key: cord-0915590-1bgfjlth authors: Shin, Hyoshim; Lee, Seungjun; Widyasari, Kristin; Yi, Jongyoun; Bae, Eunsin; Kim, Sunjoo title: Performance evaluation of STANDARD Q COVID‐19 Ag home test for the diagnosis of COVID‐19 during early symptom onset date: 2022-04-20 journal: J Clin Lab Anal DOI: 10.1002/jcla.24410 sha: 52a61b7e720e298cbed756ead403597532bce511 doc_id: 915590 cord_uid: 1bgfjlth BACKGROUND: Surveillance and control of SARS‐CoV‐2 outbreak through gold standard detection, that is, real‐time polymerase chain reaction (RT‐PCR), become a great obstacle, especially in overwhelming outbreaks. In this study, we aimed to analyze the performance of rapid antigen home test (RAHT) as an alternative detection method compared with RT‐PCR. METHODS: In total, 79 COVID‐19‐positive and 217 COVID‐19‐negative patients confirmed by RT‐PCR were enrolled in this study. A duration from symptom onset to COVID‐19 confirmation of <5 days was considered a recruiting criterion for COVID‐19‐positive cases. A nasal cavity specimen was collected for the RAHT, and a nasopharyngeal swab specimen was collected for RT‐PCR. RESULTS: Sensitivity of the STANDARD Q COVID‐19 Ag Home Test (SD Biosensor, Korea), compared with RT‐PCR, was 94.94% (75/79) (95% [confidence interval] CI, 87.54%–98.60%), and specificity was 100%. Sensitivity was significantly higher in symptomatic patients (98.00%) than in asymptomatic (89.66%) patients (p‐value = 0.03). There was no difference in sensitivity according to the duration of symptom onset to confirmation (100% for 0–2 days and 96.97% for 3–5 days, respectively) (p‐value = 1.00). The RAHT detected all 51 COVID‐19 patients whose Ct values were ≤25 (100%), whereas sensitivity was 73.33% (11/15) among patients with Ct values >25 (p‐value = 0.01). CONCLUSION: The RAHT showed an excellent sensitivity for COVID‐19‐confirmed cases, especially for those with symptoms. There was a decrease in sensitivity when the Ct value is over 25, indicating that RAHT screening may be useful during the early phase of symptom onset, when the viral numbers are higher and it is more transmissible. Coronavirus disease 2019 (COVID- 19) was first reported in 2019 after a novel coronavirus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), was identified. Since its first discovery, SARS-CoV-2 has caused serious public health and economic concerns worldwide. The national strategy to combat COVID-19 is based on rapid detection, isolation, contact tracing, and patient management to prevent the transmission of SARS-CoV-2. 1 The detection of SARS-CoV-2 is the first step in assessing cases. It is also vital to detect SARS-CoV-2 as early as possible since SARS-CoV-2 may be coinfected with other microbial pathogens. 2 Infection with SARS-CoV-2 may alter the human's microbiota, which further may affect the immune system. 3 Based on a systematic review, 4 a high prevalence of pathogenic microorganism was found among COVID -19 patients. Thus, a delayed detection of SARS-CoV-2 could also result in increased mortality and morbidity due to the possibility of coinfection of SARS-CoV-2 and other pathogens. A molecular diagnostic, that is, real-time polymerase chain reaction (RT-PCR) that has been widely used as a gold standard of detection depends on the sampling locations, probes of SARS-CoV-2 gene sequence that is used as a target for detection and days of symptom onset. 5 Therefore, considering that RT-PCR is complex, expensive, and slow to deliver, 6 an alternative diagnostic method that is more user-friendly and cost-effective, which permits new cases to be isolated immediately, is in high demand. The point-of-care (POC) diagnostic platform, which can provide results at the point of care instead of samples being sent to the laboratory, has been widely used and accepted as part of the control strategy for the restriction of COVID-19. 7 A lateral flow assay such as the antigen test is one of the most popular POC diagnostic platforms that have been widely studied and evidently plays some role in the restriction of COVID-19 when a molecular diagnosis is difficult to perform. 7, 8 Antigen tests (immunoassays) detect the presence of a specific viral antigen, mostly nucleocapsid protein, which strongly implies transmissible viral infection. 9,10 Antigen tests have a rapid turnaround time, whereby test results can usually be delivered within 5-30 min. 11 Nevertheless, antigen tests for the diagnosis of SARS-CoV-2 are generally less sensitive than RT-PCR. 12 However, RT-PCR, considered as the gold standard for SARS-CoV-2 diagnosis, can cause carryover contamination, requires expensive equipment and well-trained technicians, and is costly to perform, which are challenges in resource-poor countries. 13, 14 In particular, molecular diagnosis takes several hours or a few days to obtain results and hampers the suspected cases' immediate response. 15 In such situations where COVID-19 is overwhelming and medical personnel or diagnostic equipment is in short supply, a rapid diagnostic platform such as a rapid antigen home test (RAHT) could be considered a supplemental strategy. Compared with conventional rapid antigen tests, a RAHT does not require personal precaution equipment, medical personnel, or visits to screening centers or hospitals. An RAHT is easy to use and cheaper than RT-PCR. The RAHT may be used for school, business centers, or large gatherings to ensure safety from COVID-19 transmission when the virus is widespread. The RAHT would also be helpful for, for example, those with disabilities, those in remote areas, or those in prisons, where medical services are difficult to access. In addition, those RAHT can be used at the point of care or at home. The Centers for Disease Control and Prevention (CDC) and World Health Organization (WHO) announced guidance for the optimal usage of antigen testing for SARS-CoV-2, 16 but not for those RAHT. There has been no report on the performance of the RAHT in Korea yet. Therefore, we evaluated the diagnostic performance of the RAHT with a consideration of clinical characteristics, including the presence of symptoms, days after the symptom onset, and the Ct value of the RT-PCR. This study was conducted among 79 SARS-CoV-2-infected patients The specimens for detection of SARS-CoV-2 were self-collected by each participant after blowing the nose and inserting a flocked swab into nostril at a depth of 1 to 2 cm and rotating three times against the surface of the nasal cavity, according to the manufacturer's manual. In this study, the RT-PCR-positive tested group included patients with mild symptoms or without symptoms. Among them, about a third (1/3) were asymptomatic. The negative group included patients who visited GNUCH but the RT-PCR test result came back negative. In addition, patients who took antiviral drugs for COVID-19 were excluded. Healthcare workers or experts who had experience for in vitro diagnostic equipment, such as glucometer, were also excluded from the study. The STANDARD Q COVID-19 Ag Home Test (SD Biosensor, Suwon, Korea) is an RAHT that qualitatively detects the presence of the SARS-CoV-2 nucleocapsid protein in human nasal specimens via chromatographic immunoassay. The STANDARD Q COVID-19 Ag Home Test, hereinafter referred to as the SD Q home test, is a detection kit that allows the entire procedure to be conducted at home. The SD Q home test cassette is coated with two lines, that is, a control line (C) and a test line (T). When the specimen contains SARS-CoV-2, the antigens will bind to the SARS-CoV-2-specific antibodies coated on the test line region (T), which later will generate a colored line on the test strip. If the specimen does not contain SARS-CoV-2 antigens, a colored line will not appear in the T region. The result was interpreted as positive if two lines appeared on the nitrocellulose membrane. To compare the sensitivity analysis of the SD Q home test, RT-PCR assay for the qualitative detection of SARS-CoV-2 nucleic acids was Fisher's exact test 17 We performed all statistical analyses using the SAS software ver. 9.4 (SAS Institute Inc., Cary, NC) and R version 3.6.3 (R Foundation for Statistical Computing, Vienna, Austria). The overall sensitivity of the SD Q home test was 94.94% (75/79) (95% CI, 87.54%-98.60%), with total specificity was 100% compared with the RT-PCR (217/217), the positive predictive value (PPV) was 100% and the negative predictive value (NPV) was 98.19% (Table 1) . Furthermore, we found that the sensitivity of the SD Q home test in the symptomatic patients (98.00%) was significantly higher than in the asymptomatic patients (89.66%) (pvalue = 0.03) ( Table 2 ). Evaluation on the sensitivity of SD Q home test according to the DSO demonstrated that there is no significant difference in sensitivity between a test conducted at 0-2 days (17/17, 100%) and one conducted at 3-5 days (32/33, 96.97%) after symptom onset (pvalue = 1.00), suggesting that 0-5 DSO is the optimal time to perform an RAHT. The sensitivity of SD Q home test was evaluated by restricting Ct values of RT-PCR-positive diagnosed specimens into three groups, that is ≤20, 20 < Ct ≤25, and 25 < Ct. The sensitivity of the SD Q home test was up to 100% for the specimens obtained from patients where Ct ≤20 (51/51) or 20 < Ct≤25 (13/13). For patients where 25