key: cord-0745756-9myoq10w authors: Blázquez, E.; Rodríguez, C.; Ródenas, J.; Saborido, N.; Solà‐Ginés, M.; Pérez de Rozas, A.; Campbell, J. M.; Segalés, J.; Pujols, J.; Polo, J. title: Combined effects of spray‐drying conditions and postdrying storage time and temperature on Salmonella choleraesuis and Salmonella typhimurium survival when inoculated in liquid porcine plasma date: 2018-06-27 journal: Lett Appl Microbiol DOI: 10.1111/lam.13017 sha: ac925211af6bed95dc0a509bda61b24398ac5f2e doc_id: 745756 cord_uid: 9myoq10w The objective of this study was to determine the effectiveness of the spray‐drying process on the inactivation of Salmonella choleraesuis and Salmonella typhimurium spiked in liquid porcine plasma and to test the additive effect of immediate postdrying storage. Commercial spray‐dried porcine plasma was sterilized by irradiation and then reconstituted (1:9) with sterile water. Aliquots of reconstituted plasma were inoculated with either S. choleraesuis or S. typhimurium, subjected to spray‐drying at an inlet temperature of 200°C and an outlet temperature of either 71 or 80°C, and each spray‐drying temperature combinations were subjected to either 0, 30 or 60 s of residence time (RT) as a simulation of residence time typical of commercial dryers. Spray‐dried samples were stored at either 4·0 ± 3·0°C or 23·0 ± 0·3°C for 15 days. Bacterial counts of each Salmonella spp., were completed for all samples. For both Salmonella spp., spray‐drying at both outlet temperatures reduced bacterial counts about 3 logs at RT 0 s, while there was about a 5·5 log reduction at RT 60 s. Storage of all dried samples at either 4·0 ± 3·0°C or 23·0 ± 0·3°C for 15 days eliminate all detectable bacterial counts of both Salmonella spp. SIGNIFICANCE AND IMPACT OF THE STUDY: Safety of raw materials from animal origin like spray‐dried porcine plasma (SDPP) may be a concern for the swine industry. Spray‐drying process and postdrying storage are good inactivation steps to reduce the bacterial load of Salmonella choleraesuis and Salmonella typhimurium. For both Salmonella spp., spray‐drying at 71°C or 80°C outlet temperatures reduced bacterial counts about 3 log at residence time (RT) 0 s, while there was about a 5.5 log reduction at RT 60 s. Storage of all dried samples at either 4.0 ± 3.0°C or 23.0 ± 0.3°C for 15 days was effective for eliminating detectable bacterial counts of both Salmonella spp. Spray-dried blood products (SDBP) are used in human food and animal feed. Ingredients like spray-dried plasma (SDP) or spray-dried red blood cells are used in the food and meat industry to provide texture, emulsion capacity and natural colour properties (Appiah and Peggy 2012) . Likewise, SDP is an ingredient extensively used globally in pig feed due to its well-known beneficial effects on postweaning performance and survival (Torrallardona 2010) . In contrast, pathogen contamination of animal-based ingredients is a major safety concern for both food and feed industries. During the last decade, a significant amount of data has been published about the safety of commercial spray-dried blood products relative to bacteria (Polo et al. 2002) , and enveloped (Polo et al. 2005; Gerber et al. 2014; Opriessnig et al. 2014; Pujols and Segal es 2014) and non-enveloped viruses (Pujols et al. 2008 (Pujols et al. , 2011 Shen et al. 2011; P erez-Bosque et al. 2016) affecting the swine industry. These studies have demonstrated the importance of several features of the manufacturing process of commercial blood products that contribute to the bio-safety of these functional ingredients. In addition, the liquid blood of multiple pigs slaughtered per day is pooled. Pooling of blood that inherently contains antibodies with neutralizing capacity against a variety of pathogens contributes to the biosafety of the finished product (Williams and Khan 2010; Polo et al. 2013) . Spray-drying is based on the desiccation of a solution or suspension into a dried particulate form by spraying the feed into a hot drying chamber. The spray-drying process involves four stages of operation as follows: (i) atomization of liquid source into a hot chamber; (ii) contact between the spray and the drying medium (very hot air at a high gas mass to liquid mass flow volume ratio); (iii) moisture evaporation resulting in particle formation; and (4) separation of dried products from the air stream (Kuriakose and Anandharamakrishnan 2010) . During the spray-drying process, computer systems designed to control and monitor processing temperatures and conditions are used to ensure that SDBP have been exposed to a minimum of 80°C throughout its substance. This is one of the most important critical control points in the manufacturing process of SDBP intended for human or animal consumption. Also, SDBP have low moisture (<9%) and very low water activity (a w < 0Á6). Some pathogens, especially bacteria and enveloped viruses, are not able to survive for a prolonged time in dried materials like SDBP (Perdana et al. 2013; Sampedro et al. 2015; P erez-Bosque et al. 2016) . Therefore, most SDBP manufacturers have adopted postprocessing storage of SDP of porcine origin at room temperature (>20°C) for at least 2 weeks after production as an additional safety feature (Sampedro et al. 2015) . Thus, the sequential action of spray-drying and storage at room temperature for at least 2 weeks after spray-drying and packaging is able to inactivate micro-organisms. Salmonella enterica subsp. enterica Serovar Typhimurium (S. typhimurium) is a cause of acute food-borne zoonosis worldwide (Hohmann 2001) and pigs are important reservoirs (Gebreyes et al. 2004) . S. typhimurium is the second most common serotype associated with foodborne illness. Salmonella enterica subsp. enterica Serovar Choleraesuis (S. choleraesuis) is frequently reported in North America and Asia (Gray et al. 1995; Boyen et al. 2008 ) as causing disease in pigs, with a lower prevalence reported in Europe. S. choleraesuis has also been reported to cause systemic infections in humans (Chiu et al. 2004) . The objective of this study was to determine the effectiveness of the spray-drying process on the inactivation of S. choleraesuis and S. typhimurium spiked in liquid porcine plasma. In addition, a second objective was to test the additive effect of immediate postdrying storage of the dried samples at two different storage temperatures 4Á0 AE 3Á0°C or 23Á0 AE 0Á3°C (room temperature) for 15 days on the inactivation of both Salmonella strains. All samples before Salmonella spp. inoculation showed an initial total plate count <10 CFU ml À1 , which was the limit of detection. Plasma inoculated with S. choleraesuis strain had an initial count of 10Á12 AE 0Á17 log 10 ml À1 and the average count of plasma inoculated with S. typhimurium was 9Á56 AE 0Á17 log 10 ml À1 (Table 1) . Plasma inoculated with S. choleraesuis and spray-dried at inlet temperature of 200 AE 5°C and the two-outlet temperatures indicated reduction in bacterial counts as shown in Table 1 . A higher reduction of S. choleraesuis at 80°C outlet temperature was observed, although it was not statistically different (P = 0Á510) from 71°C outlet temperature. The effect of RT presented a log polynomic regression inactivation curve with an r 2 of 0Á99 ( Fig. 1a ,b) for both outlet temperatures. Higher reduction (P < 0Á001) was observed with prolonged RT. In addition, storage of all dried samples at either 4Á0 AE 3Á0°C or room temperature (23Á0 AE 0Á3°C) for 15 days eliminated surviving S. choleraesuis in dried plasma regardless of the spray-drying conditions or RT. When liquid plasma was inoculated with S. choleraesuis, stored in refrigerated temperature (4Á0 AE 3Á0°C), and seeded in TSA every 2 h for an 8-h period postinoculum, the bacterial count was maintained at an average of 9Á11 AE 0Á05 cfu log 10 ml À1 almost without variation during the entire 8-h period. S. typhimurium inoculated in plasma and spray-dried at inlet temperature of 200 AE 5°C and outlet temperature of 80 AE 1°C or 71 AE 1°C had a reduction in bacterial counts as shown in Table 1 . A significant higher (P < 0Á001) reduction of S. typhimurium for 80°C outlet temperature was found compared to 71°C outlet temperature. The inactivation kinetics presented a polynomic regression curve with an r 2 = 0Á97 (Fig. 2a,b) for both outlet temperatures when the RT was applied. Also, a higher reduction of S. typhimurium with prolonged RT (P < 0Á001) was observed. When liquid plasma was inoculated with S. typhimurium and seeded in TSA plates, no significant changes in counts (8Á69 AE 0Á12 cfu log 10 ml À1 ) over an 8-h period were detected. Furthermore, as observed with S. choleraesuis, storage of all dried samples at either 4Á0 AE 3Á0°C or room temperature (23Á0 AE 0Á3°C) for 15 days eliminated surviving S. typhimurium in dried plasma independently of the spray-drying conditions or RT. This study showed that both spray-drying conditions and extended RT postdrying had a significant effect on reducing the survival of both Salmonella spp. strains studied. In addition, storage time at either 4Á0 AE 3Á0°C or 23Á0 AE 0Á3°C for at least 15 days was shown to eliminate the remaining detectable viable bacteria. During spray-air contact, droplets interact with the hot air in the spraying chamber. Initially, as moisture is lost, the particle is maintained at the adiabatic wet-bulb temperature, then, the droplet temperature increases to reach a value close or similar to the outlet air temperature (Straatsma et al. 2007; Perdana et al. 2013 Perdana et al. , 2015 . Inlet and outlet temperature are the two main parameters that have a major influence on the inactivation of microorganisms. Inactivation occurs predominantly during the initial period of drying, while the remaining drying time further decreases the moisture content (Perdana et al. 2013 (Perdana et al. , 2015 . The survival of micro-organisms is reduced by increasing the inlet temperature, but the outlet air temperature has the greatest impact on pathogen inactivation because this is the minimum temperature that the particle will achieve during the drying process; therefore, higher outlet temperature typically results in higher microbial inactivation (Perdana et al. 2013 (Perdana et al. , 2015 . Relatively high drying temperatures and rapid dehydration are two phenomena involved in microbial inactivation. Although the most important site of damage caused by dehydration is the cytoplasmic membrane (Crowe et al. 1987; Lievense and Van't Riet 1994) , dehydration also produces damage to DNA/RNA and proteins (Lievense 1992) . Results of the current study demonstrated that a greater reduction in both Salmonella spp. counts was observed at the higher outlet temperature, although it was only statistically significant for S. typhimurium. The minimum outlet spray-drying temperature is 80°C for the commercial manufacturing process of SDP (Sampedro et al. 2015; P erez-Bosque et al. 2016) and results of the present study suggested that both Salmonella spp. strains were susceptible to spray-drying even at a lower outlet temperature (71°C). Laboratory spray-dryers are useful for establishing guidelines to scale-up the industrial production of SDP. The main differences between laboratory and pilot plant dryers compared with industrial dryers are design, size and volume processed, all of which affect the retention or dwell time of the product within the chamber (Foster and Leatherman 1995) . Laboratory spray-dryers have reduced retention or dwell time of the product within the chamber (<1 s) compared with commercial dryers (between 20 and 90 s, depending upon scale and design of the dryer). Furthermore, there is an immediate cooling to room temperature of the small quantity of dried product produced by lab dryers in comparison with industrial dryers which process much larger quantity of material that extends the time for dissipation of heat from the dried product. Present results indicated that when extended RT was simulated after drying liquid plasma with a lab dryer at temperatures around 71 or 80°C, there was a significant reduction in survival of both Salmonella spp. strains that was directly related with the higher RT regardless of outlet drying temperature. These results may confirm that commercial dryers may be more effective than lab dryers to inactivate micro-organisms as suggested by Perdana et al. (2013) . Furthermore, SDBP are dry products with low moisture (<9%) and very low water activity (a w < 0Á6). Some pathogens, especially bacteria and enveloped viruses, are not able to survive for prolonged periods of time in dry materials like SDBP (Sampedro et al. 2015) . Several mechanisms affecting microbial survival in dry materials have been described, such as, oxidative stress and reactive oxygen species formation which produces lipid peroxidation, and the browning reaction of sugars that cause protein denaturation and DNA damage. These changes are accumulative and have lethal effects on bacterial metabolism (Hern andez Garc ıa 2011). Therefore, as an additional safety feature, most manufacturers pack and store porcine SDBP at room temperature (>20°C) for at least 14 days before release for sale. These storage conditions have been demonstrated as effective to inactivate certain pathogens susceptible to dry environments and mild temperatures, such as PRRSV, PEDV and coronaviruses in general (Pujols and Segal es 2014; Sampedro et al. 2015) . The present study showed that S. choleraesuis and S. typhimurium did not survive in dried samples of plasma stored for 15 days after production at 4Á0 AE 3Á0°C or 23Á0 AE 0Á3°C, regardless of the outlet temperature used during drying or the postdrying residence time. Under the conditions of this study, the combinations of spray-drying and RT followed by postdrying storage at 4Á0 AE 3Á0°C or 23Á0 AE 0Á3°C for 15 days were effective for eliminating detectable viable bacteria count of the two Salmonella spp. strains studied. Salmonella choleraesuis (ref.: UMI-UAB 46429) and S. typhimurium (ref.: UMI-UAB 46450) strains were provided by the UMI-UAB (Veterinary School, Infectious Diseases Unit, Universitat Aut onoma de Barcelona, Spain). Inocula of both Salmonella spp. strains were prepared separately, growing one colony of each bacterium in TSA plates. After 24 h of growth at 37°C, bacteria were collected with a Kolle handle and resuspended in 10 ml PBS. Commercial spray-dried porcine plasma (SDPP; AP820P Lot # Y630962-357, APC Europe S.L., Granollers, Spain) was sterilized by c-cobalt-60 irradiation at 10 kGy (Aragogamma S.A., Les Franqueses del Vall es, Barcelona, Spain) to eliminate any potential bacterial contamination. The c-irradiated SDPP was diluted 1/10 in sterile distilled water (0Á6 kg SDPP + 6 kg of water) to obtain 6Á6 kg of liquid plasma containing around 8Á5% solids. After solubilization, liquid plasma was passed through a sterile tissue to eliminate any insoluble material. Three 2 kg aliquots were obtained from the 6Á6 kg of diluted plasma for spray-drying. A 10-ml inoculum of each bacterium containing around 10 10 -10 12 CFU ml À1 was prepared and used to inoculate each 2Á0 kg aliquot of plasma to achieve a minimum final titre of approximately 10 8 -10 10 CFU ml À1 . This procedure was conducted in triplicate for each bacterium and was done in a sterile biological safety cabinet to avoid external contamination. Two kilograms of resuspended SDPP (8Á60 AE 0Á01% solids) were inoculated with 10 ml of either the S. choleraesuis or the S. typhimurium isolates. From each aliquot of 2 kg of inoculated plasma, two bottles of 1 kg were obtained and one bottle was spray-dried at an inlet temperature of 200 AE 5°C and an outlet temperature of 80 AE 1°C and the other 1 kg bottle was spray-dried at the same inlet temperature with an outlet temperature of 71 AE 1°C. Before drying the inoculated plasma, the spray-dryer was stabilized with water followed by noninoculated plasma to achieve the combination of inlet and outlet temperatures of interest B€ uchi Labortechnik, Switzerland) . All inlet and outlet temperature combinations were performed in triplicate. Air flow through the column was set at 20-27 m 3 h À1 at 20°C. Estimated dwell time was <1 s. Before spray-drying, each inoculated bottle was sampled for bacterial plate count and solids analysis. Once SDPP was obtained at the two designated outlet temperatures, each dried spiked sample was distributed in 27 glass tubes (0Á5 cm length; inner diameter of 8 mm) containing 0Á5 g of product. Three tubes were immediately seeded on TSA plates for bacterial count. Three samples were immediately stored at room temperature (23Á0 AE 0Á3°C) and 3 more samples were immediately stored at refrigerated temperature (4Á0 AE 3Á0°C) for 15 days, and then analysed for bacterial count. Particle residence time (RT) in a laboratory spray-dryer is typically <1 s and particles cool very rapidly, whereas commercial dryers have a RT ranging from 30-60 s thus particles have an extended time of heat exposure. To simulate the longer RT typical of commercial dryers, 9 dried samples kept in sealed glass tubes were placed in a water bath set at 89-91°C for a RT of 30 s (actual temperature of the powder sample was 70Á4°C) and 9 more samples were held for a RT of 60 s (actual temperature of the powder sample was 80Á7°C). Upon completion of each RT, three tubes of samples held at either 30 or 60 s RT were stored at room (23Á0 AE 0Á3°C) or refrigerated (4Á0 AE 3Á0°C) temperature for 15 days before being analysed for bacterial count. The study design is summarized in Fig. 3 . These procedures were conducted in triplicate for each Salmonella strain. Bacterial count was done on TSA plates in triplicate for both liquid and dried samples. Each tube containing 0Á5 g of dried sample was resuspended in sterile water at 1:9 ratio. From this resuspension, 0Á1 ml was seeded in TSA agar for 24 h at 37°C. The colony counts were done following the ISO 7218:2007 guidelines. Results were expressed as a log 10 g À1 of solids using the equation: log 10 g À1 = log 10 (CFU/ml/[(% solid content of resuspended sample)/100]. Liquid inoculated plasma samples were analysed immediately after inoculation but also during an 8 h-period after inoculation to determine if the liquid plasma had an effect on reducing Salmonella spp. survival independently of the spray-drying effect. The liquid samples were maintained at 4Á0 AE 3Á0°C during this period and analysed for every 2 h. Liquid and spray-dried samples were analysed for dry matter (AOAC method 925Á45) to allow expression of the microbial inactivation results by grams of solids. Data were expressed by means of Log 10 values and standard deviations of three independent experimental batches. Experimental data were analysed as a 2 9 3 factorial arrangement of treatments using PROC GLM of SAS (SAS Institute. Cary, NC). Independent factors were outlet temperature (80 vs 71°C) and residence time (0, 30 or 60 s). Least square means were reported and differences at P < 0Á05 were considered significant. The use of blood and derived products as food additives Non-typhoidal Salmonella infections in pigs: a closer look at epidemiology, pathogenesis and control Salmonella enterica Serotype Choleraesuis: epidemiology, pathogenesis, clinical disease, and treatment Stabilization of dry phospholipid bilayers and proteins by sugars Powder characteristics of proteins spray-dried from different spraydryers Characterization of antimicrobial-resistant phenotypes and genotypes among Salmonella enterica recovered from pigs on farms, from transport trucks, and from pigs after slaughter The spray-drying process is sufficient to inactivate infectious porcine epidemic diarrhea virus in plasma Influence of inoculation route on the carrier state of Salmonella choleraesuis in swine Review anhydrobiosis in bacteria: from physiology to applications Nontyphoidal salmonellosis Computational fluid dynamics (CFD) applications in spray drying of food products The inactivation of Bacillus plantarum Convective drying of bacteria. II. Factors influencing survival Porcine epidemic diarrhea virus RNA present in commercial spray-dried porcine plasma is not infectious to na€ ıve pigs Dehydration and thermal inactivation of Lactobacillus plantarum WCFS1: comparing single droplet drying to spray and freeze drying Establishing guidelines to retain viability of probiotics during spray drying Spray dried plasma as an alternative to antibiotics in piglet feeds, mode of action and biosafety Bactericidal effect of the spray-drying system for animal plasma on two different E. coli animal strains Efficacy of spray-drying to reduce infectivity of pseudorabies and porcine reproductive and respiratory syndrome (PRRS) viruses and seroconversion in pigs fed diets containing spray-dried animal plasma Neutralizing antibodies against porcine circovirus type 2 in liquid pooled plasma contribute to the biosafety of commercially manufactured spray-dried porcine plasma Survivability of porcine epidemic diarrhea virus (PEDV) in bovine plasma submitted to spray drying processing and held at different time by temperature storage conditions Lack of transmission of porcine circovirus type 2 to weanling pigs by feeding them spray-dried porcine plasma Commercial spray-dried porcine plasma does not transmit porcine circovirus type 2 in weaned pigs challenged with porcine reproductive and respiratory syndrome virus No transmission of hepatitis E virus in pigs fed diets containing commercial spray-dried porcine plasma: a retrospective study of samples from several swine trials Risk assessment of feed ingredients of porcine orging as vehicles for transmission of Porcine Epidemic Diarrhea Virus (PEDv) Commercially produced spray-dried porcine plasma contains increased concentrations of porcine circovirus type 2 DNA but does not transmit porcine circovirus type 2 when fed to naive pigs CFD Simulation of Spray Drying of Food Products Spray dried animal plasma as an alternative to antibiotics in weanling pigs Role of neutralizing antibodies in controlling simian foamy virus transmission and infection This study was partly supported by Secretaria de Universitats i Recerca del Departament d'Economia i Coneixement de la Generalitat de Catalunya (2014 DI 066). The funding from CERCA Programme (Generalitat de Catalunya) to IRTA was also acknowledged. The authors are deeply indebted to Dr. Ignacio Badiola for his suggestions and recommendations during the design of this study. Elena Bl azquez, Carmen Rodr ıguez, Jes us R odenas, Marc Sol a-Gin es and Javier Polo are employed by APC Europe, S.L.U. Joy Campbell and Javier Polo are employed by APC Inc. Both companies manufacture and sell spraydried animal plasma. Joan Pujols, Ana P erez de Rozas and Joaquim Segal es declare no conflicts of interest.