effects associated with MP inhalation, the doses tested in these studies are probably higher than those of actual environmental concentrations. However, an important difference is that sorption of co-pollutants such as transition metals, organic compounds, and pathogenic microorganisms is likely lower on the surface of occupational particles than on environmental particles. Many of the deleterious health outcomes associated with MPs may be related to the desorption of these contaminants in the respiratory system following inhalation. Another question to be addressed is whether inhaled MPs can translocate to the blood and/or be carried to mediastinal lymph nodes. J o u r n a l P r e -p r o o f Given the heterogeneous characteristics, sources, and fates of MPs, it is necessary to reconceptualize microplastics as a new class of contaminant, rather than as a single pollutant -as suggested by Rochman et al. (2019) . Combined with the realization that inhaled MPs constitute a significant threat to human health, as discussed in this review and an increasing number of reports, new avenues of research are needed to address the plastic pollution challenge. Distribution and potential health impacts of microplastics and microrubbers in air and street dusts from Asaluyeh County Atmospheric transport and deposition of microplastics in a remote mountain catchment The respiratory effects of occupational polypropylene flock exposure Asbestos fiber length and its relation to disease risk Occupational Respiratory Diseases White and wonderful? Microplastics prevail in snow from the Alps to the Arctic Fate of nano-and microplastic in freshwater systems: A modeling study Plastics in soil: Analytical methods and possible sources The pathology of interstitial lung disease in nylon flock workers Accumulation of microplastic on shorelines worldwide: sources and sinks Nylon flock-associated interstitial lung disease Indoor air pollution: new EU research reveals higher risks than previously thought Covid-19 face masks: A potential source of microplastic fibers in the environment Colonization of Polystyrene Microparticles by Vibrio crassostreae: Light and Electron Microscopic Investigation Marine litter plastics and microplastics and their toxic chemicals components: the need for urgent preventive measures First overview of microplastics in indoor and outdoor air Microplastics in air: Are we breathing it in? Microplastics in the marine environment: a review of the methods used for identification and quantification Adverse effects of microplastics and oxidative stress-induced MAPK/Nrf2 pathway-mediated defense mechanisms in the marine copepod Paracyclopina nana Polyethylene and biodegradable mulches for agricultural applications: a review Wear and Tear of Tyres: A Stealthy Source of Microplastics in the Environment Biodegradability of plastics: challenges and misconceptions River plastic emissions to the world's oceans Microplastic particles cause intestinal damage and other adverse effects in zebrafish Danio rerio and nematode Caenorhabditis elegans Microplastics in sewage sludge from the wastewater treatment plants in China Source and potential risk assessment of suspended atmospheric microplastics in Shanghai Microplastic is an abundant and distinct microbial habitat in an urban river Are agricultural soils dumps for microplastics of urban origin? Evaluation of Tire Wear Contribution to PM2.5 in Urban Environments Inhaled cellulosic and plastic fibers found in human lung tissue Respiratory disease caused by synthetic fibres: a new occupational disease Airborne microplastics: consequences to human health? Covid-19 impact on the medical plastics market by type (engineering plastics and standard plastics), application (medical disposables, prosthetics, medical instruments & tools and drug delivery) and region -global forecast to 2021 A critical overview of the analytical approaches to the occurrence, the fate and the behavior of microplastics in the environment Long-term sorption of metals is similar among plastic types: implications for plastic debris in aquatic environments Rethinking microplastics as a diverse contaminant suite Epidemiological study of respiratory disease in workers exposed to polyvinylchloride dust Freshwater and airborne textile fibre populations are dominated by 'natural', not microplastic, fibres Oyster reproduction is affected by exposure to polystyrene microplastics Microplastic potentiates triclosan toxicity to the marine copepod Acartia tonsa (Dana) Plastics, the environment and human health: current consensus and future trends Fiber transport and deposition in human upper tracheobronchial airways The inhalation of fibrous dusts United Nations Environment Programme. Marine plastic debris and microplastics -Global lessons and research to inspire action and guide policy Simulating human exposure to indoor airborne microplastics using a Freshwater Microplastics. The handbook of environmental chemistry Chemical Pollutants Sorbed to Ingested Microbeads from Personal Care Products Accumulate in Fish Potential Pulmonary Effects of Man-Made Organic Fiber (MMOF) Dusts It is raining plastic. US Geological Survey. Open file report Plastic and human health: A micro issue? Atmospheric microplastic deposition in an urban environment and an evaluation of transport China focus: mask makers go all out in fight against novel coronavirus Characterization of particle emissions from consumer fused deposition modeling 3D printers Various forms and deposition fluxes of microplastics identified in the coastal urban atmosphere Benchmarking the in Vitro Toxicity and Chemical Composition of Plastic Consumer Products projects 2019/03397-5 and 2019/02898-0. The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.J o u r n a l P r e -p r o o f