PRESENTED FRA17KZ.IXT ZITSTITUTE, BY FFIANKLIN I INSTITUTE UBffARr PHILADELPHIA Class Accession y £2. REFERENCE obtained the sanction of the Committee. The second class shall include those books intended for circulation. Article VI. — The Secretary shall have authority to loan to Members and to holders of second class stock, any work belonging to the skcoxd CLASS, subject to the following regulations : Section 1. — No individual shall be permitted to have more than two hooks out at one time, without a written permission, signed by at least two members of the Library Committe ; nor shall a book be kept out more than two weeks ; bat if no one has applied for it, the former bor- rower may renew the loan. Should any person have applied for it, the latter shall have the preference. Section 2. — A fine of ten cents per week shall be exacted for the detention of a book beyond the limited time ; and if a book be not re- turned within three months it shall be deemed lost, and the borrower shall, in addition to his fines, forfeit its value. Section 3. — Should any book be returned injured, the borrower shall pay for the injury, or replace the book, as the Library Committee may direct ; and if one or more books, belonging to a set or sets, be lost, the borrower shall replace them or make full restitution. Article VII. — Any person removing from the Hall, without permis- sion from the proper authorities, any book, newspaper or other property in charge of the Library Committee, shall be reported to the Committee, who may inflict any fine not exceeding twenty-five dollars. Article VIII. — No member or holder of second class stock, whose annual contribution for the current year shall be unpaid or who is in arrears for fines, shall be entitled to the privileges of the Library or Reading Room. Article IX. — If any member or holder of second class stock, shall refuse or neglect to comply with the foregoing rules, it shall be the duty of the Secretary to report him to the Committee on the Library. Article X. — Any Member or holder of second class stock, detected in mutilating the newspapers, pamphlets or books belonging to the Insti- tute shall be deprived of his right of membership, and the name of the offender shall be made public. THE COMPENDIUMHr^- Y. ■OF- Architectural Sheet-Metal Work, PROFUSELY ILLUSTRATED, EMBRACING RULES & DIRECTIONS FOR ESTIMATES, ITEMS OF COST, NOMENCLATURE, Tables of Brackets, Modillions, Dental^, Trusses, Stop Blocks, Frieze Pieces, &c., ARCHITECT'S SPECIFICATION, Tables of Tin Roofing, Galvanized Iron, etc., etc. TO WHICH IS ADDED THE EXEMPLAR OF ARCHITECTURAL SHEET-METAL WORK, Containing Details of the Centennial Buildings, and other important Sheet-Metal Work ; DESIGNS AND PRICES OF ARCHITECTURAL ORNAMENTS, As manufactured for the Trade by the Kittredge Cornice & Ornament Co.; and a CATALOGUE OF CORNICES, WINDOW CAPS, MOULDINGS, ETC., As manufactured for the Trade by the Kittredge Cornice & Ornament Co. The whole Supplemented by a full Index and Table of Contenls. SALEM, OHIO: THE KITTREDGE CORNICE & ORNAMExNT CO. 1 8 7 S . me Entered according to Act of Congress in the year 1876, by the K I T T R E D 0 E CORNICE & ORNAMENT COMPANY, in the office of the Librarian of Congress at Washington. ROBISON, SAVAGE &. CO., PRS-, CLEVELAND. O. ERRATA. The following typographical errors and omissions are to be noted : J^^J/php 41 90 24 57 IS 24 6 7J 91 25 5S 18 25 6 103 92 25 50 18 26 7 22 93 25 60 19 27 7 53 91 26 2 33 64 61 19 28 7 84 95 26 62 19 29 8 8 96 ',6 63 19 3» 8 31 97 26 95 14 64 20 31 8 6> 98 27 65 20 32 8 96 99 27 45 76 Gi) 20 33 9 15 100 27 67 21 34 46 Entered according to Act of Congress, In the year 1875, by the Kittredge Cornice and Ornament Company, in the office of the Librarian of Congress at Washington. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 17 COST OP TIN FOR 14 x 20 FLAT-SEAM ROOFING. TABLE, showing the Cost per Square, and per Square Foot, of 14- x 20 Tin, for Flat- Seam Roofing, loith Tin at any price, from %6.00 to $20,00 pier Box; Var iations being 25 cents per Box at each advance. Note.— First column contains Price per Box of Tin; second column shows Cost of Tin per Square (100 square feet) of Surface; third column shows Cost of Tin per Square Foot of Surface. SiZE OF Sheet -Before Edging 14x20 inches. After Edging 13x19 inches. Square Inches per Sheet exposed 247. Sheets per box 112. When Tix is worth ? 6 .00 per Box, 14x20 Flat Koof Costs $ 3.12 per Square, or, .0312 PER Square Foot. 6.25 3.25 .0325 6.50 3.38 .0338 6.75 3.51 .0351 7.00 3.64 .0364 7.25 3.77 .0377 7.50 3.90 .0390 7.75 4.03 .0403 8.00 4.16 .0416 8.25 4.29 .0429 8.50 4.42 .0442 8.75 4.55 .0455 9.00 4.68 .0468 9.25 4.81 .0481 9.50 4.94 .0494 9.75 5.07 .0507 10.00 5.20 .0520 10.25 5.33 .0533 10.50 5.46 .0546 10.75 5.59 .0559 11.00 5.72 .0572 11.25 5.85 .0585 11.50 5.98 .0598 11 .75 6.11 0611 12.00 6.24 ^0624 12.25 6.37 .0637 12.50 6.50 .0650 12.75 6.63 .0663 13.00 6.76 .0676 13.25 6.89 .0689 13.50 7.02 .0702 13.75 7.15 .0715 14.00 7.28 .0728 14.25 7.41 .0741 14.50 7.54 .0754 14.75 7.67 .0707 15.00 7.80 .0780 15 25 7.93 .1793 15.51 8.06 .1816 15.75 8.19 .1819 16.11 8.32 .1832 16.25 8.45 .1845 16.51 8.58 .1858 16.75 8.71 .1871 17.11 .. 8.84 .1884 17.25 8.97 .1897 17.51 9.11 .1911 17.75 9.23 .1923 18.11 9.36 .1936 18.25 9.49 .1949 18.51 9.62 .1962 .. 18.75 9.76 .1976 19.11 9.89 .1989 10 25 11.12 .1112 19 51 11.15 .1115 19.75 11.28 .1128 21.11 11.41 .1141 Entered according to Act of Congress in the year 1875, by the Kittredge Cornice and Ornament Company, in the office of the Librarian of Congress at Washington. 18 THE KITTREDGE COEKICE AND ORXAMEIsTT COMPANY. COST OF TIN FOR 14 x 20 STANDING-SEAM TIN ROOFING. TABLE, sJmuing the Cost per Square mid per Square Foot of IJf x 20 Tin for Standing-Seam Roofing, until Tin at any Price from $6.00 to $20.00 per Box, Variations being 25 Cents per Box at each advance. Note.— First column contains Price per Box of Tin ; second column shows Cost of Tin per Square (100 square feet) of Surface ; and third column shows Cost of Tin per Square Foot of Surface. Size op Sheet— Before Working 14 X 20 inches. After Working. 13 X Vl% inches Square Inches exposed 230 Sheets per Box 112. When Tin is worth $ o .00 per Box, 14x^^0 Standing-Seam Roof COSTS % 3 .34 per Square, Ok, .0334 per Square Foot. A OK 'i HQ o .4o .0348 lA. Kfl 3 . 62 .0862 D . (0 o . io .0376 n c\(\ o . yo .0390 i 410 4 . 03 .0403 7 . 50 4 17 .0417 I . to A 01 4 .ol .0431 s no 4 .45 .0445 Q O . 4 59 .0459 O . OU 4 . to .0473 cS . iO 4 . 87 .0487 O f\f\ 5 .01 .0501 5 .15 .0515 y . ou 5 .29 .0529 9 . 75 5 .43 .0543 lU UU 5 . 57 .0557 1 1\ Ol^ iu . ^$^Disc't < par Sq. Ft. .117 .43375 .117 .351 .117 .31443 .117 .27787 .117 .24131 .117 .20475 .12675 .19012 .1267.'^ .16635 .12675 .15051 .12675 .13457 .1365 .1365 .1365 .12795 .14625 .12796 .156 .12675 .17.55 .13162 " 5 ^ " j per lb. . . per Sq. Ft. .114 .4275 .114 .342 .114 .30637 .114 .2775 .114 .23512 .114 .1995 .1235 .18525 .1235 .15209 .1235 .14565 .1235 .13121 .133 .133 .133 .12458 .1425 .12458 .152 .1235 .171 .12825 p9r Sq. Ft. .111 .41625 .111 .333 .111 .29831 .111 .26362 .111 .22893 .111 .19425 .12025 .18037 .12025 .15782 .12025 .14279 .12025 .12775 .1295 .1295 .1295 .1214 .13875 .1214 .148 .12025 .1665 .12487 " 10 5? " ] por Sq. Ft .108 .405 .108 .342 .ir8 .29025 .108 .2565 .108 .22275 .108 .189 .117 .1755 .117 .15356 .117 .13893 .117 .12431 .126 .126 .126 .11812 .135 .11812 .144 .117 .162 .1215 1 per Sq. Ft .105 .39375 .105 .315 .105 .23218 .105 .24937 .105 .21656 .105 .18375 .1137^ .17062 .11375 .14929 .11.375 .13507 .11375 .12085 .1225 .1225 .1225 .11484 .13125 .11484 .14 .11375 .1575 .11812 " lb " j per Sq. Ft. .102 .3825 .W)2 .306 .102 .27412 .102 .24225 .102 .21037 .102 .1785 .1105 .16575 .1105 .14503 .1105 .13121 .1105 .11740 .119 .119 .119 .11155 .1275 .11156 .136 .1105 .1.53 .11475 per Sq, Ft. .099 .37125 .099 .297 .099 .26606 .099 .23512 .099 .20418 .099 .17325 .10725 .16087 .10725 .14076 .10725 .12735 .10725 .11395 .1155 .1155 .11.55 .10828 .12375 .10828 .132 .10725 .1485 .11137 " 20 % " J per Sq. Ft, .096 .36 .096 .288 .096 .258 .096 .228 .096 .198 .096 .158 .104 .156 .104 .1355 .104 .1235 .104 .1105 .112 .112 .112 .105 .12 .105 .128 .104 .144 .108 per Sq. Ft. .093 .34875 .093 .279 .093 .24993 .093 .22087 .093 .19181 .093 .15275 .10075 .15112 .10075 .13223 .10075 .11964 .10075 .10704 .1085 .1085 .1085 .10171 .11625 .10171 .124 .10075 .1395 .10452 " 2o % " j psrSq.Ft. .09 .3375 .09 .27 .09 .24187 .09 .21375 .09 .18552 .09 .1575 .0975 .14625 .0975 .12795 .0975 .11578 .0975 .10359 .1^5 .105 .105 .09843 .1125 .09843 .12 .0975 .135 .10125 i " 27 1^;^ ] per Sq. Ft. .087 .32625 .087 .261 .087 .23381 .057 .20662 .087 .17943 .087 .15225 .09425 .14137 .09425 .12370 .094?5 .11192 .r9425 .10014 .1015 .1015 .1015 .09515 .10875 .09515 .116 .09425 .1305 09787 ( " 80 ^ \ perSq. Ft. .084 .315 .084 .252 .0^1 .22575 .084 .1995 .084 .17325 .084 .147 .091 .1365 ,091 .11943 .091 .10806 .r9l .09658 .098 .098 .098 .09187 .105 .09187 .112 .091 .126 .0945 I I perSq. Ft. .081 .30375 .081 .243 .081 .21768 .081 .19237 .081 .16706 .081 .14175 .08775 .13162 „08775 .11517 .08775 ,1042 .08775 .09323 .0945 .0945 .0945 .08859 .10125 .08859 .108 .08775 .1215 .09112 per Sq. Ft. .08 .30 .08 .24 .08 .215 .08 .19 .08 .155 .08 .14 .08666 .13 .08666 .11375 .08666 .10291 .08666 .09208 .09333 .09333 .09333 .0875 .10 .0875 .10866 .08656 .12 .09 i " "5 i " j perSq. Ft. .078 .2925 .078 .234 .078 .20962 .078 .18525 .078 .15087 .078 .1355 .0845 .12575 .0845 .11090 .0845 .10034 .0845 .08978 .091 .091 .091 .08531 .0975 .08531 .104 .0845 .117 .08775 " 37;<^ ■ per Sq. Ft. .073 .28125 .075 .225 .075 .20155 .075 .17812 .075 .15468 .075 .13125 .08125 .12187 .08125 .10564 .08125 .09548 .08125 .08532 .0875 .0876 .0875 .03203 .09375 .08203 .10 .08125 .1125 .08437 t «' 40 fc " ; per Sq. Ft. .072 .27 .072 .216 .072 .1935 .072 .171 .072 .1485 .072 .125 .078 .117 .078 .10237 .078 .09262 .078 .08287 .084 .084 .084 .07875 .09 .07875 .096 .078 .108 .081 per S). . . per Sq. Ft- .069 .25875 .069 .207 .069 .18543 .069 .16387 .069 .14231 .069 .12075 .07475 .11212 .07475 .09i^l .07475 .08876 .07475 .07942 .0805 .0805 '0805 .07546 .08625 .07546 .092 .07475 .10.35 .07762 " 45 % " per R). . . per Sq. Ft. .066 .2475 .066 .198 .066 .17737 .066 .15575 .066 .13512 .066 .1155 .0715 .10725 .0715 .09384 .0715 .08490 .0715 .07596 .077 .077 .077 .07218 .0825 .07218 .088 .0715 .099 .07425 " 473^^ " per lb. . . per Sq. Ft. 063 .23525 063 ;i89 063 .15931 063 .14952 063 .12993 063 .11025 06825 .10237 06825 .08957 06825 .08104 06825 .07251 0735 !0735 0735 !0589 07875 .0689 084 .06825 0945 ."07087 " 50 % " per lb. . . per Sq. Ft. .06 .225 .06 .18 .06 .16125 .06 .1425 .06 .12375 .06 .105 .065 .0975 .065 .08531 .065 .07718 •065 .06906 .07 .07 .07 .06552 .075 .05552 .08 055 .09 .0675 " 52X^ " per lb. . . , perSq. Ft. .0.57 .21375 .057 .171 .057 .15318 .057 .13537 .057 .11755 .0.57 .09975 .06175 .0925^ .06175 .08104 .00175 .07332 .06175 .06550 .0665 .0565 .0665 .06234 .07125 .05234 .076 .06175 .08.^5 .05412 " 55 % " per R). . . perSq.Ft. .054 .2025 .054 .162 .054 .14512 .054 .12825 .054 .11137 .054 .0945 .0^85 .08775 .0585 .07578 .0.585 .06946 .0585 .05215 .063 .063 .063 .05905 .0675 .05906 .072 .0585 .081 .06075 " 67K% " per lb. . . , per Sq. Ft. .051 .19125 .0.51 .153 .051 .13706 .0.51 .12112 .051 .10518 .0.51 .08925 .05.525 .08237 .05525 .07251 .05525 .0656 .05.525 .05870 .0595 .0595 .0595 .05578 .06375 .05578 .C68 .05525 .0765 .05737 " 60 fo " I per Tb. . . 1 perSq.Ft. .048 .18 .048 .144 .048 .129 .048 .114 .048 .099 .048 .084 .052 .078 .052 .05825 .052 .06175 .0.52 .05525 .056 .056 .0.56 .0525 .06 .0525 .064 .052 .072 .054 Entered according to Act of Congress, In the year 1875, by the Kittredge Cornice and Ornament Company, in the office of the Librarian of Congress, at Washington. 22 THE KITTREDGE CORKICE AXD OKXAMENT COMPANY. SHEET-METAL MOULDINGS. The following tables for Gauges Nos. 24, 26 and 27, cover the usual run of straight Sheet- Metal Mouldings in use, A memorandum of extras accompanies each table. Before making Sheet-Metal work, of whatever kind or description, (save ornaments and other die work,) and whether in large or small quantities, certain preliminary steps are necessary. Drawings must be made, stretchouts obtained, machinery adjusted, etc. All this is common to each lot of work of any given design executed, whether it be an order for eight feet or eight hundred feet. It is an expense which cannot be estimated in the price of work per foot or per piece, because in amount it is the same on a small order as on a large one. It is manifestly pro- per, therefor, to make a special arbitrary allowance for such items, which is done in the follow- ing tables and throughout this book, under the name of Patterns. Ko explanation is necessary as to the item of Miters, It is a reasonable charge for extra cost occurring at irregular intervals, and one which cannot, therefore, be included in the price per foot. Curved Mouldings vary so much in sweep, radius, profile, and other important particulars, that a general formula by which to make estimates upon them, is almost out of the question. In another portion of this book (refer to Index) we give some prices limited to particulars, profiles and special constructions. It has been customary with some to estimate curved mouldings at from one and one-half to three times the price of straight moulding:s, of corresponding gauge and character. While such a rule in very many cases is sufficient for all practical purposes, it has no foundation in reason, and is liable to lead to serious errors. THE KITTKEDGE COKJ^ICE AiN^D OBJiTAMENT COMPAKY. 23 TABLE FOR ESTIMATING GALVANIZED-IRON MOULDINGS. GAUGE NUMBER TWENTY-FOUR. This Tahle is calculated for the ordinary forms of the different description's named, and for Mouldings in eight-foot leugtl;s Short lengths and exceptional profiles are subject to special prices. The figures represent the price per foot. « o Ckown-Moulding and Fascia, joined. 1 p. K a < Oh '6 c P w, a o ■< >^ Ph 3 o W u 0 o 3 pi) •a < P3 » Ph < PL| a; p o 'k o O o 'A 5 p O p < « O o ]h o S C p4 p O 1-1 H « 1 1 Dentil-Couese and Bed-Moulding, joined. « * a "3 "7 r/3 w o 9 « Q « o o o !^ s o 'S c. 5 o a S o s 6 g S p p ^ o o 5 p o P K Flat Iron— to width, no bends. Ceimped Iron— to width, no bends. M B i s ft 1 p H Joining each Miter. Complete Miters— each. 5 in. .098 .(m .093 .094 094 .08-5 .003 .0885 .09=! .1003 .084 .094 .094 .1093 .082 .092 5 in. .30 .03 .12 .15 6 .1136 .0986 .1086 .1090 .1096 .1041 1136 .1041 .1136 .1159 .0996 .1090 lOlH) .1249 .0976 .1076 6 .30 ,03 .12 .15 7 .1292 .1142 .1242 .1252 .1252 .1197 .1292 .1197 .1292 .1315 .1152 1252 .1252 .1405 .1132 12.32 7 .30 ,04 .15 .19 8 .1448 .1298 .1398 .1408 .1408 .1353 .1448 .1353 ■1448 .1471 .13'J8 .1408 .141 ,'8 .1.561 .1288 .1388 8 .30 .04 .15 .19 9 .1604 14- 4 .1554 .1564 .1564 .1509 .1604 .1509 .1604 .1627 .1464 .1564 1E64 .1717 .1444 .1.544 9 .30 .05 .20 .25 10 .1760 .1610 .1710 .1720 .1720 .1665 .1760 .1665 .1760 .1783 .1620 .1720 .1720 .1873 .1600 .1700 10 .30 ,05 ,20 .25 11 1916 .1766 .1866 .1876 .1876 .1821 .1916 .1821 .1916 .1939 .1776 .1876 .1876 .2029 .1756 .1856 11 .40 .06 ,25 .31 12 2072 .1922 .2022 .2032 .2032 .1917 .2072 .1977 .2072 .2095 .1932 .2032 .2032 .2185 .1912 .1912 12 .40 ,06 ,25 .31 13 .2228 .2078 .2178 .2188 .2188 .2133 .2228 .2133 .2228 .2251 .2088 .2188 .2188 .2341 .2068 .2168 13 ,40 ,07 .30 .37 14. .2381 .2234 .2334 .2334 .2344 .2289 .2384 .2289 .2384 .2407 .2244 ,2344 .2344 .2497 .2224 .2324 14 .40 .07 .30 .37 15, .2540 .2390 .249 J .250C 25O0 .2445 2540 .2445 .2540 .2563 .2400 .2500 .2500 .2653 .2380 .2480 i5 .40 ,08 .30 .38 16: .2691 .2540 .2646 .2656 .2656 .261)1 .2696 .2601 .2696 .2719 .2556 .2856 .2656 .2809 .2536 .2636 16 .50 ,09 ,30 .38 17; .2852; .2702 .2802 .2812 .2812 .2757 2852 .2757 .2852 .2875 .2712 .2812 .2812 .2966 .2692 .2792 17 .50 ,09 .35 .44 18 3008 .2858 .2958 .2968 .2968 .2913 .3008 .2913 .3008 .3031 .2868 .2968 .296e .3121 .2818 2948 18 .50 ,09 .35 .44 19' 3164; 3014 .3114 .3124 .3124 .3069 .3164 .3%9 .3164 .3187 .3024 .3124 .3124 .3277 .3004 .3104 19 .50 ,10 ,40 .50 20 .3320 .3170 .3270 .328) .3?80 .3225 .3320 .3235 .3320 .3343 .3180 .3280 .3280 3433 ,.3100 .3260 20 .50 ,10 .40 .50 21 3476 .3326 .3426 .3436 .3436 .3381 .3476 .3381 .3476 .3499 .3336 .3436 .3436 .3,^89 .331C .3410 21 .60 .12 .45 .57 22 .3632 .3482 .3582 .3592 .3592 .3537 .3632 .3.537 .3732 .3655 .3492 .3.592 .3-92 .3745 .3472 .:-^.572 22 .60 ,12 .45 .57 23 .3788 .3638 .3758 .3748 .3748 .3593 .3788 .3693 .3788 .3811 .3648 .3748 .3748 .3901 .3628 .37? 8 23 .60 ,14 .50 .64 24 .3944 .3794 .3891 .39a4 .49')4 3849 .3914 .3849 .3941 .3967 .3804 .3904 .3904 .4057 .3784 .3884 24 .60 .14 .,50 .61 25 .4100 .3950 .4050 .4060 .406') .4005 .4l0f .4005 .4100 4123 .3960 .4060 .4^60 .4213 .394C .4040 25 .60 .16 .55 .71 26 .4256 .4106 .4206 4216 .4216 .4161 .4256 .4161 .42.56 .4279 .4110 .4216 .4216 .4369 .4096 .4196 26 .70 .16 .55 .71 27 .4412 .4262 .4362 .4372 .4372 .4317 .4412 .4317 .4412 .4435 .4272 .4372 .4372 .4525 .4252 .4352 27 .70 .18 .55 .73 28 29 .4568 .4118 .4518 .4528 .4.528 .4473 .4568 .4473 .4.568 .4591 .4428 .4528 .4528 .4681 .4408 .4^08 28 .70 ,18 .60 .78 .4724 .4574 .4674 .46^^ .4684 .4629 .4724 .4629 .4724 .4747 .4584 .4684 .4684 Ami ,4564 .4664 29 .70 ,20 .60 .80 30 .48301 .47 ?0 1 .48:30 .4^40 .4840 .4T85 .4880 .4785 ,4830 ,4903 ,4740 ,4840 .4840 .4993 .4720 .4820 30 .70 .20 .00 .80 THE KITTREDGE COEIS'ICE A^s^D ORN"AMENT COMPANY. 26 TABLE FOR ESTIMATING GALVANIZED-IBON MOULDINGS. GAUGE NUMBER TWENTY-SEVEN. This Table Is calculated for the ordinary forms of the different descriptions named, and for Mouldings in eight-foot lengths. Short lengths and exceptional profiles are subject to special prices. The figures represent the price per foot. ained. joined incd. , joined. EXTRAS. o _o w i o 13 ►J fl in » P O O i-q P o H \A fi P o o o 13 Hi fl a N r2 V ft a iz S fA tA 0 hi p o o I-! P O ^< K < hi P w o T o P3 H T 'A o P3 fl H m V E- e TTING EACH M: 1 w o <) fi H W P fl. 1^ K 1^ o c w o 3 « o B M 5 - (i93 0835 .093 0953 .0790 ,0890 ,0890 1043 .077 087 5 in. .30 .03 .12 .15 6 .1076 .0926 .1026 .1036 .10-!6 .0981 .1076 .0981 1076 .1099 .0936 .1036 ,1036 1189 .0916 ,1016 6 .30 .03 .12 .15 7 1222 .1072 1172 .1182 -1182 .1127 1222 .1127 .1222 .1215 .1082 .1182 ,1182 .1335 .1062 11C2 7 ,30 .04 .15 .19 8 .1368 .1218 .1318 .1328 .1328 .1273 .1368 .1273 .1368 .1391 .1228 ,1328 ,1328 .1481 .1208 1308 8 .30 .04 .15 .19 9 .1514 .1364 .1464 .1474 .1474 .1419 .1514 .1419 .1514 .1637 .1374 .1474 ,1474 .1627 .1354 .1454 9 .30 .05 .20 .25 10 .1660 .1510, .1610 .1620 .1620 .1565 .1660 .1565 ,1660 .1683 .1520 .1620 .1620 .1773 .1500 ,1600 10 .30 .05 .20 .25 11 .1806 16561 .1756 .1766 .1766 .1711 .ieo6 .1711 .1806 .1829 ,1666 .1766 ,1766 .1919 .1646 1746 11 .40 .06 .25 .31 12 1952 .1802 .1902 .1912 .1912 .1857 .1952 .1857 .1952 .1975 .1812 .1912 .1912 .2065 .1792 1892 12 .40 .06 .25 .31 13 .2098 .1948 2048 .2058 .2058 .2003 .2093 .2003 .2098 .2121 .1958 .2058 2058 ,2211 .1938 2038 13 .40 .07 .30 .37 H .2244 .20941.2194 .2204 .2204 .2149 .2244 .2149 .2244 .2267 .2104 .2204 2204 2357 ,2084 2184 U .40 .07 .30 .37 15 .2390 .22401.2340 .2350 .2350 .2^95 .2390 2295 ,2390 2413 .2250 .2350 2350 ,2503 2-230 2330 i5 .40 .08 .30 .38 16 .2536 2386' .2486 .2682' .2532 .2632 .2496 .2496 .2441 2536 .2441 .2536 2559 .2396 .2496 ,2496 .2649 .2376 .2476 16 ,50 .08 .30 ,38 17 .2642 .2642 .2587 .268-3 .2587 .2682 .2705 .2542 .2642 ,2642 .2795 .2522 2622 17 .50 .09 .35 .44 18 .2828 .26781 .2778 .2788 .2788 .2733 .28-28 .2733 .2828 .2851 .2688 .2788 ,2788 .2941 ,266b ,2788 18 .50 .09 .35 ,44 19 .2974'. 2824 . 2924 .2934 .2934 .2879 .2974 .2879 .2974 .2997 ,2834 .2934 ,2934 .3087 ,2814 ,2914 19 .50 .10 .40 .50 20 .3120 .2970 .3070 .8080 .3080 .3025 .3120 .3025 ,3120 .3143 ,2980 .3080 ,30.^0 3233 .2960 .3060 20 .50 .10 .40 .00 21 3266 .3116 3216 3226 3226 .3171 .3266 .3171 ,3266 .3289 3126 .3226 3226 .3379 ,3106 3206 21 ,60 .12 .45 ..57 22 .3412 3262 3362 3372 .3372 .3117 .3412 .3317 .3412 ,3558 3435 ,3272 .3372 .3372 .3525 .3252 .3352 22 ,60 .12 .45 .57 23 .3558 .3408 .3508 .3518 .3518 .3463 .3558 .3463 .3581 ,3418 .3518 ,3518 .3671 .3398 .2498 23 ,60 .14 50 .64 2i .3704 .3554 .3654 .3664 .3664 3609 3704 .3609 .3704 .3727 ,3564 ,3664 ,3664 .3817 ,3544 .3644 24 ,60 .14 .50 .64 25 .3850 .3700! .3800 .3810 .3810 3755 .3850 3755 .3850 .3873 ,3710 .3810 3S10 .3963 ,3690 3790 25 ,60 .16 .55 .71 26 .3996 .3846! .3946 .3956 .3956 .3901 .3996 .3901 .3996 .4019 ,3856 ,3956 ,3956 .4109 .3836 .3936 26 .70 .16 .55 .71 27 4142 .39921 .4(J92 .4102 .4102 .4047 ,4142 .4047 .4142 .4165 .4002 .4102 4102 .4255 .398-2 .4' '8-2 i 27 .70 .18 .55 .73 28 .4288 .4138 .4238 .4248 .4248 .4193 .4288 .4193 .4288 .4311 ,4148 .4248 ,4248 .4401 Am .4228 28 .70 .18 .60 .78 29 4434 .4284 .4384 4394 .4394 .4339 4434 .4339 .4434 .4457 ,4294 .4394 4394 .4.547 ,4274 .4374 29 .70 .20 .60 .60 30 .4580 .4130 .4530 .4510 .4540 .4485 .4580 ,4485 .4580 .4603 .4440 .4.540 ,4540 ,4693 ,4420 .4520 30 70 .20 .60 .80 THE KITTREDCtE CORXICE AND OR>s'AMENT COMPANY. 27 SHEET-METAL BRACKETS AND MODILLIONS. INTRODUCTORY. Brackets and Modillions are of very frequent occurrence in cornices, and their cost forms a large percentage of the total cost of any given job. The designs to which they may be made are almost infinite. Every architect naturally seeks for something new in each building he may de- sign. A system for estimating which shall cover all designs, therefore, must be very compre- hensive and quite exhaustive. The elements of cost in Brackets and Modillions are material, labor, and ornamentation. We use the latter word in the sense of applied decoration. As such it affects the cost of the article very materially. In the following pages is presented a series of tables treating of Brackets and Modillions according to their forms and sizes. A verbal descrip- tion is given in each instance, accompanied by a design, which in all cases is to be considered as a TYPE OF THE CLASS. It is vcry evident on referring to any of the tables, that it is impossible to construct any one design to all the sizes given. The very change in dimensions and proportion constitutes a variation in the designin itself. Hence the design given in the cut is presented only as explanatory and illustrative of the descriptive specification, to v/hich the figures in the table correspond. It will be seen at once that a very wide range in design is thus presented, while of each style a very extended list of sizes is given. In pricing special designs of brackets by these tables discretion must be exercised in comparisons. As these tables are made to cover the extreme in all cases (extreme as specified in the description — not necessarily as shown in the illustrative example given by the cut,) it is sometimes necessary to vary from the figures. Common judg- ment and discretion will determine such cases. The only EXTRA pertaining to Brackets and Modillions is that of patterns — including both drawing and the item of developing the parts, and the drawings accompanying cut and formed work. An average cost of Bracket patterns may be put at One Dollar. The small sizes of plain patterns may be figured with propriety at Seventy-five Cents each, while the larger sizes of the more elaborate patterns will sornetimes run as high as Two Dollars each. Modillions figure proportionately less. For more specific statements, the reader is referred to the following tables which give the item of patterns and construction drawings (and with cut and formed work) for each design of Brackets and Modillions as listed in the following pages ; PRICE LIST OF EXTRAS FOR SHEET-METAL BRACKETS. DESIGN NUMBERS. 794 795 806 807 818 819 800 801 812 813 824 825 830 831 836 837 871 792 793 796 797 798 808 809 810 820 821 822 842 S4S 875 879 885 802 803 804 814 815 816 826 827 828 832 833 834 838 839 840 872 873 893 848 849 854 855 860 865 866 888 844 845 846 876 878 880 850 851 852 856 857 858 861 862 863 867 868 869 870 882 890 799 811 823 896 805 817 829 835 8.11 874 8.S6 894 895 847 877 881 884 853 859 864 887 891 883 892 889 Patterns for either size of above Designs .50 .60 .55 .70 .75 .80 .85 .95 1.00 1.10 1.20 1.30 2.00 JJkawings, witu cut and lorinecl worJi, eitiier size ) of above Designs ( .25 .30 .33 .35 .37 .40 .43 .48 .50 .55 .50 .65 1.00 PRICE LIST OF EXTRAS FOR SHEET-METAL MODILLIONS. DESIGN NUMBERS. 759 760 764 765 769 770 761 762 766 767 763 768 774 778 782 783 787 771 772 773 788 775 776 779 780 784 785 777 781 786 790 789 Patterns for either size of above Designs .30 .40 .45 .50 .55 .60 .65 .70 .75 .80 Drawings, with cut and formed work, either size ) .15 .20 .23 .25 .28 .30 .33 .35 .38 .40 I 28 THE KITTKEDGE CORKICE AKD ORI^AME]S^T COMPANY. DESIGN No. 791. Face: Plain. Sides : Plain. ■NroTTf..— This (ifisis-n Is to l)e regarded as a type of a class The following figures are applicable to all Brackets possessing the same general features of ornamentation Patterns extra In all cases. See Introductory Note, Page 27. Scale : inch = 1 foot. DEPTH. *5 Inches. *7 Inches. *9 Inches. 11 Inches. Face Width 3 in. 4 in. 5 in. 3 in. 4 in. 5 In. 4 in. 5 in. Gin. 5in. 6 in. 7 in. 14 in. (Jut and i oi'med. .34 .36 .38 .44 .46 .54 .58 .60 .72 .76 .80 Complete .46 .48 .50 .58 .60 .62 .70 .74 .76 1.02 1 06 1.10 *6 Inches. *8 Inches. 10 Inches. 12 Inches. 16 in. Face Width 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 5 in. 6 in. 7 in. Sin. 6 in. 7 in. .46 .46 .52 .56 .58 .62 .74 .76 .80 .82 .86 .90 .60 .62 .66 .72 .74 .78 1.04 1.06 1.10 1.14 I.IS 1 22 *7 Inches. *9 Inches. 11 Inches. 13 Inches. 18 in. Face "Width 4 in. 5 in. 6 in. 4 in. 5 in. 6in. 5in. 6in. 7 in. 5 in. 6 in. 7 in. (Jilt and Foi'med .56 .58 .62 .66 .68 .72 .84 .88 .92 .96 1.00 1.04 .72 .74 .78 .82 .84 .88 1.16 1.20 1.24 1.32 1.36 1.40 *8 Inches. 10 Inches. 12 Inches. 14 Inches. 20 in. Face Width 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 5in. 6 in 7 in. 5in. 6in. 7 in. Cut and Formed . .66 _82_ .68 .72 .88 .82 .86 .90 1.00 104 1.08 1.14 1.18 1.22 .84 1.14 1.18 1.22 1.36 1.40 1.44 1.54 1.58 1.62 *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 22 in. Face Wndth 4 in. 5in. 6 in. 4 in. 5 in. 6 in. 5 in. 6 in. 7in. 5 in. 6in. 7 in. 5in. Oin. 7in. \j\it and Foi'nied .78 .80 .84 .95 1.00 1.04 1.14 1.18 1.22 1.2S 1.32 1.38 1.44 1.48 I.u2 .96 .98 1.02 1.32 1.36 1.40 1.54 1.5S 1.62 1.72 1 76 1.82 1.92 1.96 2. WO 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 24 in. Face Width 5 in. 6 in. 7 in. 5in. 6 in. 7 in. 5in. 6 in. 7in. 6in. 7 in. Sin. 6 in. 7 in. 8 if. v^iit and i?^ormed 1.98 1.02 1.06 1.12 1.22 1.28 1.32 1 38 1.48 1.54 1.58 1.64 1 70 1.74 Complete 1.34 1.38 1.42 1.52 1.56 1.62 1.72 1.76 1 82 1 .96 2.02 2.06 2.16 2.22 2.26 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 23 in. Face Width Sin. 6 in. 7 in. 5in. Bin. 7in. 6 in. 7 in. Sin. 6 in. 7in. Sin. 6in. 7in. Sin. Cut and Formed 1.14 1.18 1.22 1 30 1.34 1 38 Tso" 1.54 1.60 1.56 1.72 1 76 1.82 1.88 1 M2 Complete 1.54 1.58 1.62 1 74 1.78 1.82 1.9S 2.02 2.08 2.18 2.24 2.28 2.40 2 46 2 .10 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 23 in. Face Width 6 in. 7in. 8 in. 6 in. 7 in. Sin. 6 in. 7 in, Sin. 6 in. 7 in. Sin, 7 in. Sin. Oin Cut and Formed T32" 1.38 1.42 1.50 1.54 1.65 1.72 1.78 1.85 1.92 1.96 2.08 2 14 2 IS Complete 1.76 1.8-2 1.86 1.98 2.02 2.08 2.18 2.24 2.30 2.41 2.50 2.54 2.74 2.80 2.84 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 30 in. Face Width 6 in. 7in. Sin. 6in. 7 in. Sin. 7 in. Sin. 9 in. 7 in. Sin. 9 in. 7 in. Sin. in Cut and Formed 1.48 1.54 1.58 1.58 1.72 1.78 1.94 2.00 2.04 2 12 2.18 2.24 2.32 2 38 2 .44 Complete 1.96 2.02 2.06 2.20 2.24 2.30 2.52 2.58 2.62 2.78 2.84 2.90 3 06 3.12 3 .18 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 32 In. Face Width 6 in. 7 in. Sin. 7 in. Sin. 9 in. Tin. Sin. 9 in. 7 in. Sin. 9 in. 7 in. Sin. 9in. 1T66" 1.72 1.76 1.94 2.00 2.04 2.16 2.22 2 28 2. 34 2.40 2.46 2.56 2.62 2 .68 Complete 2.18 2.24 2.28 2.52 2.58 2.62 2.82 2.fcS 2 94 3.08 3.14 3.20 3.38 3.44 3.50 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. 34 in. Face Width 7 in. Sin. 9 in. 7 in Sin. 9 in. Sin. 9 in. lOin Sin. 9 in. lOin. Sin. Oin. lOin Cut and Formed 1.92 1.98 2.04 2.14 2.22 2.28 2.40 2.46 2.52 2.64 2.70 2.76 2.84 2.92 2 .98 Complete 2.50 2.56 2.62 2.80 2.88 2.94 3.14 3.20 3.26 3 46 3,52 3.58 3.74 3.82 3 .88 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. 86 in. Face Width 7 in. 8 in. 9 in. Sin. 9 in. 10 in. Sin. 9in. lOin. 8in. 9 in. lOin 8 in. Oin. 10 in. Cut and Formed 2.14 2.20 2.26 2.44 2.50 2.56 2.54 2.70 2.78 2.85 2.92 3.00 3.08 3.14 3 .22 2.80 2.86 2 92 3.18 3.24 3.30 3.46 3.52 3.60 3.76 3.82 3.90 4.04 4.10 4 .18 * Sizes marked with star are priced as Corbels that is, without Top-Moulding. THE KITTKEDGE CORJ^^ICE AKD OKXAMENT COMPAJq"Y. 29 DESIGN No. 792. Face: Plain. Sides: Sunk Panel. Note.— This design Is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. inch = 1 foot. DEPTH. 14 in. 16 in. 18 in. 20 in. 22 in. 24 in. 26 in. in. 30 in. 32 in. 34 in. 86 in. Projection Face Width (Jut and Formed Complete Projection Face Width. (Jut and ±oimou . Complete Projection Face Width. Cut and Formetl . Complete Projection Face Width. Cut a»id Funned Complete Projection Face Width. Cut una Formed. Complete Projection Face Wid h. s^ut and Jb urmea Complete Projection F.^ce Width. cut and Formed. Complete Projection Face Width . Cut and Formed . Complete Projection Face Yv^idth. Cue ana Formed . Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width. Cut and Formed . Complete ■^5 Inches. 3 in. 5 in. *6 Inches. .60 1 m .62 .66 1.U8 1 12 *7 Inches. 4in. .72 1.2« 5in. 6in. .74 .78 .30 1.34 *8 Inches. 4 in. .84 1.46 5 in. 6 in .85 .90 1 .48 1 .52 *9 Inches. 4in. Sin. Bin. .98 1.68 1.00 1 70 1.04 1.74 10 Inches. 5 in. 1.14 1.90 in. 7 in. 1.18 1.22 1.94 1.98 11 Inches. 5in. 1.32 2.16 6 in. 7 in. 1.36 1.40 2 20 2.24 12 Inches. 6in 1.52 2.44 7in. 1.58 1.62 2 50 2.54 13 Inches. 1.68 2.68 7in. Sin. 1.74 1.78 2.74 2.78 14 Inches. 1.88 2.96 7in. 8i-. 1.94 1.98 3.02 3.06 15 Inches. 7 in. 2.16 3 36 8in. 9in 2.22 2.28 3.42 3.48 16 Inches. 2.42 3.76 Sin. 9in 2.54 3 88 *7 Inches. 3 ill .58 1.04 4 in. ~To^ 1 06 5 in. .62 *8 Inches. 4iT>. 5in. 6in .74 1.30 .78 1.34 *9 Inches. 4in. .84 1.46 5 in. 6 in. .90 1.52 10 Inches. 4 in. .96 1.64 5 in. 1 00 1.68 104 1.72 11 Inches. 1.12 1.88 5 in. 6 in 1.16 1.92 1.20 1 96 12 Inches. 5in 1.30 2.14 in. 7 in. 1.34 2.18 1.40 2.24 13 Inches. 1.50 2 42 1.54 2.46 1 58 2 50 14 Inches. 6in. 1.70 2.70 7iD. Sin 1.74 2.74 1 80 2.80 15 Inches. 1.90 2.98 7 in. 3.12 .00 16 Inches. 7in. 2.18 3.38 n. 9 in. 2.24 3.44 2.28 3.48 17 Inches. 2.42 3 76 Sin. 9in 2.56 3 90 18 Inches. 8in 2.72 4.20 9 in. 10 in 2.78 4.26 2.84 4.32 *9 Inches. .70 1 26 5 in. I 6 in. ~~74 1 30 .76 1.32 10 Inches. Sin. 1.52 .90 1.54 7 in. .94 l.fS 11 Inches. .98 1.66 6in. 7in 1.02 1.70 105 1.74 12 Inches. Sir. 6 in 1.16 1 92 1.20 1.96 7in. 1.24 2.00 13 Inches. Sin, 1.32 2.16 in. 7 in. 1.36 2.20 1.40 2.24 14 Inches. Sin. 1.48 2.40 6 in. 7 in. 1.52 2.44 1.58 2.50 15 Inches. 6in. 1.70 2.70 7 in. 8in. 1.74 2.74 1.80 2.80 16 Inches. 6in. 7in. Sin 1.94 3.02 2.00 3.08 17 Inches. 7 in. 2 18 in. 9 in. 2.24 3.44 2.28 3.48 18 Inches. 7 in. 2 44 3.78 Sin. 9in 2.50 3.84 2.55 3.90 19 Inches. 8in. 2.68 4 16 9in. lOin 2.74 4.22 2.80 4.2S 20 Inches. in. 10 in 2.94 4.56 3.00 4.62 3.08 4.70 11 Inches. 1.50 6 in. I 7 in. 1.54 1.58 12 Inches. Sin. .96 1.64 n. 7 in. 1.00 1.68 1.04 1.72 13 Inches. 5in. 1.12 1.88 in. 7 in 1.16 1.92 1,20 1 90 14 Inches. Sin. 1.32 2.16 6in. 1.36 2.20 1.40 2.24 15 Inches. Sin. 1.48 2.40 6in. 7in 1.52 2.41 1.58 2.50 16 Inches. 1.68 2.68 7in. Sin 1.74 2.74 1.78 2.78 17 Inches. 6 in. 1.88 2.96 7 in. 1.94 3.02 18 Inches. in. 7 in. Sin, 2.10 2.16 2.20 3.30 3 36 3.40 19 Inches. 2.40 3.74 in. 9 in. 2.46 3.80 2.52 3.86 20 Inches. 7in. 8in 2.62 4.10 2.68 4 16 2.74 4.22 21 Inches. Sin, 9in. lOin 2.94 4 56 3.00 4.62 3.06 4.68 22 Inches. in. 9 in. 10 in 3.18 4.92 3.24 4.^8 3.32 5.06 17 Inches. 5in. 6 in. I 7 in. 1.64 2.64 1.72 2.72 18 Inches. in. 7 in. 1.86 2.94 1.92 3.00 1.96 3.04 19 Inches. in. 7in. Sin 2.06 2.12 3.26 3 32 2.16 3 36 20 Inches. 9 in 2.36 2 42 2.46 3.70 3.76 3.80 21 Inches. 7 in. Sin. 9 in 4.08 2.65 2 72 4.14 4.20 22 Inches. 7in. Sin. | 9in, 2.86 4.48 2.92 4.E4 2.98 4.60 23 Inches. 3.15 4.90 Oin. lOin 3.24 4.98 3.30 5.04 24 Inches. 3.42 5.28 9in. 3.48 B.34 10 i. 3.56 5 42 Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. 30 THE KITTREDGE CORNICE AN^D ORI^AMEi^T COMPAi^Y. Face: Plain. DESIGN No. 793. Sides: Sunk Scrolled-Panel. Note —This design Is to be regarded aa a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra In all cases. See Introductory Note, Page 27. Scale: Inch = 1 foot OEPTH. 14 in. *5 Inches. *7 Inches. *9 Inches. 11 Inches. Face Widtli 8 n. 4 in. 5 in. •n in. 4 in. 5 in. 4 in 5 i 1. 1 G m. 5in. 6 in. 1 7 in. Out and Formed Complete .46 .48 .90 .50 .92^ -50 l.u8 .62 1,10 .64 l.U -72 1.28 .76 1,32 78 1.34 .90 1 60 .94 1 .98 1.64 i 1 68 16 in. *6 Inches. *8 Inches. 10 Inches. 12 Inches. Face Width 4 in. 5 in. 6 in. 4in. ftin. Gin. 5in. Gin. 7 in. ~98" 1.68 5in. 6in. 7in. Cut and iormtju .62 l.iu .64 1.12 .68 1 16 .74 1.30 .76 1.32 .80 1.36 .92 1.62 ,94 1.64 1.02 1,78 1.06 1.82 1.10 1.86 13 in. *7 Inches. *9 Inches. 11 Inches. 13 Inches. Face Width 4 in. 5 in. 6 in. 4 in. 5 in. Gin. 5in. Gin. 7 in. 5 in. 6in. 7 in. Cut and Formed Complete .74 1.30 .76 1.32 .80 1.36 .84 1.46 ,86 1,48 .90 1.52 1.04 1.80 1.08 1.84 1.12 1.88 1.18 2 02 1.22 2.06 1.26 2.10 20 in. *8 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width 4 in. 5 in. Gin. 4 in. 5 in. 6in, 5in. Gin 7 in. 5in. 6in. 7 in. Cut and Formed Complete .84 1.4tj .86 1.48 .90 1 52 1 02 1 .78 1.06 1,82 1.10 1.86 1.22 2.06 1.26 2.10 1.30 2.14 1,38 2,30 1.42 2.34 145 2.38 22 in. *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face Width 4 in. Sin. Gm. 4in. 5 in. Gin. 5 in. Gin. 7 in. 5in. 6in. 7 in. 5 in. 6 in. 7 in. Cut and Formed 1.00 1.70 1.02 1.72 1.06 1.76 1.18 2.02 1,22 2.06 1.25 2.10 1.38 2,30 1.42 2 34 1.46 2.38 1.54 2.54 1 58 2.58 1.64 2 64 1.72 2.82 1.76 2.86 1 80 2.90 24 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. Gin. 7 in. 5in. 6 in. 7 in. 5 in. 6 in. 7 in. Gin. 7 in. Sin. 6 in. 7 in. Sin. v^utand Formed Complete 1.20 2.04 1.24 2.08 1.28 2.12 1.36 2 28 1.40 2,32 1.46 2 38 1.54 2.54 1.58 2.58 1.64 2 64 1 76 2.86 1.82 2.92 1.86 2.96 1.94 3.12 2.00 3. IS 2.04 3.22 26 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width .5 in. 6in. 7 in. 5in. Bin. 7in. 6 in. X78" 2 86 7 in. Sin. Gin. 7 i n. Sin. 6 in. 7 in. Sin. Cut and iJ ormed Complete 1 38 2.30 1.42 2 34 1.45 2.38 1.56 2 56 1.60 2.60 1 64 2.64 1.82 2.92 1.88 2.98 1.96 3.14 2,02 3 20 2 06 3.24 2 14 3,44 2.20 3.50 2. 24 3 54 28 in. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width 6 in T58~ 2 £8 7 in. Sin. 6 i n . 7 in. Sin. 6in. Tin, Sin. G in. 7 in. Sin, 7 in. Sin. 9in out and i^'oiiijca . Complete 1.64 2,(54 1. 68 2 68 1.78 2.88 1.82 2.92 188 2.98 1.96 3.14 2.02 3.20 2.08 3.^6 2 18 3.48 2,24 3 54 2.23 3. 58 2 42 3,84 2 48 3.90 2.52 3.94 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width () in. 7 in. 8in. Gin. 7 in. Sin. 7 in. Sin. 9 in. 7 in. Sin. 9in. 7in. Sin. 9 in Cut and Formed Complete 1 76 2.S6 1.82 2.92 1.86 2.96 1.98 3 16 2.02 3. 2 J 2.08 3.26 2.26 3 56 2 32 3.62 2.36 3.66 2.46 3.88 2 52 3.94 2 58 4.01) 2 70 4 26 2 76 4 32 2.82 4.38 32 in. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width H Ml. 7 in. 8 i . . 1 7 in 8 in. 9in. 7 in. Sin. 9 in , 7 in. Sin. 9 in. 7!n. Sin. 9in. Cut and Formed Complete 1.96 3 14 2,02 3 20 2 05 3 24 ! 2.26 |3L6 2.32 3 62 2 36 3 66 2 50 3 92 2.56 b 98 2.52 4.04 2.72 4.28 2.78 4 34 4 40 2.95 4.66 3.02 4 72 3 08 4.78 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width 7 in. 8in. 9 -n. 7 in 8in. 9in. Sin. 9 in. lOin Sin. 9 in. 10 in Sin. 9 in. lOin Cut and Formed Complete 2.24 3 54 2.30 3.60 2.36 3 66 2.48 3.90 2.56 3.98 2.52 4.04 2.78 4 34 2.84 4.40 2.90 4 46 3.04 4.74 3 10 4.80 3.16 4.86 3.26 5.10 3.34 5.18 3.40 5 24 36 in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width 7 in. S-n. 9in. Si-^ 9 in. lOin. 8in. 9 in. 10 ip. Sin. 9 in. 10 in 8 in. 9 in. lOi". Cut and Formed 2.48 2.54 3.% 2.60 4.02 2.82 4,38 2.38 4.44 2 94 4 60 3.04 4.74 3 10 4.80 3.18 4. 88 3.28 5.12 3.34 5.18 3.42 5 26 3, 52 5 48 3. 58 5.54 3.65 5 62 * Sizes marked with star arc priced as Corbels; that is, without Top-Moulding. THE KITTRED&E CORKICE AKD ORNAMEN^T COMPANY. 31 DESIGN No 794 Face: Plain, with Leaf. Sides: Plain, 1 B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterks extra in all cases. See Introductory Note, page 27. Scale : }4 inch = 1 foot DEPTH. 14 in. *5 Inches. *7 Inches. *9 Inches. 11 Inches. 1* ace yvi'itn 3in. 4 in . 5 in . 3in. 4 in . Sin. 4 in. Sin. Oin. Sin. 6 in. 7 in. (Jut and Formed. . Complete .46 .62 .52 .68 .60 .76 .58 .76 .64 .82 .72 .90 .74 .94 .84 1,01 .92 1.12 .92 1.26 1.02 1.36 1 14 1.48 16 in. Projection *6 Inches. *8 Inches. 10 Inches. 12 Inches. Face Width. 4in. 5 in. 6in. 4in. 5 in. Oin. Sin. Bin. 7in. Sin. Bin. 7in. cut and Formed. . Complete .64 .82 .72 .90 .82 1.00 .76 .96 .84 1.04 .94 1.14 .94 1 28 1,02 1.36 1.14 1.48 1.04 1.40 1.14 1,50 1.25 1.62 13i.i. Projection *7 Inches. *9 Inches. 11 Inches. 13 Inches. 4 in. 5 in. 6in. 4 in . 5 in. 6 in. Sin. 6in. 7in. Sin. Oin. 7in. Cut and Formed. . Complete 76 .96 .84 1.04 .94 1.14 .88 1.10 .96 1.18 1.06 1.28 1.06 1.42 1.16 1.52 1.28 1.64 1.22 1.62 1.32 1.72 1.42 1.82 20 in. *8 Inches. 10 Inches. 12 Inches. 14 Inches. 4 in. Sin. 6 in. 4 in. S in. 6 in. 5 in. Bin. 7in. Sin. Bin. 7in. Cut and Formed. . Complete .88 1.10 .96 1.18 1.06 1.28 .98 1.34 1 08 1 44 1 18 1 54 1 26 1.66 1.36 1.76 1.46 1.86 1.42 1,88 1.52 1.98 1.62 2.08 £2 in. •^9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 4 in. "ToT 1.26 Sin. Bin. 4 in. I 5 in . Bin. S in. Bin. 7in. 5 in. Bin. 7 in. 5 in. 6 in. 7 in. Cut and Formed. . Complete 1.10 1.34 1.20 1.44 1.16 1 56 1.26 1.66 1 36 1.76 1 42 1.88 1,52 1,98 1.62 2.08 1.58 2.08 1.68 2.18 1.80 2.30 1.76 2.30 1.86 2.40 1 95 2 50 24 in. Projection 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 5 in. 6 in. 7 in. Sin. 6in. Tin. 5 in. Bin. 7 in. 6in. 7in. Sin. Bin. 7in 8 in. Cut ana Formed. . Complete 1.24 1.64 1.34 1.74 1.44 1.84 1 40 1.86 150 1 .96 1.62 2.08 1.58 2.08 1.68 2.18 1.80 2.30 1,86 2,40 1.98 2 52 2.08 2 62 2.06 2.66 2 18 2.78 2 28 2.88 :6 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 5 in. Bin. 7in. B in. 6in. 7in. 6 in. 7in. Sin. 6 in. 7in. Sin. 6in. 7 in 8 in. Cut and Formea. . Complete 1.42 1.88 1.52 1.98 1.62 2.08 1.60 2.10 1.70 2.20 1.80 2.30 1.88 2,42 1,98 2.52 2.10 2.64 2 08 2.68 2.20 2.80 2,30 2 90 2.23 2.94 2.40 3 06 2 50 3.16 28 in. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 6 in. 7in. Sin. 6in. 7in. Sin. Bin. 7in. Sin. 6 in. 7in. Sin. 7 in. Sin Oin. Cut and Formed. . Complete 1.68 2.18 180 2.30 1 90 2.40 1.88 2.42 1.98 2.52 2.10 2.64 2.08 2.68 2.20 2.80 2 32 2 92 2 32 2.98 2.44 3.10 2.5^ 3,20 2.64 3.38 2.78 3.52 2.90 3.64 30 in. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7 in. Sin. 6in. 7 in, Sin. 7 in. Sin. 9in. 7 In. Sin. Oin. 7 in. Sin, 9 in. Cut and Formed . . Complete 1.86 2.40 1.98 2.52 2.08 2.62 2.10 2.70 2.20 2.80 2.32 2.92 2.46 3.12 2.58 3.24 2.68 3 34 2.68 3.42 2.82 3.56 2 96 3.70 2. 92 3.74 3.06 3.88 3.20 4.02 32 in. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width 6 in. 7 in. Sin. 7in. Sin. 9in. 7 in. Sin. 9 in. 7 in. Sin. 9 in. 7in. Sin. 9 in. Cut and Farmed. . 2.03 2.68 2.20 2.80 2.30 2.90 2.46 3.12 2.58 3,24 2.68 3.34 2.72 3.46 2.86 3.60 3.00 3.74 2.94 3 76 3.08 3.90 3.22 4 04 3.20 4.12 3.34 4.26 3.48 4,40 34 i::. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width 7 in . Sin. 9in. 7in. Sin. 9 in. Sin. 9 in. lOin. Sin. Oin. 10 in. Sin. 9 in. 10 in. Cut and I'orined. . Complete 2.44 a. 10 2.56 3.22 2.68 3,34 2.70 3.44 2.86 3.60 3. CO 3.74 3.98 3.90 3.22 4.04 3 36 4.18 3 36 4.28 3.50 4.42 3.64 4 56 3.60 4.00 3.75 4.76 3.90 4.90 36 in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width | 7iu. Sin. 9 in. 8 in. 9in. lOin. Sin. Oin. 10 in. Sin. 9in. 10 in. Sin. 9 in. 10 in. Cut and Forme a. . Complete 2 70 8.44 2.84 3.58 2 98 3.72 3.12 3.94 3 26 4.08 3.40 4.22 3.36 4.28 3.50 4.42 3.66 4.58 3.62 4,62 3.76 4.76 3.92 4.92 3.90 4.96 4.04 5.10 4.20 5.26 * Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. 32 THE KITTREDGE CORNICE AKD ORN^AMEKT COMPANY. DESIGN No. 795. Face: Plain, with Leaf. Sides: Plain, with Stamped Ornament. Note.— This design Is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. Scale : 34 inch = 1 foot, DEPTH, 14 in. 16 in. 18 in. 20 in. 22 in. 24 in. 25 in. 23 in. 30 in. 32 in. Zi in. 86 in. Projection Face Width. Cut and Formed Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed Complete Projection Fare Width. Uut and Foimed. Complete Projection Face Width cut and J^'ormed Complete Projection Face Width. <^ut and Formed. Complete Projection Face Width. cut and F'ormed. Complete Projection Face Width . Lut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete *5 Inches. 3 in. 4 in. .98 5 in. *6 Inches. 4 in. .92 1.14 5 in. 6 in. 1 00 1.2'2 1.10 1.32 *7 Inches. 4 in. 1 08 1.32 Sin. 1.16 1.40 6 in. 1.26 1.50 *8 Inches. 4 in. 5 in. I 6 in. 1.24 1.52 1.32 1.60 1.42 1.70 *9 Inches. 4in. Sin. 6in. 1.42 1.72 1.50 1.80 160 1.90 10 Inches. 5 in. T772" 2.20 1.82 2.30 7 in. 1.92 2.40 11 Inches. Sin. I Gin. 7 in 1.96 2.50 2.06 2.60 2.15 2.70 12 Inches. in. 7 in. Sin 2.28 2.88 2.40 3.00 2.50 3.10 13 Inches. 2.56 3.20 Tin. 2.68 3.32 Sin. 2.78 3.42 14 Inches. 2.88 3 60 7 in. I Sin. 3.00 3.10 3.82 15 Inches. 7 in. 3 35 4 16 3.43 4.28 9 in. 3.60 4.40 16 Inches. 3.75 4.64 8in. 3.90 4.78 9in. 4.04 4.92 *7 Inches. 3 in. 4 in 5 in. 92 |~i7oy 14 1.22 *8 Inches. 4in. 1.08 1.32 5 in. 1.16 1.40 1.26 1 50 *9 Inches. 4in. I 5 in. 1.24 1.52 1.32 1.60 1.42 1.70 10 Inches. 4 in. Sin 1,42 1 52 1.52 1.84 1.94 2.04 in. 11 Inches. 4 in. Sin. 6 in 1.64 2.i2 1.74 2.22 1.84 2.32 12 Inches. Sin. 6in 1.94 2.48 2.04 2.58 2.15 2 70 13 Inches. Sin. 2 20 2 80 2.30 2.90 7 in. 2.40 3.00 14 Inches. 6in. 7in 2.58 2.68 3.32 2 80 3.44 15 Inches. 6in. 2.90 3.62 7 in. 3.00 3.72 16 Inches. 7 in 3.38 4.18 Sin. 3.50 4.30 9 in. 3.60 4.40 17 Inches. 3.76 4 64 Sin. 9iu. 3.92 4.80 4. 06 4 94 18 Inches. 4.34 S.32 9 in. 4.48 5.46 10 in 4.52 5.60 *9 Inches. 106 1.3 J Sin. I 1.15 1,40 1 24 1.48 10 Inches. Sin. 1.34 1.74 Bin. 1,42 1,82 7 in. 1,54 1.94 11 Inches. Sin. 1.50 1.92 1 £0 2.02 7 in. 1.72 2.14 12 Inches. Sin. Gin. 7 in. 1.74 2.22 1.84 2 32 1.94 2.42 13 Inches. Sin. 1.95 2.50 Gin. 7in. 2.06 2.60 2.16 2.70 14 Inches. Sin. 2.18 2.78 Gin. 7 in. 2.28 2.88 15 Inches. 2.58 3 22 7 in. 2.58 3.32 2.80 3.44 16 Inches. Gin. 2.88 3.60 7in. Sin 3.00 3.72 3.12 3.84 17 Inches. 3 38 4.18 8 in. 3.50 4.30 3.60 4 40 18 Inches. 7 in. Sin 3 92 4 80 9 in 4.05 4.94 19 Inches. 8 in. 4 30 5.28 9in. [ lOin 4.44 S.42 4.53 S.56 20 Inches. Sin. 4.76 5.84 Oin. lOin. 4.90 5.06 6.14 11 Inches. 1.32 1.72 in.! 7 in. 1.42 1.82 1.54 1.94 12 Inches. Sin. 1.58 2.00 7i". 1.70 2.12 13 Inches. 5 in. 1.70 2.18 Gin. 1.80 2.28 7in 1.90 2 3S 14 Inches. I I Sin. Gin. 7 in 1.96 2.06 2.15 2.50 2.60 2.70 15 Inches. Sin. 2.18 2.78 in. 7 in. 2.28 2.88 2.40 3.00 16 Inches. 7in. Sin. 2.55 2.58 2.78 3.20 3.32 3.42 17 Inches. 2.88 3.60 7in. 8.00 3.. 2 3.10 3.82 18 Inches. in. 7 in. 3.24 4.04 3.35 4.16 3 45 4.26 19 Inches. 7 in. 3.74 4.62 Sin. 3.83 4.76 Oin. 4.02 4.90 20 Inches. 7 in. 4 15 5.14 4.30 5.28 9 in. 4.44 5.42 21 Inches. 4.76 5.84 9 in. lOin 4 90 5.98 5.04 6.12 22 Inches. Sin. 5.22 G.40 9in. 5 36 G.54 10 in 5.52 6.70 17 Inches. 2.46 3.10 Gin. 7 in. 2.65 3.30 18 Inches. in. 7 in. Sin 2.86 2.98 3 58 3.70 3.80 19 Inches. Gin. I 7 in. Sin 3 20 3.32 4 00 4.12 3.42 4.22 20 Inches. 3.70 4.58 in. Oin 2.34 4.72 3.96 4.84 21 Inches. 7in. Sin. 9 in 4.14 5.12 4.28 5.26 4.42 5.40 22 Inches. 7in. I Sin. 9in 4.60 4.74 5.68 5.82 4.b8 5.96 23 Inches. 5.20 9in. 5 35 6.54 10 in 5.50 G.6S 24 Inches. in. 9 in. 10 in 5.72 6 96 5.86 7.10 6.02 7.26 * Sizes marked with star are priced as Corbels; that is, without Top-Moulding. THE KITTREDGE CORKICE A>TD OEJiTAMEKT COMPAKY. DESIGN No. 796. Face: Plain, with Leaf . Sides: Sunk Panel. Note.— TMs design Is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. DEPTH. 14 In. *5 Inches. "7 Inches. "9 Inches. 11 Inches. Sin. 4 in. 5 in. Sin. 4 in. 78 1.28 5 in. 4 in. 5 in. 6 in. 5in. 6 in. 7 in. (Jut and Formed .56 .98 .62 1.04 .70 1.12 .71 1.22 86 So 1.5U 1.00 1 60 1 08 1.68 1.06 1.74 1,16 1.84 1 28 1.96 16 in. *6 Inches. *8 Inches. 10 Inches. 12 Inches. 4 in. 5 in. 6 in. 4 in. 5in. 6 in. 5 in. 6 in. 7 in. 6in. 6in. 7in. Complete .78 1.28 .86 1.36 .96 1.46 .92 1.52 1.00 1.60 1.10 1.70 1 08 1.76 1,16 1,84 1,23 1.96 1.18 1.90 1.28 2.00 1.40 2.12 IS in. *7 Inches. *9 Inches. 11 Inches. 13 Inches. Tf a r> f> VV i d t h 4 in. Sin. 6 in. 4in. 5 in. 6in. 5 in. 6in. 7 in. 5 in. 6 in. 7 in. Cut and Formed .92 1.52 1.00 1.60 1.10 1.70 .96 1.74 1.14 1.82 1.24 1.92 1 20 1.92 1.30 2.02 1.42 2.14 1.38 2.18 1.48 2.28 1.58 2 38 20 in. *8 Inches. 10 Inches. 12 Inches. 14 Inches. 4 in. 5 in. 6 in. 4 in. 5 in. 6in, Sin. 6 in. 7 in. 5in. 6 in. 7 in. Cut and Formed Complete 1.06 1 74 1.14 1.82 1.24 1 .92 1.12 1.84 1.22 1.94 1,32 2.04 1.42 2.22 1.52 2.32 1.62 2.42 1.60 2.50 1.70 2.60 1.80 2.70 22 in. *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 4 in. 5in. 6in. 4in. 5 in. 6 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5in. 6 in. 7 in. Cut and Formed 1.22 1.98 1.30 2.06 1.40 2.16 1.32 2.12 1.42 2.22 1.52 2,32 1.60 2.50 1.70 2.60 11.80 2.70 1.78 2.76 1.88 2.86 2.00 2.98 1.96 3,02 2.05 3 12 2.16 3.22 24 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Vrtna "Wirl fli 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5in. 6 in. 7in. 6in. 7 in. Sin. 6 in. 7 in. Sin. uut and Formed 1.40 2.20 1.50 2.30 1.60 2.40 1.58 2.48 1.68 2.58 1.80 2.70 1.78 2.76 1.88 2.b6 2.00 2.98 2.05 3 12 2.18 3.24 2.28 3.34 2,28 3 44 2.40 3.56 2,50 3. 66 26 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 5in. 6 in. 7 in. 5 in. 6in. 7in. 6 in. 7 in. Sin. 6 in. 7 in. Sin. 6 in. 7 in. Sin. cut and Formed Complete 1.60 2.50 1.70 2. CO 1.80 2.70 1,80 2.78 1.90 2.88 2.00 2.98 2.08 3 14 2.18 3.24 2.30 3.36 2.30 3.46 2.42 3. 58 2-52 3.68 2,52 3,80 2.54 3.92 2.74 4.02 23 in. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 6 in. 7in. Sin. 6 in. 7 in. Sin. 6in. 7 in. Sin. 6 in. 7 in. Sin, 7 in. Sin. 9in uut and Formed 1.88 2.86 2.00 2.98 2.10 >3.08 2.08 3.14 2.18 3.24 2.30 3.36 2.30 3.46 2.42 3.58 2.54 3.70 2.56 3,84 2,68 3,96 2.78 4.06 2.92 4.34 3.06 4.48 3.18 4.60 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 0 iu. 7 in. 8in. Gin. 7 in. Sin. 7 in. Sin. 9 in. 7 in. Sin. 9 in. 7in. Sin. 9 in Cut and Formed Complete 2.06 3.12 2.18 3.24 2.28 3.34 2.32 3.48 2.42 3.58 2.54 3.70 2.70 3,98 2.82 4.10 2.92 4 2J 2.96 4,38 3.10 4.52 3.24 4 66 3,20 4.76 3.34 4.90 3.48 5.04 32 in. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face "Width 6 in. 7 in. Sin. 7 in. Sin. 9 in. 7 in. Sin 9 in. 7 in. Sin. 9 in. 7in. Sin. 9in. Cut and Formed Complete 2.30 a. 46 2.42 3.58 2.52 3.68 2,70 3.98 2.82 4.10 2.92 4.20 3.00 4,42 3 14 4.56 3.28, 4.70 3.22 4.78 3.36 4.92 3.50 5,06 3.50 5,22 3.64 5.36 3.78 5.50 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width 7 in. Sin. 9 in. 7in. Sin. 9in. Sin. 9in. lOin Sin. 9 in. lOin, Sin. 9in. 10 in Cut and Formed Complete 2.63 3.% 2.80 4.08 2 92 4.20 2.98 4.40 3.14 4.56 3.2S 4.70 3.36 4.92 3.50 5.06 3 64 5.20 3,65 5.38 3 80 5,52 3.94 5.56 3,92 5.76 4.08 5.92 4.22 6.06 86 in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width 7 in. Sin. 9 in. Sin. 9 in. 10 in. Sin. 9 in. 10 in. Sin. 9 in. lOin 4.24 6.08 Sin. 9 in. 10 in. Cut and Formed Complete 2,98 4.40 3. 12 4.54 3.26 4.68 3.40 4.96 3.54 5.10 3.68 5.24 3.66 5.38 3.80 5.52 3,96 5.68 3,94 5.78 4.08 5.92 4.24 6.20 4.38 6.34 ,4.54 6.50 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. 3i THE KITTEEDGE C0R2TICE A]S"D ORi^'AMEJ^rT COMPANY. DESIGN No. 797. Face: Plain, with Leaf. Sides: Sunk ScroUed-Panel. XoTS —This design Is to be regarded a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. Scale: M inch=lfoot. DEPTH. 14 in. *5 Inches. "7 Inches. ■"•9 Inches. 11 Inches. Face Width 3 in. 4 in. 5 in. 3 in. 4in. 5 in. 4 in. 5 in. 6 in. Sin. 6 in. 7 in. 1 (Jut and Formed Complete .58 1.U4 .64 1.10 .72 1.18 .74 1.26 .80 1.32 88 1.40 92 1.52 1.02 1.62 1 10 1.70 1.10 1.84 1.20 1 94 1 S2 2. 06 16 in. *6 Inches. *8 Inches. 10 Inches. 12 Inches. Face Width 4 in. 5 in. 6 in. 4i^. 5 i n . Oin. 5in. 6 in. 7 in. 5in. 6 in. 7in. Cut and Formea — .80 1.32 .88 1.40 .93 1.50 94 1.54 1.02 1.62 1.12 1.72 1.12 1.86 1.20 1.94 1.32 2.06 1.24 2.04 1.34 2.14 1.46 2.26 18 in. *7 Inches. *9 Inches. 11 Inches. 13 Inches. Face Width 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 5in 6 in. 7 in. 5in. 6 in. 7 in. 1 Cut and Formed Complete .34 1.52 1.02 1.C2 1 12 1.72 1.06 1.74 1.14 1.82 1.24 1 .92 1 L5 2.0rj 1.35 2.16 1.48 2.28 1-44 2.32 1.54 2.42 1.54 2.52 1 1 20 in. *8 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width 4 in. 5 in. 6in. 4 in. 5 in. 6in, Bin. 6 in 7 in. 5in. 6in. 7in. Cut and Formed Complete 1.06 1.74 1.14 l.b2 1.24 1.92 L18 1.98 1 28 2.08 1.38 2.18 1.48 2.::6 1.58 2.46 1.68 2 56 1.66 2.64 1.76 2.74 1.86 2.84 22 in. *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face Width 4 in. 5 in. 6 in. 4in. 5 in. 6 in. 5 in. 6iu. 7 in. 5in. 6in. 7in. 5in. 6 in. 7 in. Cut and Formed 1.24 2.00 1.32 2.08 1.42 2. IS 1.38 2.26 1.48 2.36 1.53 2.46 1.66 2.64 1.75 2.74 1.85 2.84 1.84 2.90 1.94 3.00 2.06 3.12 2.04 3.20 2.14 3 30 2.24 3.40 24 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. 6 in. 7 in. 5in. 6 in. 7 in. 5in. 6 in. 7in. 6 in 7 in. Sin. 6 in. 7 in. Sin. Uutand iJ'ormed 1.4(3 2.34 1.56 2.44 1.66 2.54 1.64 2.62 1.74 2.72 1.86 2.84 1.84 2.90 1 94 3.00 2.05 3.12 2 14 3.30 2 26 3.42 2.35 3.52 2 35 3 62 2.48 3.74 2.58 3.84 26 in. Projection 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 5 in. 6 in. 7in. 5 in. Bin. 7 in. 6in. 7 in. Sin. 6 in. 7in. Sin. 6in. 7in. Sin. Cut and Formed 1.66 2.64 1.76 2.74 1.86 2.84 1.86 2 92 1.95 3.02 2.06 3.12 2.15 3 32 2.26 3.42 2.38 3.54 2.33 3.64 2.50 3.76 2-60 3.86 2.60 3.98 2.72 4.10 2,82 4.20 23 in. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width 6 in. 1.94 3.UU 7in. Sin. 6 in. 7 in. Sin. 6in. 7 in. Sin. 6 in. 7 in. Sin, 2.86 4.24 7in. Sin. 9in Cut and Formed 2.06 3 12 2.16 3.22 2.15 3.32 2.26 3.42 2.38 3.54 2.38 3.64 2. 50 3.76 2.62 3.88 2.64 4.02 2.76 4.14 2.98 4.48 3 12 4 62 3.24 4.74 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6iu. 7in. Sin. 6 in. 7in. 8 in. 7 in. Sin. 9 in. 7 in. Sin. 9 in. 7in. Sin. 9 in. Cut and Formed Complete 2.14 3.30 2.26 3.42 2 36 3.52 2.40 3.66 2.50 3.76 2.62 3.88 2.78 4 16 2.90 4.28 3.00 4.38 3 02 4.52 3.16 4.66 3.30 4. SO 3.30 4.94 3.44 5.08 3.58 5.22 32 in. -■ Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width ... ... 6 in. 7in. Sin. 7 in. Sin. 9 in. 7 in. Sin. 9 in. 7 in. Sin. 9 in. 7in. 8in. 9 in. Cut and Formed Complete 2.38 3.C4 2.50 3.76 2.60 3.86 2.78 4.16 2 90 4.28 3.00 4.38 3.05 4.56 3 20 4.70 3.34 4. 84 3.32 4.9(j 3.45 5.i0 3. CO 5.24 3.50 5 40 3.74 5.54 3.88 5.t8 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches, 23 Inches. Face Width 7 in. Sin. 9 in. 7 in Sin. 9in. Sin. 9in. lOin Sill. 9 in. 10 in Sin. 9in, lOin Cut and Formed Complete 2.76 4.14 2.88 4.26 3.00 4.38 3-04 4.54 3.20 4.70 3.34 4.84 3.45 5.10 3.60 5.24 374 5.38 3.76 5.56 3 90 5.70 4.04 5.84 4.02 5.96 4.18 6,12 4.32 6.26 86 in. Projection 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches, Face Width 7 in. Sin. 9 in. Sin 9 in. lOin. Sin. 9 in. lOin. 8 in. 9 in. 10 -n Sin. 9 in. 10 in. Cut and Formed, , , 3.04 4 54 3.18 4.68 3.32 4.82 3.50 5 14 3.64 5.28 3.78 5.42 3.76 5.56 3.90 5.70 4.05 5.86 4.04 5.98 4.18 6.12 4.34 6.28 4.34 6,40 4,48 6.54 4.64 6.70 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. THE KITTEEDGE COE]S"ICE Aiq"D ORN'AMENT COMPACT. 35 DESIGN No. 798. Face: Plain, with Leaf. Sides : Suuk Scrolled-Panel, with Stamped Ornament. Note.— This design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. Scale: }4 inch =1 foot. DEPTH. 14 in. 16 in. 18 in. 20 in. 22 in. 24 in. 26 in. 28 in. 30 in. 32 in. 34 in. 36 in. Projection F.acc Width. (^ut and Formed Complete Projection Face Width. Cut and lormeu. Complete Projection Face Width, Cut and Formed. Complete Projection Face Width. Cut and Formed Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. «oUtana i^'ormed Complete Projection Fflce Width. K^ut and i ormed. Complete Projection Face Width. . Cut and Formed. Complete Projection Face Width . cut and Formed. Complete Projection Face Width Cut and Formed. Complete *5 Inches. in. 4 in. 5 in ,68 .74 .82 I.IG 1.22 1.30 Inches. *6 Inches. 4 in. 5 in. 6 in .94 1.48 1.02 1.56 1.12 1.C6 Projection Face Width. Cut and Formed. Complete . . Projection Face Width. Cut and Formed . Complete *7 Inches. 4 in. 5 in. (5 in. 1.12 1.74 1,20 1.30 1.84 1 94 *8 Inches. 4 in. 5 in. Gin 1.28 2.00 1.36 2.08 1.46 2.18 *9 Inches. 4in. 5in. 6in 1.50 1.58 2.30 2.38 1.68 2.48 10 Inches. 5 in. in. 7 in. 1.82 1.92 2.78 2.88 2.02 2.98 11 Inches. 5in. Gin. 7in. 2.06 3.14 2.26 3.34 12 Inches. n. 7 in. Sin 2.52 3 08 2.52 3.78 13 Inches. 6i-, 2.66 3.94 Tin. 8iu. 2.78 2.88 4.06 4.16 14 Inches. Gin. 7in. Sin, 2.98 4.36 3.10 4.48 3,20 4.58 15 Inches. 7 in. 3.44 4 96 3. 56 5.08 3.68 5.20 16 Inches. 3.80 5.44 3.94 5.58 4.08 5.72 3i! 1.42 4 in. "94" 1.48 5 in. 1.02 1.56 *8 Inches. 4in. 5in. Gin 1.12 1.76 1.20 1.S4 1.30 1.94 Inches. 4 in. Sin. 1 28 2.00 1.35 2.08 1.4S 2.18 10 Inches. 4 in. 1 52 2.38 5 in. 1.62 2.48 6 in. 1.72 2.58 11 Inches. 4 in, 5 in. 6 in. 1,74 2.70 1.84 2.80 1.94 2.90 12 Inches. I 6in. I 7i 2.04 2.14 2.26 3.12 3.22 3.34 13 Inches. 5in. 6in. 7in. 2 32 3.45 2.42 3.58 2.52 3.68 14 Inches. 6in. 2.68 3.96 7 in. 2.78 4.06 2.90 4.18 15 Inches. 6in. 7in. Sin. 3.00 4.38 3.10 3.22 4.48 4.60 16 Inches. 7in. 8in, 9in 3.46 4.98 3.58 5.10 3.68 5.20 17 Inches. 7in. Sin. | 9in 3.80 5.44 3.96 4.10 5.74 18 Inches. Sin. 9 in. 10 in 4.36 6 16 4.50 6.30 4.64 6.44 *9 Inches. 11 Inches. 4 in. j Sin. I Gin. I| Sin. | Gin, 7 in. 1 10 1,74 1.20 1.23 1.84 1.92 10 Inches, 5 in. 1.44 2.24 Gin, 1.52 2.32 7 in, 1 64 2,44 11 Inches. Sin, Gin. 7 in 1 60 2,46 1.70 1.^2 2.56 2.68 12 Inches. 1.84 2.80 1.94 2.90 7in. 2.04 3 00 13 Inches. Sin. 6 in. 7 in. 2 06 2.16 2 26 3.14 3.24 3.34 14 Inches. Sin. Gin. 7in. .56 2 40 2,52 68 15 Inches. in, 7 in. Sin. 2.68 2.78 2.90 3.96 4.06 4.18 16 Inches. lin, 7 in. Sin 3.10 4.48 3 22 4.60 17 Inches. 7 in. 8 in. 4.t .46 3.58 5.10 5 20 18 Inches. 7in. Sin. 9in. 3 82 5 46 3 96 4.10 5.60 5.74 19 Inches. 4.32 6.12 9in. 4.46 6.26 10 in 4.60 6 40 20 Inches. Sin. I 9 in. 10 in 4,72 6 68 4.85 6.82 5.02 6.98 1.42 l.b2 2.2i 2 32 1.C4 2.44 12 Inches. Sin, Gin, 7in, 1.58 1.68 1.80 2.44 2.54 2.66 13 Inches. Sin. I 6 in. 7 in l.£0 l.^Q 2.76 2 86 2,00 2.96 14 Inches, Sin, 6in. 7 in 2.06 3.14 2.16 2.26 3.24 3.34 15 Inches. Sin. 6in. 7in 2.30 2.40 2.52 3.46 3.56 3 68 16 Inches. in. 7 in. Sin 2.66 2.78 3.94 4.06 2.88 4.16 17 Inches. Bin, 7 in 2.98 4.b6 3,10 4.48 2 20 4.58 18 Inches. in. 7 in. Sin 3.32 3.44 3.54 4 84 4.96 5.06 19 Inches. 7 in. Sin. 9 in 5.42 3.92 6.56 4.06 5.70 20 Inches. 7 in. Sin 4.18 5,98 4.32 6.12 4,45 6.26 21 Inches. in. Gin. lOin 4.72 6,68 4,86 6,82 5.00 6.96 22 Inches. 8in, 9in, lOin 5.10 7.22 5.24 7.36 5.40 7.52 17 Inches. 2.56 3.84 6in. 7 2.66 3.94 2,/6 4.04 18 Inches. in, 7 in, I Sin, 2.95 4.34 3.18 4.56 19 Inches. 6 in. 7 in. Sin 3.28 4.80 3.40 4.92 3.50 5.02 20 Inches. 7 in. 3,74 5.38 3 88 5.52 9in Too 5.64 21 Inches. 7 in. 4.16 5.96 in. 9 in. 4.30 4.44 6.10 6.24 22 Inches. 7 in. 4. 55 6.52 4.70 6.66 4.84 6.80 23 Inches. in. 9 in. 10 in 5,08 7.20 5.24 7.36 5.38 7.50 24 Inches. in. 9in. lOin 5.52 7.76 5.65 7.90 5,82 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. 36 ^IIE KITTREDGE CORKICE AKD ORJTAMEKT COMPANY. DESIGN No. 799. Face: Plain, with Leaf. Sides: Incised. NOTK.- -This design Is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Pattekj. extra in ail cases. See Introductory Note, Page 27. Scale: hi inch =1 foot. \i in. IC in. 18 in. 2Cin. 22 in. 24 in. 25 in. Projection Face Width. (Jut and Formed Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. cut and i'ormea Complete Projection Face Width, *5 Inches. Sin. 4 in. 5 m .70 1.22 .76 1.28 .84 1.36 6 Inches. 4 in. Sin. 6 in. .92 1.50 1.00 1.58 1.10 1.68 *7 Inches. 4 in. 5 in. Bin 1.06 1.72 1.14 1.80 1.24 1 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7in. Sin. 6in. 7 in. Sin . 7 in. Sin. Oin. 7in. Sin. Oin. 7 in. Sin Oin, uut aua Formed. . Complete 2.78 4.16 2.90 4.28 3.00 4.3S 3.12 4.62 3.22 4.72 3.34 4.84 3.60 5.24 3.72 5.36 3.S2 5.46 3.92 5.68 4.06 5.82 4.20 5 96 4.30 6.24 4.44 6.38 4.58 6.62 32 ia. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Fac<^ Width 6 in. 7in. Sin. 7in. Sin. 9in. 7 in. Sin. Oin. 7in. Sin. 9 in. 7 in. Sin. 9 in. Uuc and t ormed. . Complete 3 10 4.60 3.22 4.72 3.32 4.82 3.60 5.24 3.72 5.36 3.82 5.46 3.S6 5.74 4.10 5.yrf 4 24 6.02 4.32 6.26 4.46 6.40 4.60 6.54 4.72 6.62 4.86 6.96 5.00 7.10 34 ia. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. ^ace Width Tin. 8 in. 9 in. 7 in . Sin. 9 in. Sin. 9 in. 10 in Sin. Oin. lOin. Sin. 9in. lOin. 5.56^ 7.82 Cut a,nd Foiuied. . Complete 3.58 5.22 3.70 5 34 3.82 5.46 3.94 5.72 4.10 5.88 4.24 6.02 4.48 6.42 4.62 6.56 4.76 6.70 4.88 6.98 5.02 7.12 5.16 7.26 5.26 7.52 5.42 7. ",8 36 ia. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face W idth 7in. 8in. 9 in. Sin. 9in. lOin. 8 in. 9 in. lOin. Sin. 9 in. 10 in. Sin. 9ii. 10 in. Cut aud t urmcd . . Complete 3.96 5.72 4.10 5.86 4.24 6.00 4.52 6.46 4 66 6.60 4.80 6.74 4.90 7.00 5.04 7.14 5.20 T.30 5.28 T.5t 5.42 7.68 5.58 T.S4 8.10 5.84 8.24 5.00 8.40 33 in. 17 Inches. 19 Inches. 21 Inches. 1 23 Inches. 25 Inches. F.icf^ Wid^h 8in. 9 in. lOin 8 in. 9in. 10 in. Sin. 9in. 10 in. Sin. 9in. lOin Sin. 9 in. lOin. Cue and Jcuriuea. . Complete 4.45 i 6 .40 4.60 6.54 4.76 16.70 4.88 6.98 5.04 7.14 5. 18 7.28 5.28 7.56 5.42 7.70 5.58 7.86 1 5.70 1 8.10 5.86 8.26 6.02 8.42 6.20 8.76 6.36 8.92 6.52 9.08 Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. Scale : U inch = 1 foot. 42 THE KITTEEDGE COKmCE AKD ORI^AMEKT COMPANY. DESIGN No. 805. Face: Plain, with Leaf and Square Sink. Sides: Incised. jf. B.— Tills Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. DEPTH. 16 in. *6 Inches. *8 Inches. 10 Inches. 12 Inches. i'ace Width 4 in. 5 in , 6 in. 4 in. 5 in . 6 in. 5 in. 6 in. 7 in. 5 in. 6in, Tin. (Jut and. i'ormed. . Complete .98 1.62 1.06 1.70 1.16 1.80 1 .12 1.86 1.20 1.94 1.30 2.04 1.46 2.58 1.54 2.66 1.65 2.78 1.62 2.84 1.72 2.94 1.84 3.06 ISia. Projection *7 Inches. *9 Inches. 11 Inches. 13 Inches, Face Width 4in. 5 in. 6in. 4in. 5 in. 6 in. 5 in. 6in. 7 in . 5 in. 6 in. 7 in. Cue and J?'ormea. . Complete 1.12 1.86 1.20 1.94 1.30 2.04 1.30 2.12 1.38 2.20 1.48 2.30 1.54 2.86 1.74 2.96 1.86 3.08 1.86 3.22 1.96 3.32 2.06 3.42 20 ifl. *8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches. Face Width 4 in. 5 in . 6in. 4 in. 5 in. 6in, 5in. 6in. 7 in. 5in. 6in. 7 in. 5 in. 6in. 7in. Cut and Jj'ormed. . Complete 1.30 2.12 1.33 2.20 1.48 2.30 1.56 2.78 1.65 2.88 1.75 2.98 1.92 3.26 2.02 3.36 2.12 3.46 2 14 3.66 2.24 3.T6 2.34 3.86 2.38 4.02 2.48 4.12 2.58 4.22 22 ia. *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face Width 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 5 in. 6in. 7in. 5 in . 6in. 1 Tin. 5 in. 6in. 7 in. Liiit ana Formed. . Complete 1.48 2.38 1.56 2.46 1.66 2.56 1.82 3.16 1.92 3.26 2.02 3.36 2.14 3.66 2.24 3.76 2.34 3.86 2.33 4.02 2.43 4.12 2.60 4.24 2.62 4.42 2.72 4.52 2.82 4.62 24 ia. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. 6in. 7 in. Sin. 6in. 7 in. 5in. 6 in. 7in. 6in. Tin. Sin. 6 in. 7 in. Sin. Cut and J^'ormea. . Complete 1.90 3.26 2,00 3.86 2.10 3.46 2.14 3.66 2.24 3.76 2.36 3.88 2.33 4.04 2.48 4 14 2 60 4.26 2.72 4.52 2.84 4.64 2.94 4.74 2.98 4.92 3.10 5,04 3.20 5.14 25 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. 6 in. 7 in. 5 in. 6 in. 7in, 6in, Tin. Sin, 6in. Tin. Sin, 6 in. 7 in. Sin Cut and Formed. . Complete 2.16 3.68 2.25 3.78 2.36 3.88 2.40 4.06 2.50 4.16 2.60 4.26 2.76 4.56 2.86 4.66 2.98 4.78 3.00 4.94 3.12 5.06 3,22 5.16 3.24 5.30 3.36 5.48 3.46 5.58 23 in. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width 6in. Tin. Sin. 6 in. Tin. Sin. 6 in. Tin, Sin. 6 in. Tin. Sin. 7 in. Sin. 9 in. Cut and ±'ormea. . Complete 2.43 4 14 2.60 4.26 2.70 4.36 2.76 4.56 2.85 4.66 2.98 4.78 3.00 4.96 3.12 5.08 3.24 5.20 3 28 5.40 3.40 5.52 3.50 5.62 3.68 5.96 3.82 6.10 3.94 6.22 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width Gin. 7 in. Sin. 2.96 4.76 6in. 7 in. Sin. 7 in. Sin. 9 in. Tin, Sin. 9 in. 7 in. Sin. 9 in. Cut and Formed . . Complete 2.74 4 54 2.86 4.66 3.02 4.98 3.12 5.08 3.24 5.20 3.44 5.56 3.56 5.68 3.66 5.78 3.72 6.00 3.86 6.14 4.00 6.28 4.02 6.50 4.16 6.64 4.30 6.78 32 in. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width 6 in. 7 in. Sin. 7in. Sin. 9in. Tin. Sin. 9in. Tin. Sin. 4.18 6 66 9 in. Tin. Sin, 9in. (Jut and i'ormeu. . Complete 3.00 4.96 3.12 5.08 3.22 5.18 3.44 5.56 3 56 5.68 3.56 5.78 3.76 6.06 3.90 6.20 4.04 6 34 4. 04 6.52 4.32 6.fc0 4.38 T.06 4.52 7.20 4 65 7.34 34 ia. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width Tin. Sin. 9 in. 7 in. Sin. 9in, 8 in. 9 in. 10 in. Sin. 9in. lOin, Sm. 9 in. 10 in. «Jut and Formed. . 3.42 5.54 3.54 5.66 3.e6 f .78 3.74 6.U4 3.90 6.20 4.04 6M 4.20 6. 68 4.34 6.82 4.48 6.96 4.54 T.22 4.68 T.36 4.82 7.50 4.88 T,74 5.04 7.9J 5.18 S.04 33 ia. 16 Inches. 18 Inches. 20 Inches, 22 Inches. 24 Inches. Face W idth 7 in, 3.; 6 6.U4 Sin. 6.18 9 in. Sin. 9in. lOin. 8in. 9 m. lOin. Sin. 9 in. 10 in. Sin. 9 in. 10 in. (Jut and 1< ormed . . Complete 4.04 6.32 4.24 6.72 4 38 6.86 4.52 7.00 4.56 7.21 4.70 7.38 4.86 T.54 T.76 5.04 T.90 5 20 S.06 5.26 S.30 5.40 8 44 5.56 8.60 33 in. Projection 17 Inches. 19 Inches. 21 Inches. 23 Inches. 25 Inches. Face Width Isin. 9in. lOin. 8 in. 9 in. lOin. Sin. 9 in. 10 in. Sin. 9 in. lOin. Sin. 9in. lOin. Cue and Jr ormeu. . Complete 4. IS 6.66 4 31a 6.b0 4.48 6.96 4.54 7.2J 4./0 7.38 4.84 7.52 4.90 7.78 5.04 7.92 5.20 S.08 5.26 8.30 5.42 8.46 5.58 8.62 5.64 8.86 5.80 9.02 5.36 9. IS * Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. THE KITTREDGE COEXICE Ai^D 0RJn"AME2^T COMPANY. 43 DESIGN No. 806. Face: Plain, with Leaf and liosette. Sides: Plain. ]sr, B.— Tbis Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. Scale : inch = 1 foot. DEPTH. 16 in. * 6 Inches. * 8 Inches. 10 Inches. 12 Inches. FaceWiflth 3.22 4.68 19 Inches. 7 in. 8in. 9in. 16 Inches. Sin. Gin. 7in. 2.02 2.18 2.34 3.12 3.28 3.46 17 Inches. Sin. Gin. 7 in. 2.20 2.36 2.52 3 40 3.56 3.74 18 Inches. in. 7 in. Sin. 2.60 2.78 3.90 4.10 2.94 4.26 19 Inches. Gin. 7 in. Sin. 2.84 3.02 3.18 4.28 4.48 4.64 20 Inches. 7in. Sin 9 in 3.32 4.02 3.52 5.12 3.72 5.32 21 Inches. 7 in. Sin. 9 in. 32 in. 34 in. 35 in. 38 in. Cut and Formed. . Complete 2.38 3.58 2. 56 3.78 2.72 3.94 2.64 3.96 2.80 4.14 2.98 4.32 3.10 4.56 3.28 3.46 4.74 4.92 3.36 3.56 TTS" 4.96 5.16 S.38 3.60 5.36 3.80 5.56 4.02 5 78 Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width, Cut and formed. Complete Projection 'ace Width. Out antl Jb ormed. Complete Projection Face Width. Cut and li ormed. Complete Projection Face Width Cut and formed. Complete 6 in. 2.62 3 91 Tin. Sin. 2.80 4.14 2.96 4.30 15 Inches. 7 in. 3.10 4.56 Sin. 3.28 4.74 9 in. 7 in, 3.46 4.92 3.40 5.02 in. 9 in. 7in. Sin. Oin 3.50 5.22 3 82 5.44 3.62 3.82 5.58 4.04 5.80 7 in. Sin. 9 in. 3.92 4.12 4.34 5.84 6.04 6.26 17 Inches. 19 Inches. 21 Inches. 23 Inches. 7 in. Sin. 9 in 3.08 4.54 3.Z6 4.72 7 in 3 45 4.92 3.'i3 5*00 Sin, 3.50 5.22 9 in. 3.82 5.44 3.84 5.60 9 in. lOin in. 9in. lOiu 4.06 5.82 4.30 6.08 4.14 6.06 4.36 6.28 4.60 6.54 Sin. 6.46 4.56 6.70 10 in 4.90 6.96 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. 3.40 5.00 n , 9 in . Sin. 3 60 3.82 5.20 5.42 3.88 5.G4 9in 4.10 S.fcG lOin 4.34 6.12 17 Inches. 19 Inches. 3.82 5.58 9in. lOin 4 04 5.80 4.30 6.08 « in. Th" 6.06 9in. 4.38 6.30 lOin, 6.56 Sin, 4.16 6. OS 9 in. 10 in. in. 9 in. 10 in. 4.38 6.30 4.64 6.58 4 44 6.48 4.66 6.70 in. 9 in. 10 in 4.92 G.98 4.74 6.92 4.96 7.14 5.22 7.42 21 Inches. 23 Inches. 25 Inches. 8in. 4.44 6.50 9in, 4.65 6.72 10 in in. 9 in. 10 in 4.92 7.00 4.74 4.98 5.24 6.92 7.16 7.44 in. 9 in. 10 in 5.08 7.40 5.32 7.64 5.58 7.92 Sizes marked with a star arc priced as Corbels; that is, without Top-Moulding. 52 THE KITTRED&E COKXICE Ai^D ORITAMENT C0:MPANY. DESIGN No. 815. Face: Plain, with Leaf and Rosette and Square Sink. Sides: Sunk Scrolled Panel. N. B. — This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Pattekns extra in all cases. See Introductory Note, page 27. Scale : Minch = 1 foot DEPTH. IS in. ISia. 20 in. 24 in. 25 in. 23 in. 30 in. 32 in. 34 in. 35 i: 38 in. Projection Face Width. "6 Inches. 4in. Cut and Formed. Complete Projection Face Width. (Jut and Formed. Complete Projection Fare Width. (Juc and Formed. Complete Projection Face Width Uut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed . 3 92 Complete 5.7( 1.56 5 in. 1.08 1.7U Gin. 8 Inches. 4 in. 1.24 1.86 *7 Inches. 4in. Sin. Gin. 1.10 1.78 1.22 1.94 1.38 2.10 * 8 Inches. 4 in . 1.24 2.02 5 in . 1.36 2.16 Gin. 1.10 1.80 5 in, 1 22 1.9t Gin. 1.38 2 10 *9 Inches. 1.24 2 02 5 in. 1.36 2.16 10 Inches. 1.32 2.16 1.46 2.30 7 in. 1.64 2.50 1.52 2.32 10 Inches. 1.52 2.32 *9 Inches. 4 in. 1.44 2.30 5 in . 1.56 2.44 6 in. 1.72 2.60 10 Inches. 1.68 2.68 6in. 1.84 2.84 7in. 2.00 3.02 11 Inches. 5 in , 1.90 3.00 Gin, 2.C6 3.10 2.22 4 in. 5 in. Gin. 1.34 1.48 1.64 2 22 2.38 2.54 11 Inches. 4in. 5in. 6in. 1.56 2.52 1.70 2.68 1.86 2.84 12 Inches. 11 Inches. 5 in. 1.46 2 36 1.62 2.52 7 in. 1.80 2,72 12 Inches. 5 in. 1.88 2.98 6in. 2.04 3.14 7 in. 2.22 3.34 13 Inches. 5 in . 2 10 3 311 3.30 12 Inches. 6 in. 2.24 3.44 7 in, 2.42 3.64 8 in, 2.58 13 Inches. 2.45 3.76 2.64 3.96 8in. 2.26 3.46 7 in, 2.42 3.64 14 Inches. Gin. 7 in. 8 in. 2.64 3.96 2.82 4.14 15 Inches. in. 7in. 8in. 2.80 4.12 14 Inches. 6 in. 7 in. Sin. 2.70 4 12 2.88 4.32 3.C4 4.48 15 Inches. 7 in. Sin. 9 in 3.16 4.72 3.34 4.90 3.54 5.10 16 Inches. 3.45 5.14 Sin. 9in. 3 66 5.34 3.88 5.56 17 Inches. Sin. 9 in. 10 in 4 14 5.98 4.40 6.26 2.72 2.83 3.06 4.14 4.32 4.50 16 Inches. Tin. 3.18 4.74 3.36 4.92 9in. 3.54 5.10 17 Inches. 5 in. 6 in. 7 in. 1.70 2.68 186 2.84 2.02 3.02 13 Inches. 5 in. 1.88 2.98 6 in. 2.04 3.14 7 in, 2 20 3.32 14 Inches. 2.08 3.28 6 in. 2.42 3 64 15 Inches. Gin. 7 in. 2.48 2.64 2.82 .78 3.96 4.14 16 Inches. Gin. 7in. Sin. 2.70 2.88 4.12 4.32 3.06 4.50 17 Inches. 7 in. Sin. 9 in 3.18 3 36 3.54 18 Inches. 7 in. 3.46 5.16 3.56 5 36 9 in. 12 Inches. Sin. 6 in. Tin 1.44 2.34 1.60 2.50 1.78 2.70 13 Inches. Sin. Gin. 7 in. 1.64 1.80 1.96 2.64 2 80 2.98 14 Inches. Sin. 6in. 7 in 2.04 3.14 2.20 3.32 15 Inches, Sin. 6 in. 7 in 2,08 3.26 2.24 3.42 2.42 3.62 16 Inches. in. 7in. Sin 2.44 3.74 2.52 3.94 17 Inches, Gin. 7 in. Sin 2.70 4.10 3.04 4.46 18 Inches. Gin. 7 in. Sin 2 96 3.14 4.50 4.70 3.30 4.i:6 19 Inches. 7 in. in. 9 in. 3.42 3.62 3.84 5.10 P. 30 5.52 20 Inches. 7 in. 19 Inches. 7in, 3.44 5.14 Sin, 3.66 5.36 9in, 3.88 5.58 18 Inches. 8 in. 3.94 5.78 9 in, 4.16 6.00 10 in 4.40 6.26 20 Inches. 9in. 4.20 6.04 lOin. Sin, 4.44 6.30 4. 26 6.26 9in .48 lOin. 4.74 6.76 19 Inches. in. 9in. lOin. 4.24 6.24 4.48 6.48 4.72 6.74 21 Inches. Sin. 9in 4.54 6.70 4.76 6.92 10 in, 5.02 7.20 3.72 5.56 Sin, 3.92 5.76 4.14 5.98 21 Inches. 4.24 6.24 9in, 4.46 6.46 lOiu 4.70 G.72 22 Inches. Sin. 4 54 6.68 4.76 6.90 10 in. 5.02 7.18 23 Inches. Sin. 9 in. 10 in 4.84 7.12 5.08 7.36 5.34 7. 64 16 Inches. Sin. Gin. 7 in 2.08 3.26 2.24 3.42 2.40 3.60 17 Inches. Sin. Gin. 7 in 2.28 3.58 2.44 3.74 2.60 3.92 18 Inches. in. 7 in. Sin. 2.86 4.28 3.02 4.44 19 Inches. in. 7 in. Sin 2.92 4.46 3.10 4.66 3,26 4.82 20 Inches. 7 in. Sin 9 in 3.38 5.06 3.58 5.26 3.78 5.46 21 Inches. 7 in. Sin. 9 in. 3.70 5.54 3. 90 5.74 4.12 5 96 22 Inches. 7 in. Sin. 9 in 4.02 6.02 4-22 6.22 4.44 6.44 23 Inches. Sm. 9 in. 10 in. 4.52 6.66 4.76 6.90 5.00 7.16 24 Inches. Sin. 9in. lOin 4.84 7.12 5.06 7.34 5.12 7.62 25 Inches. in. Din, 5.44 7.86 lOin. 5.70 8.14 Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. THE IvITTEEDGE COrtlsICE AND OllNAME^s'T COMPAiq'Y. 53 DESIGN No. 816. Face: Plain, with Leaf and Rosette and Square Sink. Sides: Sunk Scrolled -Panel with Scamped Ornament. X. B.— This Design is to be regarded as a type of a class. The following figures arc applicable to all Brackets possessing the same general features of ornamentation. PATTEr.xs extra in all cases. See Introductory Note, page 27. DEl'TII. Projection -6 Inches. i " 8 Inches. 10 Inches. i 12 Inches. Face Width 4 in. Sin. 6 in. 4in. 5 in. 6 in. 5 in. 6in. 7 in. 5 in. 6 in. 7 in. 1 Cut and Formed. . Complete MO 1.72 1.22 1.86 1.3a 2.02 2.02 1.40 2.16 1.56 2 32 1.64 2.54 1.78 2.GS 1.96 2.88 1.78 2.74 1.94 2.90 2.12 3.10 13 h. "7 Inches. *9 Inches. 11 Inches. 13 Inches. Face Width 4 in. 5 in. 6in. 1 4in. 5 in. Gin. 5in. Gin. 7 in. ! Sin. Gin. 7 in. Cue and J?'ormed. . 1.28 ! 2.00 1.40 2 16 1.56 2.32 1.46 2.28 1.58 2.42 1.74 2.58 1.80 2 76 1.96 2.92 1 2.00 3.08 2,15 3.24 2.32 3.42 23 ij. * 8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches, Face Width 4 in. 5 in. Gin. 4 in. 5 in. Gin. 5in. Gin. 7in. Sin. Gin. 7 in. Sin. Gin. 7 in . Cut and formed. . Complete 1.46 2.28 1.58 2.42 1.74 2.58 1.60 2.62 1.82 2.78 1.98 2.94 2.06 3.12 2 22 3.28 2.38 3.46 j 2,28 3.48 2.44 3. 64 2.60 3.82 2.54 3.82 2.70 3.98 2.86 4.16 22 in. 9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches, Face Width 4 in. 5 in. Gin. 4 in. 5 in. Gin. 5 in. Gin. 7 in. 5in. Gin. 7 in. Sin. Oin. 7 in. Cut and Formed. . Complete 1.70 2.60 1.82 2.74 1.98 2.90 1.92 2.96 2.06 3.12 2.22 3.28 2 28 3.48 2.44 3.64 2 60 3.82 2.54 3 82 2.70 3.98 2.88 4,18 2.80 4,22 2.96 4,38 3.12 4.56 21 ia. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches, Face Width 5in. 6in. 7in. 5 in. Gin. 7in. 5in. 6in. 7 in. 6in. 7in. Sin. Gin. 7 in. Sin. Cut and Formed . . Complete 2.04 3.12 2.20 3 28 2.36 3 46 2.28 3.48 2.44 3.64 2 62 3.84 2.54 3 84 2.70 4.00 2.88 4.20 2.96 4.38 3.14 4.58 3.30 4.74 3.28 4.80 3.46 5. to 3.62 5.16 25 ia. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches, Face Width 5 in . Gin. 7 in . 5 in . Gin. 7in. Gin. 7 in . Sin. Gin. 7 in. 8in, Gin. 7 in. Sin. Cut ana Formed . . Complete 2.30 3.50 2.46 3.66 2.62 3.81 2 56 3.86 2.72 4.02 2.88 4.20 3.00 4.42 3.16 4.60 3.34 4.78 3.30 4.82 3.48 5.02 3.64 5.18 3.60 5.28 3.78 5.48 3.94 5.C4 23 ia. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches, Face Width 6in. 7 in. Sin. Gin. 7in. Sin. Gin. 7 in. Sin. Gin. 7 in. Sin. 7 in. Sin. 9 in. Cut and l ormea. . Complete 2.70 4.00 2.88 4.20 3.04 4.36 3.00 4.42 3.16 4.60 3.34 4.78 3.30 4.84 3.48 5.04 3.66 5.22 3 64 5.32 3 b2 5 52 3,98 5.68 4.14 5.96 4.34 6.16 4.54 6.36 30 ia. Projection 13 Inches. 15 Inches. 17 Inches. j 19 Inches. 21 Inches. Face Width Gin. 7in. Sin. Gin. 7 in. Sin. 7 in. Sin. 9 in. 1 7in. Sin. 9in. 7 in. 8 in 9in. Cut and Formed . . Complete 2.98 4.40 3.16 4.60 3.32 4.76 3.32 4.86 3.48 5.04 3.56 5.22 3.86 5.56 4 04 5.74 4.22 5.92 4.18 6.00 4.38 6,20 4.50 6,42 4.56 6.56 4.76 6.76 4.98 6.98 33 ia. 14 Inches. 16 Inches. 18 Inches. 20 Inches, 22 Inches. Face Width 6 in. 7 in. Sin. 7 in. Sin. 9 in. 7 in. Sin. 9in. 7in. Sin. 9in. 7 in. Sin. 9in. Cut and Formed . . 3.30 4.84 3.48 5.04 3.64 5.20 3.86 5.56 4.04 5 74 4.22 5.92 4 22 6.06 4.42 6.26 4 64 6.48 4.58 6.58 4.78 G.78 5.00 7.00 4.98 7.14 5.18 7.34 5.40 7.o6 34 ia. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width 7in. Sin. 9in. 7 in. Sin. 9in. Sin. 9 in. 10 in. Sin. 9in. 10 m. Sin. 9 in. lOin. Cut and Formed. . 3.84 5.54 4.02 5.72 4 22 5.92 4 20 6.04 4.42 G 26 4.64 6,48 4.80 6.80 5.02 7.02 5.26 7.28 5.20 7.36 5.42 7.58 5.65 7.84 5.58 7.90 5.82 8.14 6. 06 8.40 33 ia. 16 Inches. 18 iNceES. 20 Inches. 22 Inches. 24 Inches. Face Width 7 in. Sin. 9 in. Sin. 9 in. lOin. Sin. 9 in. 10 in. Sin. 9 in. 10 in. Sin. 9 in. lOin. Cut and i ormed . . Complete 4.22 6.04 4 42 G.24 4.64 6.46 4.84 G.84 5.06 7.06 5.30 7.b2 5.22 7.38 5.44 7.60 5.70 7.88 5 60 7.92 5.82 8.14 6.08 8.42 6.02 8.48 6 24 8.70 6.50 8.98 33 ia. 17 Inches. 19 Inches. 21 Inches. 23 Inches. 25 Inches. Face Width Sin. 9 in. lOin. Sin. 9in. lOin. Sin. 9in. 10 in. Sin. 9 in. 10 in. 8 in. 9in, 10 in Cue and i'ormea . . Complete 1 4.78 6.78 5-00 7.00 5.26 7 .28 5.20 7.36 5.44 7.60 5.68 7.86 1 5.60 ' 7.94 5.82 8.16 6.08 8.44 j 6.02 1 8.48 6.26 8.72 6.52 9.00 6.52 9.14 6.76 9.38 7.02 9.66 * Sizes marked with a star are priced as Corbels; that Is, without Top-Moulding. 54 THE KITTRED&E CORNICE AIs^D ORNAMENT COMPANY. DESIGN No. 817. Face: Plain, with Leaf and Rosette and Square Sink. Sides: Incised. N. C— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. Scale : Minch=^^ DEPTU. IGin. *6 Inches. " 8 Inches. 10 Inches. 12 Inches. Face Width 4in. Sin. 6in. 4 in. 5 in . Oin. 5 in. Gin. 7 in. Sin. 6 in. 7 in. Cut and Formed. . l^rfciTi 111 A 1.08 1.74 1.20 1 .88 1.36 2.04 1.22 1.98 1.34 2.12 1.5U 2 28 1.60 2.76 174 2.90 1.92 3.10 1.75 3.02 1.92 3.18 2.10 3.38 13 ia. * 7 Inches. *9 Inches. 11 Inches. 13 Inches. Face Width 4in. 5 in . 6in. 4in. 5 in. 6 in. 5 in. Gin. 7 in. Sin. Gin. 7 in. (Jut and Formed. . 1.22 1.98 1.34 2.12 1.50 2.28 1.40 2 24 1.52 2 38 1.68 2.54 1.78 3.04 1.94 3.20 2 12 3.40 2.00 3.40 2.15 3 56 2.32 3.74 20 ii. Pro j ection *8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 4 in. 5 in . 6in. 4 in. Sin. Gin. 5 in. 6 in. 7 in. Sin. 6in. 7in. Sin. 2. 52 4.20 6in, 7in. Cut and Formed. . Complete 1.40 2.U 1.52 2.38 1.68 2.54 1.66 2.90 1 80 3.16 1.96 3.22 2.06 3.44 2 22 3.60 2.38 3.78 2,28 3.84 2.44 4.00 2.60 4.18 2.&b 4.36 2.84 4.54 22 in. Proipot.ion *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face Width 4 in. 5 in. 6 in. 4 in. Sin. 6in. Sin. 6in. 7in. Sin. 6 in. 7 in. Sin. 6in. 7in. Cut and Formed. . Complete 1.58 2.50 1.70 2.64 1.86 2.80 1.92 3.28 2.05 3.44 2 22 3.00 2 2i 3.14 2.44 4.00 2 60 4.18 2.52 4.20 2.68 4.36 2.85 4.56 2 76 4 60 2.92 4.76 3.08 4.94 24 in. Prnippt.inn 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5in. Bin. 7in. 5in. 6 in. 7in. sin. 6in. 7in. 6in. 7in. Sin. Gin. 7 in. Gin. Cut and Formed. . Complete 2.04 3.44 2 20 3 00 2.36 3.78 2 28 3 84 2.44 4.00 2 62 4.20 2.52 4.22 2.68 4.38 2.86 4.58 2.92 4.76 3.10 4.96 3.26 5.12 3.18 5. 16 3.35 5.36 3 52 6.52 26 in. Projection 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in . 6 in. 7 in. 5 in . 6 in. 7 in . 6in. 7 in. Sin. Gin. 7in. Sin. Gin. 7 in. Sin. Cut and Formed. . Complete 2.30 3.86 2.46 4.02 2.62 4.20 2 54 4.24 2.70 4.40 2.86 4.58 2.95 4.80 3.12 4.98 3.30 5.16 3.20 5.18 3 38 5.38 3 54 5.54 3.44 5.60 3.62 5.80 3.78 5.96 28 in. Proj ection 13 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width 6 in. 7in. 2 85 4.5i 8in. 6 in. 7 in. Sin. 6in. 7in. Sin. Gin. 7in. Sin. 7in. Sin. 9 in. Cut and Formed. . Complete 2.68 4.38 3.C2 4 74 2.95 4.80 3.12 4.9d 3.30 5.16 3.20 S.iO 3.38 5.40 3.55 5.58 3 48 5.64 3.66 5.84 3.82 6.00 3.94 G.28 4.14 6.48 4.34 6.68 30 in. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7in. Sin. 6in, 7 in. Sin. 7in. Sin. Oin. 7 in. Sin. Oin. 7in. Sin. Oin. Cut and Formed. . 2.94 4.78 3.12 4.98 3.28 5 11 3.22 5.22 3. 38 5.40 3.56 5.58 3.70 5.88 3 88 6.06 4.06 6.24 3.98 6.32 4.18 6.52 4.40 6.74 4. 2d 6.82 4.48 7.02 4.70 7 24 32 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width Oin. 7 in. 8in. 7 in. Sin. Oin. 7 in. 6.38 Sin. Oin. 7 in. Sin. Oin. 7in. Sin. Oin. Cut antl Formed. . Complete 3.20 5.20 3.38 5.40 3.54 6.56 3.70 5.88 3.88 6.06 4.06 6.24 4.22 6.58 4 44 6.80 4.30 6.84 4.50 7.04 4.72 7.26 4.64 7.38 4.84 7.58 5.06 7.80 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width 7in. Sin. 9 in. 7in. 8 in. Oin. Sin. 9in. 10 in Sin. 9in. 10 in. Sin. Oin. lOin. Cut and Formed. . 3.68 5.86 3.86 6.04 4.06 6.24 4 00 6.36 4.22 6.58 4.44 6.80 4.52 7.06 4.74 7.28 4.98 7.54 4.86 7.60 5.08 7.82 5.32 8. OS 5.20 8.12 5.44 8.36 5.68 8. 62 3C in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face W idth 7 in. 8 in. Oin. Sin. Oin. lOin. Sin. Oin. lOin. Sin. Oin. 10 in. Sin. Oin. lOin. Cut and Formed. . Complete 4.02 6.b6 4 22 6.56 4.44 6.78 4. 56 7.10 4.78 7.32 5.02 7.58 4.88 7.62 5.10 7.84 5.36 8.12 5 22 8.14 5.44 8.36 5.70 8.64 5 58 8.68 5.80 8.90 6.C6 0.18 38 in. 17 Inches. 19 Inches. 21 Inches. 23 Inches. 25 Inches. Face Width Sin. 1 Oin. lOin. Sin. Oin. lOin. 8 in. Oin. 10 in. 8 in. Oin. 10 in. Sin. Oin. lOin. Cut and Formed . . 4.50 7.04 4.72 7.26 4.98 7.54 4.86 7.60 5.10 7.84 5.34 8.10 5.22 8.16 5.44 8.38 5.70 8,66 5.58 8.68 5.82 S.02 6.08 0.20 5.96 0.24 6.20 0.48 6.46 0.76 * Sizes marked with a star are priced as Corbels ; that is, without Top-Moulding. THE KITTEEDGE COEITICE AND ORKAMENT COMPAKY. DESIGN No. 818. Face: Plain, with Two Leaves. Sides: Plain. N. B.— This Design is to be regarded as a type of a class. The following figures arc applicable to all Brackets possessing the same general features of ornamentation. Patterns extra In all cases. See Introductory Note, page 27. Scale : M inch = 1 foot. DEPTH. 15 ia. 13 ia. 20 ia. 22 ia. 24 ia. 2S ia. :3 ia. 30 ia. 32 ia. Zi ia. 35 ia. Projection Face Width. (Jut and Formed. Complete Projection Face Width. cut and i? ormed. Complete Projection Face Width, Cut and Formed. Complete Projection Face Width t/Ut and Formed. Complete Projection Face Width Uut and Formed . Complete Projection Face Width Cut and Formed. Complete Projection Face Width i^ut and J? ormea. Complete Projection Face Width . cut and Formed. Complete Projection Face Width. Uut and J^ ormed. Complete Projection Face Width. Cut and Formed. Complete Projection Face WidtTi . Cut and Formed Complete Projection Face Width Cut and Formed. Complete *6 Inches. 4in. Sin. 6in .82 1.04 1.18 1.13 1.84 *7 Inches. 4 in. 1.20 5 in. 1.10 1.34 Gin. 1.25 1.50 *8 Inches. 4 in. 5 in. 6 in. 1.10 1.24 1.40 1.38 1.52 1.G8 Inches. 1.25 1.56 5 in , 1.40 1.10 Gin, l.bS 1.86 10 Inches. 1.50 1 94 Gin. 1.65 2.10 7in. 1.82 2.26 11 Inches. 5 i n . Gin. Tin 1.70 i.ae 2.02 2.22 2. 38 2.54 12 Inches. Gin. 7 in. Sin. 2.04 2 22 2 38 2. GO 2.73 2 9i 13 Inches. Gin. 2 24 2.84 7in. 2 42 3.U2 Sin. 2.58 3.18 14 Inches. Gin. 7 in 2.50 3.18 2.68 3.36 2.84 3.(2 15 Inches. Tin. 8 in. 9 in. 2 96 3.14 3.70 3.88 3.32 4.06 16 Inches. Tin. Sin, 9 in 3 25 4 08 3 48 4.30 3.70 4.52 17 Inches. Sin . 4.64 9jn. 3 95 4.86 lOi 4 20 5.10 * 8 Inches. 4in. 5in. Gin .95 1.10 1.26 1.20 1.34 1.50 *9 Inches. 4in. 5in. 6in 1.10 1.38 1.24 1.40 1 .52 1 .68 10 Inches. 4 in , 1.14 1.54 5in. 1.30 1 70 Gin. 1.46 11 Inches. 4 in . 5 in 1.36 1 b2 l.ud 1.8J 1.9'J 2.12 12 Inches. 5 in. Gin. 7 in 1.68 l.hi 2 02 2.20 2.36 2.54 13 Inches. 5 i n . I 6 i n . 7 i n . 1 90 2.05 2 22 2.46 2.62 2.78 14 Inches. 6 in. 7 in. 8 in 2.25 2 86 2.42 3.02 2.50 3.20 15 Inches. in. 7in. Sin 2.52 2.68 3.20 3.36 2.86 3.54 16 Inches. 7in. 2.98 3.72 LOG 17 Inches. 7 in . 8 in . 9 in . 3 25 4.08 3 50 4.32 3.72 4.54 18 Inches. n. 9in. I IQin 4.02 4.24 4,70 4.92 5.14 19 Inches. Sin. 9 in. 10 in 4.05 5.08 4.30 5.32 4.52 5.54 10 Inches. 5in. 6in. 7in. 1.14 1 .52 1.28 1.48 1.66 1.86 11 Inches. 5in. 6in. 7in. 1.28 1.44 1 64 l.tS 1.84 2.04 12 Inches. 5in, 1.52 1.96 6in. I 7in. 1 68 2.12 1.84 2.28 13 Inches. 5in. 6in. 7in. 1 70 2.22 1.86 2 38 2 02 2.54 14 Inches. 5 in. 6 in. 7 in 1.88 2.04 2.22 2.44 2.6J 2.78 15 Inches. in. 7in. Sin 2 26 2.42 2.60 2.86 3.02 3.20 16 Inches. Gin. 7in 2 50 2.58 2.86 3.18 3.36 3.54 17 Inches. 7 in. Sin. 9in, 2.98 3.72 3 16 3.32 3.90 4.06 18 Inches. 7 in 3.^8 4.1U Sin. 3.^0 4 32 9 in. "3T72 19 Inches. in. 9in. lOin 3.75 4.a\ 4.20 5.10 20 Inches. 8in. 9m. lOin 4.08 5.10 4.30 5. 32 4.54 5.56 21 Inches. Sin. 9 in, 4.38 4.50 5.48 4. TO 4.84 5 94 12 Inches. 5 in , 1.26 1.66 Gin, 7 in. 142 l.W 1.82 I 2.02 13 Inches. in. Gin. 7in. 1.48 1.54 1.80 1.92 2 08 2.ii4 14 Inches. 5in. Gin, 7 in 170 1.86 2.02 2.22 2 3S 2.54 15 Inches. 5ia. 6in. 1.88 X04" 2.44 2.60 7in. 2.22 2.78 16 Inches. Gin. 7in. Sin. 2.24 2.42 2.84 3.02 2.58 3.18 17 Inches. 6 in. 7in. 8in 2.50 2.68 2 3.18 3.36 3..^j2 18 Inches. 6in. 7in. Sin 2 78 3.52 2.95 3.70 3.12 3.86 19 Inches. 7 in. 3.24 4.06 Sin. 3.46 4.28 3.68 4.50 20 Inches. 7in. 3.54 4.44 3.75 4.66 9 in. 3. £8 4.88 21 Inches. Sin. 9in. lOin 4.08 5.10 4.30 5.32 4.52 5 54 22 Inches. 9in. lOin. 4 38 4.60 5.48 5.70 4.84 5.94 23 Inches. Sin. 9in. lOin 4.72 5.88 4.95 6.12 5.20 6.36 16 Inches. 5in. 6in. 7in. IM 2 04 2.20 -JAi 2.60 2.T6 17 Inches. 5in. 6in. Tin. 2.08 2.24 2.40 2.68 2.84 3.0U 18 Inches. in. 7in. 8in 2.48 3.16 2.66 3.34 2. as 3.50 19 Inches. in. 7in Sin 2 74 2.92 3.48 3.116 3.08 3.82 20 Inches. 7in. Sin 9in 3.20 4.02 3.42 4.24 3 62 4.44 21 Inches. 7in. Sin. 9in. 3.52 3.74 3.95 4.42 4.64 4 86 22 Inches. 7in. Sin, 9in 3 84 4.86 4. 06 5.08 4.28 5.30 23 Inches. Sin. 4.35 9in. 4.60 5.46 6.70 10 in 4.82 5.92 24 Inches. n. 9 in. 10 in 4.72 5.88 4 94 6.10 5.18 G.34 25 Inches. 8 in. 9 in. 10 in 5.08 6.32 5.32 6.L6 5 56 6,80 * Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. 5G THE KITTEED&E CORI^ICE AKD ORKAMEKT COMPANY. DESIGN No. 819. Face: Plain, with Two Leaves. Sides: Plain, with Stamped Ornament. N. C— This Design is to be regarded as a type of a class. The following figures arc applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. Scale: J^inch = 1 foot DEPTn. 16 in. 18 in. Projection I'ace Wi Ith. v^iit and i^onuea. Complete Projection Face Width. Cut and i?'ormed. Complete 20 iJi. Projection Face Width. Cut and Formed. Complete Projection . 22 ia. I Face Width 2i in.. c;ut and Formed. Complete Projection Face Width but and Formed. Complete 2C in. 28 in. 30 in. 32 in. 34 in. 36 in. 38 in. Projection Face Width Cut and Formed. Complete Projection Face Width Cut and Formed . Complete Projection Face Width. cut and Formed. Complete Projection Face Width. cut and t ormed. Complete Projection Face Width. Cut iiud Formed. Complete Projection Face Width, Cut and formed. Complete Projection Face Width Cut and 1^ ormed Complete ■^6 Inches. 4 in. 1.10 5 in . 1.24 1.50 6 in. 1.40 1.66 "7 Inches. 1.28 1.56 5 in. 1.42 1.70 Bin. 1.58 1.86 " 8 Inches. 4 in. 1.46 1.80 5 in. 1.60 1.94 1.76 2.10 Inches. 4 in , 5 in , 1.66 1.80 1.96 2.02 2.16 2.32 6 in. 10 Inches. 1.98 2.50 6 in, 2.14 2 66 Tin. 2.30 2.82 11 Inches. 5 in. 2.24 2.84 Bin. 2.40 y.uo 2.56 3.16 12 Inches. 2.64 3.30 7 in 2.82 3.48 2.98 3 64 13 Inches. Bin. 2.94 3,64 Tin, 3 12 3.S2 Sin. 14 Inches. Bin, 3.30 4.10 7 in. 3.48 4.28 3.64 4.44 15 Inches. Tin. 3.88 4.T6 8 in, 4.06 4.94 9 in. 4.24 5.12 16 Inches. 4.i2 5.28 4 54 5.50 9 in 4.76 5.T2 17 Inches, 8in. 4.96 6.02 9in. 5.18 6.24 5.42 6,48 * 8 Inches. 10 Inches, 4 in. 1.28 1.5tt 5in. 1.42 l.TO Bin. 1.58 1 SB Inches. 1.54 1.98 Gin, 1.68 2.12 T in. 1.88 2.32 11 Inches. 12 Inches. i 5 in. 1.70 2.16 1.86 2.32 2.06 2.52 13 Inches. I 1.46 1 1.80 5 in , 1.60 1 94 1.76 2.10 10 Inches. 4 in . 1.58 2.04 5 in . 1.74 2.20 6in. 1.90 2. 36 11 Inches. 4in. 5 in. 1.84 2.00 2.1.6 2.36 2.52 2.68 6 in . 12 Inches. 5 in. 2.22 2 82 Bin. 2.38 2.98 Tin. 2.56 3.16 13 Inches. 5 in. ! 2 50 i 3.16 2.66 3.32 Tin. 2.82 3.48 14 Inches. 6in. Tin. Sin 2.96 3 66 3.12 3.82 3.30 4.00 15 Inches. Bin. Tin. Sin. 3.32 4.12 3.48 4.28 3.66 4.46 16 Inches. Tin. 3.90 4,T8 4.08 4.96 9in. 4.24 5.12 17 Inches. Tin. 4.32 5.28 4.55 5.52 4.78 5.74 18 Inches. Sin. 5.02 B.08 9in. 5.24 B.30 lOin. 5.46 6.52 19 Inches. 8 in. 5.46 6.64 9in. 5.70 6.88 lOin. 5.92 T.IO 5 in . 1.72 2 18 6in. 1.83 2.34 Tin. 2,Cii 2.54 5in. Bin. I 1.96 i 2.48 2.12 2 64 Tin, 2.28 2.80 12 Inches, 5 in. Gin. 2.52 2.68 Tin, 2.32 2.84 13 Inches. 5 in . 2 24 2.84 Bin. 2.40 3,00 Tin. 2.56 3.16 14 Inches. 5 in. 2.48 3.14 2.64 3 30 Tin. 2.b2 3.48 15 Inches. B in. 2.96 3.66 Tin. 3.12 3 82 3.30 4.00 16 Inches. Gin. 3.30 4.10 Tin. 3.48 4.2S Sin. 3.66 4.4B 17 Inches. T in. Sin. 3.90 4.T8 4 08 4.96 9 in. 4.24 5.12 18 Inches. Tin. 4.34 5.30 4.56 5.52 9 in. 5.T4 19 Inches. 4.98 6.04 9 in 5.20 6.26 lOin 5.42 6.48 20 Inches. 5.48 B.B6 9 m , 5.70 6.88 10 in 5.94 7.12 21 Inches. Sin. 5.98 T.26 9 in. 6.20 T.48 10 in. 6.44 T.T2 14 Inches. 5 in. 2.24 2.84 Bin. I 7: 2.40 3.00 2.56 3.16 15 Inches. 2.48 3.14 Bin 2.64 3.30 2.82 3.48 16 Inches. Bin. 2.94 3.64 Tin. 3.12 3.82 3.28 3.98 17 Inches. . T: 3.30 4.10 3.48 4.28 3.64 4.44 18 Inches. in. T in. 3 70 3.88 4.58 4.76 Sin. 4.04 4.92 19 Inches. T in. 4.30 5.26 4.52 5.48 9in. 4.74 5. TO 20 Inches. T in. 4.76 5.82 Sin, 4.98 6.04 9in. 5 20 6.26 21 Inches. 5.48 B.B6 9in, 5.70 6.88 10 in 5.92 T.IO Inches. Sin. 5 98 T.26 9 in. 6.20 7.48 10 in 6.44 T.T2 16 Inches. 5 in. Bin. 2.48 2.64 3.14 3.30 Tin, 2.80 3.46 17 Inches. Sin. 6in. Tin, 2.78 3. 48 2.94 3.64 3.10 3.80 18 Inches, in. Tin. Sin 3.28 4.08 3.46 4. 26 3.62 4.42 19 Inches. in. Tin. 3.66 4.54 3.84 4.T2 4.00 4.88 20 Inches. Tin. Sin 9in 4.26 5.22 4.48 5.44 4.68 5.64 21 Inches. Tin. 4.74 5 SO 4.96 6.02 9 in. 5.18 6 24 22 Inches. T in. 5.24 6.42 Sin. 5.46 B.B4 9 in. 23 Inches. 5.96 T.24 Inches. 6.54 T.8S 9 in. 6.78 8.12 lOin, 7.02 8.36 9 in. 6.20 T.4S 10 in 6.42 T.TO 24 Inches. Sin. 6.54 T.88 6.76 8.10 10 in 7.00 8.34 25 Inches. n, 9in, lOin 7.14 8.58 7.38 S.S2 7 62 9.06 Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. THE KITTREDCtE CORKICE A1^"D ORXAMEXT COMPANY. 57 DESIGN No. 820. Face: Plain, with Two Leaves. Sides: Sunk Panel. N". B. — This Design is to be regarded as a type of a class. The followlnpr figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra In all cases. See Introductory Note, page 21 Scale : H inch — 1 foot DEPTH. IG in. Projection ■'6 Inches. ■"■ S Inches. 10 Inches. 13 Inches. Face Width 4 in. 5 in. Gin. 4 in. 5 in . Gin. 5 in. 6in. 7 in. 5 in. Gin. 7in. Cut and. Formed. . Complete .96 1.50 1.10 1,64 1.26 l.SO 1.12 1.76 1.26 1.90 1.42 2 06 1.28 2.00 1.42 2.14 1.62 2.34 1.40 2.16 1.56 2.32 1.76 2.52 13 ia. " 7 Inches. ■••"9 Inches. 11 Inches. 13 Inches. Face Width 4 in. 5 in. Gin. 4 in. 5 in. Gin. 5 in. Gin. 7in. •5 in. 6in. 7 in. Cut and Formed. . Complete 1.12 1.76 1.26 1.90 1.42 2.06 1.18 2.02 1.42 2.16 1.58 2.32 1.42 2.18 1.58 2.34 1.73 2.54 1.64 2.48 1.80 2 64 1.96 2.80 20 id. "8 Inches. 10 Inches. 13 Inches. 14 Inches. 16 Inches. Face Width 4in. 5 in. 6in. 4 in. 5 in. Gin. 5in. 6 in. 7in. 5 in. 6 in. 7 in. 5in. 6in. 7 in. "2740" 3.44 Cut and Formed. . Complete 1.28 2.02 1.42 2.16 1.58 2.32 1.28 2.04 1.44 2.20 1.60 2.36 1.68 2.52 1.84 2.68 2.00 2.84 1.88 2.84 2.04 3.00 2.20 3.16 2.08 3.12 2.24 3.28 22 h. *'^9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face Width 4 in. 5 in. Gin. 4in. 5 in. Gin. 5 in. Gin. 7in. 5 in. 6 in. 7 in. 5 in. 6in. 7 in. out and Formed. . Complete 1.46 2.28 1.60 2.42 1.76 2.58 1.52 2.36 1.68 2.52 1.84 2.68 1.88 2.84 2.04 3.00 2.20 3.16 2.08 3.12 2.24 3.28 2.42 3.46 2.28 3.40 2.44 3.56 2.50 3.72 Zi ia. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5in. 6in. 7in, 5 in. Gin. 7in. 5 in. Gin. 7 in. 6 in. 7 in. Sin. Gin. 7 in. Sin. Cut and Formed. . Complete 1.66 2.50 1.82 2.66 1.98 2.82 1.86 2 82 2.02 2.98 2.20 3.16 2.08 3.12 2.24 3.28 2.42 3.46 2.44 3.56 2.62 3.74 2.78 3.90 2.70 3.94 2.88 4.12 3.04 4.28 25 ia. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. TsT 2.84 6 in. 7in. 5 in. Gin. 7in. Gin. 7in. Sin. Gin. 7 in. Sin. 6 in. 7 in. Sin. Cut and Formed. . 2.04 3.00 2.20 3.16 2 10 3.14 2.26 3.30 2.42 3.46 2.45 3.58 2.62 3.74 2.80 3.92 2.72 3.96 2.90 4.14 3.06 4.30 2.98 4.34 3.16 4.52 3.32 4.68 23 in. 13 Inches. 14 Inches. IG Inches. 18 Inches. 30 Inches. Face Width Oin. 7 in. Bin. 6 in. 7 in. Sin. 2.80 3.92 Gin. 7in. Sin. Gin. 7in. Sin. 7 in. Sin. 9 in. Cut and Formed . . Complete 2.24 3.28 2.42 3.46 2.53 3.62 2.46 3.58 2.62 3.74 2.72 3.D6 2.90 4.14 3.08 4.32 3 02 4.38 3.20 4.56 3.36 4.72 3.48 4.93 3.70 5.20 3.90 5.40 30 ia. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 31 Inches. Face Width 6 in. 7in. Sin. 6 in. 7 in. Sin. 7in. Sin. 9in. 7 in. Sin. 9in. 7 in. 8in. 9in. Out and Formed . . Complete 2.44 3.56 2.62 3.74 2.78 3. 90 2.74 3.98 2.90 4.14 3.08 4.32 3.22 4.58 3 40 4.76 3.56 4.92 3.52 5.02 3.74 5.24 3.96 ' 5.46 3.80 5.44 4.02 5.66 4.24 5 88 3: in. 14 Inches. IG Inches. 18 Inches. 30 Inches. 33 Inches. Face Width Gin. 7 in. Sin. 7in. Sin. 1 9 in. 7in. Sin. 9in. 7 in. Sin. 9in. 7 in. Sin. 9in. Cut and Formed. . Complete 2.72 3.96 2.90 4.14 3.06 4.30 3.22 4.58 3.40 4.76 3.56 4.92 3.56 5. 06 3.78 5.28 4.00 5.50 3.82 5.46 4.04 5.68 4.26 5.90 4.14 5.96 4.36 6.18 4.58 6.40 34 ia. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 33 Inches. Face Width 7in. Sin. 9in. 7 in. Sin. 9in. Sin, 9 in. 10 in Sin. Oin. lOin. Sin. 9 in. 10 in. Cut and Formed. . 3.20 4,56 3.38 4.74 3 56 4 92 3.54 5.U4 3.78 5.28 4.00 5.50 4.04 5.63 4.26 5.90 4.43 6.12 4.38 6.20 4.60 6.42 4.82 6.64 4.58 6.62 4.92 6.86 5.14 7.08 35 ia. 16 Inches. 18 Inches. 30 Inches. 33 Inches. 34 Inches, Face Width 7 in. 8 in. 9 in. Sin. 9in. 10 in. Sin. 9 in. 10 in. Sin. 9 in. 10 in. Sin. 9in. lOin. Cut and turmed. . Complete 3.54 5.04 3 76 5.26 3 98 5.48 4.08 5 72 4.30 5.94 4.52 6.16 4.38 6.20 4.60 6.42 4.84 6.66 4 70 6.64 4.92 6. 86 5.16 7.10 5.06 7.12 5-28 7.34 5.52 7 .58 38 in. 17 Inches. 19 Inches. 31 Inches. 33 Inches. 25 Inches. Face Width Sin. 9 in. lOin. 8 in. 9in. 10 in. Sin. 9in. 10 in. Sin. 5.05 7.12 9in. ' 10 in. Sin. Oin. 10 in. 5.92 S.12 Cut and Formed . . Complete 4.02 5.66 4 24 5.88 4.48 6.12 4.36 6.18 4.60 6.42 4.82 6.64 4.70 6.64 4.92 6.86 5.16 7.1G 5.30 7 .36 5.54 7.60 5.44 7.64 5.68 7.88 Sizes marked with a star are priced as Corbels; that is, without Top-Moukling. 58 THE IvITTKEDCxE COEmCE AKD ORKAMENT COMPANY. DESIGN No. 821. Face: Plain, with Two Leaves. Sides: Sunk Scrolled -ranel. K. 13.— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. Scale : K inch = 1 foot DEPTH, IC ia. 13 ia. 20 in. 22 in. Projection P'ace Width. Uut and Formed. Complete Projection Face Width. cut and formed. Complete 24 In. 26 in. 28 ia. 30 ia. 32 ia. 34 in. 35 ia. 33 in. Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and Formea . Complete Projection Face Width . cut and Formea. Complete Projection Face Width . Cut and i'oruica. Complete Projection Face Width. Cut and Furmed. Complete Projection Face W idth , Cut and Formed Complete . . . . Projection Face Width Cue and J^'ormed . Complete *6 Inches. 1.54 5 in . 1.12 1.68 bin . 1.84 *7 Inches. 1.76 5in, 1.28 1.92 6in. 1.44 2.08 * 8 Inches. 4 in. 1.28 2.02 Bin. 1.42 2.16 6 in, 1.58 2.32 ^9 Inches. 4 in. 1.48 2.30 5 in. 1.62 2.44 6 in, 1.78 2.60 10 Inches. 5 in. 1.72 2.64 7 in. 2.04 2.% 11 Inches. 5 in. 6 in, 7 in. 1.94 2.98 2.10 3.14 2.26 3 30 13 Inches. 6 in, 2.33 3.4i 7 in. I 8 in. 2.43 3. GO 3.76 13 Inches. Gin. 2.52 3.74 7in. 2 70 3 92 Sin. 14 Inches. Gin. 7 in, | 8in, 2.80 4.14 2.93 4 32 3.14 4.48 15 Inches. 7 in. 3.28 4.74 3.46 4.92 3 64 5.10 16 Inches. 7in. 3.eo 5.18 8in. 9in. 3 82 X04 5.62 17 Inches. Sin. 4.12 5.84 9in. T34" 6.06 lOin. 4.58 6.30 8 Inches. 4in, 1.14 1.78 5 in 6 in. 1.44 2 08 "9 Inches. 4 in. 1.28 2.02 5 in. 1.42 2.16 1.58 2.32 10 Inches. 4 in. 5 in, 1.34 2.18 1.50 2.34 6in. 1.66 2.50 11 Inches. 4 in, 1.58 2.50 5 in. 1.74 2.66 1.90 2.82 12 Inches. 5 in. 1.92 2 96 2.08 3.12 7 in. 2 26 3.30 13 Inches. 5 in 2 16 3.28 2.32 3.44 7in 2.18 3.60 14 Inches. Gin. 2.54 3.76 7 in. 2,70 3.92 2 88 4.10 15 Inches. 6in. 2.82 4.16 7 in. 4.32 3.16 4.50 16 Inches. 7 in. 3.30 4.76 94 9in, 3.64 5.10 17 Inches. 7in, 3 60 5.18 8in 3.84 5.42 9in. 4.06 5.64 18 Inches. 8in. 4.18 5.90 9in, 4.40 6.12 10 in 4.62 6.34 19 Inches. 4.46 G.36 4.70 6. GO lOin, 4.92 G.82 10 Inches. 1.32 2.10 6 in , 1.45 2.24 1.66 2.44 11 Inches. 5 in. 1.48 2 32 in. 7in. 1.64 2.48 1 84 2.68 12 Inches. Sin. 1.74 2.66 1.90 7 in. 13 Inches. 5 in. 2.98 6in. 2.10 3.14 7in. 2.26 3 30 14 Inches. 5 in , 2.14 3.26 6 in 2.30 3.42 7in, 2.43 3.60 15 Inches. 6 in. 2.54 3.76 7 in. 2,70 3.92 8 in. 2,88 4,10 16 Inches. 2,80 4,14 7 in. 2.98 4.32 3.16 4.50 17 Inches. 7 in. 3,30 4,76 Sin. 3.48 4,94 3,64 5.10 18 Inches. 7in. 8in. 9in 3.52 3.84 4. 5.20 5.42 19 Inches. 4.14 5.86 9in. 4.36 6.08 lOin 4,58 6,30 20 Inches. Sin, 4.48 6.38 4.70 lOin. 4.94 6.84 12 Inches. Sin. 6 in. 7i 1.46 1.62 2.30 2.46 2.60 13 Inches. 5 in. Gin. 7 in. 1.70 1.86 2.62 2 78 2.02 2.94 14 Inches. 5 in. 6 in. 7 in 1 94 2.98 2.26 15 Inches. 5in. Gin. 7 in 2.14 2.30 3.^6 3.42 2.48 3.60 16 Inches. 21 Inches. Sin. 4.80 6.84 9 in. 5.02 7.06 10 in 5.26 7.30 6 in. 2.52 3.74 7 in. 2.70 3.92 8 in. 2.85 4.08 17 Inches. in. 7in. Sin. 2.80 4.14 2.98 4.32 3.14 4.48 18 Inches. 6in. 7in, Sin. 3.10 3.28 4.56 4.74 3.44 4.90 19 Inches. 7in. Sin. 9in. 3.80 4.02 5.38 5.60 20 Inches. 7in. Sin. 9in . 3.92 4.14 5.64 5.86 4,36 6.08 21 Inches. in. 9in. lOm 4.48 6.38 4.70 6.60 4.92 6.82 22 Inches. in. 9 in. 10 in .84 5.02 5.25 7.06 7.30 23 Inches. in. 9in. lOin 5.15 5.40 7.32 7.56 5.54 7.80 16 Inches, Sin. 2.14 3.5:6 Gin. 2.30 3.42 7 in, 2.46 3,58 17 Inches. 5 in. 2.36 3 58 Gin 2,52 3,74 7 in. 2.68 3,90 18 Inches, 6in. 2.78 7 in. 2.^6 4,30 3, la 4.46 19 Inches. 6 in. 3 C6 4.52 7 in. 3.24 4.'.0 3 40 4.80 20 Inches. 7in. Sin. 9in 3.54 3.76 3.96 5.12 5.34 5.54 21 Inches. 7 in. 3.90 4.12 5.84 4.34 6.06 22 Inches. 7in. Sin. 9in. 4.24 4.45 4.68 6.14 6.36 6.58 23 Inches. »in. 4.78 6.82 9 in. 5.02 7.06 10 in 5. 24 7.28 24 Inches. 9in. lOin, 5 16 5 38 5.52 7.32 7.54 7.78 25 Inches. in. 9in. lOin 5.55 7,86 5.80 8,10 6.04 8.34 Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. THE KITTKEDGE CORKICE AKD ORiq'AMEJ«rT C03IPANY. 59 DESIGN No. 822. Face: Plain, with Two Lea7es. Sides: Sunk Scrolled -Panel, with Stamped Crnameat. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. Scale : inch = 1 foot DEPTH. IC ifl. 13 ia. 20 u. 22 in. 24 in. 2G in. 23 i^. 30 in. 32 in. 34 in. Projection Face Width. Uut and Formed. Complete Projection Face Width. Cut and Jb'ormed . Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width cut and Formea. Complete Projection Face Width Cut ana f ormed. Complete Projection Face Width Cut and Ij'ormea . Complete Projection Face Width . Cut and Formed . Complete Projection Face Width. Cut and i! ormed. Complete Projection Face Width. Cut aud i uimed. Complete 3S i2. 33 in. Projection Face Width. Cut and Formed. Complete Projection Face Width ■*6 Inches. 4in. 1.12 1.70 5 in. 1.26 1.84 6in 1.42 2.00 *7 Inches. 4in. 5in. 6in. 1.32 1.46 1.62 1.98 2.14 2.30 *8 Inches. 4in. Sin. 6in. 1.50 1.64 1.80 2.28 2.42 2.58 *9 Inches. 4 in . 5 in . 6 in 1.74 1.88 2.04 2.60 2.74 2.90 10 Inches. Sin. 6in. 7in. 2.03 2.24 2.40 3.08 3.24 3.40 11 Inches. 5 in. 6 in. 7 in . 2.34 2.50 2.66 3.48 3.64 3.80 12 Inches. in. 7in, 2.76 2.94 3.10 3.98 4.16 4.32 13 Inches. in. 7in. Sin. 3.04 3 22 3.38 4.38 4.56 4.72 14 Inches. Gin. 7in, Sin. 3.40 4.86 3.53 5.04 3.74 5.20 15 Inches. 7in. Sin. 9in. 3.96 4.14 4 32 5.56 5.74 5.92 16 Inches. 7 in. 4.36 4 58 4.80 6.08 6.30 6.52 17 Inches. in. 9in. lOin Cut and Formed . . 4 98 5 20 5.44 5 42 5 65 5.88 5 86 5 08 5 I Complete 6.86 7.08 7.32 7.48 7.72 7.94 8.08 8.30 8.54 * 8 Inches. 4 in. Sin. Gin 1.32 2.00 1.45 2.14 1.62 2 30 *9 Inches. j4in. Sin. 6in. 1.50 1.64 1.80 2.28 2.42 2.58 10 Inches. 4in. Sin. 6in. 1.68 1.84 2.00 2.58 2.74 2.90 11 Inches. 4 in. Sin. 6 in. 1.94 2.10 2.25 2.94 3.10 3.26 12 Inches. Sin. 6in. 7in. 2.32 2.48 2.65 3 46 3.62 8.80 13 Inches. Sin. 6in. 7ia. 2.62 2.78 2.94 3.84 4.00 4.16 14 Inches. in. 7in. Sin. 3.06 3.22 3.40 4.40 4.56 4.74 10 Inches. 13 Inches. 1.64 2. 48 6 in. 1.78 2.62 7 in. Sin. 1.98 i l.bO 2.^2 11 Inches. 5 in. in. 7in. 2.70 6 in. I 7 in , 1.96 2.86 2.16 3.06 1.82 1.98 2 18 I 2.72 2.88 3.( 13 Inches. Sin. 6in. 7in. 12 Inches. 1 14 Inches. Sin. 6in. 7in 2.10 2 26 2.42 3.10 3.X6 3.42 13 Inches. Sin. 6in. 7in. 2 34 3.48 2.50 2.65 3.64 3.80 14 Inches. 5 in . 6 in. 7 in 2.60 2.76 2.94 3.82 3.98 4.16 15 Inches. in. 7in. Sin. 3.06 4.40 3.22 3.40 4.56 4.74 15 Inches. 6 in. 3.42 4.88 7 in. 3.58 5.04 Sin, 3.75 5.22 16 Inches. 7in. 5.58 4.15 5.76 4.32 5.92 17 Inches. 7 in. 6.08 4.60 6 32 4.82 6.54 18 Inches. in. 9in. lOin 5 04 5.26 5.48 6.92 7.14 7.36 19 Inches. in. 9in. lOin 16 Inches. in. 7in. 3.40 3.58 3.75 4.86 5.04 5.22 17 Inches. 7 in. 3.98 5.58 4.16 5.76 9 in. T32 S.92 18 Inches. 7in. Sin 4.38 4.60 i 82 6.10 6.32 6.54 19 Inches. in. 9in. lOin 5.00 6.88 5.22 5.44 7.10 7.32 20 Inches. in. 9in. lOin 5.44 5.66 5.90 7.60 7.72 7.96 21 Inches. 2.05 2.22 2.38 3.06 3 22 3.38 Sin. 6in. 7 in 2.34 3.48 2.50 3.61 2.66 3. SO 15 Inches. Sin. Oin. 7 in 2.60 2.76 2.94 3.82 3.98 4.16 16 Inches. 6in. 7in 3.04 3.22 3.38 4.38 4.56 4.72 17 Inches. 6in. 7in. 8in. 3.40 3.58 3.74 4.86 5.04 5.20 18 Inches. 3 78 5.38 7 in. 3.95 5.56 Sin, 4.12 5.72 19 Inches. 7 in. 4.34 6.06 .56 Oin. 4.78 6. to 20 Inches. 7in. Sin. 9in 4.78 6.66 5.00 5.22 7.10 21 Inches. Sin. 5.44 7.50 9 in. 5.65 7.72 10 in 5.88 7.94 22 Inches. in. 9 in. 10 in 5 85 5.08 30 5.32 8.54 Sin. Oin. lOin 23 Inches. Sin, Oin. lOin 6.34 5.58 6.82 8.08 8.92 0.16 16 Inches. 5 in. 3.82 2.76 3.98 7in. 2.92 4.14 17 Inches. Sin. 4 22 Oin. 3.04 4.38 7 in. "3.20" 4.54 18 Inches. in. 7in. Sin 3.38 3.55 3.;2 4.84 5.C2 5.18 19 Inches. in. 7 in. 3.74 3.92 4 08 5.34 5.52 5. 08 20 Inches. 7 in. Sin. Oin. 4.30 4.52 4.72 6.02 6.24 6.44 21 Inches. 7 in. 4.76 6.64 6.86 Oin. 5.20 7.08 22 Inches. 7in. 5.20 7.26 5.42 7.48 5.6^; 7.70 23 Inches. »in. 8.06 Oin. 6.08 8.30 10 in 6.30 S.52 24 Inches. Sin. Oin. lOin 5 34 8.68 6 55 8.90 5.80 9.14 25 Inches. Sm. 0.38 7.12 9.02 lOin 7.35 0.86 Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. 60 THE KITTEEDCtE COEI^ICE AND OEIn'AMEK^T COMPANY. DESIGN No. 823. Face: Plain, with Two Leaves. Sides: Incised. N. B.— This Design Is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. Scale : H Inch = 1 f oot . DEPTH. 16 ia. 18 in. 20 iJ. 22 in. 24 in. 25 in. 30 in. 32 in. 34 in. 3G ia. 33 in. Projection Face Width. Uiit and Formed. Complete Projection Face Width Cut and J^uiiiitd. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width (Jut and Formea . Complete Projection Face Width , Cut and Formed . Complete Projection Face Width, Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and f ormed . Complete *6 Inches. l.lu 5 in . 1.24 1.80 6 in. TTio" 2.02 " 7 Inches. 4 in. 1.25 1.96 5 in. 1.40 2.10 6 in. 1.55 2.26 8 Inches. 4 in. 1.44 2.24 1.58 2.38 Bin, 1.74 2.54 -•^ 9 Inches. 4 in. 1.62 2 50 5 in. I 6 in. 1.76 2.64 1.92 2.8J 10 Inches. 5 in , 2.08 3.40 Bin. 2.24 3.56 2.40 3.72 11 Inches. 5in. BiT 2.34 3.84 2 50 4.00 7 in. 2.56 4.16 12 Inches. 2.74 4.36 Tin. 4.54 Sin. 3.08 4.70 13 Inches, Bin. 3.00 4.76 7in. 3. 18 4.94 8in, 3.34 5.10 14 Inches. Bin. 3.30 5.22 Tin, 5.40 Sin. 3.64 5.56 15 Inches. Tin. Sin. 9in. 3.98 4,16 5.88 6.06 0.24 16 Inches. i in . Tie" 6.40 8 in. 4 38 6.02 9 in 4.60 6.84 17 Inches. Sin. 4.70 7.12 9in. 4 92 T.34 lOin 5.16 T.58 * 8 Inches. 4 in. 1.26 1.96 Sin. 1.40 2.10 6 in. 2 26 *9 Inches. 1.58 2.38 6 in. 1.74" 2.54 10 Inches. 4in. 1.66 2.86 Sin. 6 in, 1.82 3 02 1.98 3.18 11 Inches. 4 in . 1.94 3.26 Sin. 2.10 3.42 2 26 3.58 12 Inches. 5 in. 2,32 3 82 Bin, 2.48 3.98 Tin. 2 66 4.16 13 Inches. Sin. Bin, 2 60 4 i!2 2,76 4.38 7in. 2,92 4,54 14 Inches. 3,02 Tin. 3 18 4.94 Sin. 3.36 5.12 15 Inches. 3. 32 5.24 Tin, 3.55 5.58 16 Inches. Tin. I 82 .90 9in. 4.00 6,08 4.16 6.24 17 Inches. T in. 6.40 Sin, 4,40 B 64 9in, 4,62 6.86 18 Inches, 4,76 T.18 9in, 4.98 T.40 lOin 5.20 T.02 19 Inches. 10 Inches. 1.60 2. TO 6 in. 1.74 2.84 Tin. 1.94 3.04 11 Inches, 5 in . 1.80 3 00 6 in. 1.96 3.16 Tin. 2,15 3.36 12 Inches. Sin. 2.10 3.42 6in. 2 25 3.58 Tin. 2 42 3 74 13 Inches. 5 in. 2 34 3.84 Bin. 2.50 4.00 Tin, 2,66 4.16 14 Inches, 2, 58 4.20 6in. 2,74 4,36 Tin, 2.92 4,54 15 Inches. 6 in. 3, C2 4. T8 Tin. 3.18 4 94 3,36 5.12 16 Inches, Bin. 3,30 S,22 T in. 3.48 5.40 8in. 3 66 5.58 17 Inches, Tin. 3.82 5.90 « in, Too" 6.08 9 in, 4.16 6.24 18 Inches, T in. B.42 Sin. I 9 in, 4.40 B.64 4 52 6.86 19 Inches. in. j 9 i n 4,72 T.14 4,94 T,36 10 in 5, 16 T,58 20 Inches, Sin 5,10 T.T4 9in 5.32 T.96 10 in 5.55 8,20 in. 9 in . 10 in. 5,08 T.72 5.32 7.96 5,54 8.18 21 Inches. .30 10 in, 5, 94 8 76 12 Inches, 5 in . 1.73 2.98 6 in. 1,94 3,14 2 14 3 34 13 Inches. Sin. '2T06' 3.38 2,22 3.54 7 in. 2.38 3.70 14 Inches. Sin, 2.34 3.84 Bin. 2,50 4,00 15 Inches. S in . 2.58 4,20 Bin. 2.74 4.36 Tin. 2.92 4.54 16 Inches. 6in. 3.00 4.T6 T in. 3.18 4.94 3.34 5.10 17 Inches. 6 in. 3.30 S.22 Tin. 3.48 5,40 Sin. 3.64 5.56 18 Inches. Bin. 3 62 5.70 Tin. 5.88 Sin. 3,96 6.04 19 Inches. 4,14 6.38 Sin, 4.36 6.60 6.82 20 Inches, Tin, 4,72 T,14 9in. 4.94 T.36 21 Inches. Sin, 5,10 T,T4 9in^ T,9B 10 in 5,54 8 18 I 22 Inches. in. 9 in, 10 in. 5 48 8.30 5,70 8,52 5,94 8,76 23 Inches. Sin. 9in. lOin 5.90 8.88 6,14 9.12 6.38 9,36 16 Inches. Sin, 2.58 4.20 Bin. 2, 74 4,36 2.90 4.52 17 Inches. Sin, Bin. Tin. 3,00 4.T6 3,16 4.92 18 Inches. Bin. Tin. Sin. 3.28 5.20 3.46 5.38 3.62 5.54 19 Inches. Bin. Tin. Sin. 3 58 5,66 5,84 3 92 6,00 20 Inches. Tin. 4.10 6 34 Sin. 4,32 B.56 9 in. 4.52 6.76 21 Inches. Tin. Sin. 9 in. 4.48 6.90 4,70 T.12 4.92 T.34 22 Inches. Tin. Sin. 9in, 4.86 T.50 5.30 T.94 23 Inches, n, 9in. lOin 5.46 8.28 5.70 8.5-2 .T4 24 Inches, Sin. 9in, lOin 5 90 8.88 6.12 9 10 6 36 9.34 25 Inches, Sin. 6.32 9.48 9in. 6,56 9,72 10 in 6.80 9.9t) Sizes marked with a star are priced as Corbels ; that is, without Top-Mouldin£ THE KITTEEDGE COIIJTICE AND Olli^'AMElN'T COMPANY. Gl DESIGN No. S24. Face: Plain, and Square Sink. Sides: Plain, N. B.— ' This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterks extra in all cases. See Introductory Note, page 27. Scale : H Inch = 1 foot DEPTH. 16 in. *6 Inches. * 8 Inches. 10 Inches. 12 Inches. r ace w icitn 4in. 5 in . 6 in. 4 in. Sin. Gin. 5 in. Gin. 7in. 5 in. Gin. 7in. i Cut and FonneU. . Complete .52 .52 .54 .74 .58 .78 .62 .86 .64 .88 .68 .92 .80 1.16 .82 1.18 .86 1.22 .88 1.2G .92 1.30 96 1 1.34 ISia. *7 Inches. *9 Inches. 11 Inches. 13 Inches. 4 in. 5 in. 6in. 4 in. 5 in. Gin. 5 in. Gin. 7in. 5 in. Gin. 7 in. Cut and J?"ormea. . Complete .62 .86 .64 .88 .68 92 .74 .98 .76 1.00 .80 1.04 .90 128 .94 1.32 .98 1.36 1.02 1.46 1.06 1.50 1.10 1.54 20 i&. * 8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches. "R'nr'A 'Wirlt^h 4 in . 5 in . Gin. 4 in . 5 in. Gin. 5in. Gin. 7in. 5in. Gin. 7in. 5in. 6in. 7 in. Cut and Formed. . Complete .74 .98 .76 1.00 .80 1.04 .88 1.2G .92 1.30 .96 1.34 1.08 1.50 1.12 1 .54 1.16 1.58 1 22 1.70 1.26 1.74 1 30 1.78 1.38 1.90 1.42 1.94 1.45 1.98 22 in. *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 4 in. 5 in. 6in. 4 in. 5 in. Gin. 5in. 6in. 7 in. 5in. Gin. 7 in. 5 in. Gin. 7 in. Cut and Formed. . Complete .88 1.14 .90 1.16 .94 i.':o 1.04 1.46 1.08 1 50 1.12 1.54 1 22 1.70 1.26 1.74 1.30 1.78 1.38 1.90 1.42 1.94 1.48 2.10 1.51 2.12 1.58 2.16 1.62 2.5iO 24 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 5 in. Bin. 7in. 5in. Gin. 7 in. 5 in . Gin. 7 in. Gin. 7 in. Sin. 6in. 7 in. Sin. Cut and Formed . . Complete 1.C6 1 50 1.10 1.54 1.14 1.58 1.22 1 70 1.26 1.74 1.32 1.80 1 38 1.92 1.42 1.96 1.48 2.02 1.52 2.16 1.64 2.22 1.68 2.26 1.76 2.38 1.82 2.44 1 85 2 48 26 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. X ctSU VV KlMl 5 in . 6 in. 7 in . 5in. Gin. 7 in. Gin. 7 in. 8 in. Gin. 7 in. Sin. Gin. 7 in. Sin. Cut and Formed. . Complete 1.24 1.72 1.28 1.76 1.32 1 80 1 40 1 94 1 44 1 .98 1.48 2.02 1 62 2.20 1 66 2.24 1.72 2.30 1.78 2.4'J 1.84 2.46 1.88 2.50 1.94 2 64 2.00 2.70 2 04 2.74 23 in. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. Gin. 7in. Sin. Gin. 7 in. Sin. Gin. 7in. Sin. Gin. 7 in. Sin. 7in. Sin. 9 in. Cut and i'ormea. Complete 1.42 1.. 2.68 3.42 8in. 2.74 3.48 15 Inches. 2.90 3.74 7 in. 3.00 3.84 Sin. 3 06 3.90 16 Inches. 3.46 4.38 9in. 3.56 4.48 17 Inches. 7in. IG Inches, 7 in. 3.80 4.80 8in. 3.86 4.86 9in. 3.98 4.98 17 Inches. Sin. 9in. lOin 4.24 5.36 4.36 5.48 4.44 5 56 3 78 4.80 3.86 4.88 9 in. 3.98 5 00 18 Inches. 4.30 5.42 9in. 4.42 5.54 lOin. 4.48 5.60 10 Inches. S^n^ 1^0 1 76 6 in. I 7 in. 1 36 1.82 1.46 1.92 11 Inches. 1.45 1.94 6in. 1.54 2.02 7 in. 1 54 2.12 12 Inches. 1.70 2.24 Gin. 1 80 2.34 7 in. 1 90 2.44 13 Inches. 51n. 192 2.54 2.02 2.64 7in. 2.12 2.74 14 Inches. 5 in. 2 16 2.86 Bin. 7in. 2.26 2.96 2 38 3.08 15 Inches. 6in. 2 58 3.32 7 in. 2 68 3.42 Sin. 2 74 3 48 16 Inches. Bin. 2.88 3 72 7 in. 3.00 3.84 3 C6 3.90 17 Inches. 7 in. 3.40 4.32 Sin, I 9in. 3.46 4 3.56 .48 18 Inches. 7 in. 3.80 4.82 in. 9 in, 3.85 4.88 3.98 5.00 19 Inches. 4 26 5 38 9in. 4 38 5.50 10 in 4 44 5 56 19 Inches. 4.72 5.94 9 in. 4.85 6 08 10 in, 4.92 6.14 20 Inches. Sin. 4.74 5.96 9in. lOin 4.94 B 16 21 Inches. 5.20 6.54 9 in. 5.32 6.06 lOin 5.40 6.74 12 Inches. 5 in Gin. 1 44 1 52 1.92 2.00 7 in. 1.62 2.10 13 Inches. Sin. 1.64 2.20 6in. I 7in. 1.74 2.30 1 84 2.40 14 Inches. 5in. 1 92 2 54 2.02 2.64 7 in. 2 12 2.74 15 Inches. 5in. 2 15 2.82 2.26 2.92 7in. 2.38 3.04 16 Inches. 6in. 2.54 3.28 7 in. 2.66 3.40 2.70 3.44 17 Inches. 2.88 3.70 7 in. 00 3.04 3.86 18 Inches. 3 24 4.16 7in. .36 Sin. 3.40 4.3i 19 Inches. 3.76 4.76 8 in. I 9in, 3.82 4.82 3. 94 4.94 20 Inches. 4.18 5.30 Sin. 9in. 4.24 5.36 4.36 5.48 21 Inches. 4.72 6.94 9in. 4.84 6.06 lOin. 4.90 6.12 22 Inches. in. 9in. lOin 5.20 6.52 5.32 6 64 23 Inches. Sin. 9in. lOin 5.70 7.10 5.84 7.U 5.92 7.32 .1 L 16 Inches. 5 in. I Gin. 7in , 2.16 2 84 2.25 2.94 2.35 3 04 17 Inches. 5 in. 6 in. 7 in 2.44 3 10 2 54 2,64 3.20 3 30 18 Inches. in. 7 in. 8 in 2.85 2.98 S.Oii 3.68 3.80 3.84 19 Inches. 6 in. 3.20 4 12 7 in. 3.32 4.24 3.35 4. 28 20 Inches. 7 in. Sin. 9 in. 3 72 3.78 3 88 4.72 4.78 4.88 21 Inches. 7in. Sin. 9in 4.15 5.28 4.22 5.34 4.34 5.46 Inches. 7 in. I Sin. I 9 in. 4 54 5.86 4.70 5.92 4.82 6.04 23 Inches. Sin. 9in. 5.18 6 50 5 32 6.64 lOin, 5.38 6.70 24 Inches. in. 9in. lOin 5.70 5.82 7 10 7 22 5.90 7 30 25 Inches. 6.26 7.76 9in. 6.40 7.90 10 in 6.48 7.98 Sizes marked with star are priced as Corbels; that is, without Top-Moulding. THE KITTREDGE CORNICE AKD OlllS'AMEIsT C03IPAKY. 09 DESIGN No. 832. Note. Face: Plain and Square Sink with Leaf. Sides: Sunk Panel. -This design is to be regarded as a type of a class. The following figures arc applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. Sec Introductory Note, Page 27. Scale: H inch = 1 foot DEPTH. IC in. 13 in. :2 i3. 24 ia. 23 in. 23 in. 30 in. 32 in. 34 in. Projection Face Width. Cut and Formed Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width. Cut and Formed Complete Projection Face Width Cut ana i'ormea. Complete Projection Face Width . (JutauU i oruied Complete Projection Face Width. cut and Formed. Complete Projection Face Width. (Jut and Formed. Complete Projection Face Width . Cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and i'ormcd. Complete Projection Face Width Cut and Formed. Complete 6 Inches. 5 in. .82 1 .38 Gin. .90 1.46 *7 Inches. 5 in. 1.(54 1.04 l.-iS *8 Inches. 5 in. 6 in 1.12 l.b8 1 20 1.06 *9 Inches. 5 m. 1 30 2.14 6in. 1.33 2 22 10 Inches. Sin. 6 in. 7 in. 1.36 2.24 1.46 2.34 1.56 2.44 11 Inches. 5 in. Gin. 7 in 1.58 2.56 1.68 2.06 1.78 2.76 12 Inches. Gin. 1.86 2 94 7 in. 1.98 3.06 Sin. 2.02 3.10 13 Inches. 6 in. 2.06 3.22 7in. 2.18 3 34 Bin. 2.22 3.38 14 Inches. 6i... 2.30 3.58 7in. 2.42 3.70 2.45 3.74 15 Inches. 7 in. 2.70 4.10 2.75 4.16 •)in. 2. 83 4.28 16 Inches. 3.02 4.56 Sin. 3. 03 4.62 9 in. 3.20 4.74 17 Inches. 3.30 5.00 9 in. 3.42 5.12 10 in. 3.50 5 20 8 Inches. 5 in. 1.64 6 in. 1.04 1.72 *9 Inches. 5in. 1 12 1.88 Gin. 1.20 1 .96 10 Inches. 5 in. 1.18 1.96 1.25 2.04 11 Inches. 5 in. I 1.38 2.24 1.48 2.34 12 Inches. 5 in. 1.56 2 54 Gin. 1.66 2.64 1.78 2 76 13 Inches. 5in. Gin. 7in 178 2.86 1.88 2 96 1.98 3.06 14 Inches. 2.08 3.24 7 in. 2.18 3.31 8in. 2.24 3 40 15 Inches. 6 in. 2.32 3.60 2.42 3.70 Sin. 2.48 3.76 16 Inches. 7 in. 2.72 4.12 2.78 4.18 9in. 17 Inches. 3.00 4.56 4.64 9 in. 3.20 4.76 18 Inches. Sin 9 in. 3.36 5.06 5.18 lOin. 3.54 5.24 19 Inches. 3.62 5.48 9 in. 3.76 5.62 10 in. 3.^2 5.68 10 Inches. 5in. TToT 1 78 Gin. I 7 in. 1 10 1.81 1.20 1.94 11 Inches. 5in. Gin. 1.16 1.94 1.24 2.02 7 in, 1.34 2.12 12 Inches. 1.38 2.24 1.48 2.34 7 in. 1 58 2.44 13 Inches. 5in. 1.55 2.54 1.66 2.64 7in. 1.76 2.74 14 Inches. 5 in. 1.76 2.84 Gin. 1.86 2.94 7 in. 1.98 3.06 15 Inches. Gin. Tin. 2.18 3.34 2.24 3.40 16 Inches. Gin. 2 30 7 in. 2 42 3.70 Sin. 3 76 17 Inches, 7 in. 2. ',2 4.12 2.73 4.18 9 in. 2.58 4.28 18 Inches. 3.02 4.f8 8 in. 3.08 4.64 .20 19 Inches. Sin. 3 32 5.02 9 in. 3.44 5 14 10 in 3 50 5 20 20 Inches. Sin. I 9 in. 3.64 5.50 3.76 5.62 10 in 3.84 5 70 21 Inches. 3.92 5.92 9 in. 10 in, 4.04 6.04 4.12 6.12 12 Inches. 5in 1.14 1 92 Gin. i 7 in. 1 22 2.00 132 2.10 13 Inches. 5in. Gin. 1.32 2.20 1.42 2.30 7in. 1 52 2.40 14 Inches. 5in. Gin. 7 in 1.56 2.54 1.56 2.64 L76 2.74 15 Inches. 5in. I Gin. I 7in. 1.75 1.86 1.98 2.82 2.92 3.04 16 Inches. in. 7 in. 2.04 3.20 2.15 3.32 2.20 3.36 17 Inches. in. 7 in. Sin. 2 30 3.56 2 42 2.46 3.68 3.72 18 Inches. 2.55 3.96 7in. Sin. 2.68 4.08 2.72 4.12 19 Inches. 7 in. 2.98 4.52 8 in. I 9in, 3.04 4.58 3.16 4.70 20 Inches. 3.24 4.94 Sin. 3.30 5.00 9 in. 3.42 5.12 Jl Inches. 8in. 3.62 5.48 9in. 3.74 5.60 lOin. 5.66 Inches. Sin. 3.92 5.90 9 in. 4.04 G.02 10 in. 4.12 G.IO 23 Inches. Sin. 4.22 6.34 9 in. 4.35 6.48 10 in 4.44 6.56 16 Inches. 5 in. 1 76 2 82 Gin. 1.86 2.92 7in, 1.96 3 02 17 Inches. 5 in. "iTsT 3.10 6 in 2.04 3.20 7 in. 2.14 3.ao 18 Inches. Gin. 3.54 7 in. I Sin. 2.40 3 66 2-44 3.70 19 Inches. Gin. 2.52 3 92 7 in. Sin 2.64 4.04 2.t8 4.08 20 Inches. 7 in. 2.94 4.48 Sin. 9in, 3.00 4.54 3.10 4.(i4 51 Inches. in. Sin. 9in 3.22 4.92 3.40 5.10 Inches. 7in. 3.54 5.40 Sin. 9 in. 3.60 5.46 3.72 5.58 23 Inches, Sin. 3.90 5.88 9 in, 10 in 4.04 6.02 4.10 6.08 24 Inches. in. 9in. 4.22 6.34 4.34 G 46 4.42 G 54 25 Inches. 4.56 6.82 9 in. 4.70 6 96 lOin 4.78 7.04 Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. 70 THE KITTREDGE CORNICE AKD ORIn'AMEKT COMPANY. DESIGN No. 833. Face: Plain and Squrre Sint with Leaf. Sides: Sunk Scrolled -Panel. Note.— This design is to be rcgan ed as a type of a class. The following figures are applicable to all Brackets possess ng the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. Scale: M inch = 1 foot. DEPTH. IG ia. "6 Inches. "8 Inches. 10 Inches. 12 Inches. Face Width 1 5 in. 1 G in. 1.42 i 1.50 5in. Gin. 5 in. 6 in. 7 in. 5in 6 in. 7in. Cut and Formed . 1 Complete .98 1 .66 1.C5 1.74 1.08 1 88 1 14 1.91 1.24 2.04 1.20 2 06 1.28 2.14 1.38 2.24 13 in. *7 Inches. *9 Inches. 11 Inches. 13 Inches. Face Width 5 in. Gin. 5in. Gin. 5in. Gin. 7 in. 5in. 6 in. 7in. Cut and Formed. . . . Complete .S8 1 66 1.06 l."i4 1 12 1.88 1. 20 1.96 1.22 2.08 1.30 2.16 1 40 2.26 1.38 2.34 1.48 2.44 1 58 2.. 54 20 in. *8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches. Face Width 5 in. Gin. 5 in. Gin. 5 in. 6 in. 7 in. 5 in. Gin. 7 in. 5 in. Gin. 7in . Cut and Formeu Complete 1.12 1 .88 1 20 1.U6 1.24 2.10 1.32 2.18 1.44 2.38 1 54 2.48 1 64 2.58 1 62 2 68 1.72 2.78 1 82 2.88 1 82 2 M 1.92 3.06 2.C2 3 16 22 in. *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face Width 1 5 in. 6in. 5 in. Gin, 5in. Gin 7in. 5in. Gin. 7in. 5 in. 6 in. 7in. Cut and Formed — 1 32 2.16 1.40 2 24 1.44 2.38 1.54 2.48 1.62 2 68 1.72 2.78 1.82 2.88 1.82 2 96 1.92 3,06 2.04 3.18 2 02 3.V8 2 12 3.38 2.22 3 48 24 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. 6in. 7 in. 5 in. Gin. 7in. 5 in. Gin. 7 in. 6 in. 7in. Sin. Gin. 7 in. 8in. v^ut and Formed 1.42 2 88 1.52 2.43 1.52 2.58 1.62 2 (i8 1.72 2. '■.8 I.b4 2 9j 1 h2 2.98 1.92 3.08 2.04 3.20 2.12 3.38 2 24 3. 5 J 2.28 3.54 2. '-6 3.72 2.43 3 84 2 &2 3.88 26 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches, Face Width 5 in. 6in. 7 in. 5in. 6 in. 7 in. Gin. 7 in. Sin. Gin. 7in. Sin. Gin. 7 in. 8 in. (Jut and Formed 1.64 2.70 1 74 2.80 1.84 2.90 1.84 3.00 1,94 3 10 2.04 3.20 2.16 3.42 2.25 3.52 2.32 3 58 2.38 3.74 2 50 3.86 2.54 3 90 2.60 4.10 2 72 4.22 2 76 4.26 23 In. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width 6 in. 7 in. 8in. Gin. 7in. Sin. Gin. 7 in. Sin. Gin. 7in. 1 Sin. 7in. Sin. 9 in. Cut and Formed Complete 1.92 3 08 2.04 3.20 2.08 3 24 2.16 3.42 2.25 3.52 2.32 3.58 2.38 3.76 2 50 3.88 2.56 3 94 2.64 4.14 2.76 4.26 2.80 4.30 3 00 4.62 3 06 4.68 3.16 4 78 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7in. Sin. Gin. 7in. Sin. Tin. Sin, 9in. 7 in. Sin. Oin, 7in. Sin. 9in Cut and Formed 2-14 3 40 2.26 3 52 2.30 3.16 2.40 3.78 2.50 3.88 2 55 3.94 2.80 4.30 2.86 4.36 2.95 4.46 3.04 4.GG 3.10 4.72 3.22 4.84 3.32 5.10 3.38 5.16 3.50 5.28 32 in. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width Giu. 7 in. Sin. 7in. Sin. 9 in. 7 in. 1 Sin. 9 in. 4.90 7 in. Sin. 9 in. 7 in. Sin. 9 in Cut and Formed 2.38 3.76 2.50 3.88 2.54 3.92 2.80 4.30 2.86 4.36 2.96 4.4G 3.08 4.72 3.14 4.78 3. 34 5.12 3.40 5.18 3.52 5.30 3.64 5.58 3,70 5.64 3.82 5.76 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width 7in. Sin. 9in. 7 in. Sin. 9in. Sin. 9in. 10 in . Sin. 9in. lOin. 8in. 9in. lOin. Cut and Formed 2.78 4.28 2.84 4.3i 2 96 4.46 3.05 4.70 3 14 4.78 3.25 4 90 3 42 S.'iO 3 54 5.32 3 60 5 38 3.72 5.66 3.84 5.78 3.90 5.84 4.00 6.08 4 14 6.22 4 20 6.28 36 in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width 7 in. Sin. 9 in. Sin 9in. 10 in. 8in. 9 in. lOin Sin. 9in. Klin Sin. 9 in. lOin Cut and Formed .... Complete 3.08 4.70 3.14 4.71} 3.26 4.88 3.45 5.24 3.58 5.36 3.64 5.42 3.74 5.68 3.86 5.80 3.94 5 88 4.02 6.10 4,14 6 22 4 22 6.30 4 32 6 54 4.44 6 66 4. 52 6 74 33 in. Projection 17 Inches. 19 Inches. 21 Inches. 23 Inches. 25 Inches. Face Width Sin. 9in. lOin. 8in 9 in. lOin. 8in. 9in. 10 in. Sin. 9in. lOin 8 in. 9in. lOin. Cut and Formed Complete 3.40 5.18 3.52 5 30 3.50 5 33 3.72 5.G6 3.86 5.E0 3.92 5.86 4.02 6.12 4.14 6.21 4.22 6 32 4.32 6.54 4,45 6.68 4.54 6.76 4.58 7.04 4 82 7.18 4.90 7.26 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. THE KITTllEDGE COllJ^'ICE AIn^D OKKAMENT COMPANY. 71 DESIGN No. 834. Face: Plain, and Square Sint, with Leaf. Sides: Sunk Scrolled -Panel, with Stamped Ornament. Note.— This design Is to be regarded as a tj'pe of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. Scale: ^inch = 1 foot. DEPTH. 16 in. 18 in. 2C in. 12 in. 24 in. 26 in. 23 in. 30 in. 32 in. 34 in. 35 in. 33 in. Projection Face Width Cut and Formed Complete Projection Face Width Cut anil jboiiuo>-<. Complete Projection Face Width. Cut and Formeu . Complete Projection Face Width, Cut and Formed Complete Projection Face Width. (Jut and Formed . Complete Projection Face Width . Cut and Formeu Complete Projection Face Width. Cut and i?'oi-mea. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete . . Projection Face Width. Cut and Formed. Complete Projection Face W^idth. Cut and Formed. Complete 6 Inches. 1.58 G in. 1.05 1.66 *7 Inches. 1.16 1 68 6 in. 1.24 1 96 *8 Inches. 5in. 1.34 2.14 1 42 *9 Inches. 5 in. 1.58 2.46 6in. i.ee 2 54 8 Inches. 10 Inches. 5 in. 1.78 2.82 m. 1.88 2 92 7 in. 1.98 3.02 11 Inches. 5 in. 2.04 3.20 Gin. 2.14 3.30 Tin. 2.24 3 40 13 Inches. Gin. 2.38 3.64 7 in. 2.50 3.76 8in. 2 54 3.80 13 Inches. G in. 2.66 4 04 7in. 2.82 4.20 14 Inches. Giu. 2.98 4.48 Tin. 3.10 4.60 Sin. 3.14 4.64 15 Inches. 3.45 5.10 Sin. 3.52 5.16 9 in. 16 Inches. 7 in. 3 84 5.60 Sin. 3. 90 5.66 9 in. 4.02 5.78 17 Inches. Sin. 9in. 4.25 6.20 4.38 6 32 lOin. 4.46 6.40 5 in. 1.16 1 .bS G in. 1.24 1..96 "9 Inches. 1 34 2.14 Gin. 1 42 2.22 10 Inches. 5 in. 1.58 2.50 6in. 1.66 2.58 11 Inches. 5 in. Gin 1.80 l.^Q 2.82 2.92 12 Inches. 5in. Gi 2.02 3 18 2.12 3.28 7 in. 2.24 3 40 13 Inches. 5in. 2.30 3 56 6in. 2.40 3.66 7 in. 2.50 3.76 14 Inches. 2.68 4.06 2.78 4.16 Sin. 2.84 4.22 15 Inches. Tin. Sin. 16 Inches. Tin. 3.48 5.12 3.54 5.18 9in. 3.64 5.28 17 Inches. 3 82 5.60 Sin. 3.90 5.68 9 in. 4.02 5.80 18 Inches. Sin 4.32 6.26 9in. lOin 4.44 6.38 4.50 6.44 19 Inches. Sin. 4.58 6.TS 9 in. 4.82 6 92 lOin, 10 Inches. 5 in. 1.40 2 2«) Gin. I Tin. 1 46 2.32 1 53 2.42 11 Inches. 5 in. 1.55 2.48 Gin. 1.64 2 .56 T in. 1 74 2.66 13 Inches. 1.20 2.82 6in. 1 90 2.92 T in. 2 00 3.02 13 Inches. 2 02 3 18 Gin 2 12 3.28 Tin. 2.22 3.38 14 Inches. 5 in. Gin. 2.28 3.54 2.38 3.64 7in. 2.50 3.76 15 Inches. 2.68 4. 06 7in. 2.78 4.16 Sin. 2 84 4 22 16 Inches. Gin. 2.93 4 48 7 in. 3.10 4.60 Sin. 3 15 4.66 17 Inches. T in. 3.48 5.12 in. 9in. 3.54 5.18 3.54 5.28 18 Inches. T in. 3.84 5. 62 3.90 5. 68 4.02 5.80 19 Inches. Sin. 4.28 6.22 9in. 4.40 G.34 10 in 4.46 6 40 20 Inches. 8in. 4.70 6. SO 9in. G 92 lOin 4 90 T 00 21 Inches. Sin. 9 in. 5.20 7.48 lOin 5.28 7.56 12 Inches. 1 54 2 46 Gin. 1 Tin. 1 62 2.54 1.72 2.64 13 Inches. 5in. 1.74 2.78 6 in. 1.84 2.88 7i' 1.98 14 Inches. 5in. 2.C2 3 18 6 in. 2.12 3.28 7 in. 2 22 3 38 15 Inches. 5in. 3.52 6 in. 7in, 2.50 3.74 16 Inches. 2.64 4 02 7 in. 2.75 4.14 Sin. 2.80 4.18 17 Inches. Gin 2.98 4.46 7in. T7io 4.58 3.14 4.62 18 Inches. 6 in. 3 32 4.96 7in. 3.44 5. OS Sin. 3.48 5.12 19 Inches. 7 in. 3.80 5.56 Sin. I 9in, 5.62 3.98 5.74 20 Inches. 7 in. 4.20 6.14 Sin. 4.25 6.20 9 in. 4.38 6.32 21 Inches. 8 in. 4.68 6.78 9in. 4.80 G.90 lOin. 4.86 6. 96 23 Inches. Sin. 5.08 7 34 9in. 5.20 7.46 10 in, 5.28 7.54 23 Inches. 5.50 7.90 9 in. 5.64 8.04 lOin 5.72 8.12 16 Inches. 5 in. 2 28 3. '2 6in. 2.38 3.02 2.48 3 72 17 Inches. 2.i4 3,92 6 in. 2 64 4.02 7in. 2.74 4 12 18 Inches. 6in. 2.95 4 41 7 in. I 8 in. 3,08 4 16 3.12 4. CO 19 Inches. 6 in. 3.L8 4 92 7 in. 3.40 5.04 Sin. 3.44 5.08 20 Inches. 3,76 5 52 Sin. 3.82 5.. 58 3.92 5.08 21 Inches. in. Sin. 4.18 6 12 4.24 G.18 9in 4.36 6.30 32 Inches. 7in. 4.50 6,70 Sin. 4.66 6.76 4.78 6.88 23 Inches. Sin. 5.06 T.32 9in. 5,20 7.46 lOin 5.26 T.52 34 Inches. Sin. 9in. 5. 50 T 90 5,52 8.02 10 in 5.70 8 10 35 Inches. in. 9 in. 10 in. 6 14 S.TO 6.22 8.T8 Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. 72 THE KITTREDGE CORKICE AKD OEJ^AMEKT COMPANY. DESIGJT No. 835. Face: Plain, and Square Sink, with Leaf. Sides: Incised. -This design is to he regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patter::^s extra in all cases. See Introductory Kotc, Page 27. Scale: }X inch = 1 foot. DEPTH. IG in. 13 in. 20 in. 22 in. 2i in. 28 in. 23 in. CO in. 33 in. Projection Face Width. Cat and f ormed Complete Projection Face Width. ^ut and Fornicu.. Complete Projection Face Width Cut and Formed . Complete Projection Face Width. Cut and f ormed Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Jb'ormea Complete * 6 Inches. 5 in. 1 .GO Gin. 1.04 1.68 Inches. sin. 6 in. 1.10 1.18 1 92 8 Inches. 5 in. Gin 1.28 2.10 1.36 2.18 *9 Inches. 5 in. 1.46 2.86 6ni. 1.54 2 44 10 Inches. Projection Fnce Width, cuo and Formed. Complete Projection Face Width.. Cut and Formed . Complete Projection Face Width. Cut and Formed. Complete 5 in. Gin. 7 in. 1.78 3.14 1.88 3.24 1.98 3.34 '8 Inches. 5 in. 1.10 1.84 6 in. 1.18 1.92 *9 Inches. 1.28 2.10 1.36 2.18 10 Inches. 1.56 2.78 1.64 2.8G 11 Inches. 5 in. Gin 1.80 3.14 1.90 3.24 12 Inches. 5 in. Gin. 7 in. 2 02 3 54 2.12 3.<4 2.24 3 7G 11 Inches. 5in. Gin. 7 in. 2.04 3 56 2 14 3.GG 2.24 3 7G 12 Inches. Gin. 7in. Sin. 2 36 4.02 2.48 4.14 2 52 4.18 13 Inches. Gin. 2.62 4.42 7in. 2.74 4.54 Sin. 2.78 4.. 58 14 Inches. 2.88 4.84 Tin. Sin. 3.00 4.96 3.04 5.00 13 Inches. 5in. I Gin, 7 in 2 23 3 94 2.38 4.04 2.48 4.14 14 Inches. Gin. 7in. Sin. 2.64 4.44 2.74 4.B4 2.80 4.60 15 Inches. in. 7in. Sin 2.90 3.00 3.06 4.86 4.96 5.02 16 Inches. 7in. Sin. 9in. 3.32 5.44 3.38 3.48 5.50 5. GO 10 Inches. 5 in. 1.36 3 48 in. 1 7 in. 1 42 2.54 1.52 2.64 11 Inches. 5in. 1.54 2.76 1.62 2.S4 7 in. 1.72 2.94 12 Inches. 1.20 3.14 6 in. 1.90 3.24 2 CO 3.34 13 Inches. 2.12 3.64 7in. 2.22 3.74 14 Inches. 5 in. 2 26 3.92 Gin. I 7i 2.35 4.02 2.48 4,14 15 Inches. Gin. 2 64 4.44 7 in. 2.74 4.54 Sin. GO 16 Inches. 2.83 4 b4 7 in. Sin. 3.00 4.96 3 C6 5.02 17 Inches. 7 in. 3.32 5.44 5.50 3.48 5. GO 18 Inches. 7 in. Sin. 9 in 3.64 5.94 3.70 G.OO 3.82 6.12 12 Inches. 1 52 2.74 6 in. 1 7 in. 1.60 2.82 1.70 2.92 13 Inches. 5in. 1.74 3.10 6in. 1.84 3.20 7in. 1 94 3.30 14 Inches. Sin. I Gin. 2.02 2.12 3 54 3.64 7 in. 2 22 3.71 15 Inches. 5in. 2.26 3.90 Gin. 2.35 4.00 7 in. 2.48 4.12 16 Inches. 2.50 4.40 7 in. 4.52 2.76 4.56 17 Inches. 6in 7in. 2.88 4.82 3.00 4.94 3.04 4.98 18 Inches. 6 in. 3 16 5.28 7 in. 3.28 5.40 Sin. 3.32 5.44 19 Inches. 7 in. 3.60 5.88 8 in. I 9 in. 3.66 5.94 3.Y8 6.06 20 Inches, 7 in. 3.92 6.40 Sin. I 9: 3,98 6.46 4.10 6.58 10 Inches. 5 in. 2.25 3 <.;o Gin. 2.36 4.00 7 in, 2.46 4 10 17 Inches. 2.53 4. 30 Gin. 2.10 4.40 2.<0 4 5U 18 Inches, Gin, 2.86 4.80 2.98 4 92 Sir 3.02 4.96 19 Inches, 6 in. 3 12 5 24 7 in. Sin, 3,28 5.40 20 Inches. 7 in. 3 56 5.84 Sin. 9 in. 3.62 5.90 3.72 6.00 21 Inches. 7 in. 3,90 6.38 3.96 6.44 9 in 4.08 6.56 22 Inches, 7 in. 4.26 6.94 4.32 7.00 9 in. 4.44 7.12 34 in. 33 in. 33 in. Projection . 15 Inches, 17 Inches, 19 Inches, 21 Inches, 23 Inches, Face Width Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete , . . 3.30 5.42 in. 9in. 7 in. Sin. 9 in. 3.36 3.48 5.48 5. GO 3.62 5.92 3.70 6.00 Sin. 9 in. 10 in 3.82 6.12 4.00 4.12 4 18 6.48 G.GO 6 66 Sin, 4.34 7.02 9in. 4.45 7.14 10 in. 4.68 7.C4 9in. 4 82 7.68 lOin. 16 Inches, 7 in. 3.64 5.92 Sin. 9in 3.70 5.98 6.10 17 Inches. 3.98 6.46 9 in. 10 in 4.10 6.58 4.18 6. 66 18 Inches, in. 9 in. 10 in 4.04 6.52 4.15 6.64 4.22 6.70 19 Inches, 8in. 9 in, 10 in 4.34 7.02 4.48 7,16 4.54 7.22 20 Inches. Inches, 24 Inches. Sin. 9in. lOin 4.36 7.04 4.48 7.16 Sin. 4.55 7 24 4.70 7.56 9in. 4.82 7.68 10 in Sin. 4.90 7.76 9in. 5.18 8 22 5.26 8 30 21 Inches, Inches, 25 Inches. Sin. I 9 in. 10 in 4.70 7. 58 4.82 7.70 Sin, 4.90 7.78 5.05 8.10 9 in. 5.20 8.24 lOin 8.32 5.44 8.66 9in, 5 58 8 SO 5.66 8.88 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. DESIGN No. 836. Face : Plain, with Rosette, and Square Sink with Leaf. Sides: Plain. Note.— This design Is to be regarded a? a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 2" Scale: }i inch = 1 foot DEPTH. IG in. IS in. :2 in. M in. 23 in. coin. 31 in. 3G in. 33 in. Projection Face Width . Cut and Formed Complete Projection Face Width. Cut and l ormea. Complete Projection Face Width Cut and Formeu. Complete Projection Face Width. Cut and I'oini^d Complete Projection Face Yv'idth. Cut ana Formea. Complete Projection Face Width . *^utand Formea Complete Projection Face Width. v.ut and iormecl. Complete Projection Face Width. Cut and Formed Complete Projection Face Width. (.u(, and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed . Complete 6 Inches, 5 in. 1.10 Gin. .96 1.524 Inches. 5 in. Cin. 1.08 1.40 8 Inches. 5 i n . 1.08 1 .42 Gin. 1.22 1.5G ''9 Inches, 5 in. 1 24 1.60 Gin. 1.38 1 'i4 10 Inches. 5 in. Gin. 1.34 1.8G 1.50 2.02 7 in. 1.65 2.20 11 Inches. 5 in. 1.54 2.12 Gin. 1 70 2.28 1.86 2.46 12 Inches. Gin. 1.86 2.50 2,04 2.70 Sin. 2.14 2 80 13 Inches. Gin. 2.05 2 74 7in. 2.34 2.94 Sin. 2.34 3.04 14 Inches. 2.28 3 04 7 in. 2.4S 3.24 2.56 3.34 15 Inches. 2.72 3.56 Sin. 2.84 3. OS 9in. 3 04 3.88 16 Inches. 7 in. Sin. 3.12 4.04 9 in. 3 32 4.-:;4 17 Inches 3.34 4.36 9in. 3.54 4 56 lOin. 3.72 4 76 ••^8 Inches. 5in. "~94 1.26 Gin. *9 Inches. 1 08 1.42 Gin. 1.22 1.5G 10 Inches. 5 in. 1.18 1.64 Gin. 1.32 1.7S 11 Inches. 5 in. 1.35 1.86 6in, 1.52 2.02 13 Inches. 1.52 2.10 Gin. 1.68 2.26 1.86 2 46 13 Inches. 1.72 2.36 6 in. 1.88 2 52 7 in 2.04 2.70 14 Inches. 6 in. 2 08 2 76 7ic. 2.24 2.94 Sin. 2.36 3 06 15 Inches. ! 2.30 3.06 7 in. 2.46 3.24 Sin. 3.36 16 Inches. 2.74 3.5S 2.86 3.70 9 in 3.04 3.88 17 Inches. 2.28 3.92 Sm. 9 in. 3.32 4.26 18 Inches. Sin 9 in. 3.40 4.42 3.60 4.62 3.76 4.80 19 Inches. 8 in { 9 in. 1 10 in 3.64 3.25 4.02 4.76 4.98 5.16 10 Inches. 1.04 1 48 7 in. 1 16 1.60 1.32 1.78 11 Inches. 1.15 1.62 6 in. 7 in. 1.45 1.94 12 Inches. 1.36 1.86 Gin, 1 52 2.02 7 in. 1 68 2.^0 13 Inches. 5ir). G in. 1.68 2.26 7 in. 1.84 2.44 14 Inches. 5 in. 1 70 2.34 Gin. 7 in. 1.86 2.50 2.04 2.70 15 Inches, Gin. 2.08 2.76 2.24 2.94 Sin, 2.35 3 06 16 Inches. Gin. 2 28 3. (.4 7 in. 2 46 3.24 2 58 3 36 17 Inches. 7 in. 2.74 3.58 Sin, 9in 2.86 3.70 3.04 3.88 18 Inches. 7 in. 3.00 3.94 Sin, 9 in 3.12 4.06 4.26 19 Inches, Sin. 3 35 4 28 9 in. 10 in 3.56 4.58 4 "6 20 Inches, Sin. 9 in. 10 in 3.85 4.04 4.98 5 IS 21 Inches. 8 in. I 9 in. [10 in 3.92 5.14 4.12 5.31 4.30 5.54 12 Inches. 5in I G in. j 7 in. 1 14 1 28 1 60 1.74 1.44 1.92 13 Inches. 5 in. 1.30 1.82 Gin. 1.45 1.9S 7in. 1.62 2.16 14 Inches. 1.52 2.10 Gin, 1.68 2.26 7 in. 2.44 15 Inches. 16 Inches. 5 in. Gin. 7 in. 1 70 2 fc2 1.85 2.48 2.02 2 C6 17 Inches. 1.70 2.32 Gin. 1.86 2.48 7 in. 2.04 2.68 16 Inches. 6in. 2.04 2.72 7 in. 2.22 2.92 Sin. 2.32' 3.02 17 Inches. 6 in. 2,28 3.02 7 in. 2 46 3.22 Sin. 2.55 3.32 18 Inches. Gin. X52' 3.34 2.70 3.54 Sin. 2.80 3.64 19 Inches 7 in. 2.96 Sin. 3.08 4.00 9!n. 3.28 4.20 20 Inches. 3.22 4.24 Sin, I 9 in. 3.34 3.54 4.56 21 Inches. Sin. I 9 in. 10 in 3.84 4.96 4.00 5.14 22 Inches. Sin, 9in. lOin 3.92 5.12 i.l2 6.32 4.30 5.52 23 Inches. o m. j 6 in. I 7 in. l.b8'XC4" 2.56 2.72 2,20 2 90 Sin. I 9 in. 4.20 5.48 4.42 5.70 10 in 4.60 5.90 18 Inches. Gin. '272T 3.00 7 in. 3 20 Sin. X54 3.30 19 Inches. Gin. 2.48 3.30 7 in. I Sin, 2.66 3.50 2.75 3.60 20 Inches. 7 in. 2,92 3.84 3.04 3.9!i 9 in. 3.22 4.14 21 Inches. 3.20 4.22 3.32 4.34 9in 3.52 4.54 22 Inches. 7 in, X50" 4.62 Sin. 3 52 4.74 9 in "3.82 4.94 23 Inches. Sin. 9 in. 10 in 3.90 4,12 4.28 5.10 5.32 5.50 24 Inches. Sin. 9 in. 10 in 4 20 5 48 4.40 5 68 4.58 5 88 25 Inches. 1 9 in. 4.52 4.74 5. 88 6.10 10 in, 4.92 6.30 * Sizes marked with star are priced as Corbels; that is, without Top-Moulding. 74 THE KITTEEDGE COKNICE AKD ORI^"AMENT COMPANY. DESIGN No. 837. Face: Plain, with Kosette, and Square Sink with Leaf. Sides: Plain, wilh Stamped Ornament. Note. — This design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. See Introductory Note, Page 27. Patterns extra in all cases. Scale : M inch = 1 foot. DEPTH. 16 in. 13 in. 2Cin. £2 in. 24 in. 26 in. 23 in. 30 in. 32 in. )i in. 3C in. 33 in. Projection Face Width (Jut and Pormed Complete Projection Face Width. Cut and Pormeu. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and i^'ormed Complete Projection Face Width. Cut and Formed. Complete Projection Face Width . Cut and J^'ormed Complete Projection Face Width. cut and l ormed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. cut and Formed. Complete Projection Face Width . Cut and Formed. Complete . . Projection Face Width Cut and Formed. Complete Projection Face W^idth Cut and Formed. Complete , . . "•^6 Inches. 5 in. 6 in. l.iO 1.42 1.24 1..56 •7 Inches. 5 m. 1.25 1 02 Gin. ■^="■8 Inches. 1.44 1.84 6 in. 1 58 1 98 *9 Inches. 5 in. 1.64 2.06 Gin. l.?8 2.20 10 Inches. 5 m. 1.82 2.42 6in. 1.98 2.58 7 in. 2.14 2.76 11 Inches. 5 in. 2.08 2.74 2.24 2.90 7 in. 2.40 3.08 12 Inches. 2.46 3.20 7in. 2.64 3.40 Sin. 2.74 3,50 13 Inches. Gin. 2.76 3 54 2 94 3.74 Sin. 3.04 3.84 14 Inches. 3.08 3.96 7in. 3.26 4.16 Sin. 3.36 4. 26 15 Inches. 7 in. 8 in. 3.64 4.62 3.76 4.74 9in. 3.96 4.94 16 Inches. 4.10 5.12 Sin. 4.28 5.24 9 in. 4.42 5.44 17 Inches. 9in. 4.22 5.94 10 in. 4.40 6 14 8 Inches. 5 m. T726 1.02 1.40 1.76 •^9 Inches. 5in. 1 44 1.S4 6in. 1.98 10 Inches. 5 in. 1.62 2.14 6 in. 1.76 2.28 11 Inches. 5 in. 1.84 2.42 2.00 2.58 12 Inches. 5 in. 2 06 2 72 in. 7 in. 2.22 2.88 2.40 3 08 13 Inches. 5in. 2 32 3.06 6 in. 7 in, 2.48 3.22 2.64 3 40 14 Inches. 6in. 2.78 3.50 7iTi. 2.94 3.14 Sin. 3 C6 3.b6 15 Inches. 6 in. 3.10 3.98 7 in. 3.26 4.16 Sin. 3.38 4.28 16 Inches. 7in, 3.66 4.61 8 in. 3.78 4. 76 9in. 3.96 4.94 17 Inches. 4.04 5.12 Sin. 4.18 5.26 9 in. 4.38 5.46 18 Inches. Sin 9in. lOin 4.66 5.80 4.82 6.00 5.02 6.18 19 Inches. Sin 9 in. 10 in. 4.52 4.68 6.54 4.84 6.72 10 Inches. 5 in. 6 in. I 7 in, T-iTTse" 1.72 1."4 2.06 2.24 11 Inches. 1 m. 5in. I TTuo" 1.74 2.12 2.26 7 in. 12 Inches. 1.84 2.42 6 in. 7 in. 2 00 2.58 2 16 2.70 13 Inches. 5 in. 2.06 2 72 6in- 2.22 2.88 7 in. 2.38 3.06 14 Inches. 5in. 6in. 2.30 3.04 2.46 3.20 2.64 3.40 15 Inches. 2 78 3.56 7 in. 2.94 3.74 8in 3 06 3 80 16 Inches. 6in. 3.08 3 96 7 in. I Sin. 3.26 4.16 3 38 4.28 17 Inches. 7 in. Sin. 9 in 3.66 4.64 3.78 4.76 3.96 4.94 18 Inches. 4.06 5.14 in. 9 in. 4.18 5.26 4.38 5.46 19 Inches. Sin. 9 in. 10 in 4 58 4 78 4.94 5.76 5.90 6.14 20 Inches. Sin. 9in. lOin 5.10 6.34 5.30 6.54 5.48 6 74 21 Inches. in. 9 in. 10 in 4.95 6.92 5.10 7.12 5.28 7.32 12 Inches. 1 58 2 10 6 in. i 7 in. 1 72 2.24 1.88 2 .42 13 Inches. 1.V8 2.38 6in. 1.94 2.54 7 in. 2 10 2.72 14 Inches. 5in. I 6in. I 7 2 05 2.22 2.38 2.72 2.88 3.06 15 Inches. 5in. 2 30 3.02 Gin. 2.46 3.18 7 in. 2.64 3. 38 16 Inches. 6 in. 2.74 3 52 7 in. 2.92 3.12 Sin. 3.02 3.82 17 Inches. 6 in 3.08 3 94 7 in. Sin 3.26 4 14 3.35 4.24 18 Inches. 6 in. 3 44 4 40 7in. I Sin. 3. 62 4.00 3.72 4.70 19 Inches. 4.02 5.08 Sin. I 9 in. 4.14 5.20 4.34 5.40 20 Inches. 4.44 5.62 Sin. 4.56 5.74 9 in. 4.76 5.94 21 Inches. 8 in. 5.04 6.32 9in. llOin. 5.24 0.52 5.40 6.70 22 Inches. Sin. 5.58 6.90 9 in. 7.10 lOin 5.96 7.30 23 Inches. Sin. 9in. 5.40 7.48 5.56 7.70 5.74 7.90 16 Inches. 5 in. 6in. 2.30 3.02 2.45 3.18 7 in. 2.62 3 30 17 Inches. 2.b8 3.36 6 in. 2 74 3.52 7in. 2.90 3 70 18 Inches. 6 I n. 3 06 3.92 7in. j Sin. 3.24 4.12 3.g4 4 22 19 Inches. I Sin. 3.58 4.56 3.^8 4.00 20 Inches. 7in. 3.98 5.04 Sin. I 9in. 4.10 5.10 4.28 5.34 21 Inches. 7 in. 4.42 5.00 Sin. 4.54 5.72 9in 22 Inches. 7 in. Sin. 4.90 6. IS 5 02 6.30 9 in. 5.22 6 50 23 Inches. 5.50 6.88 'in. lOin. 5.72 7.10 5.88 7.28 24 Inches. Sin. I 9in. 6.28 7 48 7 (;S lOin 6.46 7. 88 25 Inches. 8in. 5.£0 8.14 9in. 6.05 8.36 lOin. 6.24 8.50 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. THE KITTllEDGE COEJsICE AKD ORXAMEKT COMPANY DESIGN No. 838. Face: Plain, -wit i Rosette, and Square Sink with Leaf. Sides: Sunk Panel. KOTE.— This desig-n Is to be regrardcd as a type of a class. The following figures are applicable to al Brackets possessing the same general features of ornamentation. PATTEnxs extra in all cases. See Introductory Note, Page 27 Scale : M inch = 1 foot. DEPXn. IC in. 13 in. 20 in. 22 in. in. 30 in. 2i in. 3G in. 33 in. Projection . . . Face ^Vi !th out and Complete Projection Face Width. Cut and iormca. Complete Projection Face Width Cut and Formed. Complete Projection ^=■6 IxcnES. 0 in. 1.10 1.10 *7 Inches. 5 in. j Gin. TlO^ 1.82 1.24 1.90 8 Inches. 1.26 2.t6 ()in. 1.40 2.20 *9 Inches. Face Width Cut and i' oimed Complete Projection Face W^idth . Cut and Formed. Complete Projection Face Width . cut and Jj ormed Complete Projection Face AVidth. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed . Complete Projection Face Width Cut and Formed. Complete Projection Face Width . Cut and Formed. Complete Sin. 6in 1 44 2.32 1.58 2.46 10 Inches. 5 in. 6in. 7 in. 1.50 2.42 1.66 2.58 1.82 2 TG 11 Inches. 5 in. 6 in. 7 in. 1.72 1.88 2 04 2.74 2.90 3.08 13 Inches. Gin. 7in. 8in. 2.24 3.38 13 Inches. Gin. 7 in. Sin 2.26 3.4G 2 44 3.CG 2.54 3.7G ■^•"S Inches. 5 in. Tio 1.82 Gin. T24"' -"9 Inches. ."Sin. 14 Inches. Giu. 7in. 8in. 2.50 3.82 2.68 4.02 2.78 4.12 1.26 2.0G Gin. 10 Inches. 5 in. j 6 in. T32""l^ 2.14 11 Inches. 5 in. Gin, 1.52 2.42 1.68 2.58 12 Inches. 5 in. G in. 1 7 in. l.VO 2 72 1.86 2.04 2.88 3 08 13 Inches. 5in. 1 92 3 04 Gin. 2.08 3.20 7 in, 2.24 3.38 14 Inches. in. 7in. Sin. 2.28 2.44 3.48 3.6G 2.56 3.78 15 Inches. Gin. 7in. Sin. 2.52 3.84 2.68 2.80 4.02 4.14 15 Inches. 7 in. Sin. 9 in. 2.96 3.03 4.42 4.54 3.28 4.74 16 Inches. 7in. Sin. 9in. 3.28 4.8S 3.40 5.00 3.60 5.20 17 Inches. Sin. 9 in. 10 in. 3.C2 5.38 3.82 5.58 4.00 5.78 16 Inches. 7 in. Sin. Din. 4.44 3.10 4.56 3.28 4.74 17 Inches. 7 in. 3.26 4.88 Sin. 3.40 5.02 9 in. 3.60 5.22 18 Inches. Sin I 9i 3.68 5.44 3.88 5.G4 10 in 4.04 5.82 10 Inches. 1.18 1 90 Gin. I 7 in. 1 30 2,08 1.46 2.5;g 11 Inches. 5 in. 1.30 2.12 Gin. 1.44 2. 20 7 in. 1 60 2.44 12 Inches. 5 in. 1.52 2.42 2.58 1 84 2. 70 13 Inches. 5ip. 1 70 Gin 1.86 2.88 7 in. 2.02 3.00 14 Inches. Sin. 1.90 3.L2 Gin. 2.06 3.18 2,24 3.38 15 Inches. Gin. 2.28 3.48 7 in. I Sin 2.44 3.GG 2 66 3 78 16 Inches. Gin. 2.50 3 82 7in. ! Sin. 2.68 4.02 2.80 4.14 17 Inches. 7 in. Sin, 9in 2.93 4.44 3.10 4.50 3.28 4.74 12 Inches. 1.28 2 10 Oin. 2.24 1.58 2.42 13 Inches. Sin. 1.46 2.38 Gin. 1.62 2.ri4 7in. 1.78 2.72 14 Inches. Sin. 1.70 2.72 Gin. 1.86 2.88 7 in. 2.02 3. CO 15 Inches. 1 90 3.00 2,06 3 10 7 in. 2.24 3.3G 16 Inches. Gin. 2.24 3.44 2.42 3.04 Bin. 3.74 17 Inches. Gin 18 Inches. 7 in. 8 in. 9 in 3.23 4.90 3.40 5.02 3.60 5.22 19 Inches. Bin. 9in. 10 in 3.64 3 84 4.00 5.40 5.60 S.18 19 Inches. 8in 9 in. ) 10 in. 3.94 5. 80 4.16 4,32 6 08 G.26 20 Inches. Sin. 9 in. 10 in 3.96 5.88 4.16 4.34 6.08 6.28 21 Inches. Sin. I Oin. jlOin, 4.24 4.44 4.62 G.30 6.50 6.70 2. to 3.80 7in. 2.68 4.(0 2.73 4.10 18 Inches. 6 in. 4.20 7in. I Sin. 2.94 4.40 3.04 4.50 19 Inches. 7 in. 8 in. | 9in, 3.24 4.84 3.36 4.96 3.56 S.16 20 Inches. 7 in. I Sin. j 9 in. 3.50 3.62 3.82 5.26 5.38 5.58 21 Inches. 3, 94 5.86 9in. 4.14 6.06 lOin. 4.30 6.24 22 Inches. Sin. 4.24 Oin. 10 in 4.44 6.48 4.62 G.68 23 Inches. 16 Inches. 5 in. 1 90 3 00 6in. 2.06 3.16 7in. 2.22 3 34 17 Inches. 5 in. I 6 in. I 7 in. 2.08 '2.24 2.40 3.28 3.44 3 62 18 Inches. 2.48 3.78 in. I 8 in. 2.65 3.98 2.76 4.08 19 Inches. 6 in. 2.;2 4 16 7 in. 2.^.0 4.36 8 in, 3.00 4.46 20 Inches. 3,20 4.80 3.32 4.92 9 in 3.50 5.10 21 Inches. 7 in. Jab S.24 Sm. 3.60 S.3G 9 in 3.80 S.50 22 Inches. 7 in. Sin. 3.92 5.84 9 in. 4.12 6.04 Sin. 4,54 6.72 Oin. 4.75 0.94 lOin 4.94 7.14 23 Inches. Sin. 9 in. 10 in 4.22 0.20 4.44 6.48 4.60 6.66 24 Inches Sin. 4.54 6 72 9in. 4.74 0.92 10 in 4.92 7 12 25 Inches. 8 in. .20 9 in. 5 10 7,42 10 in. 5.28 7.62 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. 76 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. DESIGN No. 839. Note. Face: Plain, with Rosette, and Square Sink with Leaf. Sides : Sunk Scrolled-Panel. -This design Is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patteens extra in all cases. See Introductory Note, Page 27 Scale : M inch = 1 foot. DEPTH. IG in. 18 in. 20 in. 12 in. 24 in. 26 in. 23 in. 30 in. 32 in. 34 in. 33 in. Projection Face Width, Cut and Formed , Complete Projection Face Width . Cut and Formeu. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Foimed Complete Projection Face Width. Cut auu Formed. Complete Projection Face Width cut and Formed Complete Projection Fnce Width. cut and i ormed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. cut and Formed. Complete Projection Face Width Cut and Formed, Complete Projection Face Width, Cut and Formed. Complete Projection Face Width Ciit and Formed. Complete 6 Inches. .92 1.12 1.74 *7 Inches. 5 in. 1.12 1,84 Gin. 1 98 *8 Inches. 5 in. 1.26 2.06 (i in. 1 40 2.20 *9 Inches. 5 in. 1.46 2.34 1.60 2,48 10 Inches. 5 in. in. Tin. 1.56 1.72 2.5G 2.72 1.88 2,90 11 Inches. 5 in. 6 in. 7 in. 1.78 2 88 1.94 3.04 2.10 3.22 12 Inches. 6in. 7in. Sin. 2.12 3,a2 2,30 3. 52 2.40 3,(32 13 Inches. 6 in. I 7 in. Sin 2,34 2 52 2.62 3.(i4 3.84 3.94 8 Inches. 5in. T12 1.84 1.26 1.98 *9 Inches. 5 in. 14 Inches. Oil.. 7 in. Sin. 2.58 4. CO 2,76 4.20 2.86 4,30 15 Inches. 7in. Sill. 9in 3.04 4.00 3.16 4.72 3.36 4,92 16 Inches. 3.34 5,02 3,46 5,14 9jn. 3 66 5.34 17 Inches. 3.72 5.56 9in. 3.92 5.76 lOin. 4,10 5.96 1.26 2.06 Gin. 1 40 2.20 10 Inches. 5 in. 1.38 2,28 Gin. 1.52 2.42 11 Inches. 5 in. ] 6 in. 1.58 2.56 1,74 2.72 12 Inches. 5 in. 1 75 2.86 Gin. 1.92 3.03 7 in. 2.10 3 22 13 Inches. 5in. 6 in. I 7 in, 1,98 3.18 2.14 3.34 2.30 3 52 14 Inches. in. 7iTi. 8in. 2,36 2.52 2,64 3.66 3.84 3.96 15 Inches. in. 7in. 2.60 4,02 2.76 4.20 4.32 16 Inches. 7 in. 3.06 4.62 Sin. 3.18 4.74 9in. 3.36 4.92 17 Inches. 7 in. 3.32 5,02 m. 3.45 5.16 9in. 3.55 5.36 18 Inches. 8in. 3.78 5.62 9in. 3T98 5.82 lOin, 4,14 6.00 19 Inches. 8in. 4,04 6.04 Gin. 4.26 6.26 10 in. 4.42 6.44 10 Inches. 5 in. 6 in, | 7 in. 1.22 1 34 1,50 2 06 2.18 2.K6 11 Inches. 5 in. 1.36 2.26 6 in. 1.50 2.40 1 66 2.58 12 Inches. 5in. 1.58 2.56 6 in. 1.74 2.72 7 in. 1 90 2,90 13 Inches. 5 in. 1 76 2 86 1.92 3.02 7in. 2.08 3.20 14 Inches. 5 in. 1.96 3.16 2.12 3,32 7 in. 2,30 3.52 15 Inches. 6 in. 7 in. 2.a6 3,66 2.52 3.84 Sin. 2.64 3 96 16 Inches. in. 7 in. Sin. 2.58 4 00 4.20 2,S8 4.S2 17 Inches. 7 in. 9in. 3.06 3.18 3.36 4.62 4.74 4.92 18 Inches. 7 in. 3.34 5.04 Sin. 3.45 5.16 3.55 5.36 19 Inches. Sin. 3.74 5,58 Gin. |l0in 3 94 5,78 4,10 5.96 20 Inches. Sin. 4.06 6 06 9in. 4.25 6.26 10 in 4.44 6.46 21 Inches. Sin. 4,34 6.50 Gin. 4.54 6.70 lOin, 4.72 6.90 12 Inches. 5in 6in. I 7 in. 1,34 148 1.04 2 24 2.38 2. .56 13 Inches. 5 in. 1.52 2.52 6in. 1.68 2.68 1 84 2.86 14 Inches. 5in. I Gin. I 7 1.76 1.92 2 2.86 3.02 3.20 15 Inches. 5in. 6in. 7 in 1 96 3.14 2,12 3.30 2.30 ■3.. 50 16 Inches. 6in. 2.32 3.62 7 in. 2.50 3,82 8in. 2.50 3.92 17 Inches. 6in 2.58 3.98 2.76 4.18 in. S in. 2.85 4.28 18 Inches. 6 in. T84" 4. 38 7in. Sin. 3.02 4.58 3.12 4,68 19 Inches. 7 in. 3,30 4,98 8 in. I 9 in. 3,42 5.10 3.62 5.30 20 Inches. 7 in. 3.60 5.44 Sin. "3T72" 5.56 Gin. "3.92" 5.76 21 Inches. Sin. 4.04 6.04 9in. lOi 4.24 6,24 4.40 6.42 Inches. 8in. 9in. 4.34 6.4S 4.54 6.08 10 in 4.V2 6.88 23 Inches. 8in. 4.54 9 in. 4.86 7.14 10 in 16 Inches. 5 in. Gin. 7 in . 1 95 3 14 2.12 3,30 2,28 3 48 17 Inches. 5 in. 6 in. 7 in, 2.16 3.46 2 32 3.62 80 18 Inches. 6in. 7in. 2 55 3.96 2.74 4.16 8 in. 2.84 4.26 19 Inches. 6in. 2 80 4 34 7 in. Sin. 3.08 4,64 20 Inches. 7in. 3 26 4.94 Sin. 3.38 5,06 Gin. 3 56 5.24 21 Inches. in. I Sin. I Gin 3,58 5.42 3 7J 5.L4 22 Inches. 7in. I Sin. Ig 3.90 4.02 4.22 5.90 6.02 6.22 5.04 7.34 23 Inches. Sin. 4.32 6,46 in. lOin. 4 54 6,68 4,70 6 86 24 Inches. Sin. 4.64 6 92 9in. I lOin 4.84 7 12 5.02 7 32 25 Inches. 5.00 7.42 9 in. S 22 7,64 5.40 7.84 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. THE KITTREDGE COllisICE AND ORi^'AMENT COMPANY. DESIGN No. 840. Face: Plain, with Rosette,* and Square Sink with Leaf. Sides: Sunk Scrollecl-Panel, with Stamped Ornament. Note.— This design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. ch= 1 foot. DEPTH. 13 in. 1 "8 Inches. 1 10 Inches. 12 Inches. i Face Width 1 1 5 in. G in. i 5in. Gin. 5in. 6in. | 7 in. 5in G in. 1 7 in. Cut and Formed Complete 1.12 1.7G 1.25 1.90 1.30 2.0G 1.44 2.20 1.54 2 44 1 66 2.56 1.82 2.74 1 68 2 64 1 82 2.78 1.98 2.96 18 ia. *7 Inches. 1 *9 Inches. 11 Inches. 13 Inches. 1 15 Inches. 5 in. Gin. 5in. Gin. 5 in. TTto" 2.6G 6in. 1 7 in. t 5in. Gin. 7 in. i Cut and ±ormea. .. Complete | 1.30 2.06 1.44 2.20 1.48 2.32 1.52 2.46 1.84 2.80 2.00 2.98 1.88 2.90 2.04 3.12 2 'e regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patteens extra in all cases. See Introductory oSTote, page 27. Scale : H li ich 1 ! 11 1 'yiRiwiH'i^si t. DEPTH. 13 in. * 7 Inches. * 9 Inches. 11 Inches. 13 Inches. 15 Inches, Face Wiath 4 in. 5 in. 6 in. 4in. Sin. 6 in. 5 in . Gin Tin. 5 in . Gin. Tin. 5 in. 6 in. 7in. (Jut and Foniica. . Complete .86 1.5S .88 1.60 .92 1.64 1.00 1.78 1.02 1.80 1.06 1.84 1 16 2.04 1.20 2.08 1 24 2.12 1.30 2.30 1.34 2 34 1.38 2.38 1.52 2.60 1.58 2.66 1.62 2.70 20 ia. * 8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches. Face Width 4 in. 5 in . 6in. 4in . 5 in . Gin. 5 in . Gin. 7 in. 5 in. Gin. T in. 5 in . Bin. T in . cut and Formed . . Complete 1.00 1.78 1.02 1.80 1.06 1.84 1.14 2.02 1.18 2.C6 1.22 2.10 1.38 2 34 1.42 2.38 1 45 2.42 1 54 2^62 1.58 2.66 1.62 2.70 1.74 2.90 1.78 2 ,'.^4 1.82 2.98 22 in. *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face Width 4 in . 5 in . Bin. 4 in . Sin. Gin. 5 in. Gin. 7in. 5 in . 6 in. 7 in. 5 in. 6 in. Tin. (Juc and f oriueu . . Complete 1.20 2.(J6 1.22 2.08 1.26 2.12 1.34 2.30 1 38 2.34 1.42 2,38 1.54 2.62 1.58 2.66 1.62 2.70 1.74 2.90 1.78 2.94 1.84 3.00 1.92 3.22 1.93 3.C6 2. CO 3.30 24 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5in. 1 6in. 7in. 5 in. 6in. T iti 5 in. Gin. 7 in. 6 in. 7 in. Sin. 6in. 7in. Sin. cut and Formed. . Complete 1.36 2.36 1.40 2.40 1.44 2.44 1.56 2.64 1.60 2.68 1.66 2.74 1.74 2.94 1.78 2.98 1.84 3 04 1.96 3 26 2.02 3 32 2.06 3.36 2 18 3 56 2.24 3.62 2.28 3.66 26 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. 6in. Tin. 5 in . 6in. 7 in. Gin. Tin. Sin. Gin. 7in. Sin. 6in. 7 in. 8 in. cut and Formed. . Complete 1.58 2.66 1.62 2 70 1 66 2.74 1.76 2.96 1.80 3.U0 1.84 3.04 2. 02 3.32 S.C6 3.36 2.12 3.42 2.20 3.58 2.26 3.64 2.30 3.68 2.38 3.92 2 44 3.98 2.48 4 02 23 in. 12 Inches. 1-4 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width 6 in. 7in. Bin. 6 in. 7 in. Sin. 6 in. Tin. Sin. Bin. 7 in. Sin. 7 in. 8 in. 9in. cut and Formed. . 1.78 2.98 1.84 3.04 1.88 3.08 2.02 3.32 2.06 3.36 2 12 3.42 2.20 3.62 2.26 3.68 2.32 3.74 2.42 3.96 2.48 4.02 2.52 4.06 2Jo 4.36 4.42 2. SO 4.46 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6in. Tin. 8 in. 6in. Tin. Sin. Tin. Sin. 9 in. Tin. Sin. 9in. Tin. Sin. 9 in. cut and Formed. . Complete 2.00 3.30 2.06 3.36 2.10 3.40 2.22 3.64 2 26 3.68 2 32 3.74 2.54 4.08 2.60 4.14 2.64 4.18 2.74 4.40 2.80 4.46 2.86 4.52 2.98 4.82 3.04 4.88 3.10 4.94 32 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width Gin. 7 in. Sin. 7in. 8 in. 9 in. Tin. Sin. 9in. Tin. Sin. 9in. Tin. Sin. 9 in. cut and Formed. . 2 20 3.62 2.26 3.68 2.30 3.72 2 54 4.08 2.60 4.14 2.64 1 4.18 2.78 4.48 2.84 4.54 2.90 4.60 3.00 4.84 3.06 4.90 3.12 4.96 3.28 5.26 3 34 5 32 3.40 5.38 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width Tin. Sin. 9 in. Tin. 8in. 9 in. Sin. 9in. 10 in. Sin. 9in. lOin. Sin. 9in. 10 in. Cut and I'ormed. . Complete 2.52 4.06 2 58 4.12 2.64 4.18 2.76 4.46 2.84 4.54 2.90 4.60 3.10 4.94 3.16 5.00 3.22 5.06 3 36 5.34 3.42 5.40 3 48 5.46 3.62 5.74 3.70 5.82 3.76 5.88 35 in. 16 Inches. IS Inches. 20 Inches, 22 Inches. 24 Inches. Face Width 7 in. 8in. 9in. 8 in. 9 in. 10 in. Sin. 9 in. lOin. Sin. 9 in. lOin. Sin. 9in. lOin. Cut and Formed. . Complete 2 £0 4.46 2.86 4.52 2.92 4 58 3.14 4.98 3.20 5.04 3.26 5.10 3.40 5.3S 3,46 5.44 3.54 5.52 3.64 5.T6 3.70 5.82 3.78 5.90 3.88 6. 16 3.94 6.22 4.02 6.30 38 in. 17 Inches. 19 Inches. 21 Inches. 23 Inches. 25 Inches. Face Width 8 in. 9 in. 10 in. 8in. 9 in. 10 in. Sin. 9in. lOin. 8in. 9in. lOin. Sin. 9in. lOin Cut and Formed. . Complete 3.08 4.92 3.14 4.98 3.22 5.06 3.38 5.36 3.46 5.44 3.52 5.50 3.64 5.80 3.70 5.86 3.78 5.94 3.88 6.16 3.96 6.24 4.04 6.32 4.20 6.62 4.28 6.70 4.36 6.78 40 in. 18 Inches. 20 Inches. 22 Inches. 24 Inches. 26 Inches. P-^ce Width. ... 8in. 9 in. 10 in. 8in. 9 in. 10 in. 9 in. 10 in 11 in 9 in. 10 in 11 in 9 in. 10 in llin Cut and i?'ormea. . 3.38 5.36 3.44 5.42 3.52 5 50 3.64 5.80 3.70 5.86 3 78 5.94 4.00 6.28 4.08 6.36 4.16 6.44 4.28 • 6.70 4 36 6.78 4.44 6.86 4.58 7.18 4.65 7.26 4.74 7.34 * Sizes marked with a star are priced as Corbels, that is without Top-Moulding. THE KITTREDGE CORiTICE AJ^D ORIS'AME^fT COMPANY 83 DESIGN No. 846. Face: Plain, and two Square Sinks. Sides: Sunk Scrolled-Panel, with Stamped Ornament. Note.— This design Is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. ScALB : 1^ inch = 1 foot. 18 in. 20 in. 22 in. 24 in. 28 in. 'in. 32 in. 34 in. 36 in. 38 in. 40 in. Projection Face Width Cut and Formed Complete Projection Face Wifith. *Jut and ±oimca. Complete Projection Face Width. Cut and Formed. Complete Projection Face W idth . Cut and i'oimed Complete Projection Face AVidth. \..ut ana Formed. Complete Projection Face Width <^ut and J^'ormed Complete Projection Face Width. <^ut and a ormed . Complete Projection Face Width. Cut and iWmed. Complete Projection Face Width . Cut and Formed. Complete Projection Face Width Cut and Formed , Complete Projection Face Width. Cut and li'ormed. Complete . . Projection Face Width. Cut and Formed . Complete * 7 Inches. 4 in. .'Sin. G in. 104 l.i6 1.10 l.bU 1.82 1.86 *8 Inches, 4 in. 5 in. I 6 in. 1.22 1.24 1.28 2.04 2.06 2.10 *9 Inches. 4 in. 1.46 2.36 ^n. I 0 in. 1.48 1.52 2.42 10 Inches. 5 in. 6 in. | 7 in. 1.72 1.76 1.80 2.80 2.84 2.88 11 Inches. 5 in. Gin. 7iu. 1.98 2 02 2.06 3.16 3.2U 3.24 12 Inches. 6 in. 2.24 3.54 Tin. .30 2.34 3.60 3.64 13 Inches. n. Tin. Sin 2.52 3.94 2.58 2.62 4.00 4 04 14 Inches. 4.34 7i n. 8in. 4.40 4.44 15 Inches. Tin, 3.20 4.88 8in. 9in. 3.26 3.32 4.04 5.00 16 Inches. Tin. 8 in. | Oin 3.56 5 36 3.62 3.68 5.42 5. 48 17 Inches. 8 in. 3.94 5.94 Gin. lOin. 4.00 4.08 6.00 6.08 18 Inches. in. flin. 10 in 4.34 6.48 4.40 6.54 4.43 6.62 *9 Inches. 4 ii). 5 in. 6 in. 1.22 1.24 1.28 2 04 2.06 2 10 10 Inches. '4in. fsin. 6in 1.48 1.52 156 2.42 2.40 2.50 11 Inches. 4in. 5in. 6in 1.70 174 1.78 2.T4 2.T8 2.82 13 Inches. 5in. 6in. Tin, 1.96 3.14 2.00 3.18 2.06 3.24 13 Inches. 5in. 6 in. T in. 2.22 2.26 3 52 3.56 2.30 3 60 14 Inches. 6in. 2.54 3.96 2.58 4.00 2.64 4.06 15 Inches. Oin. Tin. Sin. 4.36 2.86 4.40 2.92 4.46 16 Inches. Tin. 3.22 4 9J in. Oin. 3.28 4.96 3.32 5.00 17 Inches. Tin. Sin. 9in. 3.52 5.36 3.60 5.44 3.66 5.50 18 Inches. 81n. 9in. lOin 4.00 6.00 4.06 G CO 4 12 0.12 19 Inches. Sin 9 in. lOin 4.34 6.48 4.42 0 56 4.48 G.62 20 Inches. in 9in. lOii 4. TO T.04 4.76 T.IO 4.84 T.18 11 Inches. 5in. 6in. T in. 1.50 1.54 1.58 2.44 2.48 2.52 12 Inches. 5in. I 6 in. T in 1.74 1.78 1. 2.TS 2.82 2. 13 Inches. 5in 6in. Tin 194 1.98 2.02 3.12 3.16 3.20 14 Inches. 5 in. in. Tin. 2.20 2 24 2.30 3.50 3 54 3.6« 15 Inches. in. Tin. 2.54 2.58 2.64 3.96 4 00 4.06 16 Inches. 6 in. Tin. Sin 2.80 2.86 2.92 4.34 4.40 4.46 17 Inches. 322 3.28 332 4.90 4.96 5.00 18 Inches. Tin. Sin, 9 in ZM 3.60 3.65 5.38 5.44 5.50 19 Inches. Sin. I 9 in. 10 in 3.96 4.02 4.08 5.96 0.02 I 0.08 20 Inches. in. 9in. lOin 4.36 4.42 4.50 0.50 0.56 6 64 21 Inches. Sin. 9in. lOin. 4.70 4.76 4.84 T.04 T.IO T.18 22 Inches. 9 in. 1 10 in. 11 in 5.18 5.25 T.64 T.T2 5.34 T.80 13 Inches. 5in. G in. | T in. 166 170 1.74 2.T4 2. 78 2.82 14 Inches. 5in. Oin. Tin. 1.94 1.98 3 12 3.16 2.02 3.20 15 Inches. 5in. Oin. I T in. 2.20 2 24 2.30 3 40 3.50 16 Inches. 6in. Tin. 8in. 2.48 2.54 2.58 3 90 3 96 4 00 17 Inches. in. Tin. 2.80 4.30 2.90 4.40 18 Inches. 6 in. Tin. 3.16 3.20 4.84 4.88 19 Inches. 3.50 5.30 Sin. I 9 in. 3.56 3.62 5 36 5.42 20 Inches. 3 86 5.86 Sin. 3. 92 5.92 3.98 5.98 21 Inches. 8 in. 4.32 6.46 9 in. 10 in .52 4.44 6.68 22 Inches. 8 in. 4.70 TOO Oin. lOin 4.V6 T.06 4.84 T 14 23 Inches. 8 in. 5.06 T.52 9 in. lOin. 5.14 TOO 5.22 T.68 24 Inches. Oin, 5.50 8.22 10 in. 11 in 5.68 8.30 5.76 8.38 15 Inches. 5in. 1.92 3.10 Oin. .10 T in. 2.02 3.20 16 Inches. 5in. 2.20 3.40 Oin. 2.24 Tin, 2.28 .50 3.54 17 Inches. 5 in. 6 in. Tin 2.44 2.48 3.90 18 Inches. Gin. Tin 2.78 2.84 2 88 4.28 4.34 4.38 19 Inches. Oin. Tin. 8in 3.06 3.12 3 16 4.T4 4.80 4.84 20 Inches. Tin. Sin. Oin 3.46 6.20 3.52 3.56 5 32 5.30 21 Inches. 3.84 5.84 Sin. 3.90 5.90 9 in. 3. 96 5.96 22 Inches. Tin. Sin. 9 in 4.24 4.30 6.44 4.36 6.50 23 Inches. Sin. Oin. 10 in 4.58 6.98 4.76 4 TOO T.12 24 Inches. Sin. 5.06 T.52 in. lOin- 5.12 T.58 5.20 T.66 25 Inches. Sin. Oin. lOin 5.52 560 8.14 8.22 26 Inches. 9in. loin, llin 5.06 8.86 6.14 8.94 6.22 9 02 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. 84 THE KITTREDGE CORNICE ORi^-AMEKT COMPAi^Y. DESIGN No. 847. 'rmhijijl Face: Plain, and two Square Sinks. Sides: Incised. V rhis Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. Scale : H Inch = = 1 foot. DEPTH. * 7 Inches. * 9 Inches. 11 Inches. 13 Inches. 15 Inches, Face Width 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. Sin. 6 in 7 in. 5 in . 6in. 7 in. 5 in. 6 in. 7 in. io lu. (Jut and Formed. . .98 1.00 1 04 1.16 1.18 1.22 1 1 48 1.52 1.56 1.66 1.70 1.74 1.92 1.98 2.02 Complete 1 76 1.78 1 82 2.00 2.02 2.06 2.72 2.76 2.80 3.06 3 10 3.14 3.46 3.52 3.56 *8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 20 in. Face Width 4in. 5 in. 6 in. 4 in . 5 in. Bin. 5 in . 6 in. 7 in. 5 in. Oin. 7 in. 5 in. 6 in. 7in. Cut and Formed . . 1.16 1.18 1.22 1.46 1.50 1.54 1.74 1 78 1 82 1.94 1.98 2 02 2.18 2.22 2.26 Complete 2.00 2.02 2.06 2.70 2.74 2.78 3 10 3.14 3.18 3.48 3.52 3.56 3.84 3,88 3.92 *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches.. 22 in. Face Width 4 in. 5in. 1 6 in. 4in. Sin. Bin. 5 in. Bin. 7in. 5 in . Bin. 7in. 5 in. 6 in. 7 in. (Jut and Formed.. 1.24 1.36 1.40 1.70 1.74 1.78 1.94 1.98 2.02 2.18 2.22 2.28 2.40 2.44 2.^8 2.26 2.28 2.32 3.06 3.10 3.14 3.48 3.52 3.56 3.84 3.88 3.94 4.24 4.28 4.32 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 24 in. Face Width Sin. 6in. 7 in. 5 in. 6 in. 7 in 5 in. Bin. 7 in. 6in. 7 in. Sin. Bin. 7 in. Sin. (^ut and Formed. . 1.72 1.76 1.80 1.96 2.00 2.06 2.22 2.28 2.44 2.50 2 54 2.6 8 2.74 2.78 Complete 3.12 3.16 3.20 3.60 3.54 3.60 3.88 3.92 3.98 4 28 4.34 4.38 4.64 4.70 4.74 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 26 in. Face Width 5in. 6in. 7 in. 5in. 6in. 7in. 6 in. 7 in . Sin. Bin. 7in. Sin. 6in. 7 in. Sin. Cut and Formed. . 1.98 2.02 2.06 2.20 2.24 2.28 2.50 2.54 2.60 2.70 2.76 2.80 2.90 2.95 3.00 Complete 3.52 3.56 3.60 3.90 3.94 3.98 4.34 4.38 4.44 4.66 4.72 4.76 5 06 5.12 5 16 13 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 28 In. Face Width 6in. 7 in. Sin. 6 in. 7 in. Sin. 6 in. 7in. Sin. Bin. 7 in. Sin. 7 in. 8 in. 9in. Cut and i:oTK.— This design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same gc;neral features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. Scaltc: inch= 1 foot. DEPTH. U in. IC in. IS in. 23 in. 22 in. 21 in. 23 in. 30 in. Projection Face WirUh. (Jut and Formed Complete Projection Face Width, Cut and Jbormcu. Complete Projection Face Width Cut and Formca. Complete Projection Face Width. Cut and Formed Complete Projection Face Width Cut and Formed. Complete Projection Face Width. i^utand Forniea Complete Projection Fnce Width, Cut and J< ormea. Complete Projection Face Width. cue atid i^urmeu. Complete Projection Face Width . cut and Formed. Complete 5 Inches. 3in. .72 1.38 .74 1.40 5 in. 1.42 *6 Inches. 4 in. .92 1.C8 5 in. .94 1.70 6 in, 1 74 *7 Inches. 4 in. 5 in. 1.06 1,08 l.iJ4 *8 Inches. 4 in. 1.22 2.18 5 in. I 6 in. 1.24 2. 20 1.28 2.24 *9 Inches. 4 in. Sin. 1.40 1 42 2.48 1.46 2 51 10 Inches. 5 in. 1.82 3.40 1.86 3,44 7 in. 1 90 3.48 11 Inches. 5in. 6in 2.05 3.78 2.10 3,82 2.14 3 8H 12 Inches. 6in. 7in. Sin. 2,34 4.22 2.40 4.2S 2. 44 4.32 13 Inches. 2.58 4 Gi 7in. 2M 4.(jS Sin. 2.68 4.72 Inches. .8a I.e. 2 4 in. .90 1.64 ,92 l.t6 *8 Inches. 4in. 5in. 1 04 1.90 1.06 1,92 6in. 1 10 1 .90 *9 Inches. 4 in. 5 in. 1.22 2.18 1,24 2.20 6in. 1.28 2.24 10 Inches. 4 in. 1.58 2.98 5 in. 1.62 3.02 6 in. 1.66 3.06 11 Inches. 1.78 3.32 5 in. 6 in. 1.82 3.36 1.86 3 40 12 Inches. 5in. 2.04 3.76 2.08 3.86 7 in 2,14 3.86 13 Inches. 6 in. 2 30 4 16 6in. I 7i 2 34 4.20 2,38 4.24 14 Inches. 6in. 7in. Sin. 2.60 4.61 2,64 4.68 2.70 4.74 15 Inches. 6in. 2.84 6.02 7 in. 2.88 5.06 2.94 5.12 ^9 Inches. 1.02 1 86 5 in. I 6 in. 1.06 1.90 1.08 1.92 10 Inches. 5 in. 1.40 2.66 1.42 2.68 1 46 2.72 11 Inches. 1 58 2.96 6in. i.e2 3.00 7 in. 1.66 3(4 12 Inches. Sin. 1.B2 3.36 in 7in. 1.86 3.40 1.90 3.44 13 Inches. Sin. 2.04 3.76 2.C8 7in. 2 12 3 84 14 Inches. 2.28 4.14 4.18 7 in. 2.38 4.24 15 Inches. 6in. 7 in. Sin. 2.58 4.60 2.62 4 64 2.68 4.70 16 Inches. 6in. 2.82 5.' 0 7 in. 2.88 5,06 8in. 2 94 5.12 17 Inches. 7 in. 3.16 5.52 Sin. 3,22 5,58 9 in. 3.26 5.62 11 Inches. 5i ' 1.33 2.64 G in. 1 42 2.68 1.46 2.72 12 Inches. Sin. 1.56 2,94 l.CO 2.98 1.C4 3.02 13 Inches. 5 in. bin. 1.78 3.30 1.E2 3.34 1.86 3 38 14 Inches. Sin. 2.04 3.74 6in. 2 08 3.78 2.12 3 82 15 Inches. 5in. 2.26 4.10 6in. 4.14 7 in. 2.36 4.20 16 Inches. 6in 2.56 4.58 7in. 2.62 4 64 Sin. 2.66 4.tS 17 Inches. 2,80 4.96 7 in. 5.02 Sin. 2.90 5.16 18 Inches. 6 in. I 7 in. I Sin, 3.08 5.44 3.14 5.10 3.18 5.54 19 Inches. 3.40 5.94 Sin. 3.46 6.00 3.52 6.06 17 Inches. 5 in. 2 50 4.50 6in. 2.54 4.54 7' in. 2.53 4.58 18 Inches. 7 in. Sin. 19 Inches. 6 in. 3.02 5.36 7 in. 3.08 5.42 Sin. 3.12 5.46 20 Inches. 3.36 5.90 Sin. 3.42 5.96 3.46 6.00 21 Inches. 7in. 3.68 6 42 Sin. 3.74 6.48 9 in. 3.80 6.54 32 in. 34 in. 36 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face "Width Gin. Cut and Formed. Complete 2.84 O.02 7 in. 2.90 5.10 Sir. 7 in 2.94 5.14 3.22 5.60 9iu. 7 in. 5. 64 3 46 6,(2 Sin. 3.52 6.08 9in, 7 in. 3.58 6 14 3.72 6.48 Sin. 3.73 6,54 9 in. 3.84 6 CO Projection 15 Inches. Face Width . 7 in. Cut and Formed. Complete 3.14 5.52 Sin. 3.20 5.1S 9 in. 3 26 5.64 Projection 16 Inches. Face Widtli 7 in. Cut and Formed. Complete 3.45 6.04 Sin. 3.58 6.16 17 Inches. 7 in 3.44 6 00 Sin, 3.52 6.08 9 in. 3.53 6.14 18 Inches, Sin. 3.84 6.62 9 in. 3.90 6,68 10 in. 3.96 6.74 19 Inches. 21 Inches. 3.78 6.^4 9in. 3.84 6. GO 10 in 8in, 3. 90 6 66 4.10 7.06 9 in. 4 10 7.12 20 Inches. 22 Inches. 22 Inches. 7 in. I 8 ill. | 9in 4,02 6,98 4. 08 7,04 4.14 7.10 23 Inches. 4.40 7.56 9 in. 4.48 7.64 lOin 4.54 7.70 24 Inches. Sin. 4.12 7.10 9in. 10 4.18 7.16 Sin. 4.25 7.24 4.44 7.62 9 in. 4.50 7. 68 4.58 7.76 4 74 8.10 9in. 4.80 8.16 10 in 4.88 8.24 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. THE KITTEEDGE CORKICE AKD OR^AMEiq^T COMPAKY. 91 DESIGN No. 854. Face: Sunk, with Leaf. Sides: Plain, Note.— This design is to be regarded as a type of a class. The following figures are applioablc to all Brackets possessing the same general features of ornamentation. Pattekns extra in all cases. See Introductory Note, Page 27 Scale: 14 inch=lfoot. DEPTH. 15 ■■•-6 Inches, "S Inches. 10 Inches. 12 Inches. Face Width 5 in. 0 in. 5 in. 6 in. 5 in. 6in. 1 Tin. Sin j Gin. 1 7in. (Jut and Formed. . Complete .80 3.20 .88 1.28 .92 1.36 1.00 1 .44 1 04 1 62 1 10 1.68 1.20 1.78 1 15 1 78 1 24 1 1.86 1 134 1.96 IS in. '"7 Inches. *9 Inches. 11 Inches. 13 Inches. 15 Inches. Face Width 5 in. 6 in. ^ in. 6 in. 5 in. 1 6 in. 7 in. Sin. 6in. 7in. 5 in. 6 in. T in. Cut and i oruiou — .94 1.38 1.02 1 46 1 08 I.IS 1.15 1.66 1.18 l.SO 1.26 1.88 1 36 1.98 1.34 2 02 1.44 2.12 1 54 2.22 1.52 2. '.8 1.64 2.40 1.74 2.50 2: in. *8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches. Face Width 5 in. 6 i". 5 in. 6in. 5 in. 1.38 2.08 6 in. 7 in. Sin. 6in. 7 in. Sin. 6 in. Tin. Cut and I'ormed Complete 1.08 1 53 1.16 1,66 1.22 l.fc6 1.30 1.91 1 48 2.18 1 58 2.28 1 56 2.. 34 1.66 2.44 1 76 2.54 1.74 2 fS 184 2.68 1.94 2,78 £2 in. *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face Width 5 in. 6in. 5 in. 6in, 5 in. 6 in. 7in. Sin. 6 in. 7 in. 5 in. 6 in. 7in. Cut and Formtd — Complete 1.26 1.80 1 34 1.88 1.38 2. US 1.48 2.18 1 56 2.34 1.66 2.44 1.75 2.f4 1.74 2.58 1.84 2 68 1.96 2.80 1.94 2 84 2.04 2.94 2.14 3 04 24 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. Bin. 7 in. 5in. 6 in. 7 in. 5 in. 6in. Tin. 6in. 7 in. Sin. 6 in. 7in. Sin. Cut and Formed Complete 1.38 2.10 1.48 2.20 1.58 2.30 1 56 2 .36 1.66 2.46 1.V8 2.58 1 76 2.62 1.86 2.72 1.98 2.84 2.06 2.98 2.18 3.10 2.22 3.14 2 28 3 28 2.40 3.40 2.44 3 44 26 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. 6in.| 7in. Sin. 6in. 7 in. 6 in. 7 in. Sin. 6 in 7in. Sin. 6 in. 7 in. Sin.. out and Formed Complete 1.58 2.38 1.68 2.48 1.78 2.58 1.78 2.64 1.88 2.74 1.98 2.84 2,08 3 00 2.18 3.10 2 24 3.16 2.30 3.30 2.42 3.42 2.46 3.46 2.52 3 60 2.64 3.72 2.68 3.76 23 in. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width 6ir». 7 in. Sin. 6 in. 7ip. Sin. 6in. 7 in. Sin. 6 in. "2^58' 3 68 Tin. Sin. 7 in. Sin. 9in. v..ut and Formed Complete 1.88 2.76 2.00 2.88 2.04 2.92 2.10 3.04 2.20 3.14 2.26 3.20 2.32 3.34 2 44 3.46 2 50 3.52 2.70 3.!^0 2.74 3.84 2.90 4.10 2.95 4.16 3.06 4.26 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6in 7in. Sin. 6 in. 7in. Sin. Tin. Sin, 9 in. 7 in. Sin. 9in, 7 in. Sin. 9in Cut and Formed Complete 2.08 3 02 2.20 3.14 2.24 3.18 2.34 3.36 2.44 3.46 2.50 3.52 2.72 3.82 2.78 3.88 2.88 3.98 2.94 4.14 3.00 4.20 3. 12 4.32 3.20 4.50 3 26 4.56 3.38 4.68 32 in. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width 6i.,. i Tin. Sin. 7in. Sin. 9in. 7 in. Sin. 9 in. 7 in. Sin. 9 in. 7 in. Sin. 9 in. cut and Formed 2.34 3.38 2.46 3.50 2.50 3.54 2.72 3.84 2.78 3.90 2.88 4.00 3.00 4.22 3.06 4.28 3.18 4.40 3.24 4.56 3.30 4.62 3.42 4.74 3.52 4.96 3 58 5.02 3.70 5.14 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face "Width 7 in. Sin. 9in. 7in. Sin. 9 in. Sin. 9in. 10 in . 8in. 9in. lOin. Sin. 9in. jlOin. {Jut and iormed 2.70 3.82 2.76 3.88 2 88 4.10 2 98 4.20 3.06 4.28 3.18 4.40 3 30 4.62 3 42 4.74 3.48 4 80 3.60 5.04 3.72 5.16 3.78 5.22 3.86 5.40 4.00 5.54 4.05 5.60 35 in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width 7in. Sin. 1 9in. Sin. 9in. lOin. ~3^ 4.88 Sin. 9in. 10 in 8ir. 9in. lOin. Sin. 9in. 10 in Cut and Formed Complete 3.00 4.24 3.05 4. 30 3.18 4.42 3 36 4.70 3.48 4.82 3.62 5.08 3.74 5.20 3.82 5.28 3.90 5 46 4.02 5.58 4.10 5.66 4.18 5 82 4.30 5 94 4.38 6 02 33 in. 17 Inches. 19 Inches. 21 Inches, 23 Inches. 25 Inches, Face Width Sin. 9in. lOin. 8in 9in. lOin. Sin. 9in. lOin. Sin. 9 in. 10 in Sin. 9in. lOin. CiTt and Formed 3.30 4.64 3.42 4.76 3.50 4 84 3.60 5.06 3.74 5 20 3.80 5.26 3.90 5.46 4.02 5.5S 4.10 5.66 4.18 5 82 4.32 5.96 4.40 6.04 4.50 6.^4 4 64 6.38 4.72 6.46 * Sizes marked with star are priced as Corbels; that is, without Top-Moulding. 92 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. DESIGN No. 855. Face: Sunt, with Leaf. Sides: Plain, with Stamped Ornament. Note —This design is to be rcjjarded as a type of a class. The following figures are applicable to Brackets possessing tlie same general features of ornamentation. Tatterxs extra in all cases. See Introductory Note, Page 27 Scale: 34 inch = 1 foot. DEPTH. IS in. 18 in. Projection Face Wiilth. (Jul and Formed Complete Projection Face Wiilth. Cut and f ormea. Complete 20 in. 22 in. 24 in. Projection Face Width. Cut and F'urmetl Complete Projection Face Width. Cut antl Ij'ormed Complete Projection Face Width. cut and Formed. Complete Projection 26 in. 23 in. ;0 in. 32 in. 34 in. 36 in. Face Width. (^utand Formed Complete Projection Face Width. v.ut and i^'ormed. Complete Projection Face Width Cut and J^ormed. Complete Projection Face Width . cut and Formed. Complete Projection Face Width . KAit arid Formed Complete . . Projection Face Width 33 in. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete , . . 0 Inches. 1 08 1 IS 1 ()0 Inches. ?> in. 1.26 1 7-1 Gin. 8 Inches. I 5in. 1.72 Gin. 1.32 1.80 Inches. 8 Inches. 1.44 2 00 Gin. 1.52 2.08 '"^9 Inches. 5 in. 1 66 2.2G 1.74 2 34 10 Inches. 5 in. I Gin. 2.76 1.85 2.6G 11 Inches. 5 in. 2.12 3.00 Gin. 2 22 3.10 7 in. 2.32 3.20 12 Inches. Gin. 2.48 3 4G 7in. 2.60 3.58 Sin. 2.54 3 G2 13 Inches. Gin. 2.78 3 82 7in. Sin. 2.94 3.98 14 Inches. 1.44 2.00 Gin. 2.08 10 Inches. .5 in. 1.66 2.36 Gin. 1.74 2.44 10 Inches. 1 44 2 08 Gm. 1.50 2.14 1.60 2 .24 12 Inches. 11 Inches. 5in. I Gin. 1.62 1.70 2.30 2. 38 1 80 2.4S 12 Inches. 1.86 2.G4 11 Inches. 5 m. 1.85 2.G4 Gin, 1.96 2.74 12 Inches. 5 in. Gin. 7 in. 2.10 2.20 2.32 2 9S 3.08 3.20 13 Inches. 5in 2.38 3.34 Gin. 2.48 3 44 7 in, 2.58 3.54 14 Inches. Gin. 2 80 3 84 2.90 3.94 Sin. 2.95 4 00 15 Inches. G in. 3.14 4.28 7 in. 3.24 Sin. 3.30 4.44 G it.. "3U 4.30 7 in. 3.25 4.42 Sin. 3.30 4.4G 15 Inches. 3.52 4.88 Sin. 3.58 4.94 9in. 3.80 5.00 16 Inches. 4.05 5.44 Sin. 4.12 5.50 9 in. 4.24 5.62 17 Inches. 4.52 6.02 9in. 4.64 6,14 10 in. 4.72 6,22 16 Inches. 3.64 4.90 17 Inches. 7in. 4.04 5.40 Sin, 4.12 6.48 9 in. 4.24 5.60 18 Inches. Sin 9in. 4.70 6.20 lOin 4.76 6.26 19 Inches. Sin 5.00 6.6-i 9 in. 5.14 6 76 10 in 5.20 6.82 6in. I 7 in. 1 96 2.74 2.C6 2.84 13 Inches. Sin. 2.10 2 96 Gin 2.20 3.06 2.30 3.16 14 Inches. in. 6in. 7in. 2 36 3 32 3.42 2.46 2.58 15 Inches. 6in. 2.78 3.80 7 in. 2.88 3.90 Sin, 2.94 3.96 1 60 2 28 G in. i 7 in. 2.y6 1 78 2.46 13 Inches. Sin. 1.82 2.58 6in. 1.92 2.68 7in. 2.02 2.78 14 Inches. 5in. 2. 10 2 9() 2.20 3.06 2.30 3.16 15 Inches. 15 Inches. Sin. Sin. 2 34 3.28 6in. 2.44 2.56 3.50 16 Inches. 6 in. 2.75 3.78 7 in. 2.88 3.90 Sin. 2.92 3.94 17 Inches. 6 in. 16 Inches. 6in. 3 12 4.26 7 in. Sin. 24 3.30 4 44 17 Inches. 7 in. 3.70 4.94 9 in. 3.80 5.04 18 Inches. 7 in. .42 4.12 5.48 9 in. 4.24 5.60 19 Inches. Sin. I 9in 4752 6.00 4.64 6.12 10 in 4 70 6 18 20 Inches. Sin. 5.02 6.64 9 in. 5.14 6.76 10 in 5.22 6 84 51 Inches. Sin. 5.50 7.24 9in. lOin 5.62 7.36 5.70 7.44 3 10 4.22 7 in. 3 22 4.34 Sin. 3.25 4.38 18 Inches. 2 05 2.90 Gin. 2.18 3.02 7 in. 2.23 3.12 16 Inches. 5 in. 2.34 3.28 in. 2.44 3.38 7 in. 2.54 3.48 17 Inches. 3.50 4.74 7 in. Sin. 3.62 4. 86 19 Inches. 7 in. I 8 in. | 9 in. 4.00 5.34 4.06 S.40 4.18 5.52 20 Inches. 4.45 5.94 4.52 6.00 9 in. 4.64 6.12 21 Inches. 8 in. 5.00 6.60 9 in. 5.12 6.72 lOin. 5.18 6.78 22 Inches. Sin. 9 in. 5.50 5.62 7.21 7.-36 lOiu 5.70 7.44 23 Inches. Sin. 5.00 7.82 9 in. 6.14 7.96 lOin 6.22 8 04 6 m. 2.54 3.64 2 74 3.74 7 in. 2 84 3 84 18 Inches. 6 in. I 7in. 3.08 4.20 3.20 4 32 Sin. 3.24 4.36 19 Inches. 6 in. 3.44 4 66 7 in. 3.56 4.78 3.50 4.82 20 Inches. 7 in. 3 95 5.30 Sin. 4.02 5.36 9 in. 4.12 5.46 21 Inches. 4.42 6.88 Bin. 4.48 5.94 9in 4.60 6.06 22 Inches. 7 in. 4.92 6.52 Sin. 4 98 6.58 5.10 6.70 23 Inches. Sin. 5.46 7.18 in. 5.60 7.32 10 in. 5.66 7.38 24 Inches. Sin. j 9 in. 6 00 7 82 6,12 7.94 lOin, 6.20 8 02 25 Inches. Sin. 6.56 8.50 9 in. 6.78 8.72 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. THE KITTREDGE CORNICE Aiq"D ORJS'AMENT COMPAKY. 93 DESIGN No. 856. Face: Sunk, with Leaf. Sides: Sunk Panel. Note.— This design is to be regarded as a type of a class. The following iigures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. Scale: '>■< incb= 1 foot. DEPTn. 16 in. ■^6 Inches. "8 Inches. 10 Inches. 12 Inch ES. I! Face Width 5 in. 6 in. Sin. Bin. 5 in. 6 in. 7 in. 5 in Oin. 7in.ji Cut and Formed Complete .94 1.66 1.C2 1.74 1.08 1.92 1.16 2.00 1 18 2 10 1 24 2.16 1.34 2.26 1.30 2 28 1 38 2.36 1.48 2.46 18 in. ■■^"7 Inches. *9 Inches. 11 Inches. 13 Inches. 15 Inches. Face Width 5 in. 6 in. 5 in. 6 in. 5 in. 6in. 7 in. 5 i n. Oin. 7in. 5 in. 6in. 7 in. Cut and i^orunia Complete 1.10 1.94 1.18 2.02 1 26 2.22 1.34 2.30 1.32 2.30 1.40 ^.38 l.LO 2.4b 1.50 2.-S 1.60 2.68 1.70 2.76 1.70 2.90 1.82 3.02 1.92 3.12 20 in. *8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches. Face Width 5 in. 6 in. 5 in. 6in. 5in. 6 in. 7 in. 5 in. ' Bin. 7 in. 5 in. Oin. 7in. Cut and Foruieu 1.26 2.22 1.34 2.30 1.35 2.36 1.44 2.44 1.54 2.61 1.64 2.74 1.74 2.84 1 74 2 96 1.84 3.06 1.94 3.16 1.94 3.26 2.C4 3.36 2.14 3.46 22 in. *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face Witlth 5 in. 6 in. 5 in. 6 in. 5 in. 6 in 7in. 5in. 6 in. 7in. 5 in. 2.14 3.L6 6 in. 7 in. Cut and I'urintd Complete 1.46 2.52 1 54 2.60 1 1.54 2.64 1.64 2.74 i 1.74 2.96 1.84 3.06 1.94 3.16 1.94 3.26 2. 04 3.36 2.16 3.48 2.24 3 6b 2.34 3 76 24 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. 6in. 7in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 6 in. 7 in. Sin. 6 in. 7 in. 1 Sin. Cut ana Furmea 1.54 2.66 1.64 2.76 1.74 2 86 1 74 2. 98 1.84 3.08 1.95 3 20 1 96 3.30 2.05 3.40 2.18 3.52 2.26 3.70 2.38 3.82 2.42 .3.86 2.50 4.06 2.62 4.18 2.66 4 22 26 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 5 in. 6in. 7 in. 5in. 6 in. 7 in. 6in. 7 in. Sin. 6in 7in. Sin. 6 in. 7 in. 8in. Cut and Formed 1.76 3.00 1.86 3.10 1.96 3.20 1.98 3.32 2.08 3.42 2.18 3.52 2.28 3 72 2.38 3.82 2.44 3 88 2.52 4.08 2.64 4.20 2.68 4.24 2.76 4 46 2.88 4.58 2.92 4.62 28 in. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width 6 In. 7 in. 8in. 6 in. 7 in. Sin. 6 in. 7 in. Sin. 6 in. 7in. Sin. 7 in. Sin. Oin. Cut and i? ormed Complete 2.08 3.44 2.20 3.56 2.24 3.60 2.30 3.76 2.40 3.86 2.46 3.92 2.54 4 12 2.65 4.24 2.72 4.30 2 82 4.54 2.94 4.66 2.98 4.70 3.18 5.06 3.24 5.12 3.34 5.22 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7in. Sin. 6 in. 7 in. Sin. 7 in. 8in, 9in. 7 in. Sin. 9 in. 7in. Sin. 9 in Cut and Formed 2 23 3 74 2.40 3.86 2.44 3.90 2.56 4.14 2.66 4.24 2.72 4.30 2.96 4.68 3.02 4.74 3.12 4.84 3.22 5.10 3.28 5.16 3.40 5.28 3.48 5.52 3.54 5.58 3.66 5.'-.0 32 in. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width 6iu. Tin. Sin. 7 in. 8 in. 9 in. 7 in. Sin. 9 in. 7 in. 8 in. 1 9 in. 7 in. Sin. 9 in. Cut and Formed 2.56 4.16 2.68 4.28 2.72 4.32 2.96 4.70 3.02 4.76 3.12 4.86 3.28 5.18 3 34 5.24 3.45 5.36 3.52 5.58 3.58 5.64 3.70 5.76 3.83 6.06 3 88 6.12 4. CO 6.24 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width 7 in. Sin. 9in. 7 in. Sin. 9 in. Sin. 9 in. 10 in. 8 in. Oin. 10 in. Sin. Oin. 10 in. Cut and Formed Complete 2.94 4.68 3.00 4.74 3.12 4.86 3.26 5.1G 3.34 5.24 3.43 5.36 3.58 5.64 3 70 5.76 3.76 5.82 3.90 6.14 4.02 6.26 4.08 6.32 4.18 6.56 4. 32 6.70 4.38 6.76 36 in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face "W idth 1 7 in. S in. 9 in. 8 in. 9 in. 10 in. Sin. 9 in. lOin. Sin. 1 9 in. lOin.l Sin. Oin. lOin Cue and FormeU Complete 3.28 5.20 3.34 5.26 3.46 5.38 3.64 5.72 3.75 5.84 3.82 I 5.90 3.92 6.18 4.04 6.30 4.12 6.38 4.22 6.62 4.34 6.74 4.42 1 6.82 4.52 7.06 4.64 7.18 4.72 7 26 33 in. 17 Inches. 19 Inches. 21 Inches. 23 Inches. 25 Inches. Face Width Sin. 9 in. lOin. Sin. 9 in. 10 in. Sin. 9 in. lOir.j 8in. 9 in. lOiu.j Sin. 9 in. 10 in. Cut and Formed Complete 3.58 5.6U 3.70 5.78 3.73 5.86 3.90 6.16 4.04 6.30 4.10 6.36 4.22 6.62 4.34 6.74 4.42 6.82 4.52 7.06 4.66 7.20 4.74 7.28 4.86 7.56 5.00 7.70 5. OS 7.78 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. 94 THE KITTKEDGE CORJs'ICE Al^B Olil^AMEKT COMPANY. DESIGN No. 857. Face: Sunk, wita Leaf. Sides: Sunk Scrolled -Panel. Note.— This design Is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27 1 foot. 16 in. 13 in. Projection "^^6 Inches. Face Width. Cut and Formed Complete Projection Face Width. Sin. Gin .96 1 .'-.0 1.04 1.78 *7 Inches. sin. 6 in 8 Inches. 5 in. I.IC 1.94 6in. Tl8 2.02 *9 Inches. .5in. 6in 10 Inches. 5|n^ 122 2 20 1 n. 128 1.38 2. 26 2.C.G 11 Inches. 5 in. 6 in. 7 in. 12 Inches. 1.36 2 42 6 in. I 7 in. 1.44 2.50 1.54 2. 60 13 Inches. 5in. 6in. 15 Inches. 5 in. 20 in. 22 in. 24 in. 26 in. 28 in. 30 in. 32 in. 34 In. 36 in. 38 in. Cut and I'ormuu. Complete Projection Face Width Cut and Formed Complete Projection Face Width Cut and Fornifcd Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formca Complete Projection Face Width, Cut and l oruied. Complete Projection Face Width Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width . Cut and Formed. Complete Projection Face Width Cut and Formed Complete 1.12 1.20 1 .96 2 L4 1 26 2,22 1 34 2.30 1.38 1.46 1.56 2.44 2.52 2.62 1.56 2 72 1 66 2.82 1.76 3.92 1.76 3.04 1.88 3.16 1.98 3.26 *8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 1 26 2.22 1.34 2.30 5 in. 1.42 2.50 5in. 6in. 7 in 1.50 2.58 1.50 1.70 1 80 2.78 2.88 2.98 Sin. 1 80 3.10 1.90 3.20 5 in. 2 00 3.30 2.00 3 40 Gin. 2.10 3.£0 7in. 2.20 3 60 *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. S in. 1.48 2.54 6 in. 1.56 2.62 5 in. 1.60 2.78 5 in. Bin 7 in. 1.70 2.88 1.80 1.90 2 00 3.10 3.20 3.30 Sin. Gin. 7 in 2.00 2.10 2.22 3.40 3.50 8.62 5 in. 2.22 3.74 6 in. 2.32 3.84 7in, 2.42 3 94 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Sin. fiin. 7 in. 1.60 2.80 1.70 2.90 1.80 3 00 Sin. j Gin. 7 in 1 80 3 12 1 3.22 Sin, 2.03 3 34 m. Tin. 2 02 2.12 3.44 3.54 6in. 7in. 8)n 2.24 3.66 2.34 3.88 2.45 4.00 6 in. 2.50 4.04 2.titi 4.24 7 in. I 8 in, 2.70 4.36 2.74 4 40 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. Sin. 6in. 7 in 1.82 3.14 1.92 3 24 Sin. 6in. 7in 2.02 3.34 2.04 3 46 2 14 3 56 in. 7 in. Sin 2.24 3.66 2.36 3 90 2 46 4.00 Gin 7 in. 2 52 4 06 12 Inches. 14 Inches. 16 Inches. Projection Face Width Cut and Formed. Complete Gin. 7 in. 2.14 3 58 3 70 Gin. 7in. Sin. 2.30 3.74 13 Inches. Gin. 7in. Sin 2.35 2.48 2.52 3 92 4.04 4.08 14 Inches. 2.54 4.34 7in. I 8in. 276" Xio 4.46 4 50 15 Inches. 7 in. Sin. 9 in 3.02 308 3.20 4.b6 4.92 5.04 16 Inches. 7in. Sin. 9in 3 34 3 .40 3 52 5 34 S.40 S.52 17 Inches. 3.68 5.84 9in. 5.96 lOin. 6.04 2.38 3 91 2.48 4.04 in. 7 in. 2 54 4.10 2.62 2.74 2.80 4 30 4 42 4.48 15 Inches. 17 Inches. 7 in. 2. 64 4.32 2.74 4.42 9in 7 in. 2.80 4.48 3.04 4.t6 3.10 4.92 9in. 3.20 5.02 16 Inches. 18 Inches. 7 in. 3.04 4.88 Sin. 3.10 4.94 7 in. 3.20 5.04 3.34 5.32 3 40 5.38 9 in. 3.52 5.50 17 Inches. 19 Inches. 7in. 3.32 5.30 Sin. 9in. 3 40 5.38 Sin. 9 In, 10 in 3.52 5.50 3.68 5.82 3 80 3.85 5 94 6 00 18 Inches. 20 Inches. 3.74 5 90 9in. lOin. 3.86 6 02 3.92 6.08 19 Inches. 9in. lOin, 4.00 6.34 4.14 6.48 i.20 G 54 Sin. 9in. lOin 4.02 4.14 4.22 6.36 6.48 6.56 21 Inches. n. 9in. lOin 4.32 6.82 4.44 6.94 4.52 7.02 2.50 4.26 .72 6 in. 7 in. Sin 2.75 4.42 2.84 4 64 2.96 4.76 3.00 410 18 Inches. 20 Inches. 6 in. 2.90 4.72 3.02 4.84 Sin. 7in. 3.05 4.88 3 24 5.20 in. 9in. 3.30 5 26 3.40 5 36 19 Inches. 21 Inches. 7 in. Sin 3.28 5.24 Sin. 9in. 34 3.46 5.30 5.42 3.64 5.76 3.75 S.8S 20 Inches. 22 Inches. 7in. Sin. 9 in 3.62 5.76 3.68 5 82 7 in. Sin. 9 in 3.80 5.94 21 Inches. 9in. lOin. 4.00 4 12 4.18 6.32 6.44 6.50 22 Inches. 4.32 6.82 9in. 4 44 6 94 lOin, 4.52 7.02 23 Inches. 4.62 7.26 9 in. 4.76 7.40 lOin 3 92 6.24 3.98 6.30 4.10 6.42 23 Inches. S n. 4.28 6.76 9in. 4.44 6.90 10 in. 4.48 6.96 24 Inches. 8in. 4.62 7.26 9in. 4.74 7.38 lOin 4.82 7 46 25 Inches. 4.98 7.78 9in. 5.12 10 in. 5.20 8.00 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. THE KITTREDGE CORNICE AKD ORl^"AMEJs"T COMPAisY. 95 DESIGN No. 858. Face: Sunk, with Leaf. Sides: Sunk ScroUcd-Panel, ^yith Stamped Ornament. B.— This Design Is to be regarded as a type of a class. The f ollowins flgures are applicable to ail Brackets possessing the same general features of ornamentation. Patterxs extra in all cases. See Introductory Note, page 27. Scale : }i Inch = 1 foot. DEPTH. IS in. IS in. 20 in. Projection Face Wi.Uh Cut and i'oriued. Complete Projection Face Width, cue and I'ormea Complete Projection Face Width. Cut and i'ormed. Complete Projection 22 in. 2i in. 26 In. Face Width. cut and Formed. Complete Projection Face Wifith. cut and lormtd. Complete Projection Face Width. 23 in. 30 in. 32 in. cut and Formed. Complete Projection Face Width. *6 Inches. 5 in. MO 1.86 6 in. 1 18 1 .1)4 7 Inches. 5 in. 1.30 2.18 1.38 * 8 Inches. 5in. I fiin, 1.48 2.48 1.56 2.56 9 Inches. I 5 in . 1.74 2.84 1.82 2.96 ■""8 Inches. I 10 Inches. .Tin. 2.16 6in. 2.24 *9 Inches. 1.48 2.4S 1.56 2.56 10 Inches. .5 in, 1.76 2.90 6ii. 1.84 2.98 11 Inches. 5in. 5 in. 1.96 3 22 6 in 2.06 3.32 1.S4 2.58 6 in. 1.60 2 64 1.70 2.74 11 Inches. 5 in . 1.72 2.84 Gin 1.80 2.92 7in. 1.90 3.02 12 Inches. 5 in. 1.96 3.22 6 in. 2.06 3.32 7in. 2.16 3.42 10 Inches. cut and Formed. Complete Projection Face Width, cut and i ornied. Complete Projection Face Width. Cue and formed. Complete 34 in. 36 in. 33 in. Projection Face Width . Cut and Formed. Complete Projection Face Width. cut and i ormed. Complete Projection Pac°, Width. Cut and ij ormed. Complete 5in. 1.96 3.24 2.06 3.34 7in, 2.16 3.44 11 Inches. 5 in. 3.64 b m . 2.32 3.74 7 in. 2.42 3.84 12 Inches. 2.60 4.14 Tin. 2 72 4.26 2.76 4.30 13 Inches. 2.88 4.56 7 in. 3.00 4.68 Sin. 13 Inches. 5 in, 2.20 3.60 2 30 3.70 7 in. 2 40 3.80 12 Inches. 5 in , l.VO 2,82 6 in . I 7 in . 178 2.90 1.88 3.00 13 Inches. 5 in. 1.92 3.16 6in, 2.02 7 in. 2.12 14 Inches. 5 in . T20' 3.60 2.30 3.70 7 in, 2.40 3.80 3.04 4.72 12 Inches. 5 in. 2.20 3.62 6 in. 2.30 3.72 7in. 2.42 3.84 13 Inches. 5 in . Gin 2.50 2.60 4.02 4.12 7in, 2.70 4.22 14 Inches. 2.90 7in. 3.00 4.58 4.68 4.74 15 Inches. 14 Inches. 3.24 5. 06 7in. 3.36 5.18 Sin, 3.40 5.22 15 Inches. 7i 3.70 5.68 Sin. 3.76 5.74 9 in 3.88 5.86 16 Inches. 4.10 6.24 4.16 G.30 9 in, 4.28 G.4-2 17 Inches. 9in, 4.54 4.66 6.86 6.98 10 in 3.24 5.04 7in, 3.CJ4 5.14 3.40 5.20 14 Inches. 5 in. 2.48 4.00 2.53 4.10 7in, 2.70 4.22 15 Inches. in . 7 in. 4.54 4.64 Sin. 3.04 4.70 16 Inches. 3.22 5.02 7 in. 3.34 5 14 15 Inches. Sin. 2.46 3.96 Gin. 2.56 4.06 7 in. 2.68 4.18 16 Inches. 6 in. 2.86 4.52 7ii. 2.98 4.64 Sin. 3.02 4.68 17 Inches. 7 in. 3.20 3.32 4.98 5.10 3.36 5.14 3.40 5.20 17 Inches. 16 Inches. 7 in. 3.72 5.70 Sin 3.78 5.76 Oin, 3 88 5.86 17 Inches. 7 in. 4.08 6.20 Sin. 4.16 6.28 9 in, 4.28 6.40 18 Inches. 4.60 6.92 9 in. 4.72 7.04 10 in 4.78 7.10 19 Inches. I Sin, 4.74 4.96 7.06 7.46 5.10 7.60 10 in 5. 16 7.66 7 in. I Sin. 3.72 5.68 3.78 5.74 5.84 18 Inches. 7 in. 4 10 6.22 4.16 6.28 9 in. 4.28 6.40 19 Inches. Sin, 4 54 6.84 ^iii^ "4~66 6.96 4.72 7.02 20 Inches. Sin. 4.98 7.48 9in, 5.10 7.60 lOin. 5.18 7.68 21 Inches. Sin, 5.38 S.C6 Oin. 5.50 8.18 lOin. 5.58 8.26 18 Inches. 3.58 5.54 7 in. 3.70 5.66 3.74 5.70 19 Inches. 15 Inches. 5 in. 2,16 3 54 6in, 2.28 3.66 2.38 16 Inches. 2.46 3.96 2.56 4.06 7 in. 2.66 4.16 17 Inches. 5 in . ^74" 4.38 6 in. 2.84 4.48 7 in. 2.94 4.58 18 Inches. 6 in. 3.13 4 96 7 in. 3.30 5.08 3.34 5 12 7 in . 4.04 6.14 4.10 6 20 Oin. 4.22 6.32 20 Inches. 19 Inches. 6in, 3.52 5 46 7 in. 3.64 5 58 3.68 5.62 20 Inches. 7 in. 4.00 6.10 4.06 6.16 4.16 6.26 21 Inches. 7 in, 4.48 Sin. 4.54 6.84 Oin, 4.66 6 96 21 Inches. Sin, 4.96 7.44 9 in. 5.08 7.56 10 in 5 14 7.62 22 Inches. 5.38 8.06 9in. 5 50 8.18 lOin 5.58 8.26 23 Inches. Sin. I Oin. 5.30 5.94 8.62 8. 76 lOin 6.02 8.84 7 in. 4.44 6.72 4 50 6.78 9 in 4.62 6.90 22 Inches. 7 in. Sin. 4.94 7.42 9 in. 5.06 7.54 23 Inches. Sin. 5.34 8.00 Oin. I lOin. 5~54 5. 48 8.14 8.20 24 Inches. 5.80 8.62 5.92 8.74 lOi' 6.00 8.82 25 Inches. Sin. I 9 in. 6.30 6.44 9.30 9.44 lOin. 6.52 9.52 * Sizes marked with a star are priced as Corbels ; that is, without Top-Mouldings. 96 THE KITTREDGE CORXICE AXD OKXAMEXT COMPANY. DESIGN No. 859. Face: Sunk, with Leaf. Sides: Incised. X B —This Design is to be regarded as a tvpe of a class. The following: figures arc applicable ■ ■ to all Brackets possessing the same general features of ornamentation. Patterns extra In all cases. See Introductory Note, page 27. DEPTH. *6 Inches. *8 Inches. ■ 10 Inches. 12 Inches. Face Width 5 in. 6 in. 5 in . 6in. 5 in. 6in. 1 7 in. 5 in. 6in. 1 7in. 15 in. - (Jut and Foraiea. . Complete 1.C8 1 .88 1.15 1.116 1.22 2.12 1.30 2.20 1.50 2.80 1.55 2.86 1.65 2.96 1.68 3.10 1.76 3.18 1.85 3.28 *7 Inches. *9 Inches. 11 Inches. 13 Inches. 15 Inches. IS in. Face Width 1 Sin. 6in. 5 in. 6 in. 5 in. 6 in. 7 in. 5in. 1 6in. 7 in. 5 in. 6in. 1 7in. Cut and ForineU . . Complete j 1.24 2.14 1.32 2.22 1.42 2.44 1.50 2.52 1.70 3.12 1.78 3.20 1.88 3.30 1.92 3.48 2.02 3.58 2.12 3.68 2.15 3.90 2.28 4.02 2.38 4.12 20 in. * 8 Inches. 10 Inches. 12 Inches. 14 Inches. 16 Inches, Face Width i 5in. 6 in. 5 in. 6in. 5 in. 6in. 7in. 5 in . 6in. 7 in. 5 in . Bin. 7 in. Cut and i'oimeu . . 1.42 3.44 1.50 2.52 1.74 3.18 1.82 3.26 1.96 3.54 2.05 3.64 2.16 3.74 2.20 3.96 2.30 4.06 2.40 4.16 2.44 4.34 2.54 4.44 2.64 4.64 22 in. * 9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches, Face Width i 5 in. 6 in. 5 in. 6 in 5 in. 6 in. 7 in. 5 in . 6 in. 7in. 5 in. 6 in. 7 in . cut and Formed. . 1.62 2.74 1 1.^0 2.82 1.96 3 51 2.06 3 64 2.20 3.98 2.30 4.08 2 40 4.18 2.44 4.34 2.54 4.44 2.66 4.56 2.70 4.76 2.80 4.86 2 90 4.96 2i in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. 6in. 7 in. 5 in. 6in. 7 in. 5 in . 6in. 7in, 6 in. 7ii. Sin. 6 in. 7in. Sin. Cut and Formed. . 1.96 3.5S 2.06 3. 68 2.15 3.78 2.20 3.J8 2.30 4.08 2.42 4.20 2.45 4.38 2.56 4.48 2.68 4.b0 2.82 4.90 2.94 5.02 2.98 5 06 3.08 5.32 3.20 5.44 3.24 5.48 26 In. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. 6 in . 7in. 5 in . 6in. 7in. 6 in. 7 in. Sin. 6in. 7in. Sin. 6in. 7 in. 8 in. 5.94 Cut and J^'ormea. . 2.22 4.0U 2.32 4.10 2.42 4.20 2.48 4.40 2.58 4.50 2.68 4 60 2.84 4.92 2.94 5.02 3.00 5.08 3.10 5.34 3.22 5.46 3.26 5.50 3.36 5.78 3.48 5.90 28 in. 12 Inches. ' 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width 6 in. 7 in. Sin. 6 in. 7in. Sin. 6in. 7 in. Sin. 6in. 7 in. Sin. 7 in. Sin . 9in. vjut and Formed. . 2.58 4.62 2.70 4.64 2.74 4.68 2.86 4.96 2.96 5. 06 3.02 5.12 3.12 5.38 3.24 5.50 3.30 5.56 3.42 5.86 3.54 5. 98 3.58 6.02 3.80 6.42 3.86 6.48 3 96 6.58 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6in. 7 in . Sin. 6 in. 7 in. Sin. 7 in. 3.56 6.00 Sin. 9 in. 7in. Sin. 9in. 7 in. 8 in. 9in. Cut and Formed. . 2.84 4.94 2.96 5 06 3.00 5.10 3.14 5.40 3.24 5.60 3.30 5.56 3.62 6.06 3.72 6.16 3.84 6.46 3.90 6 52 4.02 6 64 4.15 6.96 4.22 7.04 4.34 7.16 32 in. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. Face Width 6 in. 7in. Sin. 7 in. Sin. 9in. 7in. Sin. 9in. 7in. 8in. 9 in. 7 in . Sin. 9 in. Cut and Formed. . 3.14 5.40 3 26 5.54 3 30 5.58 3 56 6.02 3 62 6.08 3.-2 6.18 3.90 6.54 3.95 6.60 4.03 6.72 4.20 7.04 4.26 7.10 4 38 7 .22 4.54 7.60 4.60 7.66 4.72 7.78 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width ' 7 ir> . Sin. 9 in. 7 in. Sin. 9 in. Sin. 1 9in. 1 lOin Sin. 9 in. 10 in Sin. 9 in. lOin. Cut and Formed. 3.54 6.00 3.60 6.06 3.72 6. IS 3.88 6.52 3 96 6.60 4.08 6.72 4 25 7.10 4.38 7.22 4.44 7.28 4.62 7. 68 4.74 7.80 4.80 7.86 4.95 8.22 5.10 8.36 5.16 8.42 35 in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width 7 in. Sin. 9in. Sin. 9 in. 1 10 in Sin. 9in. lOin Sin. 9in. 10 in Sin. 9 in. lOin Cut and Formed. Complete 3.90 6.50 3.95 6.62 4.08 6.74 4.32 7.18 4.44 7.30 4.50 7.36 4.54 7.72 4.75 7.84 4.84 7.92 5.00 8.28 5.12 8.40 5.20 8.48 5.35 8. 82 5.48 8.94 5.55 9.02 33 in. 17 Inches. 19 Inches. 21 Inches. 23 Inches. 25 Inches. Pace Width ' 8in. 9 in. lOin ij Sin. 9 in. 10 in Sin. 9 in. lOin 8 in. 9in. lOin Sin. 9in. lOin. Cut and Formed. Complete i 4 26 7.12 4.38 7.24 4.45 7 32 1 4.62 ! 7.70 4.76 7.84 4.82 7.90 5.00 S.28 5.12 S.40 5.20 8.48 5.85 8.82 5.50 8.96 5.58 9.04 5.74 9.40 5.88 9.54 5 95 9.62 * Sizes marked with a star are priced as Corbels ; that is, without Top-Moulding. THE KITTREDGE COR^^ICE AXD ORKAMEKT COMPAIsY. 97 DESIGN No. 860. Face: Sunk, with two Leaves. Sides : Plain, with Stamped Ornament. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Pattkkns extra. in all cases. See Introductory Note, page 27 SCALK : 14 Inch = 1 foot . DEPTH. 18 in. Projection 20 in. 22 in. 24 in. 26 in. 28 In. 30 in. 32 in. 34 in. 36 in. Face Width (Jut and Formed. Complete Projection Face Width. cut and Formed Complete Projection Face Width. Cue aud Formed. Complete Projection Face Width . cut and Formed. Complete Projection Face Width, cut and Formed. Complete Projection Face Width . Cut and Formed. Complete Projection *9 Inches. Sin. 1.62 2.24 1,74 2.36 10 Inches. 5 in. 1.78 2.52 1.90 2.64 11 Inches. 5 in . Xoo" 2.82 6 in, 2 16 2.98 12 Inches. 5 in. 2 26 3.20 2.42 3.36 7 in, "2:60 3.54 13 Inches. 2.55 3.53 2.72 3.74 7 in . 2.83 3.90 14 Inches. 6 in. 3.05 4.16 7 in. 3.22 4.32 3.28 15 Inches. Face Width I 6 in. cut and Formed. . I 3 . 44 Complete i 4.t6 7in. Sin. 11 Inches. 5 in . 6 in . 1.74 2.46 1.86 2.58 7in. 2.02 2.74 12 Inches. 5 in . 2.82 7 in. 2.16 2.98 2.32 3 14 13 Inches. 5 in. 6 in. 7 in 2.26 3.18 2.42 3.34 2.58 3.50 14 Inches. 2.54 3.56 2.70 3.72 7 in .9J 15 Inches. 6 in, 3.04 4.12 7 in. 3.20 4 2S 3.26 4.34 13 Inches. 5 in . 1.96 2.76 6^in^ "2.12" 2 92 2.23 3.08 14 Inches. 5 in. 2.26 3.18 2.42 3.34 7 in. 2.58 3.50 15 Inches. 5 in. 6 in. 7 in 2.52 rX68 3.52 16 Inches. 7in. 3 24 4.32 17 Inches. 6in. 7in. Sin 16 Inches. 6 in 3.42 4.64 3.60 4. 82 17 Inches. Projection 16 Inches. Face Width . Cut aud FoiiUv.;d. Complete 4.04 5.38 4.10 5.44 9 in. 4.26 5.60 Projection 17 Inches. Face Width. 7 in. 40 in. Cut and Foruieil. Complete Projection Face Width Cut ana Formed. Complete Projection Face Width . Cut and Formed. Complete Projection Pace Width. Cut and Jj'ormed. Complete 4.43 5.92 Sin, 4 56 6. 00 9 in. 5.74 6.18 18 Inches. 5.06 6.64 9 in. 5.24 6.82 lOin 5.30 6.88 19 Inches. 4.04 5.36 9 in. 4.10 5.42 .58 18 Inches. 7 in. 4.50 5.94 Sin, 4.56 6.00 9 in, 4.74 6.18 19 Inches, 9 in. 5.00 6.56 5.18 6.74 10 in 5.24 6.80 20 Inches. 5.54 7.26 9 in, 5 72 7.44 lOin 5.80 7.52 8 in , 5.52 7.24 9in, 5 72 7.44 lOin 5.78 7.50 20 Inches. Sin 6.05 7.92 9in, I lOin, 6.24 8.10 6.32 8.18 21 Inches, 3.40 4. GO 3.^8 4.78 3.62 4.82 ]5 Inches, 5 in , 18 Inches. 3.84 5.16 7 in, 4.02 5.34 4.06 5.S8 19 Inches. 7 in, 4.44 5.86 Sin. 4.50 5.92 9in, 2 22 3 12 6 in, 2.40 3,30 2.56" 3 46 16 Inches. 5 in. 2.52 3.52 2.63 3.68 7 in. 2.84 3.84 17 Inches. 5 in . 3. 9 J 6in 3.00 4.06 7in. 3.16 4.22 18 Inches. 6 in. 3.38 4.58 7 in. 3.56 4.76 3.50 4.80 19 Inches. 6 in. 4.68 6.10 20 Inches. 7 in. 4.94 6.50 5.00 6.56 9in, 5.18 6.74 21 Inches, 3.78 5.08 7 in. 5.26 am. Too" 5.30 20 Inches. 7 in. 3.94 5.24 4.00 5.30 9in. 4.15 5 46 21 Inches. 20 Inches. 7 in 4.40 5.82 4 46 5.88 9 in, 4.62 6.04 21 Inches, 7 in. 4.90 6.44 4.96 6.50 9in. 5.14 6.68 22 Inches. 7in. 5.44 7.14 Sin. 5.50 7.20 9 in. 5.58 7.38 23 Inches, 8 in , 5 52 7,22 9in^ "5 ,70" 7.40 lOin, 5.76 7.46 Sin, 6.02 7.84 9 in 6.22 8.04 10 in 5.28 8.10 22 Inches, 5 06 7.00 9 in. 6.24 8.08 lOin. 5.32 8.16 n, 9in, lOin 5.06 7.90 6.24 8.08 6.32 8.16 22 Inches. 9in, 10 in . 11 in. 6.84 8.78 6.92 7.12 8.86 9.06 23 Inches, n, 9in. lOin 6.62 8.54 6.82 24 Inches, 9 in. 7.46 9.52 lOin. 7.54 llin 7.74 9.80 24 Inches, Sin. 5.62 8.54 9 in. 5. SO 8.72 10 in 25 Inches, 7.24 9.28 9in 7.44 9.48 lOin 7.52 9 56 26 Inches. 9 in. 8.12 10.32 lOin. llin 8.20 8.40 10.40 10.60 4.38 5.78 4.44 5.84 9iiu 4^62 6.12 22 Inches. 7in , 4 86 6.40 4.92 6.46 9 in 5.10 23 Inches. 7in, 5.40 7 08 Sin, 5.46 7.14 5.64 7.32 24 Inches, in, 9in, 10 in 6.00 5.18 6 25 7.82 8.00 8 08 25 Inches. 6.eo 8.50 9 in, 10 in 6.73 8.68 5 85 8.76 26 Inches, 9 in. lOin. 7.22 S.26 7,42 9.46 7.48 9.52 27 Inches, Sin, 7.88 10.06 9in, lOin 8 06 8,14 10.24 10.32 28 Inches, 9 in. 8.78 11.06 10 in. 8.86 11.14 9.06 11.34 ■ Sizes marked with a star are priced as Corbels ; that is, without Top-Moulding 98 THE KITTEEDGE CORXICE AXD OEXAMEXT CO^IPAKY. DESIGN No. 861. Face: Sunk, with two Leave?. 5IDES : Sunk Panel. X. D.— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra In all cases. See Introductory ISTote, page 2'i Scale : Inch = 1 foot. DEPTH. IG h. Projectlou Fare Wi'lth, L/Uo ami i ormed. Complete 2C in. 22 is. 24 in. 25 in. 28 in. 30 in. Projection Face Width . CUD and Formed Complete *9 Inches. 1 41 J. 46 Gin. TW 10 Inches. Projection Face Width. Cue unci i^ormed, Lomplete Projection Face Width. cut and Formed. Complete Projection Face Width , v^ut and J^'ormed. Complete Projection Face Wi(ith cut aud I? ormed. Complete Projection Face Width. v>ut and Formed. Complete 32 in. Projection Face Width. cut and i'ornied. Complete 34 in. 36 in. Projection Face Width. Cut and Formed. Complete Projection Face Width 33 in. Cut and Formed. Complete Projection 5 i n . Pin 1.43 2.5fi 11 Inches. 5 in. 6 in 1.6S 2.82 1.84 2.98 12 Inches, 5in. Cin. 7in. 1 90 3.2U 2.03 3. ye 2.24 3.54 13 Inches. Sin. Gin. 7in 2. 16 3.56 2.32 3.72 £1.48 3.88 14 Inches. in. 7in. Sin. 2.56 4.08 2.72 4.24 2.78 4.30 15 Inches. 6in. 7in. Sin. 286 3.02 4.52 4.68 3.08 4.74 16 Inches. 7in. Sin. Gin. Face Width. cut and Formed. Complete 40 in. Projection Pac-' Width. Cut and D ormed. Complete 3.36 5.18 3.42 5,24 3.58 5.40 17 Inches. in. Sin. 9in. 3.70 5.68 3.78 5.76 11 Inches. 5 in , 1.41 i;.46 C'in, 1.55 2.58 1 7'i S;.74 3.96 5.94 18 Inches. 8 in. 9 in. 10 in 4.12 6.28 4.30 6.46 4. 36 6.52 19 Inches. 12 Inches. n . C in . 7 in 1.63 1.84 2.82 2.98 2.00 3 14 13 Inches. 5 in. 6 in. 7 in I.CIO 2.05 3.18 3. .34 •A.2Z 3.51) 14 Inches. 5 in. 6 in. 7 in 2.14 2.30 2.48 3.54 3.70 3.^^8 15 Inches. 6in. 7in. 2.54 4.04 2.70 4.20 2.76 4.26 16 Inches. 6 in. 2.84 4.50 7 in. 3.02 4.68 S in. 4.74 17 Inches. 7in. Sin. 9in 3.35 5.16 3.42 5.22 3.58 5.38 18 Inches. 7 in. Sin. 9 in. 3.72 3.78 3.96 5.70 5.76 5.94 19 Inches. Sin. in. 9in. lOin 4.42 4 62 6.98 4.68 7.04 20 Inches. 8 in. 9 in. 10 in 4.78 7.30 4.96 7.48 5.04 7.56 4.06 6.20 9 in 4.24 6.38 10 in 4.30 6.44 20 Inches. Sin. 9 in. 10 in 4 44 6.80 4 62 6.98 4.70 7.06 21 Inches. Sin. 9in. lOin 4.78 7.28 4.96 7.46 5.04 7.54 22 Inches. 9in, 5.36 8.02 lOin. 5.44 8.10 11 in 5.64 8.30 13 Inches. 6in \M 1.80 1.96 2.76 2.92 3.08 14 Inches. 5 in. 6 in. 7 in. 1.9C a. 05 3 22 3.18 3.34 3.50 15 Inches. 5in. 6in. 7in. 2,12 2.28 2.45 3. 51) 3.66 3.84 16 Inches. 6 in. 7 in. Sin. 2.52 4.02 2 70 4.20 2 74 4.24 17 Inches. in. 7in. Sin, 2.82 3.00 3.04 4.46 4.64 4.08 18 Inches. in. 7 in. Sin. 3.16 4.96 3.34 5.14 3.38 5.18 19 Inches. 7in. Sin. 9in. .66 3.72 5.68 3.90 5.86 20 Inches. 7in. Sin. 9in 4.00 6.14 4.05 6.20 4.24 6.38 21 Inches. Sin. 9in. lOin 4.42 6.76 4.60 6 94 4.65 7.00 22 Inches. n. 0 in. 10 in 4.78 4.95 5.04 7.28 7.46 7.54 23 Inches. 5.14 7.78 in. lOin 5.34 7.98 5.42 8.06 24 Inches. Om. lOin. 11 in 5.76 8.58 ? 84 S 66 6.04 8.86 15 Inches. 5 in. Cin, i.8(i 3 12 2.04 3.30 16 Inches. 5 in. Cin. 7 in 2.12 3.50 2.28 3.66 2 44 3.S2 17 Inches. 5 in. 6 in. 7 in. 2.34 3.82 2.50 3.98 2 65 4.14 18 Inches. in . 7 in . 2.80 4.44 2.98 4.62 3.02 4.66 19 Inches. in. 7in. Sin. 3.10 4.88 3.28 5.06 3.32 5.10 20 Inches. 7 in. Sin. 9 in. 3 62 5.58 5.64 3.84 5.80 21 Inches. 7in. Sin. 9in. 3.96 6.08 4.02 6.14 4.20 6.32 22 Inches. 7in. 4.34 6.68 4.40 6.74 9in. 4 58 6.92 23 Inches. Sin. 9in. lOin. 4.74 7.22 4.94 7.42 5.00 7.48 24 Inches. Sin. 7.78 9in, 5.32 7.96 10 in 5.4C 8.04 25 Inches. 5,54 S.34 9 in. 5.74 8.54 10 in, 5.82 8.62 26 Inches. in. lOin. llin 6.18 9.20 6.26 9.28 6.46 9.48 20 Inches. 7in. Sin. 9in. 3.26 5.04 3.32 5.10 3,48 5.26 51 Inches. 7 in 8 in. 9 in 3.60 5 54 3 65 5.60 3.84 5 78 22 Inches. 7in. Sin. 9 in 3 92 3.98 4.16 6.04 6.10 6.5.8 23 Inches. 7 in. Sin. Oin 4.30 6.62 4.35 6.68 4.54 6.86 24 Inches. Sin, 4.72 7.20 Oin. lOin 4.90 7.38 .46 25 Inches. Sin. 5. 12 7.74 9in. 5.30 7.92 lOin 8.00 26 Inches. 9in. lOin 5.72 8.52 5.78 8.58 27 Inches. 9 in. 10 in 6 12 9 12 G 20 9 20 28 Inches. 9in. 6.58 9.74 10 in. llin 6.66 9.82 6.86 10.02 * Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. THE KITTREDGE COEXICE AXD ORX.UIE^S'T C03IPAKY. DESIGN No. 862. Face: Sunk, with two Leaves. Sides: Sunk, Scrolled Panel. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Pattekits extra in all cases. See Introductory Note, page 26. Scale : }^ Inch = 1 foot. 13 in. 20 in. 22 in. 24. in. 25 in. 28 in. 30 in. 32 in. 34 in. 36 in. 38 in. Projection jj *9 Inches. Face Winth. Cut and -b'ormea. . Complete Projection 5 in. 1.44 2.46 1 56 2.58 10 Inches. Face Width. cut and Formed Complete Projection 5 in. 6 in 1.54 1.66 2.( 11 Inches. Face Width. Cue and Formed , Complete Projection Face Width. cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. cut and Formed. Complete Projection Face Width. out and Formed. Complete 5in. 6in Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width . Cut and Formed. Complete Projection Face Width. . , Cut and Formed. Complete 40 in. Projection Face Width. Cut and i)'ormed. Complete 1.74 2.93 1.90 3.12 12 Inches. 5in. 6in. Tin. 1 96 3.34 2.12 3.50 2.30 3.68 13 Inches. 5 in. "2~22" 3.70 Bin. 2.38 3.86 Tin, 2,54 4.02 14 Inches. in. 7in. Sin. 2.64 4.26 2.80 4.42 15 Inches. 2-94 4.70 Tin. 3.10 4.86 Sin. 3.16 4.92 16 Inches. Tin. Sin. 9 in 3.44 5.36 3.50 5 42 3.66 5.58 17 Inches. Tin. 5.82 Sin. I 9: 3.84 5 9l» 4 02 6. 08 18 Inches. Sin. 9 in. 10 in 4.22 6.46 4.40 6.64 4.45 6. TO 19 Inches. Sin. T52" 6.96 9in. toil 11 Inches. 1.50 2.60 6uu 1.62 2.72 Tin. .88 12 Inches. 1.74' 2.96 1.90 3.12 T in. 2 05 3.28 13 Inches. 5 in. 1.95 3.32 6 in. 2.12 3.48 Tin 2.28 3.64 14 Inches. 5 in. Gin. Tin 2.20 3.68 2.36 3.84 2.54 4.02 15 Inches. 6in. 7in. Sin. 2.62 4.22 2.78 4.38 2.84 4.44 16 Inches. 6 in. 2.92 4.68 T in, 3.10 4.86 3.16 4.92 17 Inches. (in. Sin. 9 in. 3.44 3.50 5.34 5.40 3.66 5.56 18 Inches. Tin. Sin. 9 in 3.78 5.84 3.84 5.90 4.02 6.08 19 Inches. Sin. 9 in 4.16 6.38 4.34 6.56 10 in 4.40 6.62 20 Inches. in. 9 in. 10 in 4.54 6.98 4 72 T.16 T.24 21 Inches. 4 72 T.16 4 78 T.'22 20 Inches. in. 9 in. 10 in 5.03 T.68 5.14 T.76 Sin. 9in, lOin 4.88 T.48 5.06 T.6G 5.14 T.T4 Inches. 9 .in. 10 in . 11 in 5.46 8.22 5.54 S.30 5. 74 8.50 13 Inches. 5in, 1.70 2.90 6 in, 1.85 3.06 2.02 3.22 14 Inches. 5 in , 1.95 3.32 2.12 3.48 Tin, 2 28 3.64 15 Inches. 5 in. 2.18 3.64 6 in. 2.34 3.80 Tin. 2.52 3.98 16 Inches. in. Tin, 2.60 2 78 2 82 4.20 4. 38 4.42 17 Inches, 6 in. 2.90 4.64 T in , 3.08 4.82 3.12 4.86 18 Inches, n. Tin. 3.24 3.42 5.14 5.32 3.46 5.36 19 Inches. Tin. Sin. 9 in. 3.72 3.78 3 95 5.T6 5.82 6.00 20 Inches. Tin. 4.10 6.32 Sin. 4.15 9in. 4 34 6.56 21 Inches. in. 9 in. 10 in 4.52 4.70 4.76 6.94 T.12 T 18 22 Inches. in. Oin. 10 in 4.88 T.48 5.06 T.66 5. 14 T.T4 23 Inches, 15 Inches. 5 in. 6 in Sin. I 9in. lOin 5.24 T.98 5.44 8.18 5.52 S.26 24 Inches. n. lOin. llin 5.88 8.80 5.96 S 88 6.16 9.08 1.92 2.10 2 25 3 26 3.44 3.60 16 Inches. 5 in. 6 in. Tin 2.18 2.34 2 50 3.64 3.80 3.96 17 Inches, 5in, 6in. Tin 2.42 2.58 2.74 4.00 4.16 4.32 18 Inches. 2.88 3.06 3.10 4.62 4.80 4.84 19 Inches, in. Tin. Sin. 3.18 3.36 3.40 5.06 5.24 5.28 20 Inches. Tin. Sin. 9 in 3.68 3.74 3.90 5.T2 5.78 5.94 21 Inches. Tin. Sin. 9in, 4.06 4.12 4.30 22 Inches, Tin. 4.46 Sin. T50 6.92 9in, 4.58 T.IO 23 Inches. in. 9in. lOin 4.84 5.04 5.10 T.42 T.62 T.68 24 Inches, Sin. 9 in, 10 in 5.24 T.98 5.42 8.16 5. 50 8.24 25 Inches, Sin, 9in, lOin 5 65 8.56 5 86 5.94 S.T6 8.84 26 Inches, 5.32 9.44 10 in. llin 5.40 5-60 9.52 9.72 20 Inches. Tin. I Sin, 3.34 5.22 3.40 5.28 9 in, 3 56 5.44 21 Inches. Tin. 3.66 5 68 in. 9 in 3.90 5.92 22 Inches, Tin, 4.02 6.22 Sin, 9 in 4:08 6.28 4.26 6.46 23 Inches. T in, "Oo" 6.80 in, 9in 4.45 0.86 4.64 T.04 24 Inches, 8in. 4 82 T.40 9in. lOin 5.00 7.58 5.08 T.66 25 Inches, Sin. 5.22 T.94 9 in, 10 in 5.40 8.12 5.48 8.20 26 Inches, 5.54 8.54 in, lOin 5.84 8.T4 5 90 8.80 27 Inches. 6.08 S.18 lOin 6^26 9.36 6.34 9.44 28 Inches. 9 in, "672" 10.00 10 in. llin 6. SO 10.08 7.00 10.28 * Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. ICO THE KITTREDGE CORXICE AXD OENAMEKT COMPANY. DESIGN No. 863. Face: Sunk, with two Leaves. Sides: Sunk, Scrolled-Panel, wath Stamped Ornament. -NT -R —This Design is to be regarded as a type of a class. The following figures are applicable ' to afl Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. DEPXn. 13 ia. Projection ' * 9 Inches, i 11 Inches. 13 Inches. 15 Inches. Face W I'ltn 5 in. 6 in. i 5 in . 6 in. 7in. 'sin. 6 in. 7in. Sin. Oin. 7in. I Uuc and Formcu. . 1 65 2,72 1,78 2.84 j 1.84 3.00 1.96 3.12 2 12 1 3.28 2.06 3.34 2.22 3.50 2.33 3.66 2,32 3 76 2.50 3.94 2.53 4.10 20 ia. 10 Inches 12 Inches. 14 Inches. 16 Inches. Face Width Sin. 6 in j 5in. 6in. 7 in. 5 in . 6 in. 7 in. 5 in. 6in. 7in. c>iic and Formed . . 1.88 3.(J6 2.00 3. IS 1 1 2.10 3.40 2.26 3.56 2 42 3.72 2.36 3.82 2.52 3,98 2 68 4.14 2.64 4.20 2.80 4,36 2.96 4.52 22 in. 11 Inches. i 13 Inches. 15 Inches. 17 Inches. 5 in . 6 in. Is Sin. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in . 6in. 7 in. UUC autl Formea.. 2.10 3.40 2.26 1 3.56 2.30 3.82 2.52 3.98 2.68 4.14 2.64 4.20 2.80 4.36 2,98 4.54 2.94 4.64 3.10 4,80 3.26 4.96 24 12. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 5 in. Bin. 7in. 5 in . 6 in . 7 in 6 in. Tin. 8 in. 6 in. 7 in. Sin. T in. Sin. 9 in. cut and Formed. . 2 36 3.84 2.52 4.00 2.70 4.18 2.66 4.24 2.82 4.40 3.00 4.58 3 12 4.84 3.30 5 02 3 34 5,06 3.43 5.34 3.66 5.52 3.70 5.56 4.02 6,04 4.08 6.10 4 24 6.26 26 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. IT' n ^ TTT ; f K 1 5in. 6in. 7 in . 6 in. 7 in. Sin. 6 in. 7 in. 8 in. 6 in. 7 in. Sin. 7 in . Sin. 9in. cut and ±'ormed. . 2.68 4.26 2.84 4.42 3.00 4.58 3 14 4.86 3.30 5.02 3.36 5. OS 3.50 6.36 3.63 5.54 3,72 5,58 3.86 5.88 4,04 6.06 4.03 6.10 4.42 6 58 4.48 6.64 4.55 6.82 23 la. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 6in. 7in. 8 in. 6in. 7in. Sin. 6 in. 7 in. 8in. 7 in. Sin. 9 in. 7in. Sin. 9in. cut and ijormeu. . 3.16 4.90 3. 32 5.06 3.38 1 5.12 3.52 5.40 3.70 5.58 3.76 5.64 3.92 5.96 4.10 6.14 4.14 6.18 4.44 6.62 4.50 6,68 4. 65 6.84 4.88 7.24 4.94 7.30 5,12 7.48 30 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width 6in. Tin. Sin. 7 in. Sia. 9 in. 7 in. Sin. 9 in. 7in. Sin. 9in. 7in. Sin. 9in. cut and Formed. . Complete 3 54 5 42 3.70 5.58 3.76 5.61 4.12 6.16 4 18 6.22 4 32 6.38 4.48 6.66 4.54 6.72 4.72 6.90 4.92 7.28 4.98 7.34 5.15 7.52 5.35 7.92 5.42 7.08 5.60 8.16 32 in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Wi'lth 7 in. Sin. 9 in. 7 in. Sin. 9 in. 7in. Sin. 9in. Tin. Sin. 9in. Sin. Oin. 10 in cut and Formed. . Complete 4.12 6.18 4.18 6.24 4.34 6.40 4.54 6.74 4 60 6.80 4.78 6.98 4.96 7 34 5.02 7.40 5.2C 7. 58 5.40 7.93 5.46 8.04 5.64 8.22 5 88 8.64 6,06 8,82 6.14 8.90 34 in. 17 Inches. 19 Inches. 21 Inches. 23 Inches. 25 Inches. Face Width 7 in. Sin. 9 in. Sin. 9 in. lOin. Sin. 9in. Oin. Sin. 9 in. lOin. 8 in. 9in. 6.53 9.48 10 in. Cue and i^'ormetl. . Complete 4 52 6.72 4.60 6.80 4 78 6.98 5 02 7.40 5.20 7.58 5.26 7.64 5 8.06 5.66 8.24 5,72 8 30 5.90 8.66 6.10 8,86 5.16 8.92 6.40 9.30 6 66 9.56 36 in. 18 Inches. 20 Inches. 22 Inches. 24 Inches. 26 Inches. Face Width ji Sin. 9in. lOin. Sin. 9 in. lOin. Sin. 9 in. lOin. Sin. 9in. 10 in Sin. 9in. lOin. Cut aud Formed. . Complete 5.03 7.48 5.23 7.65 5.32 7.72 5.50 8.10 5.63 8.28 5.'i5 8.36 5.94 8.72 6.12 8.90 6.20 S,9S 6.42 9.34 6.50 9.52 6.68 9.60 5.96 10.06 7.16 10.26 7.22 10.32 33 in. 19 Inches. 21 Inches. 23 Inches. 25 Inches. 27 Inches. Face Width 8 in. 9 in. lOin. 8in. 9in. 10 in. Sin. 9in. lOin. Bin. 9in. 10 in. Sin. 9 in. lOin Cut and Formed. . 5.48 8.U8 5.68 8.28 5.74 8.34 5.94 8.72 6 12 8.90 6.20 8.93 6.42 9.34 6.62 9.54 6.70 9.62 6.98 10.08 7,18 10.28 7.25 10.36 7.55 10.86 7,74 11.04 7.82 11.12 40 in. 20 Inches. 22 Inches. 24 Inches. 26 Inches. 28 Inches. Face W idth 8in. 9 in. 10 in. 9in. lOin. 11 in. 9 in. lOin.l llin. 9 in. 10 in. llin. 9 in. 10 in. llin 8.65 12.14 Cut and f ormed. . Complete 5.94 8.74 6.12 8.92 6.20 9.00 6.64 9.58 6.72 S.66 6 92 9.86 7.20 10,32 7.28 7.43 10.42 |10.60 7.80 11.12 7,88 11.20 8-08 11.40 8.38 11.86 8,46 11,94 * Sizes marked with a star are priced as Corbels ; that is, without Top-Moulding. Scale: M Inch = 1 foot. THE KITTREDGE CORNICE A^^D ORIs^AMENT COMPAKY. IQl DESIGN No. 864. Face: Sunk, with two Leaves. Sides: Incised. X. C— This Desigjn is to be regarded as a type of a class. The following figures are applicable 10 all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. DEPTH. IS h. * 9 Inches. 11 Inches. 13 Inches. 15 Inches. 5 in. 6in. Sin. Oin. T 94" 3.40 7 in . 5 in. Oin. 2.22 3.82 7 in . 5 in . Oin. I 7 in. (Jutaiul i'oriuca.. Complete 1 60 2*68 1.72 2.80 1.82 3.28 2 10 3.56 2.06 3.66 2.38 3.ys 2.32 4 12 2 50 2.66 4 30 4.46 20 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. Face Width 5 in. 6in. 5 in . 6 in . 7 in. 5 in . Oin . 7 in. 5 in . Oin. 2.78 4 74 7 in . cut and Foimea . . Complete 1.86 3.34 1.98 3.46 2.10 3.72 2.26 3.88 2 42 4.04 2.36 4 18 2.52 4.34 2.68 4 50 2.62 4.58 2 94 4.90 22 ia. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Fac^ Width 5 in . 6in. 5in. 6in. 7 in. 5 in. 6 in. 7 in. 5in. 6 in. 7 in . (Juc aud ±urmed.. Complete 2.10 3.72 2.26 3.88 2.36 4.20 2.52 4.36 2.68 4.52 2.72 4. 58 2.78 4.74 2.96 4.92 2 90 5.02 3.06 5.18 3.22 5.34 24 in. 12 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. r ace w in un 5 in. 6in. 7in. 5 in . 6 in. 7 in 6in. 7 in. Sin. Oin. 7 in. Sin. 7 in . 8 in. ~3T92" 6 42 Oin. 4 08 6.58 v.ut and Formed. . Complete 2 36 4.20 2.52 4.36 2.70 4.54 2.64 4.02 2.80 4.78 2.98 4.96 3.08 5.22 3.26 5 40 S, 0 5.44 3.38 5.70 3.56 5.88 3.60 5.02 3.86 6.32 25 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 5 in. 6 in. 7 in. 6 in. 7 in . Sin. 6 in. 7 in. Sin. 6 in. 7 in. Sin. 7 in. 4.22 6 90 Sin. 9 in . cut and Jb'ormed. . Complete 2.66 4.64 2 82 4.80 2.93 4.96 3 10 5.24 3.26 5.40 3.32 5.46 3.40 5.72 3.58 5.90 3.62 5.94 3.70 6 20 3.88 6.38 3.92 6.42 4.28 6.96 4.46 7.14 23 In. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 6in. 7in. 8in. 6in. 7 in. Sin. 6 in. 7in. Sin. 7 in. Sin. 9 in. 7in. Sin. 9in. v^ut aud t uriiied. . Complete 3.12 5.28 3.28 5.44 3 34 5.50 3.42 5.76 3.60 5.94 3.66 6.00 3.76 6.28 3.94 6 46 3.98 6.50 4.24 6.94 4.30 7.00 4.45 7.16 4.50 7.50 4.65 7.56 4.84 7.74 30 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. 6in. 7in. 8 in. 7 in. 8in. Oin. 7 in. Sin. Oin. 7in. Sin. 9in. 7in. Sin. 9 in. K^iit and Formed. . Complete 3 44 5 78 3.60 5.94 3.66 6.00 3.26 6.48 4.02 6.54 4 18 6.70 4.28 6.98 4.34 7.04 4.52 7.22 4.64 7.52 4. 70 7.60 4.88 7.78 5. 02 8.16 5.08 8.22 5.26 8.40 32 in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. x ace w intn 7 in. Sin. 9in. 7in. Sin. Oin. 7in. Sin. 9 in. 7in. Sin. 5.12 8.28 9 in. Sin. 9 in. 10 in *./Ut and Formed. . Complete 3.93 6.50 4.02 6.56 4.18 6.72 4.34 7.06 4 40 7.12 4.58 7.30 4.68 7,60 4.74 7.66 4.92 7.84 5.06 8.22 5.30 8.46 5 50 8.86 5.68 9.04 5.76 9.12 34 in. 17 Inches. 19 Inches. 21 Inches. 23 Inches. 25 Inches. r ace \\ luTii 7in. 8 in. 9 in. Sin. 9 in. 10 in. Sin. 9 in. iOin. Sin. Oin. 10 in . Sin. 9in. 10 in. Cut and *'ormed. . Complete 4 32 7.04 4.u0 7.12 4.58 7.30 4.74 7.66 4.92 7.84 4.98 7.90 5 14 G.30 5.32 8.48 5.38 8.54 5.52 8.88 5.72 9.08 5.78 9.14 5.95 9.60 6 14 9.t8 6.22 9.76 36 in. 18 Inches. 20 Inches. 22 Inches. 24 Inches. 26 Inches. Face Width 8i^. Oin. lOin. 8 in. 9 in. lOin. Sin. Oin. lOin. Sin. 9 in. 10 in Sin. Oin. 10 in. (Jut and Formed. . Complete 4.80 7.74 4 98 7.92 5.04 7.98 5.16 8.34 5.34 8.52 5.42 8.60 5.56 8.94 5.74 0.12 5.82 9 20 5.98 9.54 6 16 9.72 6.24 9.80 6.40 10.16 6 60 10.36 6.66 10.42 33 in. 19 Inches. 21 Inches. 23 Inches. 25 Inches. 27 Inches. Face Width 8 in. Oin. lOin. 8in. 9 in. lOin. Sin. 9in. lOin. Sin. Oin. lOin. Sin. 6.86 10.86 Oin. lOin. cut and Jb'ormed. . Complete 5.14 8.a2 5.34 8.52 5.40 8.. 58 5 56 8.94 5 74 9.12 5.82 9.20 5.98 9.54 6.18 9.74 6.26 9.82 6.42 10.18 6.52 10.38 6.70 10.46 7.04 11.02 7.12 11.12 40 in. 20 Inches. 22 Inches. 24 Inches. 26 Inches. 28 Inches. Pfce Width 8 in. Oin. 10 in. 9in. tOin. 11 in. Oin. lOin. 11 in. 9 in. 10 in. 11 in. Oin. 10 in. llin Cut and Formed. . Complete 5.56 8.96 5.74 9.14 5.82 9.22 6.20 9.78 6.28 9.86 6 48 10.06 6.54 10.42 6.72 10.50 6.92 10 70 7.10 11.12 7.18 11.20 7 38 11.40 7.54 11.74 7.62 11.82 7.82 12.02 * Sizes marked with a star are priced as Corbels ; that is, without Top-Moulding. Scale: M Inch = 1 foot. 102 THE KITTEEDGE CORXICE AXD ORis'AMEKT COMPANY. DESIGN No. 865. P'ace: Double Sunk. Sides: Plain. XOTE. -This desi'^n Is to be regarded as a type of a class. The following figures are applicable to all "^Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. Scale: I4 Inch =1 foot. DEPTH. 14 in. 16 in. 13 in. 20 in. Projection Face Wi'lth . (Jut and Formed Complete * 5 Inches. 3 in. I 4 Sin. .66 1.14 Projection Ffice Width. (Jut and iormeu. Complete Projection Face Width. Cut anil Formed. Complete Projection . . , Face Width Cut and Fomifcd Complete 22 in. 24 in. 26 in. 28 in. 30 ij 32 in. 34 in. 36 in. Projection Face Width. Cut and Formed. Complete Proiection Face Width . cut and Formed Complete Projection Face Wiilth.. . *6 Inches. .82 1.40 5 in. .84 1.42 Gin. .83 1 46 Inches. 4 in. I 5 .96 1,60 .98 1.62 6 in. 1.02 1 66 "8 Inches. 1.10 1.82 5 m. bin. 1.12 1.S4 1.15 1.S8 '•'•9 Inches. 4 in. j 5 in. | Bin, ■^7 Inches. 1.30 4 in. .78 1.32 1.34 *S Inches. 4 in. 92 1.56 .94 1.58 6 in. 1.62 *9 Inches. 4in. 1.10 1.82 5 in. 1.12 1.84 6in. 1.16 1.88 10 Inches. 1 30 2.18 5 in. 1.34 2.22 6 in. 1.38 2,26 11 Inches. 1 30 1.32 1,35 2.08 2,10 2.14 10 Inches. 5 in. 6 in, | 7 in. 1.50 1.54 1 58 2 50 2,54 2.5S 11 Inches. Cut and oruicd. Complete Projection 5 i • . I 6 in. 1 in Face Width, Cut and Formed. Complete Projection 1,70 2.78 1.74 2.82 1.78 2.86 13 Inches. 6 in T~96" 3.16 2,02 3.22 Sin. 2.06 3.26 13 Inches. Face Wid th . . 6 it.. cut and Formed 2,16 Complete 3 44 Projection Face Width Cut and Formed . Complete Projection Width Cut and Formed. Complete . . Projection Face Width Cut and Formed. (Jomplete 2.22 3,50 2.26 8.54 14 Inches. i.44 2.40 5 in. I 6 in. 1,48 2.44 "9 Inches. 1.52 2,48 12 Inches. 5 in. I 6 in. j 7 ii 1,68 1.72 ^1,78 2,76 2,80 2,86 13 Inches. 5in. I Gin. 1 SO 3 06 1.94 3,10 4 in I 5 in. ! 6 in. 90 .34 1 .96 1.50 1,54 1,56 10 Inches. 5in. 1.14 1.92 Gin. 1.15 1,94 1 20 1.98 11 Inches. 5in 1.28 2.12 6in. 1.32 2,16 7 in. 1,36 2,20 13 Inches. 5in. 1.48 2,41 1.52 2.48 7 in. 1.56 2.52 13 Inches. 5 in. 1.66 2.70 Gin. 1.70 2.74 1 74 2.78 14 Inches. 11 Inches. 5 i n . G in. 1 92 3.08 7in. 1.98 3 14 15 Inches. Gin. I 7 in. 1 Sin. 1 98 3.14 6 in. 2.42 3 82 7 in. I Sin. "2Tia"i 2.52 3.88 I 3.92 15 Inches. 2.63 4.1s Sin. I 9 in. 2.74 4.24 2 80 4.30 16 Inches. 2 98 4.64 Sin. 3.04 4,70 9in. 3.10 4 76 14 Inches. 6 in. 2.18 3.46 7in. 2.22 3,50 Sin. 2.28 3.56 15 Inches. Gin. 7in. Sin 2,40 3,76 2.44 3.80 2,50 3.86 16 Inches. 7 1 u j 8 in. 9 in 2.70 2.76 4.20 4,26 IT Inches. (in Sin. 9in 2.94 4.56 3,02 4,64 3,08 4 70 18 Inches. Sin 3.32 5.10 9 in. ) 10 in, 3,38 5,16 3.44 5.22 2,14 3 38 2,13 3.42 2,24 3.4ri 5i>'. I G in. j 7 in. j 1.12 1.90 1 16 1 94 1 20 1.98 13 Inches. 5 in. 1.26 2,10 6 in. 1.30 2.14 1.34 2,18 13 Inches. 5 in. G in. 1 44 2.36 1.48 2 40 7 in 1.52 i 2,44 ! 14 Inches. 5in. I 6in. 1.66 1,70 2.70 2.74 7 in. 1 74 2.78 15 Inches. 17 Inches. 5in. 1.84 2.96 Gin. 1.88 3.00 1.94 3.06 16 Inches. 16 Inches. Gin 2 12 3,36 7 in. 2,18 3.42 Sin. 2.23 3.46 17 Inches. Sin. I 7 in. | Sin. 2.34 3.66 2.40 3.72 2.44 3,76 6 in. 7 in, 8 in. j 2,38 3 74 2,44 3.80 2 50 3,86 17 Inches. I Sin. 2 70 4,16 2.76 4,22 9 in. 2,80 4,26 18 Inches. 7 in. 2 93 4.58 Bin. I 9: 3.02 4,64 4.70 19 Inches. Sin. I 9in. lOin 3.24 3.30 4.98 5.04 3 36 5.10 20 Inches. Sin. 9 in. 10 in. 3,56 5.46 3.62 5.52 3.70 5,60 18 Inches. 6 in. 2,52 4,08 7 in. I Sin. 2.58 4,14 2 ',2 4,18 19 Inches. 2.88 4.46 Sin. 2.94 4.52 9 in. 3.00 4.58 20 Inches. 7 in. 3 18 4,92 Sin. 3.24 4.98 9in. 3.30 5.04 21 Inches. Sin. 3.52 5.38 9 in. 3 58 5,44 10 in 3,54 5.50 Inches. Sin. 5.84 9 in. 3.88 5.90 10 in 3.96 5.98 2.04 3.24 2,C8 3.18 2.12 3.32 18 Inches. G in. I 7 in. | 8 ii 2.32 2.38 2,42 3 64 3,70 3,74 19 Inches. 2.54 3.96 7 in. 2.60 4.02 Sin. 2.64 4,06 20 Inches. 2.f,4 4.42 Sin. 2,90 4.48 9 in 2,94 4,52 21 Inches. 3.12 4.82 8 in. 9 in. 3.18 4,88 3.24 4.94 23 Inches. 7 in. 3.44 Sin. 3.50 9 in. 3.56 5.42 23 Inches. Sin. 3.76 5.'i4 9 in. 3.84 5.82 10 in 3.90 5,88 24 Inches. 8 in. 4.04 6.16 9 in. 4.10 6.22 10 in. 4.18 6,30 ' Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. THE KITTKEDGE COEJ^-ICE AXD OEXAMEXT COMrAiyY. 103 DESIGN No. 866. Note.- Face: Double Sunk. Sides: Plain, with Stamped Ornament. -This design is to be regarded as a type of a class. The follo^ving figures arc applicable to Brackets possessing the same general features of oruamentatiou. Patterns extra in all cases. See Introductory Xote, Page 27. Scale: % lnch= 1 foot DEPTH. 14 in. 16 in. 18 ia. 20 is. 22 in. 24 in. 23 in. 28 in. 30 in. 32 in. 35 in. Projection *5 Inches. Face Width . Cat and Fonnetl Complete Projection Face Wiflth . Cut and ionnca. Complete Projection Face Width. Cut and Formed Complete Projection Face Width. Cut and Formed Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and i^'ormed Complete Prelection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed . Complete . ; Projection Face Width . Cut and Formed, Complete Projection Face Width Cut and Formed , Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed. Complete . . 3 in. I 4 in. 5 in. ,90 1.40 1.42 .92 1.44 Inches. *6 Inches. 4 in. 5 in. Gin 1.10 1.7-2 1.12 1.74 1.16 1.78 *7 Inches. 4 in. 5 in. fi in 1 28 1.9j 1.30 1.98 1.34 2 02 ^8 Inches. 4 in. 5 in. 6 in 1.43 2.2i 1.48 2.26 1.52 2.30 ^9 Inches. 4 in. 5 in. 6 in 1,70 2.54 1.72 2.56 1.76 2.6U 10 Inches. 5 in. 6 in 1.98 3 06 2.02 3.10 2.03 3.14 11 Inches. in. Gin. 7in 2.24 3.40 2.23 3.44 2.32 3.48 12 Inches. 6 in 7 in. 2.53 3.86 2,62 3.92 2.55 3. 96 13 Inches. 1.04 1 .62 4 in. 1.05 1.64 5 in. 1.08 1.66 *8 Inches. 1.24 1.92 1.25 1.94 6 in. 1.30 1.98 "9 Inches. 1.46 2.24 5 in. 6 in. 1.48 2.26 1.52 2.30 10 Inches. 4 in. 1 74 2.68 5 in. 1.78 2.72 6in, 1.82 2.76 11 Inches. 1.92 2.96 5 in. 1.95 3.00 2.00 3 04 12 Inches. 5in. 6 in. 2.22 3.38 2.25 3.42 2.32 3.48 13 Inches. 6iu. I Gin. 2-50 3.76 2.54 3.b0 2.58 3.84 6i-L.. Tin. Sin 2.86 4.24 2.92 4.30 2.95 4.34 14 Inches. in. 7 in. Sin, 3.22 3.28 3,32 4.74 4.80 4.84 15 Inches. 14 Inches. 6in. 7in. Sin 2.88 4.26 2.92 4.30 2.98 4.36 15 Inches. 6in. 3.20 4.68 Sin. 3.30 4.78 16 Inches. Tin. Sin. Oin. 3.62 3.58 3.72 5.26 5.32 5.36 3.50 5.24 8in. 3.65 5.30 3 'iZ 5.b6 16 Inches. 4,04 5.84 8 'n. 4.10 5.90 9 in. 4.15 5 96 IT Inche£ 4 00 5.76 Sin. 4.0'd 5.84 9in. 4.14 5.90 18 Inches. Sin 4.54 6 48 9 in. 4.60 6.54 10 in. 4.66 6.60 *9 Inches. 1 22 1.86 I 6in. 1.25 1 .90 1.28 1 .92 10 Inches. 1.54 2.38 Oin. 1.55 2.40 7 in. 1 60 2.44 11 Inches. 1.72 2.62 6 in. 1.75 2.66 7 in. 1.80 2.70 12 Inches, 5 in. 1.96 3.00 2.00 3.04 7 in. 2.04 3.08 13 Inches. 2.20 3.32 Gin. 2.24 3. 36 7in. 2.28 3.40 14 Inches. 2.48 3.74 Oin, 2 52 2.53 3.78 3 84 15 Inches. 2.84 4 18 7 in. ! Sin. 2.83 4.22 2.94 4.28 16 Inches. Gin. I 7 in. 3.18 3.24. 4.66 4.72 8 in. 3 30 4.78 17 Inches. 3.52 5.22 3.68 5.28 9 in. 3.72 5.32 18 Inches. 7in. 4 02 5.78 Sin. 9 in 4.08 5.84 4.14 5.90 19 Inches. Sin. Oin. 4.52 6.42 lOin 4, 53 6. 48 IQ Inches. 8 in. I 9 in. 4.95 7.02 5.02 7.18 5.10 7.16 11 Inches. Oltl. T52" 2.36 1 56 2 40 1.60 2.44 12 Inches. 5 in. 6 in. j 7 in. 1.70 2.60 1.74 2.64 1.78 2.6? 13 Inches. 5 in. 1.92 2.92 6 in. 1.95 2.96 2. CO 11 3.00 j 14 Inches. Sin. Gin. 7 in 2.20 3.32 2.24 3.36 15 Inches. 5in. 2.44 3.66 Gin. 2.54 3.76 16 Inches. 2 82 4.16 7 in. 2.88 4.22 2.92 4.26 17 Inches. 6 in. "314" 4.58 Tin. I Sin. 3 20 4.64 3.24 4.68 18 Inches, 6 in. 3.54 3 50 I 3.54 5.14 5.20 5,24 19 Inches. 3.94 5.66 Sin. 4.00 5.72 9 in. 4.05 5.78 17 Inches. 20 Inches. 4.40 6.30 Sin. Oin 4.46 6.36 4.52 6 42 21 Inches. Sin. 9in. 4.92 6.94 4 98 7.00 5.04 7.06 J2 Inches. 5.42 7.62 Oin. 5.48 T.6S 10 in 5.55 7.76 2 '/4 4.04 2.^/S L. . 4.LS ! 4 1- 18 Inches. 6 in. 3.12 4 56 3.18 4.63 3 .22 4.66 19 Inches. 3.45 5.02 Tin 3.52 5.08 3.56 20 Inches. 3.90 5.62 3.95 5.68 Oin 4.00 21 Inches. 7in. 4,34 6.20 Sin. 4.40 6.26 9 in 4.45 6.32 22 Inches. 7in. Sin. | Oin. 4 84 6.86 4.90 6.92 4.95 6.98 23 Inches. Sin. Oin. 10 in 5.36 7.52 5.44 7.60 5.50 7.66 24 Inches. in. 9 in. 10 in 5 85 8.16 5.92 8.22 6.00 8.30 "Sizes marked with star are priced as Corbels; that l.s, without Top-Moulding. 104 THE KITTEEDGE CORKICE AKD OE^^AMEKT COMPANY. DESIGN No. 867. Face: Double Sunk. Sides: Sunk Panel. Note —This design Is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 2' Scale: 34 inch=ll'oot DEPTH. 14 in. 15 in. Projection Face Wi'lth Cut and Formed Complete 18 in. 20 in. 22 in. 24 in. 25 in. 23 in. 30 in. 32 in. 34 in. Projection Face Width. Cut and FormeU. Complete Projection Face Width Cut aud Formed. Complete Projection 5 Inches. 3 in. .72 1.4G 4 in. .74 1.48 5 in. .76 1.50 Inches. 8 in. .90 1 .16 4 in. .22 1.18 5 in. .94 1.80 ■^6 Inches. Face Width. Cut aud Formed Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. Cut and Formed Complete Projection Face Width. Cut aud Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. *^ut and Formed. Complete Projection Face Width 4in. 5in. .96 1.86 .98 l.bS 6 in. 1.02 1 92 *7 Inches. 4 in. 1 12 2. It) 5 in. 1.14 2.18 6 in. 1.18 2 22 ■^8 Inches. 4 in. 1.28 2.46 5 in. 1.30 2.48 Gin. 1.34 2.52 *9 Inches. 1.50 2.80 5in. 1 52 2.82 Bin. 10 Inches. 5 in. 1.66 3.06 6in. 1.70 3.10 7 in. 1.74 3.14 Cut and Formed. Complete Projection Face Width. 3C in. Cut and Formed. Complete 11 Inches. 5in. 1.88 3.40 6in. 1.92 3.44 7in. 1.96 3.48 12 Inches. 6 in. 2.16 3.84 Tin. 8in. 2.22 3.90 2.26 3.94 13 Inches. 2.36 4.16 Tin. 2.42 4.22 *8 Inches. 4in. 5in. 1 08 2.12 1.10 2.14 6in. 1.14 2.18 *9 Inches. 4in. 1.28 2.46 5 in. TTo" 2.48 Gin. 1.34 2.52 10 Inches. 4 in. 1,44 2.G8 5 m. 1.48 2.72 Gin, 1.52 2.76 11 Inches. 4in. 1 60 2.96 5 in. 6 in. 1.64 3.00 1.68 3 04 "9 Inches. 4 in I 5 in iToT 2 06 1.10 2.10 6 in. 1.12 2.12 10 Inches. 12 Inches. 5 in. 1.86 3.38 6 in. 1.90 3.42 7in 1.96 3.48 13 Inches. 5 in. 2.10 3.74 Bin. 2.14 3.16 Tin. 2.18 3.82 14 Inches. 6in. 2.38 4.18 7 in. 2.42 4.22 Sin. 2 48 4.28 15 Inches. 2.46 4.26 14 Inches. Projection Face Width Cut and Formed. Complete Gin. 2.64 4.60 7iu. 2,70 4.66 8in. 2,74 4,70 15 Inches. 7 in. 8 in. 9 in. 2.92 5.04 2,98 5.10 3 04 5.16 16 Inches. 7in. Sin. 9in 3 26 5.60 3,32 5,06 3,38 5,72 6in, 7in. 2.62 4.54 Sin. 2.72 4.64 16 Inches, 7in. Sin. 2 94 5.06 3 00 5.12 9 in 5in. Gin. 1.30 2,42 7 in. 1 34 2,46 11 Inches. 5in, 1.42 2.62 1.46 2.66 7 in. 1,50 2.70 12 Inches. 5in. 6in 7in. 1.64 1.68 1,72 3 00 3.04 3,08 13 Inches. 5in. 1,84 3,32 17 Inches. (in Sin. 9 in 3.22 5.52 3,30 5,60 3.36 5. 66 18 Inches. 8in. 9 in. 10 in 3.60 6 12 3 65 6,18 3.72 6.24 Gin. 1,88 3,36 7in, 1 92 3,40 14 Inches. 5in. bin. 7 in 2 08 3.72 2 12 2 18 3 82 11 Inches. 1,26 G in. I 7 in. 1 30 2,42 1 34 2 46 12 Inches. 5in. 1,40 2. GO _ 7in. 1.44 2,64 1.48 2.6s 13 Inches. 5 in. 1.60 2.92 Gil. 1.64 2.96 7 in 1.68 3.00 14 Inches. 5in. Gin. 1.84 3.32 1.88 3.36 1,S2 3,40 15 Inches. 5in. 2.04 3,64 Gin. 2,08 3,68 2,14 3 74 16 Inches. Gin 15 Inches. 6 in. 7 in. Sin. 2,34 4.10 2,38 4.14 2,44 4,20 2.32 4.08 7 in. 2.38 4.14 Sin. 2.42 4.18 16 Inches. Gin. 2.60 4.52 7in, 2,66 4,58 Sin. 2.72 4,64 17 Inches. 2,94 5,02 Sin. 3,00 5.08 9 in. 3.04 5.12 18 Inches. 7in. 3.24 5,54 Sin. 3 30 5,60 9 in 3.35 5,66 19 Inches. Sin. 9in. lOin 3.P2 3,58 364 6,00 6.06 6.12 20 Inches. Sin. I 9 in. 10 in .56 3 92 6.62 4,00 6.70 17 Inches. 2.56 4.44 7in. Sin. 2.62 4.50 2,66 4.54 18 Inches. 6 in. 2,85 4.94 7 in. I Sin. 2,92 5.00 2,96 5.04 19 Inches. 3,16 5.42 Sin. 3.22 5.48 9 in. T28 5,54 20 Inches. 17 Inches. 2,24 3,96 7 in. 2.32 4.04 18 Inches. Gin. 2,54 4.42 7 in. I 2,60 4,48 2 64 4.52 19 Inches. 6 in. 2.78 4,82 Tin. I Bin. 2,84 4,es 2,83 4 92 20 Inches. in. 3 12 5.38 Sin. 3.18 5.44 9in 3,22 5.48 21 Inches. 7in. Sin. 3.46 5,90 9 in. 3.52 5,96 7 in. 3.46 5,94 3,52 6,00 21 Inches. 3,82 6.48 9in. 3 88 6.54 lOin. 3, 94 6.60 22 Inches. Sin. 4.14 7.00 9 in. 4,20 7.06 10 in 4.28 7.14 22 Inches. 7in. 3 74 6.40 Sin. [ 9 in. 3,80 6,46 3 85 6,52 23 Inches. Sin. 4,08 6,90 9in. 4,15 6,98 10 in 4.22 7,04 24 Inches. Sin. 4.38 7,40 9 in. 4,44 7,46 lOin. 4,52 7.54 * Sizes marked with star are priced as Corbels ; that Is, without Top-Moulding. 105 DESIGN No. 868. Face: Double Sunk. Sides: Sunk ScroUed-Panel. N. B.— This Design is to be t-egardcd as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Pattekxs extra in all cases. See Introductory Note, page 27. 34 inch =1 foot. DEPTH. 14 in. *5 Inches. *7 Inches. *9 Inches, 11 Inches. Face Wi.Uh 3 in. 4in. Sin. 3 in. 4 in. Sin. 4 in. 1.03 2. 08 5 in. Bin. Sin. 6in. 7 in. Liut and. Formed.. . C^r\fY\ 111 ofo .74 1.5-2 .75 1.54 .78 1.56 .92 1 80 .94 1.82 .96 1.84 1.12 2.12 1 14 2.14 1.30 2.48 1.34 2.52 1 38 2.56 IC in. *6 Inches. *8 Inches. 10 Inches, 12 Inches. Face Width 4 in. 5 in. Bin. 4 in. 5 in. 6in. Sin. Bin. Tin. Sin, Bin, 7 in. cue and i uriutd. . .98 i.yu 1.00 1,92 1 04 1.96 1.10 2.14 1.12 2.16 1.16 2.20 1.32 2.50 1.34 2.52 1.38 2.56 1.46 2.T4 1.50 2.78 1.54 2.82 Project! Oil *7 Inches. *9 Inches. 11 Inches, 13 Inches, 13 in. 4 in. 5in. Bin. 4 in. 5 in . 6 in. Sin , Bin. 7 in . Sin, Bin. 7in. 1.V4 3.14 iJut and Formed. . Complete 1 14 2.18 1.16 2.20 1.20 2.24 1.23 2.46 1.30 2.4S 1.34 2.52 1.48 2.T6 I.b2 2.80 1.56 2.84 1.66 3.06 l.VO 3.10 20 in. Projection . *8 Inches. 10 Inches. 12 Inches. 14 Inches, Face Width 4 in. 5 in. 6 in. 4in, Sin. Bin. S in. Bin. Tin. Sin. Bin, 7 in . L;ut ana Formed. . Complete 1.28 2.46 1.30 2.48 1.34 2,52 1.50 2.82 1.54 2.86 1.58 2.90 1.70 3.14 1.74 3.18 1.78 3,22 1.90 3.46 194 3.50 1.98 3.54 22 in. Projection *9 Inches. 11 Inches. 13 Inches. 15 Inches, 17 Inches, Face Width 4 in. Sin. Bin. 4 in . Sin, Bin. S in , Bin, T in. Sin. 6in. 7 in. 5 in. 6 in. Tin. Cut and Jb'ormea. . Complete 1.52 2.82 1.54 2,84 1.58 2.88 1 63 3 10 1.70 3.14 1 74 3.18 1 90 3.46 1.94 3.50 1.98 3.54 2.10 3.T8 2.14 3.82 2.20 3.88 2.32 4.14 2.36 4.18 2 40 4.22 24 in. Projection 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. 6 in. Tin. 5 in. Bin, 7in. 5 in. Bin, Tin. 6in. 7 in. Sin. 6 in. 7 in. Sin. Cue ana i ormeil. . Complete 1.72 3.20 1.75 3.24 1.80 3.28 1.92 3.52 1.96 3,56 2.02 3.02 2.14 3.86 2.18 3.90 2.24 3.96 2.40 4.26 2.45 4.32 2.50 4.36 2.62 4. GO 2.68 4,66 2 72 4.70 26 in. Proj ection 11 Inches. 13 Inches. 15 Inches, 17 Inches. 19 Inches. b ace VV idth 5 in. 6in. Tin. 5 in. Bin. Tin. Bin, 2.42 4.28 Tin, Sin. i 6in. 7 in. Sin. 6 in. 7 in Sin, Cut and Formed. . Complete 1.94 3.54 1.98 3.58 2.02 3.62 2.16 3.8S 2.20 3.92 2.24 3.96 2.46 4.32 2.52 4.38 2 64 4.62 2.70 4.68 2.74 4.72 2 86 5.00 2.92 5.06 2 95 5.10 28 in. Projection 12 Inches. 1 14 Inches, 16 Inches, 18 Inches. 20 Inches. Face Width 6 in. T in . 8in. Bin, T in. Sin. B in. 4.70 Tin. Sin. Bin. 7in. Sin, 7 in. Sin. 9in, Cut ana Formed . . Complete 2.22 3.93 2.28 4.04 2.32 4.08 2.45 4.36 2.50 4.40 2.56 4.46 2.74 4.T6 2.80 4.82 2 94 5.12 3.00 5.18 3 04 5 22 3.18 5.52 3.24 S.5S 3.28 S.62 30 in. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. Tin. 8in. Bin. T in. 8 in. T in. Sin. 9in. Tin, Sin. 9in, 7 in. Sin. 9iTi. cut ana i^'ormed. . 2.44 4.34 2.50 4.40 2.54 4.44 2.70 4.T2 2.74 4.T6 2.80 4.82 3,02 5.20 3.08 5.26 3,12 5.30 3.22 5.56 3,28 5.62 3.34 5.68 3.50 6.02 3.56 G.08 3.62 6.14 33 in. 14 Inches. 16 Inches. 18 Inches, 20 Inches, 22 Inches. Face Width 6in. Tin. Sin. T in. 8 in. 9in. T in. Sin. 9 in. Tin, Sin, 9 in. Tin. Sin. 9 in. Cut and Formed. . Complete 2.72 4.78 2.78 4.84 2 82 4.88 3.02 5.24 3.08 5.30 3.12 S.34 3,30 5.68 3.35 5.74 3.42 5.80 3.56 6.12 3.62 6.18 3.68 6.24 3.84 6.58 3 90 6.04 3.96 6. TO 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches, 23 Inches. Face W idth Tin. 8 in. 9 in. 7 in. Sin. 9 in. Sin, 9 in. lOin. Sin. 9 in. 10 in. Sin. 9 in. 10 in. Cut and i' ormeel. . Complete 3.00 5.22 3.05 5.28 3.12 5.34 3.28 5.6(j 3.36 S.T4 3.42 S.SO 3.62 6.18 3.68 6.24 3.74 6.30 3 92 6.66 3.98 6.72 4.04 6.78 4,18 T.IO 4 26 7.18 4.32 T.24 35 in. 16 Inches. 18 Inches, 20 Inches, 22 Inches. 24 Inches. Face Width Tin. Sin, 9 in. 8 in. 9 in. lOin. Sin, 9 in. 10 in. Sin. 9 in. 10 in. Sin, 9 in. 10 in. Cue and J^ ormca. . 3.32 5.T4 3 33 5.80 3.44 5.86 3.70 6.30 3.76 6.36 3.82 6 42 3.95 B.T4 4.02 6.80 4.10 6.83 4.24 T.20 4.30 T.26 4.38 7.34 4.48 T.GO 4.54 7.66 4.62 T.T4 Sizes marked with a star are priced as Corbels; that is, without Top-Moulding. lOG THE KITTEJ^DGE COllXICE AI'J'D OllXAMEJ^T COMPANY. ^ DESIGN No. 869. Face: Double Sunk. Sides : Sunk Scrolled-Pauel with Stamped Ornament. XOTE.— This design is to be rc2:ai'dcd as a type of a class. The followin,? figrures arc applicable to all IJrackets possessing tlie same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. )t. I- — X - Scale: }i in ch= 1 1 DEPTH. 14 ia. *5 Inches, "•''T Inches. ■^9 Inches. 11 Inches. li'ico 1(1 til 1 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 4 in 5 ir. ! G in. Sin. 6 in, 7 in. uut and t'oruicd Complete .84 1.64 .86 1 GG .83 l.(:8 1 06 1.96 1.03 1.98 1.10 1 2.00 i 1.23 2 30 1.30 1 1.32 ! 2.34 ! 2 315 1.C2 2.86 1 55 2.90 1 70 1 2.94 IGin. *6 Inches. *S Inches. 10 Inches. 12 Inches. 4 in. 5 in. Gin. 4in. 5 in. Gin. 5 in. G in. 7 in. Sin. 6in, 7 i^. Cut and Jbormeu 1.12 2.00 i.:4 2.08 1.18 2 12 1 28 2.36 1.30 2.38 1.34 2.42 1.64 2.88 1.66 2.90 1,70 2.94 1.80 3.14 1.84 3.18 1.88 3.22 13 h. Projection "7 Inches. "9 Inches. 11 Inches. 13 Inches. Face Width 4 in. 5 in. () in. 4 in. 5 in. 6 in. 5in. Gin. 7 in. Sin, 6 in. 7 in Cut and Formed Complete 1 32 2.40 1.34 2.42 1.38 2 46 1.50 2.G8 1.52 2.74 1.56 2.78 1.82 3 16 1.86 3.20 1.92 3.24 2.02 3.S) 2.05 3.54 2.10 3.58 23 in. *8 Inches. 10 Inches. 12 Inches. 14 Inches, Face Width 4 in. 5 in. Gin. 4 in 5 in. 6 in. Sir. Gin 7 in. 5 in. Gin. 7 i n . ! 1 Cut and i' ormtd Complete 1.50 2.72 1.52 2.74 153 2.78 1 84 3.22 1.88 3.2G 1.S2 3.30 2. 06 3 58 2.10 3.62 2.14 3. 66 2.30 3.96 2 24 4.00 2.38 4.04 22 in. *9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face AYidth 4 in. Sin. Gin. 4in. 5 in. 6 in. 5 in. 6 in. 7in, Sin, Gin. 7 in. 5 in. Gin, 7 in. Cut ana Formed Complete 1.73 3.12 1 80 3.14 1.84 3.22 2.02 3.54 2.06 3.58 2.10 3 G! 2.30 3.96 2.34 4.00 2.38 4.04 2 S6 4.34 2.30 4.38 2.66 4.44 2 84 4.78 2.88 4.82 i 2 92 1 24 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches, Face Widtli 5 in. Bin. 7 in. Sin. Gin. 7 in Sin. 6 in. 7in. 6in 7 in. Sin. 6 in. 7 in. 1 Sin, *^ut and ±'ormea Complete 2.08 3.64 2.12 3.G8 2.16 3.72 2.32 4.02 2.36 4.06 2.42 4.12 2.60 4.42 2.54 4.46 2.70 4 52 2.92 4.90 2.98 4.96 3.02 5.00 3,22 5.32 3.28 5.38 3.J2 5 42 23 in. 11 Inches, 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width Sin. 1 Gin, 7 in. 5 in. Gin. 7 in. 6 in. 7 in, 1 Sin. 6 in. 7 in. Sin. 5.44 Gin. 7 in. Sin. cut and Formed Complete 2.34 4.04 2.38 4.08 2.42 4.12 2 62 4.44 2.66 4.45 2.70 4.52 2.94 4.92 2.98 4.96 3.04 5.02 3.24 5.34 3.30 5.40 3.54 5.82 3.60 5.!-S 3.64 5.92 23 in. 12 Inches. l-i Inches. 16 Inches. 18 Inches. 20 Inches, Face Width Gin. 7in. Sin. 6 in. 7 in. Sin. Xos" 5.10 Gin. 7 in. Sin. 6 in. 7 in. Sin, 7 in. Sin. 9 in v...ut and Formea Complete i 2.53 4.54 2.74 4. GO 2 73 4(54 2.98 5 00 3.02 5.04 3.28 5.42 3.34 5.48 3 40 5.54 3.62 5.94 3.68 G.OO 1 3.72 1 6.04 3.94 6.42 4.00 6.48 4.04 6.52 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches, Face Width 1 Gi... Tin. Sin. 6 in. 7in, Sin. 7 in. 8 in. 9 in. 7 m. Sin. 9 in. j 7 in. Sin, 9 in Complete i 2.96 4 98 3.02 5 04 3.06 5.08 3 30 5.44 3.34 5.48 3.40 5.54 3.70 6.02 3. 76 6.08 3.80 6.12 3.98 6.46 4.04 6.52 4.10 6.. 58 i 4.36 1 7.01 4.42 7.10 4.48 7.16 32 in. 14 Inches. 16 Inches 18 Inches. 20 Inches. ! 22 Inches. Face Width 6 in. 7 in. Sin, 7 in l.^o~ G.OG Sin. T76^ 6.12 9 in. 7 in. Sin. 9 in. 7 in. Sin. 9 in. 1 7 in. Sin, 1 9in. Cut and Formed Complete i 3.32 5.50 3.38 5.56 3.42 5.70 3.80 G.16 4.06 G.CS 4.12 6.64 4.18 6.70 4.42 7.14 4. 48 7.20 4.54 7.26 4.80 7.70 4.86 7.7G 4.92 7.82 34 in. 1 1 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width i 7 in. Sin. Din. 7in Sin. 9in. Sin. 9 in. lOin Sin, 9in. lOin. Sin. 9in. 10 in Cut and Formed 1 3.68 3.74 6.10 3 80 6.16 4, 04 6.56 4.12 6.64 T.Ts" 6.70 4.48 7.20 4.54 G.26 4.60 7.32 4.88 7.78 4 94 7.84 5.00 7.90 5.24 8 34 5 32 8.42 5.38 8.48 35 in. Projection IG Inches. IS Inches. 20 Inches, 22 Inches. 24 Inches. Face Width ; 7 in. rioT , G.64 1 8in. 4.14 G.70 9 in. Sin 9 in. lOin Sin. 9 in. 10 ii>. Sin. 9 in. lOin Sin. 9in. lOin. Cut and Formed 4.20 6 76 4.56 7.32 1 4.62 7.68 4.68 . 7.44 j 4.92 7.86 4.98 7.92 5.06 8.00 5.30 8.44 5.36 8.50 5.44 8.58 5,66 8.96 5.72 9.02 5.80 9 10 * Sizes marked with star are priced as Corbels; that is, without Top-Moulding, THE KITTIiEDGE CORXICE AXD ORXAMEXT COMPAXY. DESIGN No. 870. Face: Double Sunk. Sides: Inci;ed. XoTE.— This design is to be rcRarded a"? a type of a class. The following? figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, Page 27. Scale: H inch= 1 foot. Hin. 16 in. 13 in. 23 in. 24 in. 25 in. 23 in. 30 in. 32 in. 34 in. 33 in. 22 in. Fare \Vi''th ! 4 in. 5 i n . 1 8 i n . 4 i u . 1 5 i n Gin. 5 in 6 in. 7iTi. Sin. 6 in. 7 in. 5 in. Gin. 7i". cut anil >'uinie«.l 1 56 1 68 3.04 1.72 3 08 , 3 . to k! OS 3 90 2.10 ! 2.30 3 94 ii 4 .3! li 2.34 4.30 2 38 4.40 ! 2 54 i 4.72 2.53 4.70 2.64 4.82 2. to 5.10 2.84 5.20 S.bd 5.21 Projection 5 Inches, Inches. ^■9 Inches. 11 Inches. Fnre Wi''th (Jut antl i'uruietl Complete 1.70 4 in. j 5 in. j' 3 in. 1.72 1 C4 1 .98 4 in. 1.06 2.( 0 5 in. 1.08 2 02 Projection j -6 Inches. *S Inches. Face Width. Cut and Formed. . 4 i n . 5 i n . Gin. li 1-10 i 2.08 1.12 2.10 1.15 2 14 4i ■. ! f^in. 1 22 2 32 1,24 2.34 1 Z8 2.38 Projection Inches. ^9 Inches. i 4 in 5 in. 1 6 in. 1 51". | Oin. 7 in. 1X20" 2 20 1.24 2.30 1.25 2.32 l.bS 3.08 1.62 3 12 1 66 3.16 10 Inches. 12 Inches. ' 5in. 6in. 7 in. 5in. 6in. 7in. 1.60 1 3.10 1.62 3 12 1 65 3 16 1 ?8 3.42 1.82 3.40 1.86 3 50 11 Inches. 13 Inches. .1 I Face "Width. . 4 in. I 5i (Jut and Formed. Complete .1; 1.26 ]; 2.36 1.28 2.38 6 in. ! 4in. 1 32- 1-44 2 42 [' 2.08 5 in. 1 46 2.70 in. ;! 5in. 1.50 ^ l.BO 2 .74 !; 3 44 6in. .48 7 in. 1] 5in. j 6 in. 1.88 3.52 Projection *8 Inches. 10 Inches. 13 Inches. 2.02 3.82 2.06 3.86 7 in 2.10 3.9) 14 Inches. Face Width. in. 5 in. Cut and i'ormtd Complete 1.44 2.08 1.46 2.70 l.uO 2,74 4 i n 5 i Ji . 6 in. ! 5iTi. Oin 7in. j 5in. Oin. 7 in. 1 1.82 3.&0 1 86 3 14 1.90 3.58 1 2.06 ! 3 90 2.10 3.94 2.14 II 2.30 3.98 ! 4.32 2 34 4.36 2.38 N 4.4J il Projection l| "^9 Inches. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Projection 10 Inches. 12 Inches. 14 Inches. 16 Inches. Face Wid^-h. 5 in. «.>utaiul i)'oruieLt ■ 2.03 Comidete | 3.9() Bin. I 7: 2.12 2.15 ,i 2.32 4 00 4.01 ;! 4.38 2.36 4.42 2.43 2.!38 4.48 I 4.80 2.62 4.84 7in. 2.68 Projection 11 Inches. 13 Inches. F.'ice Width.... cut and Formed !] 2 34 Complete : 4.40 Oin. 2.38 4.44 7in. ll 5jn. 2.42 i: 2.60 4.48 ll 4.82 6i". 2,64 4.!:6 2.68 4.90 Projection 12 Inches. 14 Inches. Face Width 1 1 Oin. uut and Formed |i 2.56 Complete \\ 4.92 7in. 2.72 4.98 8 in. 2 76 5.02 Projection 13 Inches. Face Width. cue and Formed. Complete Projection Face Width Cut aud Formed . Complete Projection Face Width . Cut aud Formed. Complete ..... . . 2.92 5.36 Tin. 2.98 5.42 2.94 5.38 7 in. 2.98 5 42 3,04 5.48 0 in 7 in. Sin. G in. 7 in. Sin. 2.88 5.28 2.94 5.34 2.98 5.38 3.12 5 e8 3.18 5.74 3.22 5.78 15 Inches. 6in. 2.90 5 30 7 in. ! 8in. 2.94 j 3.00 5.34 5.40 17 Inches 18 Inches. 19 Inches. 0in. 7in. Sin- G in. 7in. Sin. 3.14 5.70 3 20 5.76 3.24 I 5.80 \ 3 38 6.14 3.44 6.20 3.48 0.24 15 Inches. 6in. 3.02 i! 3.20 5.46 I 5.80 7 in. 3.24 5. 84 3.30 5.90 14 Inches. 16 Inches. 6 in. 7 in. Sin. 7 n\. Sin. Oin. 3.22 5.86 3.28 5.92 3.32 5.96 3.54 6.38 3.50 6 44 3.54 6.48 15 Inches. 3 52 6.36 3.58 6.42 3 54 6.48 Projection 16 Inches. Face Width ,|! 7in. I Sin Cutand Formed i 3.88 Complete 6.96 3.94 7.02 Oin. 4,00 17 Inches. 3.84 6 88 3.92 6.06 Oin 3.98 7.02 18 Inches. 4.28 7 58 Oin. 4.34 7.04 lOin 4.40 7.70 16 Inches. 18 Inches. 20 Inches. 6in. I 7in. I Sin, j _6 3.13 5. 7-8 3.24 5.84 3 30 i 3.45 5.90 li 6.26 7 in. I Sin, !| 7 in. 3.52 3,55 :| 3.74 6.32 6.36 6.74 Sin. 3.80 6.80 9 in 3.84 6.84 17 Inches. 19 Inches. in. j 8 in. 3.54 6.34 3.50 6.40 0 in. 7 in. | Sin. I W.64 II 3.78 I 3.84 6.41 6.78 I 6.84 21 Inches. 3.90 6.90 18 Inches. 3.86 6.90 3.92 6.90 9 in 3 98 7.02 19 Inches. Sin. Oin. lOin 4,20 7.46 4.26 6.52 4.32 7.58 20 Inches. 4,58 S.IO Oin. lOin 4.64 8.10 4 72 8.24 20 Inches. 7 in. 4.14 7.40 Sin. Oin. 4.20 4.26 7 46 7 . .52 7 in. 8in. 0 in. 4.08 4.14 7.30 4 20 7.42 !2 Inches. 21 Inches. Sin. Oin. 4.54 8.02 4 60 8.10 4.55 8.14 22 Inches. 7in. 4.46 7.04 Sin. 4.52 8.00 Oin 4.58 8.06 23 Inches. I Sin. I Oin. 4.86 4.94 8.56 8.64 lOin 5.00 8.70 24 Inches. Sin. 4,92 8.00 Oin. 4.98 8.72 li 8 in. I Oin. I 10 i 5.C6 I 5.22 8.80 9 10 5 28 9 .22 5.36 9 30 * Sizes marked with star are priced as Corbels ; that is, without Top-Moulding. 103 THE KITTREDGE CORKICE AKD ORKAMEKT COMPAJy^Y. DESIGN No. 871. Face: Plain, with Leaf and Spun Roll Sides; Plain, with Stamped Ornament. N B —This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. Scale : H Inch = 1 foot . DEPTn. 16 in. Projection Face Wiath. i^ut und I'^ormeu- Complete IS in. 20 in. 22 in. 24 in. 25 In. 23 in. Projection Face Width. cut and FormeU Complete Projection Face Width Cut and i'ormtju , Complete Projection Face Width. cut and Formed. Complete Projection Face Width. Cut and Formed. , Complete 10 Inches. Projection Face Width . Cut and Formed. Complete Projection Face Width. cut and Formed. Complete 30 in. 32 in. 34 in. 3G in. Projection Face Width. cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed. Complete 5 in. Projection Face Width cut and J?'oruiea. Complete 33 in. Projection 2 16 2.()4 2.28 2 76 Tin. 2.40 2.88 11 Inches. 5 in. 2.42 2.% 2 54 3.08 7 in. 2.66 3.20 13 Inches. 6 in. 2.78 3.38 Tin . I 8 in. ■ 3 "08 3. OS 2.94 3.54 13 Inches. 7 in, 3.24 Z.tS Sin. 3.38 4.02 14 Inches. 6 in. 3.42 4.14 7 in, 3 58 4.30 10 Inches. Sin. 3 74 4.46 15 Inches. 7in. 3 98 4.73 Sin. 4.14 4.94 4.32 5.12 16 Inches. 7 in . 4.40 5.28 Sin. 4.60 5.48 9in. 4.78 5.e6 17 Inches. Face Width. iin. Cut and Jj'ormed.. | 5 00 Complete .98 9in. lOin 5.20 6.18 5.40 6 oS 4 in. 1.82 2.24 5 in, 1.94 2.36 6 in 2. 06 2.48 11 Inches. 4 in. 2 06 2.54 5 in. 2.18 2.C6 2.30 2.78 12 Inches. 5 in. 2.40 2.ii4 6 in. 2.52 3.06 7 in. 2.66 3.20 13 Inches. 5 in. 2 68 3.28 2 80 3.40 7 in. 2. 94 0.54 14 Inches. 6 in. I 7in. 3.10 3 24 3.74 3.88 8 in. 3.40 4.04 15 Inches. 6in. 3.44 4.16 7in. 3.58 4.30 Sin, 3.76 4.48 10 Inches. 5 in. 1.72 2.12 1 82 2.22 11 Inches. 5 in , 1.92 2.34 2.04 2.46 7 in. 2 18 2.60 12 Inches. 5 in. 2.18 2.66 2 30 2.78 7 in. 2.42 2.90 13 Inches. 5 in. 2 42 2.96 2.54 3.08 7 in. 2.66 3.20 14 Inches. 5 in . 2.66 3.26 6 in. 2.78 3.38 7 in. 2.94 3.54 15 Inches. 6 in. 7in. Sin, 3.10 3.74 3.24 3. 88 3.40 4.04 16 Inches. 6 in. 16 Inches. 7 in. 4.00 4. SO Sin. 4.16 4.96 9in. 4.32 5.12 17 Inches. 7 in. I Sin. 4.62 5.50 4.40 5.28 9in. 4.80 5.68 18 Inches. 9 in. 5.26 6.24 lOin, 5.44 0.42 19 Inches. 8in. 5 50 6 58 9 in 10 in 5.90 6.98 3.42 4.14 7 in. 3.58 4.30 12 Inches. 1.90 2.32 Oin. 2.02 2 44 7 in , 2.16 2.58 13 Inches. 5 in. 2.14 2.62 6in. 7 in. 2 38 14 Inches. 5 in. 2.42 2.54 3.08 2.66 3.20 15 Inches. 5 in, 2.66 3.26 2.78 3. 38 7 in. 2.94 3.54 16 Inches. 6 in. 3.08 3.72 7 in. 3.24 Sin. 17 Inches. 6 in. 3.76 4.48 17 Inches. 7 in. 4.00 4.80 Sin. 4.16 4.96 4.32 5.12 18 Inches. 7 in. 4.42 5.30 Sin. 4.62 5.50 9in. 4.80 5.68 19 Inches. Sin. M)in. 5.02 5.22 6.00 6.20 lOin 5.40 20 Inches. Sin. 5.52 6.60 9 in, 5.70 6.78 lOin 5.92 7.00 21 Inches. Sin. 6 00 7.18 6.20 10 in 5.40 7.58 3.42 4.14 7 in. 3.58 4.30 3.74 4.46 18 Inches. 3.83 4.62 7in. 3.98 4.78 4.12 4.92 19 Inches. 7 in. 4.38 5.26 4.58 5.46 4.76 5.64 20 Inches. 7 in. 4,84 5.62 5.02 6.00 Oin. 5 22 6.20 21 Inches. Sin. 5.52 6.60 5.70 6.78 lOin 17 Inches. 5 in. 2.96 3.60 in. 7 in. 3.08 3.72 3.22 3.86 18 Inches. in. 7 in. 3.40 4 12 3.56 4.28 3.72 4 44 19 Inches. 6 in. 7 in. 3,78 3.94 4.58 4.74 4.08 4.88 20 Inches. 5.90 6. 98 22 Inches. Sin, 6.00 7.18 9in. 6.20 7.38 lOi 6.40 7.58 23 Inches. S in. 7.78 9in, LOin 6.96 8.20 7in. 4.34 5.22 4.54 5.42 9 in. 4.70 5.58 21 Inches. 7in. Sin. Oin 4.82 5.80 5.00 5.98 5.20 6.18 22 Inches. 7 in . 5.30 6. 38 in. 9in, 5.50 6.58 5.68 6.76 23 Inches. Sin. 5.98 7.16 9 in. lOin 6.20 7.38 6.38 7.56 24 Inches. n. 9in. lOin 6.54 7.78 6.72 7.96 .18 25 Inches. 8in. 9in, 7.10 8.44 7.::2 8.06 lOin 7.54 8.88 THE IvITTREDGE COllXICE AKD ORKAMEKT COMPANY. 109 DESIGN No. 872. Face: Plain, with Leaf and Spun Roll. Sides: Sunk Panel. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Kote, page 27. Scale : H inch = 1 foot. DEPTH. 16 in. || 10 Inches. 12 Inches. | ! i i| 5in. 1 6 in 7in. 5 in . 1 Gin. 7in. Cut and Formed. . Complete ! 1 46 2.14 1.56 2.24 1.70 2.38 1.60 2.32 1 1.72 2 44 1.85 2.58 13 in. 11 Inches. 13 Inches. 5 in . fiin . 7in. 5 in. 6 in. 7 in. 1 Cut and Formed . . Complete 1.52 2.34 1.74 2.46 1.88 2.60 1.82 2.62 1.94 2.74 2.05 2.86 20 in. 10 Inches. 12 Inches. 14 Inches. 4 in . 5 in . 6 in . 5 in. Oin. 7 in. 5 in . 6 in. 7 in , Cut and Formed . . Complete 1.52 2.24 1.64 2.36 1.75 2.48 1.85 2.66 1.98 2.78 2.10 2.90 2.05 2.96 2.13 3.08 2.30 3.20 22 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches, 4 in. Sin. 6 in 5 in. 6in. 7 in. 5 in. 6in. 7 in. Sin. 6in. 7in. Lilt and FoimeU. . Complete 1 74 2.54 1.85 2.66 1.98 2.78 2 06 2.96 2.18 3.08 2.30 3,20 2.25 3.24 2.38 3 36 2.54 3.52 2 45 3.52 2.58 3.64 2.72 3.78 2i in. 10 Inches. 13 Inches. 14 Inches. 16 Inches. 18 Inches, Wrte^c W i f It h i 5 in . 6in. 7in . 5 in . 6in. 7 in . Sin. Oin. 7 in. 6 in. 7 in. Sin. 6 in. 7in. 8 in. ~3ir 4 30 Cut and Formed. . Complete 1 84 2.()4 1.95 2 76 2 OS 2.88 2.04 2.i>4 2 15 3 06 2.30 3.20 2 26 3.24 2.38 3.36 2.54 3 52 2.58 3 64 2.74 3.80 2.88 8.94 2.82 3,98 2.98 4.14 26 In. 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 5 in. 6in. 7 in. 5in. 6in. 7 in . 6 in. 7 in. Sin . 6in. 7in. Sin. 6in. 7 in. Sin. Cut and Formed. . Complete 2.06 2.96 2 IS 3,08 2 30 3.20 1 2 28 3.26 2 40 3.38 2 54 3.52 2.60 3.66 2.74 3.80 2.90 3 96 2.84 4.00 3.00 4.16 3.16 4.32 3 10 4.38 3.26 4.54 3.40 4.68 23 in. 12 Inches, 14 Inches. 16 Inches. 18 Inches. 20 Inches. r tice w lULii 6 in. Tin. 8 in. 6in. 7in. Sin. Oin. 7 in. Sin. 6in. 7 in. Sin. 7in. Sin. Oin. out and Formed. . Complete 2 38 3.36 2. 54 3 52 2 63 3 66 2.60 3.66 2 74 3.80 2 90 3.96 2.84 4.00 3.00 4.16 3.18 4.34 3.14 4.42 3.30 4.58 3.44 4.72 3.56 4.98 3.76 5.18 3.92 5.34 30 in. 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches. Bin. 7 in. Sin. 6 in . 7in. Sin. 7in. Sin. Oin. 7in. Sin. 9ir . 7 in. Sin. Oin. Cut and Formed. . Complete 2.58 3.64 2.74 3.80 2.83 3.94 2.B6 4.02 3.00 4.16 3.18 4.34 3.32 4.60 3.48 4.76 3 54 4.92 3.60 5.02 3.80 5.22 3.98 5.40 3.88 5.44 4.05 5 62 4.25 5.82 32 in. 14 Inches. 16 Inches. 18 Inches. 20 Inches. 22 Inches, r ace vv Kiru 6 in. 7 in . Sin. 7 in. Sin. 9 in. 7in. Sin. 9in. 7 in. Sin. Oin. 7 in. Sin. 9 in. Cut and Formed. . 2.84 4.00 3 00 4.16 3 15 4.32 3.32 4.60 3.48 4.76 3.64 4.92 3.64 5.06 3.84 5.26 4.02 5.44 S 90 5.46 4.08 5.64 4 .28 5.84 4.20 5.92 4.40 6.12 4.58 6.30 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face Width 7 in. Sin. 9in. 3.64 4.92 7 in. Sin, 9in. Sin. Oin. lOin. Sin. Oin. 10 in Sin. Oin. lOin. Cut and Formed. . Complete 3.30 4.58 3.45 4.74 3.52 5.04 3.84 5.26 4.02 5.44 4.08 5.64 4.28 5.64 4.46 6.02 4.42 6.14 4.50 6.32 4.80 6.52 4.70 6.54 4.92 6.76 5.10 6.94 35 in. 16 Inches. 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face "Width 'Tin. 8 in . 9 in. 1 Sin. 9in. 10 in. Sin. Oin. lOin. Sin. 9in. 10 in. Sin. Oin. lOin Cut and Formed. . Complete 3 52 5.04 3 £2 5 24 4.00 5.42 4.12 5.68 4.32 5.88 4.50 6.06 4.42 6.14 4.60 6.32 4.82 6.54 4.72 6.56 4.92 6.76 5.12 6.96 5.06 7.02 5.24 7.20 5.45 7.42 33 in. 17 Inches. 19 Inches. 21 Inches. 23 Inches. 25 Inches, Face Width, Sin. 9in. 10 in. Sin. 1 9 in , lOin. Sin. Oin. 10 in. Sin. Oin. lOin. 8 in. 9 in. 10 in. Cut and Formed.. 4.05 5 62 4.25 5.82 4.45 6.02 4.40 6 12 4.50 6.32 4.80 6.52 4 72 6.56 4.92 6.76 5.12 6.96 5.05 7.02 5 25 7 22 5.48 7.44 5.40 7.50 5.62 7.72 5.84 7.94 110 THE KITTREDGE COllXICE A^5"D OMs'AMEXT COMPAiN"Y. DESIGN No. 873. Face: Plain, with Leaf and Spun Roll. Sides: Sunk Scroiled-Fanel with Stamped Ornament. N B —This Desljm is to be regarded as a type of a class. The follovving figures are applicable ' ' to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Kote, page 27. It" IB m Scale : 14 Inch = 1 foot. DEPTH. IC in. 18 in. 20 in. 22 in. 24 in. 2G In. 23 in. 30 in. 32 in. 34 in. Projection Face Wi'Uh. cut and f' oriuea Complete Projection Face Width. out and Jb'ormed Complete Projection Face Width. Cut and a oruieu . Complete Projection Face Width cut and Formed Complete Projection Face Width, cut and Formed. . Complete Projection Face Width 10 Inches. 5 in. 2 26 3.22 6in. 2.38 3 34 2 50 3.4C .1 Inches. 5 in. cut and J? ormed. Complete Projection Face Width. cut and Formed. Complete Projection Face Width cut and Formed. Complete Projection 2.52 3. GO 2 64 3.72 2.76 3.84 12 Inches. 6in. 2.90 4.06 Tin 3.06 4.22 3 20 4.36 Face Width Cut and Formed. Complete Projection 13 Inches. in. 7in. 3 18 4.48 3.34 4.62 Sin. 3.48 4.76 14 Inches. H in , 3.52 7in. 3 68 5. 06 Sin. 3 84 5.22 15 Inches. Face Width 7 in. Sin. 9 in Cut and Formed. Comple*^e 35 in. 33 in. Projection Face Width cut and formed. Complete Projection Pace Width Cut and * ormed. Complete 4 06 5.58 4 22 5.74 4.40 5.92 16 Inches. 7 in. 4.44 6.08 S in . 4.64 6.28 9in. 10 Inches. 5 in . 1 82 2.62 6 in 1.92 2.72 2.06 2.86 11 Inches. 4.82 6.46 17 Inches. 8in, 5.02 6.82 5.22 7.02 10 in 10 Inches. 4 in. 1.92 2.78 5 in 2.04 2.90 6 in 2.16 3.02 11 Inches. 4 in. 5 in . 6 in 2.16 1X28" 2.40 3.12 3.24 3.36 12 Inches 2.50 3.58 2.62 3.70 2.76 3.84 13 Inches. 2 80 3.96 6 in, 2 92 4.08 7 in. 3.06 4.22 14 Inches. 3.20 4.48 7in, 3.34 4.62 Sin, 3 50 4.78 15 Inches. 5.42 7 22 6in. 4.92 7 in. 3.68 5.06 Sin 3.85 5.24 2.02 2.88 6 in. 2.14 3.00 7in. 2 28 3.14 12 Inches. 5 in. 2.28 3.24 6 in 3.40 3.36 7 in. 2.52 3.48 16 Inches. 7 in. 4.08 5.60 4.24 5.76 4 40 5.92 17 Inches, 7 in, in. 9in, 4.44 4.66 4.84 6.08 6.30 6.48 18 Inches. Sin. 5.08 6.88 9 in. 5.28 7.08 10 in. 5.46 7.26 19 Inches. 8 in. 5.46 7 42 9 in. 5.55 7.62 10 in 5.85 7.82 13 Inches. Sin. 6iu. I 7 2.52 3.66 2.64 3.72 2.75 3.84 14 Inches. 5 in 2.78 3.94 6 in. 2.90 4.06 7 in. 3.05 4.22 15 Inches. 6 in 3.20 4.48 7in, 3.34 4.62 3.50 4.78 16 Inches. 12 Inches. 5in, 2. CO 2.86 2.25 3.12 13 Inches. 5 in. 2 24 3.20 2.35 3.32 7 in , 3.44 Gin. 3.52 4.90 7 in. Sin. 3.86 5.24 17 Inches. 7in. 4.08 5.60 9in. 4.40 5.92 18 Inches. Sin. 4.66 6.30 4.84 6 48 19 Inches. Sin. 9 in. 10 in 5.04 6.84 5.24 7.04 5.42 7.22 20 Inches. 5.48 7.44 9in. 5.65 7.62 lOin. 5.88 7.84 21 Inches. Sin. 5.88 8.00 9 in. 6.08 8.20 10 in 6.28 8.40 14 Inches. 2.64 3.72 7 in. 11 2.75 3.84 15 Inches. 5 in. 2.78 3.94 2.90 4.06 7 in. 4.22 16 Inches. 6 in. I 7: 3.18 4 46 3.34 4.62 Sin. 3.48 4.76 17 Inches. 3.52 4.90 7 in. 3.58 5.06 3.84 5.22 18 Inches. 6in. 3.90 5.42 7in. 4.06 5.58 4.20 5.72 19 Inches. 7 in. 4.42 6.06 Sin. 4.62 6.26 4.80 6.44 20 Inches. 7 in. 4.85 6.66 5.04 6.84 21 Inches. Sin. 5.48 7.44 9in. 5.65 7.62 10 ir, 5.f6 7.82 22 Inches. Sin. 5.88 8.00 9in. 6.03 8.20 10 in. 6. 28 8.40 23 Inches. Sin. 6.34 8.58 9 in. 6 54 8.78 10 in 6.75 9.00 17 Inches. 5 in , 3 05 4.34 6 in. 3.18 4.46 7 in. 3.32 4.60 18 Inches. 3.50 4 88 7 in. 3.66 5.04 3.82 5 20 19 Inches. 6 in. 3 85 5.38 7 in. 4.02 5.54 4.16 5.68 20 Inches, 7 in. 4.38 6.02 9 in, 21 Inches. 7 in. 4.84 6.64 Sin. 5 02 6 82 9 in 5.22 7.02 Inches. 7 in. 5.25 7.22 in. 9 in, 5.45 7.42 5.54 7.60 23 Inches, Sin. 5.85 7.98 9in. lOin 6. 08 8.20 5.26 8.3S 24 Inches, Sin, 6. 34 8.58 6.52 8.76 lOin 6.74 8.98 25 Inches. in. 6.84 9.24 9 in. 7.06 9.46 10 in 7.28 9.68 THE KITTEEDGE COR^'ICE AND OEXAMEJsT COMPACT. Ill DESIGN No. 874. Face: Plain, with Leaf and Spun Roll. Sides: Incised. N. B. -This Design is to be regarded as a type of a class. The folloTring ligures are applicable to all Brackets possessing the same general features of ornamentation. Patteexs extra in all cases. See Introductory Note, page 27. Scale : H Inch = 1 foot. DEPTH. 15 in. Projection '! j 10 Inches. 12 Inches, I Face Wiath Il 1 5in. 6 in 7 in. 5 in . 6 in. 7 in. ! (Jucuud iormed..! Complete 1 ! ! 1.78 2.84 1.88 2.94 2 02 3.08 1.98 3.14 2,10 3 26 2.24 3.40 ^1 IS in. 11 Inches. 13 Inches. Face Width i | 5 in . 6 in. 7in. t 5 in. 6 in. 7 in . i^uc and Formed . . Complete | 2.00 3 16 2.12 3.28 2 26 3.42 2.24 3.52 2.36 3.64 2.48 3.76 20 in. 10 Inches. 12 Inches. 14 Inches. Face Width 4 in. 5 in. 1 6 in. 5 in. 6 in. 7 in. 5 in . 6 in. 7in. Cut and ±'ormed.. 1.90 3.06 2.02 3.18 2.14 3.30 2.28 3.56 2.40 3.68 2.52 3.80 2.52 3.96 2.64 4.08 2.75 4.20 2S in. 11 Inches. 13 Inches, j 15 Inches. 17 Inches, Face Width 4 in. 5 in. 6 in 5 in . 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6in. 7 in. v^ut and Formed. . 2 16 3.44 2.28 3.56 2.40 3.68 2 52 3.96 2,54 4.08 2.76 4.20 2.76 4 32 2.88 4.44 3.04 4.60 3.02 4.72 3.14 4.84 3.28 4.98 24 in. Projection 10 Inches. 12 Inches. 14 Inches. | 16 Inches. 18 Inches. Face Width 5in. 6in. 7 in. 2 50 3.78 5in. 6 in. 7 in. 5 in. 6 in. 7 in. 6 in. 7 in. Sin. 6in. 7in. Sin. *^uc and J^'ormtd. . Complete 2 26 3.54 2.38 3.66 2.50 3.94 2.62 4.06 2.76 4.20 2.76 4.32 2.88 4.44 3.04 4.60 3.14 4.84 3.30 5.00 3.44 5.14 3.40 5 24 3.55 5.40 3.72 5.56 26 In. Projection 11 Inches. 13 Inches. 15 Inches. 17 Inches. 19 Inches. ^ Face Width 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 6in. 7 in. Sin. 6 in. 7in. Sin. 6 in. 7 in. 8 in. cue and 1^'ormed. . Complete 2.52 3.96 2 64 4.08 2.76 4.20 2 78 4.34 2 90 4.46 , 3.04 4.60 3.16 4.86 3.30 5.00 3.46 5.16 3.42 5.26 3.58 5.42 3.74 5.58 3 70 5.70 3.85 5.86 4.00 6.00 23 in. Projection 13 Inches. 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width 6 in. Tin. Sin. 6 in. 7iu. Sin. 6in. 7 in. Sin. 6in. 7 in. Sin. 7in. Sin. 9 in. cut and Formed. . Complete 2.83 4.44 3.04 4.61) 3 13 4.74 3.16 4.86 3.30 5.00 3.46 5.16 3.42 5.26 3.58 5.42 3.75 5.60 3.74 5.74 3.90 5.90 4.04 6.04 4.18 6.34 4.38 6.54 4.54 6.70 30 in. ■ 13 Inches. 15 Inches. 17 Inches. 19 Inches. 21 Inches, Face Width 6in. 7 in . Sin. 6in. 7in. 8 in. 7 in. Sin. 9in. 7in. Sin. 9 in. 7 in. Sin, 9 in c,ut and Formed. . Complete 3.14 4.84 3.30 5.00 3.44 5.14 3.44 5.28 3.58 5.42 3.76 5.60 3.92 5.92 4.08 6.08 4.24 6.24 4.22 6.38 4.42 6.58 4.60 6.76 4.55 6.90 4.74 7.08 4.94 7.28 32 in. 14 Inches. 16 Inches. 18 Inches. ! 20 Inches, 22 Inches, Face Width 6in. 7 in. Sin, 7in. Sin. 9in. 7 in. Sin. 9 in. i 7in, Sin. 9 in. 7 in. Sin. 9 in. Cut and Formed. . Complete 3.42 5.26 3 58 5.42 3 74 5. 58 3.92 5.92 4.08 6.08 4.24 6.24 4.26 6.42 4.46 6.62 4.54 6 80 4. 58 6.92 4.76 7.10 4 96 7.30 4.92 7.46 5.12 7.66 5.30 7.84 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches, 23 Inches, Face Width 7 in. Sin. 9in. 7 in. Sin. 9in. Sin. Oin. 10 in. Sin. 9 in. 10 in. 8 in. 9in. 10 in. Cut anil Formed. . Complete 3.90 5.90 4.05 6.06 4.24 6.24 4.24 6.40 4.46 6.62 4.64 6.80 4.76 7.10 4.96 7.30 5.14 7.48 5.14 7,68 5.32 7.86 5.52 8.06 5.48 8.20 5.70 8.42 5.88 8.60 36 in. 16 Inches. 18 Inches, 20 Inches. 22 Inches, 24 Inches, Face Widih 7in. Sin. 1 9in. 8 in. 9 in. 10 in. 1 Sin. 9in. 10 in. 8in, Oin, 10 in. i Sin. 9 in. 10 in cut aud Jb ormed. . Complete 4.24 6.40 4.44 6.60 4.62 6.78 4.80 7.14 5. CO 7.34 5.18 7.52 5.14 7.68 5.32 7.86 5.54 8.08 5.50 8.22 5.70 8.42 5 90 8.62 5 £0 8.78 6.08 8.96 5.30 9.18 38 in. IT Inches. 19 Inches. 21 Inches. j 23 Inches, 25 Inches. PficeWi'lth, 8in. 1 9 in . 10 in. Sin. 9 in . 10 in Sin. 9 in. 10 in li 8 in, il 5.90 Il 8.78 9 in. lOin i Sin. 9 in. 10 in Cut and i? ormed. . Complete 4 74 7.08 4.94 7.28 5.14 7 48 5.12 7 66 5.32 7.86 5.52 8.06 5.50 8.22 5.70 8.42 5.90 8.62 6 10 8.98 6.S2 9.20 5.28 9.34 6.50 9.56 6.72 9 .78 112 TnE KITTKEDGE CORKICE AND ORNAMENT C03IPAIs Y. DESIGN No. 876. Face: Plain and Spun Roll; Square Sink with Leaf. Sides: Plain, with Scamped Ornament. X B —This Design Is to be regarded as a type of a class. The following figures are applicable * * to all Brackets possessing the same general features of ornamentation. Fattekxs extra in all cases. See Introductory Note, page 27. 1 foot. DEl'TH. 16 in. IS in. 20 ia. 22 ia. 23 In. 23 in. 33 in. 31 ia. 36 in. Projection Face Width Cue and Formed. Complete Projection Face Width (^ut and Formca . Complete Projection Face Width Cut and Formed , Complete Projection Face Width uut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width Cut and formed. Complete Projection Face Width uut and Formed. Complete Projection Face Width uut and Formed Complete Projection Face Width Cut and Formed Complete Projection Face Width .... Cut and Formed Complete Projection Face Witith Cut and Formed Complete Projection Face Wi^Y. DESIGN No. 889. Face: riain, with Plain Mitered Drop and Square Sink, with Leaf, Sides: Sunk Panel. B.— This Desifjn is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Pattkrks extra in all cases. See Introductory Note, page 27 Scale : H inch = 1 foot. DEPTH. 16 in. Projection Face Width. Cut and Formed. Complete 18 in. Projection Face Width cut and Formed Complete 20 in. 22 in. 2i in. 25 In. 28 in. SO in. 32 in. Zi in. Projection Face Width. Cut and Formed . Complete Projection Face Width. <^ut and Formed. Complete Projection Face Width . cut and Formed. Complete *6 Inches. .5 in. 6 in. .90 1 52 .98 1.60 *7 Inches, 5 in. 6 in 1.06 1.82 114 1.90 '^8 Inches. Projection Face Width. cut and Formed. Complete Projection Face Width. cut and Formed. Complete Projection Face Width. cut and Formed. Complete Projection Sin. 6 in. 1.22 1.32 2.06 2.16 *9 Inches 5 in. 6 in. 1.40 2.32 1.50 2.42 "8 Inches. 10 Inches. Sin. 6in.niii 1.50 2,48 1.60 2.58 a 72 2. TO 11 Inches. 5 in. I 6in. 2.80 2.90 7 in. 12 Inches. 2.02 3.20 Tin. 2.14 3.32 5 in . 1.06 1.82 1.14 1.90 *9 Inches. Sin. 6 in. 1.22 1.32 2.06 2.16 10 Inches. 5iu. 6in 128 2.14 1.38 2.24 11 Inches. 5 in, 1.52 2.48 1.62 2.58 8in, 2 20 3.38 13 Inches. Gin. 7in. 8in. 2 22 3.50 2.34 3.62 2.40 Face Width. Cut and Formed. Complete Projection Face Width Cut and Formed. Complete 36 in. 38 in. Projection Face Width. cut and Formed. Complete Projection 14 Inches. 3.88 7 in. Sin, 2.62 4.02 2.66 4.06 12 Inches. 5in. 6in. Tin 1.70 2.78 1.80 2.88 1.94 3.02 13 Inches. 5 in. 6 in. 7 in. 1.92 2.04 2.11 3.10 3.22 3.32 14 Inches. 10 Inches. 1.14 1.98 6 in 1.22 2.01 1.32 2.14 11 Inches. Sin. 6 in. 7 in 1.26 2.12 1.3o 2.22 1.46 2.32 12 Inches. 5 in. 6 in. 7 in 1.52 2.48 1.62 2.58 1.74 2.70 13 Inches. Sin. 6 in. 7 in. 1 70 2.78 1.80 2.88 1.92 3.00 14 Inches. 5 in. 1.90 3.08 6 in. 7 in. 2.02 2.14 3.20 3.32 15 Inches. 12 Inches. 5 in. Gin. 7 in 1.24 1.34 1.44 2.10 2,20 2.30 13 Inches. n . 7 in . 2.24 3.52 2.34 3.62 2.42 3.70 5 in . 6 in . 7 in . 1.46 1.56 2.44 2.54 1.68 2.66 14 Inches. Sin. 6 in. 7 in. 1.70 1.80 1.92 2.78 2.88 3.00 15 Inches. 5 in. 6 in . 7 in. 1.90 3.06 2.02 2.14 3.18 3.30 16 Inches. 6 in. 2.20 3.48 2 32 3.60 Sin. 2.38 3. 66 17 Inches. in. 7 in. 15 Inches. j 7in. Sin. 9in. Pacs Width. Cut and JJ'ormed. Complete 2.20 4.42 2 26 4.48 3. 10 4.62 16 Inches. 7 in . T.22" 4.90 Sin. 4.98 9in. 6 in. 2.24 3.52 7in. 2.34 3.62 Sin, 2.42 3.70 15 Inches. 6 in, 2 50 3.90 7 in. 2.62 4.02 16 Inches. 6in. 7in. Sin. 2 (.8 4.08 16 Inches. 7in. Sin. 9in. 3.42 5.1U 17 Inches. in. 9in. lOin 3.^2 S.li6 3.64 5.48 3.74 5.58 2.92 2 98 3.10 4.44 4.50 4.62 17 Inches. in, 9 in. 3.20 3 30 3.42 4.90 5.00 5.12 18 Inches. Sin. 9in. lOin 3.58 3 70 5.42 5.54 3.78 5.62 19 Inches. in. 9 in. 10 in 3.84 5.84 4.00 6.00 4 06 6.06 2.62 4.02 2.68 4.08 17 Inches. 7 in. Sin. 9 in 2.92 4.44 2.98 4.50 3.10 4.62 18 Inches. 7 in. Sin. 3.22 3 30 4 .92 5 00 9 in, 3.42 5 12 19 Inches. in. Oin. 10 in 3.54 5.38 3.66 5.50 3.74 5.58 20 Inches. Sin. 9in. lOin 3.86 4. CO 5.86 6.00 4.08 21 Inches. Bin. 9 in. 10 in 4.16 4.30 6.30 6.44 4.38 6.52 .86 2.62 2.66 4.00 4.04 17 Inches. Sin. .36 Gin, 2.20 3.48 7 in. 2.30 3.58 18 Inches. 7 in. 2.46 2.60 2.64 3.84 3.98 4.02 19 Inches, in,|7in. 8 18 Inches. in. 7in. Sin. 2.74 2.88 2.92 4.26 4.40 4.44 19 Inches. 7in. 8in. 9in. 3 13 3.26 3.38 4.86 4.94 5.06 20 Inches. 7 in. Sin 3.44 5.28 3.52 5.36 3.64 S.48 21 Inches. 8 In. 3.84 5.84 9 in. 3.98 5.98 10 in 4.04 6.04 22 Inches. lin. 9in. lOin 416 4.30 6.28 6.42 4 38 6.50 23 Inches. Sin. 9in. lOin 4. 48 6.76 4.62 6.90 4.72 7.00 2.70 2.84 2.88 4.22 4.36 4.40 20 Inches. 7in. in . 9 in 3.14 3.22 3. 32 4.82 4.90 5.U0 21 Inches. 7 in. Sin, 9 in 3.42 3.50 5 .26 5 34 3.62 5.46 22 Inches. 7in. 3 76 5.76 5.82 3.96 5.96 23 Inches. Sin. 4.14 6.26 9in. 4.30 6.42 10 in 4.36 6.48 24 Inches. n. 9in. lOin 4.48 6.76 4.50 4 70 6.88 6.98 25 Inches. Sin. 4.82 7 24 9 in. 4.96 7.38 lOin, 5. 02 7.48 * Sizes marked with a star are priced as Corbels, that is without Top-Moulding. THE KITTREDGE CORisICE A^s'D ORl^AMEKT COMPANY. 1;?7 DESIGN No. 890. Face: Plain, with Leaf and Plain Mitered Drop. Sides: Sunk Scrolled-Panel. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 2". Inch = 1 foot. DErTn. 20 ia. 22 ia. Projection | * 8 Inches. Face Width. (Jut and Formed. Complete li in. 26 in. 2Sin. 30 In. 32 in. 31 ia. 36 ia. 38 in. 40 in. Projection Face Width. cut and i'ormed Complete Projection Fac=^ Width. Uut and i?ormea. Complete Projection Face Width. cut and Formed. Complete Projection Face Width 4 in. Cut and i'ormed. Complete Projection Face Width . cut and Formed. Complete Projection Face Width . cut and Formed. Complete Projection Face Width cut and i'oimed. Complete Projection Face 'Width . Cut and i'ormetl. Complete Projection Face Width Cut and Formed. Complete 1.16 1.92 f in. 1.2i 2.00 1 36 2.12 * 9 Inches. 4in. I 1.3i 2.18 1.42 2.26 6 in, 1.54 2.38 10 Inches. 5 in. Gin. 7 in. 1.60 2.58 1.70 2.(58 1.82 2.80 11 Inches. 5 in. 88 1.90 2.98 Tin. 2.02 3.1U 12 Inches. 6 in. 7 in. 8 in 2.10 3.26 2.22 3.38 2 34 3.bU L3 Inches. 2.30 3. £8 Sin, 2.54 3.82 14 Inches. 6 in 2 56 3.94 Tin. 2.70 4.08 8 in. 2.80 4.18 Projection 42 in. Face Width. cut and J^'ormed. Complete Projection Pace Width. Cut and 1! ormed. Complete 15 Inches. 7 in. 2 96 4.46 Sin, 3.08 4.5S 9 in. 3.22 4.72 16 Inches. 10 Inches. 4 in. 1.28 2.16 6 in 1.50 2.38 11 Inches. 4 in 1.50 2.48 5 in . 1.62 2. 6 J Gin. 1.72 2.70 12 Inches. 1.78 2.86 5in. Gin. 7jn 1.88 2.96 2.02 3 10 13 Inches. 5in. Gin. 7 in 2. CO 3 16 2.12 3.28 2.22 3.38 7 in. 3.24 4.88 8 in 3 40 5.04 9in. IT Inches. Sin, 3 65 5.44 9 in, 3.80 5.58 10 in 3.98 5,76 18 Inches. 3.96 5.90 4.12 G.06 lOiu, 4.28 G.22 19 Inches. 9 in. 4.44 6.52 lOin, 4.58 6.66 11 in 14 Inches. in. 7 in. Sin. 2. 32 3.60 2.42 3.70 2.56 3.84 15 Inches. 2 .52 3.36 7 in. 2.70 4.03 Sin. 2.82 4.20 16 Inches. 7 in. 2.98 4.4S Sin. I 9 in, 3. 0 4.60 3. 22 4.72 17 Inches. 3 24 4.88 Bin. 3.42 5.06 Din 12 Inches. 1.62 2.60 1.72 2.70 7in. 1.84 2.82 13 Inches. 5 in . 1.80 2 88 1 90 2.98 7in, 14 Inches. 5 in 1.80 2.88 Gin. 1.90 2 .98 2.02 3.10 15 Inches. 2 02 3 10 3.56 5.20 14 Inches. 5 in. 1.98 3.14 2.10 7 in. 2.22 3.38 15 Inches. Gin. 2 32 3,60 7 in. 2.42 3.70 2.56 3.84 16 Inches. 6 in. 2.56 3.94 7 in . 2.82 4 20 17 Inches. 7 in. 2.98 4.48 Sin. 3 10 4.00 9 in, 3. 22 4.72 18 Inches. 7 in. 3.26 4.90 Sin. 3. 42 5.06 9in. 5 in . 1.98 3.14 6in. 2.10- 3. '^6 2.22 3.38 16 Inches. Gin. 2.30 3.58 7in. 2.42 3.70 Sin, 2 54 3.82 17 Inches. Gin, 2.55 3 91 7 in. 2.70 4.08 Sin, 2.80 4.18 18 Inches. 6 in. 2. 82 4 32 7 in. 2.96 4.46 Sin. 3.06 4.56 19 Inches. 3.58 5.20 19 Inches. Sin. 5.46 3.82 5.60 10 in 3.98 5.76 4.76 6 81 18 Inches. Sin. 3. 72 5.50 9in. 3.86 5.64 10 in 4.02 5.80 19 Inches. Sin, 3.36 5.90 4.14 6.08 4. 28 6.22 20 Inches. Sin, 4.23 9in. 4 44 6.52 lOin 4.60 6.68 21 Inches. 9 in 4.76 6.98 lOin. 4.94 7.16 11 in 5.08 7.30 20 Inches. Sin, 5.92 9 in. 4.14 6.08 10 in 4.30 6.24 21 Inches. 4 28 6.36 9 in. 4 44 6.52 lOin, 4.60 6. 68 22 Inches. 9 in. 4.76 6.98 10 in. 4.94 7.16 11 in 5.06 7.30 23 Inches. 9 in, 5.12 7.48 lOin. 5.30 7. 66 11 in. 7 in. 3.22 4.86 Sin, 3.S8 5.02 9in. 16 Inches. 5 in. 3 52 5.16 20 Inches. .14 Gin. 2.10" 3.26 11^- 2.20" 3.36 17 Inches. 5 in , 2.18 3.46 Gin . Tlo" 3,58 7in. "2.40 3.68 18 Inches. 6 in. 2.54 3.92 7in, Sin 2.78 4.16 19 Inches. Gin. 2 78 4.28 7 in. 2.92 4.42 3.02 4 52 20 Inches. 7 in. 3 18 4.82 Sin. 3 34 4.98 9 in. 3.45 5 10 21 Inches. 7 in . 3. .50 5.28 Sin. 3 66 5.41 7 in. 3.52 5.30 Sin. 3.68 5.46 9 in 3.82 5.60 21 Inches. Sin. 3.98 5.92 9 in. 4.14 G.OS 10 in 4. 28 6.22 22 Inches. 8 in. 4.28 9 in 4.44 6.52 lOin. 4 60 6.68 23 Inches. Sin. 4.60 6.82 9 in. 4.76 6.98 lOin 4 94 7.16 24 Inches. 9 in. 5.10 7.46 lOin. 5 28 7.61 11 in 5 44 7.80 25 Inches. 5.46 7.82 11 in. 5 82 8.34 12in 5.98 8.50 22 Inches. 7 in , 5. '•.6 3.96 5.90 9 in. 4.12 6 16 23 Inches. Sin. 4 26 6.34 9 in. 4 44 6 52 10 in 24 Inches. Sin. 9 in. 4.60 6.82 4. 74 6.96 10 in 4.92 7.14 25 Inches. Sin. 4.94 7.30 9in. 5.10 7.46 lOin 5 2i 7.64 26 Inches. 9 in. 5.48 8.00 10 in. 5.64 8 16 5 82 8.34 27 Inches. 10 in. 6.00 S 68 11 in. 12in. 6.16 8.84 6.32 9.00 * Sizes marked with a star are priced as Corbels, that is without Top-Moulding. 128 THE KITTKEDGE COENICE AND OKKAMEi^T COMPANY. BBSIGN No. 891. Face: riain, with Leaf and Shell Work, Plain Mitered Drop, Sides: Voluted. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. Scale : H inch = 1 foot. DEPTH. 15 in. 18 in. 20 in. 22 in. 24 in. 25 In. 28 in. 30 in. }2 in. Zi in. Projection Face Width. Cut and Foruica. Complete Projection Face Width. cut and Formea Complete Projection Face Width. Cut and Formed . Complete Projection Face Width. Cut and Foimed. Complete Projection Face Width Cut and Formed. Complete Projection Face Width. Cut and Formed. Complete Projection Face Width. cut and Formed. Complete Projection Face Width, cut and Formed. Complete Projection Face Width Cut and Formed. Complete Projection 35 in. Face Width Cut and Formed. Complete 10 Inches. 5 in. 1.82 2.54 1.98 2.W 6in. 7in. 2 16 2.88 LI Inches. 5in. 6in. Tin 2.18 2 35 2.84 3.00 3.18 12 Inches. in. Tin. 2.40 3.28 2.58 3.46 2 76 3.G4 13 Inches. Gin. 7 in. Sin. 2.62 2 80 3.5:S 3.16 14 Inches. 6 in. 2.92 3.98 7 in, 3,12 4.18 Sin, 3.28 4.34 Projection ., Face Width. Cut and Formea, Complete Projection Face Width. Cut and Formed. Complete 15 Inches. 7in. 3.42 4.56 3.60 4.74 9 in 3.80 4.94 16 Inches. 7in. 3.74 5.00 Sin, 3 98 5.24 0 in 4.20 5.46 17 Inches. 8in. 4.26 5.60 9 in, 10 in 4.74 6.08 10 Inches. 4 in. 1.40 2.04 Sin. 1.55 2.20 1.74 2.38 11 Inches. 4 in. 1.65 2.38 5 in. 1.84 2.56 6 in 2.00 2.72 12 Inches. 5 in . Too" 2.82 2.15 2.98 7in, 2.36 3.18 13 Inches. 5in. 6in. 7in. 2 24 2.42 2. 58 3.12 3.30 3.46 14 Inches. 6 in. 2.54 3.60 7in, 3.76 3.00 3.96 15 Inches. Gin, 2 94 4.00 7 in. 3.12 4.18 Sin. 3.30 4.36 16 Inches. 10 Inches. 5 in . 1.14 1.98 1.28 2.14 7 in. 1.44 2.34 11 Inches. 5 in. 6 in. 7 in. 1.22 2.18 1.36 2.36 1.52 2.56 12 Inches. 7 in. Sin. 9in 3.44 3.62 4.58 4.76 3.80 4.94 17 Inches. 3.84 5.00 4.00 5.26 9 in. 4.22 5.48 18 Inches. 4.32 5.66 9in 4 54 5.88 10 in, 4.78 6.12 1.84 2.56 Gin, 2.00 2.72 7 in. 2.18 2.90 13 Inches. 2 02 2.84 2 18 3.00 7 in. 2.36 3.18 14 Inches. 5 in. 2 22 3.10 2.40 3.28 7 in. 2.5S 3.46 15 Inches. 6 in. 2.54 3. GO 7in, 2.80 3.76 3.00 3.96 16 Inches. 12 Inches. 5 in , 1.22 2.16 1.36 2 34 7in. 1.52 2.54 13 Inches. 5 in. 1.42 2.52 1.54 2.68 7in. 1.68 2.86 14 Inches. 5 in , 2.oa 2.&1 6 in. 2.18 3.00 7in, 2.36 3.18 15 Inches. 5 in. TW 3.10 6 in. 2.40 7in. 2. 58 3.46 6 in, 2.92 3 98 7 in. 3.12 4.18 3.30 4.36 17 Inches. 7in, 3.44 4.58 3.52 4.76 9in, 4.94 18 Inches. 19 Inches. 8in, 4.60 6.08 9 in 4.85 6.34 10 in 5 08 6.56 Tin. 8in. 3.66 4.00 5.02 5.26 9in, 4.22 5.48 19 Inches. Sin. 9in. 4.28 5.62 4.50 5.84 10 in 4.74 6.08 20 Inches. Sin. 4.62 6.10 9in, 4.85 6.34 10 in 5.10 6.58 21 Inches. 16 Inches. 6 in. 2.62 3.58 Sin, 2.98 3.94 17 Inches. Bin. 2.92 3.98 7 in. Sin. 3.28 4.34 18 Inches. 4.98 6.54 9 in. 5.22 6.78 10 in 5.46 7.02 6)n. 7in. 3.22 4.36 3.42 4.56 3.58 4.72 19 Inches. 7 in. 3.74 4. 98 3.96 5.22 9in. 4.18 5.44 20 Inches. 7in. Sin. 9in. 4.0i 5.38 4.28 5.62 4 50 5.84 21 Inches. Sin. 9 in. 4.52 6.10 4.85 6.34 22 Inches. Sin, 4.98 6.54 9 in 5.22 6.78 lOin 23 Inches. Sin. 5.34 7.00 5.58 7 24 lOin 5.84 7.50 17 Inches. 2.52 3.40 2.52 3.58 7in, 2 78 3.74 18 Inches. 6in. 7in. Sin. 2.90 3 96 3.10 4.16 3.26 4 32 19 Inches. 6 in. 3.18 4.32 7 in. 3.38 4.52 3.54 4.68 20 Inches. 7 in. 3.68 4.94 Sin. 3.92 5.18 4.12 5.38 21 Inches. 7 in. 4.02 5.36 Sin. 4 25 5 60 9 in 4.52 5.82 22 Inches. 7 in. Sin. 4.38 4 60 5. 86 6.08 9 in 4.84 23 Inches. 8in. 4.96 6.52 9in, 5.22 6.78 lOin 5.44 7.00 24 Inches. 5 34 7.00 5.55 7.22 lOin 5.82 7.48 25 Inches. 5.72 7.46 9 in. lOin, 5.95 7.70 5.18 7.96 THE KITTREDGE CORNICE A2s^D ORNAMENT COMPANY. 129 DESIGN No. 892. Face: Plaim, with Leaf and Plain Mitered Drop and Square Sink. SIDES : Voluted and Incised. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Brackets possessing the same general features of ornamentation. Patterns extra in all cases. See Introductory Note, page 27. Scale : H inch = = 1 foot. DEPTH. 16 in. 10 Inches. 12 Inches. Face Width .1 i i 5 in. 6 in 7 in. 5 in. 6in. 1 7in. (Jut and Formea..! Complete 1 1 1.46 3.04 1.54 3.14 1.62 3.26 1.58 3.34 1.66 3 46 1 1.74 3.68 18 in. 11 Inches. 13 Inches. Face Width 5 in. 6 in. 7 in. 5 in. 6in. 7 in. Uut and Formed . . Complete 1.58 3.36 1.66 3.48 1 74 3.60 1.80 3.82 1.86 3.92 1.94 4.04 20 in. 10 Inches. 12 Inches. 14 Inches. Face Width 4 in. 5 in. 6 in. 5 in. 6 in. 7in. 5 in. 6in. 7in. Cut and Formed.. 1 1.82 3.28 1.92 3.38 2.04 3.50 2.24 3.86 2.34 3.96 2.45 4.08 2.46 4.28 2.56 4.38 2.58 4.50 22 in. 11 Inches. 13 Inches. 15 Inches. 17 Inches. Face Width 4in. 5 in. 6 in 5 in. 6 in. 7 in. 5 in. 6in. 7 in. 5 in. ~3"02" 5.14 Bin. 7 in. cut and Formed. . Complete 2.12 3.74 2.24 3.^6 2.34 3.96 2.46 4.28 2.56 4.38 2.68 4.50 2.72 4.68 2.84 4 80 2.96 4.92 3.10 5.26 3 20 5.36 24 in. 10 Inches. 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width . Sin. 6in. 7 in. 5in. 6 in. 7in. 5 in . 6 in. 7 in. 6 in. 7 in. Bin. 6 in. 7in. Sin. ut and Formed. . 2.22 3 10 2.40 3.28 2 50 3.b8 2.43 3.42 2 64 3.58 2.76 3. TO 2.74 3 80 2.83 3.98 3.04 4.10 3.04 4. IS 3.22 4. 36 3.32 4.46 3.50 4.74 3 64 4.88 3.82 5.06 30 in. 13 Inches, 15 Inches, 17 Inches. 19 Inches. 21 Inches, 6in. Tin. Bin. 6 in. T in. Sin. Tin. Sin. 9 in. Tin. Sin. 9 in. Tin. Sin. 9 in. Lut and f ormed. . 2 45 3.40 2.64 3.58 2.74 3.68 2.76 3.82 2.92 3.98 3.04 4.10 3.25 4.40 3.38 4.52 3.54 4.68 3.54 4.T8 3.58 4.94 3.88 5.14 3.84 5.18 3. 98 5 32 4.18 5.52 32 in. 14 Inches. 16 Inches. 18 Inches. 20 Inches, 22 Inches. r ace VV Hltri fi in . Tin. Sin. T in. Sin. 9in. T in. Sin. 9 in. T in. Sin. 9in. Tin. Sin. 9in, Cut and Formed. . Complete 2.74 3.80 2 92 3.98 3 02 4.08 3.26 4.40 3.38 4.52 3.54 4.68 3.58 4.84 3.72 4 98 3.92 5 18 3 86 5.22 4.00 5.36 4.20 5.54 4.20 5.68 4 34 5.82 4.54 6.02 34 in. 15 Inches. 17 Inches. 19 Inches. 21 Inches. 23 Inches. Face"Wiutana Formed Complete .62 1.14 If 1.18 .68 1,20 .70 1.26 .72 1.28 74 1.30 1 .74 1.32 .76 1.34 ,80 1,4'J .80 1 .44 .82 1,46 .84 1 48 Sin. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. r ace vv 1 III.... 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. Cut and t oruieu Complete .74 1.30 .76 1.34 .80 1.3S .82 1.44 .86 1.48 .90 1.54 .92 1 1.60 .94 1,62 .98 1,68 1.02 1.76 1.06 1.80 1.08 1.82 9 in. Projection 13 Inches. 15 Inches. 17 Inches. 1 19 Inches. r ace w Ku n . . . . 5 in. 6 in. 7 in. 5 in 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Jb ormea Complete .86 1.46 .90 1 52 .92 1 54 .96 1.62 .98 1.66 1.C2 1.70 1.04 1.76 1.08 1.80 1.10 1.84 1.12 1.90 1.16 1.94 1.20 2.00 10 is. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Winth. . . 5 in. .96 1,60 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Out and Formed Complete .98 1.64 1.02 1.68 1.04 1.74 1.08 1.78 1.10 1.82 1.14 1.90 1.16 1.92 1.20 1.98 1.20 2.02 1.24 2.06 1.30 2.14 11 in. Projection .... 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width.... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Formed Complete 1.14 1.66 1.18 1.72 1 20 1.74 1.20 1.74 1.24 1.78 1.26 1.80 1.30 1 90 1.34 1.94 1.38 1.98 1.42 2.04 1.46 2.08 1.50 2.12 12 in. Projection .... 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width.... 6 in. 7 in. Sin. 6 in. 1.40 2.26 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Formeu Complete i 1.30 1 2.10 1.34 2.14 1.38 2.18 1.44 2.30 1,48 2,34 1,54 2.46 1.56 2.48 1.62 2.54 1.62 2.58 1 66 2.62 1.70 2.66 *Sizes marked with a star are calculated without Top-Moulding. THE KITTREDGE COR^^ICE AKD ORi^AMEKT COMPAJ^Y. 137 DESIGN No. 762. Face: Plain. Sides: Plain, Avith Sunk-Panel, Stamped Ornament. N. B.— This Design Is to be regarded as a type of a class. The following figures are applicable to all Modilllons possessing the same general features. Pattebns extra in all cases. See Introductory Note, page 27. Scale : 14 Inch = 1 foot. DEPTH. 4ia. Projection .... 7 Inches. 8 Inches. 10 Inches. 12 Inches. Face Width .... 3 in. 4 in. 3 in. 4 in. 3 in. 4 in. 3 in. 4 in. Cut and Formed Complete .46 .80 .46 .80 .46 .82 .48 .84 .50 .88 .52 .90 .56 .96 .58 .93 / 5 In. Projection ... . 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut aud J?'ormevl complete .52 .90 .52 .90 .54 .92 .52 .92 .54 .94 .55 .96 ..58 1.00 .60 1.02 .62 1.04 .66 1.12 .68 1.14 .70 1.16 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Fare Width . . . 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut and i'ormeu Complete .68 1.18 .70 1.20 .72 1.S6 .70 1.24 .72 1.23 .74 1.30 .80 1.40 .84 1.44 .86 : 66 .92 1.56 .94 1.58 .96 1.60 Tin. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width .... 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. (jVLt anu Formed Complete .84 1,44 .88 1.48 90 1.50 .90 1.52 .92 1 54 94 1.50 .94 1.58 .96 1.60 1.00 1.66 1.06 1 .74 1.03 1.76 1.10 1.78 Sin. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Wi"th 4 in. Sin. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. Cut aud J? ormed .94 1.56 .96 1.60 1.00 1.64 1.10 1.78 1.14 1.82 1.18 1.88 1.20 1.92 1.22 1.94 1.26 2.00 1.28 2.08 1 32 2.12 1.34 2.14 Sin. Projection .... 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 1.36 2.14 6 in. 7 in. 5 in. 6 in. 7 in. Cue and f ormed Complete 1.14 1.83 1.18 1.88 1.20 1.90 1.22 1.94 1.24 1.98 1.28 2.02 1.40 2.18 1.42 2.22 1.46 2.32 1.50 2.36 1.54 2.42 10 is. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut ana Formed Complete 1.22 1.94 1.24 1.98 1.28 2.02 1.28 2.04 1.32 2.08 1.34 2.12 1.46 2.30 1.48 2.32 1 52 2.38 1.58 2.48 1.62 2.52 1.68 2.60 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Fare Width. . . . 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Bin. 1.68 2.58 7 in. 8 in. 6 in. 7 in. 8 in. 1.92 2.88 cut aud tormea Complete 1.48 2.30 1.52 2.36 1 54 2.38 1.54 2.40 1.58 2.44 1.60 2.46 1.72 2.62 1.76 2.66 1.84 2.80 1.88 2.84 12 in. Projection .... 18 Inches. 20 Inches. 22 Inches. 24 Inches.*^ Face Width.... Cut and Formea Complete 6 in. 7 in. 8in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. Sin. 1.72 2.62 1.76 2.66 180 2.70 1.82 2.76 1.86 2.80 1.90 2.84 1.96 2.04 1.98 2.96 2.04 3.02 2.04 3.06 2.08 3.10 2.12 3.14 138 THE KITTREDGE CORNICE AND ORKAMENT COMPAI^^Y. Face: Plain, DESIGN No. 763. Sides: Plain, with Incised Work. N. B —This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. ipii||| Scale : >4 inch = 1 foot. DEPTH. Projection 7 Inches. 8 Inches. 10 Inches. 12 Inches. Face Width .... 3 in. 4 in. 3 in. 4in. 3 in. 4 in. 3 in. 4 in. Cut and Formed Complete .42 .12 .42 .72 .42 .76 .44 .78 .48 .86 .50 .88 .52 .98 .54 1.00 *5 la. Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width .... 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. (Jut and Formed .48 .88 .48 .88 .50 .90 .50 .94 .52 .96 .54 .98 .58 1.10 .50 1.12 .62 1.14 .64 1.24 .65 1.26 .68 1.28 6 in. Projection .... 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width. . 3 in. 4 in. 5 in. 3 in. 4 in. .66 1.20 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut and Formeu Complete .62 1.08 64 1.10 .66 1.16 .64 1.16 .63 1.22 .72 1.36 .76 1.38 .78 1.40 .80 1.48 .82 1.50 .84 1.52 7 in. Projection .... 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width... . 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. (Jut ana Formed .72 1.34 .75 1.38 78 1 .40 .82 1.50 .84 1.52 .86 1.54 .84 1.56 .85 1.58 .90 1.64 .94 1.76 .96 1.78 .98 1.80 Sin. Projection .... 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Wirlth. .. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. *^nt and i'ormeu .85 1.56 88 ICQ .92 1.64 1.76 1.00 1.80 1.04 1.86 1.06 1.96 1.08 1.98 1.12 2.04 1.15 2.12 1.20 2.16 1.22 2.18 9 in. Projection .... 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width. . . . 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. (>uc and Formed Complete ~1'T02~ l.h6 1.05 1.92 1.08 1.94 1.12 2.02 1.14 2.06 1.18 2.10 1.20 2.16 1.24 2.20 1.25 2 24 1 28 2.30 1.32 2 34 1.35 2.40 'lOin. PmippHnn X 1 1.^ J C^./l^ll.'JLl • • • . 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face W^irith. . . 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. (Jut and Formed Complete 1.14 2.06 1.15 2.10 1.20 2.14 1.20 2.18 1.24 2.22 1.25 2.26 1.32 2.36 1.34 2.38 1.38 2.44 1.38 2.48 1.42 2.52 1.48 2.60 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width.... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6in. 7 ir^. 8 in. 1^^ 2 68 6 in. 7 in. 8 in. (Jut and t ormeu Complete 1.30 2.32 1.34 2.38 1-35 2.40 1.36 2.42 1.40 2.46 ,1.42 2.48 1.48 2.fc0 1.52 2.64 1 58 2.78 1 62 2 82 1.65 2.82 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width.... 6 in. 7 in. Bin. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. (Jut and Formeu Complete 1.48 2 62 1.52 2.66 1.56 2.70 1 60 2.82 1.64 2.86 1.68 2.90 1.74 3.C4 1.76 3.t6 1.82 3.12 1 84 3.18 1 83 3.22 1 92 3.26 *Sizes marked with a star are calculated without Top Moulding. THE KITTREDGE CORNICE AKD ORNAMEKT COMPANY. 139 DESIGN No. 764. Face: Plain, with Leaf. N. B.— This Design Patterns extra in all cases. Sides: Plaiu. to be regrarded as a type of a class. The following figures are applicable to all Modilllons possessing the same general features. See Introductory Note, page 2T. Scale : H inch = 1 foot. DEPTH. Projection 7 Inches. 8 Inches. 10 Inches. 12 Inches. Face Wiclfh .... 3 in. 4 in. 3 in. 4in. 3 in. 4 i-^. 3 in. 4 in. Cut and Formea Complete . .38 .52 .33 .52 .38 .52 .46 .60 .43 .62 .54 .70 .54 .70 .62 .78 5ia. Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Fare Width .... 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. iJiit and i ormeu Complete . .42 .58 .48 .61 .54 .72 .46 .62 .54 .72 .60 .78 .56 .74 .64 .82 .70 .88 .52 .80 .70 .88 .76 .96 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width.... 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Gut and Formeu Complete .62 .90 70 1.00 .76 1.10 .66 .96 .72 1.06 .80 1.14 .74 1.10 1.20 .90 1.26 .90 1.1:6 .98 1.36 1.04 1.42 7ia. Projection . . . . 10 Inches. 13 Inches. 13 Inches. 15 Inches. Face Width! . . . 4 in. 5 in. 6 ir. 4 in. 5 in. 6 in. 4 in. 5 in. fi in. 4 in. 5 in. 6 in. K^xxt auu Formed Complete .74 l.iu .84 1.10 90 l.£6 .85 1.22 .92 1.'28 98 1.3(5 .92 1.^:'8 .98 1.36 1.08 1.48 1.08 1.48 1.14 1.54 1.22 1 62 8ia. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Wi Hh . . . . 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. ^wt and J? ormuu Complete .90 95 1.34 1.04 1.44 1.06 1.46 1.14 1.54 1.22 1.G4 1.22 1.64 1.26 1.68 1.38 1.82 1.32 1.7o 1.40 1.84 1.48 1.92 9ia. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width.... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. h in. 6 in. 7 in. Cut and l?'ormeu Complete 1.08 1.48 1.18 1.00 1.24 1.66 1.26 1.68 1.34 1.78 1.42 1.86 1.36 1.80 1.48 1 92 1.54 2.00 1.48 1.94 1.58 2.04 1.66 2.14 10 is. Projection .... 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width. . . 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and i'ormeu Complete 1.22 1.64 1.28 1 .72 1.38 1.82 1.36 1.80 1.44 i.ts 1.52 1.98 1.48^ 1.94 1.56 2.02 1.64 2.12 1.60 2.08 1.70 2.18 1.82 2.32 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width .... 6in. 7 i-^. 8 in. 6 in. 7 in. 8 in. 6in. 7iT>. 8 in. 6 in. 7 in. 8 in. Cut and i? ormeL. Complete 1.52 1.98 1.60 2.08 1.68 2.1G 1.58 2.06 1.66 2.14 1.78 2.26 1.72 2.22 1.80 2.30 "i:94"~ 2.46 1.88 2.10 1.98 2.52 2.12 2.66 12 ia. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width.... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6in. 2.06 2.62 7 in. 8 in. 6 in. 7 in. 8 in. Cut and i'ormeu Complete 1.70 2.20 1.78 2.28 1.86 2.36 1.84 2.36 1.94 2.48 2.08 2.62 2.18 2.74 2.34 2.90 2 24 2.80 2.38 2.94 2.52 3.08 140 THE KITTREDGE COEI^ICE AND ORKAMEJ^T COMPANY. DESIGN No. 765. Face: Plain, with Leaf. Sides : Plain, with Stamped Ornament. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27 SCALE : }4 inch = 1 foot. DEPTH. Projection 7 Inches. 8 Inches. 10 Inches. 12 Inches. Face Width .... 3 in. 4 in. 3in. 4 in. 3 in. 4 in. 3 in. 4 in. (Jut and Formed Complete .50 .68 .50 .68 .52 .70 .60 .78 .62 .80 .68 .86 .70 .90 .78 .98 *5 in. Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width . . . 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut and i'ormea complete .58 .78 .64 .84 .70 .92 .62 .82 .70 .92 .76 .98 .74 .96 .82 1.04 .88 1.10 .82 1.04 .90 1.12 .96 1.20 Gin. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width. . . . 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. Sin. Cut and Formeu Complete .82 1.14 .90 1.24 .96 1.34 .86 1.20 .92 1.30 1.00 1.38 .96 1.36 1.06 1.46 1.12 1.52 1.14 1.54 1.22 1.64 1.28 1.70 Tin. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width. . . . 4 in. 5 in. 6 in. 4 in. 5 in. 1.18 1.58 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. (Jutaua Formed Complete .98 1.38 1.08 1.48 1.14 1.54 1.12 1,52 1 24 1.66 1.18 1.58 1.24 1.66 1.34 1.78 1.36 1.82 1.42 1.88 1.50 1 .96 Sin. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Wi-ith.... 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. Sin. 6 in. Cut and Jb'ormeu Complete 1.20 1.62 1.26 1.34 1.80 1.38 1.84 1.46 1.92 1.54 2.02 1.56 2.04 1.60 2.08 1.72 2.22 1.68 2.18 1.76 2.26 1.84 2.34 Sin. Projection .... 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width.... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in 5 in. Bin. 7 in. (Jut and t ormeu Complete 1.42 1.88 1.52 2.U0 1.58 2.06 1.62 2.10 1.70 2.20 1.78 2.28 1.74 2.24 1.86 2.36 1.92 2.44 1.88 2.40 1.98 2.50 2.06 2.60 10 is. Projection .... 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width... 5 in. Bin. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. (Jut and Formed Complete 1.60 2 08 1.66 2 16 1.76 2.26 1.76 2.26 1.84 2.34 1.92 2.44 1.80 2.44 1.98 2.52 2.06 2.62 2 04 2.60 2.14 2.70 2.26 2.84 11 in. Projection .... 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width.... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Oil. 1 7 in. 8 in. 6 in. 7 in. 8 in. (Jut and J? ormeu Complete 1.94 2.48 2.02 2.58 2 10 2.66 2.02 2.58 2.10 2.6tj 2.22 2.78 2 .18 2.76 2.26 2.84 2T40~ 3.00 2.36 2.96 2.46 3.08 2.60 3.22 12 in. Projection .... 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width.... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Formeu Complete 2.18 2 76 2.26 2.84 2.34 2.92 2.34 2.94 2.44 3.06 . 2.58 3.20 2.58 3.22 2.70 3.34 2.86 3.50 2 78 3.42 2.92 3.56 3.06 3.70 »Sizes marked with a star are calculated without Top Moulding. THE KITTREDGE CORNICE AKD ORNAMENT COMPANY. Face : Plain, with Leaf. DESIGN No. 766. Sides: Plain, with Sunk Panel. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27 •>CALE : M inch = 1 foot, DEPTH. 4ia. No Mould 1 Projection 7 Inches. 8 Inches. 10 Inches. 12 Inches. Face WicPh Sin. 4 in. 3in. 4 in. 3 in, 4 in. 3 in. 4 in. Cut and J?'orniea .48 .82 .48 .82 .48 .84 .55 .92 .60 .96 .66 1.04 .68 1.08 .76 1.16 5 in. No Mould Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width . . . 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut and Jb'ormevi .56 .92 .62 .98 .68 1.06 .60 .98 .68 1.08 .74 1.14 .70 1.14 .78 1 .22 .84 1.28 .80 1.26 .88 1.34 .94 lAi 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width.... 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. i 4 in. 5 in. 3 in. 4 in. 5 in. (Jut and Formed .76 1.24 .84 1.34 .90 1.44 .80 1.32 .86 1.42 .94 1.50 .88 ! .98 1.50 i l.lO 1.04 1.66 1.08 1.72 1.16 1.82 1.22 1.88 7 in. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width. . . . 4 in. 5 in. 6 in. 4 in. Sin. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. (jut ana Formed .88 1.46 .98 1.56 1.04 1.62 1.02 1.64 1.08 1.70 1.14 1.78 1.10 1.74 1.16 1.82 1.25 1.94 1 26 1.98 1.32 2.04 1.40 2.12 Sin. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Wi Hh 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 142 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. DESIGN No. 767. Face: Plain, with Leaf. Sides: Plain, with Sunk Scrolled- Panel and Stamped Ornament. N. B.— This Design Is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra In all cases. See Introductory Note, page 27. Scale : J| Inch = 1 foot. 4 in. 5 la. 6 in. 7 in. iin. 10 h. 11 in. 12 ia. Projection Face Width . . . . Cut and Formed Complete Projection Face Width . . . Cut and Formeo Complete Projection Face Width. . . . Cut and Formed Complete Projection Face Width . .. Cut ana Formed Complete Projection Face Wi 'th . . Cut and a oi meu Complete Projection .. . . Face Width ... Cut and Formeu Complete Projection Face Width. .. Out and Formed Complete Projection Face Width... Cut and ± ormeo Complete Projection Face Width . . Cut anu FoimuL; Complete 7 Inches. 4 in. .62 1.00 8 Inches. 3 in. .68 1.10 4 in. .74 1.16 5 in. .80 9 Inches. 1.42 4 in. .96 1.52 5 in. 1.02 l.t)2 10 Inches. 1.10 1.70 5 in. 20 1.26 1 .92 12 Inches. 4 in. 1.26 1.94 5 in. 6 in. 1.32 2.02 1.40 2.12 13 Inches. 5 in. 1.54 2.30 6 in. 1.64 2.42 Tin. 1.70 2.43 14 Inches. 5 in. 1.68 2.48 0 in. 2.56 7 in. 1.84 16 Inches. 6in. .08 7 in. 2.16 Sin. 2.24 3.16 18 Inches. 6 in. 2.36 3 34 7 in. 2.44 3.42 8 in. 2.52 3.50 8 Inches. 3in. 1.02 4 in. .70 1.10 9 Inches. 3 in. 4 in. .80 1.26 1.32 10 Inches. 4 in. 1.50 1.60 5 in. 1.06 1.68 12 Inches. 4 in. 1.22 1.90 5 in. 1.34 2.04 14 Inches. 4 in. 1.52 2.28 6 in. 1.68 2.46 15 Inches. 5 in. 2.52 1.80 2.62 7 in. 1.88 2.70 16 Inches. 5 in. 1.82 2.66 1.90 2.74 7 in. 1.98 2.84 17 Inches. 2 13 3.10 7 in. 2 24 3.18 20 Inches. 6 in. 2.52 3 54 7 in. 2.76 3.80 10 Inches. 3 in. .72 1.14 4 in. .78 1.22 11 Inches. 3 in. 4 in. .92 1.40 5 in. .98 12 Inches. 3 in. 1.06 1.72 4 in. 1.16 1.82 5 in. 1.22 1.88 13 Inches. 4 in. 1.30 2.00 5 in. 1.36 2.08 1.46 2.20 16 Inches. 4 m. 1.70 2.50 5 in. 1.74 2.54 17 Inches. 5 in. 1.90 2.76 .02 7 in. 2.08 2.96 18 Inches. 5 in. 2 04 2.96 6 in. 2.12 3 04 7 in. 2.20 3.14 19 Inches. 2.34 3 32 7 in. 2.42 3.40 8 in. 2.56 3.56 22 Inches. 7 in. 2.76 3 84 2.88 3.96 12 Inches. 3 in. .82 1.28 4 in. .90 13 Inches. 3 in. I 4 in. .96 1.48 1.04 1.56 5 in. 1.10 1.64 14 Inches. 3 in. 1.28 1.9S 4 in. T36" 2.08 5 in. 1.42 2.14 15 Inches. 4 in. 5 in. 1.52 2.28 1.58 2.34 1.66 2.42 18 Inches. 4 in. TTsT 2 70 5 in. X90" 2.78 1.98 2.86 19 Inches. 5 in. 2.06 3.00 2.16 3 10 .20 20 Inches. 5 in. 6 in 2.22 3.26 2.32 7 in. 2.44 3.45 11 Inches. 6 in. 7 in 2.58 3 62 2.68 3.74 8 in. 2.82 3.88 24 Inches. 6 in. 2.94 4.0-) 7 in. 4.2U 8 in. 3 22 4.34 * Sizes marked with a star are calculated without Top-Moulding, THE KITTEEDGE COKXICE A^^^D OKKAZ^fEi^T COMPAKY. 143 DESIGN No. 768. Face: Plain, with Leaf. Sides: Plain, with Incised Work. N. B.— This Design is to be regrarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Pattekns extra in all cases. See Introductory Note, page 27. DEPTH. Projection 7 Inches. 8 Inches. 10 Inches. 12 Inches. Face Width .... 3 in. 4 in. 3 in. 4 in. 3 in. 4i.. 3 in. 4 in. Cut and Formed Complete .58 .92 .58 .92 .58 .96 .66 1.01 .70 1.12 .76 1.20 .78 1.30 .86 1.38 *5in. Projection .... 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width . . . 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut and I'ormeu complete .68 1.08 .70 1.14 .76 1.22 .70 1.18 .78 1.28 .84 1.34 .84 1 42 .92 1.50 .98 1.56 .94 1.60 1.02 1.68 1.08 1.76 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width. . . . 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. CutandFormeu .82 1.32 .90 1.4^ .96 1.52 .86 1.42 .92 1.52 1.00 1.60 .98 1.68 1.08 1.76 1.14 1.82 1.16 1.90 1,24 2.00 1.30 2.06 7 in. Projection 10 Inches. 13 Inches. 13 Inches. 15 Inches. Face Width.... 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. i^ut and Formed Complete .98 1.66 1.08 1.76 1.14 1.82 1.14 1.88 1.20 1.94 1.26 2.02 1.20 1 98 1.26 2.06 1 36 2.18 1.40 2.30 1.46 2.36 1.54 2.44 Sin. Projection .... 12 Inches. 14 Inches. 16 Inches. 18 Inches. Fare Wi 'th ... 4 in. 5 in. 6 in. 4 in. 5 in. Bin. 4 in. 5 in. 6 in. 4 in. 6 in. 6 in. cut and i? ormea Conaplete 1.18 1.94 1.24 2.02 1.32 2 12 1.38 2.26 1.46 2.34 1.54 2.44 1.56 2. 54 1.60 2.58 1.72 2.72 1.70 2.74 1.78 2.82 1.86 2.90 Sin. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width.... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in 5 in. 6 in. 7 in. Cut and Formeu Complete 1.42 2.34 1.52 2.46 1.58 2.52 1.62 2.60 1.70 2.70 1.78 2.78 1.74 2.78 1.86 2.90 1.92 2.98 1.88 2.9S 1.98 3.08 2.06 3.18 10 is. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width... 5in. 6 in. 7 in. 5 in. 6 in. 1 82 2.88 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formed Complete 1.60 2.60 1.66 2.68 1.76 2.78 1.74 2.80 1.90 2.98 1.90 3.02 1.98 3.10 2 06 3.20 2.02 3.20 2 12 3.30 2.24 3.44 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width.... 6 in. 190 3 00 7 i'l. 8 in. 6 in. 7 in. 8 in. 6 in, 7 i". 8 in. 6 in. 7in, 8 in. 2 56 3.t:6 Cut and Formed Complete 1.98 3 10 2.06 3.18 1.98 3.12 2.06 3.20 2 18 3 32 2.14 3.34 2.22 3.42 2 36 3 58 2.32 3 60 2 42 3.72 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width... 6 in. 7 in. Sin. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. Sin. Cut and Formei- Complete 2.12 3.34 2.20 3 42 2 28 3.50 2 30 3.60 2.40 3.72 2.54 3.86 2.54 3.91 2.66 4.06 2.82 4.22 2.74 4 13 2.88 4.32 3.02 4.4>i * Sizes marked with a star arc calculated without Top-Moulding, THE KITTREDGE CORKICB AKD ORl^AMENT COMPANY. DESIGN No. 769, Face : Plain, with Square Sink and Leaf. Sides: Plain. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. SCALE : 34 inch = 1 foot. T^T?T>TTT JJJiir in. Projection 8 Inches. 9 Inches. 1 .11 Inches. 13 Inches. Face Width . . . 5in. 5 in. 5 in. 5 in. CJut and t'ormeu Complete .52 .8.J .54 .84 .62 .94 1.08 6 in. Projection 9 Inches. 10 Inches. i 12 Inches. 14 Inches. Face Width .... 5 in. 5 in. 5 in. 5 in. Cut and Formeu Complete .70 1.12 .76 1.20 .86 1 34 1.00 1.52 Tin. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width .... 5 in. 6 in. 5 in. 6 in. 5 in. Bin. 5 in. 6 in. Cut and Formeu Complete .80 1 26 .88 1.34 .88 1 36 .96 1.46 .96 1.46 1.06 1.60 1.08 1.64 1.14 1.70 Sin. Projection .... 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width.... 5 in. 6in. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. (Jut and Formed .94 1 41 1.04 1.56 1 10 1.64 1.18 1 74 1.22 1.80 1.30 1.90 1.36 1.98 1.42 2.04 9in^ Projection ... . 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width.... 5 in. 6in. 7 in. Bin. Bin. 7 in. 5 in. 6in. 7 in. 1.48 2.12 5 in. 6 in. 7 in. (Jut and Formed Complete 1.06 1.58 1.16 1 72 1.22 1.78 1.22 1.80 1.28 1.88 1.36 1 96 1.34 1.96 1.42 2.C4 1.46 2.12 1.54 2.20 1.62 2.32 \o In.' >- Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. 61.. 7 in. 5in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 1 7 in. Cut and J^'ormed Complete 1.18 1.76 1.24 1,84 1.32 1.92. 1 30 1.92 1 38 2.00 1.44 2.08 1.46 2.12 1.52 2.18 1.6C 2.30 1.56 2.26 164 2.36 1.74 2.48 11 in. Projection .... 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. 8i». 6 in. 7 in. 8 in. 6 in. Tin. 8 in. Cut and Formeu 1.44 2.02 1.52 2.12 1.60 2.20 1.54 2.16 1.62 2 24 1.70 2.32 1.68 2.34 1.76 2.42 1.86 2.52 1.04 2 54 1.92 2.62 2.02 2.72 12 in. r ^ Projection .... 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 i". 8 in. Uut and Formed Complete 1.6S 2.36 1.74 2.46 1.84 2.. 56 1.80 2.56 1 88 2.61 1.98 2.74 2.00 2.82 2.05 2.88 2 .13 3.00 2.14 2.98 2.22 3.06 2.32 3.16 * Sizes marked with a star are calculated without Top-Moulding THE KITTREDGE G0RKICE AKD ORITAMEKT COMPAKY. 146 DESIGN No. 770, Pace: Plain, with Square Sink and Leaf. Sides: Plain, with Stamped Ornament. N. B.— TMs Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. Bee Introductory Note, page 27 Scale : V inch = 1 foot. DEPTH. *5 ia. Projection 8 Inches, 9 Inches. 11 Inches. 13 Inches. Face Width ... 5 in. 5 in. 5 in. 5 in. (Jut and i^'onncu Complete .68 1.00 .70 1.04 .80 1.16 .94 1.32 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Wi dm .... 5 in. 5 in. 5 in. 5 in. Cut aua i? ormeu Complete .90 1.36 .96 1.44 1.08 1.60 1.24 1.80 7 in. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Wlrlth .... 5 in. 6 in. 5 in. 6 in. 5 in. 6in. 5 in. 6 in. Cut and Jj'ormeu Complete 1.04 1.54 1.12 1.62 1.14 1.66 1.22 1.76 1.22 1.76 1.32 1.90 1.36 1.98 1.42 2.04 Sin." Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width .... 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. Cut and Formed Complete 1.24 1.80 1.34 1.92 1 42 2 02 1.50 2.12 1 56 2.20 1 64 2.30 1.72 2.40 1,78 2.46 9 in. Projection .... 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width.... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. Bin. 7 in. 5 in. 6 in. 7 in. Cut and Formeu Complete 1.40 1.98 1.50 2.12 1.56 2.18 1.58 2.22 1.64 2.30 1.72 2.38 1.72 2.40 1.80 2.43 1.86 2.56 1.86 2.58 1.94 2.66 L2.02 2.78 10 in. Projection .... 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formea Complete 1.56 2.20 1.62 2.28 1.70 2.36 1.70 2.38 1.78 2.46 1.84 2.54 1.88 2 62 1.94 2.68 2.02 2.80 2.00 2.78 2.08 2.88 2.18 3.00 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. 8in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Foimeo Complete 1.86 2.52 1.94 2.62 2.02 2.70 1.98 2.68 2.06 2.76 2 14 2.84 2 14 2.88 2.22 2.96 2.32 3.06 2.32 3.10 2.40 3.18 2.50 3.28 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width . . . . 6 in. 7 in. 8 in. 6 in. 7 in. 8ia. 6in. 7 in. 8 in. 6 in. 7 in. 8 in. cut and Formea Complete 2.14 2.92 2.22 3.02 2.32 3.12 2.30 3.14 2.38 3.22 2.48 3.32 2.52 3.42 2.58 3.48 2.70 3.60 2.68 3.60 2.76 3.88 2.86 3.78 Sizes marked with a star are calculated without Top-Moulding. 146 DESIGN No. 771, Face: Plain, with Square Sink and Leaf. Sides: Plain, with Sunk Panel. K. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. DEPTH. *5in. Projection .... 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width . . . 5 in. 5 in. 5in. 5 in. Complete .66 1.14 .68 1.20 .76 1.34 .92 1.54 6 in. Projection .... 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Widfh .... 5 in. 5 in. 5 in. 5 in. (Jut ctncl oriiicu Complete .84 1 46 .90 1.16 1.00 1.74 1.18 1.9S 7 in. Projection .... 10 Inches. 12 Inches. 13 Inches. 15 Inches. Fnoo > j.uii .... 5 in. 6 ip. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. V. u J iiLicl 1? ormeu .94 1.62 1.02 1.70 1.04 1.78 1.12 1.88 1.14 1.92 1.24 V.06 1.26 2.14 1.32 2.20 Sin. Projection .... 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width .... .5 in. 6 in. 5 in. 6 in. 5 in. 6 in. .5 in. 6 in. t ,iir. lirifJ V<*ornrn-'c i 1.10 1.86 1.20 1.98 1 28 2 12 1.36 2.2i 1.42 2.34 1.50 2.44 1.60 2.60 1.66 2.66 9 in. X lUJCVulUIl • » • • 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width. . . . 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. (Jut uuU Foimetl Complete 1.24 2.04 1.34 2.18 1.40 2.24 1.42 2.32 1.48 2.40 1.56 2.48 1.56 2.54 1.64 2.62 1.70 2.70 1.70 2.76 1.78 2.84 1.86 2.96 10 in. Projection .... 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formeu Complete 1.38 2.26 1.44 2.34 1.52 2.42 1.52 2.48 1.60 2.56 1.66 2.64 1.70 2.74 1.76 2.80 1.84 2.92 1.80 2.92 1.88 3.02 1.98 . 3.14 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. Sin. 6 in. 7 in. 8 in. 2-30 3.46 Cut and i'oxmeu Complete 1.66 2.00 1.74 2.70 1.82 2.78 1.78 2.78 1.86 2.86 1.94 2.94 1 92 3.10 2.00 3.08 2.10 3.18 2.12 3.^8 2.20 3 36 12 in. Projection .... 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 i^. 7 in. 8 in. 6 in. 7 in. 8 in. ^ut and Formed Complete 1.90 2.98 1.98 3.08 2.08 3.18 2.06 3.24 2.14 3 32 2.24 3.42 2.28 3 56 2.34 3.62 2.46 3.74 2.42 3.76 2.50 3.84 2.50 3.94 * sizes marked with a star are calculated without Top-Moulding. THE KITTEEDGE COKKICE AIsTD ORl^AMEKT COMPANY. 147 DESIGN No. 772, Face: Plain, with Square Sink and Leaf. Sides: Plain, with Sunk Scrolled Panel and Stamped Ornament. jr. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modlllions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. 1 DEPTH. *5 in. Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width . . . Sin. 5 in. .80~ 1.38 5 in. 5 in. c;ut autl iJ'ormeu OriiTi 111 pf.A .78 :.32 .90 1.52 1.08 1.76 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. FaceWidfh .... 5 in. 5 in. 5 in. 5 in. Cut and Formeu (^.CkTm 111 pf p .96 1.64 1.02 1 74 1.18 1.96 1 83 2.24 7 in. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width .... 5 in. 6 in. 5in. Bin. 5 in. 6 in. 6 in. 6 in. (Jut and Formed (Join pi etc 1.15 1.92 1.24 2.00 1.24 2.04 1.32 2 14 1.34 2.18 1.44 2.32 1.52 2.44 1.58 2.50 Sis. Projection .... 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width ... 5 in. 6 in. 5in. 6 Jn. 1.64 2 56 5 in. 1.70 2.66 6 in. 5 in. 6 in. (Jut and Formeo Complete 1.30 2.12 1.40 2.24 1 56 2,46 1.78 2.76 1.86 1.92 2.98: Sin. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width ... 5 in. 6in. 7 in. 5 in. 6 in. 7 in. .5 in. 6in. 7 in. 5 in. 6 in. 7 in. Cut and Formed m 11 1 p t".p 1.52 2.40 1.62 2.54 1 68 2.60 1.68 2 64 1.74 2.72 1 82 2.80 1.88 2.92 1.96 3.00 2.02 3 08 2.04 3.18 2.12 3.26 2.20 3.38 10 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width ... 5 in. 6 in. 7 in. 5io. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formed Complete 1.64 2.60 1.70 2.68 1.78 2.76 1.76 2.78 1.84 2.86 1.90 2.94 2.02 3.14 2. 08 3.20 2.16 3.32 2.18 3.38 2.26 3.48 2.35 3.60 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width .... 6 in. 7 in. Sin. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 2. 54 3.76 7 in. 8 in. Cut and Formeu Complete 2.00 3 02 2.08 3.12 2.16 3.20 2.12 3.20 2.20 3.28 2.23 3.ci6 2 30 3.44 2.38 3.52 2.48 3.62 2.62 3.84 2.72 3.94 12 in. Projection .... 18 Inches. 20 Inches. 22 Inches. 1: Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. '"2.70 4.04 7 in. Bin. 6 in. 7 in. 8 in. Cut and Formed Complete 2.32 3.50 2.40 3 60 2.50 3.70 2.48 3.74 2.56 3 82 2.66 3.92 ~2T76 4.10 2.88 4.22 2.84 4.24 2.92 4.32 3 02 4.42 * Sizes marked -with a star are calculated without Top-Moulding. 148 THE KITTREDGE CORKICE AKD ORKAMENT COMPAKY. DESIGN No. 773 Pace : Plain, with Square Sink and Leaf. Sides: Plain, with Incised Work, N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modlllions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. w Scale : inch = 1 foot. DEPTH. *5ia. Projection .... 8 Inches, 9 Inches. 11 Inches. 13 Inches. r vt lutii , , , 5 in. 6 in. Sin. 5 in. cut and 1 ormed Complete .74 1.30 .78 1.40 .90 1.62 1.06 1.88 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Facp WirJth 1- TT Ivllil .... 5 in. 5 in. 5 in. 5 in. Cut and Formeu Complete .90 1.54 .96 1 66 1.10 1.9J 1.26 2.]6 Tin. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width ... . 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. Cut and i^'ormeo Complete 1.04 1 82 1.12 l.'JO 1.16 2.02 1.24 2.12 1.24 2.16 1.34 2.30 1.40 2.46 1.46 2.52 8 la. Projection 12 Inches. 14 Inches. 16 Inches. 18 INCHES; Face Width 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 5 i". 6 in. i^ut ana ioimeu Complete 1.22 2.12 1.32 2.24 1 42 2.^4 1.50 2 54 1.56 2.70 1.64 2.80 l.',4 2.96 1.80 3.02 9ia. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Pornieu Complete 1.40 2.44 1.50 2.58 156 2.64 1.58 2.72 1.64 2.80 1.72 2.88 1.72 2.94 1.80 3.02 1.86 3 10 1.86 3.16 1.94 3.24 2.02 3.36 10 la. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width ... 5 in. 1.56 2.72 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. Tfin. 5 in. 6 in. 7 in. Cut and Formeu Complete 1.62 2.80 1.70 2.88 1.68 2.92 1.76 3. CO 1 82 3.C8 1.88 3.20 1.94 3.16 3.38 1.98 3.38 2.06 3.48 2.16 3.60 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. Tin. 8 in. 6 in. 7 in. Sin. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut ana Fornieo Complete 1.82 3.04 1.90 3.14 1.98 3.22 1.94 3.22 2.02 3.30 2 10 3.y8 2 10 3.46 2.18 3.54 2 28 3.04 2.28 3.74 2 36 3.82 2.46 3.92 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width .... 0 in. 7 in. 8 in. 6in. 7 in. 8 in. 6in. 7 in. 8 in. 6 in. 7 in. 8 in. cut ana Formeu Complete 2.08 3.50 2.16 3. GO 2.26 3.70 2.26 3.80 2.34 3.88 2.44 3.98 2.48 4.14 2.54 4.20 2.66 4.32 2.64 4:36 2.72 4.44 2 82 4.54 * Sizes marked with a star are calculated without Top-Moulding. THE KITTREDGE CORI^ICE A]S"D ORKAMEJ^T COMPANY. 149 DESIGN No. 774, Face: Sun\, with Leaf. Sides: Plain. N. B.— This Design Is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra In all cases. See Introductory Note, page 27. Scale : M inch = 1 foot, DEPTH. *5iD. Projection 8 IncheS- 9 Inches. 11 Inches. 13 Inches. Face Width . . . 5 in. 5 in. 5 in. 5 in. cut and Formea Complete .56 .90 .58 .94 .66 1.04 .78 1.18 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches, Face Width .... 5 in. 5 in. 5 i . 5 in. Cut and Formeu Complete .74 1.20 .80 1 30 .90 1.46 1 04 1.61 7iiJ. Projection 10 Inches. 12 Inches, 13 Inches. 15 Inches. Face Width .... 5 in. 6 in. Sin. 6 in. 5 in. Gin. .5 in. 6 in. (Jut and Formea Complete .84 1.36 .92 1.44 .92 1.48 1 00 1.58 .98 1.56 1 03 1.70 1.12 1.74 1 18 1.80 8ia. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width .... 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 1 36 2.04 5 in. 6 in. cut and Foimeo Complete .93 1.56 1.08 1.68 1 14 1.76 1.22 1 86 1.28 1.94 1.42 2 14 1.48 2.20 9 in. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width.... 5 in. 6 in. 7 in. 5 in. 1.26 1.92 6 in. 7 in. 5 in. Bin. 7 in. 5 i n , 6 in. 7 in. Cut and Formeu Complete 1.10 1.70 1.20 1.84 1.26 1.90 132 2.00 1.40 2 08 1.40 2.12 1.48 2.20 ~Tr54~ 2 28 1.54 2.30 1 62 2.38 1.70 2 50 10 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. 6 in. 7 in. 5in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formea Complete 1.24 1 90 1.30 1.98 1.38 2.06 1.38 2.08 1 45 2.16 1.52 2.24 1.52 2.28 1.58 2.34 1.66 2 46 1.66 2.46 1.74 2 56 1.84 2.68 Ilia. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. Sin. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Formeu Complete 1.52 2.2G 1.60 2.36 1.68 2.46 1.60 2.38 1.68 2 46 1.76 2 56 1 78 2.60 1.86 2.70 1.96 2,80 1 92 2 82 2.00 2.90 2.10 3 00 12 in. i 1 Projection .... 18 Inches. 20 Inches. 22 Inches. 23 Inches. Face Width .... 6ln. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. cut and Formed 1.74 2.56 1.82 2 66 1.92 2.76 1.90 2.78 1.98 2.86 2.08 2.96 2.10 3.04 2 16 3.10 2. 28 3 22 2.24 3.22 2.32 3 30 2.42 3 40 * Sizes marked with a star are calculated without Top-Moulding. loO THE KITTKEDGE COEKICE AND ORKAMEKT COMPANY. DESIGN No. 775, Face: Sunk, with Leaf. Sides: Plain, with Sunk Panel. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all ModiUions possessing the same general features. 'atterns extra in all cases. See Introductory Note, page 27. Scale : U inch = 1 foot. DEPTH. *5in. Projection 8 Inches, 9 Inches. 11 Inches. 13 Inches. Face Width . . . 5 in. 5 in. 5 in. 5 in. Uut and Formed Complete .70 1.24 .72 1.30 .80 1.44 .96 1.64 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width .... 5 in. 5 in. 5 in. 5 in. Cut and Formeu Complete .88 1.54 .94 1.66 1.04 1 S6 1.22 2.10 7 in. Projection .... 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width .... 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. Cut and Formed Complete .98 1.72 1.06 1.80 1.08 1.90 1.15 2.00 1.16 2.02 1.25 2.16 1.30 2.U 1.36 2.3J Sin. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width .... 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. Cut and Formed Complete 1.14 1.96 1.24 2.10 1.32 2 24 1.40 2.34 1.48 2.48 1.56 2.C8 1.66 2.76 1.72 2.82 9 in. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width. .. . 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formed Complete 1.28 2.16 1.38 2.30 1.44 2.36 1.46 2 44 1.52 2.52 1.60 2 60 1.62 2.70 1.70 2.78 1.76 2 86 1.78 2.94 1.86 3.02 1.94 3.14 10 In. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formea Complete lAi 2 40 1.50 2.48 1.58 2.56 1.60 2.64 1 68 2.72 1.74 2.80 1.76 2.90 1.82 2.96 1.90 3.08 1.90 3.12 1.98 3.22 2.08 3.34 11 in. Projection .... 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Formeu Complete 1.74 2.84 1 82 2.94 1.90 3 04 1.84 3.00 1.92 " 3 08 2 00 3.18 2.02 3.26 2. 10 3.36 2.20 3.46 2.20 3.56 2 28 3.64 2.38 3.74 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Formed Complete 1.98 3.18 2.06 3.28 2.16 3.38 2.16 3.46 2.24 3.54 2.34 3.64 2.38 3.78 2.44 3.84 2.56 3.96 2.52 4.00 2.60 4.08 2.'-.0 4.18 * Sizes marked with a star are calculated without Top-Moulding. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. / / DESIGN No. 776, Face : Suni, with Leaf. Sides : Plain, witli Sunk Scrolled-Panel and Stamped Ornament. 2T. B.— This Design is to be regarded as a type of a class. The following figures ar& applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. Scale : Inch = 1 foot. DEPTH. *5 in. Projection .... 8 Inches 9 Inches 11 Inches. 13 Inches. Faco Width . . . 5 ir>. 5 in. .34 1.48 5in. 5in. L;ut and FormeU Complete .32 1.42 .94 1.62 1.12 1.86 6 In. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width .... 5 in. 5 in. 5 in. 5 in. Cut and Formet Complete, . 1.00 1.72 106 1.84 1.22 2.08 1 42 2.36 7 in. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width ... 5 in. 6 in. 1 23 2.10 5in. 6in. 5 in. 1 6 in. 5 in. 6 in. 1.62 2.60 Cut and Formed Complete 1.20 2 02 1 23 2.16 1.36 2.26 1 35 2.28 1.46 2.42 1.56 2.54 Sin. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width .... 5 in. 6 in. 1.44 2.36 Sin. 6Jn. 5 in. 6 in. 5 in. 6 in. uut and Formed Complete 1.34 2 24 1.60 2.58 1.68 2.68 1.76 2.80 1.84 2 90 1.92 3 08 1.98 3.14 Sin. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width.... 5 in. 6 in. 1 -Tin. 5 in. 6 in. 7 in. 5 in. Bin. 7in. 5 in. 6 in. 7 in. «Jut and Formed Complete 1.56 2 52 1.66 2 66 1.72 2.72 1.72 2.76 1.78 2.84 1.86 2 92 1.94 3.08 2.02 3 16 2.C8 3 24 2.12 3.36 2 20 3.44 2.23 3.56 10 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formed Complete 1.70 2 74 1.76 2.82 1.84 2.90 1.84 2 94 1.92 3.02 1.98 3.10 2.08 3.30 2.14 3.36 2.22 3.48 2.23 3.58 2 36 3.68 2.45 3.80 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. Sin. Uut and Fuiiuet. Complete 2.03 3.26 2.16 3.36 2. 24 3 46 2.18 3.42 2.26 3 50 2.34 3 60 2.40 3.70 2.48 3.80 2.53 3.90 2.62 4.04 2 70 4.12 2.30 ; 4 .22 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width .... 6in. 7 in. 8 in. 6 in. 2.53 3.96 7 in. I Sin. 6 in. 7 in. 8 in. 6in. 7 in. Sin. L-ut and. Formed Complete 2.40 3.70 2.43 3 80 2.58 3 90 2.66 4.04 2.75 4.14 2.80 4.26 2.86 4.32 2.93 4.44 2.94 4.48 3.02 4.56 3 12 4.66 * Sizes marked with a star are calculated without Top-Moulding. 152 THE KITTEEDGE CORKICE AND ORNAMEl^T COMPANY. DESIGN No. 777, Face: Sunk, with Leaf. Sides: Plain, with Incised Work. jr. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra In all cases. See Introductory Note, page 27. Scale : M iiich = 1 foot. DEPTH. *5in. Projection 8 Inches, 9 Inches. 11 Inches. 13 Inches. Face Width . . . 5 in. 5ii. 5 in. 5 in. Dnt and I'ormed Complete .78 1.40 .82 1.50 .94 1.72 1.10 1.98 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width 5 in. j Sin. 5 in. 5 in. Uut and Formeu Complete .94 1.62 1.00 1.76 1.14 2.02 1.30 2.28 Tin. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width .... 5 in. G in. 5 in. 6in. 5 in. 6 in. 5 in. 6 in. (Jut and i? ormeu Complete 1.08 1.92 1.16 2.00 1.20 2.14 1.28 2.24 1.26 2.26 1.36 2.40 1.44 2.56 1.50 2.62 Sin. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face WifUh .... 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 5 in. G in. C/Ut ana Formeu Complete 1.25 2 24 1.36 2.36 1.46 2.56 1.54 2.66 1.65 2.84 1.73 2.94 1.80 3 12 1.86 3.18 9 in. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. Gin. .in. 5 in. Bin. •Tin. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Liut and Formeu Complete 1.44 2 56 1.54 2.70 1.60 2.76 1.62 2.84 1.68 2.92 1.76 3 00 1.78 3,10 1.86 3.18 1.92 3.26 1.94 3.34 2.02 3.42 2.1C 3.54 10 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. (Jut and ijormcu Complete 1.62 2 S6 1.68 2.94 1.76 3.02 1.76 3.08 1.84 3.16 1 90 3.24 1.94 3.36 2.00 3.42 2.08 3.54 2.08 3.58 2.16 3.68 2.26 3.80 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7 in. Bin. 6 in. 7 in. Sin. 6 in. 7 in. Bin. 6 in. 7 in. 8 in. (Jut and Formed Complete 1.90 3.28 1.98 3.38 2.06 3.48 2.00 3.44 2.08 3 52 2.16 3.62 2.20 3.72 2.28 3.82 2.36 3.92 2.36 4.02 2 44 4.10 2.54 4.20 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 2.36 4.02 7 in. 8in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. i^m and Formed Complete 2.16 3.70 2.24 3.80 2.34 3.90 2.44 4.10 2.54 4.20 2.58 4.36 2.64 4.42 2.76 4.54 2.74 4.60 2.82 4. 08 2 92 4.78 * Sizes marked with a star are calculated without Top-Moulding. THE KITTEEDGE CORiq^ICE AKD OR^STAMEi^T COMPAI^Y. 153 DESIGN No. 762. Face: Moulded throughout. Sides: Plain. N. B,— This Design Is to be regarded as a type of a class. The followlnsr figures are applicable to all Modillions possessing the same general features. Patterns extra In all cases. Introductory Xote, page 21 Scale : >4 inch = 1 foot DEPTH. Projection 7 Inches. 8 Inches. 10 Inches. 12 Inches. Face WirVh.... 3 in. 4 in. 3 in. 4 in. ~ri8~ 1 ,28 3 in. 4 in. 3 in. 4 in. Cue and Formed Complete 1,12 1.22 1.12 1.22 1,12 1.22 1,20 1.30 1.26 1.36 1.26 1.36 1.32 1.42 ■•^•5 in. Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Fare Width .... 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. tjiit nnd J* uiuiew complete 1.28 1.40 1.34 1 46 1,38 1 50 1 30 1.42 1.36 1.48 1.42 1 54 1.38 1,50 1 44 1,56 1,48 1,60 1.48 1.60 1.56 1.68 1.60 1.72 6ia. Projection 9 Inches. * 10 Inches. 12 Inches. 14 Inches. Face Width... . 3 in. 4 in. 5 in. 1,46 1,74 3 in. 4 in. 5 in. 1.50 1.78 3 in, 4 in. 5 in. 3 in. 4 in. 5 in. (Jut and Formed Complete 1.34 1.58 1 42 1.66 1.38 l.t4 1.44 1.72 1,46 1.76 1.54 1.84 1.58 1 88 1.60 1.90 1.68 1.98 1.72 2.02 Tin. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width.... 4 in. 5 in. 6 in. 4 in. 1,66 1.96 5 in. 6in. 4 in. 5 in. 1.75 2.06 6 in. 4 in. 5 in. 6 in. out aua -b'ormed Complete 1.54 1.84 1,64 1.94 1 58 1.98 1.70 2.00 1 74 2.04 1.72 2.02 •1.82 2.14 1.85 2.18 1.90 2.i!2 1.96 2 28 8 in. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Wi th ... 4 in. 5 in. 6 in. 1.86 2.18 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. Bin. 6 in. cue aiid r uiiucu Complete 1.74 2.U4 1 73 2.10 1.88 2.20 1.96 2.28 2.04 2.38 2.04 2.S8 2.08 2.42 2.18 2.54 2.14 2.50 2.20 2.56 2.26 2.62 9 12. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. 6 in. 7 in. 5 in. 1 6 in. 7 in. 5 in. 2.22 2.58 6 in. 7 in. 5 in. 6 in. 7 in. Cue and J: ormed 1.98 2.30 2.04 2.38 2.08 2.42 2.14 1 2.20 2.48 1 2.56 2,26 2.62 2.32 2.68 2.35 2.74 2,34 2,72 2,40 2.78 2.45 2.86 10 i2. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Wirith... 5 in. 6 in. •Hin. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 2.62 3.02 7 in. 2.70 3.12 ciut and Formed Complete 2.20 2.54 2.24 2.60 2.32 2.68 2,32 2,68 2.38 2.74 2,44 2,82 2.44 2.82 2.48 2.86 2 54 2.94 2,54 2,94 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width. . . . 6in. 7 in. Sin. 6 in. 7 in. Sin. Bin. 7 ir>. Sin. 6 in. 2,86 3.30 7in. 8 in. cut and i? ormeu Complete 2.54 2,92 2,60 3,00 2 68 3.08 2,58 2.98 2.64 3.04 2,76 3.16 2.72 3.14 2,78 3.20 2.90 3,32 2.94 3 38 3.06 3.50 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width.... 6 in. 7 in. 2,85 3.28 Sin. 6 in. 2.92 3,36 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Forme*. Complete 2,80 3.22 2.92n 3.34 3.00 3,44 3,10 3,54 3.14 3.60 3.22 3,68 3.36 3.82 3, 30 3,76 3 40 3.86 3 52 3.98 ''Sizes marked with a star are calculated without Top-Moulding. 154 THE KITTREDGE COEmCE AKD OEI^AME]S"T COMPAKY. DESIGN No.*779. Face: Moulded throughout. Sides: Plain, with Sunk Panel. N. B.— This Design is to be regrarded as a type of a class. The following figures are applicable to all Modillioas possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. Scale : M inch = 1 foot. DEPTH. ! Projection 7 Inches. 8 Inches. 10 Inches. 12 Inches. b^acc Wid h ... . 3 in. 4 i n. 3 in. 4 in. 8 in 4in. 1 3 in. 4 in. Cutantl J?'orineu Complete 1.22 1.52 1.22 1 5i 1.22 1.51 1.28 1.60 1.32 1.64 1.38 1.70 1.40 1.74 1.46 1.80 Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width .... 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut aud Formeu Complete 1.42 1 74 1.48 1.80 1.52 1.84 1 44 1.78 1.50 1.84 1.56 1.90 1.52 1.9J 1.58 1.96 1.62 2.00 1.66 2.06 1.74 2.14 1.78 2.18 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width 3 in. 4 in. Sin. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut and Formeu Complete 1.48 1.92 1.56 2.00 1.60 2.08 1.52 2.00 1.58 2.08 1 64 2.14 1.60 2.16 1.68 2.24 1.72 2 28 1.78 2.36 1.86 2.44 1.90 2.48 Tin. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width.... 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 0 in. Cut and Formed Complete 1.68 2.20 1.78 2.30 1.82 3.34 1.82 2.38 1.85 2 42 1.90 2.46 1.90 2.48 1.94 2.52 2.00 2.60 2.04 2 6S 2.08 2.72 2.14 2.78 Sin. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Wilth.... 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. Cut and J?'ormed 1.90 2.46 1.94 2.52 2.02 2.60 2.06 2.68 2.14 2.76 2.22 2.86 2.24 2.92 2.28 2.96 2.38 3.08 2 38 3.12 2.44 3.18 2.50 3.24 9 in. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. C in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 2 70 3.50 Cut and Formed Complete 2.16 2.76 2.22 2.84 2.26 2.88 2.34 3.00 2.40 3.08 2.46 3.14 2.44 3.16 2.54 3.26 2.58 3.32 2.58 3.36 2.64 3.42 10 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5in. 6 in. 7 in. (Jut and Formed Complete 2.40 3.04 2.44 3.10 2 52 3.18 2.54 3.24 2 60 3.30 2 66 3.38 2.68 3.44 2.72 3.48 2.78 3.56 2.78 3.60 2.86 3.68 2.94 3.78 11 in. Projection IG Inches. 17 Inches. 19 Inches. 21 Inches. Face Width.... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6in. 2.96 3.96 7 i-^. 8 in. 6 in. 7 in. 8 in. Cut aud Formed Complete 2.76 3.76 2.82 3.82 2 90 3.90 2.82 3.82 2.88 3 88 3.00 4.00 3. 02 4.02 3.^4 4.14 3.14 4.14 3.'^2 4 r2 3.34 4.34 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width.... 6 in. 3.04 3.84 7 in. Bin. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Formed Complete 3.10 3.90 3.16 3.96 3.18 4.04 3.26 4.12 3.36 4.22 3.42 4.34 3.50 4.42 3.64 4.56 3.58 4.54 3.68 4.64 3.80 4.76 *Sizes marked with a star are calculated without Top-Moulding. THE KITTREDGE CORKICE AKD ORiTAMEiq'T COMPANY. 155 DESIGN No. 780. Face : Moiilded throughout. Sides : Plain with Sunk Scrolled-Panel and Stamped Ornament. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. Sec Introductory Note, page 27. Scale : }4 inch — 1 foot. DEPTH. Projection 10 Inches. 12 Inches. Face Widfh .... 1 3 in. 4 in. 1 3 in. 4 in. Cut ami i'onueu Complete 1.44 1.82 1.50 1.88 1.54 1 94 1.60 2.00 *5 In. Projection 9 Inches. 11 Inches. 13 Inches. Face Width ... 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut and i' ormuv. Complete 1 56 1.06 1.62 2.02 1.63 2.08 1.66 2.08 1.72 2.14 1.76 2.18 1.82 2.28 1.90 2.36 1.94 2.40 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width, . . . 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut and Formeu 1.60 2.10 1 68 2.18 1 72 2.26 1.64 2.18 1.70 2.26 1.76 2.32 1.78 2.38 1.86 2 46 1.90 2 50 1.98 2.62 2.06 2.70 2.10 2.74 7ia. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width.... 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. Sin, 6 in. vvutana Formed Complete 1.90 2.50 2.00 2. to 2 04 2.64 2.02 2.64 ~2.05~ 2 68 2 10 2.72 2.10 2.74 2 14 2.78 2.20 2.86 2.30 2.98 2.34 3.02 2.40 3.08 Sin. Projection 12 Inches. 14 Inches. 10 Inches. 18 Inches. Fare WiUh 4 in. 5 in. Bin. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. cut and i! ormeu 2.10 2.72 2 14 2.78 2 22 2.86 2.34 3.02 2.42 3.10 2.b0 3.20 2.52 3.24 2.55 3.^8 2.66 3.40 2 64 3.44 ~X70~ 3.50 2. '76 3.56 9 in. Projection .... 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width.... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formeu Complete 2.44 3.12 2.50 3.20 2.54 3.24 2.60 3.32 2.66 3.40 2.72 3.46 2.76 3.54 2.86 3 64 2.90 3.70 2.92 3.78 2.98 3.84 3 04 3.92 10 in. Projection .... 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formeu 2.66 3.38 2.70 3.44 2 78 3.52 2.78 3.54 2.84 3.60 2.90 3.68 3.00 3.84 3.04 3.88 3 10 3.96 3.16 4.06 3.24 4.14 3.32 4.24 11 in. Projection .... 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. Sin. 6in. 3.34 4.24 7 in. 8 in. 6 in. 7 in. 8 in. 3.7T~ 4.72 Cut and i'ormeu Complete 3 10 3.92 3.16 4 00 3 24 4.08 3.16 4.02 3.22 4 08 3.34 4.20 3.40 4.30 3.:2 4.42 3.56 4.52 3. 64 4.60 12 in. Projection .... 18 Inches. 20 Inches. 22 Inches. 24 IlWDHES. Face Width... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 3.73' 4.72 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Formeu Complete 3.46 4.86 3.52 4.42 3.58 4.48 3.60 4.54 3 68 4.62 3.84 4.82 3.92 4.90 4.06 5.04 4.00 5.02 4 10 5.12 4.22 5.24 *Sizes marked with a star are calculated without Top-Moulding. 156 THE KITTREDGE CORi^ICE AND ORKAMENT COMPANY. DESIGN No. 781. Face: Moulded throughout. Sides: Plain, with Incised "Work. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. Scale : 14 inch «- 1 foot. DEPTH. •Mia. Projection 7 Inches. 1 8 Inches. 10 Inches. 12 Inches. Face Width .... Sin. 4 in. 3 in. 4in. 3 in 4 in. 3 in. 1.50 1.96 4 in. Cut and Formed Complete 1.32 1.62 1.32 1 62 1.32 1.66 1.38 1.72 1.42 1.80 1.48 1.86 1.56 2,02 *5 ia. 6iB. Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. (Jut and Formed 1.50 1 90 1.56 1.96 1.80 2.00 1.54 1.98 1.60 2.04 1.66 2.10 1.66 2.18 1.72 2.24 1.76 2.28 1.80 2.40 1,88 2.48 1.92 2,52 Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width. 3 in. 4 in. 5 in. 3 in. 1.58 2.10 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut and Formeu 1.54 2.00 1.62 2.08 1.66 2.16 1.64 2.18 1.70 2.24 1.70 2.32 1.78 2.40 1.82 2.44 1.86 2.54 1,94 2.t)2 1.98 2 66 7 in. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width .... 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. uut ana Formed Complete 1.78 2.40 1.88 2.50 1.92 2.51 1.94 2.62 1.98 2 66 2 02 2.70 2.00 2.72 2.04 2.76 2.10 2.84 2.18 3.00 2.22 3,14 2.28 3.10 S in. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width .... 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. Uut and Formed Complete 2.02 2,72 2 06 2.78 2.14 2.86 2.20 3.00 2.28 3.08 2.36 3.18 2.38 3.28 2.42 3.32 2.52 3.44 2 52 3.48 2.58 3.54 2.64 3. KG Sin. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width .... 5 in. 6 in. 7 in. 5 in 6 in. 7 in. 5 in. 6 in. 2.70 3.66 7 in. 5 in. 6 in. 7 in. Uut and Jj oruied Complete 2.32 3.16 2.38 S.U4 2.42 3.28 2.50 3.40 2.56 3.48 2.62 3.54 2.60 3.56 2.74 3.72 2.71 3.76 2.80 3.82 2.86 3.90 10 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face WiHth. . . 5 in. 6in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Out and Formed Complete 2.53 3.50 2. 62 3.56 2.70 3.64 2.70 3.68 2.76 3.74 2.82 3.82 2.86 3.90 2.90 3.94 2.96 4.02 2.96 4.06 3.04 .4.14 3.12 4.24 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width. . . . 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6in. 3.14 4.26 7 in. 8 in. 6 in. 7 in. 8 in. Cut and f ormed Complete 2.92 3.94 2.98 4 02 3 06 4.10 2.98 4.04 3.04 4 10 3 16 4.22 3.20 4.32 3.32 4 44 3.30 4.50 3.38 4,58 3.50 4.70 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Formeu Complete 3.22 4.36 3.28 4.42 3.34 4.48 3.38 4.60 3.46 4.68 3.56 4.78 3.62 4.92 3.70 5.00 3.84 5.14 3.80 5.14 3.90 5.24 4.02 5.36 *Sizes marked with a star are calculated without Top-Moulding. THE KITTKEDGE COENICE AKD OKKAMENT COMPAKY. 157 DESIGN No. 782, Face: Spim-Roll and Square Sink with Leaf. Sides: Plain. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modlliions possessing the same general features. Pattbrns extra in all cases. See Introductory Note, page 27. Scale : M inch = 1 foot. ''Sin. Projection Face Width . . . (Jut and Formeu Complete Projection FaceWidth ■■■■ Cut and Formeu Complete Projection Face Width ... Cut and Formed Complete Projection Face Width . . . . v^ut and Formed Complete Projection Face Width. ■ . . Cut and Formed Complete Projection Face Width . . . . Cut and Formeu Complete Projection Face Width .... Cut and Formtju Complete Projection Face Width . . . . Cut and Formed Complete 8 Inches. 5 in. 9 Inches. 5 in. 11 Inches. 5 in. 13 Inches. 5in. 1 38 1.66 1.40 1.70 1.48 1.80 1.60 1 .94 9 Inches. 6 in. 5 in. 1.46 1.88 10 Inches. 12 Inches. 14 Inches. 5 in. 1.52 1.96 5 in. 1.62 2.10 5 in. 1 76 2.28 10 Inches. 7 in. 5 in. 1.66 2 12 6 in. 1.74 2.20 12 Inches. 12 Inches. 13 Inches. 15 Inches. 5 in. 1 74 2.29. 6 in. 1.82 2.32 5 in. 1.82 2. 32 5 in. 1.94 2.50 14 Inches. 5 in. 1.84 2 34 6 in. 2.48 5 i n . 2.00 2.54 2.10 2 66 13 Inches. 9 in. 5 in. 2.04 2 56 2.14 2 70 7 in. 2.20 2 76 14 Inches. 15 Inches. 5 in. 2.20 2.78 2.26 7 in. 2 34 2.94 16 Inches. 10 in. 2.26 2 !r4 6 i". 2.32 2.92 7 in. 2.40 3.00 5 in. 2 38 3.U0 6 in. 2.46 3.08 7 in. 2.52 3.16 16 Inches. 17 Inches. 11 in. 6 in. 2.60 3.24 .34 8 in. 2.78 3.46 18 Inches. 12 in. Gin. 2 92 3.62 7 in. 8 in. 3 00 3.72 3.10 3.82 Sin. 2.88 3.58 20 Inches. 6in. 3.14 3.90 8 in. 3.24 4.00 16 Inches. 18 Inches. 5 in. 2.12 2.70 6 in. I Bin. 2.22 2.82 2.26 2.88 2 34 2.96 17 Inches. 19 Inches. 5 in. 6 in. .94 2.40 3.(J2 7 in. 5 in. 2.46 3.10 2.44 3.10 in. I 7 in. 2.60 3.30 18 Inches. 20 Inches. 5 in. 2.54 3.20 6 m. 2.6C" 3.26 7 in. 5 in. 2 68 3 38 2.64 3.34 6 in. 2.72 3.44 2 82 3.56 19 Inches. 21 Inches. 6 in. 2.84 3.56 7 in. 2.92 3.66 8in. 7 in. 8 in. 3. 04 3.78 3.00 3 78 3.e6 3.20 3.98 22 Inches. 24 Inches. 6in. 3.25 4.08 7 in. 3 32 4.14 6 in. 3 44 4.26 3.40 4.26 7 i- 3.48 4.34 Sin. 3.58 4.44 * Sizes marked with a star are calculated without Top-Moulding. 158 THE KITTREDGE CORKICE Al^D ORKAMEInTT COMPAl^Y. DESIGN No. 783, Sides: Plain, with Stamped Ornament. Face: Spun-Roll and Square Sin^ with Leaf. N. B, — This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterxs extra in all cases. See Introductory Note, page 27. Scale : J| inch = 1 foot. DEPTH. *5 in. Projection 8 Inches, 9 Inches. 11 Inches. 13 Inches. Face Width . . . 5 in. 5 in. 5 in. 5 in. cut and Formeu Complete 1.54 1.86 1.56 1.90 1.66 2.'. 2 1.80 2.18 6 la. Projection 9 Inches. 10 Inches. 13 Inches. 14 Inches. Face Wid^h ... 5 in. 5 in. ! 5 in. 5 in. (Jut and Formeu 1.66 2.12 1.72 2.20 1.84 2.36 2.00 2.56 7ia. Projection 10 iNCHEg. 12 Inches. 13 Inches. 15 Inches. Face * idth . . . 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. Cut and J^'ormeu 1.90 2 40 1.98 2.48 2,00 2,52 2 08 2.62 2.08 2 62 2 18 2.76 2.22 2.84 2.28 2.9J 8 ia. Projection 13 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. v/uc ana Foimuu 2.14 2 70 2.26 2 84 2 32 2.92 2.42 3 04 2.46 3.10 2.56 3-22 2.62 3 30 2 70 3.38 9 ia. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. , Face Width. .. 5 in. 6 in. 2.48 3.10 7 in. 5 in. 6in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. ciut and Formeu 2.88 2 96 2.54 3 16 2.56 3.20 2.62 3.28 2.70 3.36 2 70 3.38 2.78 3.46 2 84 3.54 2.84 3.56 2.92 3.64 3.00 3.76 10 ia. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width ... 5 in. G in. 7 in. 5 i>^. 6 in. 7 ' " . ,5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formeu Complete 2 64 3 23 2.70 3.3B 2.78 3.44 2 78 3.46 2 86 3.54 2 M 3.'j2 2 96 3.70 3 C2 3.76 3.10 3.88 3.08 3,86 3.16 3.96 3 26 4.08 11 ia. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. f> in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut ana Foiineo' Comulete 3.02 3.74 3. 10 3.84 3.20 3.96 3.14 3.90 3 22 3 98 3.32 4.10 3 30 4.10 3.38 4.20 3 50 4 32 3.48 4 34 3.56 4.4-2 3.68 4.54 12 ia. Projection 18 Inches. 20 Inches. 23 Inches. 24 Inches. Fac^ Width . .. . 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 i". 7 in. 8 in. f) in. 7 in. 8 in. y^vil ana Formeu Complete 3.40 4.18 3.48 4,28 3.58 4.38 3.56 4.40 3.64 4.48 3.74 4.58 3.78 4.68 3 84 4.74 3.96 4.86 3.94 4.88 4.02 4.96 4.12 5.06 * Sizes marked with a star are calculated without Top-Moulding. THE KITTREDGE COKiq"ICE AKD ORNAMENT COMPAl^Y. 159 DESIGN No. 784, Face: Spun-Roll and Square Sink with Leaf. Sides : Plain, with Sunk Panel. N". B.— This Design is to be rcgrardcd as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. Scale : inch ■= 1 foot, DEPTH. *5in. Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width . . 5 in. 5 in. 5 in. 5 in. cut uud l)'ornieu Complete 1.52 2.00 1.54 2.06 1.62 2.2J 1.78 2.40 6ia. Projection .... 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Wid*h .... 5 in. 5 in. Sin. 1 5 in. Wilt and Former. Complete 1.60 2.22 1.66 2.32 1.75 2.50 1 94 2.74 Tin. Projection 10 Inches. 13 Inches. 13 Inches. 15 Inches. Face Width ... 5 in. 6 in. 5 in. 1.90 2.64 Bin. 1 98 2.74 5 in. 6 in. 5 in. 6 in. (Jut and Jb'ormeu Complete 1.80 2 48 1.88 2.56 2.00 2.78 2.10 2.92 2.12 3.00 2.18 3.16 S ia. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width .... 5 in. 6 in. 5in. 6 in. 5 in. 6 in. 5 in. 6 in. VvUt and Formeu Complete 2.00 2 7G 2 12 2.9U 2 18 3.02 2.28 3 14 2.32 3.24 2.i2 3.36 2.50 3 50 2.58 3.58 9 in. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width.... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 2 54 3.52 Bin. 2 62 3.60 7 in. 5in. 6 in. 7 in. Uut and Formeu Complete 2.23 3 02 2.32 3 16 2.38 3 22 2.40 3.30 2.46 3.38 2 54 3 46 2.68 3.68 2.68 3.74 2.76 3.82 2.84 3.94 10 in. Projection .... 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. Oi. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and i'ormeu Complete 2.46 3 34 2 5:! 3.42 2.6C 3.50 2 60 3.56 2.68 3.64 2.74 3.72 2.78 3 62 2.84 3.88 2.92 4.00 2.88 4.00 2.96 4.10 3. 06 4 22 11 in. Projection .... 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width .... G in. 7 in. ■ Sin. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 3 28 4 52 7 in. 3.36 4.60 8 in. Cut and I'oimcsc Complete 2.S2 3.82 2 90 3.1)2 3.00 4.04 2.94 4.00 3.02 4 08 3.12 4.20 3.08 4.22 3 16 4.32 3.28 4.44 3.48 4.72 12 ii. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. Sin. 6 in. 7 in. Sin. Cut and Formeu Complete 3. IS 4.24 3.24 4.34 3.34 4.44 3.32 4.50 3.40 4.58 3.50 4.68 3.54 4.82 3.60 4.88 3.72 5.00 3.68 5.04 3.76 5.12 3.86 5.22 '■ Sizes marked with a star are calculated without Top-Moulding. 160 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. DESIGN Wo. 785, Face: Smm-RoU and Square Sink with Leaf. Sides: Plain, with Sunk Scrolled-Panel and Stamped Ornament. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra In all cases. See Introductory Note, page 27. DEPTH. Projection .... 8 Inches, 9 Inches. 11 Inches. 13 Inches. Face Width . . . 5 in. 5 in. 5 in. 5 in. (Jut and Formed 1.64 2.18 1.66 2.24 1.76 2.38 1.94 2.t2 Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. 6ia. Face Width .... 5 in. 5 in. 5 in. 5 in. . Cut and Formeu 1.72 2.40 1.78 2.50 1.94 2 72 2.14 3.00 Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. 7 it. Face Width ... 5 in. 6 in. 5 in. 6in. 5 in. 6 in. 5 in. 6 in. Cut and Formed Complete 2.02 2 78 2.10 2.86 2.10 2.90 2.18 3.00 2 20 3.04 2 32 3.18 2 38 3.30 2.44 3 36 8 In. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width .... 5 in. Bin. Bin. 6 in. 5 in. 6 in. 5 in. 6 in. v_.ut and Formeu Coin plot© 2.20 3.02 2.32 3 16 2 46 3 36 2.56 3.48 2 60 3.56 2.70 3.68 2.76 3.82 2.84 3 90 9 in. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Pace Width. . . . 5 in. 6 in. 7 in. 5 in. 6 in. 7in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. o'ut und Foimeu Complete 2.50 3 38 2.60 3 5^ 2.66 3 58 2.65 3.62 2.72 3.70 2 80 3. 78 2 86 3.90 2 94 3.98 3 00 4.C6 3. 02 4.16 3.10 4.24 3.18 4.36 Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. ' 10 in. Face Width ... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. : (Jut and Formeu Complete 2.72 3 68 2.78 3. 75 2 86 3 e4 2 84 3 b6 2 92 3 94 2.98 4 02 3.10 4.X2 3.15 418 3 24 4.40 3.25 4.46 3. 34 4.56 3:44 - 4.68 Projection 16 Inches. r " Inches. 19 Inches. 21 Inches. ; 11 in. Face Width .... () i n . 7 in. Sin. 6 in. 7 in. 8 in. 6 in. 7in. 8 in. 6in. 7 in. 8 in. ' (Jut and Foiiuoo Complete 3.16 4.18 ZM 4.28 3.34 4.38 3.28 4.36 3.36 4 44 3.46 4 .54 3.45 4.6i> 3.54 4.68 3 66 4.80 3.7C 4 92 3.78 5 00 3 .90 : 5.12 Projection ' 18 Inches. 20 Inches. 22 Inches. 24 Inches. 12 in. Face Wiflth .... 6 in. 7 in. 8 in. 6in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. : \^\it and Formeu Complete 3.58 4.76 3.66 4.86 3.76 4.96 3.74 5.00 3.82 5.08 3.92 5.18 3.95 5 30 4.02 5.36 4.14 5.48 4.10 5.50 4.18 5.58 4 .28 ; 5.68 * Sizes marked with a star arc calculated without Top-Moulding. Scale : J| inch " i foot. THE KITTREDGE CORKICE AKD ORKAMEKT COMPANY. 161 DESIGN No. 786, Face: Spun-Roll and Square Sink with Leaf. Sides: Plain, with Incised-Work. N. B.— This Design is to b3 regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. 1 SCALK : }4 Inch = = 1 foot. DEPTH. Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width . . . 5 in. 5 in. 5 in. 5 in. uut and J?'ormeu Complete 1.60 2.16 1.64 2.26 1.75 2.48 1.92 2.74 6 In. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width 5 in. 5 in. 5 in. Sin. Cut aud li'ormeu Complete 1.66 2.30 1.72 2.42 1.85 2 66 2.02 2.92 7iE. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width .... 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. Cut and i^'ormeu 1.90 2 68 1.98 2.76 2.02 2.88 2.10 2.98 2 10 3.02 2.20 3.16 2.25 3.32 2.32 3.38 Sin. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. 6 in. Sin. 6 in. 5 in. 6 in'. 6 in. 6 in. \^ui ana Jj oimeu Complete 2.12 3.02 2.24 3 16 2 32 3.34 2.42 3.46 2 46 3.60 2.56 3.78 2.54 3.86 2.72 3 94 Sin. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. cut ana Foiinea Complete 2.38 3.42 2.48 3 56 2.54 3 62 2.56 3.70 2.62 3. 78 2 70 3.fc6 2 70 3.92 2.78 4.00 2.84 4.08 2.84 4.14 2.92 4.22 3.00 4.34 10 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formeu Complete 2.64 3.80 2.70 3.88 2.78 3.96 2 76 4.00 2 84 4.08 2.90 4.16 2.96 4.i;8 3.02 4.34 3.10 4.46 3.05 4.46 3.14 4.56 3.24 4.68 11 in. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7 in. Sin. 6 in. 7 in. 1 Sin. 6 in. 7 in. Sin. 6in. 7 in. Sin. Cut ana i^'orniet Complete 2.93 4.20 3.C6 4.30 3.16 4 40 3.10 4.38 3.18 4 46 3.28 4.56 3.25 4.62 3.34 4.70 3.46 4.&2 3.44 4.90 3.52 4.98 3.64 5.10 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. Sin. Cut and Foi-meu Complete 3.24 4.76 3.12 4.86 3.52 4.96 3.52 5.06 3.60 5.14 3.70 5.24 3 74 5.40 3.80 5.46 3.92 5.58 3.90 5.62 3.98 5.70 4.08 5. SO * Sizes marked with a star are calculated without Top-Moulding. 1G2 THE KITTEEDGE COEKICE AKD ORKAMEiq^T COMPAI^'Y. DESIGN No. 787. Face: Plain. Sides : Plain Voluted. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. Scale : inch = 1 foot , DEPTH. Projection .... 7 Inches. 8 Inches. 10 Inches. 12 Inches. Face Width .... 3 in. 4 in. 3in. 4 in. 3 in. 4in. 1 3 in. 4 in. Cut and Formed .32 .52 .32 .52 .32 .52 .34 .54 .36 .56 .38 .58 .38 .58 .40 .60 5 in. Projection .... 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width . . . 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. Cut and Forme.i .36 .60 .36 .60 .38 .62 .36 .60 .38 .62 .40 .64 .40 .66 .42 .68 .44 .70 .42 .68 .44 .70 .45 .72 6 in. Projection .... 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. 3 in. 4 in. 5 in. CutandFormeu Complete .52 .86 54 .88 .55 .91 .54 .90 .56 .94 .58 .96 .58 .98 .62 1 02 .64 1 04 .64 1.04 .65 1.06 .68 1.08 7 in. Projection .... 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width.... 4 in. 5 in. .62 1.04 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. *.>utan.i Formed Complete .58 1.00 64 1.06 .64 1.06 .66 1 08 68 1.10 .66 1.10 .68 1.12 .72 1.18 .72 1.18 .74 1.20 .76 1.22 8 in. Projection .... 12 Inches. 14 Inches. 16 Inches. 18 Inches. Fare Wi th 4in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. 4 in. 5 in. 6 in. cut and I'ormeu .68 1.12 70 1.16 .74 1.20 .74 1 20 .78 1 .24 .82 l.lO .82 1.32 .84 1.34 .88 1.40 88 1.40 .92 1.44 .94 1.46 9 in. Projection .... 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. G in. 7 in. 5 in G in. 7 in. 5 in. 6 in. 7 in. 5 in. .98 1.56 6 in. 1.02 1.60 7 in. cut and Formcu .78 1.28 .82 1.34 .84 1 36 .86 l.o8 .88 1.42 .92 1.46 .92 1.48 .95 1.52 .98 1.56 1 06 1.66 10 in. Projection .... 14 Inches. 16 Inches. 18 Inches. 20 Inches. Fare Width. . . 5 in. 6 in. .90 1.48 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. uut an » Formed Complete .88 1.44 94 1.52 .94 1.52 98 1.E6 l.CO 1 .60 1.04 1.66 1.05 1.68 1 10 1.74 1.10 l.';4 1.14 1.78 1.20 1.86 11 in. Projection .... 16 Inches. IT Inches. 19 Inches. 21 Inches. Face Width. . . . 6 in. 1.06 1.70 7 i'^. 8 in. 6 in. 7 in. 8 in. 1.16 1.82 6in. 1.20 1.90 7 i-. 8 in. 6 in. 7 in. 8 in. cut and J?ormed Complete 1.10 1.76 1 12 1.78 1.10 1.76 1 14 1 80 1 24 1.94 1 28 1 98 1.28 2.00 1.32 2.04 1.36 2.08 12 in. Projection .... 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width. . . Gin. 7 'n. Bin. 6 in. 7 in. 1 32 2.04 8 in. 6 in. 1.40 2.16 7 in. 1.42 2.18 8 in. 6 in. 7 in. 8 in. Cut and FormuL Complete 1.20 i.yo 1.24 1.94 1.28 1.98 1 28 2.00 1 36 2.08 1.48 2.24 1.48 2.24 1 52 2.28 1.56 2.32 THE KITTKEDGE CORi^ICE AND ORlsTAMEiq-T COMPANY. 163 DESIGN No. 788. Face: Plain, with Square Sink and Leaf. Sides: Plain, Voluted and Incised. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. Scale : Inch — 1 foot. DEPTH. Projection 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width . . . 5 in. 5 in. 5in. 5 in. 1 '11 i" 51 nH Ih^at'vii 1 v>U.U CilJl.4. JJVl lliV^U Complete .84 1.52 .88 1.62 1.00 1.86 1.16 2.12 6 in. 7 in. Projection — 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width — 5 in. 5 in. 5 in. 5 in. Complete 1.00 1.74 1.06 1.8iJ 1 20 2 10 1.35 2.36 Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width 5 in. 6 in. 5 i n. 6 in. 5 in. 6in. Bin. 6i . ( 11 Ji 'Mr'i l^^ot'nii Pi i Complete 1 14 2.04 1.22 2.12 1.26 2.24 1.34 2.34 1 34 2 40 1 44 2.54 1 50 2. 7 J 1.56 2.76 8 in. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. 1 iir tiTi*i Ti'iii'Tin 1 Complete 1.32 2.36 1.42 2.48 1 52 2 6S 1.60 2.78 1.66 2.96 1.74 3.06 1.84 3 22 1.90 3 28 9 in. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Wiilth 5 i n . 6 in. 7 in. 5 in. 6in. 7 in. 5 in. 6 in. 7 in. Bin. 6 in. 7 in. Complete 1.50 2.72 1.60 2 S6 1.66 2 93 1.68 3.00 1.74 3.08 1.82 3 16 1.82 3.24 1.90 3.32 1.96 3.40 1.96 S.46 2 04 3.54 2.12 3.66 10 in. Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width ... 5 in. f) in. 7 in. 5 i-. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. Cut and Formeu Complete 1.68 3.(i6 1.74 3.13 1 82 3.22 1 80 3.26 1 88 3.34 1.S4 3.42 2.02 3.58 2.08 3.64 2.16 3.76 2.12 3.76 2-20 3.t6 2.30 3.98 11 in. Projection .... 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. Cut and Foriuci Complete i.ae 2.C4 3.60 2 12 3 70 2 08 3.68 2.16 3.76 2.24 3.86 2.24 3.94 2 L2 4.04 2 42 4.14 2.42 4.24 2.50 4.32 2.60 4.42 12 in. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Wi.-lth .... r, i-. 7 i n. Si-. 6 in. 7 in. 8in. 6i-. 7 in. 8 in. 6 in. 7 in. 8 in. c.ut and Formeu 2.22 3.1)2 2.30 4.U2 2 40 4.12 2.40 4.23 2.48 4.3'J 2.53 4.40 2 62 4.58 2 63 4.64 2.80 4.76 2.78 4.80 2.86 4. 83 2.96 4.98 * Sizes marked with a star are calculated without Top-Moulding. 164 THE KITTKEDGE CORNICE AKD ORKAMEKT COMPANY. DESIGN No. 789, Face: Plain, with Square Sink and Leaf and Incised Drop. Sides: Plain, with Sunk Panel. N. B.— This Design is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patterns extra in all cases. See Introductory Note, page 27. Scale: Minch =lfoot. DEPTU. *5 in. Projection 8 Incues. 9 Inches. 11 Inches. 13 Inches. Face Width ... 5 in. Sin. 5 in. S in. l/Ut and i?'onuecl Complete .80 1.42 .82 1.48 .90 1 62 1.05 1.82 6 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width 5 in. S in. 5 in. S in. Cut and Formeu Complete .98 1.72 1.04 1.82 1.14 2 CO 1.32 2 24 7 in. Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width 5 in. 6 in. 5 in. 6 in. 5 in. 6in. i 5 in. 6 in. 1.48 2.52 Cut and Formed Complete 1.08 1 91) 1.18 2 02 1.18 2.16 1.28 2.20 1.28 2.20 1.40 2.38 1.40 2.42 Sin. Projection 12 Inches. 14 Inches. 16 Inches. j 18 Inches. Face Width 5 in. 6 in. Sin. 6 in. 5 in. 6 in. 5 in. 6 in. C/Ut and Formed Complete 1.26 2.16 1.38 2.32 1 44 2.42 1.54 2.56 1.58 2.64 1.68 2.78 _ 1.76 2.90 1.84 3.00 Sin. Projection 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width 5 in. 6 in. 7 in. 5 in. 6in. 7 in. Sin. 6 in. 7 in. Sin. 6 in. 7 in. (Jut and Formeu Complete 1.42 2 36 1.56 2 56 1.64 2 68 1.60 2.64 1.70 2.78 1.80 2 92 1.74 2.86 1.86 3. CO 194 3.14 1.88 3.08 2.00 3.22 2.10 3.40 10 In, Projection 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. S in. 6 in. 2.12 3.44 7 in. Cut and i'ormeo Complete 1.58 2.62 1.68 2. 76 1.80 2.90 1 72 2.84 1.84 2.98 1.94 3.12 1.90 3.10 2.00 3.22 2 12 3.40 2.00 3.28 2.25 3.62 11 ia. Projection 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width .... 6 in. Tin. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. "212" 3.76 6 i^. 7 in. 8 in. Cut and Formeu Complete 1.92 y.04 2.C4 3.22 2,14 3 36 2.04 3.22 2.16 3.38 2.25 3 52 2.18 3.44 2.30 3.6J 2.38 3 72 2.50 3.88 2.52 4.04 12 in. Projection .... 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width .... 6 in. 7 in. 8 m. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 i". 8 in. (Jut and Formed Complete 2.20 3.48 2.28 ^ 3.62 2.^ 3.76 2.36 3.74 2.44 3.86 2.56 4.00 2 58 4.06 ~"2"54~ 4.16 2". 78 4.32 2.72 4.26 2.80 4.38 2.92 4.52 Sizes marked with a star are calculated without Top-Moulding. THE KITTEEDGE CORKICE AKD ORKAMEi^^T COMPAis^Y. 165 Face : Plain, with Leaf and Incised-Drop DESIGN No. 790. Sides : Plain, with Incised-Work . N. B.— This Design Is to be regarded as a type of a class. The following figures are applicable to all Modillions possessing the same general features. Patteen"s extra in all cases. See Introductory Xote, page 27. Scale : Inch — 1 foot DEPTH. *5 in. Projection .... 8 Inches. 9 Inches. 11 Inches. 13 Inches. Face Width . . . 5 in. Sin. 5 ir». 5 in. Uut and i! ormeu Complete .83 1.58 .92 1.G8 1.04 1 90 1.20 2.16 6 in. 7 in. Projection 9 Inches. 10 Inches. 12 Inches. 14 Inches. Face Width .... 5 in. 5 in. 5 in. 5 in. Cut andFormeti 1.04 1.80 1.10 1.92 1.24 2.16 1.40 2 42 Projection 10 Inches. 12 Inches. 13 Inches. 15 Inches. Face Width ... 5 in. 6 in. 5 in. 6in. 5 in. 6in. 5 in. 6 in. Cut and Formed Complete 1 18 2.10 1.28 2.5i2 1.30 2.30 1.40 2.44 1 38 2.44 1.50 2.62 1.54 2.74 1.62 2.84 Sin. Projection 12 Inches. 14 Inches. 16 Inches. 18 Inches. Face Width .... 5 in. Bin. 5 in. 6 in. 5 in. 6 in. 5 in. 6 in. cut and Formed 1.33 2.42 1.50 2.58 153 2.74 1.63 2.88 1.72 3. CO 1.82 3.14 1.90 3.26 1.98 3.36 9 in. Projection .... 13 Inches. 15 Inches. 17 Inches. 19 Inches. Face Width.... 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 5 in. 1.90 3.26 6 in. 7 in. 5in. 6 in. 7 in. Cut and Formed Complete 1.58 2.76 1.72 2.96 1.80 3.08 1.76 3.04 1.86 3.18 1.96 3.32 2.02 3.40 2.10 3.54 2.04 3.48 2.16 3.62 2.26 3.80 10 in. Projection .... 14 Inches. 16 Inches. 18 Inches. 20 Inches. Face Width .... 5 in. 6 in. 1.86 3.22 7 in. 5 in. 6 in. 7 in. 5 in. 6 in. 7 in. 2.30 3.86 5 in. 6in. 7 in. Cut and J)'ormed Complete 1.76 3.08 1.98 3.36 1 33 3.28 2 00 3.42 2.10 3.56 2.08 3.56 2.18 3.68 2.13 3.74 2.30 3.90 2.44 4.08 11 ia. Projection .... 16 Inches. 17 Inches. 19 Inches. 21 Inches. Face Width 6 in. 7 in. Sin. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 2.66 4.34 Sin. 2.78 4.50 Cut and Forniea Complete 2 03 3.43 2.2C 3.66 2 30 3.80 2.20 3.66 2.32 3.82 2.42 3.96 2.36 3.90 2.48 4.06 2.60 4.22 2.54 4.18 12 ia. Projection 18 Inches. 20 Inches. 22 Inches. 24 Inches. Face Width .... 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. 6 in. 7 in. 8 in. cut and Formed Complete 2.38 4.00 2 46 4.14 2.53 4.28 2.56 4.30 2.64 4.43 2.76 4.56 2 78 4.64 2.84 4.74 2.98 4.90 2.94 4.86 3.02 4.98 3.14 5.12 Sizes marked -with a star are calculated without Top-Moulding. 166 THE KITTREDGE COEKICE AND ORl^^AMENT COMPANY. SHEET-METAL DENTILS. Scale of Designs 1 inch - 1 foot. In Dentils there is but very little room for display and ornamentation. The styles presented below cover all the kinds In most common use, while it Is believed that the range of sizes given will be found sufficiently extended for all ordinary requirements. In construction, the smaller sizes are ordinarily made to solder against the Mouldings, while the larger sizes are arranged with flanges, turned out for riveting. Price of intermediate Designs may be determined by comparison. Square, with Plain Face and Sides. No. 972. Square, with Plain Face. Sides cut to Profile of Dentil- Course. Plain Cove Face and Plain Sides. No. 974. Cove Face, with SquareHSink. Plain Siaes. No. 973. Cove Face, with Square Raise. Plain Sides. No. 971. Plain O. G. Face. Plain Sides, cut to Profile of Dentil-Course. No. 969. Depth Proj ection . . Face Width. Cut and Formed . Complete Depth Projection . . Face Width. Cut and Formed . Complete Depth Projection . . Face Width. Cut and Formed . Complete Depth Projection . . Face Width Cut and Formed. Complete Depth Projection . . Face Width Cut and Formed. Complete Depth Projection . . Face Width Cut and Formed. Complete 2 in. 2 in. 3 in. 2 " .14 3 in. 2U " 3 in 2i ,; " 3 in. 23.^ " .14 .30 3 in. .13 .22 4 in. 2 " 2M " 4 in. 2 " 4 in. 3 " 3 4 in, 3 " 3 " .18 4 in. 3 «' 3 .13 .38 4 in. 3 " 3 " 5 in. 5 in. 2>a' " 5 in. .13 .30 5 in. .24 .48 5 in. 3>2 " .24 .48 5 in. " .20 .32 .16 .28 6 in. 3 " 4 " 6 in. 4 " 4 " 6 in, 4 " 4 " .30 .58 6 in. 4 " 4 " 7 in. 3K " 4}4 « 7 in. 4}4 " 7 in. 5 " 4K .44 7 in. 5 " 43.' 7 in. 5 " 4}i " 7 in. 5 " 4}i " .32 .48 THE KITTKEDGE CORKICE AKD ORNAMEIsT COMPANY. 167 TRUSSES AND STOP-BLOCKS.^ The term Truss, in Architectural Sheet-Metal Work, has been applied to those large termi- nal structures, like brackets in general shape, whose depth and projection are such as to permit of the mouldings of the cornice ending against them. The term Stop-Block is used to designate a block placed above an ordinary bracket, or pair of brackets, against which the mouldings of the upper part of a cornice terminate. Both Trusses and Stop-Blocks are of very common occurrence in the architecture of street fronts. We present a few of the most frequently used patterns, with a range of sizes which we believe will be found suflQciently comprehensive for all practical purposes. The dimensions of Trusses and Stop-Blocks in the following tables are based upon the size of the cornice, as is expressed in each table. Each design presented may be regarded as a type of a class. The same material, labor, and amount of ornamentation, although the relative arrangement of the parts may be diflerent, will be priced at the same figure. All extra for patterns is chargeable against Trusses and Stop-Blocks, the same as against Brackets, and at proportionate rates. We annex tables of extras, to which the reader is referred. The first five designs here presented, namely, lumbers 697, 9G0, 959, 961 and 902, are in de- signs and sizes calculated especially for Lintel Cornices. PRICE LIST OF EXTRAS FOR SHEET-METAL TRUSSES. DESIG2T NUMBERS. 088 093 094 959 9G0 097 901 940 092 9UU 904 9.yj !.99 ir'ATTEBNs lor citixer size of the above \ .75 .90 1.05 1.20 1.35 1.50 1.65 2.75 Drawings, with cut and lormed work, ? eith-^r size of the ahove Dcsijrns ... 5 .37 .43 .50 .60 .65 .75 .80 1.37 PRICE LIST OF EXTRAS FOR SHEET-METAL STOP-BLOCKS. DESIGN" NUMBERS. 08.3 091 lis m 111 090 Patterns lor either size of the above ) Desiarns ( .50 .65 .80 .85 l.CO Drawings, with cut and lormed worJi, i either gfze of the above Desiijps. . . { .25 .33 .40 .45 .50 168 THE KITTREDGE CORKICE AKD ORKAMEKT COMPAI^^Y. DESIGN No. 697. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. ^3 Scale : \i inch =■ 1 foot. Dimensions of Cbown Depth. 18 in. 18 in. 21 in. 24 in. 24 in. 27 in. Projection. 9 in. 10 in. 10 in. 12 in. 14 in. 16 in. Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Face Width of Truss. 10 in 2.25 3.58 2.43 3.78 2.64 4.06 3.09 4.65 3.33 4.94 S.81 5.55 12 in. 2.53 3.91 2.73 4.13 2.98 4.46 3.51 5.13 3.79 5.47 4 35 6 17 14in, 2.81 4.24 3.03 4.48 3.32 4.86 3 93 5.62 4.25 6.00 4.89 6.79 DESIGN No. 960. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale : inch = 1 foot. Dimensions of Ckown. Depth. 18 in. 18 in. 21 in 24 in. 24 in. 27 in. Projection. 10 in. 10 in. 12 in. 14 in. 16 in. Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Cjmplete Cut and Formed Complete Cut and Formed Complete Face Wibth of Tbuss. 10 in, 2.05 3.18 2.23 3.28 2.44 3.46 2.79 4.05 3 03 4 34 3.41 4.75 12 in. 2 29 3.41 2.46 3.53 2.74 3.81 3.11 4.43 3.39 4.77 5.27 14in. 2.51 3.64 2.73 3.88 3.02 4.26 3.43 4.82 3.75 5.20 4.29 5 79 THE KITTKEDGE CORKICE AKD ORI^AMEJfT COMPAJnT. 169 Dimensions of Crown. DESIGN No. 961. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra In all cases. ScALB : M inch = 1 foot. Depth. 18 in. 18 in. 21 in. 24 in. 24 in. Projection. 0 in. 10 in. 10 in. 12 in. 14 in. 27 in. 1(5 in. Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Face Width of Texjss. 10 in. 2.25 3.58 2 43 3.78 2.64 4.06 3.09 4.65 3.33 4.94 3.81 5.55 12 in. 2.58 3.91 2.73 4.13 2 98 4 46 3.51 5.13 3.79 5.47 4 35 6 17 14in. 2.81 4.24 3.C3 4.48 3 32 4.86 3 93 5.62 4.25 6.00 4.89 6.79 DESIGN No fl'SQ This Design maybe regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale : M inch = 1 foot. Dimensions or Cbown. Depth. 18in. Projection. 18 in. 21 in 24 in. 9 in. 10 in, 10 in. 12 in. 24 in. 14 in. 27 in. 10 i a. Face "Width of Truss. 10 in. 12 in. 14in. Cut and Formed . Complete 2 05 3.18 2 29 3.41 2.51 3.64 Cut and Formed. Complete 2 23 3.28 2.46 3.53 2.73 3 88 Cut and Formed . Complete 2,44 3.46 2.74 3.81 3.02 4.26 Cut and Formed . Complete 2.79 4.05 3 11 4.43 3.43 4.82 Cut and Formed . Complete 3.03 4 34 3.39 4.77 3.75 5.20 Cut and Formed. C )mplete 3.41 4.75 3.85 5.27 4.29 5 79 170 THE KITTREDGE CORKICE AKD ORKAMEKT COMPANY. DESIGN No. 694. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale : inch = 1 foot. Dimensions of Crown. Face Width of Truss. Depth. Projection. lOin. 12 in. 14 in. 24 in. 16 in. Cut and Formed . Complete 2.26 3.46 2.46 3.68 2.66 3.90 24 in. 17 in. Cut and Formed . Complete 2.20 3.40 2.40 3.62 2.60 3.84 27 in. 18 in. Cut and Formed. Complete 2.61 3.93 2.82 4 16 3.03 4.39 30 in. 16 in. Cut and Formed . Complete 2.56 3.88 2.77 4.11 2 98 4.34 30 in. 20 in. Cut and Formed. Complete 2.97 4.39 3.19 4.63 3.41 4.87 33 in. 18 in. Cut and Formed. 2.93 4.37 3 15 4.61 3.37 4.85 33 in. 22 in. Cut and Formed . Complete 3.34 4.88 4.57 5.13 3.80 5.38 30 in. 20in. Cut and Formed. 3.31 4.87 3.54 0 .X/l 3.77 5.37 36 in. 22 in. Cut and Formed . 3.53 5.13 3.77 5.39 4.01 5.65 30 in. 24 in. Cut and Formed. Complete 3 72 5.38 3.97 5.65 4 22 5.92 39 in. 24 in. Cut and Formed . Complete 3.90 5.62 4.16 5.90 4.42 6.18 39 in. 26 in. Cut and Formed. Complete 4.11 5.87 4.33 6.16 4.65 6.45 42 in. 26 in. Cut and Formed. 4.30 6.14 4.58 6.44 4.86 6.74 42 in. 28 in. Cut and Formed . Complete 4 51 6.39 4.80 6.70 5.09 7.01 45 in. 28 in. Cut and Formed. Complete 4.71 6.67 5.01 6.99 5 31 7.31 45 in. 30 in. Cut and Formed . Complete 4.92 6.92 5.23 7.25 5.54 7.58 48 in. 30 in. Cut and Formed . Complete 5.13 7.21 5.45 7.55 5.77 7.89 DESIGN No. 688. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale : M inch = 1 foot. Dimensions of Crown. Face Width of Triss. Depth. Projection. 10 in. 12 in. 14in. 36 in. 20 in. Cut and Formed . Complete 4 76 6.63 4.99 6.92 5 26 7.18 5.76 7.73 36 in. yi-i: in. Cut and Formed . Complete 5.51 7.49 6.03 8.06 39 in 22 in. Cut and Formed. 5.22 7.23 5.76 7.82 6.30 8.41 42 in. 24 in. Cut and Formed . 5.69 7.84 6.27 8.47 6.85 9.10 42 in. 26 in. Cut and Formed. Complete 5 93 8 14 6.53 8.79 7.13 9.44 45 in. 26 in. Cut and Formed . Complete 6.17 8.46 6.79 9.13 7 41 9.80 48 in. 28 In. Cut and Formed . 6.66 9.09 7.32 9.80 7 98 :o.5i 51 in. 30 in. Cut and Formed . 7.16 9.73 7.86 10.48 8.56 11.23 54 in. 30 in. Cut and Formed . Complete 7.41 10.04 8.13 10.81 8.85 11.58 57 in, 32 in. Cut and Formed . 7 93 10.70 8.69 11.51 9.45 12.32 60 in-. 32 in. Cut and Formed . Complete 8.19 11.02 8.97 11.85 9.75 12 68 THE KITTREDGE COIIIn"ICE AXD OIIJ^AMEKT COMPANY. 171 DiMEKSIONS OF CROWX DESIGN No. 693. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale : 34 inch = 1 foot. Depth. 24 in. 27 in. 27 in. 30 in. 33 in. 36 in. in. 39 in. 39 in. 42 in. 42 in. 42 in. 45 in. 45 in. 45 in. 48 in 48 in. 48 in. 51 in. Projection. 16 in. 14 in. 18 in. 16 in. 20 in. 18 in. 22 in. 24 in. 24 in. 26 in. 24 in. 26 in. 28 in. i6 in. 28 in. 30 in. :6iD. 30 in. 32 in. 30 in. Cut and Formed. Complete Cut and Formed . Complete Cut and Formed . Complete Cut and Formed . Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed . Complete Cut and Formed. Complete Cut and Formed . Complete Cat and Formed G >mplete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed . Complfte Cut and Formed. (Jomp f'te Cut and Formed. Com])1e>-e Cut and Formed Complete Cut and Formed Complete Face Width of Truss. 10 in. 3.33 4.69 3.30 4.66 3.74 5.24 3.72 5.22 4.16 5.78 4.15 5.79 4.59 6.34 4.59 6.36 4.83 6.65 5 03 6.91 5.26 7.21 5.48 7.47 5.50 7.49 5.72 7.80 5.94 8.U6 5.95 8.07 6.19 8.40 6.41 8.66 6 20 8 30 6.67 9.01 6.89 9.27 6.67 8 99 7.15 9.60 12 in. 3.77 5.18 3.74 5.15 4.20 5 75 4.18 5.73 4 64 6.31 4.63 6 32 5.09 6.89 5.09 6.91 5.35 7.22 5.56 7.49 5.81 7.81 6.04 8.08 6.06 8.10 6.30 8.43 6.80 9.06 7.03 9.33 6.81 9.05 7.31 9.70 7.54 9.97 14 in. 4.22 5.68 4.19 5.65 4.67 6.27 4.65 6.25 5.13 6.85 5.12 6.86 5.60 7.45 5.60 7.47 5.88 7.80 6.10 8.08 6.37 8.42 6.61 8.70 6.63 8.72 6.89 9.07 7.13 9.35 7.14 9.36 7.42 9.73 7.66 10.01 7.43 9.72 7.96 10.40 7.31 9.68 7.81 10.31 8.20 10.68 7.96 10.38 8.48 11 .03 DESIGN No. 692. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale : inch = 1 foot. Dimensions of Ckown. Depth. 30 in. 33 in. 30 in 39 in. 42 in. 45 in. Projection. 18 in. 20 in. 22 in. 24 in. 24 in. 48 in. 28 in. 51 in. 54 in. 30 in. 30 in. Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Face "Widtu of Tklss. 10 in. 6 04 7.97 6 54 8.64 7.06 9.33 7.60 10.04 7.89 10 41 8.45 11.14 9.03 11,89 9.63 12.66 9.93 13.04 12in. 6 49 8.50 7. 01 9.19 7.55 9.90 8.11 10.63 8.42 11.02 9.00 11.77 9.60 12 .54 10 22 13.33 10.54 13.73 14in. 6.94 9.03 7.43 9.74 8.04 10.47 8.62 11,22 8.95 11.63 9 55 12 40 10 17 13.19 10.81 14.00 11.15 14.42 172 THE KITTREDGE COEI^ICE AKD ORN"AMENT COMPANY. DESIGN No. 686. This Design may be regarded as a type of a class. The fol- lowing ligures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale Dimensions op Crown. Face Width of Tkuss. Depth. Projection. 10 in. 12 in. 14in. 27 in. 14 in. Cut and Formed . Complete 3.29 4.79 3.58 5.16 3.87 5.53 30 in. 1 p. in ID in. Cut and Formed . Complete 3.68 5.32 3.99 5.71 4.30 6.10 o6 in. 18 in. Cut and Formed . Complete 4.08 5.86 4.41 6.27 4.74 6.68 oo m. 20 in Cut and Formed . Complete 4.49 6.41 4.84 6.84 5 19 7.27 QR 5v\ oo in. 22 in. Cut and Formed . Complete 4.70 6.68 5.05 7.12 5.42 7.56 39 in. 22 in. Cut and Formed . Complete 4.91 6.97 5.28 7.42 5.65 7.87 39 in. 24 in. Cut and Formed . Complete 5.13 7.25 5.51 7.71 5.89 8.17 42 in. 24 in. Cut and Formed . 5.34 7.54 5.73 8.01 6.12 8.48 42 in. 26 in. Cut and Formed . Complete 5.57 7.83 5.97 8.31 6.37 8.79 45 in. 26 in. Cut arid Formed. Complete 5 78 8.12 6.19 8.61 6.60 9.10 45 in. 28 in. Cut and Formed . 6.02 8.43 6.44 8.92 6.86 9.42 48 in. 28 in. Cut and Formed. Complete 6.23 8.71 6.66 9.22 7.09 9.73 48 in. 30 in. Cut and Formed. 6.48 9.02 6.92 9.54 7.36 10.06 51 in. 30 in. Cut and Formed. Complete 6.69 9.31 7.14 9.84 7.59 10.37 54 in. 30 in. Cut and Formed . Complete 6.93 9.63 7.40 10.18 7.87 10.73 DESIGN No. 904. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale : M Inch = 1 foot Dimensions of Crown , Depth. 36 in. 39 in. 42 in 42 in. 45 in. 45 in. 48 in. 51 in. 54 in. Projection. 20 in. 22 in. 22 in. 24 in. 24 in. 26 in. 26 in. 28 in. 30 in. Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Face Width of Trl'SS. 10 in. 7 82 11.47 8.39 12.29 8.68 .2.70 8.97 13.12 9.56 13.96 9.87 14 39 10.48 15.25 11.10 16.12 12in 8 37 12.10 8.97 12.95 9.27 13.37 9 58 13.81 9.89 14 24 10.20 14.68 10.52 15.12 11.16 16.01 11.81 16.91 14 in. 8.92 12.73 9.55 13 61 9.85 14. C4 10.19 14.50 10.51 14.94 10 84 15 40 1117 15.85 11.84 16.77 12.52 17.70 THE KITTKEDGE CORNICE AXD ORI^^AMEKT COMPAJTT DESIGN No. 946. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale: M inch = 1 foot. Dimensions of Ckown Depth, 36 in. 42 in. 42 in. 45 in. 45 in. 48 in. 54 in. Projection, 20 in. 22 in. 22 in. 24 in. 24 in. 26 in. 28 in. Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Face Width op Tkxjss. 10 in, 5.69 8.96 6.47 10.03 87 10.57 7.26 11.11 7.66 11.65 8.06 12.20 46 12,74 9.27 13.84 10.09 14.95 12 in, 6,05 9.40 6.85 10.49 7.26 11.04 7.66 11.59 8.07 12.14 8 48 12,70 8.89 13 25 9.72 14.37 10.56 15.50 14 in. 6.41 7.23 10.95 7.65 11.51 8 06 12.07 8.48 12.63 8.90 13.20 9 32 13.76 10.17 14.90 11.03 16.05 DESIGN No. 899. This Design maybe regard- ed as a type of a class. The following figures are appli- cable to all Trusses possess- ing the same general fea- tures. Patterns extra in all cases. Scale : % inch ■= 1 foot. Dimensions of Crown. Face "Width of Truss. Depth. Projection. 10 in. 12in. 14in. 42 in. 22 in. Cut and Formed . Complete 7 86 12.66 8.39 13.27 8.92 13.88 42 in. 24 in. Cut and Formed . Complete 8.16 13.11 8.72 13.75 9.28 14,39 45 in 24 in. Cut and Formed . Complete 8.49 13.60 9.07 14.26 9.65 14.92 48 in. 26 in. Cut and Formed . Complete 9.13 14.56 9.75 15.26 10 37 15.96 51 in. 26 in. Cut and Formed . Complete 9.44 15 02 10.09 15.75 10.74 16.48 54 in. 28 in. Cut and Formed . Complete 10 10 16.00 10 79 16,77 11.48 17 54 57 in. 28 in. Cut and Formed . Complete 10.42 16.47 11.14 17 27 11 86 18.07 60 in. 30 in. Cut and Formed . 11 10 17.47 11.86 18.31 12.62 19.15 63 in. 32 in. Cut and Formed . Complete 1179 18.48 12.59 19.36 13 39 20.24 66 in. 34 in. Cut and Formed . Complete 12.49 19.50 13,33 20.42 14.17 21.34 174 THE KITTREDGE CORKICE AKD ORNAMEKT COMPANY. Dimensions of Ckown. DESIGN No. 950. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale : inch = 1 foot. Depth. 42 in. 42 in. 45 in. 51 in. Projection. 24 in. 24 in. ^6 in. 26 in. 54 in. ;s iu. 57 in. 60 in. 03 in. 66 in. S8 in. 30 in. 32 in. 34 in. Face Width of Tktjss. 10 in. 12 in. 14 in. Cut and Formed . Complete 10.69 15.07 10 92 15.98 11.72 16.89 Cut and Formed. Complete 10.43 15.53 11.26 16.47 12.10 17.42 Cut and Formed . Complete 10 77 16.04 11.63 17 01 12.49 17.98 Cut and Formed . Complete 11.43 17.03 12.35 18.06 13 27 19.09 Cat and Formed. Complete 11.75 17.50 12 70 18.56 13.66 19.63 Cut and Formed. 12 43 18.51 13.44 19.63 14.46 20.76 Cut and Formed. ;i2.76 18.09 13.81 20.15 14.86 21.31 Cut and Formed . Complete 13.46 20.02 14.57 21.24 15.68 22.46 Cut and Formed . Complete 14.17 21 .06 15.34 22.34 16.51 23.62 Cut and Formed . Complete 14.89 22.11 1612 23.45 17 35 24.79 DESIGN No, 900 This Design may be re- garded as a type of a class. The following fig- ures are applicable to all Trusses possessing the same general features- Patterns extra In all cases Scale : U inch = 1 foot. Dimensions of Ceown Depth. Projection. 42 in. I 22 in. 42 in. 24 in. 45 in 48 in. 26 in. 51 in. £0 in. 54 in. £8 in. 60 in. 63 in. 60 in. 28 in. 30 in. 32 in. .34 in. Face Width of Teuss. 10 in. 12in. 14in. Cut and Formed . Complete 8.55 13.14 9 50 14.20 10.45 15.26 Cut and Formed . 8.93 13.69 9.91 14.78 10.89 15,87 Cut and Formed. Complete 9.36 14.30 10.35 15.40 11.34 16.50 Cut and Formed . Complete 10.17 15.46 11 20 16.60 12.23 17.74 Cut and Formed . Complete 10.58 16 04 11.64 17.21 12.70 18.38 Cut and Formed . 11.40 17.21 12.50 18.42 13.60 19 63 Cut and Formed . Complete 11.82 17.79 12.94 19 02 14.06 20.25 Cut and Formed. Complete 12 66 18.98 13.82 20.25 14.98 21.52 Cut and Formed . 13 52 20.19 14.72 21 .50 15 92 22.81 Cut and Formed . Complete 14.39 21.41 15.63 22.76 16.87 24.11 THE KITTREDGE CORNICE AXD ORJ^AMEi^T COMPANY. 175 DESIGN No. 962. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Trusses possessing the same general features. Patterns extra in all cases. Scale : M inch — 1 foot. Dimensions op Crown. Face Width of Tbuss. Depth. Projection. 10 in. 12 in. 14 in. IS in. 9 in. Cut and Farmed 2 15 3.38 2,41 3.66 2.66 3.«J4 18 in. 10 in. Cut and Formed . Complete 2.33 3.58 2,61 3,88 2.88 4.18 21 in. 10 in. Cut and Formed . 2.54 3.86 2.86 4 16 3.17 4.56 ?4 in. 12 in. Cut and Formed 2.94 4.35 3,31 4,78 3.68 5.22 24 in. 14 in. Cut and Formed. 3.18 4.64 3,59 5.12 4.0D 5.6U 27 in. 10 in. Cut and Formed . Complete 3.61 5.15 4.10 5.72 4 59 6 29 DESIGN No. 690. This Design may be regarded as a type of a class- The fol- lowing figures are applicable to all Stop-Blocks possessing the same general features. Patterns extra in all cases. Scale : H Inch = 1 foot. Dimensions op Cbown- moulding. Depth of Stay. 9X in. 9X in. 11}2 in. Projection from Wall. 18 in. 20 in. 22 in. 21 in. 11>2 in. 13 in. 13 in. 20 in. 28 in. 30 in. Cut and Formed Complete Cut and Formed Complete Cut and Formed C omplete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Width op Face of Stop-Block. 12 in, 2 27 4.H 2 37 4,26 2 47 4.38 2 93 5.06 3,04 5.19 3 51 5.89 3 63 6 01 15in. 2 48 4 45 2 59 4.L8 2 70 4.71 3.17 5.41 3 29 5 55 3 70 6.2.J 3 r2 ISin 2 81 4.90 2 93 5.L4 3 41 5.76 3.^4 5.9i 4.06 6 09 4 ^1 ( .E5 176 THE KITTREDGE COENICE AKD OE]S"AMEHT COMPANY. DESIGN No. 687. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Stop-Blocks possessing the same general features. Patterns extra in all cases. inch = 1 foot. Dimensions of Crown- Moulding. Depth of Stay. 6 in. 7X in. 7X in. 9JS^ in. 9X in. 9}i in. 9K in. 9X in. 10>^ in. lOK in. lOK in. lOK in. Projection from Wall. lOM in. 11}4 in. IIK in. UK in. 11% in. 13 in. 13 in. 14 in. IG in. IS in. 20 in. 22 in. 18 in. 20 in. 22 in. 24 in. 26 in. 20 in. 22 in. 24 in. 26 in. 28 in. 24 in- 26 in. 30 in. 28 in. 30 in. Cut and Tormed Ckjmplete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed . Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cat and Formed Complete Width of Face of Stop-Block. Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Xii in. 15 in. 18 in. 1.17 2.08 1.34 2.33 1.51 2.58 1.23 2.17 1.41 2.43 1.59 2.69 1.49 2.50 1.69 2.78 1.89 3.06 1.55 2.60 1.77 2.89 1.98 3.18 1.63 2.70 1.85 3.00 2.07 3.30 1.80 2.91 2.01 3.20 2.22 3.49 1.87 3.01 2.09 3.31 2.31 3.61 1,94 3.11 2 17 3.42 2.40 3.73 2.01 3.21 2.25 3.53 2.49 3.85 2.08 3.31 2.33 3.64 2.58 3.97 2.11 3.33 2.33 3.63 2.55 3.93 2.19 3.44 2.42 3.75 2.65 4.06 2.27 3.55 2.51 3.87 2.75 4.19 2.35 3.66 2.60 3.99 2.85 4.32 2.43 3.77 2.69 4.11 2.95 4.45 2.32 3.62 2.56 3.94 2.80 4.26 2.40 3.73 2.65 4.06 2.90 4.39 2.48 3.84 2.74 4.18 8.00 4.52 2.56 3.95 2.83 4.30 3.10 4.65 2.75 4.21 3 02 4.56 8.29 4.91 2.83 4.32 3.11 4.68 3.39 5.04 DESIGN No. 691. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Stop-Blocks possessing the same general features. Patterns extra tn all cases Scale: Minch^ foot. Dimensions of Crown- Moulding. Width of Face or Stop-Block. Depth of Stay. Projection from Wall. 12 in. ID in. 10 in. 6 in. 14 in. Cut and Formed . Complete .98 1.57 1.18 1.83 1.38 2.09 6 in. 16 in. Cut and Formed . 1.05 1.66 1.26 1.93 1.47 2.20 7)^ in. 16 in. Cut and Formed . 1.15 1.80 1.36 2.07 1.57 2.34 7^4 in. 18 in. Cut and Formed . Complete 1.21 1.88 1.44 2.17 1.67 2.46 714' in. 20 in. Cut and Formed . Complete 1.27 1 96 1.51 2 26 1.75 nyi in. 22 in. Cut and Formed . Complete 1.34 2.05 1.59 2.36 1.84 2.67 9>^in 20 in. Cut and Formed. Complete 1.43 2.18 1.67 2.48 1.91 2.78 9)^ in. 22 in. Cut and Formed . 1.50 2.27 1.75 2.58 2.00 2.89 91^ in. 24 in. Cut and Formed . 1.57 2.36 1.83 2.68 2.09 3.00 9>i in. 26 in. Cut and Formed . Complete 1.64 2.45 1.91 2.78 2. 18 3.11 1132 in. 26 in. Cut and Formed . Complete 1.83 2.68 2.11 3.02 2.39 3.36 UK in. 28 in. Cut and Formed . Complete 1.90 2 77 2.19 3.12 2.48 3.47 UK in. 30 in. Cut and Formed. Complete 1 97 2.86 2.27 3.22 2.57 - 3.58 11 X in. 32 in. Cut and Formed . Complete 2.04 2.95 2.35 3.32 2.66 3.69 THE KITTREDGE CORKICE AKD ORiq-AMENT COMPANY. 177 DESIGN No. 689. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Stop-Blocks possessing the same general features. Patterns extra in all cases. Scale : H Inch = 1 foot. DiMENSTOKS OP CROWN- MOULDING. Depth of Stay. 1)4, in. in. 9jS^ in. in. 9>^ in. 93^ in. 9)^ in. in. UK in. UK in. 13 in. Projection from "Wall. 14 in. IG in. 22 in. 18 in. 20 in. 22 in. 24 in. 26 in. 26 in. 28 in. 30 in. 30 in. Width of Face of Stop-Block. 12 in. 15 in. ISin. Cut and Formed . 1.42 2.34 1.71 2.73 2.00 3.12 Cut and Formed Complete 1.61 2.59 1.92 3.00 2.23 3.41 Cut and Formed . 1.77 2.81 2. 10 3.24 2.43 3.67 Cut and Formed Complete 1 85 2.92 2.19 3.36 2.53 3.80 Cut and Formed Complete 1.92 3.01 2.25 3.44 2.58 3.87 Cut and Formed . 2.00 3.12 2 34 3.56 2.68 4.00 Cut and Formed . 2.08 3.23 2.43 3.68 2.78 4.13 Cut and Formed 2.16 3.34 2.52 3.80 2.88 4.26 Cut and Formed . 2.24 3.45 2.61 3.92 2.98 4.39 Cut and Formed. Complete 2.47 3.76 2 84 4.23 3.21 4.70 Cut and Formed . 2.55 3.8t 2.93 4.35 3.31 4.83 Cut and Formed . Complete 2.63 3.98 3.02 4.47 3 41 4.96 Cut and Formed. 2.82 4.25 3.23 4.76 3.64 5.27 DESIGN No. 685. This Design maybe regarded as a type of a class. The fol- lowing figures are applicable to all Stop-Blocks possessing the same general features. Patterns extra In all cases. Scale : H incl^ = 1 foot. Dimensions of Crown- Moulding. Width op Face of Stop-Block. Depth of Stay. Projection from Wall. 12 in. 15 in. 18in. l)i in. 16 in. Cut and Formed . Complete 1.53 2.24 1.80 2.59 2.07 2.94 7K in. 18 in. Cut and Formed . 1.59 2.32 1.83 2.69 2.17 3. 16 9)4 in 20 in. Cut and Formed . 1.81 2.62 2 11 3.00 2.41 3.38 9*4 in. 22 in. Cut and Formed . Complete 1.88 2.71 2 19 3.10 2.50 3.49 9)^ in. 24 in. Cut and Formed. Complete 1.95 2,80 2.27 3.20 2.59 3.60 UK in. 26 in. Cut and Formed . 2.21 3.12 2.55 3.54 2.89 3.96 UK in. 28 in. Cut and Formed . 2 28 3.21 2.63 3.64 2.98 4.07 11>2 in. 30 in. Cut and Formed . Complete 2.35 3.30 2.71 3.74 3.07 4.18 11>^ in. 32 in. Cut and Formed Complete 2.42 3.39 2.79 3.84 3. 15 4.29 178 THE KITTKEDGE CORKICE A^D ORKAMEKT COMPANY. DESIGN No. 948. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Stop-Blocks possessing the same general features. Patterns extra in all cases. Scale : M inch = 1 foot. Dimensions of Crown Moulding. Depth of Stay. 8X in. 8X in. 10 in. 10 in. 12 in. 12 in. 12 in. 12 in. Projection from Wall. 22 in. 24 in. 26 in. 28 in. 28 in. 32 in. 34 in. Cut and Formed Complete Cut and Formed Complete Cnt and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Width of Face of Stop-Block. 12 in. 5.00 1.08 5.12 7.20 5.62 8.02 5.74 8.18 6.34 8.98 6.46 9.16 6.60 9.36 6.72 9.54 15 in. 5 42 7.60 5.54 7.72 6.06 8.56 6.20 8.74 6 80 9.56 6 94 9.76 7.08 9.94 7.22 10.14 18in, 5.84 8.12 8.24 6.50 9.10 9.30 7.26 10.14 7.42 10.36 7.56 10.52 7.72 10.74 DESIGN No. 947. This Design maybe regarded as a type of a class. The fol- lowing figures are applicable to all Stop-Blocks possessing the same general features. Patterns extra in all cases. Scale: i| inch = 1 foot. Dimensions of Ckown- moulding. Depth of Projection Stay. from Wall. 20 in. 7V in. Qii in 9M in. 9X in. 11 }4 in. UK in. 22 in. 22 in. 24 in. 26 in. 28 in. 30 in. Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Width of Face of Stop-Block. 12 in. 1 68 3.04 1.75 3.14 2.03 3.53 2.12 3.67 2.21 3 79 2.60 4.34 2.70 4.47 15 in. 1 91 3.39 1.99 3.50 2.28 3.92 2.38 4.05 2.48 4.18 4.74 .99 18 in 2.14 3.74 2.23 3.86 2.53 4.29 2.64 4.43 2.75 4.57 3.16 5.14 3.28 5.29 THE KITTEEDGE CORNICE AKD ORIsAMEKT COMPANY. 179 DESIGIiJ" No. 901. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Stop-Blocks possessing the same general features. Patterns extra in all cases. Scale : ^ inch = 1 foot. Dimensions of Ckown Moulding. Depth of Stay. in. 8K in. 10 in. 10 in. 12 in. 12 in. 12 in. 12 in. Projection from Wall. 22 in. 24 in. 26 in. 28 in. 28 in. 30 in. 32 in. 34 in. Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete "Width of Face of Stop-Block. 12 in, 3.15 4.45 3.25 4.57 3.56 4.95 3.66 5.07 3.89 5.36 4.00 5.49 4.11 5.62 4.22 3.91 5.36 4.02 5.49 4 36 5.91 4.47 6.04 4.72 6.35 4 84 6.49 4.96 6.63 .08 18in, 4.67 6,27 4.79 6.41 5.16 6.87 5 28 7.01 5. 55 7.34 5.68 7.49 5.81 7.64 5.94 7.79 DESIGN No. 902. This Design may be regarded as a type of a class. The fol- lowing figures are applicable to all Stop-Blocks possessing the same general features. Patterns extra in Sll cases. Scale: M inch =1 foot. Dimensions of Ckown- moulding. Depth of Stay. 10 in. 12 in 12 in. 13 in. 13 in. 13 in. Projection from Wall. 22 in. 24 in. 28 in. 30 in. 32 in. 34 in. Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Cut and Formed Complete Width of Face of Stop-Block. 12 in. 3 74 5.78 3.86 5.96 4.44 6.76 4.58 6.94 5 28 7 88 5.42 8.08 5.56 8.28 15 in, 4 28 6.42 4.42 6.62 5 02 7.44 5.18 7.64 5.90 8.62 6.06 8.82 6.22 9.04 18 in 4.82 7.06 4.98 7.28 5.60 8.12 5.78 8.34 6.52 9.36 6.70 9.56 9.80 180 THE KITTREDGE CORNICE AXD ORNAMENT COMPANY. FRIEZE-PIECES. One of the often-repeated elements of a cornice is the frieze-piece. In point of design the frieze affords the architect unusual opportunity for display and decoration. In the following pages we have, however, confined ourselves to those patterns in very general use, allowing for the most part those designs of special employment to go unpublished. These designs are each to be regarded as types of the general classes they represent. It is self-evident that the mere change in the profile of the moulding of a panel, would not constitute a variation in cost, to be recognized by a change in figures. The same may also be said of other similar features. Whether a given panel is formed as a recess or as a projection, does not aftect the cost. These general principles borne in mind will render these tables of great utility and convenience. Several of the designs here presented are as well adapted to use as planceer and soffit-pieces as frieze-pieces. The slight difference in construction to adapt them to the change of use will not vary the price. The ordinary construction of frieze-pieces for cornices put on wood look-outs, is with a clinch- ing edge to be used in connection with the corresponding edges upon the brackets. In cornices put up on iron look-outs the frieze-pieces are ordinarily lapped and joined behind the brackets. Tiie prices here given will cover either of the above constructions. The dimensions of an ordinary frieze-piece, used to determine cost, are the length between brackets, or in other words the length exclusive of flanges, and the girt. Some of the patterns on the following pages are priced by the length as given above, and the height of the frieze, in- stead of the girt, as is made necessary by the peculiarity of the design. As in all other work in sheet-metal, previous to its execution in the shop, accurate drawings of profile and dimensions are required. Certain adjustments of machinery are also incidental to each and every variation in work. For such items of cost as the above — items which are common to each and every lot of work executed, and which are the same in amount, whether the lot be a single piece or a hundred pieces, an arbitrary allowance is necessary. This charge is made un- der the name of Patterns. The charge for patterns on frieze-pieces will of course vary accord- ing to the size and design. We annex tables of these extras, including the cost of drawings sent with cut and formed work, to which the reader is referred. Intermediate sizes of Frieze-Pieces than those given in the following tables can be figured by the rule of average, comparison being made with those nearest like the one required. Longer lengths than those to be found in the following pages can be calculated by combining the price of two or more shorter-pieces. This latter rule, however, is not applicable in all cases, and must be used with careful discrimination. In some cases the additional length to a frieze-piece will figure only the price of so much plain moulding by the moulding list of the required gauge. In gauge, the frieze-pieces here priced, are calculated with reference to their size and design, and range from Ko. 27 to No, 24, according to the needs of each structure, and the principles of good construction. THE KITTKEDGE CORKICE A^^D ORI^AMEKT COMPAKY. 181 PRICE LIST OP EXTRAS FOR SHEET-METAL FRIEZE-PIECES. Design Numbers. Lengths. 10 11 to 15 16 to 20 21 to 25 26 to 30 31 to 35 36 to 40 933 Drawings, with cut and formed work 1.30 .65 1.55 .75 1.80 .90 2.05 1.00 2.30 1.15 2'6"&3' 0" Drawings, with cut and formed work . . . 1.37 .70 1.63 .80 1.89 .95 2.15 1 10 2.41 1 20 3'6"&4'0" Drawings, with cut and formed work 1.44 .72 1.71 .85 1.98 1.00 2.25 1 12 2.52 1 25 4' 6"&5' 0" Drawings, with cut and formed work 1.51 .75 1 79 .90 2.07 1.05 2.35 1 20 2.63 1 30 5'6"&6'0" Drawings, with cut and formed work 1.58 .80 1.87 .95 2.16 1.10 2 45 1 25 2.74 1 .37 6'6"&7'0" Drawings, with cut and formed work 1.65 .82 1.95 .97 2.25 1.12 2.55 1.27 2.85 1 42 7 0 & 8 0 Drawings, with cut and formed wf>rk 1.72 .86 2.03 1.00 2. 34 1 17 2.65 1.32 2 .96 1,48 8' 6" & 9' 0" Drawings, with cut and formed work 1.79 .89 2.11 1.05 2.43 1 20 2.75 1.37 3.07 1 .50 9' 6"&10'0" Drawings, with cut and formed work 1.86 .93 2.19 1.09 2.52 1.25 2.85 1.40 3.18 1.59 920, 921 l'0"tol0'0" Patterns Drawings, with cut and formed work .90 .45 1.20 .60 1.50 .75 180 .90 2.10 1.05 2.40 1.20 2.70 1 35 918, 919 rO"tolO'0" Drawings, with cut and formed work .75 .37 1.00 .50 1.25 .62 1.50 .75 1.75 .88 2.00 1.00 2.25 1,12 915, 916 917 l'0"tol0'0" Drawings, with cut and formed work .60 ,30 .80 .40 1.00 .50 1.20 .60 1.40 .70 1.60 .80 1.80 .90 914, 922 923, 930 1'0'tolO'O" Drawings, with cut and formed work .45 .22 .60 .30 .75 .37 .90 .45 1.05 .52 1.20 .60 1.35 .68 Design Numbers. 925 926, 927 Dimensions — inches . Patterns Drawings, with cut and formed work. Patterns Drawings, with cut and formed work. .66 .68 .64 .76 .73 36 .76 Design Numbers. Lengths. Depth — Inches. . . . 13X 15 17^ 20 22X 25 3TK 30 32K 35 931 2' 0" to 2' 6" Drawings, with cut & formed worK 1.48 .70 1.52 .75 S'O' to 3' 6" Drawings, with exit & formed worK 1.60 .SO 1.65 .83 1.70 .85 1.75 .88 i> 0"lo4'6" Drawings, with cut & formed wor^ 1.72 .85 1.78 .89 1.84 .82 1.90 .85 1.96 .98 2.02 1.00 5' 0" to 5' 6" Drawings, with cut & formed worl; 1.98 1,00 2.05 10,3 2.12 1.06 2 19 1.10 2,26 1,13 2.33 1.16 2.40 1.20 6' 0" to 6' 6" Patterns Drawings, with cut & formed wor]>- 2.20 1.10 2.28 1,15 2.36 1.18 2.44 1.22 2.52 1.25 2.71 1 .35 2.60 1 30 7'0"to7'5" Drawitigs, with cut & formed worl- 2.53 1.25 2.62 1.30 2.80 1 40 S'O'-' t: 8' 6" Pr-iAvings!, with cut & fo-med ^rorV 2.90 1.45 3.00 1.50 931, 932 l'6"tolO'0" 1 Drawings, with cut & formed work .73 .35 .76 .38 .79 .40 .82 .41 .85 .42 .88 .44 .91 .45 .94 .47 .97 .48 1.00 .50 182 THE KITTEEDGE CORXICE AiTD ORi^TAMEKT COMPANY. ^ 31 ^^^^ m «w c4w i I 1 si si mmmmfm. wmmmmmmmmmmmm 51 si si ft if il if if Il 36 II II ci„ »^ si si S2 i cajO COTji cjTf co^ lo tato iax> >occ> 1-1 t>- iO o> — 1 ooo COTf o» — CO 1-1 Oia COi£5 "^iO r-teo |.-tCO coo coco ■^50 pi* CO •-ICO iCSlT}" cnco eao: "'**co No CO CM T , CO lO lOC< COO lOt- tcit- cot- cooo coco -I* CO Ol- t-l 00 00 CO csi 3 esi o O X. co.^ r-lOi If-tOi lOOO CO 05 k£> C< \0 lO cj..* [e t- C3 t- Ot- ICOCD COO COCO lOC- tot* CO i;. ICO XI o> X> ca05 tot- cot- c- m lO c^ ooo cooo CO coo jCSlTt to 35 CO(?< o o cot- ICSICO CSICO tOr-5 COTt< CO lO oco ot- •^lO CO It^r- CO O CO CO ■ lO coo caoo too lO — COCO co-^ f— 1 1-1 rHt- toco cn05 coos l6;C t-t- coc< tot- to in o >n idf 3: caco cot- CM (M to r-( COOO lO CO to dco cico CSIQO too CSlTti ;^ OCO Tt< O C0 05 rH { - COr-t coTt< icotr* [CO CO-^ t-tl- Kf«C5 COio|-cjiv:iNl«»0 oco CO ID — ■ o»o caco ■iO csic- io.;i i>-JO ci Tji jo Ti< Ico x£5 pi lo ■"it CO li-tco it^C: o lO cooo too -^o -^lO p'o ^CO |0'>' coco ^-tco •^CO l«OcD C-Ol CO >ft coco corn lOco ItOt^ OS4 o rr lOt- to CO r-l CO COf CO CO CO — < i-tO eico coco CO 00 cieo to r1 Cl^ CD 00 cj>;o corr t-ICO 1-1 ~ O j CO 1-1 1 cn t- toi-t o •vr t-ico ciio pixo h**»o ooo icoTT icao |i>-»n \fn-rf cat- ■<*^<^ I^CO l»C>CO k>CD co — < t>.(M lot- ot— OTj< lOt- CO --.&■< Cco ci.^ CM Tf ca=9 COt1< coco Tit 00 °- CJ»CO t-t IC coin j-^io coco Tl*Op t- tOO -n "~**° to CO 005 cot- to CO too lOt^ o CO rqoo lOt-t r4co COTj« ciso CvlQO cieo IOtx I0> lO COO CO(?< CSI 00 eorj* io»- CO t- cnio icaoo to 31 COi-( cir)l COiO COfN o> m cacp ca 00 toco COff* t- 1-1 ■i*<0 O lO o>co •^CO C0 05 CM la lOco co^ toco C5 <0 'XJ C£> 3J -^•^ o> esiTt |Tj«co r-t-^ coco oico kico to 00 Mco CO T-< Carji ca rp oeo tot- ic^Oi cao Tjtt- lO -M co»o CO lO CJ» w-t COtJI CO -"^ COCO coco to 00 caco eoq cao ;CO rl C3CO ca iO to 1'^ id toco t- in tool ■^lO Ol- CO 1-1 -*«co I-I05 .-ICO to CO !>. t-l!N r4cO CO ^< 0> 7* rHjo oco cico o iCM ;0 THcp to 00 eico c^co cot- co o ca.<;)i .>i«00 too; ca -T COtJ< COO rttl- coti* COtJI coot COi-t eolo oco oco •^la O •TP CO lO i-iin lOt^ Ttiin CM CO t--o;^ ■.cr. esiTO lease Icjco eocO|COCO|2;Tj'|r»tTj< oth "-fcq «!»o «oc^ ca-^ Icotj* Icotji |cori< -it •'T iTtt -i< I>.a5 OJr-i coT)< leoin to iCi ito in ■-•CO coin THin l-atin too tot-; in CO n< lOt- O iM lOl-H CO o i-HCO to .-< I^o c>ir< csi'<3; cqjo Itsico O raco coos CO t— caeo coos coos caoo Ol-l COrf* caoo caeo COTj* ■-• f •"a* in f-1 1- coc- oco COOi O CO Ort o in coo caco COTl< cort* COTf •«J*iO 'i'ln l-at o r-J W IOC* o koc-; li-io carf O 1-1 0(N co-<# ooo ca^t; eOTji Tlt»0 COTt* CO CO 1 -at CO 1 CO lO COC- COOi Ot-I COrJI |cOt)< IrJt lO ca caco Tit in 0(7< TjtlO nin ICO t- ito in i-dt c r-l C* CO-* IOC CO i- O r-t caco to -0 caco lea-* w-ta CO-^ rOTf ICOTt* lCOTj< Ti« in l-o U-«T-( coco caeo lea eo leaco ir-to oo toco caco lea CO Ito CO to;o caiH caeo 0 02 ""fO C-CO icagj caco lOTT cot-^ |[-I(n' r-l '7'' IO03 COTJI f-iot la-«0» 0O5 ea o r-«,-( Ir-id* l—t! CO 1-1 hs«!w toco CO Oi ,IOCO jcoeo jt-^^r ICO CO ca 'Tt loo coco jt^"^ S8 CO in lO CO 56 ti : o ; c o . _ *s « s 2 O 13 ;j a : o : 1^ a ; o : OM IC0 05 COCT> PP caeo Ico cain ca G-t COTt* CO-* COTj^ I fO ^ I CO G>0 tort* ca» to -a; lO ot to c •d o =^ c 3 o •a© ^ ■ a : o -■ t-;o CO it-o cao coi-( kit M caco leaco Icaeo c3 ;:■ oco lOO caci ca(r» coo caco cat-; cafN Si8 ca t— t- l-a* Tt< coin oco O . ^^ o :i o ^ a ^ o JO THE KITTREDGE GOEXICE AXD OEKAMEIs"T COMPAJsY. 187 1 I 3 Si; 8 -^■^ jiOcD jwi:- lOt- [«>t- |«it- IS Iflflflfl! fttlwit SSI S iSS S8 IS3 §3 S J 3^ j up! itftltftitli ftSfftitft-it ftftftftftftftffl tfitftft#lt ftftftft^ mm ftftfi ifil If IS I! mm IflflfilEl! tifi m mm. s5 witft Iff! mi Iff air Itiiff 188 THE KITTREDGE CORJ^ICE AKD ORi^AMEKT COMPAis"Y. ftit itft it- gg g| Is U U ii gg gg ipfftftffft«ftftftfl fftftmttftftWtt^tf™! t^tftftftftit iiritftwft g.i gg gg S wfrgfws- ftfiltff#iflfftftif ftftffitftftwftft it THE KITTEEDGE CORNICE AND ORNAMENT COMPANY. 189 a o>0 «=>o CO c< lOGO -<1««0 IOC- to L- CSICO CO — < CSIt- esi CO ooo coco CO i- cot- coc- csi lo coi- csi ts •-•00 CO lO co^ ooo oil- OO «oo CO -'J too lO CO CO I— X) cj O OlO i-lOi OO coo CJ>5^ o»co oco 5 r-lfO t 0 t03i r O'?* O!?? OfO .-I CS1« 0>0 lOO c-o < to 5^ 0 05 tao corn lOCO coo C»T-( ^o CO 'J* CO Tj< cooo coo too too t>.o t^o c^o t-o •-• lO CSI lO CSI o CO t- OfO OTf •-t-rfi r-«io esio rH^li-li— [ r-CO CSIC- t»'7J OCl cooo -^o ooo I (?« O 00 hi* 3^ 1 t>.o c~o \.o ooo coco too CO (OOO tsio to 00 OO t-o CSl^ O CO t3»0 coo t-O COt-h coco d CO CSICO oco lt*T-l too lot- looo to 00 Oi?i jCOO "I 36 66 3 o 5a, 1^2 d o si o : ^ 12- o 43 a 66 a o OO too t>.o o 'd Oi c3 <^ w S 3 O OO (u ■ a> o : ^ © ■2 S o OO OO OO a o © =1 S o OO o ^ © OO OlO coo tOl-H "p © !l OO 190 THE KITTREDGE COEI^ICE AND ORis^AMEi^T C0MPA1S"Y. 6 is; I w CQ ft a bo o est ii-ico too tot- s3ao irjo >otr- toco esi^ co-<# ^lO Tjico lOlO t-fl lO to so lOi- to 00 C^CO :o IOC- tot- coo lOO to to t-05 ID IC csico .-•CO c~o .-IM CSICC t-H 1—1 COTt< OO O T-H tooo t-cj cot- t^lO tot- toc» COT}< ■3 a o .-3 & rs 6 a p torf coo toco « S if S ^ o a o OO OO o . too caco coco -^o tOGO COZO r-lf COlO lOCO CviO t-CS COO 05T— ' toco t>"00 com oco coo tS! to o to O cot- .-HlO tM -(^^ to o CvlTfl CS3 in co;o '-'CO 0>1-I °T-I OCl •-o too o>o o>T-i dci «3co i-ico t>it- tot- tOi-l oco 1-tco too loeo com coco ^^t- lo in co^ caoo -■j'co co^ CSITj* tO05 coo ^»r5 co- OCO d*CT> coo ■a § o ^ © -d © If OQ THE KITTEEDGE CORiq-ICE AKD ORNAMEXT COMPANY. 191 •-1 p. t o c5t- ]» t>; (?i ' CO X j o> - too loio [lOco jot- j«ioo jt^oo jc^g: jeocs joio |o. lO o CO O 5^ r-« CO Ct- i>-oo t-c; 1 CSrJI p**50 ^co ;cor-i cooo icdtj* |t>.co [caoo ic-o i.- loco iioc: L-H TjH .coo «>J:- [t'OO t>00 C0 03 cbo CO iO o(>< o o |o>0 cflTo ;csiL- oio CSI O ICOO ,c>in ir> T-H >Ci "-"CO t>a « COCO ■0 |oo |Cit 12 coco coj:- o in <0 03 too oo o>. 0>0 !00 oo CO cooo l£>CO t>00 t^O CSI CO CO OS 0>0 |CO(?* C£>-^_ COOi cdt- co't- |--0> CO »o COOS coo cMTr cooo Of «>c- t^QO 0>5^ CO O oo OtH cot- CM (M coos C3C< 0>i-l COiO cooo ot- coo Wot I0«0 llO;© COt- icoj:- O ff( -.JtCO CO t-00 OOO t-05 eoo5 CO o oo 0>0 to o CO£- O rt< coco COf t^oo t-oo CO O C005 coo cvico CM Gv! CO Tf lioco lo CO IOC- Icot- coo Tj«0 Tl«o oo toco Coo lOCO coi5 e^co CO TP CNl S-» lea CO taci coin oco CM 'T^ J-J O CO ICS! CM 00 TjlT-H C^Tf CO CO CO -N ca CO CSI02 OfM |0 lO t • |-^0 t~eo Oio CM JO »0 O (?8 a o s o -do 3 o -JO o . !l 3 O a : ^ . o • S o 3^ "5 © JO CO Tt< TP oco coco COrf COTj< CSI CO 0£« CSI^ c^co IcOtJ* oo CSI CO coo COrji CO 1-1 caco CO -M cot-^ CM CO '(•SO CO-* CSIO CSI CO C3C0 coco CSI CO I caco CO-* CSI so CO ~0 COM coc- CSIO fvICO nHCO C--10 caco oco C30 eacoj 'CKIO •-•00 "cjJiO IIOSO lOO ICOO com cj>r^ a : 3 3 O o . Eh o •o"S :3 c ;3 o COO icq Tti co£- |»OjO_ lioco o to cort" cot- COOO cot- COGO t^OO cot- Icot- coo to CO CO t- •>*• to cot- CO GO I-* ICOt- ► »n cooo CO 1 lO lO I lO t- lO CO lOCO coo lOCO CO o cooo' CO so coco ■^in in l-*iCO coco l OCO |coff* lioco lOCO liot- loc^ COl- to O cooo loco lioco CSlTjH cot- cot- 1—1 lO ooo COtJ( o o COTtI lO CO-* rt«tD CO-* CO T-H COM* •C COt- c sico g-ts o CT>0 COOD COTl< CM n csiso coco CSISO coq caco s o loco loco lioco CS1-* COl- ICO CDrl ■ in loco r»»ia n lo I T«« lo cot- op >n I cot- I « i n I ? I (35 ICO CO 1 (O csiir< ■ l-<3*in I coo I to in CO-* I ■Of* irj COTt< ' coc- CM CO oo coco o . -no !1 :3 O OJ CSIt-( CO-* coco ooo CSISO ICO CO Ico-* oo coco o ^ © -J o oo |-<*«o •-f r-t COCO ■^in '-i«ui ooo coc- CO-* b-co C O-* c^i^ coS CO-* COrjt 3 o © « s ■ o a o JO 192 THE KITTREDGE CORNICE AKD 0Ri^A3IEi^T COMPANY. O ai P3 O) <0 c3 . I' bio to 00 co IOC5 Ot-; too too ^1 coco eooo to 00 to in ojco esiio coo coo CM O CO o oco j too Ico^ COl-H coco tOlO tSlOO C7>T-I too rtO too CO-* <7>tH COlC ito-* o>-^ iCOO coo COt-( CO r-l csiiO COO lOO C»0 C!>10 CO'* •a s "I 8J ft ■if C o 55 2s oo CO-* lOO tOL- -* CvIO o lolo ■^00 CO IfJ coin top ir>o "!t«o lot- toco t^~05 coo C!>i-H csiin too o>o cico coco r-ico *3 lOGO tO05 t-^o lo CO tooi c^o too crtOX to ,-1 o -:> «-»t— t«.m ■0 tno coo CO csi-<:j< esiin coo csio cot- |»-nn coo CO Tl too COCi corf MO coin coo iOC> o .3 O ■C5 g o 86 ^2 CO OJQ o cj in Tt*0 COCO irit- eoin i-io l-H ■* c-in coo ■^00 tof -IS a o 66 a : f-l ■ o : -I aj ft COO ci ft CO-* •^co ■-I10 C>r-( too coin MOO r-l CO coin o Is i-io itoo o S o to-* coo O 'I a o ^a a o 194 THE KITTREDGE CORKICE AITD ORN"AME]S^T COMPAKY. THE KITTREDGE CORiq"ICE Ai^^D ORNAMENT COMPAN'Y. :3 bo •-•CO C3>t- 09 X> rHOO COO c-o< C-.CO ©>•<* com o>in City U-iCl c-co (tH ksiio t^(N t»co co-^ wo o>^ o> in to 00 o?o Ml- leod r^eo eao? oi-i -"jfCTs oOi Ttt- OQO OS5 t>.CO CO"^ C910 coco t»T-< t-CO CO"* coo coo loo t>.-r-l t-iCO lO»n r-trf too toT-H t^trj c>lco ooo lOOO ro«o co«o -^f coo b-lN iM 0£- COCO lOOO 1005 lOO OOl IXN t-co €OSi r-105 OlO taTi ooo cn«o ot- MO ca-^ tOOJ oco ot- ■.-( ooo CO-* CM 00 coo ■-•o lot- O CO CO CO oo O>G0 £00 Icacs COCO COtH toe* CdOO coo lOO •-IO CO 00 1-4-* IC3>CD a o 31 coo o^ cocc coco o ■ 3 : o ■ is 3 O o -3 o OO P4 4) « S =! O OO OO lOO CO'^ co05 too a Em 05 rs o OO cat- coco c35 005 tj>o toco t>Ico »-io oco 51? Ot-I COO ir>Oi (OO St^ Itoo coco Icoci caco lot- Tf«CO OO lOQO O OO a> ■ a : }-l • o • OO loo a : i< • o • "d O) ^1 ■u S S c OO C a> THE KITTREDGE CORI^ICE AKD ORNAMENT COMPANY. 107 !> o 3.09 4.08 to !- ta o CO Tl< 4.17 5.26 CO t- ta ! 5.27 6.46 t~i in CO 0 6.37 7.66 I 6,91 8.25 06 00 8.01 9.45 I inch — 1 foot. 2.97 3.94 3.49 4.51 4.01 5.08 ta t- ta to I*. lO 5.07 6.24 s s ta to 6.13 7.40 to f- to Oi ta v ! 7.17 1 8.54 7.71 9.13 l> c» lo o to CO to if5 CO CO ta o CO o CO T)< CO 0 I- CO in CO -rH tn a> CO eo CJ> 00 Gi od :^ M CO CO tjt CO ra* .41 iO to ta to ta t- to f to CO !>. CO H ^^^^ ^ Oi o oo 2.73 3.66 3.21 4.19 CJ» c« CO I- CO 4.19 5.27 j 4 67 5.80 5.15 6. 33 ir> 00 to 00 ta to 6.13 7.41 i-f •Tt' to CT> to f I 7.11 8,49- o 00 2.61 3 52 3.07 4.03 3.53 4.54 0 0 TJ« iO r- 00 in in 4.93 6.09 Tjd to 5.87 7.13 CO to to to t- 6.81 8.17 DESIGN No. 931. 1 1 Feiezk-Pikce: Plain, Vertical Half-Panel, Curved Comers, with Half-Balls; Mouldings without Enrichments. NoTK —This Design Is to be regarded as a typo of Its class. The following figures are applicable to all Frieze-Pieces possessing the same general features. Patterns extra In all cases. See Introductory Note. \ c* CO TJ€ CO 1 c ta 00 la 5.09 6.29 CJ> rj< I- 10 to t-t T-< tJ» Gl to I- 2.13 2.96 2.51 3.39 2.89 3.82 o> l- CO ^ 3,67 4.70 ta eo 0 T-t Tt« in ta CO -)* in Tf« in CO -rl CO 0 M. to c3 ^ ta to i-f OJ to 00 to to l» 2.01 1 2.82 2.37 3.23 2.73 3.64 w-t t- r-t 0 to 'I* 3.47 4.48 3.83 4.89 r-t Si CM CO ^ in eo 10 L- Ti. in 4.93 6.14 I-f l- co in ta to b 1.89 2.68 CO t- csi o ca eo 2.57 3.46 s s M eo 3.27 4.26 i 3.61 j 4.65 3.97 i 5.06 4.31 5.45 to CO 00 ^1 in 5.01 6.25 9 1.77 2.54 2.09 2.91 !-• 00 ea eo 2.75 3.67 3.07 4.04 3.39 4.41 3.73 1 4.80 1 rt* in CO >n .-^ in 5.93 b 1.65 2.40 ir> lo w-t Gi 2.25 3.10 i» t- la -rf CM eo 2.87 3.82 r* T-l CO Tl< 3,49 4.54 3.79 ! 4.89 j 4.09 5.24 ^ s ■^»« in 1.53 2.26 1.81 2.59 2.09 2.92 0 t- CO Gi CSI eo 2.67 3.60 2.95 3.93 , 3.25 4.28 3.53 4.61 3.81 4.94 © ©9 1.41 2.12 1.67 2.43 1.93 2.74 CSI 0 CSI eo 2.47 3.38 2.73 1 3.69 3.01 4.02 1.29 1.98 CO t- lO (?* t-t Gi 1.77 2.56 eo 0 CO CSI c« 2.27 3.16 b 1.17 1.84 1.39 2.11 1.61 2.38 b 1.05 1.70 Length Cut and Formed Cut and Formed . Complete Cut and Formed. Complete Cut and Formed Complete Cut and Formed. Cut and Formed . Complete Cat and Formed Complete ........ Cut and Formed. Cut and Formed. Cut and Formed . Depth. (?*^ in .9 .9 0 0« d a i.O a I- Gi d eo 196 { THE KITTREDGE CORNICE AND ORNAMENT COMPANY. ' EXAMPLE OF AN ESTIMATE IN DETAIL. . — / It is usual in almost all sections of the country, at the present time, to make one contract cover the Galvanizkd-Iron Work, Tinning and Slate-Roofing. Accordingly, as being of great- er interest to our readers, we have chosen an example which combines, the caliiulatloBS of all three of these items. ' - We present &est' the Architect's drawings, from which the estimate is to be made. They con- sist of the following : Front Elevation of Building— Scale ^ inch ~ 1 foot. Plan of Roof and Cornice — Same scale. Details of Main Cornice Scale >^ inch = 1 foot. Side Elevation of Hood to Entrance— Same scale. Elevation of First Story Window Cap — Scale = 1 foot. Elevation of Second Story Window Caps — Scale >4 inch = 1 foot. Elevation of Caps on Side on Rear op Building — Same scale. The Architect's specification reads as follows : Galvanized-Iron Work. — ^The following items are to be made of No. 26 galvanlzed-iron ; The main cornice extending entirely around the main building. The cornice at junction of slate and tin roof. The cornice to bay-window. Hood to front door. Caps for all openings, except those in the bay window. Capping for hips of roof. Chimney caps. Conductor pipes. There will also be the following items in Pressed Zinc Woek: Cresting and finials, main roof. Cresting on bay-window. Cresting on front door hood. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 109 (Shebt 1.) 200 THE KITTREDGE CORisICE AKD OEJ^AMEl^T COMPAJfY. i Plan of Roof and Cornice — Scale }i inch »-» 1 foot. (Sheet 2.) THE KITTREDGE CORI^^ICE AND ORiiTAMENT COMPANY. 201 Elevation or Main Cornice on Front— Scale inch «= 1 foot. 202 THE KITTREDGE CORKICE AKD ORKAMEKT "'GOMPAKY. Elevation of First Stort, Front, Window Caps— Scale 3-16 inch — 1 foot. Elevation of Caps on Side and Rear, First Story — Scale }i inch 1 foot. (■aEKT 4.) All to be made and placed upon the building in the most substantial and workmanlike man- ner, and left perfect on completion. The cornices, both upon main-building and bay-window, will be constructed upon wood look-outs. The front door hood will also be supported by wood look-outs, as may be necessary. The cresting to main-roof shall be constructed with all proper stays and tubes, and in putting up shall be sustained by a 3^ inch rod, bent 4 inches flat on roof, placed in each alternate stem. The crestings on front door hood and bay-window are to be simi- larly supported, but with proportionately lighter material. The main cornice varies in the placing of brackets and modillions, as is shown on the roof plan. In the rear, the brackets, modillions, frieze-pieces and foot-moulding are omitted. The foot-mouldings and modillion course are to be returned around back corners, as shown on roof plan. A brick frieze is left on left hand side. The window-caps (including cap over door in rear) are in number and design as follows ; 3 Caps, first story, front, Ko. 978, K. C. & O. Co. Catalogue. 14 Caps, second story, front sides and rear, Ko. 26, K, C. & O. Co. Catalogue. 10 Caps, first story, front sides and rear, No. 738, " There will be two conductors from main cornice to ground line, to be five inches in diame- ter. Also, one from gutter in bay-window to ground line, to be two inches in diameter. Cresting No. 1250, K. C. & O. Co. Catalogue, is deemed satisfactory for main deck, to be provided with suitable finials at all angles. Cresting Ko. 1254, same catalogue, may be used on bay-window and front hood ; also, to have suitable finials at corners. Tin Work. — The deck of main roof and roofs of bay-window and door-hood are to be covered with best quality of 14x20 IC charcoal roofing-tin, to be laid flat seam, to be well cleated with not less than four cleats to each sheet, and to be well soldered. The valley will require a gutter of not less than fourteen inches in width, to be made of best charcoal roofing-tin. Flash ail chimneys six inches above roof line, and securely counter flash cementing joints in brick work when done. Extend chimney flashing under slate not less than eight inches. Line all gutters THB-KITTKEDGE CORKICE AKD ORN^AMENT COMPANY. 203 with best bright charcoal tin. The main gutter to be securely joined to cornice in front and to extend up under slate at back. Slate Work.— The steep part of main roof is to be covered with the best quality of 10x20 Vermont roofing slate, of either blue or purple, as may be selected, to be laid with proper lap in plain pattern, without cutting, upon two thicknesses of the best quality tarred roofing felt. Concerning the above specifications, it is to be remarked that it is seldom or never that one is written as complete as the above. Very much of what is here given in ordinary cases is con- veyed by a general understanding, by the custom of building in the community, or by verbal ex- planation upon the part of the architect- In all estimates made to fix a price at which a job is to be executed, too great care cannot be taken in obtaining exact information as to the requirements in all respects. Upon close inspection of drawings the mechanic will see at once that there are some very material variations between the designs as given on the elevations and in the details. In the window-caps a leaf is found ou the corbels of one, and a rosette on another, which does not ap- pear on the elevation. The same may be said as to main cornice, wherein it will be noticed that a leaf is shown on the face of the bracket in the detail, which does not appear in the elevation. Such changes as these are very common in all sets of drawings, and must be guarded carefully. As a rule base all estimates upon the drawings from which the work is to be made, or in absence of the working drawings at the time the bid is made, agree to do the work only as shown on the drawings furnished at that time, and which were used in making the estimate. With this much of an explanation we will proceed t6 give the estimate in detail, as it would ordinarily be made by a mechanic, remarking only thai the prices used on tin work and slating? are purely imaginary — as differences between localities are so great that to take a figure which would seem applicable to the case in all parts of the country is simply impossible. We give the estimate both for cut and formed work, and complete, as better illustrating our purpose. The ruling of the pages as given below will be found of convenient shape for general use. The method of division into elements is considered good. The three columns on the left classify the different elements. The Items in this job, for example, would be Main Cornice, Window Caps, Conductors, etc. Of the Main Cornice the Parts would be the various Mould- ings, Brackets, Frieze-pieces, Modillions, etc. ; and the Analysis of one of these parts, for ex- ample a Bracket, would be iron, solder, Mvets, stamped work and labor. The use of the latter column is more apparent upon work wherein price lists are less available than in the present example, and when divisions into items of material and labor is absolutely necessary. ESTIMATE. Mr. John Smith's residence, Shady Side, near Emporium. Thos. Collins, Architect, No. 97 Fourth Street. Estimate made April 1, 1876, by Tommy Tinker. — . \ Drawings and memoranda used in making this estimate. (Here would follow a list of the drawings, a copy of the specifications, and note of any ver- bal explanations or directions given.) \ 204 THE KITTREDGE CORNICE AKD ORN"AMEKT COMPAJ^Y. O H o ^gj^ sss gsi^ Sl^ § s cos>t ' . CM O CO CO I- ^ to w-t o> O CO r-IO o> o lo ir> r-H C3 CM CO OC3 CSIO 1.56 CM w-t 1.00 w-t ta .18 ta CO CM ta o CI I - lO r-tO a a H a •S C4 ec eo CO 00 CO c» C5 ta ta C3 CO CO to to CSI CM CM CM CSI 2a O OD rt :« a ^ V t> QJ +3 '« S ass J. « -S ■TS *i> -U |--a bOflj .2 a §2- O 4^ •2g §•1 CD S 00 ^ O W .2 2 N ei o 0] I OS'iH .2 a a II 8 |§a •^M o boa © be^ 2 2^ CO >-H Si .p }-i -a 5f a (l>"5)a : bo •So "2 J- CO 0 S.2g . 1"^?S 1 eS Q rS > bb • • ■2 i : .2 • n : : 2 • •" : : "3 • • § : : 0 • • ^ '-i S :S gas « OQ d « © Crov Mite Patt d bo • : bo • bci3 a : : 0 . 2 • • 5 i bo 52 "i ^ • • ^3 OQ •3 g .2.2 f=i d u) »-i P ;-t © is l> (U *» 2.2-3 Srj OS ■*3 ■u «H 0 cn Pi' ^ OQ )0 10 ^ •sxavj; TfH «0 CD to ?o (X> 00 in Tt< CO (Tt th (M 0 20G THE KITTEEDGE COEN"ICE AND ORNAMEl^T COMPANY. H CO O H oSo o o Oi-lCt o o S3 S< C3 O QQ > .9 .9 o & CI ^ 8 « ft O o « « So'"' , tn C3 O a s « sis -d sa 03 tCO' ••^ to O o3 C5 in -d-d to ^ bo D .2 W— *^ O w as CO « .S'd "d.-^a "9 = I 0) "d -d Ill fi _ .— ■ fH r> o 00 8 ® 3 c3"r o o ^ (g) S THE KITTREDGE CORNICE A^D ORIS'AMENT COMPAN^Y. 207 FOZtliC OF PZ10F0SZTZ02T. To the estimated cost prices thus obtained, after adding the desired profit, a proposition will be made out something as follows : Emporium, April 1, 1876. Jno. Smith, Esq.: Dear Sir— I hereby propose furnishing, complete, upon your new residence to be built at Shady Side, the Galvanized-Iron, Tin and Slate Work, in accordance with the plans and specifi- cations of your architect, Thos. Collins, Esq., for the net sum of dollars. Very Respectfully Yours, TOMMY TINKER. DESIGNS OF ARCHITECTURAL ORNAMENTS MANUFACTURED IN SHEET-ZINC BY THE KITTREDGE CORNICE i ORNAMENT COMPANY, SALEM, OHIO, IISON .SAVAGE & CO. .PRS. CLEVELAND O. Now designs made to order at any time by competent artists, and at reason- able rates. The cost of new dies will necessarily be added in the price of the article produced. Architects, by selecting from patterns here presented, will thereby save all such extra costs. The list-price on ornaments, as upon all other goods manufactured by the Kittredge Cornice and Ornament Co., is subject to a discount (to the teade ONLY,) which will be arranged by correspondence. Our goods will at all times be sold as low as any others of equal merit. We are prepared to supply ornaments corresponding with all designs published by other manufacturers, and at their prices. This oifer renders our assortment unequalled anywhere. 207 ARCHITECTURAL SHEET-METAL The almost universal utility of Sheet-metal work in Architecture is strikingly illus- trated in the use of Ornaments. There is perhaps no material or substance as well adapted to the purpose as sheet-metal. Zinc is most commonly used on account of its comparative cheapness and great durability, and is the material upon which the prices following are based : but copper and brass are equally applicable, and are occasionally employed. The use of sheet-metal ornaments is comparatively recent in this country. Even at this present day there are some sections of the country in which their use is scarcely known, and hence but little appreciated. In spite of the great utility possessed by this line of goods, its use has been retarded by lack of a supply of ornaments of such shapes and patterns, and at such prices, as would render them both economical and po- pular. The designs and prices presented in the following pages are calculated, we be- lieve, to meet in all respects the growing demand felt for these goods, and to overcome the objections heretofore prevailing against them. It has been our aim to get u}) only such patterns and designs as will be of general service to the building fraternity, care- fully avoiding those special patterns, which, however meritorious they may be in de- sign, are not of general utility. In comparing the catalogue here presented with all former books issued, it may be remarked that the cuts herein presented are made to a uniform scale of One Inch = One Foot (with one or two minor exceptions, which are plainly noted in connection with the design,) and that in addition to this the sizes are expressed in figures in con- nection with the cuts. The prices are to be found in each case, in connection with the design. The designs are arranged somewhat according to kinds and classes, while at the close of the catalogue will be found a copious index, arranged by numeri- cal order, giving the page in the book upon which the design may be found. We be- lieve this double presentation of the goods will be found in every way satisfactory. All the cuts were made from photographs of the work itself, and hence are accurate pre- sentations of the goods, We desire to call especial attention to the leaves and flowers, calculated for garlands, and also the fruit designs used for the same purpose. In the collection here presented 208 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. is an assortment from which almost any want may be supplied. Architects will find within the reach of a very moderate sum of money, features of decoration and ornament which heretofore have not been attempted in this country at any price in sheet-metal. To a limited extent, ornamentatipn of this character is being applied to the face of stone work in place of stone carving, as may be seen in the ornamentation of the Frieze of the Art Gallery of the Centennial Buildings. Attention is also directed to the natural forms adapted to various phases of gothic architecture, such as the branches and twigs of various kinds, and the oak, ivy, laurel, rose, and other leaves, as presented in the following pages. Their use in frieze and spandrel pieces is at once tasty, effective, and characteristically American. Our assortment of Capitals is believed to be unequalled anywhere. A peculiar feature of our construction admits of change in size and relative proportions, so as to ad- mit of supplying the greatest number of wants from each design. The designs of leaves for faces of brackets, etc., are several times greater in num- ber than ever before presented to the trade, as is also the assortment of rosettes. Spun-zinc trimmings, besides being a virtual necessity in every well regulated cor- nice-shop, form one of the neatest and most tasty methods of decoration at the command of the metal-worker. Our facilities for manufacture of spun work are unequalled any- where. Besides the few goods presented herewith, we are always ready to get up spe- cial shapes to order at low prices. We desire to call the attention of the trade to the shape in which work is shipped. In part our designs are priced in duplicate, referring now to those which are made of parts, one price being for the work in parts and the other for the same complete. Thus the purchaser has his choice. The advantage of buying work in parts is the saving in bulk and consequent reduction in cost of transportation, besides the opportunity of using workmen advantageously in the joining, opportunities for which frequently occur during slack times, stormy weather, etc. All articles shown in this catalogue are carried in stock, and can be shipped on short notice. THE KITTREDGE CORNICE AND ORNAMENT CO., Salem, Ohio. THE KITTREDGE CORNICE AN^D ORl^AMENT COMPANY. 209 ROSETTES, The Cuts on this page are to the uniform scale of One Inch = One Foot. 4 Inches. 1502 — 2 inches, each 1502 — 4 ♦* " 1502—6 *' .03 .05 .10 2^ Inches. [487 — each, , 33^ Inches. .05 1503 — each, .06 4 Inches. 1509 — each, .10 Inches. 1714 — each, .08 33>^ Inches. 520 — each, .07 23^ Inches. 151 1 — 23^ inches, each, •05 <1 4 Inches. [511 — 4 inches, each,. lo 43>^ Inches. [$26 — each, 43^ Inches. 1599 — each, 43>^ Inches. 1 5 10 — each, 5 Inches .10 15 19 — each, 5 Inches 512 — each, . , 53^ Inches. 6 Inches. 10 1616— each, 15 1507— each, 15 THE KITTEEDGE CORKICE AND 0R5^"AMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch =One Foot. 1293— each,. 30 1515— each, 25 1514— 5 inches, each, 17 (This differs from No. 1514 only in depth of profile.) 9K X 5/4 Inches. 1424 — each, 30 6)^ X 6}^ Inches. 1534— each, 30 THE KITTREDGE COKNICE AND ORJ^AMENT COMPANY. i8 Inches. 1506 — each, 2.10 212 thp: kittredge cornice and ornament company. LEAVES FOR BRACKETS, ETC. The Cuts on this page are to the uniform scale of One Inch =One Foot. 1%, ^ 7 Inches. 1305 -each, 35 7 X 3j>^ Inches. 1312 —each, 4 X Inches. 1279— each, 25 8 X 113^ Inches. 1333 - each, 40 53^ X ID Inches. 1551-each, 35 6 X 10 Inches. [392 — each, .40 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 213 12 X Inches. 1307— each, 40 7_^ X 10 Inches. 1332— each, 40 53^ X II Inches. 1320— each, .45 43x4 X 8 Inches. 1331 — each, 25 <1 16 X 4 Inches. 1339- each, 40 4^^ X 12 Inches. 1349— each, 214 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. THE KITTREDGE CORNICE AND ORKAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch == One Foot. 21 X 29 Inches. 1542— each, 3.00 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 217 The Cuts on this pa^e are to the uniform scale of One Inch = One Foot. 12 X I2V^ Inches. 1540— each, .70 Front, 22 inches; Side, 19 inches. (Shipped in halves ready for joining.) THE KITTREDGE CORiflCE AND ORNAMENT COMPANY. Side, 26 Inches (Shipped In parts ready for joining.) 1310— each, 7^00 THE KITTREDGE CORIS^ICE AND ORKAMENT COMPANY. 211) LEAVES FOR GARLANDS, ETC. The Cuts on this page are to the uniform scale of One Inch =One Foot. SK X iK Inches. 1707 — each, .05 3^ X 2}'2 Inches. 708 — each, .06 4x3 Inches. 705 — each, 08 5 X 31^ Inches. 1706— each, 10 I X ii^ Inches. 1344 — each 06 7 X 31^ Inches. 1347 — each, 10 53^ X 3 Inches. 1493 eachj 08 7'x 4% Inches, 1703 — each, 15 4^ X 2 Inches. 1345 — each, .07 8 X 2}^ Inches. 1496 — each, 10 ^3 Inches. 1490 — each, 08 .20 6 X 2^ Inches. 1346 — each, 08 61^ X 2}4 Inches. 1491 — each, .08 5 X 2)^4 Inches. 1489 — each, .08 220 THE KITTBEDGE COENICE AKD ORKAMEKT COMPANY. lo X 7I4 Inches. 1483— each, 35 A}4 X (>}4 Inches. 6x5)^ Inches. 1698 — each, 15 1479- each, 18 8)^ X (>%, Inches. 1696 — each, 20 ^ ^/i Inches. 1472 — each, .20 9 X 4^ Inches. [697 — each, .25 103^ X 33^2 Inches. [692 — each, 25 loj^ X Inches. 531— each, 30 Left. Right. 8 X 43^ Inches. [530 — each, 20 9x3 Inches, 1356-each, 11x3 Inches. 8 x 2}^^ Inches. .15 1394 — each, 20 1462— each, 15 THE KITTREDGE CORNICE A^D ORNAMENT COMPANY. 221 The Cuts on this page are to the uniform scale of One Inch — One Foot. 13 X 3}4 Inches. 1463 — each, .... 25 10 X 2^ Inches. [461 — each, .18 14X X 4 Inches. 1494 — each, .30 Left. Right. 12 X 2}^ Inches. 1458 — each, 23 Left, Right. X 2% Inches. 1460 — each, .15 Left. Right. 10 X 3 Inches. 1459 -each, 18 Left. Eight. 6^ X 2 Inches, 1457— each, 7x3)^ Inches. 1454 — each, X 4 Inches. 1453 -each, 20 93.^ X 5 Inches. 1659 — each, 25 12 X 6}^ Inches. 1495— each, 35 Left, Right. 5^ X 3 Inches. 1456 — each, 12 2-22 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch = One Foot. i2>o X 7>4 Inches. 1687— each, 40 S/-2 ^ Inches. 1644 — each, Left. Right. 83,^ X Inches. [669— each, 25 Left. Right, iij/g X 6}^ Inches. 1670— each, 35 6 X 4j^4 Inches. 1678— each, .15 7>4 X 5^ Inches. 1677— each, 18 II X 7)4 Inches. 1676— each, 35 6 Inches. [710— each. .15 14 X 63^ Inches. 1646— each, 60 133^ X 1 1 Inches. [684 — each, 75 Sjy£ X 5 Inches. 1685 — each, 40 13^ X 12 Inches. 1660 — each, 75 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 223 The Cuts on this page are to the uniform scale of One Inch=One Foot. 14 X 6^^ Inches. 1683— each, 75 7K2 Inches. 1360 — each, .15 5x2 Inches. 1351— each, •05 3>4 X 3k Inches. 1554 — each, complete, .20 1504 — each, in halves,,. .15 3^4 X 4 Inches. 1357— each, 07 X Inches. 1555 — each, complete, . . .15 1555 — each, in halves, . . .10 loVg X 6 X 6 Inches. 1363 — each, complete, . . 1363— each, in halves, . . .90 .70 6>2 X 4 Inches. 1276— each, 20 6)^ Inches. [361 — each, joined 30 [361 — each, in halves,. . . .25 224 THE KITTREDGE CORNICE AKD ORNAMENT COMPANY. CROCKETS. The Cuts on this page are to the uniform scale of One Inch = One Foot. 11x9 Inches. 18 x 13 Inches. In halves ready for joining. In halves ready for joining. 1335— each, 70 1336— each, 2.25 THE KITTKEDGE CORNICE AND ORNAMENT COMPANY. BUDS, ETC. The Cuts on this page are to .the uniform scale of One Inch=One Foot. 2 Inches. 1699 — each, 51^ Inches. 1675 — each, 4 Inches. 12 Inches. 61/0 x 5 Inches. 1712— each, 05 1399- each, 30 1480— each, B 6% Inches. 73^ x sVi I"ches. .10 1674— each, 12 1689— each, 226 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. FLOWERS, ETC. The Cuts on this page are to the uniform scale of One Inch= One Foot. 5 X 31^ Inches. 171 1 — each, 15 io){ X 7 Inches. 1395— each, .50 6 X 43/2 Inches. [691 — each, .20 9^ Inches. 720 - each, .55 SX Inches. n)^ Inches. 1524— each, 25 1529— each, 75 12 Inches. 1535-each, 75 69.4 Inches. 1719— each, 25 lo^ Inches. [693 — each, .60 1 1 Inches, 1284 — each, .60 1694 — each, 30 1537— each, .60 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 227 The Cuts on this page are to the uniform scale of One lNcn=ONE Foot. Left. Right. 17)4 Inches. 1695 — each, 60 1695 — P^^" P^^"^ ^ [81^ Inches 1 533- each .80 61 4 X 7 Inches. 1295 - each, in parts, 40 1295— each, complete, 60 228 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. FRUIT, ETC. The Cuts on this page are to the uniform scale of One Inch = One Foot. 9 ■ 2l4 X 2 Inches. 1455— each, 04 i?4 X 1^4 Inches. 1641 — each, .03 X Inches. 1642 — each, 05 3^^ X 2 Inches. 1446 — each, .06 3x3 Inches. 1277— each, 06 4 1-2 X 3 Inches, 1274 — each, 10 33^ Inches. 1465— each, •<07 3 Inches. 1485— each, .10 5 Inches. 1484 — each, .20 5 Inches. 1474— each, 25 S}4 Inches. [469— each, 30 6 Inches. [475 — each, 40 THE KITTHEDGE CORNICE AND ORNAMENT COMPANY. 229 The Cuts on this page are to the uniform scale of One Inch =One Foot. 8^ Inches. 6 Inches. loi^ Inches. 1464— each, 45 1467— each, 25 1471— each, 30 Inches. 1690 — each, 25 1476 — each, 45 Left. Righi. 11^x3 Inches. 1492— per pair, 50 230 THE KITTREDGE COi^XICE AXD OENAMENT COMPANY. HEADS AND FACES 4j^4 X 3)0 Inches. 1601 — each,. 53-4 X Iiiches. 1602— each, 25 6x7 Inches. 1600 — each, 30 61.3 X 6 Inches. 1604— each, 35 9 Inches. 1608- each, 1.50 11x9 Inches. 1605 — each, 2.00 14 X 1432 inches. 1606— each, 3.00 21 X 21}. 2 Inches. 1607— each, 8.00 27 Inches. — 1609 -each, 7.00 THE KITTREDGE CORNICE Ai^^D ORJTAMENT COMPANY. 231 LIPS, DROPS, POINTS, ETC. The Cuts on this page are to the uniform scale of One Inch = One Foot. Inches. 1435— each, parts, 10 1435 — each, complete, 25 Si'o Inches. 1724 — each, in parts, 60 1724 — each, complete, . . . .80 f 6}4 Inches. 1362- each, ^05 7)^ Inches. :243— each, .10 33^ X 7 Inches. 1499 — each, 12 103^ Inches. [249 — each, .25 10 Inches. 1244— each, 40 7 X 18 Inches. :247— each, 60 9H 1498 — each, 60 232 THE KITTREDGE COENICE Al^D ORiTAMEKT COMPAKY. The Cuts on this page are to the uniform scale of One Inch = One Foot. 12 X 8)4 Inches. 1 27 1 — each, . . 60 12 X 13 Inches. 12 x 17 Inches. [411 — each, .75 1414 — each, i.io A full circle in place. 1393 — each, in parts, 50 1393 — each, complete, 70 I Inches. 1384 — each. 113^ Inches, .35 1443- -each, 30 I2i| X 6 Inches. 183^ x 9}4 Inches. 1442-each, 45 1436— each, 75 20 X 9)^ Inches. [437 — each, .... I. GO 5 X 3I4 Inches. 1366 — each, 05 2^ X 3 Inches. 1301 — each, .05 S}4 X S/4 Inches. 290 — each, .10 THE KITTREDGE CORXICE AND ORXAMEKT COMPANY 233 The Cuts on this page are to the uniform scale of One Inch=One Foot. S)4 X 4 Inche.^ 141 5 — in halves, each, 30 1415 — complete, each, 50 10 Inches, 1419- in parts, each, 35 1419 — complete, each, 60 PANEL ORNAMENTS, SHELLS, ETC. 83^ X 4}4 Inches. 1408 — each, 15 7^4 X 8i4lnches. 1409 — each, ... ... 18x7 Inches. 1412— each, 40 9)4 X 7 Inches. 1423— each, .30 16 X 8}.y Inches. 1429— each, 75 I5i.> X 10 Inches. 1421-each, I. GO 15X X 133^ Inches. 1422^— each, 1.25 8x7 Inches Very deep. [428— each, •75 7 X 63^ Inches 1304 — each, .27 234 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 27>^ X 251^ Inches. 1552— each 3.50 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch =Oxe Foot. 30)-^ X 23 Inches. — 1264 — each, 3.50 2oj/2 X 33 Inches. — 1545 — each, 23G THE KITTREDGE CORJ^ICE AND ORNAMENT COMPANY. SCROLLS, ETC. The Cuts on this page are to the uniform scale of One Inch = One Foot. i8 Inches. i^i^ Inches. 1447— each, 75 1398 - each, 1425 63^ X 10)^ Inches. 1426 — per pair, 60 1425 — each, .40 Per set as above, i.oo Left. Right. Left. Right. loK Inches. 171^ Inches. 500— per pair, 60 i556_per pair, ^^elt. Right. II Inches. ^jo_perpair, .60 Left. Right. 14^-^ Inches, 1413— pel- pair, THE KITTREDGE CORN^ICE AND ORNAMENT COMPANY. 237 The Cuts on this page are to the uniform scale of One Inch = One Foot. Right. 4 Inches. 1441 — per pair, . . . 15 Left. Right. 4)^ Inches. 1721- per pair, 25 Left. Right. 63^ Inches. 1626— per pair, . . . . .30 Left, Right. Left. Right, Left. Right. 9 Inches. 1% Inches. -]% Inches. 1403 — per pair, 45 1404— per pair, 25 1402— per pair, 35 [9 Inches. 1385 - per pair, Right. •50 Left. night. 16 Inches. 1396 — per pair, i.oo Left. Right. 53^ Inches. Left. Right, iii^ Inches. 1400 — per pair, i.oo 1401— per pan .60 238 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch =One Foot. Left. Tlight. 24 Inches. , 1416 — per pair, i.oo THE KITTREDGE CORXTCE AXI) ORXAMEKT COMPANY. The Cuts on this page are to the uniform scale of One Inch = One Foot. 12 Inches. Right. Left. [5 Inches. .65 1722 — per pair. Right. 9x8 Inches. Left. 1. 00 1377— per pair, 15 X iqS^ Inches. Right. 16^ Inches. [359— per pair, 1.30 Left. Right. 26 X 153^ Inches. 1445— per pair, . 2.00 240 THE KITTREDGE CORNICE AJ^D ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch =One Foot. Left. Right. 271.2 Inches. 1291 — per pair, 1.50 Left. Kight. 22 Inches. 1365 — per pair, 1.50 Left- ^9/4 Inches. Right. 1370 — per pair 1.50 Left. Right. Left. Right. 1^)4 Inches. 16^4 Inches. 1369— per pair, 75 1449— per pair, i.oo THE KITTREDGE CORNICE AJ^D ORJTAMENT COMPANY. The Cuts on this page are to the uniform scale of One Incei=One Foot. c 242 THE KITTREDGB CORNICE AND OKNAMENT COMPANY. RIBBONS, DRAPERY, ETC The Cuts on this page are to the uniform scale of One Inch= One Foot. The parts of Ribbons, etc., here presented, together with many other designs which are always in itocl<, but which are not engraved, admit of many combinations, adapting them to very general use. iij^ Inches. lo Inches. 1639 — each, complete, 50 1627 — each, complete, .45 Left. Right. Left. Right, iij^ Inches. 12 Inches. 1629— per pair, 40 1631 — per pair, 45 I- — - - — _ THE KITTREDGE COKNICE AND ORNAMENT COMPANY. 243 The Cuts on this page are to the uniform scale of One Inch=One Foot, Left. Right. Left. Right. Left. Right, loj^ Inches. ii Inches. 71^ Inches. Left. Kieht. ^ Left. Kight. 121^ Inches. Inches. 244 THE KITTREDGE CORNICE AKD ORKAMENT COMPANY. STEMS AND BRANCHES. The Cuts on this page are to the uniform scale of One Inch = One Foot. The Twigs and Stems here presented are so calculated as to admit of different combinations and ar- xangements, so as to produce in connection with appropriate leaves, very elaborate panel ornaments, spandrel-pieces, etc. 6 Inches. Syi Inches. 51^ Inches. 1353— each, 07 1358— each 07 1368— each, 06 5)^ Inches. 1 7 16 — each, 06 61^ Inches. 717 — each, 06 7 Inches. 1 7 18 — each. .07 6 Inches. 1725— each, 07 6)4 Inches. [649 — each, 08 7 Inches. [668 — each. lol^ Inches. 1673 — each , , , ,15 12 Inches. [672 — each, 25 i6}4 Inches. [671 — each, 50 Left. Eight. 93^ Inches. [662 — per pair, Left. Eight. 133^ Inches. ,70 1667 — per pair, .80 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 245 The Cuts on this page are to the uniform scale of One Inch ==One Foot. 15 Inches. 12 Inches. 18 Inches. 1652 — each, 40 1656— each, 45 1663— each, 65 12 Inches, 12 Inches. 1617— each, 35 1713— each, 35 246 THE KITTREDGE COIIXICE AND ORNAMENT COMPANY. 53^ Inches. [615 — each, , FLUTES. 6 X 23^ Inches, H33 10 4/^ X 1 3^ Inches. 1434 07 X 4 Inches. 1386— each, MODILLION FACES. 247 PRESSED-ZINC CRESTINGS. One of the neatest styles of finish for the top of a house or porch is Pressed Zinc Crestings. They are fastened securely in position by a tube soldered into the back of the perpendicular parts and which slips over a rod screwed to the roof. DIRECTIONS. A tube made of zinc, galvanized iron, or tin, from \4, to ^4 in. diameter, according to size, is to he firmly soldered in the back of the cresting at intervals, according to pattern and height. The tubes should run nearly to the top of each spear-head or elevated portion of the cresting and extend down to roof line, being continued below the bottom of the cresting, according to the height it is to be set above the roof. A wrought-iron rod, in diameter corresponding to the size of the tube, with three to five inches of one end bent and flattened to form a foot, is to pass up each tube. The rod should be long enough to reach the top of the tube. The flattened end should be provided with screw-holes for fastening to roof. If it is desired to have the cresting finish at opposite corners with a similar figure or part of the de- sign, find the center between the two corners and commence by laying the center of a section of cresting immediately over this point, and then join to it in each direction as may be required. The sections of cresting must be soldered together. Cover the foot of each rod to make a water- tight joint. Rods extra. Prices quoted upon application. Tubes, in single faces, extra. The Cuts on this page are to the uniform scale of One Inch =One Foot. iii^ Inches, exclusive of flange. 1260 — per foot, single face, 60 248 THE KITTREDGE CORN"ICE AKD ORN^AMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch == One Foot. 6 Inches, exclusive of flange. 1256 — per foot, single face, . 25 1256 — " double face, 1 13^ Inches. 1257— per foot, single face, 55 1257 — " double face. 1. 40 ^Wff ^wff ^^ir io)4 Inches. 1254 — per foot, single face, ... . , , , 40 1254 — " double face, i.oo 16 Inches. 1251 — per foot, single face, 90 1 25 1 — " double face, 2.40 THE KITTREDGE CORN^ICE AND ORNAMENT COMPANY. 249 The Cuts on this page are to the uniform scale of One Incu = One Foot. 29 Inches. 1259 — per foot, single face, 1.25 1259 — " double face, 2.80 THE KITTKEDGE CORNICE AND ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch =One Foot. ililiiM 32 Inches. 1262 per foot, single face, 2.25 THE KITTREDGE CORNICE AXD ORNAMENT COMPANY. 251 1252 — per foot, single face, 1252 — " double face, .90 2.25 253 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. FINIALS The Cuts on this page are to the uniform scale of One Inch =One Foot, A very large proportion of Finials used in trade are necessarily made to order. The three designs here presented will serve to indicate common styles and prices. y/z feet high. 4^ feet high. 1651— each, 4.00 1655 — each, .. 6,00 254 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. ENRICHMENTS FOR MOULDINGS. In construction, we recommend forming the iron-moulding to such a profile as will allow the Enrich- ment a true and even bed. Trim the Enrichment close and attach by solder and rivets. By continuing the sheet-iron moulding under the Enrichment, a neater stronger, and better job is made. It will be found quite as cheap as the old plan of joining the iron to the zinc Enrichment at each side, while the i difficulties arising from contraction and expansion will be in the main removed. I Our Enrichments are struck in three to seven foot lengths, according to the nature of the design. I They are so calculated so as to allow matching with the least possible waste. The Cuts on this page are to the uniform scale of One Inch =One Foot. inch, exclusive of Flanges. 1006 — per foot, 07 1047 1049 ii^ inches each. 1047— per foot, 10 1049 — per foot, 10 lIMIIllTMIIiriMnilffMIIMl^^^ inches, exclusive of Flanges. 1013 — per foot, 12 2 Inches. 1056 — per foot, . .20 ^tSf"'" '•S>-miflii'>'>"> 2^ Inches. 1059 — per foot, 25 c G THE KITTKEDGE ( ORXICE AXI) ORNAMENT COMPANY. 255 The Cuts on this page are to the uniform scale of One Inch = One Foot. Indies. 1053 — per foot,. 2}4 inches, exclusive of Flanges. 1029 — per foot 2% Inches. 1057 — per foot, 35 Right. ^ Left. Inches. 1452 — per foot, either right or left, 35 I inch, exclusive of Flanges, loio — per foot, either right or left, 08 ^ Right. N Left. C I }4 Inches. 1 23 1 — per foot, THE KITTREDGE CORNICE AND ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch =One Foot. il4 inches, exclusive of Flanges. 1043 — per foot, 4 inches, exclusive of Flanges. 1042 — per foot, 25 c 4^4 inches, exclusive of Flanges. 105 1— per foot, 35 THE KITTREDGE COllIsICE AKD ORNAMENT COMPANY. 257 The Cuts on this page are to the uniform scale of One lNcn=ONE Foot. 0 1232- 5 inches, exclusive of Flanges, -per foot, .50 mm. df}^ inches, inclusive of Flanges. [032 — per foot, 30 5 Inches. 1021 — per foot ^4 circle, in parts, 45 1021 — 31^ Inches. -per foot ^ circle, in parts, 30 - " ^ circle, complete, 60 1035- 1035- 5 inches, exclusive of Flanges. -per foot, without leaves, 4° - " including leaves, .65 (Leaves shipped separately.) 258 THE KITTREDGE CORXICR AIs'D ORi^AMEI^T COMPANY. The Cuts on this page are to the uniform scale of One Inch=One Foot. iij/o inches, exclusive of Flanges. 103 1 — per foot, 60 9^ inches, exclusive of Flanges. 1027 — per foot, 75 8 Inches. 1052 — per foot, 60 3 inches, exclusive of Flange. 1038 — per foot, 22 6% inches, exclusive of Flanges. 1046 — per foot, 25 260 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch=One Foot. Inches. 1015 — per foot, 35 2}y^ inches, exclusive of Flanges. 1014 — per foot 15 4,1^ inches, exclusive of Flanges. 1023 — per foot, 20 4)^ Inches. 103 — per foot, 25 2)^ inches, exclusive of Flanges. 1039 — per foot, 17 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 2G1 The Cuts on this page are to the uniform scale of One Incu =One Foot. 7 Inches. 1024— per foot, .35 io}2 inches, exclusive of Flanges. 1030 — per foot, 60 2I0 Inches. 1016 — per foot J inches, exclusive of Flanges 1048 — per foot, • -20 4 inches, exclusive of Flanges. 1058— per foot, 30 262 THE KITTREDGE CORXICE AI^D ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch =One Foot. 43x^ inches, exclusive of Flanges. 1055— per foot, .35 3 inches, exclusive of Flanges. 1041 — per foot, 25 3 inches, exclusive of Flanges. 1007 — per foot, .25 23^ inches, exclusive of Flanges. 1037— per foot, 15 2 inches, exclusive of Flanges. 1050 — per foot, 20 3V^ inches, exclusive of Flanges. 1045 — per foot, 25 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch = One Foot. 3!/^ inches, exclusive of Flanges. 1004 — per foot, . ... .20 4 inches, exclusive of Flanges. 1005 -per foot 25 33^ inches, exclusive of Flanges, looi — per foot, ,28 6i'4 inches, exclusive of Flanges. 1003 — per foot, 55 264 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch = One Foot. 12 Inches. 1265— per foot, ,60 THE KITTREDGE CORNICE AKD ORN"AMENT COMPANY. 2G5 EMBLEMATIC SIGNS, ETC. The Cuts on this page are to the uniform scale of One Inch =One Foot, except as otherwise indicated. 6. CO 1 701 — each, without base, S-S^ Scale 3^ inch = One Foot. 1622 — each, 15.00 206 THE KITTREDGE CORN^ICE AJTD ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch = One Foot, except as otherwise indicated. 5.00 Scale X inch = One Foot. 41 X 47 inches, thoroughly braced by wrought-iron work. 1610 — complete, each, 14)^ inches, adapted for use as a Gargoyle. 1709— each, complete, THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 17 X 13 Inches. 1390 — complete, single face. . . . i.oo 1390 — complete, double face, . 2.50 Right. Left, 16 Inches. 1431 — per pair, 2.50 36 Inches. 1432 — per pair, 7.00 268 THE KITTREDGE CORKIGE AND ORN"AMEKT COMPAKY. The Cuts on this page are to the uniform scale of One Inch = One Foot, except as otherwise indicated. 8^ X 6 Inches. Scale 3 inches = One Foot. 1740 — without back, 30 1740— with back, 45 9x11 Inches. Scale 3 inches = One Foot. 1550 — without back, 50 1550 — with back, 70 23^ X 1%. Inches. 1296— each, (copper) \% X 21^ Inches. 297 — each, (copper) 1582 — complete, each, . 1582 — without bouquet, 8.00 7-50 ;>70 THE ktttredgp: cornice axd ornament company, SHEET-METAL STATUARY. A book of this description would be incomplete without some mention of the class of work named by the heading above. The facility with which sheet-metal can be worked, readily admits of changes in size, position, drapery, and general arrangement. Hence we have considered designs unnecessary in this connection, and shall confine ourselves to descriptive matter only. We are prepared to furnish, on short notice, the following figures, to any acceptable designs and of any required dimensions: Justice, Cefes, Commerce, Liberty, Industry, Summer, Agriculture, Winter, Columbia, Autum7i, Diligence, Spring, Concordia, America, Flora, Indian Chief, And many others. We are also prepared to execute in an approved manner, and at reasonable rates, -allegorical groups to order. One special advantage of sheet-metal work of this description over all other, of whatsoever material, is its extreme lightness. A figure of Justice with sword, the whole height of figure being some 8 feet 6 inches, weighs only one hundred pounds. Our peculiar construction enables us to accomplish stability and strength in the figure, combined with the minimum of material and weight. It will be readily seen, therefore, that not only is there a saving in the cost of the figure itself, but also that all foundations and supports may be reduced. The expense attending placing in position is also lessened. This last item is especially pertinent to those figures intended for roofs of buildings, towers, etc. Prices on sheet-metal statuary quoted upon application. We require the size of figure, and general design desired, and to know the position from which the figure will be viewed. Prices rule lower than for the same work in any other suitable material. Artistic treatment and skillful workmanship always guaranteed. Correspondence with Architects respectfully solicited. THE KITTREDGE CORKICE AXD OR^^AMENT COMPAXY. 271 CAPITALS. The large assortment of dies owned by this Company, enables us to get up Capitals of ahiiost style and size. The few designs priced herewith will give some conception of what we are always pared to produce. Almost any size of designs similar to those here given can be made on short notii any time and at reasonable prices : o 1754- Height 33/0 inches. Diameter at neck aVo inches. Complete, 2.00 In parts, 1.50 Stamped parts only, 1.25 Abacus 6 inches square. 1753- Height 8j/^ inches. At neck 4 inches square. Abacus 7^ inches square. Complete, as in cut, 2.00 In parts, as in cut, . 1.70 Stamped parts only, 1.40 Volutes, each, (No, 1361) 30 Darts, each, (No. 1362) 05 The construction of the various parts in the above is such as to allow of material variation in size and style. The parts are adapted to use on either round or square columns. Height 6 inches. 1749. Diameter at neck 2)^ inches. Width across abacus 6^ inches. Complete, 1.50 In parts, 1. 25 272 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. Height 27 inches. 1735. Diameter at neck 9 inches. Width across abacus 21 inches. Full capital, coinplete, each. , . . 12.00 Half capital, complete, each, 6.50 Full capital, in parts, each, ........ 9.50 Half capital, in parts, each, 5.00 Dimensions may be slightly varied without extra cost. Height 16 inches. 1731. Diameter at neck 9 inches. Width across abacus 22 inches. Full capital, complete, each, 15.00 Half capital, complete, each, 8.00 Full capital, in parts, each, 13.00 Half capital, in parts, each^ ... 7.00 Dimensions given may be varied slightly without additional cost. THE KITTREDGE CORNICK AND ORNAMHN^T COMPANY. 273 The Cuts on this pae:e are to the uniform scale of One lNcn==ONE Foot. 1730- Height 18 inches. Diameter at neck (octagon) 12 inches. Abacus 2 feet square. Full capital, complete, each, 15 00 Half capital, complete, each, 8.00 Full capital, in parts, each, 12.00 Half capital, in parts, each, 6.50 Capitals of this general description can be made to any required dimensions at proportionate prices. Height 18 inches. 1756. Face of Pilaster 12 inches. Width across abacus 18 inches. Full capital, complete, each, 17.00 Half capital, complete, each, 9-00 Full capital, in parts, each, . . H-S^ Half capital, in parts, each, 8.00 Slight variations in dimensions may be made without affecting price. K 274 THE KITTREDGK CORNICE AND ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of Ome Inch =Oise Foot Height 17 inches 1758. Face of Pilaster 12 inches. Width across abacus 21 inches. Fnll capital, complete, each, 18,00 Full capital, in parts, each, . 14,50 Half capital, complete, each, 9.50 Half capital, in parts, each, 7.50 Slight variations in dimensions may be made without affecting price. \ II I'M I 1733- Height II inc hes. Diameter at neck 91^ inches. Width across abacus 21 inches. Full capital, complete, each, 18.50 Half capital, complete, each, 10.00 Full capital, in parts, each, 14.00 Half capital, in parts, each, 7.50 Dinietisions iiia\ lie varied slightly without extra cost. THE KITTREOGE CORNICE AND ORNAMENT (COMPANY. The Cuts on this i)age are to the uniform scale of One Inch =One Foot. 1732. Height 12 inches. Diameter at neck 8 inches. Width across abaci P'ull capital, complete, each, 19.00 Half capital, complete, each, 10.50 Full capital, in parts, each 15.00 Half capital, in parts, each, 8.00 T3imensions may be varied slightly without extra cost. Height 28 inches. 1736. Diameter at neck 7 inches. Width across abacus Full capital, complete, each, . . 20.00 Half capital, complete, each, 11.00 Full capital, in parts, each, 17.00 Half capital, in parts, each, 9 00 Dimensions may be varied slightly without extra cost. 2?6 THE KITTREDGE CORNK^E AND ORNAMENT COMPANY, The Cuts on this page are to the uniform scale of One Inch = One Foot. 1734. Height 18 inches. Diameter of neck 9 inches. Width Full capital, complete, each 20.00 Half capital, complete, each, il.oo Full capital, in parts, each, 17.00 Half capital, in parts, each, 9.00 Dimensions admit of slight variations without extra cost. :ross abacus 22 inches. 1755. Height 18 inches. Diameter at neck 9 inches. Width across abacus 20 inches. Full capital, complete, each, 25.00 Half capital, complete, each, 13.50 Full capital, in parts, each, 21.00 Half capital, in parts, each 11.50 Dimensions given admit of slight variations without additional cost. THE KITTREDGE COUKICE AND ORNAMENT COMPANY. ^277 The Cuts on this page are to the uniform scale of One Inch = One Foot. Height i8 inches. 1757- Diameter of neck 13 inches. Width across abacus 20 inches. Full capital, complete, each, 24.00 Half capital, complete, each, 13.00 Full capital, in parts, each, 20.00 Half capital, in parts, each, 11.00 Slight variations in dimensions may be made without affecting price. ■unm 1728 Height 22 inches. Diameter at neck 10 inches. Width across abacus 24 inches Full capital, complete, each, 25 00 Half capital, complete each, i3-5o Full capital, in parts, each, 21.00 Half capital, in parts, each, 11.5° Slight variations in dimensions can be made without affecting the price. 278 THE KITTREDGE CORmCK AND ORNAMKNT COMPANY. The Cuts on tbis page are to the uniform scale of One Inch =- One Foot. Height 24 inches. 1737. Diameter at neck 71^ inches. Width across abacus 18 inches Full capital, complete, each 24.00 Half capital, complete, each, i3-00 Full capital, in parts, each, 20.00 Half capital, in parts, each, . 11.00 Slight variations in dimensions will not affect price. 1729. Height 24 inches. Diameter at neck 12 inches. Width across abacus 27 inches. u... T) Full capital, complete, each, 32,00 Half capital, complete, each, 17.00 Full capital, in parts, each, 29.00 Half capital, in parts, each 15.50 Slight variations in dimensions will not affect ])rice. The Cuts on this page are to the uniform scale of One Inch = One Foot. 1738. Height 26 inches. Diameter at neck 12 inches. Width across abacus 33 inches. Full capital, complete, each, 34-00 Half capital, complete, each, 18.00 Full capital, in parts, each, 30.00 Half capital, in parts, each, 16.00 Slight variations in dimensions will not affect price. 1750- Height 2 feet 3 inches. Diameter at neck 10 inches. Abacus 2 feet square. Jn parts, not including abacus and bell, for full capital, 12.50 In parts, not including abacus and bell, for half capital, . . ... 7.00 In parts, including abacus and bell, for full capital, 17.00 In parts, including abacus and bell for half capital, 9-00 Full capital, complete, .... 20.00 Half capital, complete, 11.00 280 THE KITTREDGE CORXICE AXD ORJTAMENT COMPANY. SPUN BALLS. We present lists herewith of both Half-Balls and Complete-Balls, the latter being machine joined. In style and finish these goods are without equals in the market. The Cuts on this page are to the uniform scale of One Inch =One Foot. CI inch. 4 inch. 12 inch HALF-BALLS. SPUN-ZINC. inch, per hundred. 3 4 5 6 6K 7 VA 8 9 lO 1 1 12 13 14 15 i6 17 2.50 3.00 4.00 4 50 5.00 6.00 7.00 8.50 10.00 11.50 14.00 16 00 18.00 21.00 25 00 35-00 50.00 65.00 90.00 115 00 135.00 160.00 185.00 215,00 260.00 OTHER SIZES TO ORDER. COPPER AND BRASS HALF BALLS TO ORDER. 1/2 2 3 Z% 4 4M 5 5>^ 6 6/3 7 V/z 8 9 10 1 1 12 COMPLETE BALLS. Machine joined. SPUN-ZINC. each 10 II .13 14 20 22 24 32 35 38 48 52 56 ; 62 80 1-05 . . 1.40 1.70 , 2.20 OTHER SIZES TO ORDER. THE KITTEEDGE CORNICE AND ORNAMENT COMPANY SPUN BALUSTERS. Other sizes and designs than those here presented are made to order, at proportionate rates, and on very short notice. The Cuts on this page are to the uniform scale of One Incii=One Foot, 14 X 8 Inches. 1681 — 14 inches high, 8 inches greatest diameter, each, in parts 85 Complete i.oo 1681 — 16 inches high, 9 inches greatest diameter, each, in parts i.oo Complete 1.15 1681 — 18 inches high, 10 inches greatest diameter, each, in parts 1.20 Complete 1.35 Square blocks for cap and plinth e.Ktra. 22 X 1 1 inches, exclusive of cap and plinth. 1640 — 20 inches high, 10 inches greatest diameter, each, in parts..,. i.io Complete 1.30 1640 — 22 inches high, 11 inches greatest diameter, each, in parts 1.25 Complete. .... 1.45 1640 — 24 inches high, 12 inches greatest diameter, each, in parts 1.50 Complete 1.75 1640— 26 inches high, 13 inches greatest diameter, each, in parts 1.80 Complete 2.15 Above prices do not include cap and plinth. 2S*^ THE KITTREDGE CORKICE AND ORNAMENT COMPANY. The Cuts on this page are to the uniform scale of One Inch= One Foot. 14 X 6 Inches. I 1679- 12 inches high, 5 inches greatest diameter, each, in parts 65 I ^679 — 14 inches high, 6 inches greatest diameter, each, in parts 70 I 1679 16 inches high, 6^ inches greatest diameter, each, in parts 80 1679—18 inches high, 7^ inches greatest diameter, each, in parts .90 I 1679 — 20 inches high, 8^ inches greatest diameter, each, in parts. i.oo Square blocks for cap and plinth extra. .65 Complete 75 .70 Complete 80 .80 Complete 95 .90 Complete 1.05 1,00 Complete 1.20 Complete 75 Complete 80 Complete ... .95 Complete 1.05 Complete .... i 20 1680 — 12 inches high, 4!^ inches 1680 — 14 inches high, 5 inches 1680 — 16 inches high, 6 inches 1680 — 18 inches high, 7 inches 1680—20 inches high, 8 inches 16 X 6 Inches. greatest diameter, each, in parts greatest diameter, each, in parts greatest diameter, each, in parts greatest diameter, each, in parts, greatest diameter, each, in parts Square blocks for cap and plinth extra. THE KITTKEDGE CORNICE AND ORNAMENT COMPANY. 2S3 The Cut on this page is to the scale of One Inch = One Foot. 26 X II inches, exclusive of cap and plinth. 1657 — 24 inches high, 10 inches greatest diameter, each, in parts 1,35 Complete 1.60 1657 — 26 inches high, 1 1 inches greatest diameter, each, in parts 1.70 Complete 2.00 1657 — 28 inches high, 12 inches greatest diameter, each, in parts....,,., 2.10 Complete . .. 2.50 Above prices do not include cap and plinth. 284 THE KITTREDGE CORNICE Ai^^D ORNAMENT COMPANY. SPUN URNS. Urns and Vases are almost always made to special designs, adapted to the special features of archi- tecture employed. We price only two very plain styles. Special patterns made to order on short notice and at reasonable rates. The Cut on. this page Is to the scale of One Inch =• One Foot. 48 X 16 Inches. 1643 — each, in parts , , .. 3.50 1643— each, complete 4.25 Any style and size to order. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. !>85 The Cut on this page is to the scale of One Inch =One Foot. 30 X 10 Inches. 1653 — each, in parts 2.00 1653 — each, complete 2.50 Any style and size to order. 286 THE kittrp:dge cornice and ornament company. SIGN MORTARS. Other sizes and styles than those given are made to order at proportionate rates. The Cuts on this page are to the uniform scale of One Inch = One Foot. 1 8 inch. 1682 - 8 X 8 inches, each, in parts 1682 - 12 X 12 inches, each, in parts 1682 — 18 X 18 inches, each, in parts 1682 — 24 X 24 inches, each, in parts 12 inch. 8 inch. . . 1.60 Complete 2.00 .. 2.00 Complete 2.50 . . 2.50 Complete 3.00 • • 3-50 Complete 4.25 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 287 SPUN FRONTS FOR BRACKETS AND MODILLIONS. In the following Lists the Fronts are priced for full circles. Where it is required to cut them, there will be the additional extra charge of the cost thereof. Special sizes and styles arc made to order at all times, at rates proportionate to those herein priced. m 1593- The prices are for each roll (full circle) joined complete. Face Width miu. 2Kin. 31^ in. 4 in. 4Xin. Sin. e^in. 7 in. 7Kin. 8 in. 2}4 in. diameter .20 .21 .22 .23 2% .21 . 22 •23 .24 3 " •23 24 •25 .26 3^ " .24 •25 .26 .27 3^0 " ■25 .26 .27 .28 •29 3^ .26 .27 .28 •30 •32 4 " .27 .28 . 29 •32 • 33 A'i .28 .29 •32 •33 •34 5 " .29 •30 •31 •34 •36 " •31 •32 •35 •37 .41 •45 6 " •32 •34 •37 .40 •43 •47 6>2 " ■34 •37 .40 •43 .46 •50 7 .36 •39 .42 •44 •47 •51 " .40 ■44 .46 •50 •53 •56 8 " .42 •44 .48 •51 .55 •59 ^'A " •44 .47 •50 •54 •57 .61 9 " .50 •53 •57 .60 .62 .67 " .... .52 •57 .60 •63 .67 •71 .76 lO " .... •57 .60 .64 .68 .72 .76 .80 other styles and sizes at, proportionate rates. 288 THE KllTHEDGE CORNICE AND OKN^AMENT COMPANY. 1594- The prices are for each roll (full circle) joined complete. 2Kin. 33^ in. 4 in. 4Xin. 5 in. .5Kin. 6Kin. 7 in. 7Kin. 2,y4> in. diameter. . . • 23 • -^4 26 • ^4 • -^D .26 27- 3 .26 27 28 o l/ << ■27 .28 29 •3<^ 3>2 ' .28 30 •3^ •3-^ ZYa " "3 T •3^ 32 •33 •34 4 " 1 T 33 •34 •35 4/l2 • J-' • Jo 34 ^6 •3" •27 •6/ 5 11 •00 ■ J4 35 •? 7 •37 iR '6^ 5/4 ^6 •0" Id oy .40 •43 A 7 • 4/ c 1 • DO 6 " •38 41 •43 •45 •49 •55 •39 43 •45 •49 •55 •59 7 " .40 1 • 44 .46 •50 .56 .60 1% " 45 •47 •53 •57 .61 •63 8 " 46 .48 .54 •58 .62 .65 ^72 50 •53 •57 .60 .65 .68 9 " .54 •58 .61 .67 .70 .77 9)^ " •57 .60 .62 .70 •75 .87 lO " .60 .64 •73 .80 .90 other sizes and styles at proportionate rates. P 11 ^595- The prices are for each roll (full circle) joined complete. 4 in. 5 in. 5>^in. e^in. Tin. Sin. ! 2j;^ in. diameter •35 2 3/ " .36 •37 •39 •38 .40 O / 2 •39 .42 •45 ^3/ «' .41 .44 •47 /I ' ' •43 .46 .49 •45 .48 •51 •47 .50 •54 5^ .49 •53 •57 .62 .67 6 •51 •55 .60 .65 .70 •54 .58 •63 .68 .73 7 " •57 .61 .66 .71 .76 " .60 .64 .69 •74 •79 .84 8 •63 .67 .72 .77 .82 .88 8>2^ " ' .66 .70 •75 .80 .85 .91 9 " •74 •78 .83 ! .88 .94 1 .02 9>o " •77 .81 .86 1 .92 •99 1.07 I-I5 lO . " .80 .84 .96 1 .04 1 . 12 1 . 20 j 1 1 1 other sizes and styles at proportionate rates. PRACTICAL ILLUSTRATIONS OF THE USE OF ARCHITECTURAL SHEET-METAL WORK, EMBRACING THE DETAILS OF THE ORNAMENTAL FINISH FURNISHED BY The Kittredge Cornice and Ornament Co. FOR THE ART GALLERY, Centennial Exhibition, MAIN BUILDING, " " COURT HOUSE, Van Wert, Oliio, SCOTT BLOCK, Erie, Penna., AND OTHER IMPORTANT BUILDINGS. ROBISON, SAVAGE & CO., PRS, CLEVELAND, O. The following illustrations are photo-engravings from the work itself, and may be depended upon as faithful representations, both as to the general design and the smallest detail. Entered according to act of Congress in the year 1876, by the Kittredge Cornice and Ornament Company, in the otRce of the Librarian of Congress at Washington. THE KITTREDGE COKXICE AXD ORNAMENT COMPANY. 315 ART GALLERY. CEITTEITITIAL EXHIBZTIOIT. The sheet-metal work employed in this building, of which the principal items of illustrations will be found on the following pages, embraces the ornamentation against the granite, of the frieze over the principal front ; also, the frieze at ends, the spandrel ornaments over front entrance, and in the ]3avilions. It also embraces the cresting on pavilions, and at ends of building, the pedestals on pavilions, the balustrade and the exterior finish of dome. In the interior the entire finish of dome, and the cornices of the principal picture galleries are of sheet-metal. The statuary and eagles are of cast zinc. 310 THE KITTREDGE CORXICE AND OR^^AMENT COMPA^IY. No 1762. DATE TABLETS, ON PRINCIPAL FRONT. Scale }4 inch == One Foot. Details, Art Gallery, Centennial Exhibition. 318 THE KITTKEDGE COEXICE AND ORNAMENT COMPANY. THE KITTKEDGE CORKICE AKD ORNAMENT COMPAl^Y. 319 No. 1761. SPANDREL PIECE, PRINCIPAL FRONT. OAK AND LAUREL BRANCHES. Scale % inch = One Foot. Details, Art Gallery, Centennial Exhibition. 320 THE KITTREDGE CORKICE AND ORNAMENT COMPANY. No. 1764. SPANDREL PIECE, PAVILIONS. Scale yi inch = One Foot. Details, Art Gallery, Centennial Exhibition, THE KITTREDGE CORIvnCE AND ORNAMENT COMPANY. 321 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 323 324 THE KITTREDGE CORNICE AKD ORNAMENT COMPANY. No. 1597. FLOWER GARLAND, ORNAMENTATION OF FRIEZE, ENDS. Scale }4 iiich = One Foot. Details, Art Gallery, Centennial Exhibition. THE KITTKEDGE CORNICE AKD ORNAMENT COMPANY. 325 No. 1596. FRUIT GARLAND, ORNAMENTATION OF FRIEZE, ENDS. Scale X inch = One Foot. Details, Art Gallery, Centennial Exhibition. 3^6 THE KITTREDGE COEKICE AND ORNAMENT COMPANY. No. 1739. No. 1746. ORNAMENTATION OP FRIEZE, ENDS. Scale 1 inch = One Foot. Details, Art Gallery, Centennial Exhibition. THE KITTREDGE CORNICE AIS"D ORI^-AMENT COMPAN"Y. 32 No. 1 194. PEDESTAL, ON PAVILIONS. Scale yi Inch = One Foot. Details, Art Gallery, Centennial Exhibition, 328 THE KITTREDGE COENICE AND ORNAMENT COMPANY. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. No. 1598. LAUREL GARLAND, ORNAMENTATION OF FRIEZE OF PRINCIPAL COR- NICE OF DOME. Scale li inch = One Foot. Details, Art Gallery, Centennial Exhibition. THE KITTREDGE CORNICE Ai^D ORN^AMENT COMPANY. 333 334 THE KlTTKEDGf: COK^^ICE AND ORNAMENT COMPANY. No. 1763. CORNICE IN LARGE PICTURE GALLERIES. Scale )4 inch = One Foot. Details, Art Gallery, Centennial Exhibition. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 33r) No. 1 192. PRINCIPAL CORNICE, INTERIOR OF DOME. Scale X ii3ch = One Foot. Details, Art Gallery, Centennial Exhibition. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 337 MAIN BUILDING. OEITTEITITIAL EXHIBITION. The sheet-metal work employed in this building, consists of the turrets, with finials and eagles, the capitals in principal entrances, together with spandrel pieces, and cornice above same, the trophies over principal entrances and the trophies on corner towers. We confine our illustrations to the zinc orna- ments. 338 THE KITTREDCIE ( ORXirE A XI) ORXAMEXT (^OMPAXY. No. 1610. EAGLE SURMOUNTING TURRETS. Scale K inch = One Foot. No. 1635. No. 1636 FINIALS ON TURRETS. Scale K inch = One Foot. Details, Main Building, Centennial Exhibition. THE KITTEEDGE COKNTCE AND ORXAMKNT COMPANY. No. 1637. FINIAL ON FLAG STAFFS. Scale ]4 inch = One Foot. No. 1260. CRESTING OVER CAPITALS IN PRINCIPAL ENTRANCE WAYS. Scale 1 inch = One Foot. No. 1748. CAPITAL IN PRINCIPAL ENTRANCE WAYS. Scale y> inch — One Foot. Details, Main Building, Centennial Exliibition. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 341 No. 1747. ORNAMENT IN FRIEZE, PRINCIPAL ENTRANCES. Scale K inch = One Foot. No. 1744. — Rose Spandrel with Motto. No. 1743. — Ivy Spandrel. SPANDRELS OVER PRINCIPAL ENTRANCES. Scale 3^ inch = One Foot. Details, Main Building, Centennial Exhibition. 342 THE KITTEEDGE COKXJCE AND OKXAMENT COMPANY. No. 1741. OAK SPANDREL WITH STAR PRINCIPAL ENTRANCES. Scale yi iiich = One Foot. Details, Main Building, Centennial Exhibition. th£: kittredge corxk e axd ornament company. I No. 1742. OAK SPANDREL, PRINCIPAL ENTRANCES. Scale }4 inch = One Foot. Details, Main Building, Centennial Exliibition. 344 THE KITTREDGE CORXICE AND ORNAMENT COMPANY. FmiALS ON TURRETS. Scale inch = One Foot. Details, Main Building. Centennial Exhibition. THE KITTREDGE CORNICE A^T> ORN^AMENT COMPAKY. 346 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. TROPHIES OVER PRINCIPAL ENTRANCES. Scale '% inch = One Foot. Details, Main Building Centennial Exhibition. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 347 TOP OF FLAG STAFF OVER PBmCIPAL ENTRANCES. (Above trophy, as shown on opposite page.) Scale yi inch== One Foot. Details, Main Building, Centennial Exhibition. NEW COURT HOUSE, Van Wert, Van Wert Co., Ohio. THE KITTREUGE CORN-ICE AND ORNAMENT COMPANY. VAN "WEET, OHIO. '4 Q n the oppocitc p ag€ we present a cut of the Court House built at Van Wert, Ohio, season of 1875- '76, to the plans and specifications of T. J. Tolan & Son, of Ft. Wayne, Ind. This building is remarkable for the free use made of Sheet-Metal finish, botli upon the exterior and interior, and the fine effect thereby obtained with a minimum of cost. Van Wert is situated in a section of country wherein no good building stone is to be found, and so far removed from quarries of first-class stone, that transportation renders its use almost out of question. In this building the entire exterior finish, from top of basement story upwards, is of galvanized iron, with pressed zinc trimmings. This in- cludes belt-courses of first and second stories, quoins at exterior angles, finish around windows and front entrance, main cornice and balustrade, dormer window^ and other mansard finish, and tower work. C. ' The walls are of pressed brick. In construction the entire building is, fire proof. The sheet-metal work is put up on, and supported by, bar iron braces and look-outs of the most approved construction, and throughout is strong, firm and substantial. The quoins are constructed of cushion-pattern crimped-iron, presenting a close resemblance to cut stone. The sheet-metal work has been painted and sanded, and to the casual observer the building cannot be told from one constructed with stone trimmings, while the eye is as well pleased with the lines in this building as though it were one made of stone. The critic will find nothing lacking in stability, solidity, or durability; and the tax-payers of the county have an edifice of which they are justly proud, while the burden is far less than it could have been had the building been constructed of other material. 0n the folk>wi4>g-page rri1l hr fonnrl a detail of Main Cornice, with section of quoins and window trimming. THE KITTKEDGE CORNICE AND ORNAMENT COMPANY. 351 t DIAGRAM OF IRON LOOKOUTS IN MAIN CORNICE AND GUTTER. Scale 1 inch == One Foot. Details, Sheet-Metal Finish, Court House, Van Wert, Ohio. 352 THE KTTTREDGE CORNICE AKD ORNA.MENT COMPANY. ELEVATION SCOTT BLOCK, Erie, Penn. THE KITTREDGE CORNICE AKD ORNAMENT COMPANY. 353 SCOTT BLOCK, ^ EBZE, FENIT. This building, of which we present an elevation on t4ie apfiasite - page-, and details of parts of the sheet-metal finish on succeedifig-pages, is a characteristic example of "trade work" as carried on by the Kittredge Cornice and Ornament Co. The sheet-metal work was put up by Messrs. M. Mayer & Son, of Erie, aod-alr thottg h - Qne-of the first contracts in the line ever handled by them, it is pronounced by com- pCLteJlLand disinterested observers as one of the best and most complete jobs in the country. For straight lines, close joints, and thorough construction, few jobs of sheet-metal work equal it. The architects of the structure were Messrs. Porter and Watkins, of Buffalo. The front is of cast- iron. The sheet-metal work commences with the main cornice and includes the dormer windows, balus- trade, deck finish and hip moulding. The mansard is covered with slate, and the deck with tin. 354 THE KITTEEDGE CORKICE AKD OBNAMEIn^T COMPAKY. MAm CORlSriCE. (DesfgnUoT^.) Scale % inch = One Foot. Details, Scott Bloclc, Erie, /Pa. THE KirXREDGE CORNICE AND ORNAMENT COMPANY. 355 DORMER WINDOW OVER SIDE ENTRANCE. ( ^aign No. 9 45rj — Scale X i"ch = One Foot. Details, Scott Block, Erie, Pa. 356 THE KITTREDGE CORNICE AKT) ORN'AMENT COMPANY. / THE KITTREDGE CORNICE AND ORNAMENT COMPANY. MAIN COBNICE, CLARENDON HOTEL, MT. VERNON, OHIO. (Design No 949,) Scale X i^ich = One Foot. THE KITTREDGE CORJ^ICE AND ORNAMENT COMPANY. 359 Y. M. C. A. BUILDING, baltzmoue, md. This building, by its use of sheet-metal finish, as well as its commanding location and imposing ap- pearance, IS quite as noticeable as any building lately erected in Baltimore. The sheet-metal work in- cludes the main cornice, ventilating turrets and tower work. The galvanized iron-work was manufactured by the Kittredge Cornice and Ornament Co., as a "trade order," for Jno. G. Hetzel, of Baltimore, the contractor for this pan. In putting up, the work was managed with distinguished skill and mechanical ability, and reflects great credit upon the contractors. The architects of the building were Messrs, Niernsee and Nielson. of Baltimore. 360 THE KITTEEDGE CORNICE AND ORNAMENT COMPANY. SPECIAL BUILDING ERECTED BY THE KITTREDGE CORNICE AND ORNAMENT COMPANY, • FOR THEIR EXHIBIT CENTENNIAL EXHIBITION. de8ig:^8 and peices OF SHEET-METAL CORNICES, WINDOW CAPS, DOMER WINDOWS, Mouldings, Gutters, Ridgings, RAISED LETTERS, ETC, ETC, MANUFACTURED FOR THE TRADE BY THE Kittredge Cornice and Ornament Co., SALEM, OHIO. All the Price Lists issued by the Kittredge Cornice and Ornament Company are subject to liberal discounts, (to the trade only,) according to quantity ordered, and condition of markets. Discounts are the subject of special arrangement by correspondence. Persons not known to us, to receive prompt and satisfactory attention, are invited to accompany their inquiries with reference. Estimates on Architects' designs made at any time. Drawings may be sent by express at our expense. We will return the same promptly with proposition. Our goods will at all times be sold as low as any others of equal merit. Our prices average below the ordinary cost of manufacturing. THE KITTREDGE COllXICE AXD ORXAMEXT COMPANY. 3G3 "FOR THE TRADE/' A Careful Perusal of the Following is Requested. The rapid increase in the demand for Galvanized-Iron Cornices has been a matter of keen interest to all in the trade. There is hardly a tinner from Maine to California who makes a spe- cialty of out-door work but has received repeated calls for work in this line in one shape or another. Sometimes it has been window-caps, sometimes a moulded-gutter, again ridging; for slate-roofs, and not seldom for cornices. Some of the keenest of the craft, those of means and enterprise, when located where a demand seemed to justify the investment, have launched bold- ly in at cornice manufacturing. Their fellows, located in smaller towns, where the demand for these goods would not alone justify a factory, have been compelled to sit with folded hands while jobs were taken at their very doors by their more fortunate neighbors. Many of the cornice-shops, so-called, started in response to the demand as above described, have dragged out a precarious and uncertain existence, on account of lack of knowledge, miscal- culations, inexperience, bad management, and other kindred causes. The investment in machine- ry has frequently been more than the capital employed would justify. The greed for work has turned attention to the field rather than to the shop. Hence, prices have been cut down, expen- ses multiplied, and no steps been taken to better the facilities for manufacture, and to keep pace in a business-like way with the demands of the times. The organization of the Kittredge Cornice and Ornament Company has been based upon the necessities growing out of these various needs. It proposes to do the Head-work, the Pattern- work, and the Machine-work "FOR THE TRADE." As a result of careful organization, com- plete equipment with special steam power machinery, large sales and minimum of expenses, it is prepared to sell to the trade work in this line below the ordinary cost of making it in any shop in the land. Its relationship to the tinner is the same as a planing mill to a carpenter. Order here what you want, as you want it, and with the assurance of getting it better in quality and cheaper in price than it can be made in your own shop or that of your neighbor. The small cornice-manufacturers of the country, who are now doing a limited business and without profit, will find that an investigation into our oflers will amply repay them. Tinners who are now deprived of their legitimate trade by the encroachments of their fel- lows who connect cornice-work with tin-work, will find herein a weapon of defence, as well as an element of profitable increase of trade. The Kittredge Cornice and Ornament Company are now furnishing regular supplies to seve- ral hundred tinners and cornice-workers upon this general plan. It cordially invites correspon- dence with all in the trade relative to this method of business. The following pages are but a very imperfect presentation of our system of business, but if they shall be the means of stimulat- ing further inquiry, we shall have accomplished a satisfactory result. 364 THE KITTEEDGE COKNICE AND ORNAMENT COMPANY. How to Order Sheet Metal Cornices, Etc. It is always necessary at the factory to know the exact dimensions of the building on the line of face of wall against which the cornice is to rest. State the number of brackets and mo- di llions, and indicate their respective positions. When miters are to be made at other than right angles, a diagram should be sent. Where practicable, send a rough diagram of the entire build- ing, like the following, not necessarily to scale, but always with dimensions in figures. A glance at it will indicate the number of brackets and modillions, their position, the location of miters, etc. \ n 1 PLAN of BUILDING 1 . 1 1 — I — 1 SHOWING CORNICE SCALE /8im=!ft. ZD =□ FRONT 1=1 u u u u u u u u u of th^^^^^k ^^^^"^^^"^ ^"^^ ^ ^^^^ ^^^^ ^ ^^^^ explanation, describing any peculiarities THE KITTREDGE CORKICE AKD ORNAMENT COMPAKY. 3G5 Kame the Job. With several orders from one customer, or from different customers in the same town, much confusion sometimes arises foik lack of a distinguishing name for each job. Very often it is desirable to know the name and address of the owner of the building, also the name and address of the builder. It is always desirable to know the name and address of the architect. State whether any discretion as to modification of forms and profiles, or variation in con- struction is admissible. Very few jobs come to hand in which a reasonable discretion allowed us will not result in more satisfactory work than to execute the drawings to the letter. We never change a piece of work to its detriment. We sometimes desire a change for mechanical and con- structive reasons. Yet we meet some who are so arbitrary as to allow no discretion whatever, insisting that their own preconceived notions are better than those backed by special experience and long study. Hence our request to state whether discretion as to modification is allowed. Where practicable, accompany the order and plan before described with one or more of the elevation drawings. When necessary the same will be copied by us and immediately returned. Feont Elevation or BurLDmG — Scale, }i inch = 1 foot. ! 3GG I THE KITTREDGE CORKICE AKD ORNAMENT COMPANY. Where cornices are ordered for store-fronts, indicate what finish is required at the ends, whether a return, or double-return, stop-block or truss. Say whether cornice is for a building in progress of erection, and intended to bewailed in, or for a building already finished and to be attached from the outside. A difi'erence in construction is necessary. State whether intended for putting up on iron-supports or upon wood. A difference of con- struction is necessary for convenient handling. Statespecificallyin what shape work is to be shipped; whether completed or cut and formed only. It frequently happens that some parts of the work are wanted cut and formed only, and others are wanted completed. Orders are filled as customers may want them. Parts of cornices may be ordered as well as entire structures. W ork ordered cut and formed only, assures a reduc- tion in freight of 25 to 75 per cent. Careful directions for putting together accompany each ship- ment in this shape. In ordering parts of jobs the full set of drawings is always desirable. Questions of joints, construction, and relative arrangement of parts frequently arise, which can only be settled by reference to the complete drawings. Order early. Work cannot be made without the lapse of time. Transportation consumes more or less time, according to circumstances. It is better to have work on hand a month earlier than is required for use, than to have it one day too late. Unseemly hurry in the making of work is attended with unsatisfactory results, both to manufacturer and to buyer. In ordering window trimmings and other similar work, give width of frame from out to out, and distance from sets back from face of wall. If caps are for segment shaped heads, give radius of head. If for frames with heads of elliptical form, or other irregular shape, accompany order with full size drawing or templet of same. State whether caps are for walling in during process of erection, or to be put up on the out- side after the building is completed. A difference in construction is necessary. Directions as to route of shipment, where any preferences exist, should always accompany an order. THE KITTEEDGE CORInICE A?TD ORXAME^^T COMPAXY. 367 Names of Orders and Kstimates. In sending in drawings for estimates or in ordering work, if correspondents will kindly give the name of the building, the name and address of the architect, and, when convenient, the name of the owner and builder also, it will be giving us information which will facilitate the course of business materially. We frequently have four to six orders or drawings for estimates from one correspondent at one time. Without some specific name for the jobs, correspondence concerning the work becomes quite perplexing. All orders, after entry upon our books, are known by a number, and are so designated throughout our shop during course of manufacture and shipping. Ordinarily in acknowledging receipt of an order from a correspondent, we name the number by which it will be known. Very frequently, however, this is not sufficient to iden- tify the orders for correspondence. A short time since we received three orders from one indi- vidual, which were entered by numbers, and the same reported to him. A few days later there was sent in an amendment to his orders, and an inquiry concerning the progress of his first order. As the first two of his orders arrived the same day, we were unable to tell which was the order designated as the ^rsf, and from lack of information we were unable to describe them sufficiently explicit in acknowledging their receipt to enable him to use the numbers in describ- ing them afterwards. So a letter of inquiry from us was necessary before we could answer his question intelligently. Supposing a customer sends in two orders, we enter them as No. 1,950 and 1,951, for example. Now if we know that one is for Brown's building and the other for Jones's, we acknowledge receipt of the order, saying, " we enter order for Brown's building as No. 1,950, and for Jones's building as No. 1,951." This gives a basis of understanding for future correspondence that is unmistakable. The additional information as to address of owner, archi- tect and contractor, are all of frequent importance in subsequent correspondence. Some of these requirements may seem unnecessary, but when it is remembered that we frequently have over a hundred orders in progress at one time, each of which may be to the customer of prime import- ance and therefore easily designated in his mind without a specific name, while none of them to us have a distinguishing feature, save as the same may be furnished as above requested, the importance to us of such information will be appreciated at once. 3G8 THE KITTREDGE CORKICE AKD ORKAMEJy^T COMPAI^Y. Time Required to Fill Orders. Could cornice-work be carried in stock like stoves, or mantels and grates, there would be no need of time in which to execute an order, other than that consumed in getting it ready for ship- ment. Or were orders made in such a way as to admit of patterns being always kept on hand, as in the case of some other lines of goods, the need of time would be less. But the condition of things is very different. Galvanized-iron work is invariably made to suit the conditions of a building, either in design, dimensions, construction, arrangement of parts, methods of putting up, or some similar subordinate point. Of over two thousand orders executed by this company, no two of them have been alike in all these particulars ; not even those which have been ordered as duplicates. There is always some calculation to be made concerning attachment to the adjoin- ing cornice, or to accommodate some other special feature. The time may come — we believe it near at hand in some classes of work — when the parts of cornices, mouldings, etc., will be carried in stock, but at present the conditions and experience of trade at large do not admit of it. Hence, when an order is to be executed, it passes through all of the several distinct steps or processes, whether it be large or small. A rehearsal of these several steps may be the means of making our meaning better under- stood. An average job requires 1. Drawings, 2. Patterns, 3. Cutting, 4. Forming or Shaping. 5. Joining, 6. Packing for Shipment. Each of these distinct operations must be performed before the next can be commenced at all. To run a large factory economically, there must always be an abundance of work in hand to perform. Division of labor, to a certain extent, is absolutely essential. Hence, it is very easy to see how a space of time is necessary to set apart for each order, which will allow it to take its proper turn in the passage from one step to the other. We are somewhat explicit in thus giving reasons. It is popularly supposed that cornice-work is of rapid manufacture. That is true; but the best results are always obtained, both as concerns cost and as concerns quality of work, by following a plan of more moderate speed. Hence, we beg of our customers to give their orders in advance of needing them. Do not suppose a cornice can be made and shipped a distance and arrive almost as soon as the order can be written. People are somewhat unreasonable at times. We have had orders peremptorily inquired after by telegraph, before the letter containing the order was received. Orders under special circumstances can be preferred — that is, placed before others received earlier; but this can only be done at additional cost, and is objectionable. So we beg our friends to allow us always three weeks, and just as much more time as possible. This applies to finished work only. Plain mouldings can be shipped ordinarily at two days' notice. Cut and formed work at from a week to ten days after receipt of order, while zinc ornaments and trimmings are always in stock and are shipped at sight. With each order give explicit directions as to the time it will be wanted, so that it can be de- clined if it be impossible to comply with the requirements. Special time on orders, always made the subject of agreement. THE KITTREDGE COKNICE AJ^D OKN'AMENT COMPAXY. 369 Shape in which Vv^ork is Shipped. All work shipped by the Kittredge Cornice and Ornament Co. is carefully boxed or crated, according to the nature of the parts. Cornices are shipped in parts. The various mouldings are nested together and crated. Brackets, modillions and dentils are packed by themselves. Trusses and stop blocks are shipped in separate packages. Frieze pieces are crated separate from other parts. Care is always taken to get the work in the most compact shape possible, in order to obtain the most favorable rates of freight. Window caps, where their shape and size will admit, are shipped in complete structures of four to six to the crate. Where necessary, they are sent from the shop in parts of convenient size for handling, which in turn are crated as compactly as possible. Dormer Windows — ordinarily pack one to a crate. Where too large for handling in this shape, they are shipped in parts most convenient for handling and packing. House Fronts and other similar work are constructed in parts convenient for handling and shipping. Gutters, Eidging and Stock-Mouldings nest in crates, in weight from seventy-five to three hundred pounds each. Miters are made with as short arms as is compatible with good construction, and are crated. Cut and formed work is boxed, and is shipped at very low rates, being solid, heavy packages. 370 THE KITTJIKDGE CORNICE AND ORNAMENT COMPANY. Cut and Formed Work. It will be noticed that all the lists throughout the book are made in duplicate — Cut and Formed and Complete. By the latter is meant work finished ready for putting up. By the former is meant work finished with the exception of joining — i. e., ready to solder. The advantages to the trade, of buying work in Cut and Forme q shape are very con- siderable : 1. Freight is reduced from 25 to 75 per cent. 2. Cost of packing and drayage is reduced. 3. There are no possible damages from rough handling during transit. 4. Work putting together, is provided for home mechanics, for dull seasons, and stormy weather. 5. A given job can be obtained from the factory on shorter notice. Various other advantages of greater or less importance will readily suggest themselves to the mind of every one giving the matter any attention. By a carefully devised system of construction and manipulation, this branch of business has been brought to a high degree of perfection. Every set of pieces, in any given job, before leav- ing the factory, is marked. A drawing accompanies the work whereon are corresponding marks and numbers, so that no question of construction or joints can arise. Where necessary, (accord- ing to agreement in each instance) a sample piece will be put together and shipped along. To the trade living at any considerable distance from us, this plan of business has particular interest. To the general trade it is of great importance. The advantages above recited in detail are sufficient to indicate all this. I THE IvITTKEDGE CORlsICE AND OR^STAMENT COMPAKY. METHODS OF PUTTING UP SHEET-METAL CORNICES. Sheet-Metal Cornices are made of such a variety of patterns, of such a wide range of sizes, and are required to be placed in such a diversity of situations, that the methods of construction must needs vary from time to time. The choice of workmen, the habits of mechanics, and other incidental causes, often aflfect the shape and style of work, as well as the considerations above mentioned. The diversity of style of cornice is such that they have few parts in common. Very many designs, however, indeed a large proportion of the styles employed, corresT)ond as far as having mouldings continuous through their length. All are supported by projecting brackets or look- outs. The question of joints, and shape and material of lookouts, together with construction of the latter, are almost the only features which can be discussed in a general way. PUTTI1T& UP A aALVAlTIZED-mOlT COHITICB OIT 'WOOD SUPPOHTS- The accompanying cut shows at a glance the parts and joints in a sheet-metal cornice, as ordinarily constructed. No. 987. 372 THE KITTREDGE CORI^ICE AND ORJ^AMEKT COMPANY. The lower flange of the foot-moulding is constructed with a downward projecting member, which serves the double purpose of a gauge in setting the moulding, and of a cover for any small inequalities and irregularities in the brick work. The joints between the foot-moulding and the frieze-pieces, and between the frieze-pieces and the modillion-course, or dentil-course above, are made by extending the flange of the lower of the two pieces, with a small edge turned up, into the wall sufficiently far to receive a bearing of brick. The upper flange is of proper dimensions to extend into the wall against the edge of the lower. This construction forms a ready gauge for setting correctly. The joint is finished by riveting through the two flanges when in proper position relative to each other, and by afterwards turning over the edge on to the seam, thus making it water-tight. The location of mouldings between joints in cornices is determined very much by the dimensions of the cornice and by the design. Sometimes the planceer and bed- moulding are formed in one piece, and occasionally they are separate. A better job is ordinarily made of fastening the bed-moulding to the brackets, and of completing the inside miter of the bracket-mouldings when the bed moulding is handled detached. Th« joint between the plan- ceer and crown-moulding is ordinarily formed in the drip— a downward projecting edge being turned on the inside of the drip-member attached to the crown-moulding. The following cut shows a slightly difi'erent profile, constructed for a building without a gut- ter, but with the same general arrangement of parts and joints. i A JOINT. ^ \Lomoutj, No. 988. The general order of proceeding in putting up is as follows : The foot-moulding is first set, by means of lookouts, and a board which is nailed to the top of them. The brick work may then be carried up to the top of the lookouts so as to hold this course firmly in position. If the frieze is to be brick, the brick work may be carried higher — say half way to the top of the brackets. The object of a board in connection with the lookouts in a foot- moulding is to secure a firm and even foundation upon which to rest the brackets, which cannot be obtained unless there is some adequate bracing in the foot-moulding. After the foot-moulding has been set as above described, the brackets are next placed in proper position, by nailing on to the board in the foot-moulding, through flanges whicli are provided at the bottom of each, or by any other convenient method. If the cornice has frieze pieces, they are next set, being slipped down behind the brackets and joined to them by clinching the edges provided for the purpose. The brick work is next carried up to the top of the frieze, and the straps or wires for holding brackets are carried back through the wall and f astened. In the case of a brick-frieze, the brack- ets are sometimes fastened by running a wooden block into them and nailing through their sides. This block is extended back into wall and takes the place ®f a brick. It is sometimes called a THE KITTREDGE CORXICE AXD ORXAME^^T COMPANY. 373 wooden brick. After the brackets are set and the brick work is carried up as high as the top of the frieze, the various bed-mouldings are put ouj being fastened to the brackets by seaming, clinching, or riveting, as the nature of the forms may admit. In the case of a modillion-course or dentil-course, the modillions or dentils are always attached to the mouldings before the mouldings are placed .in position. Dentils and modillions are attached by riveting, seaming or clinching, and soldering. The neatest job is made by clinching, as in that case there are no out- side flanges to be left exposed. The planceer is laid directly upon the brackets and modillions, and is fastened to them by cutting through and clinching. After the brick work has been car- ried as high as the planceer, the lookouts supporting the gutter, or the roof, as the case may be, are run out. The planceer is attached to them either by nailing direct, or by lugs riveted to the planceer and nailed to the sides of the lookouts. The latter plan, although costing a little more, is preferable in all cases. After the lookouts have been set and the planceer attached to them, the crown-moulding is put on by hooking against the drip-edge of the planceer and drawing back against the face of the lookouts, to which it is attached by either nailing direct or nailing through riveted lugs, as described in connection with the planceer. A supplementary lookout is extended into the modillion-course whenever the projection and size of the mouldings admit of it. No, 984. Trusses and stop-blocks are constructed with flanges to the profile of the mouldings of the cornice. These flanges are thoroughly riveted and soldered in position. They project only about two inches, and are intended to slip inside of the mouldings, which are to be riveted to them. Joints between lengths of mouldings are made by lapping and riveting. Carefully worked mouldings can be joined in this way so neatly as to hide all indications of a seam when finished and viewed from a short distance. The necessity of carefully prepared wood work, correct as to size and shape, and set to line, is apparent. No matter how thoroughly a cornice may be made, if the supports upon which it is fastened are out of position or irregular, the symmetry of the structure is lost. Too great care cannot be exercised in guarding this point. The general manner of attaching or putting up a cornice as above described, progressing as the brick work goes up, and with flanges extending into the wall at each step, constitutes the 374 THE KITTREDGE CORNICE AIS'D ORN"AMENT COMPANY. cornice a permanent part of the building, and is the manner calculated to give the best satisfac- tion. It frequently happens, however, that it is desirable to put cornices upon buildings whose brick work is already completed. The method of procedure in such a case is to attach lookouts by means of digging into the wall, or by nailing into plugs driven between the bricks. The flanges of the moulding are all turned so as to lay against the face of the wall, instead of run- ning into it. By careful workmanship a satisfactory job can be made in this way. It should never be used, however, save where it is impossible to do better. There is no part of cornice-work, as ordinarily termed, wherein good workmanship is more urgently required than in putting up; and we might also add, there is no part which is more generally neglected, or trusted to inferior or incompetent workmen. As ordinarily constructed, the putting up of a galvanized-iron cornice is so simple a matter that it should have all the atten- tion and care it requires, that the credit of the business may be maintained. STRICTLY PIRE-PBOOF OOITSTRUCTIOIT OF SHBET-MIBTAL CORNICES. While a galvanized-iron cornice, as ordinarily constructed and put up on wood lookouts, will resist fire for a long time, and is no doubt far preferable to a wood cornice, a strictly fire-proof cornice is only obtained by the use of metals for supports and fastenings, to the entire exclusion of wood. As to general principles of construction, joints, connections, fastenings, &c., there is very little to be said of special application. There is a little change from the general methods indicated in our description of the construction upon wood lookouts. Instead of carrying in parts on to the building, a method employed by some mechanics is to build the cornice in sections upon the ground and hoist to the top of the wall in that shape. While this plan works well in many cases and under some circumstances, we believe from observation that it is not entirely sat- isfactory. We recommend in all cases the building in of gaivanized-iron work. In the case of fire-proof construction we advise a similar plan as described under the preceding heading. In this case an outside scaffold will be required, but we are certain that the superior quality of work obtained thereby will more than compensate the extra expense. Bar-iron supports and braces are used, formed to the general contour of the parts. The mouldings are run through solid be- hind all brackets and modillions. Brackets and modillions are attached by means of riveting through outside flange. Mouldings are fastened to the braces and supports by means of button- headed bolts. Anchors or ties are extended through the wall with an end bent down for a fast- ening. A glance at the annexed cut shows the general arrangement of parts, and also indicates a superior method of constructing a gutter — a matter to which we also desire to call attention. No. 985. The pitch of the gutter is provided by variations in the bend of the brace supporting the back. By attaching it higher up, upon the front brace, it will readily be seen the bottom of the THE KITTEEDGE COEIs'ICE AND ORN"AMEXT COMPANY. 375 gutter will be correspondingly raised. Sometimes th^. front brace is constructed -with a slot, sometimes with a series of holes, and sometimes each set of braces is worked to a pattern and posi- tive joints and fits made. The latter plan is calculated to give the best satisfaction. The outer edge of the gutter and the upper flange of the crown-moulding are seamed together over a T iron or L (angle) iron, which abo serves to keep the outer edge of the cornice and gutter in shape and straight. A heavy, common iron lining is provided throughout the gutter for supporting the tin, which is attached to the braces by cutting and bending narrow flanges around them. The tin is shaped to the general form of the gutter, and depends for fastening upon its connection at the outer edge with the crown-moulding, and upon the roof flange. Besides the construction herein indicated, very frequently cast iron lookouts to pattern are employed, in which case the pitch of the gutter is allowed by strips attached to the lookout, or by the construction of the roof as a whole. Sheet-metal cornices constructed upon iron supports are susceptible of equally good work- manship and finish as those put up on wood. Greater care probably is required in making fit- tings and joints, but there is no reason why equally good results are not attainable. No. 986. DiAGKAM or THE KiTTREDGE CORNICE AND ORNAMENT COMPANT'S Improved Construction for Light Bar Iron Work in Fire-Proof Cornices. (Patented 1876.) The methods of putting up and the condition in which work is shipped will be better under- stood by careful perusal of the description of construction drawings, to be found in another place. Careful attention paid to the wants and preferences of mechanics as to the construction of work. While recommending plans as described herein, this company is prepared to get up work upon any other plan, for whatsoever reason preferred. Its mission is to build work "for the trade" as the trade wants it. 376 THE KITTREDGE CORNICE Ai^'D ORKAMENT COMPA^^^T. EXPENSE OF PUTTING UP. The cost of putting up cornices made by the Kittridge Cornice and Ornament Company is twenty-five per cent, less than that involved upon same designs manufactured by others. This is not a mere estimate, but a fact testified to by hundreds of customers to whom we have sold work during the past four years. The reasons are oDvious and can be briefly stated. The work manufactured by us is carefully designed, accurately cut, formed by machinery, and joined by skilled labor. Each step is well and thoroughly performed. It is thoroughly protected in ship- ment. Every job is carefully calculated and is accompanied with a full set of construction-draw- ings, as herein illustrated. At the building there is no fitting to be done. Repairs are at a mini- mum, because the work is protected in shipping. There is no calculating to be done, because the pieces are all marked, both upon the work and upon the plans, the calculating having already been done at the factory. Any intelligent mechanic will appreciate the advantages here off'ered. We are frequently asked for a rule for estimating actual cost of handling and putting up or- dinary designs of cornices. We can find no better rule than that of actual experience. A per- centage of the selling price is seldom satisfactory, on account of sundry incidental items which will vary according to the size and location of work to be done. A careful handling of one aver- age job, keeping a careful account of expenses under the various heads, will almost always be sufficient to enable a mechanic to satisfactorily estimate on all ordinary work. THE KITTREDGE CORXICE Ai^D ORNAMENT COMPANY. 377 CONSTRUCTION DRAWINGS. This term, by common consent, refers to those plans and drawings sent with a shipment of work, by which to put it upon the building. They ordinarily consist of an elevation of the whole or some part of the cornice (see accompanying cut), a plan of the building and cornice, with a figured and lettered diagram of the different mouldings drawn outside of same (also see cut) and full size profile sections of the cornice, showing wood-work, joints, etc. The latter is com- monly termed the look-out patterns. We present on the next three pages a full set of construction drawings, corresponding in all respects, save size and scale, with what is usually sent with work from this establishment. A careful examination of the same will show how completely all necessary calculations are made for the work before it leaves the factory, and how simple a matter it is for a workman to put up a job. A brief description of the annexed cuts will perhaps make this plainer. Referring first to the plan of the cornice and diagram of mouldings projected around the same, it will be noticed that the location of every particular piece of work is indicated thereon to a certainty. The brackets and modillions are represented by the small parallelograms marked respectively B C and C C. A glance at the elevation shows the same letters on the face of the brackets and mo- dillions thereto, thus identifying the parts to a certainty. The frieze pieces are represented by the lines just inside the wall, B K, B B, B 0,B S, etc., which also can be identified by a glance at the elevation. The frieze pieces can be further identified by their lengths, the figures being also shown on the plan. In the diagram of mouldings, each line represents a joint. Thus the parallel lines extending around the building represent the horizontal joints between mould- ings, while the cross lines represent joints between lengths of mouldings. Each space between lines indicates a complete part as shipped from the factory. To further identify the various mouldings the name of each is written in the space representing it. Thus the inside space in the diagram here given represents the foot-moulding. The second space represents the bed-mould- ing and modillion-course. The third space represents the planceer, and the outside space repre- sents the crown-moulding. With the Kittredge Cornice and Ornament Co. it is customary to pre- serve a record of all profiles of mouldings, (usually termed stays.) To this end all such parts are numbered. As an additional advantage contributed to the construction drawings, their numbers are given in connection with the various mouldings, both in the plan, as will be seen in connection with the names of the mouldings just enumerated, and in the lookout drawings, as will be seen by reference to that cut. By this means, should it be desirable to order additional pieces for any reason whatever, the method of expressing the order is at once clear and unmistakable. It is simply so many pieces or feet, as the case may be, of Stay 588 or Stay 4,503, etc. A certain number of standard and often recurring forms have been catalogued as given in this book. All new profiles, of whatever nature, are given numbers at the time they are drawn. Thus no number can represent more than one profile. In ordering, therefore, it is not necessary to name the order or job. The stay number is sufficient identification. THE KITTEEDGE CORKICE AND ORIs-AMEKT COMPAKY, , 1 r 1 ^ s r 1 ■ % ZM2 BED e-MOP CO UHSC 3T/Ar ^:r^.?-» 5"! 'j' . CHIM PCD PLANC EEK E,T fi^Y 4 6 6 Z-^Sj ^o'\ 3 / ' O" I OH OWM -M OUU U STAY 6'»e.go| B' 0" \ / 9 O PLAN OF CORNICE WITH DIAGRAM OF MOULDINGS, ETC.— Scale >^ Inch = 1 foot. 380 THE KITTRKDGE CORNICE AXD ORNAMENT COMPANY. LOOKOUT PATTERNS. For Design No. 951 and corresponding Plan. Scale, l}i inches = 1 foot. Eeferring again to the plan of cornice and diagram of mouldings, the method pursued of in- dicating the position of miters is at once clear and easy of comprehension. The various angles of the building are numbered 1, 2, 3, etc., as will be seen by reference to the cut. Each miter re- ceives a structure letter as will be seen by referring to either angle of the building shown on the plan. At No. 1, for example, the miter in the crown-moulding is lettered A, the planceer miter THE KITTREDGE CORI^ICE AND ORITAMENT COMPANY. 381 O, the bed-mould and modillion-course miter A E, and the foot-mould miter A F. Miters at other angles receive different letters. When the work arrives at the building, and the question of distribution and loc tion arises, a reference to the plan shows that crown-moulding miter A belongs at angle No. 1, B at No. 2, C at No. 3, etc. Besides this, the additional precaution is taken of marking the length of each arm of the miter on the plan. In the example we have chosen by which to illustrate the system of construction drawings, it is supposed that on the rear of the building the cornice is constructed with a brick frieze This necessitates a slight modification of construction, as far as joints and flanges are concerned. It will be observed, by reference to the plan, that in the bed-moulding and modillion-course, which in this case are joined, and are therefore represented by one stay, stay No. 45G3 is used on the front of the building, while stay No. 45G7 is used on the rear. The slight difference in these profiles, which may be seen by reference to the cut of the look-out patterns, the broken diagram to the left indicating the profiles used on the rear, is enough to demand different stay numbers. It is evident one profile could not be used in the place of the other. The same difference may be observed in the two stays employed in the foot moulding by comparing stays 588 and 590. Before shipping from the factory, all parts of a job are marked with a stencil, in plain let- ters, and figures corresponding to the marks on the plan as herein described. The mouldings are named, and receive also the stay numbers. Each bracket, modillion, frieze-piece, miter, and other similar parts, receive the structure letter as shown on the plan. By means of the diagram of mouldings and parts in connection with the plan of building, it is easy for a mechanic to examine the work before commencing to put up, and by checking the different items, ascertain to his satisfaction that all is correct. Construction drawings for cornices upon wrought-iron construction, differ from those above described only in so much as the difference in the material employed demands. When look-outs of wrought-iron contain the gutter, each one is numbered, and corresponding numbers are shown upon the plan, thus indicating the exact position of each look-out. The object in furnishing construction-drawings is to render the outside mechanics, whether of more or less experience, entirely intelligent as to the methods and means of fastening. To do this, frequently requires written directions, in addition to the drawings. Very careful attention is paid to this matter in all cases, and from the results already attained, we are satisfied that our work, put up with the aid of our construction-drawings, will cost twenty-five per cent, less than handled in the old way. As explained in another place, drawings for joining cut and formed work are also sent with work shipped in that condition, additional to the ones described herein. For construction drawings, both for putting work together, and by which to put work on the building, an arbitrary charge, proportionate to the cost, is made, for the same general reasons as explained under the head of patterns. As there is no more expense, comparatively speaking, attending construction drawings for a large than for a small building, the charge for the same cannot be included in the per foot or per piece price of the work. We make these charges as reasonable as possible, when the amount of responsibility and the actual service rendered are considered. We have no desire for profit on these items, but we must protect ourselves from loss. Inasmuch as our reputation and that of our customers is dependent very much upon the quality of the workmanship in putting up, and as construction- drawings are great assistance thereto, we insist upon sending a set of construction-drawings with each order. Where work is ordered without construction drawings, orders will be declined, unless the necessity of making such drawings is obviated by the customer sending in his order completely analyzed. By the latter we mean ordering his work in parts, so many feet or pieces of each kind of moulding, so many miters with arms of such and such length, so many brackets, modillions and dentils, so many trusses or stop-blocks of such and such a construction, etc. A customer will readily per- ceive the amout of accuracy and calculation required before he can give his order in this manner. He will find that an equivalent of our drawings is necessary. Hence when we receive such an order correctly given we have no hesitation in omitting such work as is accordingly unnecessary to be performed. 382 THE KITTREDGE CORisICE AXD ORXAMEJs'T COMPAXY. EXTRAS. In all sheet-metal work made to order, (and all cornice-work, window-caps, etc., are of ne- cessity made to order, whether it be to catalogue designs or to architect's special designs,) before being made certain preliminary steps are necessaryo Drawings of the parts must be made. Schedules of quantities must be prepared. Patterns must be worked out. Further than this, during the progress of a job through the shop certain adjustments of machinery are necessary. All this must be done on each individual order, whether the lot be one of twenty feet or of two hundred feet. Hence an adequate allowance in the price per foot or per piece is impossible. This gives rise to the charge made for patterns, as mentioned from time to time in this book. This charge is the same in all cases upon any one article irrespective of the quantity. An arbitrary charge is made for each miter in a cornice or moulding, — a plan made necessary by the irregularity of their occurrence. With CUT AND FORMED work a special drawing is always required by which to put the work together. For this an arbitrary price must be made, and this is also always the same upon any given article whether the quantity be large or small. With all work upon which we calculate quantities, locate joints and determine, drawings must be sent by which to put up the work. These drawings are known under the general name of CONSTRUCTION DRAWINGS and are fully described in another place. For such drawings, as in all the above mentioned cases, no satisfactory allowance can be made in the prices of work by the foot or by the piece, therefore they are charged for in separate and distinct items. Crating or Boxing, as the case may be, and cartage to the depot, are charged at the actual cost to us. With the exception of the items here enumerated there are no extras in ordinary cornice- work as sold by the Kittredge Cornice and Ornament Company. THE KITTREDGE CORNICE AND ORNAMEXT CO-UPAXY. 383 FOR THE ARCHITECT. An exhaustive Catalogue of Galvanized-Iron Cornice is an impossibility. The designs here presented are intended more as suggestions and examples of prices, etc., than as specimens of the finest styles. We purposely confine our illustrations to the plainest of designs. Should we pre- sent a catalogue of elaborate and finished work, the care and judgment requisite for judicious selection therefrom would preclude the possibility of its use by any save architects. We have no desire to interfere with the professional duties of architects, or tempt builders to dispense with their services. We choose rather to hold ourselves alwaj s in readiness to execute their designs, realizing full well the importance in all building enterprises of having an expert engineer to manage the several departments, and bring the work of difierent mechanics together in one harmonious whole. Galvanized-iron cornices have heretofore, in a great measure, been duplications of the de- signs commonly employed in wood, which in turn, with minor modifications, were imitations of stone. With the marked advancement of this industry during the past few years, this need no longer be the case. A sheet-metal cornice is not now imitative. It possesses a variety and beauty peculiarly its own. Architects vie with each other in producing designs which shall utilize the especial adaptability of sheet-metal for the purpose to best advantage and efi"ect. No pattern is too complex or too difiicult. Designs are satisfactorily executed in sheet-metal which are impossible to produce in any other material. By the free and judicious application of pressed- zinc ornaments, work is made most nearly approaching carved work; but no material capable of being carved will stand working to the shapes so satisfactorily produced in sheet-metal. For boldness of figure, sharp and clean cut lines, sheet-metal work takes the lead of all competitors. We therefore content ourselves with this mention of the possibilities of sheet-metal work, assuring architects that in its employment they will find a material unequaled in the whole range of building, for use when special features of designs are wanted or peculiar ideas at- tempted, in whatever style of architecture. If in the following designs we familiarize the building public with the elements of cost of Galvanized-Iron Cornices, as applied to a small va- riety of examples, we shall have accomplished the principal end of this publication. Architects* special designs will be estimated and priced upon application. An accurate scale-drawing, accomparjied by full-size sections, should be sent us. Preliminary estimates for architects* private use made at any time, free of charge. We are always glad to afl"ord any in- formation in our power. Advice to architects as to construction and other technicalities at any time, free of charge. Correspondence solicited and promptly answered. 384 THE KITTKEDGE COENI<:^E AND OK^^^AMEKT COMPANY. FOR THE BUILDER. Much may be said to cornice-workers and tinners concerning the thorough and careful put- ting up of galvanized-iron cornices, but none of this relieves the carpenter or master-builder from his due share of the responsibility. Unless a tinner is provided with suitable wood-worlt against which to fasten, and with requisite scaffolding when scafiolding is required, he cannot make satisfactory work. If the lookouts are not true, the finished work will not be straight. Cornices cannot be put up in no time. An interval must be allowed between the time of commencing the cornice and the framing of the roof. We speak of this because sometimes cor- nice-workers are hurried in their work to the prejudice of the job when done. Nor should we be understood to say that putting up cornices is necessarily a slow job. Quite the contrary is the case. It is more rapid tlian almost any other part of the building, but it, as well as other matters, can be spoiled by undue haste. A builder by education is a constructor — is accustomed to straight lines, plumb surfaces, true angles, etc. A tinner's business develops a different set of qualifications, important in themselves, but to the exclusion of some of the very necessary ones in building. It follows that sometimes a carpenter makes a better job in putting up sheet-metal cornices than the tinner. The few soldered joints required upon the building are after all the smallest part of the putting up. We call attention to these facts only with a desire of removing every obstacle from the way of putting up Galvanized-iron work well, and in an efl'ort to facilitate the employment of one of the most useful of building auxiliaries. With every job sent out is a set of Construction Drawings (as described elsewhere,) which are of easy comprehension to practical builders, and careful attention to which will insure a good job on completion. THE KITTREDGE CORKICE AND ORXAMEXT COMPANY. 385 PATENT CRIMPED IRON. By Crimped Iron, as mentioned in this Catalogue, and in our various circulars, is ^^|^n'tV iron FREED FROM BUCKLE, by means of ribbed or roughened rollers, which impart to it the a^f-^ pearance of being slightly corrugated. Crimped iron, however, differs from corrugated iron in that sheets in the former, after treatment, are quite as long as before the process, while a corru- o-ation imparted to a sheet shortens it. Various methods have been tried by which to overcome the buckle inherent to a greater or less extent to all sheet-iron, but none of them have been suc- cessful, save the patented process above mentioned. By this plan a light sheet of iron is made to lay entirely smooth and flat. A certain stiffness and stability is imparted to it. The applicabili- ty of crimped iron to friezes, planceers, and all plain surfaces, therefore, is at once apparent. 38G I THE KITTREDGE CORiflCE AKD OE^TAMENT COMPANY. Numbers 27 and 26, when crimped, become as strong and unyielding as JS'umbers 22 and 20, not crimped, while the use of the former is not attended with the numerous difficulties pertaining to the latter. Crimped iron further possesses the marked advantages of resisting the effects of con- traction and expansion, and of affording a surface of a nature to break and distribute rays of light, thus overcoming the glaring metallic surface ordinarily presented by sheet-iron work. Crimped iron affords abetter surface for the reception of paint. All these advantages are main- tained with no corresponding disadvantages. The lines of ridges and depressions are so slight, that at a little distance they are almost entirely lost to the sight. They are so slight that bends, where necessary, may be jaade across a sheet after treatment As incorporated into the work of the Kittredge Cornice and Ornament Co., crimped iron is sold at the same price as plain iron. | Crimped iron is used in all plain surfaces, for all planceers, friezes, etc., in all the work manu- factured by the Kittredge Cornice and Ornament Co. The superiority of work thus constructed as compared with that of the old plan, is at once apparent. ^sTo extra charge is made for the use of crimped iron in our work, as above mentioned. Crimped iron is also sold to the trade in the sheet or by the bundle at fair rates, determined by the state of the market and the quantity ordered. Architects will at once see the propriety and advantage of specifying the use of crimped iron in all their work. The Kittredge Cornice and Ornament Co. are the sole manufacturers of crimped iron, for the trade, under W. E. Worthen's patent. While offering the same upon liberal terms to all cor- nice manufacturers, notice is hereby given that all infringements will be dealt with according to law. All work priced in this book, of a nature to which crimped iron is applicable, is constructed of crimped iron whether specifically so mentioned or not. THE KITTKEDGE CORNICE AKD ORNAMENT COMPANY. 387 CATALOGUE MOULDINGS. A certain number of profiles of the various mouldings in use, by their frequent recurrence justify patterns kept on hand. Some of them, in fact, may be carried in stock advantageously. On the following pages are presented some 250 different profiles, with dimensions, girts, and prices for the different gauges. It will be observed that the various directions in which flanges are turned, by which to make joints or connections, constitute the larger portion of the varia- tions given. On mouldings ordered from Catalogue stays, there is no extra charge for patterns. It will be seen, therefore, that there is a saving in cost by using the designs here given. Experience has demonstrated that the patterns presented can be combined in such ways as to satisfactorily answer almost any required purpose. To avoid the charge for construction drawings and pat- terns, orders must be sent in detail. We undertake to supply the exact kind and quantity or- dered, and then our responsibility ends. The prices here given are for mouldings in eight foot lengths. N'o extra charge will be made for occasional short lengths to make out quantities, but large lots of short lengths are subject to special rates. A miter as priced in the following lists consists of two pieces, ready to join, or the pieces joined, as the case may be. Where but one cut is made, as when butting one moulding into another, there is but a half miter to be charged for. Any required stay or profile made to order. A full formula for estimating Galvanized-iron mouldings is to be found in another part of the Compendium. (See Index.) Mouldings made out of Crimped iron subject to special prices. The following table gives the extras on all mouldings made to order to special stays or pro- files. PRICE LIST OF EXTRAS ON SPECIAL PROFILES OF SHEET-METAL MOULDINGS. No extras on "Catalogue Stays," as above described. Girt | Sin. & 6 in. 7 in. & 8ia. 9 in. & lOin. 11 in. & 14 in. 13 in. & 14 is. 15 in. 16 in. 17 in. & 18 in. 19 in. & 20 in. 21 in. & 22 in. 23 In. & 24 in. 25 in. 26 in. 27 in. 28 in. 29 iz. & 30 in. Patterns— per Stay .30 .30 .30 .40 .40 .40 .50 .50 .50 .GO .60 .60 .70 .70 .70 .70 Cutting each Miter .03 .04 .05 .06 .07 .08 .08 .09 .10 .12 .14 .16 .16 .18 .18 .20 Joining each Miter .12 .15 .20 .25 .30 .30 .30 .35 .40 .45 .50 .55 .55 .55 .60 .60 Complete Miters— each .1.5 .19 .25 ..31 .37 .38 .38 .44 .50 .57 .64 .71 .71 .73 .78 .80 388 THE KITTRED&E COEiq-ICE AND ORNAMENT COMPANY. GALVANIZED IRON RIDGING. No Extra Charge on any of the Patterns here Presented. RIDGING IS SHIPPED IN EIGHT-FOOT LENGTHS. Scale of Cuts : 1 incli == 1 foot. Galvanized nails, for putting on Ridging, always on hand, and sold at low prices. A No. 327. wf^?h*^^^ f inches. Width of Apron 23I inches. 8 inches. Gauge No. 27 15 per foot. go- 26 16 per foot. No. 24 17 per foot. A No. 326. wSb'.^I^^" 2 inches. Width of Apron 23^ inches. ^^'^ 10 inches. Gauge No. 27 No. 26 " No. 24 .18 per foot. . 19 per foot. .20 per foot. THE KITTREDGE CORNICE AXD ORNAME^q"T COMPANY. 389. Scale of Cuts : 1 inch = 1 foot. No, 756. Diameter of Roll 1}4 inches. Width of Apron 1% inches. Girt 8 inches. Gauge No. 27 15 per foot. " No. 26 16 per foot. " No. 24 17 per foot. A No. 757. Diameter of Roll 2 inches. Width of Apron 2% inches. Girt 10 inches. Gauge No. 27 18 per foot. " No. 26 19 per foot. " No. 24 20 per foot. No. 325. Diameter of Roll 23^ inches. Width of Apron 2^ inches. Girt 12 inches. Gauge No. 27 21 per foot. " No. 26 22 per foot. " No. 24 23 per foot. No. 321. Diameter of Roll 3 inches. I Gauge No. 27 Width of Apron 3^ inches. " No. 26 Girt 15 inches. " No. 24 .25 per foot. .27 per foot. .28 per foot. 390 THE KITTIiEDGE COKNICE AND ORi^'AMENT COMPANY. Scale of Cuts : 1 inc^ = 1 foot. No. 323. Diameter of Koll inches. Width of Apron '. 4% inches. Girt 18 inches. Gauge No. 27 30 per foot. " No. 26 31 per foot. " No. 24 33 per foot. THE KITTREDGE CORJ^ICE AND ORN'AMEN'T COMPANY. 391 GALVANIZED IRON GUTTERS. No Extra Charge for Patterns on any of the Styles here Presented. ALL GUTTERS SHIPPED I2s" EIGHT-FOOT LENGTHS. BEADS MAY BE EITHER ^ INCH, 1 INCH, OR 1}{ INCHES IN DIAMETER. Scale of Cuts : 1 inch = 1 foot. Quarter Circle, 0= G. and Box Gutters Shipped without Koof Flange being Bent, when so ordered. It can be readily bent in process of putting up, so as to allow a pitch to the Gutter. Any Style of Gutter Hangers to Order. The Various Patent Hangers may be ordered of us at Manufacturers' Prices. No. 338. Depth Projection Girt....... 2)4 inches. 4i}l inches. 9 inches. Gauge No. 27 " No. 26 Cut and Formed Miters Complete Miters .16 per foot. .17 per foot. .05 each, .25 each. No. 330. Depth Projection Girt 2}^ inches. 4% inches. 10 inches. Cut and Formed Miters Complete Miters Gauge No. 27 " No. 26 .18 per foot. .19 per foot. .05 each. .25 each. 392 THE KITTREDGE CORN^ICE AXJ) 01I>^"AMEXT COMPANY. Scale of Cuts : 1 inch — = 1 foot. No. 331. Depth 3 inches. Gau2:e No. 27 21 per foot. Projection 6 inches. No. 26 22perfoot. Girt 12 inches. Cut and Formed Miters 06 each. I Complete Miters 31 each. No. 333. Depth : 4 inches. Projection 7 inches. Girt 15 inches. Gauge No. 27 25 per foot. No. 26 27 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. M No. 336. Depth inches, j Gauge No. 27 25 per foot. Projection 4% inches. No. 26 27 per foot. Girt 15 inches. I Cut and Formed Miters 08 each. I Complete Miters ; 38 each. No. 337. Depth 51^ inches. Projection 5% inches. Girt 18 inches. Gauge No. 27 29 per foot. " No. 26 .31 per foot. Cut and Formed Miters 09 each. Complete Miters 44 each. THE KITTREDGE COEKICE AI^D ORiq^AMEKT COMPANY. 393 Scale of Cuts : 1 inch = 1 foot. No. 753. Depth inches. I Gauge No. 27 24 per foot. Projection 3% inches. | " No. 26 25 per foot. Girt 14 inches. Cut and Formed Miters 07 each. I Complete Miters .37 each. \1 No. 753. Depth S% inches. Projection ■. 4^ inches. Girt 16 inches. Gauge No. 27 27 per foot. " No. 26 28 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. No. 754. Depth 43^ inches. I Gauge No. 27 29 per foot. Projection 5^ inches. | " No. 26 31 per foot. Girt 18 inches. I Cut and Formed Miters 09 each. I Complete Miters 44 each. Depth 5 inches. Projection 6 inches. Girt 30 inches. 55. Gauge No. 37 33 per foot. " No. 36..- 34 per foot. Cut and Formed Miters 10 each. Complete Miters 50 each. I 394 THE KITTREDGE COR]S"ICE AND ORKAMEKT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 331. Depth 3 inches. Proiection ^Vz inches. Girt 14 inches. Gauge No. 27 24 per foot. No. 26 25 per foot. Cut and Formed Miters 07 each. Complete Miters 37 each. vr No. 322. Depth 4 inches. Projection 6 inches. Girt 17 inches. Gauge No. 27 28 per foot. No. 26 30 per foot. Cut and Formed Miters 09 each. Complete Miters 44 each. VJ No. 340. Depth Projection. Girt 4X inches. 63^ inches. 80 inches. Gauge No. 27 32 per foot. No. 26 34 per foot. Cut and Formed Miters 10 each. Complete Miters 50 each. No. 341, Depth 5 inches. Projection 71^ inches. Girt 22 inches. Gauge No. 27 35 per foot. <^ No. 26 38 per foot. Cut and Formed Miters 12 each. Complete Miters 57 each. THE KITTREDGE CORKICE AJ^D ORI^"A:\rEiq-T COMPANY. 395 ^eale of Cuts : 1 inch = 1 foot. No. 339. Depth inches. Projection 3 inches. Girt . . 12 inches. Gauge No. 27 21 per foot. " No. 26 22 per foot. No. 24 23 per foot. Cut and Formed Miters 06 each. Complete Miters 31 each. No. 333. Depth 4X inches. Projection inches. Girt 15 inches. Cut and Formed Miters Gauge No. 27 25 per foot. " No. 26 27 per foot. No. 24 28 per foot. 08 each. Complete Miters 38 each. No. 334. Depth 53^ inches. Projection 5)^ inches. Girt 18 inches. Cut and Formed Miters , Complete Miters Gauge No. 27. No. 26. " No. 24. .09 each. .44 each. .29 per foot. .31 per foot. .33 per foot. No. 3.35. Depth 6^ inches. Projection 7 inches. Girt 20 inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. No. 24. .10 each. .50 each. .32 per foot. .34 per foot. .36 per foot. 396 THE KITTREDGE CORKICE AND ORI^AMEKT COMPAKY. Scale of Cuts : 1 inch 1 foot. No. 342. Depth 7 Projectiou 8 Girt 24 inches, inches, inches. Gauge No. 27 38 per foot. " No. 26 41 per foot. No. 24 43 per foot. Cut and Formed Miters 14 each Complete Miters 64 each. No. 343. Depth 7 inches. Projection 10 inches. Girt 28 inches. Cut and Formed Miters Gauge No. 27 44 per foot. No. 26 47 per foot. " No. 24 56 per foot. 18 each. Complete Miters 78 each. THE KITTREDGE COEiflCE Al^D OKXAMENT COMPANY. 3<)7 GALVANIZED-IRON CROWN-MOULDINGS. No Extra Charge for Patterns on any of the Styles Here Presented. CROWN-MOULDINGS ARE SHIPPED IN EIGHT-FOOT LENGTHS. Scale of Cuts 1 inch one foot. No. 640. Height 6 inches. I Gauge No. 27 17 per foot. Projection Scinches. No. 26 18 per foot. Girt 10 inches. | No. 24 19 per foot. Cut and Formed Miters 05 each. Complete Miters 25 each. No. 641. Height 73^ inches. Projection 3% inches. Girt 12 inches. Gauge No. 27 20 per foot. " No. 26 21 per foot. No. 24 22 per foot. Cut and Formed Miters 06 each. Complete Miters 31 each. 398 THE KITTREDGE CORKICE AND ORNAMENT COMPANY. Scale of Cuts : inch 1 foot. No. 642. Height 9>^ inches. Projection Scinches. Girt 15 inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. " No. 24. each. ! each. .24 per foot. .26 per foot. .27 per foot. No. 643. Height llj^ inches. Projection 6}{ inches. Girt 18 inches. Cut and Formed Miters Gauge No. 27 28 per foot. " No. 26 30 per foot. " No. 24 32 per foot. , 09 each. Complete Miters 44 each. No. 644. Height 13 inches. Projection 6% inches. Girt 20 inches. Gauge No. 27 .31 per foot. " No. 26 33 per foot. No. 24 35 per foot. Cut and Formed Miters 10 each. Complete Miters 50 each. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 399 Scale of Cuts : 1 inch =- 1 foot. \ No. G37. Height , 6X inches. | Gauge No. 27 18 per foot. Projection 3% inches. I " No. 26 .19 per foot. Girt 11 inches. | " No. 24 20 per foot. Cut and Formed Miters 06 each. Complete Miters 31 each. No. 628. Height 8X inches. Projection 5>| inches. Girt 14 inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. " No. 24. each, each. .23 per foot. .24 per foot. .25 per foot. No. 629. Height 10 Projection 6 Girt 16 Cut and Formed Miters Complete Miters inches, inches, inches. Gauge No. 27. " No. 26, " No. 24. .08 each. .38 each. .25 per foot. .27 per foot. .29 per foot. 400 THE KITTKEDGE CORN^ICE AKD OEIS'AMENT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 630. Height 12 inches. Projection 7 inches. Girt 19 inches. Cut and Formed Miters. Gauge No. 27 30 per foot. No. 26 32 per foot. " No. 24 34 per foot. 10 each. Complete Miters 50 each. No, 645. Height inches. I Gauge No. 27 24 per foot. Projection 4)^ inches. | *' No. 26 26 per foot. Girt 15 inches. I ** No. 24 27 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. No. 646. 28 per foot. 30 per foot. 32 per foot. .09 each, .44 each. Height 9% inches. I Gauge No. 27 Projection 5>| inches. " No. 26, Girt 18 inches. | No. 24 Cut and Formed Miters Complete Miters ...<,.» THE KITTREDGE CORJy^ICE AND OR^^AMEN-T COMPAl^Y. 401 Scale of Cuts : 1 inch -= 1 foot. No. 647. Height 10% inches. Projection 5^ inches. Girt 20 inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. " No. 24. .10 each. .50 each. .31 per foot. .33 per foot. .35 per foot. No. 635. Height 6 inches. Projection 3% inches. Girt 11 inches. Cut and Formed Miters Gauge No. 27 18 per foot. " No. 26 19 per foot. " No. 24 20 per foot. 06 each. Complete Miters 31 each. No. 636. Height 7}i inches. Projection 3^ inches. Girt 13 inches. Cut and Formed Miters, Gauge No, 27 21 per foot. " No, 26 23 per foot. " No, 24 : 24 per foot. .07 each. Complete Miters 37 each. 402 THE KITTKEDGE CORNICE AKD ORKAMEKT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 637. Height 9% inches. Projection 5>^ inches. Girt 16 inches. Gauge No. 27 25 per foot. " No. 26 27 per foot. No. 24 29 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. No. 688. Height 113^8 inches. Projection 63^ inches. Girt 19 inches. Cut and Formed Miters Gauge No. 27 80 per foot. " No. 26 32 per foot. No. 24 34 per foot. 10 each. Complete Miters 50 each. 639. Height 13 inches. Projection 6% inches. Girt 21 inches. Gauge No. 27 33 per foot. " No. 26 35 per foot. " No. 24 37 per foot. Cut and Formed Miters 12 each. Complete Miters 57 each. THE KITTEEDGE COEKICE AND ORKAMEKT COMPAJ^Y. 403 Scale of Cuts : 1 inch = 1 foot. No. 631. Height 6}4 inches. Projection 3% inches. Girt 12 inches. Cut and Formed Miters Gauge No. 27 .20 per foot. " No. 26 21 per foot. " No. 24.... 22 per foot. .06 each. Complete Miters 31 each. Height 83^ inches. Projection inches. Girt 15 inches. Gauge No. 27 24 per foot. " No. 26 26 per foot. No. 24 27 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. No. 633. Height 10 inches. Projection 6 inches. Girt 17 inches. Cut and Formed Miters . Gauge No. 27 27 per foot. " No. 26 29 per foot. No. 24 31 per foot. , 09 each. Complete Miters 44 each. 404 THE KITTREDGE COR^^ICE Ai^D ORN^AMENT COMPAJ^^Y. Scale of Cuts : 1 inch 1 foot. No. 634. Height 12 Projection 7 Girt 20 Cut and Formed Miters . . . Complete Miters inches, inches, inches. Gauge No. 27 " No. 26 " No. 24 . 10 each. .50 each. .31 per foot. .33 per foot. .35 per foot. No, 648. Height 8}{ inches. Projection 4^^ inches. Girt 16 inches. Gauge No. 27 25 per foot. " No. 26 27 per foot. No. 24 , 29 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. No. 649. Height 9% inches. Projection 5}i inches. Girt 19 inches. Gauge No. 27 30 per foot. " No. 26 32 per foot. No. 24 34 per foot. Cut and Formed Miters 10 each. Complete Miters 50 each. THE KITTREDGE CORKICE A^D OEiTAMEIifT COMPAisY. Scale of Cuts : 1 inch = 1 foot. No. 650. Height.... Projection, Girt lOX inches. 5% inches. 21 inches. Cut and Formed Miters, Complete Miters Gauge No. 27. " No. 26. " No. 2-t. .12 each. .57 each. .33 per foot. .35 per foot. .37 per foot. No. 651— Adapted to receive Enrichment No. 1020. Height lOX inches. Projection 6^^ inches. Girt 17 inches. Cut and Formed Miters , Gauge No. 27 27 per foot. No. 26 29 per foot. No. 24 31 per foot. 09 each. Complete Miters 44 each. No. 652 — Adapted to receive Enrichment No. 1044^. Height 113^ inches. Projection 5% inches. Girt 18 inches. Cut and Formed Miters Gauge No. 27 28 per foot. " No. 26 30 per foot. " No. 24 32 per foot. 09 each. Complete Miters 44 each. 40G THE KITTREDGE CORKICE AKD OEl^AMENT COMPAI^Y. Scale of Cuts 1 inch = one foot. DIAGRAM ILLUSTRATING THE USE OF SUCH STATS AS NOS. 651 AND 652. Design No. 758, Being Enrichment No. 1044 upon Stat No. 653. THE KITTREDGE COEI^^ICE AND ORKAMEJ^^T COMPANY. 407 GALVANIZED-IRON BED-MOULDINGS, No Extra Charge for Patterns on any of the Styles here Presented. BED-MOULDINGS ARE SHIPPED IN EIGHT-FOOT LENGTHS. Scale of Cuts : 1 incli = 1 foot. No. 495. Gauge No. 27 08 per foot. " No. 26 09 per foot. Height IK inches. Projection 1% inches. Girt B% inches. Cut and Formed Miters 03 each. Complete Miters 15 each. No. 504. Height 23^ inches. I Gauge No. 27 09 per foot. Projection 2^ inches. | " No. 26. . • 10 per foot. Girt 4% inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. * No. 513. Height 2^ inches, j Gauge No. 27 09 per foot. Projection 2% inches. No. 26 10 per foot. Girt 4% inches. ! Cut and Formed Miters 03 each. Complete Miters 15 each. 408 THE KITTREDGE CORKICE AND ORNAMENT COMPANY. Scale of Cuts : inch 1 foot. No. 496. Gauge No. 27 09 per foot. No. 26 10 per foot. Height 1% inches. Projection 1^ inches. Girt 4%;inches. Cut and Formed Miters 03 each. Complete Miters 15 each. No. 505. Height 23^ inches. I Gauge No. 27 12 per foot. Projection 23^ inches. " No. 26 13 per foot. Girt 6% inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. No. 514. Height 2^ inches. Projection 2^ inches. Girt 6% inches. Cut and Formed Miters , Gauge No. 27 12 per foot. " No. 26 13 per foot. 04 each. Complete Miters 19 each. No. 498. Gauge No. 27 09 per foot. " No. 26 10 per foot. Height 1% inches. Projection 1^ inches. Girt 4% inches. Cut and Formed Miters ' 03 each. Complete Miters 15 each. THE KITTEEDGE CORNICE AND ORKAMENT COMPANY. 400 Scale of Cuts : 1 inch 1 foot. No. 507. Gauge No. 27 12 per foot. " No. 26 13 per foot. Height 23^ inches. Projection 231" inches. Girt 6% inches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 516. Height 2^ inches. I Gauge No. 27.. 12 per foot. Projection 2% inches. | " No. 26 13 per foot. Girt 6^ inches, j Cut and Formed Miters 04 each. Complete Miters 19 each. No. 499. Height 1%^ inches. Projection 1^ inches. Girt 4^ inches. Cut and Formed Miters Gauge No. 27 09 per foot. " No. 26 10 per foot. 03 each. Complete Miters 15 each. No. 508. Height 2)^ inches. I Gauge No. 27 .10 per foot. Projection 2i|' inches. | " No. 26 lloerfoot. Girt 5£ inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. 410 THE KITTREDGE COR]S"ICE AN^D ORKAMEKT COMPAIS'Y. Scale of Cuts : 1 inch 1 foot. I. No. 517. Height ' 2^ it)ches. I Gauge No. 27 12 per foot. Profection 2^ ii^ches. | No. 26 13 per foot. Girt 6X inches. | Cut and Formed Miters 04 each. Complete Miiers 19 each. No. 503. Height 1^ inches. Gauge No. 27 08 per foot. Projection 1^ inches. No. 26 09 per foot. Girt S% inches. Cut and Formed Miters 03 each. Complete Miters 15 each. No. 512. Height 23^ inches. Projection 23^' inches. Girt 4% inches. Cut and Formed Miters Gauge No. 27. " No. 26. .09 per foot. .10 per foot. 03 each. Complete Miters. , 15 each. No. 502. Height 1% inches. Projection 1% inches. Girt .... 4i| inches. Cut and Formed Miters Gauge No. 27 09 per foot. " No. 26 10 per foot. 03 each. Complete Miters 15 each. THE KITTREDGE CORNICE Al^'D ORNAMEiq^T COMPAI^Y. 411 Scale of Cuts : 1 inch = 1 foot. No. 511. Gauge No. 27 10 per foot. " No. 26 11 per foot. Height 2)^ inches. Projection 23| inches. Girt 5% inches. Cut and Formed Miters 03 each. Complete Miters 15 each. No. 520. Height 2^ inches. Projection 2% inches. Girt 6)1 inches. Cut and Formed Miters Complete Miters Gauge No. 27. No. 26. .12 per foot. .13 per foot. .03 each. .15 each. No. 500. Height 1^ inches. Projection , 1% inches. Girt inches. Cut and Formed Miters Complete Miters , . . . Gauge No. 27. No. 26. .09 per foot. .10 per foot. .03 each. .15 each. No. 509. Height 2}{ inches. I Projection 2^^ inches. \ Girt Scinches. | Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. .10 per foot. .11 per foot. .03 each. .15 each. 412 THE KITTKEDGE CORNICE AND ORNAMENT COMPANY. Scale of Cuts : 1 incli = 1 foot. \ No. 518. Height 2^ inches. [ Gauge No. 27 11 per foot. Projection 2M inches. I ** No. 26 13 per foot. Girt 6>g inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. No. 501. Height 1 finches. Gauge No. 27 11 per foot. " No. 26 12 per foot. Projection 1^ inches Girt 5% inches. Cut and Formed Miters 03 each. Complete Miters 15 each. "V No. 510. Height 2)^ inches. I Gauge No. 27 12 per foot. Projection 2^^ inches. | No. 26 13 per foot. Girt 6% inches, j Cut and Formed Miters 04 each. Complete Miters 19 each. V No. 519. Height 23^ inches. | Gauge No. 27 13 per foot. Projection 2% inches. No. 26 14 per foot. Girt 7K inches. Cut and Formed Miters 04 each. Complete Miters 19 each. THE KITTREDGE CORH"ICE AND ORNAMENT COMPANY. 413 Scale of Cuts : 1 inch =^ 1 foot. No. 497. No. No. 27 12 per foot. 26 13 per foot. Height 1% inches. Gauge Projection 1^ inches. " Girt 6% inches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 506. Height 23^ inches. I Gauge No. 27 13 per foot. Projection 2)^ inches. | No. 26 14 per foot. Girt 7% inches. | Cut and Formed Miters 04 each. Complete Miters. ; 19 each. No. 515. Gauge No. 27 14 per foot. No. 26 15 per foot. Height 2K inches. Projection 2% Inches. Girt 8>| inches. Cut and Formed Miters 05 each. Complete Miters 25 each. No. 468. Height . 2 inches. I Gauge No. 27 08 per foot, Profection.V 1^ inches. " No. 26 09 per foot. Girt 3M inches. | Cut and Formed Miters Od each, Complete Miters 1^5 each. 414 THE KITTRED&E CORNICE AKD ORKAMENT COMPAJ?Y, Scale of Cuts : 1 inch = 1 foot. No. 477. Height 2^ inches. Projection 2)^ inches. Girt 4£ inches. Cut and Formed Miters . Gauge No. 27 09 per foot. " No. 26 10 per foot. each. Complete Miters 15 each. No. 486. Height 3 inches. I Gauge No. 27 .10 per foot. Projection 2^ inches. | " No. 26 11 per foot. Girt inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. No. 476. Height 2 inches. | Gauge No. 27 09 per foot. Projection 1^ inches. I " No. 26 10 per foot. Girt 4^ inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. No. 485. Height 2% inches. Projection 2^ inches. Girt 5% inches. Cut and Formed Miters Gauge No. 27 10 per foot. " No. 26 11 per foot. 03 each. Complete Miters 15 each. THE KITTREDGE CORl^^ICE AJ^D Olljq-AMEKT COMPAKY. 415 Scale of Cuts 1 inch — one foot. No. 494. Gauge No. 27 11 per foot. " No. 20 12 per foot. Height 3 inches. Projection 2% inches. Girt 6}£ inches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 471. Gauge No. 27 09 per foot. " No. 26 10 per foot. Height 2 inches. Projection 1% inches. Girt 4% inches. Cut and Formed Miters 03 each. Complete Miters 15 each. No. 480. Height 2^ inches. Projection 2)^ inches. Girt 5% inches. Cut and Formed Miters Gauge No. 27 10 per foot. '* No. 26 11 per foot. 03 each. Complete Miters 15 each. No. 489. Height 3 inches. Projection 2^ inches. Girt &]4 inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. .12 per foot. .13 per foot. .04 each. .19 each. 41G THE KITTREDGE CORNICE AND ORNAMENT COMPANY. Scale of Cuts : 1 inch = 1 foot. No, 475. Height 2 inches. I Gauge No. 27 09 per foot. Projection 1^ inches. | " No. 26 10 per foot. Girt 4% Inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. No. 484. Height 2^ inches. Gauge No. 27 10 per foot. Projection 2^ inches. No. 26 11 per foot. Girt... 5^ inches. Cut and Formed Miters 03 each. Complete Miters 15 each. No. 493. Gauge No. 27 12 per foot. " No. 26 13 per foot. Height S inches. Projection 1 2% inches. Girt Clinches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 472. Gauge No. 27 09 per foot. " No. 26 10 per foot. Height 2 inches Projection 1^ inches Girt 4% inches Cut and Formed Miters 03 each. Complete Miters 15 each THE KITTEEDGE CORl^TICE AND ORN-AMEKT COMPAKY. 417 Scale of Cuts : 1 inch 1 foot. No. 481. Height 2% inches. Projection 2^ inches. Girt 5% inches. Cut and Formed Miters Gauge No. 27 10 per foot. " No. 26 11 per foot. 03 each. Complete Miters 15 each. No. 490. Height 3 inches. Projection 2% inches. Girt..... 6^ inches. Cut and Formed Miters. , Complete Miters Gauge No. ^7, No. 26. .12per foot. .13 per foot. o04 each. .19 each. No. 473. Height 2 inches. Projection 1^ inches. Girt 4% inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. .09 per foot. .10 per foot. .03 each. .15 each. \ No. 482. Height 2X inches. I Gauge No. 27 10 per foot. Projection 2)^ inches. | " No. 26 11 per foot. Girt 5% inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. 418 THE KITTREDGE CORNICE AjSTD ORKAMENT COMPAKY. Scale of Cuts : 1 inch — 1 foot. No. -191. Gauge No. 27 12 per foot. No. 26 13 per foot. Height 3 inches. Projection 2^ inches. Girt 6X inches. Cut and Formed Miters 04 each. Complete Miters .19 each. No. 469. Height 2 inches. I Gauge No. 27 09 per foot. Projection 1^ inches. | " No. 26 10 per foot. Girt 4}^ inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. No. 478. Height 2^ inches. Gauge Projection 2^^ inches. " Girt 5% inches. Cut and Formed Miters 03 each. Complete Miters 15 each. No. 27 10 per foot. No. 26 11 per foot. No. 487. Height 3 inches. Projection 2^ inches. Girt : 6% inches. Cut and Formed Miters Complete Miters Gauge No. 27, " No. 26. .12 per foot. .13 per foot. .04 each. .19 each. THE KITTREDGE COKKICE AKD ORNAMENT COMPANY. 419 Scale of Cuts : 1 inch = 1 foot. No. 470. Height 2 inches. Projection inches. Girt 6% inches. Cut and Formed Miters. , Complete Miters Gauge No. 27. " No. 26. .12 per foot. .13 per foot. .04 each. .19 each. V No. 479. Height 2% inches. Gauge No. 27 13 per foot. Projection inches. " No. 26 14 per foot. Girt ' 7% inches. Cut and Formed Miters 04 each. Complete Miters 19 each. V No. 488. Height 3 inches. | Gauge No. 27 15 per foot. Projection 2|^ inches. I " No. 26 16 per foot. Girt 8^ inches. | Cut and Formed Miters 05 each. Complete Miters , 25 each. No. 474. Height 2 inches. I Gauge No. 27 10 per foot. Projection 1% inches. | " No. 26 11 per foot. Girt 5%; inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. 420 THE KITTREDGE CORKICE AND ORNAMEKT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 483. Height 2^ inches. | Gauge No. 27 12 per foot. Projection 2)^ inches. I " No. 26 13 per foot. Girt inches. I Cut and Formed Miters 04 each. Complete Miters 19 each. No. 492. Gauge No. 27 13 per foot. " No. 26 14 per foot. Height 3 inches. Projection , 2|^ inches. Girt 7^ inches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 558. Height 23^ inches. I Gauge No. 27 .08 per foot. Projection 1>^ inches. | " No. 26 09Derfoot. Girt 3% inches, j Cut and Formed Muurs 03 each. Complete Miters 15 each. No. 567. Height 33^ inches. I Gauge No. 27 10 per foot. Projection 2>i inches. " No. 26 .11 per foot. Girt 5^ inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. ! THE KITTREDGE CORjq-ICE AND ORXAMENT COMPAKY. 421 Scale of Cuts : inch 1 foot. I C No. 576. Height 4 inches. I Gauge No. 27 12 per foot. Projection 2^ inches. | " No. 26 13 per foot. Girt Clinches. \ Cut and Formed Miters 04 each. Complete Miters 19 each. No. 559. Height..., 23^ inches. Projection , Girt Cm and Formed Miters . 1% inches. 5% inches. Gauge No. 27 .10 per foot. " No. 2G 11 per foot. 03 each. Complete Miters 15 each. No. 568. Height 33^ inches. I Gauge No. 27 13 per foot. Projection ; 2>i inches. " No. 2G 14 per foot. Girt . 71^ inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. No. 577. Height 4 inches. I Gauge No. 27 14 per foot. Projection 2^ inches. " No. 26 . . .15 per foot. Girt 8% inches. | Cut and Formed Miters 05 each. Complete Miters , , 25 each. 4:22 THE KITTREDGE CORN^ICE AKD ORNAMEN^T COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 561. Height 2}i inches. Gauge No. 27 .10 per foot. Projection 1%" inches. " No. 26 11 per foot. Girt S^' inches. Cut and Formed Miters 03 each. Complete Miters 12 each. C No. 570. Height 33^ inches. J Gauge No. 27 13 per foot. Projection 2>^ inches. | " No. 26 14 per foot. Girt 7)^ inches. | Cut and Formed Miters .04 each. Coirplete Miters o 19 each. No. 579. Height 4 inches. I Gauge No. 27 14 per foot. Projection 2% inches. | No. 26 15 per foot. Girt. Scinches. | Cut and Formed Miters . 05 each. Complete Miters 25 each. No. 562. Height inches. Projection 1% inches. Girt 4% inches. Cut and Formed Miters Gauge No. 27 09 per foot. " No. 26 10 per foot. 03 each. Complete Miters 15 each. THE KITTREDGE CORiq^ICE AKD ORN"AMENT COMPANY. 423 Scale of Cuts : 1 inch = 1 foot. No. 571. Projection. Girt . . . o 2)4 inches. 6% inches. Cut and Formed Miters 04 each Complete Miters 19 each Gauge No. 27 12 per foot. " No. 26 13 per foot. No. 580. Gauge No. 27 14 per foot. " No. 26 15 per foot. Height 4 inches. Projection 2^ inches. Girt inches. Cut and Formed Miters ' 04 each. Complete Miters 19 each. No. 564. Gauge No. 27 10 per foot. " No. 26 11 per foot. Height 2}i inches. Projection 1^ inches. Girt 5% inches. Cut and Formed Miters 03 each. Complete Miters 15 each. No. 573. Height 33^ inches. I Gauge No. 27 : 13 per foot. Projection 23^ inches. | " No. 26..' 14 per foot. Girt 7% inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. 424 THE KITTEEDGE CORNICE AND ORNAMENT COMPANY. Scale oi Cuts : 1 inch = 1 foot. No. 582. Gau^e No. 27 15 per foot. " No. 26 16 per foot. Height 4 inches Projection 2% inches Girt 8% inches Cut and Formed Miters 04 each. Complete Miters 19 each. No. 565. Height 2>^ inches. | Gauge No. 27 09 per foot. Projection 1% inches. No. 26 10 per foot. Girt 4% inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. No. 574. Height 33^ inches. Projection 2)^ inches. Girt 63^ inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. .12 per foot. .13 per foot. .04 each. ,19 each. No. 583. Height 4 inches. Projection 2% inches. Girt 7% inches. Cut and Formed Miters Gauge No. 27. No. 26. . 13 per foot. .14 per foot. Complete Miters. ,04 each. ,19 each. THE KITTREDGE COEiq"ICE AND ORI^-AMEKT COMPANY. 425 Scale of Cuts : 1 inch 1 foot. No. 566. Height.... Projection, Girt Gauge No. 27 09 per foot. " No. 26 10 per foot. 2)4 inches. 1% inches. 4}4 inches. Cut and Formed Miters 03 each. Complete Miters 15 each. No. 575. Gauge No. 27 11 per foot. " No. 26 12 per foot. Height Z}{ inches. Projection 2>| inches. Girt QX inches. Cut and Formed Miters 04 each, Complete Miters 19 each. No. 584. Height 4 inches. Projection 2^ inches. Girt 7% inches. Cut and Formed Miters Gauge No. 27 13 per foot. " No. 26 14 per foot. .04 each. Complete Miters 19 each. C No. 569. Height 33^ inches. I Gauge No. 27 14 per foot. Projection 2)1; inches. | " No. 26 15 per foot. Girt Scinches. | Cut and Formed Miters 04 each. Complete Miters 19 each. 426 THE KITTREDGE CORJsICE AND ORlsTAMEi^T COMPAIS^Y. Scale of Cuts : 1 inch =- 1 foot. c No. 578. Height.. !" 4 inches. I Gauge No. 27 16 per foot. Projection 2^ inches. " No. 26 17 per foot. Girt 9% inches. | Cut and Formed Miters 05 each. Complete Miters 25 each. No. 572. Height 33^ inches. I Gauge No. 27 12 per foot. Projection, 2>| inches. " No. 26 13 per foot. Girt....... : 6X i^iches. | Cut and Formed Miters 04 each. Comolete Miters 19 each. No. 581. Height 4 inches. I Gauge No. 27 13 per foot. Projection. 2^ inches. " No. 26 14 per foot. Girt.. 7% inches. | Cut and Formed Miters. 04 each. Complete Miters 19 each. No. 522. Height... 2X inches. Projection 2^ inches. Girt 4^ inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. .03 each. .15 each. .09 per foot. .10 per foot. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 427 Scale of Cuts : 1 inch = 1 foot. No. 531. Height 3% inches. Projection 3>^ inches. Girt 5% inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. .10 per foot. .11 per foot. .03 each. .15 each. No. 540. Height S% inches. Projection 3^ inches. Girt G% inches. Cut and Formed Miters , Complete Miters Gauge No. 27. " No. 26. .12 per foot. .13 per foot. .04 each, .19 each. No. 549. Height 5)^ inches. Projection 4% inches. Girt 8X inches. Cut and Formed Miters Complete Miters , Gauge No. 27. " No. 26. .15 per foot. .16 per foot. .05 each. 25 each. No. 523. Height 21^ inches. Projection 23^ inches. Girt... 6X inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. .12 per foot. .13 per foot. .03 each. ,15 each. 428 THE KITTREDGE CORXICE AXD ORInTAMENT COMPAJ^Y. Scale of Cuts : 1 inch = 1 foot. No. 532. Height.... Projection. Girt Cut and Formed Miters. Complete Miters 3% inches. SJ^ inches. 7X inches. Gauge No. 27, " No. 26. .13 per foot. .14 per foot. .04 each. 19 each. No. 541. Height 3% inches. Projection 3^ inches. Girt 8X inches. Cut and Formed Miters Complete Miters Gauge No. 27, " No. 20. .14 per foot. .15 per foot. .05 each. .25 ea:.'h. 550. Height 5)^ inches. Projection 4^ inches. Girt 10>^ inches. Cut and Formed Mjters Complete Miters „ Gauge No. 27. " No. 26. .17 per foot. .18 per foot. .06 each. ,31 each. No. 530. Height 2X inches. Projection 23|'inches« Girt 5% inches. Cut and Formed Miters Gauge No. 27. No. 26. .10 per foot. .11 per foot. Complete Miters. 03 each. ,15 each. THE KITTREDCtE CORKICE AHD ORNAMENT COMPANY. 429 Scale of Cuts : 1 incti = 1 foot. No. 539. Gauge No. 27 12 per foot. No. 36 13 per foot. Height inches. Projection 3)^ inches. Girt 6% inches. Cut and Formed Miters 04 each Complete Miters 19 each No. 548. Gauge No. 27 13 per foot. " No. 26 14 per foot. Height 3% inches. Projection 3^ inches. Girt 7X inches. Cut and Formed Miters 04 each. Complete Miters 19 each. ~2io. 557. Height 5}{ inches. Projection 4|| inches. Girt 9^ inches. Cut and Formed Miters Gauge No. 27 16 per foot. " No. 26 17 per foot. 05 each. Complete Miters .25 each. No. 529. HeigM.., 23^ inches, j Gauge No. 27 10 per foot. Projection 2^ inches. | " No. 26 11 per foot. Girt 5% inches. | Cut and Formed Miters 03 each. Complete Miters 15 each. 430 THE KITTEEDGE CORKICE AKD OEN^AMEJ^T COMPAIiTy. Scale of Cuts 1 inch ==- one foot. No, 538. Height 3>^ inches. I Gauge No. 27 12 per foot. Projection 3>g inches. | " No. 26 13 per foot. Girt 6% inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. No. 547. Height 2% inches. Projection S% inches. Girt 7% inches. Cut and Formed Miters Gauge No. 27 13 per foot. *' No. 26 14 per foot. 04 each. Complete Miters .' 19 each. No. 556. Height 5)^ inches. I Gauge No. 27 18 per foot. Projection 4^ inches. | " No. 26 19 per foot. Girt 10^ inches. | Cut and Formed Miters 06 each. Complete Miters 31 each. No. 525. Height 2X inches. I Gauge No. 27 12 per foot. Projection 2>^ inches. | " No. 26 13 per foot. Girt 6% inches. | Cut and Formed Miters 03 each. Complete Miters 15 each . THE KITTREDGE CORXICE Ais^D ORXAMEKT COMPAJiTy. 431 Scale of Cuts : 1 inch = 1 foot. No. 534. Height 33^ inches. Projection 3>^ inches. Grirt 7}{ inches. Cut and Formed Miters " 04 each. Complete Miters ' ,19 each! Gauo:e No. 27 .18 per foot. " No. 26 14 per foot. No. 543. Gauge No. 27 14 per foot. " No. 26 15 per foot. Height 3K inches. Projection Scinches. Girt. 8)1 inches. Cut and Formed Miters ' 05 each. Complete Miters 25 each. No. 552. Height 53^ inches. | Gauge No. 27 17 per foot. Projection 4% inches. No. 26 .18 per foot. Girt lOX inches. | Cut and Formed Miters , 06 each. Complete Miters 31 each. No. 526. Height 2K inches. Projection 23^ inches. Girt 5% inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. .10 per foot. .11 per foot. .03 each. .15 each. 432 THE KITTREDGE CORJ«riCE AND ORjS'AMEJ^T COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 535. Height 8X inches. Gauge No. 27 12 per foot. Projection 33^ inches. No. 26 13 per foot. Girt 6% inches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 544. Height 3% inches. Gauge No. 27 13 per foot. Projection 3^ inches. " No. 26 14 per foot. Girt 7% inches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 553. Height 53^ inches. Projection 4% inches. Ciri 9% inches. Cut and Formed Miters Gauge No. 27 16 per foot. No. 26 17 per foot. 05 each. Complete Miters 25 each. No. 527. Height 2X inches. Projection 2>i' inches. Girt 5% inches. Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. .10 per foot. .11 per foot. .03 each. .15 each. THE KITTREDGE CORIylCE AND ORIs^AMEXT COMPANY. 433 Scale of Cuts : 1 inch = 1 foot. No. 536. Gauge No. 27 12 per foot. *' No. 26 13 per foot. Height 3X inches Projection 3% inches Girt Q'X inches Cut and Formed Miters 04 each Complete Miters 19 each No. 545. Gauge No. 27 13 per foot. " No. 26 14 per foot. Height o% inches. Projection 3% inches. Girt 7^ inches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 554. Height : 5)^ inches. Projection 4^ inches. Girt 9X inches. Cut and Formed Miters Gauge No. 27 16 per foot. " No. 26 17 per foot. 05 each. Complete Miters 25 each. No. 524. Height 2>^ inches. I Gauge No. 27 13 per foot. Projection 2)^ inches. | " No. 26 14 per foot. Girt 7% inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. 43i THE KITTREDGE CORJ^ICE AKD ORKAMENT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 533. Gauge No. 27 14 per foot. " No. 26 15 per foot. Height 3>g inches. Projection 3>g inches. Girt inches. Cut and Formed Miters 05 each. Complete Miters 25 each. No. 542. Gauge No. 27 16 per foot. " No. 26 17 per foot. Height S% inches. Projection 3^ Inches. Girt 9% inches. Cut and Formed Miters 05 each. Complete Miters 25 each. No. 551. Gauge No. 27 19 per foot. " No. 26 20 per foot. Height 53^ inches. Projection 4^ inches. Girt 11% inches. Cut and Formed Miters 06 each. Complete Miters 31 each. No. 528. Height 2>^ inches. I Gauge No. 27 13 per foot. Projection 2>^ inches. " No. 26 14 per foot. Girt 7>J inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. THE KITTRED&E CORXICE A^^B ORNAMENT COMPANY. 435 Scale of Cuts : 1 inch = 1 foot. No. 537. Heio:ht 3>^ inches. | Gauge No. 37 14r,perfoot. Projection 3>8 inches. " No. 26 15 per foot. Girt S% inches. | Cut and Formed Miters 05 each. Complete Miters 25 each. No. 546. Gauge No. 27 16 per foot. " No. 26 17 per foot. Height 3% inches. Projection 3^ inches. Girt 9% inches. Cut and Formed Miters 05 each, Complete Miters 25 each. No. 555. No. 27 19 per foot. No. 26 20 per foot. Height inches. | Gauge Projection 4^ inches. I " Girt 11% inches. | Cut and Formed Miters 06 each. Complete Miters ■ " 31 each. 430 THE KITTREDGE CORN"ICE AND ORi^AMEIs^T COMPANY. DENTIL & MODILLION MOULDINGS, GALVANIZED-IRON. No Extra Charge for Patterns on any of the Styles here Presented. EIGHT-FOOT LENGTHS. Scale of Cuts : 1 inch == 1 foot. No. 715. Height 2^ inches. I Gauge No. 27... Projection 1^ inches. | " No. 26..* Girt 5^ inches. | Cut and Formed Miters Complete Miters 10 per foot. 11 per foot. .03 each. .15 each. No. 712. Height 23^ inches. | Gauge No. 27 12 per foot. Projection 2)1 inches. " No. 26 13 per foot. Girt 6£ inches. I Cut and Formed Miters 04 each. Complete Miters 19 each. No. 709. Height inches. Projection ^% inches. Girt 6M inches. Cut and Formed Miters , Complete Miters Gauge No. 27. " No. 26. .12 per foot. .13 per foot. ,04 each. ,19 each. THE KITTREDGE COllXICE AKD ORN"AMEi^T CO-MPAJq-y. 437 Scale of Cuts : 1 inch = 1 foot. No. 717. Height . . . . Projection. Girt 2% inches. 1^ inches. 5% inches. Cut and Formed Miters 03 each. Complete Miters [ [ *15 each.* Gauge No. 27 10 per foot. " No. 26 11 per foot. Height.... Projection, Girt No. 714. Gauge No. 27 12 per foot. No. 26 13 per foot. 2X inches. 2)1' inches. 6% inches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 711. Height 3^ inches. | Gauge No. 27 12 per foot. Projection 2^ inches. " No. 26 13 per foot. Girt. 6^ inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. No. 716. Height 2^ inches, j Gauge No. 27 12 per foot. Projection 1^ inches. " No. 26 13 per foot. Girt 6% inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. i 438 THE KITTREDGE CORIS^ICE AND ORNAMEKT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 713. Height 23>^ inches. I Gauge No. 27 .13 per foot. Projection inches. ( No. 26 14 per foot. Girt 7% inches, j Cut and Formed Miters 04 each. Complete Miters 19 each. No. 710. Height 3^ inches. | Gauge No. 27 13 per foot. Projection Scinches. I *' No. 26 14 per foot. Girt 7% inches. | Cut and Formed Miters 04 each. Complete Miters .19 each. No. 718. Height 2K inches. Gauge No. 27 10 per foot. Projection 1^ inches. " No. 26 11 per foot. Girt 5)4 inches. Cut and Formed Miters .03 each. Complete Miters 15 each. No. 658. Height 3 inches. I Gauge No. 27. . . . , 11 per foot. Projection 2);^ inches. | " No. 2G...... 12 per foot. Girt G% inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. Scale of Cuts 1 incli = one foot. No. 661. Gauge No. 27 12 per foot. " No. 26 13 per foot. Height Scinches. Projection 2^ inches. Girt inches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 720. Height 2K inches. I Gauge No. 27 10 per foot. Projection 1^ inches. " No. 26 11 per foot. Girt Scinches. | Cut and Formed Miters 03 each. Complete Miters 15 each. No. 656. Gauge No. 27 11 per foot. No. 26 12 per foot. Height 3 inches. Projection 2>^ inches. Girt 6^ inches. Cut and Formed Miters 04 each. Complete Miters 19 each. No. 659. Gauge No. 27 • 12 per foot. " No. 26 13 per foot. Height Scinches. Projection 2^ inches. Girt . , 7X inches. Cut and Formed Miters ' 04 each Complete Miters 1^ each uo THE KITTREDGE CORNICE AXD 0R5q"AMEKT COMPANY. Scale of Cuts : inch — 1 foot. No. 719. Gauge No. 27 12 per foot. " No. 26 13 per foot. Height 2K inches. Projection IM inches. Girt . . • 6% inches. Cut and Formed Miters = . . . , .04 each Complete Miters » . . , .19 each No. 657. Height 3 inches. I Gauge No. 27 13 per foot. Projection 2}{ inches. | " No. 26 14 per foot. Girt 7% inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. No, 660. Height: 33^ inches. | Gauge No, 27. . , 14 per foot. Projection 2% inches, | " No. 26... 15 per foot. Girt 8% inches. | Cut and Formed Miters 05 each. Complete Miters 25 each. No. 664. Gauge No. 27 13 per foot. " No. 26 13 per foot. Height 3^ inches. Projection 211" inches. Girt Clinches. Cut and Formed Miters 04 each. Complete Miters 19 each. THE KITTREDGE CORNICE AJ^D ORKAMEKT COMPAXY. 441 Scale of Cuts 1 inch = one foot. No. 667. Height 3% inches. I Gauge No. 27 13 per foot. Projection 3>| inches. No. 26 14 per foot. Girt 7^ inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. No. 670. Height 4% inches. Projection Scinches. Girt 8% inches. Cut and Formed Miters Gauge No. 27 14 per foot. " No. 26 15 per foot. 05 each. Complete Miters 25 each. Height 6 inches. | Gauge No. 27 17 per foot. Projection 4|£ inches. I " No. 26 18 per foot. Girt 10% inches. I Cut and Formed Miters 06 each. Complete Miters 31 each. No. 662. Height 33^ inches. I Gauge No. 27 12 per foot. Projection inches. No. 26 13 per foot. Girt 6M inches. | Cut and Formed Miters 04 each. Complete Miters 19 each. 443 THE KITTREDGE CORI^ICE AND ORN'AMEi^"! COMPAisTY. Scale of Cuts : 1 incti == 1 foot. No. 665. Height 3% inches. Projection Scinches. Girt.ooo... 8% inches. Cut and Formed Miters. Complete Miters Gauge No. 27, No. 26. .14 per foot. .15 per foot. .05 each. .25 each. No. 668. Gauge No. 2? 14 per foot. " No. 26 15 per foot. Height . „ 4% inches. Projection S% inches. Girt.... : 8% inches. Cut and Formed Miters 05 each. Complete Miters 25 each. No. 671. Height 6 inches. Projection 4^ inches. Girt 10% inches. Cut and Formed Miters Gauge No. 27 17 per foot. No. 26 18 per foot. 06 each. Complete Miters 31 each. No. 663. Height 33^ inches. I Gauge No. 27 13 per foot. Projection 2>^ inches. | " No. 26 14 per foot. Girt..... 8X inches. [ Cut and Formed Miters 04 each. Complete Miters 19 each. THE KITTREDGE CORKICE AIs^D OR^-AMEN^T COMPANY. 443 Scale of Cuts : 1 inch = 1 foot. No. 656. Height 3% inches. I Gauge No. 27 14 per foot. Projection 3>^ inches. | " No. 26 15 per foot. Girt 8% inches. | Cut and Formed Miters 05 each. Complete Miters 25 each. No. 669. Gauge No. 27 17 per foot. " No. 26 18 per foot. Height 4% inches. Projection Scinches. Girt lOX inches. Cut and Formed Miters 06 each. Complete Miters 31 each. No, 672, Gauge No. 27 20 per foot. " No. 26 21 per foot. Height 6 inches. Projection 4% inches. Girt 12X inches. [ Cut and Formed Miters 07 each. Complete Miters 37 each. 444 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. GALVANIZED-IRON FOOT-MOULDINGS. "No Extra Charge for Patterns on any of the Styles here Presented. FOOT-MOULDmGS AKE SHIPPED IN EIGHT-FOOT LENGTHS. Scale of Cuts : 1 inch = 1 foot. No. 611. Height inches. I Gauge No. 27 .17perfoot. Projection 2)1' inches. | No. 26..- .18 per foot. Girt 10)^ inches. | No. 24... .19 per foot. Cut and Formed Miters 05 each. Complete Miters. 25 each. No. 614. Height... inches. Gauge No. 27 .22 per foot. Projection 3>| inches. " No. 26 ,24 per foot. Girt 13X inches. " No. 24 .25 per foot. Cut and Formed Miters .07 each. Complete Miters 37 each. No. 609. Height 33^ inches. Projection 2)| inches. Girt 9% inches. Cut and Formed Miters Complete Miters , Gauge No. 27. No. 26. No. 24. .05 each. .25 each. .16 per foot. .17 per foot. .18 per foot. THE KITTREDGE COllNICE AIsD ORJs"AMEJsT COMPANY. 445 Scale of Cuts : 1 inch = 1 foot. No. 612. Height inches. Projection 3>^ inches. Girt 13>^ inches. Cut and Formed Miters Complete Miters Gauge No. 27. 22 per foot. " No. 26 24 per foot. No. 24 25 per foot. 07 each. 37 each. < No. 610. Height 3)^ inches. I Gauge No. 27 15 per foot. Projection 2^ inches. No. 20 16 per foot. Girt 8% inches. | " No. 24 , 17 per foot. Cut and Formed Miters 05 each. Complete Miters 25 each. No. 613. Height 53^ inches Projection S^i" inches Girt 11% inches Gauge No. 27 19 per foot. " No. 26 21 per foot. " No. 24 .22 per foot. Cut and Formed Miters. 06 each. Complete Miters 31 each. No. 703. Height 33^ inches. I Gauge No. 27 16 per foot. Projection 23^' inches. " No. 26 17 per foot. Girt 9=X inches. | " No. 24 18 per foot. Cut and Formed Miters . . .' 05 each. Complete Miters 25 each. 440 THE KITTREDGE CORNICE AN"D ORKAMEKT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 704. Height Scinches. | Gauge No. 27 21 per foot. Projection 3>^ inches. I " No. 26 22 per foot. Girt 12X inches. | No. 24 23 per foot. Cut and Formed Miters 07 each. Complete Miters 37 each. No. 616. Height inches. Projection 3)^ inches. Girt 11% inches. Gauge No. 27 19 per foot. No. 26 21 per foot. " No. 24 22 per foot. Cut and Formed Miters 06 each. Complete Miters 31 each. No. 619. Height 7% inches. Projection 4)J inches. Girt 14% inches. Cut and Formed Miters Gauge No. 27 , 24 per foot. " No. 26 25 per foot. " No. 24 27 per foot. 08 each. Complete Miters 38 each. Height...., Scinches. Projection 33^ inches. Girt 13^ inches. Cut and Formed Miters No. 615. Gauge No. 27 22 per foot. No. 26 24 per foot. " No. 24 25 per foot. 07 each. Complete Miters 37 each. THE KITTREDGE CORlSi-ICE AJnTD ORI^AMENT COMPANY. 447 Scale of Cuts : 1 inch = 1 foot. < No. 618. Height 7^ inches. | Gauge No. 27 , Projection 4)^ inches. *' No. 26 Girt 16% inches. | " No. 24 Cut and Formed Miters 09 each. Complete Miters 44 each. .27 per foot. .28 per foot. .30 per foot. No. 617. Height h% inches. Projection 3>^ inches. Girt 13% inches. Gauge No. 27 22 per foot. " No. 26 .24 per foot. No. 24 25 per foot. Cut and Formed Miters 07 each. Complete Miters 37 each, No. 620. Height • 7% inches. | Gauge No. 27 27 per foot. Projection 4)^ inches. " No. 26 28 per foot. Girt 17j^ inches. | No. 24 30 per foot. Cut and Formed Miters 09 each. Complete Miters 44 each. No. 705. Height inches. Projection 3^^ inches. Girt • I33J inches. Gauge No. 27 22 per foot. No. 26 23 per foot. No. 24 24 per foot. Cut and Formed Miters 07 each. Complete Miters 37 each. 448 THE KITTKEDGE CORKICE AKD OKi^AMEHT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 706. Height , , . . o . . o . 7% inches. | Gau^e No. 27 .26 per foot. Projection 4)^ inches. I No. 26 28 per foot. Girt 16^ inches. | " No. 24 , .29 per foot. Cut and Formed Miters 09 each. Complete Miters 44 each. No. 707. Height 7^ inches. Projection inches. Girt. 14:% inches. Cut and Formed Miters Gauge No. 27 24 per foot. No. 26 25 per foot. No. 24 27 per foot. 08 each. Complete Miters. 38 each. No. 708. Height 103^ inches. Projection 4)^ inches. Girt 19 ~ inches. Cut and Formed Miters Gauge No. 27 29 per foot. No. 26 31 per foot. " No. 24 33 per foot. 10 each. Complete Miters 50 each. THE KITTREDGE CORXICE AND OKXAMEIsT COMPANY. •i-iO Scale of Cuts : 1 inch = 1 foot. No. 622. Height 7^ inches. Projection SX inches. Girt 13% inches. Gauge No. ?7 22 per foot. " No. 26 24 per foot. " No. 24 25 per foot. Cut and Formed Miters 07 each. Complete Miters 37 each. No. 625. Height lOK inches. Projection 4)^ inches. Girt 17)1 inches. Cut and Formed Miters Gauge No. 27 28 per foot. No. 26 30 per foot. No. 24 32 per foot. 09 each. Complete Miters 44 each. No. 623. Height. 7% inches. Projection 3>J inches. Girt 15% inches. Gauge No. 27 25 per foot. ' No. 26 27 per foot. No. 24 28 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. 450 THE KITTEEDGE CORXICE AKD ORISrAME^rT COMPANY. &cale of Cuts : inch 1 foot. No. 626. Height lOK inches. Projection inches. Girt 20X inches. Gauge No. 27 32 per foot. " No. 26 34 per foot. No. 24 36 per foot. Cut and Formed Miters 12 each. Complete Miters 57 each. No. 621. Height 7^ inches. I Gauge No. 27 .25 per foot. Projection 3>^ inches. | " No. 26 27 per foot. Girt 15>^ inches. | " No. 24 28 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. No. 624. Height..... lOX inches. Projection 4)^ inches. Girt 20K inches. Gauge No. 27 32 per foot. No. 26 34 per foot. No. 24 36 per foot. Cut and Formed Miters 12 each. Complete Miters. 57 each. THE KITTREDGE CORNICE AKD ORi^AMEXT COMPA]S"Y. 451 Scale of Cuts : 1 inch = 1 foot No. 586. Height 33^ inches. Projection 2% inches. Girt Scinches. Gauge No. 27 15 per foot. " No. 26 16 per foot. " No. 24 17 per foot. Cut and Formed Miters 05 each Complete Miters 25 each. No. 585. Height inches. I Gauge No. 27 19 per foot. Projection 2% inches. | No. 26 20 per foot. Girt 11% inches, j No. 24 21 per foot. Cut and Formed Miters 06 each. Complete Miters 31 each. 589. Height 5^ inches. I Gauge No. 27 19 per foot. Projection 3% inches. | " No. 26 21 per foot. Girt 11% inches. | " No. 24 22 per foot. Cut and Formed Miters 06 each. Complete Miters 31 each. No. 590. Height 5% inches. Projection 3% inches. Girt 14% inches. Cut and Formed Miters Complete Miters Gauge No. 27. No. 26. No. 24. .08 each. .38 each. .23 per foot. .25 per foot. .26 per foot. 452 THE KITTREDGE CORISTICE AND ORKAMEI^'T COMPAJ^Y. Scale of Cuts : 1 inch = 1 foot. No. 588. Height Scinches. Projection S% inches. Girt 13% inches. Cut and Formed Miters Gauge No. 27 22 per foot. " No. 26 24 per foot. No. 24 25 per foot. 07 each. Complete Miters 37 each. No. 587. Height 33^ inches. I Gauge No. 27.. 19 per foot. Projection. 2% inches. " No. 26 21 per foot. Girt 11% inches. | " No. 24 22 per foot. Cut and Formed Miters 06 each. Complete Miters 31 each. No. 593. Height 6 it;ches. I Gauge No. 27 26 per foot. Projection 4^ inches, | " No. 26 28 per foot. Girt lex inches. | " No. 24 29 per foot. Cut and Formed Miters 09 each. Complete Miters 44 each. No. 596. Height inches. Projection, 5>^' inches. Girt. 18X inches. Cut and Formed Miters. , Complete Miters Gauge No. 27. " No. 26. " No. 24. .09 each. .44 each. .28 per foot. .30 per foot. .32 per foot. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 453 Scale of Cuts : 1 inch == 1 foot. No. 674. Height..., 33^ inches. I Gauge No. 27 , 18 per foot. Projection 2% inches. '* No. 26 19 per foot. Girt.... 10% inches. | " No. 24 20 per foot. Cut and Formed Miters ,06 each. Complete Miters 31 each. Height inches. Projection inches. Girt 17)^ inches. Gauge No. 27 28 per foot. " No. 26 30 per foot. No. 24 32 per foot. Cut and Formed Miters .09 each. Complete Miters 44 each. No. Height.... 6 inches. Projection 4% inches. Girt 13^ inches. No. 27 .22 per foot. No. 26 24 per foot. No. 24 , 25 per foot. Cut and Formed Miters 07 each. Complete Miters. 37 each. No. 595. Height.. 6^ inches. Projection 5>| inches. Girt 15% inches. Gauge No. 27 25 per foot. No. 26 o 27 per foot. No. 24 28 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. 1 454 THE KITTREDGE CORJy'ICE AKD ORKAMEKT COMPAKY. Scale of Cuts : 1 inch = 1 foot. C No. 591. Height 6 inches. | Gauge No. 27 25 per foot. Projection 4 inches. " No. 26 27 per foot. Girt 15K inches. | " No. 24 28 per foot. Cut and Formed Miters , .08 each. Complete Miters 38 each. Height 6%" inches. Projection 5)/^ inches. Girt 17% inches. Gauge No. 27 28 per foot. " No. 26 30 per foot. No. 24 32 per foot. Cut and Formed Miters 09 each. Complete Miters 44 each. Height 5^ inches. Projection 3% inches. Girt 13>^ inches. Cut and Formed Miters , Complete Miters 675. Gauge No. 27. " No. 26. " No. 24. .07 each. ,37 each. .22 per foot. ,24 per foot. .25 per foot. No, 676. Height 6 inches. I Gauge No. 27. Projection 4;^ inches. | " No. 26. Girt 15% inches. | " No. 24. Cut and Formed Miters Complete Miters . ,08 each. .38 each. .25 per foot. .27 per foot. .28 per foot. THE KITTREDGE CORXICE AXD OllXAMEXT CO:krPAXY. 455 Scale of Cuts : 1 inch = 1 foot. Height 5^ inches. Projection Sj^ inches. Girt 12>^ inches. Cut and Formed Miters , Gauge No. 27 20 per foot. " No. 26 22 per foot. " No. 24 23 per foot. .07 each. Complete Miters 37 each. No. 601. Height 8 inches. Projection 4^ inches. Girt 15)1 inches. Gauge No. 27 25 per foot. " No. 26 27 per foot. No. 24 23 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. No. 604. Height 103^ inches. Projection 5^ inches. Girt 19 inches. Gauge No. 27 29 per foot. " No. 26 31 per foot. No. 24 33 per foot. Cut and Formed Miters 10 each. Complete Miters 50 each. 450 THE KITTREDGE CORKICE AXD ORl^AMEKT COMPAKY. Scale of Cuts : inch 1 foot. No. 607. Height 11% inches. | Gauge No. 27. Projection 5% inches. " No. 26. Girt 20% inches. I "No. 24. Cut and Formed Miters Complete Miters. .12 each. .57 each. .32 per foot. .34 per foot. .36 per foot. No. 597. Height 5% inches. Projection 3>| inches. Girt 14^ inches. Gauge No. 27 23 per foot. " x\o. 26..- 25 per foot. No. 24 26 per foot. Cut and Formed Miters 08 each. Complete Miters 38 each. No. 600. Height.......... 8 inches, j Gauge No. 27 28 per foot. Projection... 43^ inches. | " No. 26 .30 per foot. Girt 17>| inches. | " No. 24 , 32 per foot. Cut and Formed Miters 09 each. Complete Miners 44 each. No. 603. Height lOK inches. Projection 5^ inches. Girt 20^ inches. Cut and Formed Miters Gauge No. 27 32 per foot. No. 26 34 per foot. " No. 24 36 per foot. 12 each. Complete Miters 57 each. THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 457 Scale of Cuts 1 inch == one foot. No. 606, Height, , 11 finches. Projection 5% inches. Girt 22X inches Gauge No. 27 35 per foot. " No. 26 as per foot. No. 24 40 per foot. Cut and Formed Miters 14 each. Complete Miters. 64 each. No. 599. Height.... Projection, Girt Cut and Formed Miters. 5% inches. 3X inches. 15 inches. Gauge No. 27 .24 per foot. " No. 26 25 per foot. " No. 24 27 per foot. .08 each. Complete Miters 38 each. Height 8 inch Projection 4V^ inches. Girt 17^ inches. Cut and Formed Miters Gauge No. 27 28 per foot. <' No. 26 30 per foot. " No. 24 32 per foot. 09 each. Complete Miters 44 each. Height lOX inches Projection 5% inches. Girt 21j^ inches, No. 605. _ Gauge No. 27 33 per foot. " No. 26 35 per foot. No. 24 37 per foot. Cut and Formed Miters 12 each. Complete Miters 57 each. 458 THE KITTREDGE COEIs'ICE AKD ORiq"AMEKT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 608. Height 11% inches. Projection 5>| inches. Girt 231^ inches. Gauge No. ?7 35 per foot. " No. 26 38 per foot. No. 24 40 per foot. Cut and Formed Miters 14 each. Complete Miters 64 each. No. 699. Height Scinches. Projection 3)1" inches. Girt 141^ inches. Gauge No. 27 23 per foot. " No. 26 25 per foot. No. 24 26 per foot. Cut and Formed Miters 07 each. Complete Miters 37 each. No. 700. Height 8 inches. I Projection 4}-^ inches. | Girt 17 inches, j Cut and Formed Miters Complete Miters Gauge No. 27. " No. 26. " No. 24. .09 each. .44 each. .27 per foot. .28 per foot. .30 per foot. THE KITTKED&E CORXICE AND OEIS^AMENT COMPANY. 459 Scale of Cuts : 1 inch = 1 foot. Height,.., lOX inches. Projection. b% inches. Girt 20^ inches. Cut and Formed Miters Complete Miters Gauge No. 37. " No. 26. No. 24. .12 each. .5Teach. .32 per foot. .34 per foot. .36 per foot. Height 11^ inches. Projection b]4 inches. Girt 22K inches. Cut and Formed Miters Complete Miters. . . . . , Gauge No. 27 35 per foot. " No. 26 38 per foot. " No. 24 40 per foot. each. each. 4G0 THE KITTREDGE CORKICE AXD ORKAMENT COMPAKY. PRICE LIST OF GALVANIZED IRON PLANCEERS, FRIEZES, AND OTHER PLAIN SURFACES, For use with the various Mouldings on preceding pages. For Price List of Miters, refer to note, page 387. Gauge No. 27. Gauge No. '26. Gauge No, 24. GIRT-Inches. o O 03 1-1 a o o . W a? PS go Plain Planceer, with necessary Bends for Joints. Crimped Planceer, with necessary Bends for Joints. Plain Frieze, with necessary Bends for Joints. Ceimped Frieze, with necessary Bends for Joints. GIRT-Inches. LIN Iron, to width, > Bends. o o . W 03 l-H-d Q « & M S o K h MPED Planceer, ith necessary Bends ir Joints. Plain Frieze, with necessary Bends for Joints. Crimped Frieze, with necessary Bends for Joints. GIRT-Inches. i o ^ . O CO 1— 1 o MP'D Iron, to width, ) Bends. Plain Planceer, with necessary Bends for Joints. MPED Planceer, ith necessary Bends r Joints. Plain Frieze, with necessary Bends for Joints. 2 hi Ph O Ph 3 « o T-FACE CORBEL IN PLACE OF SHORT CORBEL. No. 12. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.86 4.36 33 to 35 inches 2.96 4.51 36 to 38 inches 3.16 4 76 39 to 42 inches 3.46 5.11 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 13. Width of Frame Cut and Formed. Complete. 32 inches and less 1.90 • 3.10 33 to 35 inches 2.00 3.25 36 to 38 inches 2.20 3.50 39 to 42 inches 2.50 3.85 EXTRAS. Patterns for either size here given 65 Construction drawings Avith cut and formed work .30 No. 14. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.56 3.92 33 to 35 inches • 2.6G 4.07 30 to 38 inches 2.86 4.32 39 to 42 inches 3.16 4,67 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 15. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.82 4.24 33 to 35 inches 2.92 4.39 36 to 38 inches 3.12 4.64 39 to 42 inches 3.42 4.99 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SIMILAR TO NO. 14, HAVING LOXG PLAIN-FACE CORBEL IN PLACE 01'' SHORT CORBEL. No. 16. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.88 4.38 .33 to 35 inches 2.98 4.53 36 to 38 inches 3.18 4.78 39 to 42 inches 3.48 5.13 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 4G4 THE KITTKEDGE CORiq"ICE AKD ORJ^TAMEKT COMPAKY. Scale of Cuts 3^ incli = oue foot. No. 17. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.14 4.18 83 to 35 inches 2.24 4.33 36 to 38 inches 2.44 4.58 39 to 42 inches 2.74 4.93 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 17, WITH SHORT PLAIN-FACE CORBEL. No. 18. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.78 5.98 33 to 35 inches 2.88 6.13 36 to 38 inches 3.08 6.38 39 to 42 inches 4.38 6.73 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 19. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.08 5.50 33 to 35 inches 3.18 5.65 36 to 38 inches 3 . 38 5 . 90 39 to 42 inches 3.68 6.25 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 19, WITH LONG PLAIN-FACE CORBELS IN PLACE OF SHORT CORBEL WITH ROSETTE. No. 20. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.10 5.44 33 to 35 inches 3 . 20 5 . 69 36 to 38 inches 3.40 5.84 39 to 42 inches 3.70 6.29 EXTRAS. Paftfrns for either size here given 1.00 Construction drawin rs with cut and formed work .45 No. 21. Width of Frame. Cut and Formed. Complete. 32 Inches and less 2.30 4.00 33 to 35 inches 2.40 4.15 36 to 38 inches 2.60 4.40 39 to 42 inches 2.90 4.75 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 22. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.30 4.00 33 to 35 inches 2.40 4.15 36 to 38 inches 2.60 4.40 39 to 42 inches 2.90 4.75 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 23. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.72 4.66 33 to 35 inches 2.82 4.81 36 to 38 inches 3.02 5.06 29 to 42 inches 3.32 5.41 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work. .50 No. 24. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.72 4.66 33 to 35 inches 2 . 82 4.81 36 to 38 inches 3.02 5.06 39 to 42 inches 3.32 5.41 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 THE KITTREDGE CORN^ICE AXD ORKAMEJxT COMPANY. 465 Scale of Cuts : inch = 1 foot. SAME AS NO . 26, OMITTING ROSETTES OX CORBELS. No. 25. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.40 4.30 33 to 35 inches 2.50 4.41 36 to 38 inches 2.70 4.70 39 to 42 inches 3.00 5.05 EXTRAS. Patterns for either size hero ,c:iven 1.00 Construction drawings with cut and formed work .45 No. 26. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.36 4.12 33 to 35 inches 2.46 4.37 36 to 38 inches 2.66 4.62 39 to 42 inches 2.96 4.97 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO . 28, WITH SHORT CORBELS. No. 27. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.28 4.18 33 to 35 inches 2.38 4.33 36 to 38 inches 2.58 4.58 39 to 42 inches 2.88 4.93 EXTRAS. Patterns for either size here given 65 Construction drawings with cut and formed work .30 No. 28. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.34 4.24 33 to 35 inches 2.44 4.39 36 to 38 inches 2.64 4.64 39 to 42 inches 2.94 4.99 EXTRAS. Patterns for either size here given 65 Construction drawings with cut and formed Avork .30 SAME AS NO. 26, WITH KEY-STONE No. 29. Width of Frame. Cut and Formed. Complete. 32 inches and loss 3.08 5.28 33 to 35 inches 3.18 5.33 36 to 38 inches 3.38 5.68 39 to 42 inches 3.68 6.03 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 30. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.28 5. .54 33 to 35 inches 3 . 38 5 . 69 36 to 38 inches 3.58 5.94 39 to 42 inches 3.88 6.29 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 28, WITH KEY-STONE AND ROSETTES ON CORBELS. No. 31. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.02 5.22 33 to 35 inches 3.12 5.37 36 to 38 inches 3.32 5.62 39 to 42 inches 8.62 5.97 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 32. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.02 5.22 33 to 35 inches 3.12 5.37 36 to 38 inches 3.32 5.62 39 to 42 inches 3.62 5.97 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 THE KITTKEDGE CORJ^ICE AND ORKAMEXT COMPAKY. Scale of Cuts : inch = 1 foot. No. 33. Width of Frame. Cut and Formed. Complete. 32 inches and less 2 . 34 3 . 10 83 to 35 inches 2.44 3.25 36 to 38 inches 2.64 3.50 39 to 42 inches 2.'J4 3.85 EXTRAS. Patterns for either size here given 65 Construction drawings without and formed worli .30 No. 34. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.66 3.66 33 to 35 inches 2.76 3.81 36 to 38 inches 2.96 4.06 39 to 42 inches 3.26 4.41 EXTRiS. Patterns for either size here given 65 Construction drawings without and formed work .30 No. 35. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.62 3.42 33 to 35 inches 2.72 3.57 36 to 38 inches 2.92 3.82 39 to 42 inches 3.22 4.17 EXTRAS. Patterns for either size here given 65 Construction drawings with cut and formed work .30 No. 36. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.80 4.10 33 to 35 inches 2.90 4.25 36 to 38 inches 3.10 4.50 39 to 42 inches 4.4) 4.85 EXTRAS. Patterns for either size here given 1 .00 Construction drawings with cut and formed work .-i") No. 37. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.62 3.54 33 to 35 inches 2.72 3.69 36 to 38 inches 2.92 8.94 39 to 42 inches 3.22 4.29 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed wu. k .45 SAME AS XO. 35, ADAPTED TO SEG]\IENT HEAD FRAME. No. 38. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.90 3.86 33 to 35 inches 3.00 4.01 36 to 38 inches 3.20 4.41 39 to 42 inches 3.50 4.61 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut aud formed work .45 No. 39. Width of Frame. Cut and Formedt Complete. 32 inches and less 3.24 4.14 33 to 35 inches 3.84 4.29 36 to 38 inches 3.54 4.54 39 to 42 inches 3.84 4.89 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 40. Width of Fram-^. Cut and Formed. Complete. 32 inches and less 4.00 5.32 33 to 35 inches 4.10 5.47 36 to 38 inches 4 . 30 5 . 77 39 to 42 inches 4.60 6.07 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 THE KITTREDGE COllXICE AND ORNAMENT COMPANY. 4G7 Scale of Cuts : inch = 1 foot. SAME AS NO. 25, adaptp:d to SQUARE HEAD FRAMES. No. 41. Width of Frame. Cut and Formed. Complete. 32 :nehes and less 2.06 4.GG 83 to 25 inches 2.76 4.81 3(Uc 38 ;:->ches : 2.9G 5.0G 39 to 42 Inciics , S.'^G 5.81 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 26, ADAPTED TO SQUARE-IIEAD FRAMES Wmi SCROLL WORK ON FRIEZE. No. 42. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.32 5.82 33 to 35 inches 8.42 5.97 3G to 38 inches 3.62 6.22 39 to 42 inches 3.92 6.57 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO . 28, ADAPTicD TO SQUARE-IIEAD FRAME, WlTH SUNK PANEL IN FRIEZE, AND ORNAMENTAL SCROLL ON TOP. No. 43. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.84 6.40 33 to 35 inches 3.94 6.55 36 to 38 inches 4.14 6.80 39 to 42 inches 4.44 7.15 EXTRAS. Patterns for either size here eriven 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 30, ADAPTED TO SQUARE-IIEAD FRAME. No. 44. Width of Frame. Cut and Formed. Complete. 32 inches and less 3. .54 5.80 33 to 35 inches 3 . 64 5 . 95 36 to 3S inches 3.84 6.20 39 to 42 inches 4.14 6.55 EXTRAS. Patterns for either size liere given 1.25 Construction drawings with cut and formed work .50 No. 45. Width of Frame. Cut and Formed. Complete. 32 inches and less 3 . 22 5 . 56 33 to 35 inches 3.32 5.71 36 to 38 inches 3.52 5.96 39 to 42 inches 3.82 6.31 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 45, WITH ORNAMENTAL SCROLL AT TOP. No. 46. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.18 6.18 33 to 35 inches 4.28 6.33 36 to 38 inches 4.48 6.58 39 to 42 inches 4.78 6.93 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 47. Width of Frame Cut and Formed. Complete. 32 inches and less 3.40 5.86 33 to 35 inches 3.50 6.01 36 to 38 inches 3.70 6.41 39 to 42 inches 4.00 6.61 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 47, DIFFERING ONLY IN DJ5TAIL OF ORNAMENTS E3I PLOYED. No. 48. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.40 5. 86 33 to 35 inches 3.50 6.01 36 to 38 inches 3.?'0 6.41 39 to 42 inches 4.00 6.61 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 408 THE KITTREDGE CORKICE AXD OR^^AMEKT COMPANY. Scale of Cuts X ii^ch ==■ one foot. No, 49. Width of Frame, Cut and Formed, Complete. 33 inches and less 3.94 5.10 33 to 35 inches 4.04 5.25 36 to 38 inches 4.24 5.50 39 to 42 inches 4.54 5.85 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No, 50, Width of Frame. Cut and Formed. Complete. 32 inches and less 3.14 5.36 33 to 35 inches 3.24 5.51 36 to 38 inches 3.44 5.76 39 to 43 inches 3,74 6.11 EXTRAS. Patterns for either size here given. 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 49, WITH LEAF OX LOWER PART OF CORBEL. No, 51. Width of Frame. Cut and Formed, Complete. 32 inches and less.,... 3.40 5.68 33 to 35 inches 3 . 50 5 . 83 36 to 38 inches 3.70 6.08 39 to 42 inches 4.00 6,43 EXTRAS, Patterns for either size here given 1.00 Construction drawings with cut and formed work ,45 SAME AS NO. 100, WITJIOUT TOP SCROLL AND ROSETTES ON CORBELS. No. 52, Width of Frame. Cut and Formed. Complete. 32 inches and less 3,34 5.64 33 to 35 inches 3,44 5.79 36 to 38 inches 3.64 6,04 39 to 42 inches 3 . 94 6 . 39 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 53. Width of Frame, Cut and Formed, Complete, 32 inches and less 3.14 4.70 33 to 35 inches 3.24 4.85 36to 38 inches 3.44 5.10 39 to 42 inches 3,74 5,45 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work ,45 SAME AS NO, 5:3, WITH LARGE LEAF ON CORBEL IX PLACE OF ROSETTE. No. 54, Width of Frajne. Cut aud Formed, Complete, 32 inches and less 3.34 4.96 33 to 35 inches 3.44 5.11 36 to 38 inches 3.64 5.36 39 to 42 inches 3,94 • 5,71 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 55. Width of Frame, Cut and Formed. Complete. 32 inches and less 3.60 5.28 33 to 35 inches 3.70 5.53 36 to 38 inches 3.90 5.68 29 to 42 inches 4 . 20 6 . 03 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut andformed work. .45 SAME AS NO. 55, DIFFERING ONLY IN DETAIL OF ORNAMENTS EMPLOYED. No. 56. Width of Frame. Cut and Formed, Complete. 32 inches and less 3.60 5.28 33 to 35 inches 3.70 5.53 36 to 38 inches 3.90 5,68 39 to 42 inches 4.20 6.03 EXTRAS. Patterns for either size here given 1.00 Construction drawings Vv'ith cut and formed work .45 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. Scale of Cuts X ii^ch = one foot. Width of Frame. 32 inches and less. 33 to 35 inches 36 to 38 inches 39 to 42 inches Complete. 4.68 4.83 5.08 5.43 EXTRAS. Patterns for either size here given 1 .00 Construction drawings with cut and formed work .45 Cut and Formed. 3.12 3.22 3.42 3.72 SAME A 8 NO. 5-; LARGE LEAF ON CORBEL IN PLACE OF ROSETTE. No. 58. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.32 4.94 33 to 35 inches 3.42 5.09 36 to 38 inches 3.62 5.34 39 to 42 inches 3.92 5.69 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 59. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.58 5.26 33 to 35 inches 3.68 5.51 36 to 38 inches 3.88 5.66 39 to 42 inches 4.18 6.01 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 59, DIFFERING ONLY IN THE DETAIL OF ORNA- MENTS USED. No. 60. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.58 5.26 33 to 35 inches 3.68 5.51 36 to 38 inches 3.88 5.66 39 to 42 inches 4.18 6.02 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 62, OMITTING ROSETTES ON CORBELS. No. 61. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.24 4.84 33 to 35 inches 3.34 5.39 36 to 38 inches 3.54 5.24 39 to 42 inches 3.84 5.59 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 62. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.50 5.16 33 to 35 inches 3.60 5.31 36 to 38 inches 3.80 5.56 39 to 42 inches 4.16 5.81 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 63. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.96 5.74 33 to 35 inches 4.06 5.89 36 to 38 inches 4.26 6.14 29 to 42 inches 4.56 6.49 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work . .45 SAME AS NO. G3, WITH LARGE LEAF ON CORBEL IN PLACE OF LEAF AND ROSETTE. No. 64. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.70 5.42 33 to 35 inches 3.80 5.57 36 to 38 inches 4.00 5.82 39 to 42 inches 4.30 6.17 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 470 THE KITTREDGE CORNICE A>^D ORKAMEIs^T COMPANY. Scale of Ctits inch == one foot. SAME AS NO. 69, SUNK PANEL IX FRIEZE. No. 65. Width of Frame. Cut and Formed. Complete. 83 inches and less 3 . 74 6 . 40 33 to 35 inches 3 . 84 6 . 55 36 to 38 inches 4.04 6.80 39 to 42 inches 4.34 7.15 EXTRAS. Patterns for either size here piven 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 71, WITH SUNK PANEL IN FRIEZE. No. 66. "Width of Frame. Cut and Formed. Complete. 32 inches and less 3.94 6.66 33 to 35 inches 4.04 6.81 36 to 38 inches 4.24 7.06 39 to 42 inches 4 . 54 7 . 41 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SA3IE AS NO. G9, WITH SUNK PANELS IX FRIEZE AND LEAVES ON CORBEL*. No. 67. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.20 6.98 33 to 35 inches 4.30 7.13 36 to 38 inches 4 . 50 7 . 38 39 to 42 inches 4.80 7.73 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 68. Width of Frame. Cut and Formed. Complete. 32 inches and less 1.9S 3.98 33 to 35 inches 2.08 4.13 36 to 38 inches 2.28 4.3S 39 to42)!iChes 2.58 4.73 EXTRAS. Patterns for either size here given 65 Construction drawings with cut and formed work .30 No. 69. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.60 5.96 33 to 35 inches 3.70 6.11 36 to 38 inches 3.90 6.36 39 to 42 inches 4 . 20 6.71 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 69, ADDING LEAF ON CORBEL. No. 70. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.06 6.54 33 to 35 inches 4.16 6.69 36 to 38 inches 4.36 6.94 39 to 42 inches 4.66 7.49 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 71. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.80 6.22 33 to 35 inches 3.90 6.37 36 to 38 inches 4.10 6.62 39 to 42 inches 4.40 6.92 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SIMILAR TO NO. 69, WITH S.UNK: PANELS IN FRIEZE, AND SQUARE SINK IN LOWER HALF OF CORBEL. No. 72. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.86 6.80 33 to 35 inches 4.96 6.95 3(Uo 38 inches.... 5.16 7.20 39 to 42 inches 5.46 7.55 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 471 Scale of Cuts : V inch = 1 foot. No. 73. . Width of Frame. Cut and Formed. Complete. 32 inches and less 3.32 5. OS 38 to 35 inches 3.32 5.23 36 to 38 inches 3.52 5.48 39 to 42 inches 3.82 5.83 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 74. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.54 5.54 33 to 35 inches 3.64 5.69 36 to 38 inches 3.84 5.94 39 to 42 inches 4.14 6.29 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 74, WITH LARGE LEAF OX CORBEL, OMITTIXG ROSETTE. No. 75. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.74 5.80 33 to 35 inches 3.84 5.95 36 to 38 inches 4.04 6.20 39 to 42 inches 4.34 6.55 EXTRAS. Patterns for either size here iriven 1.00 Construction drawings with cut and formed work .45 4 i S No. 76. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.00 6.12 33 to 35 inches 4.10 6.27 36 to 38 inches 4.30 6.52 39 to 42 inches 4.60 6.87 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO. 78, WITH LEAF ON BOTTOM PART OF CORBEL. No. 77. width of Frame. Cut and Formed. Complete. 32 inches and less 4.06 6.88 33 to 35 inches 4.16 7.03 36 to 38 inches 4.36 7. 28 39 to 42 inches 4.66 7.63 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed wwk .45 No. 78. Width of Frame. Cut and Formed. Complete. 32 inches and less 3 . 60 6 . 30 33 to 35 inches 3.70 6.45 36 to 38 inches 3.80 6.70 39 to 42 inches 4.20 7.05 EXTRAS. Patterns for either size here given 1.00 Construction draAvings with cut and formed work .45 SAME AS NO. 3, ADAPTED TO SQUARE-HEAD FRAME Wmi SCROLL WORK IN FRIEZE. No. 79. Width of Frame Cut and Formed. Complete. 32 inches and less 3.28 5.84 33 to 35 inches 3.38 5.99 36 to 38 inches 3.58 6.24 39 to 42 inches 3.88 6.59 EXTRAS. Patterns for either size here jjiven 1.00 Constmction drawings with cut and formed work .45 No. 80. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.80 6.56 33 to 35 inches 3.90 6.71 36 to 38 inches 4.10 0.96 39 to 42 inches 4.40 7.31 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 4:2 THE KITTREDGE CORi^ICE AND ORNAMENT COMPAKY. Scale of Cuts : V inch == 1 foot. SAME AS XO. 82, OMITTING ROSETTES OX CORBELS. No. 81. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.02 5.34 33 to 35 inches 3.12 5.49 36 to 38 inches 3.32 5.79 39 to 42 inches 3.62 6.09 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 82. Width of Frame. Cut and Formed . Complete. 32 inches and less 8 . 30 5 . 66 33 to 35 inches 3.40 5.81 36 to 38 inches 3.60 6.06 39 to 43 inches 3.90 6.41 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 84, OMITTING ROSETTES ON CORBELS. No. 83. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.36 5,80 33 to 35 inches 3.46 5.95 36 to 38 inches 3.66 6.20 39 to 42 inches 3.96 6.55 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 84. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.62 6,12 33 to 35 inches 3.72 6.27 36 to 38 inches 3.92 6 52 39 to 42 inches 4.22 6.87 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 Width of Frame. 32 inches and less. . 33 to 35 inches 36 to 38 inches 39 to 42 inches No. 85. Cut and Formed. 3.36 3.46 3.66 3.96 Complete. 5.76 5.91 6.16 6.51 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 86. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.56 6.02 33 to 35 inches 3.66 6.17 36 to 38 inches 3.86 6.40 39 to 42 inches 4.16 6.77 EXTRAS, Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO, 85, ADDING LEAF TO BOTTOM PART OF CORBEL. No. 87. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.82 6.34 33 to 35 inches 3.92 6.49 36 to 38 inches 4.12 6.79 39 to 42 inches 3 . 42 7 . 09 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS NO . 89, OMITTING ROSETTES ON CORBELS. No. 88. Width of Frame, Cut and Formed, Complete. 32 inches and less 3,72 6,30 33 to 35 inches 3.82 6.45 36 to 38 inches 4.02 6.70 39to42mches 4.62 7.05 EXTRAS, Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 473 Scale of Cuts : } Width of Frame. Cut and Formed. Complete. 36 to 38 iuches 4.32 7.02 39 to 42 inches 4.62 7.37 EXTRAS. Construction drawings with cut and formed work .50 4 inch = 1 foot. SAME AS NO. 89, WITH SUNK PANELS IN FRIEZE. No. 93. Width of Frame. Cut and Formed. Complete. 33 to 35 inches 4.. 36 7 36 36 to 38 inches 4.66 7 81 EXTRAS. Patterns for either size here given 1 25 Construction drawings with cut and formed work .50 SAME AS NO. 89, ADDING LEAF TO LOWER PART OP CORBEL. No. 90. Width of Frame. Cut and Formed. Complete. 36 to 38 inches 4.98 7.95 39 to 42 inches 5.48 8.55 EXTRAS. Construction drawings with cut and formed work .50 SAME AS NO. 89, WITH SUNK PANELS IN FRIEZE, AND LEAF ON KEY-STONE. No. 94. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.36 7.32 33 to 35 inches 4 . 56 7 . 62 36 to 38 inches 4.86 8.07 39 to 42 inches 5.36 8.67 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 91. Width of Frame, Cut and Formed. Complete. 32 inches and less 4.22 6.88 33 to 35 inches 4.32 7.03 36 to 38 inches 4.52 7.28 39 to 42 inches 4.82 7.63 EXTRAS. Construction drawings with cut and formed work .50 SAME AS NO. 89, SUNK PANEL IN FRIEZE, ADDING LEAVES TO BOTTOM OF CORBELS. No. 95. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.62 7.64 33 to 35 inches 4.82 7.94 36 to 38 inches 5.12 8.39 39 to 42 inches 5.62 8.99 EXTRAS. Construction drawings with cut and formed work .50 SAIviE AS NO. 89, WITH SUNK PANELS IX FRIEZE AND SQUARE SINK IN CORBEL FACES. No. 92. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.28 7.46 33 to 35 inches 4.48 7.76 36 to 38 inches 4.78 8.21 39 to 42 inches 4.28 8.81 EXTRAS. Construction drawings with cut and formed work .50 No. 96. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.44 5.74 • 36 to 38 inches 3.74 6.14 39 to 42 inches 4.04 6.49 EXTRAS. Construction drawings with cut and formed work .50 474 THE KITTREDGE CORI^ICE AND ORI^AMEKT COMPANY. Scale of Cuts : 3^ iuch = 1 foot. Complete. 6.40 6.55 6.80 7.15 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 Width of Frame. 32 inches and less. . 33 to 35 inches 36 to 38 inches 39 to 42 inches Cut and Formed. 3.74 3.84 4.04 4.34 No. 98. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.94 6.66 33 to 35 inches 4.04 6.81 36to 38inclie8 4.24 7.06 39 to 42 inches 4.54 7.41 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SAME AS XO. 97, ADDING LEAF TO BOTTOM FACE OF COEBEL. No. 99. W^idth of Frame. Cut and Formed. Complete. 32 inches and less 4.20 6.98 33 to 35 inches 4.30 7.13 30 to 38 inches 4.50 7.38 39 to 42 inches 4,30 7.73 EXTRAS. Patterns for either size hero given 1 .00 Construction drawings with cut and formed work . .45 No. 100. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.40 7.26 33 to 35 inches 4.60 7.56 36 to 38 inches 4.90 8.01 39 to 42 inches 5 .40 8 . 60 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 100, SUNK PANEL IN FRIEZE, AND LEAVES ON BOT- TOM FACE OF CORBELS. No, 101. Width of Frame. Cut and Formed. Complete. 32 inches and less 5.00 8.28 33 to 35 inches 5.20 8.58 36 to 38 inches 5.50 9.03 39 to 42 inches 6.00 9.63 EXTRAS. Patterns for either size here given. 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 109, WITH SUNK PANEL IN FRIEZE, No. 102. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.74 7.96 33 to 35 inches 4.94 8.26 36 to 38 inches 5.24 8.71 39 to 42 inches 5.74 9.31 EXTRAS. Patterns for either size here given. 1.25 Construction drawings with cut and formed work .50 No. 103. ' Width of Frame. Cut and Formed. Complete. 32 inches and less 3.68 6.30 33 to 35 inches 3.78 6.45 36 to 38 inches 3.98 6.70 39 to 42 inches 4 . 28 7 . 05 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 104. Width of Frame. Cut and Formed. 32 inches and less 4 . 00 33 to 35 inches 4,10 36 to 38 inches 4.30 39 to 42 inches 4,60 EXTRAS. Patterns for either size here given Construction drawings with cut and formed Complete. 6.76 6.91 7.16 8.51 1.25 work .50 THE KITTREDGE CORKICE A5^D ORXAMEInT COMPANY. 4:5 Scale of Cuts inch = one foot. SAME AS NO. 104, ADDING SCROLL WORK IN FRIEZE AND LEAVES TO BOT- TOM PART OF CORBELS. No. 105. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.86 8.18 33 to 35 inches 5.06 8.48 36 to 38 inches 5.36 8.93 39 to 43 inches 5.86 9.53 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 106. Widtla of Frame. Cut and Formed. Complete. 32 inches and less 4.40 7.60 33 to 35 inches 4.60 7.90 36 to 38 inches 4.90 8.35 39 to 42 inches 5.40 8.95 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 107. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.08 7.14 33 to 35 inches 4.28 7.44 36 to 38 inches 4.58 7.89 39 to 42 inches 5.08 8.49 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 108. Width of Frame, Cut and Formed. Complete. 32 inches and less 4.60 7.86 33 to 35 inches 4.80 8.16 36 to 38 inches 5.10 8.61 39 to 42 inches 5.60 9.21 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 109. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.60 7.52 33 to 35 inches 4.80 7.82 36 to 38 inches 5.10 8.27 39 to 42 inches 5.60 8.87 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 109, LEAF AND ROSETTE ON FACE OF CORBEL, WITH STAMPED SCROLL AT TOP. No. 110. Width of Frame. Cut and Formed Complete. 32 inches and less 4.86 7.84 33 to 35 inches 5.06 8.14 36 to 38 inches 5.36 8.. 59 39 to 42 inches 5.86 9.19 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 109, WITH SUNK PANELS IN FRIEZE, AND SQUARE SINK IN LOW.ER FACE OF CORBELS. No. 111. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.66 8.10 33 to 35 inches 4.86 8.40 36 to 38 inches 5.16 8.85 39 to 42 inches 5 . 66 9 . 45 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SA]ME AS NO. 109, WITH SUThK PANEL IX FRIEZE. No. 112. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.-54 7.70 33 to 35 inches 4.74 8.00 36 to 38 inches 5 . 04 8 . 45 39 to 42 inches 5.54 9.05 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 476 THE KITTEEDGE COEHICE AND OKl^AMEKT COMPAKY. Scale of Cuts : \i inch == 1 foot. SAME AS NO. 124, ADDING SCROLLS AT CORNERS OF RETURN. No. 113. "Width of Frame. Cut and Formed. Complete. 32 inches and less.... 5.30 8.00 33 to 35 inches 5.50 8.30 36 to 38 inches 5.80 8.75 39 to 43 inches 6.30 9.35 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SIMILAR TO NO. 122, WITH SCROLLS ON CORNERS OF RETURNS, OMITTING ROSETTE, AND ADDING A ^IITRED RAISE ON FACE OF CORBELS. No. 114. Width of Frame. Cut and Formed. Complete. 32 inches and less 5.24 7.98 33 to 35 inches 5.44 8.28 36 to 38 incues. 5.74 8.73 39 to 42 inches... 6.24 9.33 EXTRAS. Patterns for either size bere given 1.25 Construction drawings with cut and formed work . 50 SIMILAR TO NO, 122, WITH ACROTONIC SCROLL ON CORNERS OF RETURNS, AND SQUARE SINK IN FACE OF CORBEL. No. 115. Width of Frame. Cut and Formed. Complete. 82 inches and less 5.96 7.82 33 to 35 inches C.16 8.^2 36 to 38 inches 0.46 8.57 39 to 42 inches 6.96 9.17 EXTRAS. Patterns for either size here triven 1.25 Construction drawings with cut and formed work .50 SIMILAR TO NO. 124, WITH ACROTONIC ON CORNERS OF RETURNS AND DROP BELOW CORBEL. No. 116. Width of Frame. Cut and Formed. Complete. 32 inches and less 5.44 8.24 33 to 35 inches 5.6-1 8 . 54 36 to 3S inches 5.94 8.99 39 to 42 inches 6 . 44 9 . 59 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 117. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.60 5.52 33 to 35 inches 3.70 5.67 36 to 38 inches 3.90 5.92 39 to 42 inches 4.20 6.27 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 118. Cut and Formed. 3.92 Width of Frame. 32 inches and less 33 to 35 inches 36 to 38 inches 39 to 42 inches EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 4.02 4.22 4! 52 Complete. 4.98 5.13 5.38 5.73 SAME AS NO. 118, OMITTING ROSETTE ON CORBEL, AND ADDING LARGE LEAF. No. 119. Width of Frame Cut and Formed. Complete. 32 inches and less 4.12 6.24 33 to 35 inches 4.22 6.39 36 to 38 inches 4.32 6.61 39 to 42 inches 4.72 6.99 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 120. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.18 6.56 33 to 35 inches 4.28 6.71 36 to 38 inches 4.38 6.96 39 to 42 inches 4.78 7.31 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 THE KITTREDGE CORls^ICE Ai^D ORNAMENT COMPAJ^Y. 477 Scale of Cuts : X i^icli = 1 foot. No. 121. Widtli of Frame. Cut and Formed. Complete. 32 inches and less 4.02 6.28 33 to 35 Inches 4.12 6.43 36 to 38 inches 4.32 6.68 39 to 42 inches 4.62 7.03 EXTKAS. Patterns for either size here given l'?25 Construction drawings without and formed work .50 No. 122. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.34 6.84 33 to 35 inches 4.44 6.99 36 to 38 inches 4.64 7.24 39 to 42 inches 4.94 7.59 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 124, WITH LARGE LEAF OX CORBEL IX PLACE OE LEAF AXD ROSETTE. No. 123. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.54 7.10 33 to 35 inches 4.74 7.40 36 to 38 inches 5.04 7.85 59 to 42 inches 5 . 54 8 . 45 EXTKAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work. .50 No. 124. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.80 7.42 33 to 35 inches 5.00 7.72 36 to 38 inches 5.30 8.17 39 to 42 inches 5.80 8.07 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 59, ADDING TOP CENTER AND SIDE SCROLLS. No, 125. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.88 7.14 33 to 35 inches 5.08 7.44 36 to 38 inches 5 . 38 7 . 89 39 to 42 inches 5 . 88 8 . 49 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 59, SUBSTITUTING A MITERED RAISE ON FACE OF CORBEL, ADDING A DROP TO CORBEL, AND ADDING TOP CENTER AND SIDE ORNAMENTS. No. 126. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.82 7.12 33 to 35 inches 5.02 7.42 36 to 38 inches 5.32 7.87 39 to 42 inches 5.82 8.47 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SIMILAR TO NO. 59, SUBSTITUTING SQUARE SINK IN FACE OF COR- BEL FOR LEAF, AND ADDING CENTER AND SIDE TOP SCROLLS. No. 127. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.54 6.56 33 to 35 inches 4.64 6.71 36 to 38 inches 4.84 6.96 39 to 42 inches 5.14 7.31 EXTIiAS. Patterns for either size here given 1.25 Construction drawin^rs with cut and formed work .50 SIMILAR TO NO. 59, ADDING DROP TO CORBEL, AND ADDING TOP CENTER AND SIDE SCROLLS. No. 128. Width of Frame. Cut and Formed. Complete. 32 inches and less 5.02 7.38 33 to 35 inches 5.22 7. 68 36 to 38 inches 5.52 8.13 .39 to 42 inches 6.02 8.63 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 478 THE KITTKEDGE CORiTICE AKD ORNAMENT COMPANY. Scale of Cuts : \i inch = 1 foot. SIMILAR TO NO . 62, 03IITTIXG ROSETTES ON CORBELS, AND ADDING TOP CENTER SCROLL. No. 129. Width of Frame. Cut and Formed. Complete. 33 inches and less 4,04 6.14 33 to 35 inches 4.14 6.29 36 to 38 inches 4.34 6.54 39 to 42 inches 4.64 6.89 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 62, ADDING TOP CENTER SCROLL. No. 130. Width of T'rame. Cut and Formed . Complete. 32 inches and less 4 . 80 6 . 46 33 to 35 inches 4.40 6.61 36 to 38 inches 4.60 6.86 39 to 42 inches 4.90 7.21 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 131. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.76 7.04 33 to 35 inches 4.96 7.34 36 to 38 inches 5.26 7.79 39 to 42 inches 5.76 8.39 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 SAME AS NO. 131, SUBSTITUTING LARGE LEAF ON FACE OF CORBELS. No. 132. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.50 6.72 33 to 35 inches 4.60 6.87 36 to 38 inches 4.80 7 12 39 to 42 inches 5.10 7.47 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 133. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.06 5.16 33 to 35 inches 3.16 5 . 31 36 to 38 inches 3.36 5.56 39 to 42 inches 3.66 5.91 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 Width of Frame. 32 inches and less.. 33 to 35 inches 36 to 38 inches 39 to 42 inches No. 134. Cut and Formed. 3.48 3.58 3.78 4.08 Complete. 5.82 5.97 6.22 6.57 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 135. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.26 5.56 33 to 35 inches 3.36 5.71 36 to 38 inches 3.56 5.96 39 to 43 inches 3.86 6.31 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 136. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.94 6.54 33 to 35 inches 4.04 6.69 36 to 38 inches 4.24 6.94 39 to 43 mches 4 . 54 7 . 29 EXTRAS. Patterns for either size here given , 1.50 Construction drawings with cut and formed work .70 THE KITTREDGE CORis-ICE AXD OR^TAMEJ^T COMPANY. 479 Scale of Cuts : X inch = 1 foot. SIMILAR TO NO. 28, WITH DROP CORBEL. No. 137. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.74 4.64 33 to 35 inches 2.84 4.79 36 to 38 inches 3 . 04 5 . 04 39 to 42 inches 3 . 34 5 . 39 EXTRAS. Patterns for either size here given 65 Construction drawings with cut and formed work ,30 SIMILAR TO NO . 28, WITH DROP CORBEL AND CENTER TOP SCROLL. No. 138. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.54 5.94 33 to 35 inches 3 . 64 6 . 09 36 to 38 inches 3.84 6.44 39 to 42 inches 4.14 6.69 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 m. No. 139. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.50 4.40 33 to 35 inches 2.60 4.55 36 to 38 inches 2.80 4.80 39 to 42 inches 3.10 5.15 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SIMILAR TO NO. 28, WITH KEY, ADDING SQUARE FINISH ABOVE CAP 3I0ULD. No. 140. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.00 6.80 33 to 35 inches 4.10 6.95 36 to 38 inches 4.30 7.20 39 to 42 inches 4.60 7.55 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed w^ork .45 Width of Frame. 32 inches and less. 33 to 35 inches 36 to 38 inches 39 to 42 inches No. 141. Cut and Formed. 3.60 3.70 3.90 4.20 Complete. 5.92 5.07 6.30 6.67 EXTRAS. Patterns for either size here given i.oo Construction drawings with cut and formed' work ^45 SIMILAR TO NO . 141, OMITTING STRAIGHT TOP MOULDING. No. 142. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.58 4.44 33 to 35 inches 2.68 4!. 59 36 to 38 inches 2.88 4! 84 39 to 42 inches 3.18 5.19 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SIMILAR TO NO. 141, ADDING KEY-STONE. No. 143. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.76 6.26 33 to 35 inches 3.86 6,41 36 to 38 inches 4.06 6.66 39 to 42 inches 5.36 CO] EXTRAS. Patterns for either size here given 1.50 Construction drawings with cut and formed work . 70 RESEBIBLING NO. 141. No. 144. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.86 5.92 33 to 35 inches 3.96 6.07 36 to 38 inches 4.16 6.32 39 to 42 inches 4 . 46 6 . 67 EXTRAS. Patterns for either size here given 1.50 Construction drawings with cut and formed work .70 480 THE KITTRED&E CORKICE AKD ORNAMENT COMPANY. Scale of Cuts : % inch = 1 foot. No. 145. Width of Frame. Cut and Formed. Complete. 32 inches and less 5 . 22 8 . 68 33 to 35 inches .5.32 8.83 36 to 38 inches 5.52 9.08 39 to 42 inches 5.82 9.43 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 146. "Width of Frame. Cut and Formed. Complete. 32 inches and less 5.90 9.42 33 to 35 inches 6.10 9.72 36 to 38 inches 6.40 10.17 39 to 42 inches 6.90 10.77 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work . 50 No. 147. "Width of Frame. Cut and Formed. Complete. 32 inches and less 3.90 5.96 33 to 35 inches 4.00 6.11 36 to 38 inches 4.20 6.56 39 to 42 inches 4.50 6.71 EXTRAS. Patterns for either size here sriven. 1.50 Construction drawings with cut and formed work .70 RESEMBLING NO. 151. No. 148. "Width of Frame. Cut and Formed. Complete, 32 inches and less 5.26 8.56 33 to 35 inches 5.46 8.H6 36 to 3S inches 5.76 9.31 39 to 42 inches 6.26 9.91 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 149. "Width of Frame. Cut and Formed. Complete. 32 inches and less 3.48 5.32 33 to 35 inches 3.58 5.47 36 to 38 inches 3.88 5.72 39 to 42 inches 4.08 6.07 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 150. "Width of Frame. Cut and Formed. Complete. 32 inches and less 5.22 8.68 33 to 35 inches 5.42 8.98 36 to 38 inches 5.72 9.43 39 to 42 inches 6.22 10.03 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 151. "Width of Frame Cut and Formed. Complete. 32 inches and less 5.80 9.20 33 to 35 inches 6.00 9.50 36 to 38 inches 6.30 9.95 39 to 42 inches 6.80 10.55 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 RESEMBLING NO. 151, ADDING CENTER TOP AND SIDE ORNAMENTS. No. 152. Width of Frame. Cut and Formed. Complete. 32 inches and less 7.04 10.74 33 to 35 inches.... 7.24 11.04 36 to 38 inches 7.54 11.49 39 to 42 inches 8.04 12.09 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 THE KITTREDGE COKXICE AXD OEXAMEXT COMPANY. 481 Scale of Cuts }^ inch = one foot. No. 153. Width of Frame. Cut and Formed, Complete. 32 inches and less 3.56 5 . 82 33 to 35 inches 3.66 5.97 36 to 38 inches 3.86 6.22 39 to 42 inches 4.16 6.57 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 106. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.98 6.48 33 to 35 inches 4.08 6.63 36 to 38 inches 4 . 28. 6 . SS 39 to 42 inches , 4.58 7.23 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 155. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.28 5.34 33 to 35 inches 3.38 5.49 36 to 38 inches 3.58 5.74 39 to 42 inches 3 . 88 6 . 19 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 156. Width of Frame. Cut and Formed. 32 inches and less. 3.24 33 to 35 inches 3.34 36 to 38 inches 3.54 39 to 42 inches... 3.84 EXTRAS. Patterns for either size here given 1 Complete. 5.24 5.39 5.64 5.99 Construction drawings with cut and formed work .50 No. 157. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.80 5.98 33 to 35 inches 3.90 6.13 36 to 38 inches 4.10 6.38 39 to 42 inches 4 . 40 6 . 73 EXTRAS. Patterns for either size here given 1.50 Construction drawings with cut and formed work .70 No. 158. Width of Frame. Cut and Formed Complete. 32 inches and less 3.76 6.02 33 to 35 inches 3.86 6.17 36 to 38 inches 4.06 6.42 39 to 42 inches 4 . 36 6 . 77 EXTRAS. Patterns for either size here given 1.25 Construction drawings Avith cut and formed work .50 159, Width of Frame. Cut and Formed, 32 inches and less 4.20 33 to 35 inches 4.30 36 to 38 inches 4.50 39 to 42 inches 4.80 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 Complete. 6.56 6.71 6.96 7.31 No. 160. Width of F'rame. Cut and Formed. Complete. 32 inches and less 4.16 6.00 33 to 35 inches 4.26 6.15 36 to 38 inches.. 4.46 6.40 39 to 42 inches 4 . 76 6 . 75 EXTRAS. Patterns for either size here given. .1.00 Construction drawings with cut and formed work .45 482 THE KITTKEDGE CORNICE AND ORKAMENT COMPANY. Scale of Cuts : H inch = 1 foot. No. 161. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.76 5.36 33 to 35 inches 3 . 86 5.51 36 to 38 inches 4.06 5.rb 39 to 42 inches 4.26 6.11 EXTRAS. Patterns for either size here given .1.00 Construction drawings with cut and formed work .40 SIMILAR TO NO. 161, WITH LEAF ON FACE OF CORBEL, No. 162. Width of T'rame. Cut and Formed . Complete. 32 inches and less 3 . 88 5 . 50 33 to 35 inches 3.98 5.65 36 to 38 inches 4.18 5.90 • 39 to 42 inches 5.48 6.25 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 SIMILAR TO 153, ADAPTED TO StiVARE FRAME. No. 163. Width of Frame. Cut andFormed. Complete. 32 inches and less 3.44 5.18 33 to 35 inches 3 . 54 5 . 33 36 to 38 inches 3.74 5.58 39 to 42 inches 4.04 5.93 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed w^ork .45 SIMILAR TO NO. 165, ADAPTED TO SQUARE FRAME, WITH TOP OR- NAMENT ADDED. No. 164. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.36 5.14 33 to 35 inches 3.46 5.29 36 to 38 inches 3.65 5 54 39 to 42 inches 3.96 5.89 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 165. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.70 5.96 33 to 35 inches 3.80 6.11 36 to 38 inches 4.00 6.36 39 to 42 inches 4.30 6.71 EXTRAS. Patterns for either size here given 1.25 Construction drawinc-s with cut and formed work .50 RESEMBLING NO . 151, ADAPTED TO A SEGMENT FRAME. No. 166. Width of Frame. Cut andFormed. Complete. 32 inches and less 6.18 9.92 33 to 35 inches 6.38 10.22 36 to 38 inches. 6.68 10.67 39 to 42 inches 7.18 11.27 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 RESEMBLING NO. 151, ADAPTED TO A SEMI-CIRCULAR FRAME. No. 167. Width of Frame. Cut and Formed. Complete. 32 inches and less 6.42 10.22 33 to 35 inches 6.62 10.52 36 to 38 inches 6.92 10.97 39 to 42 inches 7.42 11.57 EXTRAS. Patterns for either size here given 1.50 Construction drawings with cut and formed work .70 RESEMBLING NO, 157, ADAPTED TO SEMI-CIRCULAR FRAME. No. 168. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.60 5.96 33 to 35 inches 3.70 6.01 36 to 38 inches 3.90 6.26 39 to 42 inches... 4.20 6.61 EXTRAS. Patterns for either size here given 1.50 Construction drawings with cut and formed work .70 THE KITTKEDGE COllKICE AKD ORiq-AMEi^T COMPAXY. 4^3 Scale of Cuts : X inch == 1 foot. RESEMBBING NO, 171, OMITTING STAMPED WORK. No. 169. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.48 4.38 33 to 35 inches 2.58 4.53 36 to 38 inches 2.78 4.78 39 to 42 inches 3.08 5.13 EXTRAS. Patterns for either size here given 1.00 Construction drawings without and formed work .45 SIMILAR TO NO. 172, OMITTING STAMPED WORK. No. 170. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.78 4.78 33 to 35 inches 2.98 4.93 36 to 38 inches 3.10 5.18 39 to 42 inches 3.40 5.53 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 171. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.52 5.72 33 to 35 inches 3.62 5.87 36 to 38 inches 3.82 6.12 39 to 42 inches 4.10 6.57 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work . .45 No. 172. Width of Frame. Cut and Formed. Complete. 32 iuches and less 3.72 6.22 33 to 35 inches 3.82 6.37 36 to 38 inches 4.02 6.62 39 to 42 inches. 4.32 6.97 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 680. Width of Frame. Cut and Formed. Complete. 32 inches and less 10.84 17.34 33 to 35 inches 11.04 17.64 36 to 38 inches 11 . 34 18 . 09 39 to 42 inches 11 . 84 18 . 69 EXTRAS. Patterns for either size here given 2.50 Construction drawings with cut and formed work 1.00 No. 681. Width of Frame. Cut and Formed. Complete. 32 inches and less 7.32 12.32 33 to 35 inches 7 . 52 12 ! 62 36 to 38 inches 7.82 13.07 39 to 42 inches 8 . 32 13 . 67 EXTRAS. Patterns for either size here given 2.50 Construction drawings with cut and formed work|l .00 No. 682. Width of Frame. Cut and Formed. Complete. 32 inches and less 7.62 11.92 33 to 35 inches 7.82 12.32 36 to 38 inches 8.12 12.77 39 to 42 inches : 8.62 13.37 EXTRAS. Patterns for either size here given 2.00 Construction drawings with cut and formed work 1.00 484 THE KITTEEDGE CORNICE AKD ORKAMEN"T COMPAI^Y. Scale of Cuts : V inch = 1 foot. No. 683. Width of Frame. Cut and Formed. Complete. 32 inches and less 7.82 12.02 33 to 35 inches 8 . 02 12 . 32 36 to 88 inches 8.32 12.77 39 to 42 inches.. 8.82 13.37 EXTRAS. Patterns for either size here given 1.50 Construction drawings with cut and formed work .70 No. 727. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.38 5.26 33 to 35 inches 3.46 5.41 36 to 38 inches 3.66 5.66 39 to 42 inches 3.96 6.01 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .50 No. 728. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.80 6.56 33 to 35 inches 4.90 6.71 36 to 38 inches 5.10 6.96 39 to 42 inches 5.40 7.31 EXTRAS. Patterns for either size here given l.QO Construction drawings with cut and formed work .45 No. 729. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.80 5.96 33 to 35 inches 3 . 90 6.11 36 to 38 inches 4.10 6.36 39 to 42 inches 4.40 6.71 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 730. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.58 5.99 33 to 35 inches 3 . 68 6 . 14 86 to 38 inches.. 3.88 6.39 39 to 42 inches 4.10 6.74 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 731. Width of Frame. . Cut and Formed. Complete. S3 inches and less 3.92 6.32 33 to 35 inches 4.02 6.47 36 to 38 inches 4.22 6.72 39 to 42 inches 4 . 50 7 . 07 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 THE KITTREDGE CORXICE AND ORNAMENT COMPANY. 485 Scale of Cuts : H inch = 1 foot. No. 732. Width of Frame. Cut and Formed. Complete. 32 inches and less 6.26 9.30 33 to 85 inches 6.46 9.60 36 to 38 inches 6.76 10.05 39 to 42 inches 7.26 10.65 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 733. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.64 7.24 33 to 35 inches 4.84 7.54 36 to 38 inches 5.14 7.99 39 to 42 inches 5.64 8.59 EXTRAS. Patterns for either size here given. , 1.25 Construction drawings with cut and formed work .50 No. 734. Width of Frame. Cut and Formed. Complete. 32 inches and less. 33 to 35 inches 36 to 38 inches 39 to 42 inches 4.24 4.34 4.54 4.84 6.74 6.89 7.14 7.49 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 735. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.78 7.38 33 to 35 inches 4.98 7.68 36 to 38 inches 5.20 8.13 39 to 42 inches 5 . 70 8 . 73 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 736. Width of Frame. Cut and Formed. Complete. 32 inches and less 4.72 7.32 33 to 35 inches 4.92 7.62 36 to 38 inches 5.22 8.07 39 to 42 inches 5 . 72 8 . 67 EXTRAS, Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 737. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.54 5.54 33 to 35 inches 3.64 5.69 36 to 38 inches 3.84 5.94 39 to 42 inches 4.14 6.29 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 48G THE KITTREDGE CORKICE Ais'D ORKAMEKT COMPANY. Scale of Cuts 3^ inch = one foot. No. 738. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.56 4.46 33 to 35 inches 2.66 4.61 36 to 38 inches 2.86 4.86 39 to 42 inches 3.16 5.21 EXTKAS. Patterns for either size here given ,1.00 Construction diawina-s with cut and formed work .45 No. 739. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.80 5. GO 33 to 35 inches 3.00 5.75 36 to 38 inches 4.10 6.00 39 to 42 inches 4.40 6.35 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 740. Width of Frame. Cut and Formed. Complete. 33 inches and less 3.30 4.20 33 to 35 inches 3.40 4.35 36 to 38 inches 3.60 4.60 39 to 42 inches 3 . 90 4 . 95 EXTRAS. Patterns for either size here given. 1.00 Construction drawings with cut and formed work .45 No. 741. Width of Frame, Cut and Formed. Complete. 32 inches and less 3.60 5.20 33 to 35 inches 3.70 5 ! 35 36 to 38 inches 3,90 5 60 39 to 42 inches 4.20 6^95 EXTRAS. Patterns for cither size here given I.OO Construction drawings with cut and formed work .45 No. 742. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.44 4.64 33 to 35 inches 3.54 4 . 79 36 to 38 inches 3 . 74 5 . 04 39 to 42 inches 4 . 04 5 . 39 EXTRAS. P.atterns for either size here given 1.00 Construction drawings with cut and formed work .45 No. 743. Width of Frame. Cut and Formed Complete. 32 inches and less 3.76 4.86 33 to 35 inches 3.86 5.01 36 to 38 inch es 4 . 06 5 ' 26 39 to 42 inches 4.36 5.(31 EXTRAS, Patterns for either size here given , 65 Construction drawings with cut and formed work .30 No. 744, Width of Frame. Cut and Formed. Complete. 32 inches and less 6.50 10.00 33 to 35 inches 6.70 10.30 36 to 38 inches 7.00 10.75 39 to 42 inches 7 . 50 11 , 35 EXTRAS, Patterns for either size here given 1.25 Construction drawings with cut and formed work ,50 No, 745, Width of Frame, Cut and Formed. Complete. 32 inches and less 3.04 4.94 33 to 35 inciies 3.14 ,5 . 09 36 to 38 inclies [ 3 ! 34 5 .34 39 to 42 inches 3 . 64 5 ," 79 EXTRAS. Patterns for either size here given 65 Construction drawings with cut and formed work ,30 THE KITTRED&E CORNICE AND ORNAMENT COMPANY. 487 Scale of Cuts : inch == 1 foot. No. 746. "Width of Frame. Cut and Formed. Complete. 82 inches and less 5.18 6.94 33 to 35 inches 5.28 7.09 36 to 38 inches 5.48 7.34 39 to 42 inches 5.78 7.79 EXTRAS. Patterns for either size here g:iven 65 Construction drawings with cut and formed work .30 No. 747. Width of Frame. Cut and Formed. Complete. 32 inches and less 7. 88 12.50 33 to 35 inches... 8.08 12.80 36 to 38 inches 8.38 13.25 39 to 42 inches 8.88 13.85 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work ..50 If— ^ No. 748. Width of Frame. Cut and Formed. Complete. 32 inches and less 8.78 12.78 33 to 35 inches 8.98 13.08 36 to 38 inches 9.28 13.53 39 to 42 inches 9.78 14.13 EXTRAS, Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No. 749, priced for opening 7 ft. high. Width of Frame. Cut and Formed. Complete. 32 inches and less 10.54 14.54 33to35 inches 10.74 14.84 36 to 38 inches 11.04 15.29 39 to 42 inches 11 . 54 15 . 89 EXTRAS. Patterns for either size here given 2.00 Construction drawings with cut and formed work 1.00 No, 750, priced for opening 7 feet high. Width of Frame. Cut and Formed. Complete. 32 inches and less. 11.28 15.78 33 to 35 inches 11.48 16.08 36 to 38 inches 11.78 16.53 39 to 42 inches 12 . 28 17 . 13 EXTRAS. Patterns for either size here given 2.00 Construction drawings with cut and formed work 1 . 00 No. 751. Width of Frame Cut and Formed. Complete. 32 inches and less 6.46 9.96 33 to 35 inches 6.66 10.26 36 to 38 inches 6.96 10.71 39 to42 inches 7.16 H 31 EXTRAS. Patterns for either size here given •,' Construction drawings with cut and formed wcrk .4o 488 THE KITTKEDGE CORNICE AXD OE^TAMENT COMPAKY. Scale of Cuts: )^ inch = 1 foot. No. 975. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.90 5.40 83 to 35 inches 4.00 5.55 36 to 38 inches 4.20 5.80 39 to 42 inches 4.50 6.15 EXTRAS. Patterns for either size here given 65 Construction drawings with cut and formed work .30 No. 976. "Width of Frame. Cut and Formed. Complete. 32 inches and less 4.00 6.00 33 to 35 inches 4.10 6.15 36 to 38 inches 4.30 6.40 39 to 42 inches 4.60 6.75 EXTRAS. Patterns for either size here given 1.25 Construction drawings with cut and formed work .50 No, 977. Width of Frame. Cut and Formed. Complete. 32 inches and less 3.44 4.94 33 to 35 inches 3.. 54 5.09 36 to 38 inches 3.74 5.34 39 to 42 inches 4.04 5.79 EXTRAS. Patterns for either size here given 65 Construction drawings with cut and formed work .30 No. 978. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.04 3.60 33 to 35 inches 2.14 8.75 36 to 38 inches 2.34 4.00 39 to 42 inches 2.64 4. 35 EXTRAS. Patterns for either size here given 1.00 Construction drawings with cut and formed work . 45 THE KITTREDGE CORI^ICE AND ORKAMEKT COMPANY. 489 WINDOW SILLS. No. 185. "Width of Frame. Cut and Formed. Complete. 32 inches and less 1.54 2.30 33 to 35 inches 1.64 2.45 36 to 38 inches 1.84 2 .70 39 to 42 inches 2.14 3.05 EXTRAS. Patterns for either size here given 60 Construction drawings with cut and formed work .25 No. 189. Width of Frame. Cut and Formed. Complete. 36 to 38 inches 2.54 3 60 EXTRAS. Patterns for either size here given 60 Construction drawings with cut and formed work .25 SIMILAR TO NO. 185, HAVING DIFFERENT PROFILE OF MOULDING. No. 186. Width of Frame. Cut and Formed. Complete. 32 inches and less 1 . 74 2 . 50 33 to 35 inches 1.84 2.65 36 to 38 inches 2.04 2.90 39 to 42 inches 2.34 3.25 EXTRAS. Construction drawings with cut and formed work .25 DIFFERS FROM NO. 189 IN PROFILE OF MOULDING ONLY. No. 190. Width of Frame. Cut and Formed. Complete. 33 to 35 inches 2 . 50 3.51 36 to 38 inches 2.70 3 76 EXTRAS. Construction drawings with cut an deformed work .25 J ^ .1 1 No. 187. Width of Frame. Cut and Formed. Complete. 33 to 35 inches 2.08 3.03 36 to 38 inches 2,28 3.28 39 to 43 inches 2.58 3.65 EXTRAS. Construction drawings without and formed work .25 1. m No. 191. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.44 3 56 33 to 35 inches 2.54 3 71 EXTRAS. Patterns for either size here given 60 Construction drawings with cut and formed work .25 DIFFERS FROM NO. 187 IN PROFILE OF MOULDING ONLY. No. 188. Width of Frame. Cut and Formed. Complete. 32 inches and less 2.14 3.04 33 to 35 inches 2.34 3.19 36 to 38 inches 2.54 3 44 39 to 42 inches 2.84 3.79 EXTRAS. Construction drawings with cut and formed work .25 SIMILAR TO NO. 187, WITH A SCROLL AT BOTTOM IN PLACE OF CORBELS. No. 192. Width of Frame. Cut and Formed. Complete. EXTRAS. Patterns for either size here given 60 Construction drawings with cut and formed work .25 490 THE KITTREDGE CORKICE AND ORi^AMEI^T COMPANY. SHEET-METAL CORNICES. Our cornices consist of galvanized-iron mouldings, with pressed zinc trimmings. Crimped iron is used in all plain surfaces, friezes, etc. A satisfactory price per running foot on cornices is hardly possible, except a multitude of variations be taken into account, such as variations in spacing of brackets, number of dentils, modillions, etc. This would necessitate such an extended price list that it has been deemed better to make prices upon parts as here given. To obtain a price per foot upon any given design, make out a list of the parts entering into it, price and extend, and divide the sum by the number of feet required. For further directions as to estimates, refer to article entitled : Example of an estimate in DETAIL. The cost of drawings and patterns is not included in the price of the parts composing the cornice. Hence these items are to be calculated for extra as per the memoranda accompanying each design. THE KITTEEDGE CORNICE AND ORNAMENT COMPANY. 491 Scale of Cuts : }£ inch 1 foot. CORNICE No. 684. TBUSS No. 697. DIMENSIONS. MOULDINGS . MITBKS EACH. FKIEZE. (Crimped.) ROOF STRIP. TRUSSES EACH. Depth. Projection. Per Lineal Foot. Cutting. Joining, Complete. Per Lineal Foot. Per Lineal Foot. Cut and Formed. Complete. 18 18 21 24 24 27 9 10 10 12 14 16 .51 52 .'^5 .60 .63 .68 .15 .15 .17 .19 .20 .21 .60 .60 .70 .80 .80 .es .75 .75 .87 .99 1.00 1 .06 .14 .14 .17 .20 .20 .22 .18 .19 .19 .22 .26 .29 2.53 3.73 2.98 3.51 3.79 4.35 3.91 4 13 4.46 5.13 5.47 6.17 Shop Drawings and Patterns for Cornice, either size 1.60 " " Truss, " 1.05 Drawings, with Cut and Formed Work, Cornice, each size 80 " " " « " Truss, " " 50 Construction Drawings 50 CORNICE No. 955. TRUSS No. 961, DIMENSIONS. MOULDINGS AND EN- RICHMENTS. MITERS EACH. FRIEZE (Crimped) . ROOF STRIP. TRUSSES EACH. Depth. Projection. Per Lineal Foot. Cutting. Joining. Complete. Per Lineal Foot. Per Lineal Foot. Cut and Formed. Complete. 18 18 21 24 24 27 9 10 10 12 14 16 1.04 1.06 1.16 1.25 1.33 1.42 •14 .14 .14 .16 .19 .21 .50 .55 .55 .65 .70 .75 .64 .69 .69 .81 .89 .96 .23 .23 .28 .31 .31 .32 .18 .19 .19 .22 .25 .29 2.25 2 43 2.98 3.51 4.25 4.89 3 5S 3.78 4.46 5 13 6 00 6.79 Shop Drawings and Patterns for Cornice, either size 1.60 a <« «< Truss, " " 1 05 Drawings with Cut and Formed Work, Cornice, either size 80 u c< u « Truss, " " 50 Construction Drawings 50 492 THE KITTREDGE CORNICE AKD ORKAMENT COMPANY. Scale of Cuts : inch = 1 foot. Biiiii ^^^^^^^^^^^^^^^ ~ CORXICE No. 956. TRUSS No. 960. DIMENSIONS. MOULDINGS. MITKRS EACH. DENTILS EACH. FRIEZE. (Crimped.) ROOF STRIP, TRUSESS EACH.. Depth. Projec- tion. Per Lineal Foot. Cutting. Joining. Comp'te. Cut and Formed. Complete. Per Lineal Foot. Per Lineal Foot. Cut and Formed. Complete. 18 18 21 24 24 27 9 10 10 12 14 10 .55 .57 .62 .68 .71 .84 .16 .16 .18 .20 .21 .25 .65 .65 .70 .80 .e5 1.02 .81 .81 .88 1.00 1.06 1.27 .08 .08 .08 .10 .10 .12 .14 .14 .14 .18 .18 .22 .10 .10 .14 .14 .14 .16 .18 .19 .19 .22 .25 .29 2.05 2.23 2.74 3.11 3.75 4.29 3.18 3.28 3.81 4.43 5.20 5.79 Shop Drawings and Patterns for Cornice, either size 1.50 " " " Truss, " " 75 Drawings, with Cut and Formed Work, Cornice, each size 75 " " " « " Truss, " " 37 Construction Drawings 50 CORNICE No. 967. TRUSS No. 962, DIMENSIONS. MOITLDINGS. MITERS EACH. DENTILS EACH. FRIEZE (Crimped). ROOF STRIP, TRUSSES EACH, Depth. Projec- tion. Per Lineal Foot. Cutting, Joining, CompHe. Cut and Formed. Complete. Per Lineal Foot. Per Lineal Foot. Cut and Formed. Complete. 18 18 21 24 24 27 14 10 .55 I .57 .62 .68 .71 .84 .16 .16 .18 .20 .21 .25 .65 .65 .70 .80 .85 1.02 .81 .81 .88 1.00 1 06 1.27 .08 .08 .08 .10 .10 .12 .14 .14 .14 .18 .18 .22 .10 .10 .14 .14 .14 .16 .18 .19 .19 .22 .25 .29 2.15 2.33 2.86 3.31 4.00 4.59 3.38 3.58 4 16 4.78 5.60 0.29 Shop Drawings and Patterns for Cornice, either size 1.50 " " " Truss, " " 90 Drawings with Cut and Formed Work, Cornice, either size 75 « " " " Truss, " »' 45 Construction Drawings 50 THE KITTREDGE CORi^ICE AND ORKAMEJ^-T COMPANY. 493 \ Scale of Cuts : }{ inch == 1 foot. CORNICE No. 958. TRUSS No. 959. DIMEKSIONS. MOULDINGS. MITBKS EACH. MODILLIONS EACH. FRIEZE. (Crimped.) ROOF STRIP. TRUSSES EACH. Depth. Projec- tion. Per Lineal Foot. jCutting. Joining. Comp'te. Cut and Formed. Complete. Per Lineal Foot. Per Lineal Foot. Cut and Formed. Complete. 18 18 21 24 24 27 9 10 10 12 14 16 •55 .57 .60 .70 .70 .79 1 .16 .18 .21 .21 .23 .65 .70 .70 . .85 .e5 .95 .81 .87 .88 1.06 1.06 1.18 .26 .28 .30 .36 .38 .46 .38 . .45 .56 .64 .68 .74 .11 .11 .16 .18 .18 .19 .18 .19 .19 .22 .25 .29 2 05 2.23 2.74 3.11 3 75 4.29 3 18 3.28 3.81 4.43 5.20 5.79 Shop Drawings and Patterns for Cornice, either size 1.90 " " " Truss, " " 75 Drawings, with Cut and Formed "Work, Cornice, each size , 95 " " " '« " Truss, " *' 37 Construction Drawings 63 504 THE KITTKEDGE CORNICE AND ORNAMENT COMPANY. 2.08 2.17 2.50 2.89 3.00 3.53 3.64 4.18 4.30 H •peuijoj t- 1-1 CO c- in ■CO (?* CO CO ■ ^ IQ T-l (M CM •poaiJOj[ pa's :;nr) CO CO CO CO O TH CO 00 CO i-H CM C5 O CM CO* C5 <=> T-( T-l tH CM CM £- i:- t- (M CM (?t C5 T-< i-I CM ;C CM GO •pauuoj puB %no •paraaoj puB ^tno •9!}aiduioo •Sniuiof •?ooj ^ T-l tH r-t 5^ CO O CM CO uot^joafojj ^ S 2 § ff* CO CO CO O TH T-l 44 CO 7 B CO 510 1^ 00 - o b ►1 =1 ^ ^ P i' o ! & 2. S S 2 Depth. Project'n. Per Lineal Foot. is Cutting. Joining. Complete. VX or OS *i B ^ ^ O) CO OD 05 C ut and Formed. Complete. s s § Cut and Formed. aw Complete. Cut and Formed. to )->■ Complete. o 05 CO }0 Cut and Formed. Complete. Cut and Formed. CO 05 05 bs »o ^s Cut and o o o GO CO rf^ Formed. lO O) 00 iO to ^ g g 05 05 00 k 05 CO iO O) C: CJT OS or CO 00 05 2 g " o «> Cut and Formed. Complete. o S o «5 00 o o o bS 05 05 24.11 22.81 21 .52 20.25 19.63 18.38 14.78 Cut and Formed. Complete. p c O CO 1^ CO c-3 CO CO o IS Depth. CO ^^ o CO 'S if Hi o 00 S5 Projection. 512 THE KITTREDGE COlliq^ICE AKD ORi^AMENT COMPANY. THE KITTREDGE CORKICE AND OIlIS"AMEN^T COMPAKY. 517 9:j9ldraoo s s § (ft T-l »f5 00 T-H i-I S 05 o a 5" puB 'jn3 53 S o ^ ^ S t- t- i:- CO th O T-( tH CO tjJ ^, ^, B T-i CO ■r-i ai T-l T-H L- i-- ■r-l O T-H C>J t- <3i 00 GO cr. 05 t- t- aj GO a^aiduioo ;^ ^2 S S •potu.io^ puT? mo a CO •9j9iduiool •3muiof JO in in •looj 2 S i2 IBguiqaaj ^ ^ ^ ^ ^ ^ ^ n.^ooCoaj |i ^ •md9(i (?? ci in 00 tt) o I ^ g g o o OS 518 THE KITTREDGE CORKICE AisD ORKAMENT COMPANY. THE KITTREDGE CORiq-ICE AKD ORJiTAMEKT COMPA^^Y. 519 puB 'iXlO 2 • O G £3 5" a()9l o I- 10 >o ^ O H an CO ^ ci 520 THE KITTREDGE CORKICE A^TD ORKAMENT COMPANY. The diversity of shapes and constructions required in wrought iron lookouts prevents a price list. We are prepared to make any and all kinds, and estimates will be furnished upon application. THE KITTEEDGE COiRKICE AKD OKiq"AMElirT COMPAi^Y. 521 DORMER WINDOWS. In construction and design Dormer Window Trimmings are readily adapted to the particular position in which they are to be placed, which renders catalogue designs and price lists of less importance than otherwise. The few designs presented herewith represent work, as constructed for various public and private buildings, by this Company, during the past few years, selected at random from several hundred contracts. We are always ready to figure upon special designs, and to submit designs for special constructions. Scale of Cuts : }£ inch = 1 foot. No. 939. 48 X 32 in. opening, each, Cut and Formed, (including roof) 24.00 48x32 in. " Complete, " ' 32.00 Other sizes at proportionate rates. Shop Drawings and Patterns ■ 4.00 Drawings with Cut and Formed Work o 1.25 522 THE KITTREDGE COENICE Ai^D ORN'AMEiq'T COMPAISrY. Scale of Cuts : }i inch = 1 foot. No, 940, 7Z X 33 in. opening, each, Cut and Formed, (roofs not included) 20.50 72x 33 in. " Complete, " " 27.50 Other sizes at proportionate rates. Shop Drawings and Patterns 3.00 Drawings with Cut and Formed Work 1.00 80.00 38.50 Other sizes at proportionate rates. Shop Drawings and Patterns Drawings with Cut and Formed Work. . . . THE KITTKEDGE CORiq^ICE AND ORKAMEIsT COMPANY. 523 Scale of Cuts : X i^^ch — 1 foot. No. 942, 72 X 32 in. opening, each, Cut and Formed, (roofs not included) 22. CO 72x32 in. " " Complete, " 29.50 Other sizes at proportionate rates. Shop Drawings and Patterns , » 3 . 50 Drawings with Cut and Formed Work 1.00 No 943. 66 X 29 in. opening, each. Cut and Formed, (roofs not included) 20.00 66x 29 in. " Complete, " " ** 26.00 Other sizes at proportionate rates. Shop Drawings and tatterns 3.00 Drawings with Cut and Formed Work 1.00 524 THE KITTREDGE COEXICE AKD ORKAMENT COMPAXY. Scale of Cuts : X i^^ch = 1 foot. No. 944, 88 X 44 in. opening, each, Cut and Formed , 45.00 88x44 in. " Complete . 54.50 Other sizes at proportionate rates. Shop Drawings and Patterns 5.0G Drawings with Cut and Formed Work ] ,53 No, 945. 78 X 39 in. opening, each. Cut and Formed, (roofs not included) 42.00 78x 39 in. " " Complete, " " " 51.50 Other sizes at proportionate rates. Shop Drawings and Patterns , , 6.00 Drawings with Cut and Formed Work 1,50 - ! 1 THE KITTREDGE COR^^ICE AXD ORNAMENT COMPANY. 525 CHIMNEY CAPS. The sizes of Chimney Caps here presented are, it is believed, sufficiently comprehensive for all practical purposes. Dimensions taken are on the line of brick work. Intermediate and other special sizes to order at proportionate rates. No. 968. Scale— >^ inch = 1 foot. No. 966. Scale— 3^ inch = 1 foot. Length. 18 in. 22 in. 27 :a. 31 in. 36 in. 40 in. 45 In. Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed , Complete Cut and Formed. Complete Cut and Formed. Complete 49 in. 53 in. 67 in. Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete 6.53 9.60 7.05 10.10 7.61 10. T2 8.06 11.22 8.63 11.84 9.08 12.34 9 64 12.95 10 09 13.44 11.12 14.57 12.13 15.68 22 in 7.52 10.62 8.08 11.24 8 61 11.82 9.10 12.36 9.55 12.85 10. 11 13.46 10. 56 13 95 11.58 15.07 12.60 16.19 7 in . 31 in 8.67 11.88 9.12 12.38 9.63 12.99 10.13 13.48 10.60 13.99 10.71 14.12 11.16 14.61 12.17 15.72 13.18 16.83 ,59 12. 10.15 13.50 11.18 14.63 11.62 15.11 12.64 16.23 13.66 17.35 Length. 18 in. 22 in. 27 in. 31 in. WIDTH. Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed . Complete 36 in. 40 in. 45 in. 49 in. 58 in. 67 in. Cut and Formed . Complete Cut and Formed . Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed Complete Cut and Foi-med . Complete 18 in 9.72 13.73 10.24 14.29 11.13 15.24 11.77 15.93 12.55 16.76 13.18 17.44 13.96 18.27 14.59 18.94 15 83 20.33 17.41 1.96 22 in 11.00 15.10 11.79 15.95 12.57 16.78 13.20 17.46 13.82 18.12 14.61 18.96 15.24 19.63 16.58 21.07 18.06 22.05 27 in. 31 in 12.59 16.80 13.22 17.48 14.00 18.31 14.63 18.98 15.41 19.82 15.92 C.37 17.45 22.00 18.85 23.50 13.86 18.16 14.65 19.00 15.28 19.67 15.94 20.39 16.62 21.11 18.10 22.69 19.50 24.19 Shop-Drawings and Patterns, either size 1.50 j Shop-Drawings and Patterns, either size 1.50 Drawings with Cut and Formed Work, either size. .50 | Drawings with Cut and Formed Work, eithw size. .50 526 THE KITTREDGE CORNICE AKD ORITAMEI^T COMPANY. No. 964. No. 965. Scale— 1^ inch =1 fcot. Scale— K inch = 1 foot. Loagth. WIDTH. 18in. 22 in. 27 in. 31 in. Leag'.h. WIDTH. 18 in. 22 in. 27 in. 31 in. 18 ia. 14.51 23.15 18 in. Cut and Formed 9.49 14.42 Complete 22 ia. 15 12 22.85 15.91 23.78 22 in. 10.03 15.00 10.56 15.58 Complete 27 in. 16.41 24.57 17.14 5.39 18.88 27.07 27 in. 10.71 15.74 11.28 16.36 11.98 17.11 Complete 31 in. 17 12 25.37 17 84 26.18 19.07 27.86 19.80 28.68 31 in. Cut and Formed 11.26 16.34 11.82 16.94 12.52 17.70 13.09 18.31 Complete Complete . 36 in. Cut and Formed 18.34 27.03 19. 05 27.84 20.34 29.57 21.01 30.32 36 in. Cut and Formed 11.94 17.07 12.50 17.68 13. 21 18.44 13.78 19.05 Complete 40 ia. Cut and Formed 19.03 27.82 19.76 28.64 20.99 30.31 21.56 31.06 40 in. 12.48 17.06 13.05 18.27 13.76 19.03 14.31 19.62 Complete 45 in. Cut and Formed. 20 30 •;0 53 20. 97 30.28 22.09 31.83 22.81 .32.65 45 in. Cut and Formed 13.17 18.40 13.74 19.01 14.45 19.78 15.01 20.38 Complete 49 in. Cut and Formed 20 95 30.27 21.62 31.02 22.79 32.63 23.59 .33.51 49 in. Cut and Formed 18.72 18.99 14.27 19.58 14.99 20.36 15.55 20.96 Complete 53 in. Cut and Formed 22.75 32 69 23.55 33.47 24.85 35.21 25.51 35.96 58 in. Cut and Formed 14 95 20.32 15.51 20.92 16.21 21.68 16.78 22.29 Complete Complete 67 in. Cut and Formed Complete 24.81 35 17 25.47 35.92 26.72 37.50 27.44 38.31 67 in. Cut and Formed Complete 16.17 21. G4 16.74 22.25 17.48 3 05 18.01 24.62 Shop-Drawings and Patterns, either size 2.50 ! Shop-Drawings and PatternSj either size 2.00 Drawings with Cut and Formed Work, either size. .75 | Drawings with Cut and Formed Work, either size. .60 THE KITTREDGE COlimCE AXD ORKAMENT COMPAJ^Y. 527 No. 067. Scale— >^ inch = 1 foot. DESCRIPTION. CORWX MOULD & CAP. NECK MOULD . Leag'.h. WIDTH. 18 in. 22 in. 27 in. 31 in. 18in. 22 in. 27 in. 31 in. 18 in. Cut and Formed 10.96 15.96 1.91 2.91 22 in. 11.51 16.66 12 15 17.33 2.06 3.06 2.20 3.20 27 in. 12. 2S 17.59 12.85 18.27 13.65 19.05 2.24 3.24 2.39 3.39 2.57 3.57 31 in. Cut and Formed 12.80 18.27 13.43 18.95 14.22 19.78 14.84 20.45 2.39 3.39 2 53 3.53 2.71 3.71 2.86 3.86 Complete 36 in. 13.50 D.15 14.14 19.84 14.93 20.67 15.55 21.34 2.57 3.57 2.71 3.71 2.89 3.89 3.04 4.04 40 in. 14.07 19.88 14.69 20.55 15.48 21 .38 16.12 22.07 2.71 3.71 2.86 3.86 3.04 4.04 3.18 4.18 45 in. 14.78 20.78 15.40 21.45 16.20 •22.29 16.83 22.96 2.89 3.89 3.04 4.04 3.22 4.22 3.39 4.39 49 in. 15.33 •21 .48 15.97 22.17 16.76 23.00 17.39 23.57 3.04 4.04 3.18 4.18 8.39 4.39 3. CI 4.51 C8in. IG Gl Il7.21 18.03 24.60 18.67 25.30 3.39 4.39 3.51 4.51 3.70 4.70 3.84 4.84 23.75 67 in. 17.83 13.52 19.31 •:6 22 19.92 26.89 3.70 4 70 3.84 4.84- 4.02 5.02 Tl7 5.17 Shop- Drawings and Patterns, either size Drawings with Cut and Formed Work, either size. 2 50 .75 528 THE KITTREDGE CORKICE AKD ORi^AMEKT COMPAKY. No. 963. SCALE- incli = 1 foot. DESCRIPTION. Length, 18 in. Cut and Formed. Complete 22 in. Cut and Formed. Complete 27 in. Cut and Formed. Complete 31 in. Cut and Formed. Complete 35 -.n. 40 in. 45 in. 49 in. 58 in. 67 in. Cut and Formed. Complete Cut and Formed. Complete Cut and Formed . Complete Cut and Formed. Complete Cut and Formed. Complete Cut and Formed. Complete WIDTH. CROWN MOULD & CAP. 18 in 6.22 9.03 6.66 9 51 7.20 10.11 7.65 10.61 8 20 11.21 8 64 11.70 .18 9 62 12.77 10 61 13.86 22 in. 11.60 12. 14 95 15 27 in . 31 in 8.24 11.25 8.57 11.72 9.14 12.24 22 12.33 9 55 2.80 10.22 13.43 10.55 13.90 11.54 14.99 12.62 16 07 9.67 12.82 10.12 13.31 10.67 13.92 11 11 14.40 12.10 15.49 13,09 16.58 NECK MOULD. 18in 1.57 2.37 1.69 2.49 1.85 2 65 1.98 2.78 2 13 2.93 2.26 3.06 2 41 3 21 10 3 90 1.82 2.62 1.98 2.78 2 10 2.90 2.25 3.06 2.38 3.18 2.54 3.34 2. 66 3.46 2.94 3.74 3.22 4.02 27 in 2.13 2.93 2.26 3.06 2. 41 3.21 2.54 3.34 2.69 3.49 2.82 3.62 3.10 3.90 3.38 4.18 31 in. 2.38 3.18 2.54 3.34 2.68 3.46 2.82 3.62 2.94 3.74 3 22 4.02 3.50 4 . 30 Shop-Drawings and Patterns, e'ther size Drawings with Cut and Formed Work, either size . 1.75 .50 THE KITTKEDGE CORXICE AND ORiq-AMENT COMPANY. 529 No. 979. Scale— >^ inch = 1 foot. Length. 18 in. WIDTH. 18 in .2 in. 27 in. 31 in. 20.54 35.74 22 in. 21.18 .36.48 21 83 37.23 Complete 27 in. 21.99 }7.39 22.65 38.15 23.46 39.06 31 in. 22.65 38.15 23.29 38.89 24.11 39.81 24.76 40.56 36 in. 23.46 39.06 24.11 39.81 24.92 40.72 25.57 41.47 40 in. 24 11 39.81 24.76 40.56 25.57 41.47 25.21 42.21 45 in. 24.92 40.72 25.57 41.47 26.39 42.39 27.01 43.11 49 in. 27.07 43.97 27.71 44.71 28.51 45.61 29.19 46.39 S8in. 28 51 45.61 29.19 46.39 30.00 47.30 30.63 48.03 67 in. 30. 00 30.63 31.45 18.95 32.00 40.60 Shop- Drawings and Patterns, either size 3,00 Drawings with Cut and Formed "Work, either size 1 .00 530 THE KITTEEDGE COKNICE AND ORl^AMENT COMPAKY. SHEET-METAL SIGN LETTERS. We present designs for nine different styles of Sheet-Metal Sign Letters, with prices for various sizes. Special designs and sizes made to order at any time at rates corresponding with those here presented, with an additional charge for Patterns. The smaller signs are made from sheet zinc, while the larger sizes are made of galvanized iron. Scale of Cuts : 1 inch = 1 foot. No 907, G in. 8 in. 10 in. 12 io. Out and Formed Complete .17 Cut and Formed 25 Complete 44 Cut and Formed 36 Complete 57 Cut and Formed. Complete .47 .69 14 in. IC in. Cut and Formed 56 Complete 81 18 in. 20 in. 22 in. Cut and Formed 75 Complete 1 .02 Cut and Formed ^ 86 Complete. 1 .16 Cut and Formed 97 Complete 1.30 Cut and Formed 1.09 Complete 1.44 Cut and Formed 1.20 Complete 1-58 THE KITTREDGE CORKICE AND ORNAMENT COMPANY. 531 Scale of Cuts : 1 inch = 1 foot. No. 910. 6 in. 10 in. 12 in. Cut and Formed 33 Complete C9 Cut and Formed 42 Complete 80 Cut and Formed 51 Complete 5)2 Cut and Formed 60 Complete 1 .03 Cut and Formed * 69 Complete 1 14 14 in. 18 ia. 20 in. 22 in. Cut and Foi-med 85 Complete 1.33 Cut and Formed 99 Complete 1 46 Cut and Formed 1 06 Complete l .59 Cut and Formed 1.16 Complete 1.71 Cut and Formed 1,26 Complete 1 .84 No, 911. 4 in. 6 in. 10 in. 12 in. Cut and Formed 38 Complete 74 Cut and Formed 47 Complete 86 Cut and Formed 59 Complete l.CO Cut and Formed 70 Complete 1.13 Cut and Formed 81 Complete 1.27 14 in. 16 in. 16 in. 2J in. Cut and Formed 101 Complete 1.49 Cut and Formed 1.13 Complete. . 1 63 Cut and Formed 1.25 Complete 1 TO Cut and Formed 1.88 Complete 1-94 Cut and Formed 1.51 Complete 2.08 532 THE KITTKEDGE CORKICE AND ORNAMENT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 912, Cut and Foraied 18 Cut and Formed 86 4 in. Comulete 4'J 14 in. Comnlete 1 C\/l 30 Cut and Formed 99 0 in. Comnlp.tft .^n 10 ir.. Complete 1 41 Cut and Formed 41 Cut and Formed 1.13 8 in. Comnlfttf! 70 ■ 18 ia. Comnlete 1 .58 Cut and Formed 53 Cut and Formed 1.27 10 in. Complete 85 20 in. Complete 1.T5 64 Gat and Formed 1.40 1^ m. Complete 1 00 22 in. Complete 1.91 Nor 913 . Cut and Formed 24 Cut and Formed 90 4 in. Comi^lete 52 14 in. Complete 1.29 Cut and Formed 35 1.03 : 6 in. Complete 66 10 in. 1.44 47 1.16 8 in. Complete 79 18 in. 1.59 Cut and Formed 58 1.29 10 in. Complete 93 20 ia. 1.74 69 1.42 12 in. r^nmnlfttp. 1 or. 22 in. 1.90 THE KITTREDGE CORNICE AXD ORNAMENT COMPANY. 533 Scale of Cuts : 1 inch = 1 foot. No 907. 4 in, 6 in. Cut and Formed Complete Cut and Formed 30 Complete 52 10 in. 12 in. Cut and Formed il Complete 65 Cut and Formed 52 Complete 79 Cut and Formed 63 Complete 92 14 in. 16 in. 18 in. 20 in. in. Cut and Formed 84 Complete 1 .15 Cut and Formed 97 Complete. 1 .30 Cut and Formed 1.09 Complete 146 Cub and Formed 1.22 Complete 1.61 Cut and Formed 1.35 Complete. 1 .76 No. 908. 4 in. 6 in. 8 in. 10 in. 12 in. Cut and ForJied 23 Complete r>l Cut and Formed 31 Complete 62 Cut and Formed 39 Complete 72 Cut and Formed 47 Complete 82 Cut and Formed 55 Complete 92 14 in. 16 i . 18 in. 22 in. Cut and Formed 70 Complete 1 09 Cut and Formed 79 CDmplete 1 20 Cut and Formed 88 Complete 1-32 Cut and Formed 98 Complete 1-43 Cat and Formed 1 07 Complete •/ ^-^^ 534 THE KITTKEDGE CORNICE AND ORNAMEKT COMPANY. Scale of Cuts : 1 inch = 1 foot. No. 905. 4 in. 8 in. 10 in. Cut and Formed 18 Complete 33 Cut and Formed 23 Complete 4G Cut and Formed 39 Complete 59 Cut and Formed 50 Complete 73 Cut and Formed 61 Complete 86 14 in. 16 in. 18 in. 20 in. 22 in. Cut and Formed 82 Complete 1.09 Cut and Formed 95 Complete 1.25 Cut and Formed 1.07 Complete 1.40 Cut and Formed 1.20 Complete 1 .55 Cut and Formed 1.33 Complete 1 .7>) Cut and Formed 17 Cut and Formed 75 4 in. Complete 38 . 14 in. Complete 1.12 Cut and Formed 27 Cut and Formed 87 6 in. 16 i' . Complete 1 27 Cut and Formed 37 Cut and Formed 1 00 8 in. Complete 64 18 in. 1.41 Cut and Formed 47 1.11 10 in. Complete 7T 20 in. 1.56 Cut and Formed 57 1.22 12 in. on 22 in. 1.71 THE KITTREDGE CORiq^ICE AKD OR^vTAMEXT COMPAKY. 535 CURVED MOULDINGS.' The great number of variations in curved mouldings renders a price list next to impossible. In lieu thereof we hold ourselves ready to make estimates and bids upon any work required, whether large or small. A peculiarity of the special machinery operated by us upon this class of work is, its adapta- bility to any required pattern, and to all necessary sweeps and curves. We are prepared to make upon short notice, to any sweep, any required profile, excepting only, very intricate and unusual forms. Our work is sharp and distinct in profile, true to stay, and is in every way superior to rolled mouldings as commonly used. We give every advantage of flanges for omitted joints, and con- struct in fewer sections than commonly employed. Correspondence with drawings for estimates solicited. We annex a list of Curved Mouldings, limited to patterns of ordinary forms and sweeps, re- serving the right to vary from it as circumstances may require. PRICE LIST CURVED MOULDmGS. Crown Moulding, ordinary patterns. Planceer cut to curve. Bed Moulding. Arched Planceer and Bed Moulding joined. Modillion Course. Dentil Course, Foot Mouldings. Girt. 5 Inches. n 7 8 .( 9 i( 10 <( 11 (( 13 (( 13 14 15 16 17 (( 18 19 t( 20 21 <( 22 23 <( 24 (( 25 26 (> 27 28 (( 29 it 30 (( Price per Ft. .25 .60 .28 .60 .31 .60 .34 .60 .37 .60 .40 .60 .43 .80 .46 .49 .80 .80 .52 .80 .55 .80 .58 1.00 .61 1.00 .64 1 .00 .67 1.00 .70 1.00 .73 1.20 .76 1.20 .79 1.20 .82 1.20 .85 1.20 .88 1.40 .91 1 40 .94 1 40 .97 1 .40 1.00 1.40 .15 .18 .15 .18 .19 .23 .19 .23 .25 .30 .25 .30 .31 .37 .31 .37 .37 .44 .37 .44 .38 .46 .38 .46 .44 .55 .44 .53 .50 .eo .50 .60 .57 .69 .57 .69 .64 .78 .64 .78 .71 .87 .71 .87 .73 .91 .78 .96 .80 1.00 .80 1.00 536 THE KITTREDGE COKNICE AND ORNAMENT COMPANY. GALVANIZED IRON PIPE, FOR CONDUCTORS, &c. SO-Ii^CH EIVETTED AND SOLDERED SECTIONS. ROUND PIPE. SHIPPED IN EIGHT TO TWELVE FOOT LENGTHS. No. 27. No. 26. No. 24. No. 22. .15 .17 4 " .20 .22 .24 5 .25 .27 .30 6 .30 .33 .36 .45 7 " .40 .43 .53 8 " .45 .48 .58 Shoes and Elbows Extra. T SHANK CONDUCTOR HOOKS BLACK. 2 inch 5 . 90 per hundred. 3 " 7.90 " 4 11.90 " 5 15.90 " 6 " 19.80 " TINNED. 2 inch 6.25 per hundred. 3 " 8.33 " 4 " 12.50 " 5 " 16.66 " 6 20.80 " THE KITTREDGE CORNICE AKD ORNAMENT COMPANY. 537 PATENT RIBBED TUBING. FOR CONDUCTOR-PIPES, POSTS, RAILINGS, ETC, ONE LONGITUDINAL GROOVED JOINT. IN SEVEN-FOOT LENGTHS. GALVANIZED. 1% inclies (outside diameter) 16 per foot. 2 18 2^4 " " " 20 " 3 " " « 22 3X " " " 24 " 4 " " 26 5 " " 30 6 " " 35 ! 538 THE KITTEEDGE COENICE AND ORNAMENT COMPANY. PRICE LIST OF THE PATENT CORRUGATED EXPANDING WATER CONDUCTOR OR "LEADER.' REGULAR SIZES. 3 Inch Galvanized Iron Conductor 15 cents per foot. 4 (c u (( le ... 20 " 5 « <« '< 25 " " 6 " " " " 30 " " ELBOWS AND SHOES /kii! 2 mi 3. SIZES. NO. 1 — PER DOZEN. NO. 2 — PER DOZEN. NO. 3 — PER DOZEN. 3 Inch. 3.50 4.00 4.50 4 4.50 5.00 5.50 5 " 5.50 6.00 6.50 6 " 6.00 6.50 7.00 In ordering Elbows and Shoes, please state the angles required, as numbered in the annexed cuts. Special sizes manufactured to order, of Tin, Galvanized Iron, Copper and all Sheet Metals. THE KITTREDGE CORKICE AND ORI^"AMENT COMPANY. 539 AUSTIN'S CONDUCTOR FASTENING. Especial attention is called to this Fastening, as the best method of attaching Conductors to the walls of Buildings, to prevent dampness. The process of using this Fastening is described as follows : The Section No. 1 is soldered to the Conductor. The Shank No. 2 is driven in the wall, with the outer end inserted into the Socket of No. 1, then by dropping the Pin No. 3 into the hole which is in the center of Nos. 1 and 2, when attached, the Conductor is firmly secure, and no joint can become detached without first removing the Pin. Prices of Fastenings 10 cents per Set. I One Hundred Sets 20 percent, off. Fifty Sets 10 per cent. off. | Five Hundred Sets and over 30 per cent. off. FLAT CRIMPED ELBOWS SIZE. UNTINNED. EETINNED. GALVANIZED. 2 inch. .12 .15 .15 each. 2>^ .. .17 .19 .19 .. 3 .19 .21 .21 .. 3>^ .. .21 .23 .23 .. 4 .25 .27 .27 .. 4>^ .27 .29 .29 .. 5 .33 .38 .38 .. 5K .. .46 .50 .50 .. 6 .54 .58 .58 .. 7 .67 .71 .71 .. 8 .92 1.08 1.08 .. Liberal discount on quantities. 540 THE KITTKEDGE CORNICE AXD ORKAMEJ^T COMPANY. SPEAKING TUBES. IN SEVEN FOOT LENGTHS. IKTERNAL DIAMETER. X INCH. % INCH. 1 INCH, \% INCH. .09 .09 .10 .35 BUTTON-HEADED BOLTS, FOR SHEET IRON WORK, WITH LIGHT WROUGHT IRON CONSTRUCTION. X X X ii^ch 1 .41 per hundred. %x3^ " 1.41 " Mx 1^ 1.41 " Xx>^ " 1.41 1 xX " 1-50 " Other sizes proportionate rates. ROOFING NAILS. ^ Inch, Black, per keg, 100 lbs $7.50 X8 1 IK Tinned, 7.25 7.00 7.00 6.75 10.00 9.75 9.50 1% Inch, Tinned, per keg, 100 lbs |9.50 % % 1 IK Small lots two cents per pound advance on above. Net cash prices, subject to change of market without notice. Galvanized 9.25 10.00 9.75 9.50 9.50 9.25 THE KITTRED&E CORNICE AIs^D ORNxVMEjq-T COMPANY. 541 LIGHT SHEET-IRON DOORS AND SHUTTERS. As supplying a want long felt, in buildings of the better class, whether entirely or partially fire-proof, our improved light sheet-iron door and shutter is confidently offered to the public. The construction of the shutters is such that the greatest strength with a minimum of weight is obtained. There is no wood involved. The shutter is hollow throughout — a dead air cham- ber, — affording the greatest resistance to fire and heat. In appearance it is neat and tasteful, avoiding all of the objectionable features pertaining to the corrugated and other fire proof shut- ters in common use. "We make them of both black and galvanized iron, of gauges from No. 27 to No. 22, according to requirements. By the use of stamped zinc trimmings a very elaborate pat- tern can be gotten up at very reasonable cost. These shutters are also well adapted to inside work, and are already in use in several court-houses, hotels, and other public buildings. The weight of the shutter is about the same as of wood, of same shape and size. On large sizes it is considerably less. Our improved doors are calculated to take the place of the ordinary wood door in general use. By our special construction we present a fire-proof article, which in its design and general appearance cannot be distinguished from an ordinary wood door. We also make a door adapted to use for entrances to public buildings, fire-proof in its general features, yet by the use of stamped zinc trimmings more elaborate than is ordinarily produced in wood, and at the same time very much cheaper. Architects and builders are invited to correspond, concerning diagrams of construction, designs and prices. A comprehensive price list at this time has been deemed inexpedient, as the adaptability of the construction and design is such as to admit of numerous variations, and hence we prefer special estimates in each case. 542 THE KITTKEDGE CORNICE AND ORNAMENT COMPANY. NUMBERS AND WEIGHT OF SHEET ZINC. THICKNESS. WEIGHT IN POUNDS. NUMBER. INCHES. SQUARE FOOT. SHEET— 36x84 INCHKS. 1 0.0039 0.1413 21 .98 5 0.0113 0.4117 8.64 6 0.0i32 0.4792 11.06 7 0 0150 0.54(i8 11.48 8 0.0169 0.6144 12.90 9 0.0187 0.6820 14.32 10 0.0224 0.8172 17.16 11 0.0201 0.9534 20.00 12 0.02!)8 1.0875 22.84 13. 0.0336 1.22-27 25.68 14 ... 0.0373 1.3579 28.52 15 0.0410 1 .4930 31.36 16 0.0447 1 .6282 34.19 17 0.0521 1 .8986 39.87 18 0.05% 2.1659 45.55 19 0.0670 2.4393 51.23 20 0.0744 2.7096 56.90 21 0.0818 2.9800 62.58 22 0 .0892 3 . 25' 3 68.20 23 0.09C6 3.52C7 73.90 24 0 .1040 3.7910 79.64 25 , 0.1114 4.0614 85.29 26 0.1189 4.3317 90.97 Weight of a Square Foot of Cast and Wrought Iron, Copper^ Lead, Brass and Zinc. FROM j\ TO 1 INCH IN THICKNESS. THICKNESS. CAST IRON. WROUGHT IRON. COPPER. LEAD. BRASS. ZINC. Inch. Lbs. Lbs. Lbs. Lbs, Lbs. Lbs. 1-16 2.346 2.fn 2.89 3 691 2 675 2.34 1-8 4.693 5.035 - 5.781 7.382 5. 35 4.68 3-16 7.039 7.552 8.672 11 .074 8.025 7.02 1-4 9.386 10.07 11.562 14.765 10.7 9.36 5-16 11.733 12.588 14.453 18.456 13.375 11.7 3-8 14.079 15.106 17.344 22.148 16.05 14.04 7-16 16.426 17.623 20.234 25.839 18.725 16.34 1-2 18.773 20.141 23.125 29.53 21.4 18.73 9 16 21.119 22.659 26.016 33.222 24.075 5-8 23.466 25.176 28.906 3rt .9 3 26.75 11-16 25.812 27.694 31.797 40.604 29.425 3-4 28.159 31. 211 34 688 44.296 32.1 13 16 30.505 32.72ii 37.578 47.987 7-8 32.8-2 3.). 247 40.469 51 .678 15-16 35 199 37.764 43.359 55.:^7 1 37.545 40.282 46.25 59.061 Note. .—The wrought iron and the copper is that of hard rolled plates. THE KITTRED&E CORiTICE AXD ORKAMENT COMPANY. 543 TABLE OF WEIGHTS OF SHEET COPPER PER SQ. FOOT. STTJBB'S WIRE GAUGE. WEIGHT PER SQ. FOOT. 14 X 48 30 X 60 48 X 72 No. 1 lbs. 14 8oz. lt)S lt)S. ISl Itjs, 348 a 13 14 174 334 3 12 12 159 306 4 11 9 145 278 5 10 1 126 242 6 9 6 8 11 118 226 7 109 209 8 7 14 190 9 7 3 90 173 10 6 8 5 12 81 156 11 73 189 12 5 1 64 122 13 4 5 64 104 14 3 9 45 86 15 3 4 41 78 16 2 14 36 70 60 17 2 8 3S 18 2 2 27 52 19 1 15 24 47 20 1 12 22 43 21 1 9 20 39 22 1 7 18 35 23 1 4 16 31 24 1 2 15 28 25 1 0 13 25 26 14 11 21 27 12 3 9 18 28 10 7 15 " SIZES OF SLATE AND NUMBER IN A SQUARE. SIZE. NUMBER. SIZE. NDMBEF. SIZE. NUMBER. 14X 24 98 10x20 170 8x16 276 12x24 ]14 11x18 173 9x14 292 12x22 12T 10x18 192 8x14 337 11 x22 138 9x18 214 7x14 3'(5 12x20 140 10x16 2-22 8x12 400 11 X20 155 9x16 247 6x12 533 SIZES OF WELSH SLATE. Princesses 24 x 14 Duchesses 24x12 Small Duchesses 22x12 Countesses \ 20 x 10 Viscountesses 18 x 10 Ladies 16x10 Small Ladies 16 x 8 544 THE KITTREDGE COKKICE AND ORNAMEKT COMPAiq"Y. TEE IRON. WEIGHT PER LINEAL FOOT. 5 x8 30 7 x6 X% 30 6 X 3 X K 16>^ 4 x4 xX 14 3X x3K X >^ 12>^ 3 x3 X% 7% 2Kx2}4x}4 8 X X r'g 6 Lbs. X 2X X X 4 Lbs. S x2 x>i " IX X IK XX 3 » IX xl^^x X 2X " l^xl^x )i 2)^ « 1 xl x% 1 «' %x % « ANGLE IRON. WEIGHT PER LINEAL FOOT. 6 x6 X% 24 Lbs. 5 x5 16K 4 x4 X K 12K " 3>^x3>^x/ij 9 " 3 x3 x% 7 2K X 2X X x'g 5 " 2>^ X 2)^ X M 4X " 2 x2 x>^ 3K Lbs, IK X 1% X A- 2K " l}iXl^x^\ 2 " l^xl^x A IK " 1 xl XX 1 " Kx ^ ** THE KITTEEDGE CORNICE AJs^D ORHAMENT COMPANY. 545 PLAT BAE, IRON.— Weight per Lineal Foot.* Width, in Inches. Thickness, in Inches. Width, In in Inclios. 1-16 1-8 3-16 1-4 5-16 3-8 7-16 1-2 5-8 3-4 7-8 1 Lbs Lbs Lbs Lbs Lbs Lbs 1-16 .0132 .0263 .0395 .0526 .0658 .0789 .0921 .1053 .1316 .1579 .1842 .2105 1-16 1-8 .0263 .0526 .0789 .1053 .1316 .1579 .1842 .2105 .2631 •3158 .3684 .4210 1-8 3-16 .0395 .0789 .1184 .1579 .1973 .2368 .2763 .3158 .3947 .4736 .5526 .6315 3-16 1-4 .0526 .1053 .1579 .2105 .2631 .3158 .3684 .4210 .5263 .6315 .7368 .8420 1-4 5-16 .0658 .1316 .1973 .2631 .3289 .3947 .4605 .5263 .6573 .7894 .9210 1.053 5-16 3-8 .0789 .1579 .2368 .3158 .3947 .4736 .5526 .6315 .7894 . 9473 1 .105 .1203 3-8 7-16 .0921 .1842 .2763 .3684 .4605 .5526 .6447 .7368 .9210 1 .105 1 .289 .1474 7-16 1-2 1053 .2105 .3158 .4210 .5263 .6315 .7368 .8420 1 .053 1 .263 1 .474 .1684 1-2 9-16 .1184 .2368 .3552 .4736 .5920 .7104 .8289 .9473 1.184 1.421 1.658 .1895 9-16 5-8 .1316 .2631 •3947 .5263 .6578 .7894 .9210 1.053 1.310 1.579 1.842 .2105 5-8 11-16 .1447 .2894 .4342 .5789 .7236 .8683 1 .013 1.158 1 .447 1 .737 2.026 2.316 11-16 3-4 .1579 .3158 .4736 6315 .7894 .9473 1 .105 1 .263 1 .579 1 .895 2.210 2.526 3-4 13-16 .1710 .3421 .5131 .6841 .8552 1 026 1 .197 1 .368 1 .710 2.052 2.394 2.737 13-16 1-8 .1842 .3684 .5526 .7368 .9210 1.105 1 .289 1.474 1.842 2.210 2.579 2.947 7-8 15-16 .1973 .3047 .5920 .7894 .9867 1.184 1.381 1.579 1 .973 2.368 2.763 3.158 15-16 1 .210 .421 .632 842 1 .053 1 .263 1 .474 1 .684 2.105 2.526 2.947 3.368 1 1 1-8 .237 .474 .710 .947 1 .184 1 .421 1 .658 1.895 2.368 2.842 3.315 3.789 11-8 11-4 .263 .526 .789 1 .053 1 .316 1 .579 1 .842 2.105 2.031 3.158 3.684 4.210 1 1-4 1 3-8 .289 .579 .868 1.158 1 .447 1.737 2.026 2.316 2.894 3.473 4.052 4.631 1 3-8 11-2 .316 .632 .947 1 .2G3 1 .579 1.895 2.210 2.526 3.158 3.789 4.421 5.052 1 1-2 1 5-8 .342 •684 1.026 1 .368 1 .710 2.0.52 2.394 2.737 3.421 4.105 4.789 5.473 1 5-8 1 3-4 .368 .737 1 .105 1 .474 1.842 2.210 2.579 2.947 3.684 4.421 5.157 5.894 1 3-4 1 7-8 .395 .789 1 .184 1.579 1 .973 2.368 2.763 3.158 3.947 4.738 5.526 6.315 1 7-8 2 .421 .842 1.263 1.684 2.105 2.538 2.947 3.368 4.210 5.052 5.894 6.736 2 2 1-8 .447 .895 1.342 1.789 2.237 2.684 3.131 3.579 4.473 5.368 6.262 7.157 2 1-8 2 1-4 .474 .947 1.421 1.895 2.368 2.842 3.315 3.789 4.736 5.684 6.831 7.578 2 1-4 2 3-8 .500 1 .000 1.500 2.000 2.500 3.000 3.500 4,000 4.999 5.999 6.999 7.999 2 3-8 2 1-2 .526 1.053 1.579 2.105 2.631 2.158 3.684 4.210 5.263 6.315 7.368 8.420 2 1-2 2 5-8 .553 1.105 1.658 2.210 2.763 3.315 3.868 4.421 5.526 6.631 7.736 8.841 2 5-8 2 3-4 .579 1.158 1.737 2.316 2.894 3.473 4.052 4-631 5.789 6.947 8.104 9.262 2 3-4 0 17 O .605 1 .210 1.816 2,421 3.026 3.031 4.236 4.842 6.052 7.262 8.473 9.683 2 7-8 3 .632 1 .263 1.895 2.526 3.158 3.789 4.421 5.052 6.315 7.578 8.841 10.104 3 3 1-4 .684 1 .368 2.052 2.737 3.421 4.105 4.789 5.473 6.841 8.210 9.578 10.946 3 1-4 3 1-2 .737 1.474 2.219 2.947 3.684 4.421 5.157 5.894 7.368 8.841 10.315 11 .788 3 1-2 3 3-4 .789 1.579 2.368 3.158 3.947 4.736 5.526 6.315 7.894 9.473 11 .051 12.630 3 3-4 4 .842 1 .684 2.526 3.368 4.210 5.052 5.894 6.736 8.420 10.104 11 .788 13.472 4 4 1-4 .895 1 .789 2.684 3.519 4.473 5.369 6.262 7 157 8.946 10.736 12 525 14.314 4 1-4 4 1-2 .947 1 .895 2.842 3.789 4.736 5.684 6.631 7.578 9.473 11 .367 13.262 15.156 4 1-2 4 3-4 1.000 2.000 3.000 4.000 4.999 5 999 6.999 7.999 9.999 11 .999 13.998 15.998 4 3-4 5 1 .053 2.105 3.158 4.210 5.263 6.315 7.368 8.420 10.525 12.630 14.375 16.840 5 5 1-4 1.105 2.210 3.315 4 421 5.526 6.631 7.736 8.841 11 .051 13.262 15.472 17.682 5 1-4 5 1-2 1.158 2.316 3.473 4.631 5.789 6.947 8.104 9.262 11 578 13.893 16.209 18.524 5 1-2 5 3-4 1.210 2.421 3.631 4.842 6.052 7.262 8.473 9.683 12.104 14.525 16.946 19.366 5 3-4 6 1.2G3 2.526 3.789 5.052 6.315 7.578 8.S41 10.104 12.630 15.156 17.682 20.208 6 6 1-2 1.3G8 2.736 4.104 5.474 6.842 8.210 9.578 10.956 13.682 16.420 19.155 21.892 6 1.2 7 1.474 2.946 4.420 5.894 7.368 8.842 10.314 11.788 14.736 17.682 20.630 23.576 7 7 1-2 1.578 3.156 4.736 6.316 7.894 9.472 11 .052 12.630 15.788 18.956 22.102 25.260 7 1-2 8 1.682 3.366 5.052 6.736 8.420 10.104 11 .788 13.472 16.840 20.208 23.576 26.944 8 8 1-2 1.790 3.578 5.368 7.158 8.946 10.736 12.524 14.314 17.862 21 472 25.050 ■ 28.028 8 1-2 9 1.894 3.790 5.6S4 7.578 9.472 11.368 13.262 15.156 18.946 22.734 26.524 30.312 9 * From Part I, Munzinger's Engineers' and Mechanics' Tables." 546 THE KITTREDGE COIIXICE AND OEXAMEKT COMPANY. ARCHITECTS' SPECIFICATION FOR SHEET-METAL WORK. GALVANIZED SHEET-IRON. Use the best quality of iron, with coating per- fect and evenly laid, and free from buckles and crinkles. Trim all thick and uneven edges, and before working roll thoroughly to remove any inequalities of surface. Adapt the gauge of iron to the character of the work in hand. IsTo. 27 may be used in small mouldings. No. 26 is to be used for all ordinary work. Large un- broken surfaces are to be constructed of No. 24 and No. 22, according to strain and exposure. STRAIGHT MOULDINGS. No. 26 shall be the gauge used for the gene- rality of mouldings, No. 27 being employed for only the very smallest, and No. 24 being used in those of large members. Trim square at ends to admit of close joints. Roll thoroughly before working. Care must be taken in laying off members, that strict uniformity of parts is ob- tained. All bends and angles must be sharp and well defined. All curves must be smooth, and must conform strictly to stay or profile. CURVED MOULDINGS. Are to be true to profile throughout. They must be of correct sweep and proper pitch. Let all angles in profile be sharp and well defined, and all curves smooth and regular. In joining, solder heavily, use rivets in flanges where practicable, and where no flanges can be left, use lugs. Heavy iron is preferable to light, on account of greater stability. MITERS. In joining, rivet all fillets and flat parts. Heavily solder the curves, with a strap inlaid. In mouldings of large members, and construct- ed of heavy iron, the joint is to be riveted throughout. Construct to proper angle, and in joining maintain correct stay or profile of moulding perfectly. FRIEZE PIECES. Construct with weather-joint, against foot- moulding below, and bed-mouldings above. All mouldings around panels are to be sharp and clearly defined. Solder all ornaments in place thoroughly. Provide proper flanges for rivet- ing at joints. Provide lock or riveted joints against sides of brackets at ends. TRUSSES AND STOP-BLOCKS. In construction use No. 24 iron, unless of small sizes. Provide with flanges of profiles of mouldings ready for their attachment in process of putting up. Rivet flanges to sides, also rivet all joints, and solder thoroughly. BRACKETS AND MODILLIONS. Construct with lap-joints thoroughly soldered and carefully riveted. See that sharp angles are obtained. Avoid all twisting or winding in shape from careless handling. Incised work, cut scroll-work, and similar ornamentation, must be carefully cut, thoroughly soldered, and left clean and true in all respects. In attaching pressed-ornaments, see that they are thorough- ly soldered, and in construction so disposed as to fit snugly to the faces to which they are at- tached. Provide necessary ties and straps for fastening in putting upon the building. Pro- vide brackets with means of attachment for frieze-pieces at sides, and planceer above. Pro- vide modillions with fianges for joining to mo- dillion-course and planceer. WINDOW-CAPS. Construct of Nos. 26 and 24, galvanized sheet- iron, adapting the gauge according to the strain upon the parts. Thoroughly solder, strap and rivet all joints and miters. Extend frame- strips on to frame not less than two inches. Extend wall-strips into wall not less than three inches. Provide both frame-strips and wall-strips with stiff"ening edges. Extend key- stones and similar ornamental work back into wall for finish. Back-in all scrolls and similar structures, and allow no oper^parts in con- structions. Provide corbels with requisite straps and ties for fastening. In caps of great projection, support with requisite iron braces. Provide caps for old buildings with frame-strip to insert between frame and brick, and with flange at top for nailing against wall, and to re- ceive counter-flashing. THE KITTKEDGE CORNICE AKD ORis^AMEiq-T COMPANY. 547 DORMER WINDOWS. In gauge employ iron according to the parts. Thoroughly solder and rivet all joints .,nd miters. Fit all return mouldings to pitch of roof, and provide with proper flashing -flanges. Secure all brackets, modillions, scrolls and den- tils by soldering and riveting. For dormers fitting against very steep mansard roofs, con- struct sides out of ]^o. 24 j^alvanized-iron, pro- vided with a flashing-flange so constructed as to form a close gutter. Avoid piece-flashing and make a neat finish against slate roof. Cover roof with tin, laid in the best manner. HANGINQ GUTTERS. Use Xo. 27 to No. 24 iron, according to shape and size of gutter. Thoroughly rivet and solder on both sid»6 at all joints. Solder and rivet all miters, using straps and lugs for greater strength. In putting up, break sections each thirty feet, and provide each section with suit- able outlet. Fasten with wrought-iron hang- ers. Extend roof flange up under roof, as may be required to make a thorough job. Care must be taken to secure proper fall, and that outlets are provided at lowest points. CONDUCTORS. Use No. 27 iron for three inches in size and under; No. 26 iron for four inches in size; No. 24 iron for six inches in size; and Nos. 22 and 20 for larger sizes. Use longitudinal riveted joints, thoroughly soldered, in preference to grooved joints. Rivet and solder all cross seams. Employ corrugated elbows, galvanized for all right angles, and reversible elbows, galvanized, for all irregular angles. Use galvanized fasten- ings in putting up. PRESSED ORNAMENTS Must be bold in. figure, clear in outline, dis- tinct in all small members, and sufficiently deep in profile to show well from an elevation. They should be trimmed to an even surface, and in attaching to the structures which they are to ornament, they should be thoroughly soldered throughout. By all reasonable care in mani- pulation obtain as close an imitation as possible of a carved solid. Mouldings to which enrich- ments are to be attached should be formed to a profile similar to outline of enrichment, but which will receive it evenly at top and bottom, standing clear from it in the middle. Fasten to the iron by riveting and soldering, and leave clean and perfect on completion. SPUN-ZINC WORK. Urns, vases, finials, balusters, according to design and dimensions, are to be constructed of spun-zinc work. Use best quality of American zinc, of gauge adapted to the work. Spun-zinc half-balls are ornaments of utility, and can be used with good effect in various places. In at- taching, solder thoroughly, so as to make water-tight joints throughout. TIN WORK. Use the best bright charcoal tin, of standard brand, M. F. or Pontymister preferred, for gut- ters, IC for small gutters, and IX for large gut- ters. Use best charcoal roofing tin, of brand equal to M. F. or Pontymister for all roofs ; 20 X 28 in standing-seam roofs, and 14 x 20 in flat- seam roofs. For general purposes in roofing IC is preferred. Use IX when there is unusual exposure Thoroughly cleat to roof, make close joints, tight seams, and solder in all parts re- quired, in the most thorough manner. 548 THE KITTREDGE COHNICE AKD ORKAMEi^T COMPANY. HOW TO ESTIMATE ARCHITECTURAL SHEET-METAL WORK. In the article entitled the " Items oj Cost in Architectural Sheet- Metal TForZ:," at the com- mencement of this volume, we gave the general theory of estimating, which we strongly re- commend as being the pian calculated to pro- duce the best results, and for which the various tables and formulas here presented were spe- cially prepared. It would seem that there was but little to add to the remarks in that connec- tion; but more specifiq statements, together with some explanations and' examples, may serve to render the matter of more easy com prehension. Briefly recapitulating, we recommend careful analysis in all estimates, as compared with lump figures. For example, instead of making a gross figure upon a cornice, as worth so much per foot on a building complete, we would consider the matter under at least three heads, viz: Shop Cost, Transportation, and Putting Up. It is seldom that difi*erent jobs of work in this line are alike in their elements, or in their incident- al expenses. A close figure, therefore, can be made only by estimating each item separately, and in the light of all the knowledge that can be brought to bear upon it. It is with the item of Shop Cost, the work in its parts ready to be put up upon the building, that this book has particularly to do. Price lists and formulas are of very material assist- ance in such calculations, because classification can be obtained. On the other hand, no lists or classifications can be made of outside ex- penses. Transportation and putting-up are items to be figured specially for each contract. The cost of the former depends upon distance and the connections of railroads, water routes, etc. The cost of the latter will depend upon the class of workmen employed, their know- ledge and experience, the management by which they are controlled, and the shape, size, position and character of the building on which the work is to be put. The shape in which work is shipped has a material bearing upon the cost of transporta- tion and erection. All work sent out by the Kittredge Cornice and Ornament Company is carefully crated or boxed. Brackets, Modil- lions and Dentils are shipped detached from the mouldings of the cornice. Mouldings are nested in crates. Wrought iron look-outs are ordinarily put together complete and also crated. Dormers, if shape and size will admit, are shipped in one complete structure. If too large to allow of this they are shipped in two or more parts. Window and Door Trimmings, according to size and shape, are shipped either in complete structures, or in two or more parts. This same rule will apply to all other large and bulky work. The cost of transportation, although varying very much between difierent points on account of relative distance, is never a very heavy item. All straight mouldings, iron to pattern, and similar parts, are shipped at rates correspond- ing to iron in bundles by ordinary railroad classification. Wrought-iron lookouts, work cut and formed, and other similar parts, ship at rates corresponding with those of hardware by railroad classification. Finished work, like Window-caps, Dormers, and other bulky arti- cles, is shipped by ordinary classification at first-class to double first-class rates, according to bulk in comparison with weight. While these rates, especially the last item, may seem high, it is found by experience that they are very low, when considered in the light of a percentage. Before commencing any estimate, supposing either case, that the contract is to be priced in lump in advance, or that the agreement will be based upon a schedule of prices, with measure- ments to be made after the work is finished, the question of fair measurements arises. There are few arbitrary rules to be laid down. Cus- tom has established some, while others are found to be necessary to obtain value for work performed. Cornices are measured upon the line of ex- treme projection, which is ordinarily the front of the crown-moulding. The length of cornice projecting two feet, extending entirely around THE KITTKEDGE COliXICE Ai^I> OliXAMEKT COMPAis'Y. 549 a building, will exceed the length of the wall line by eight projections or sixteen feet. With some it has been customary to charge one foot extra each way as compensation for each miter, but we prefer to make an arbitrary price upon miters and pay no attention to them in measurements. The measurement of cornices occurring be- tween trusses, will be the net length inside of the trussei=. When stop-blocks over brackets are used, an equitable measurement is the length between centers of the outside brackets. AVhere cornices are returned around pilasters and in other similar constructions, the mea- surement is upon the line of greatest projection, following this line accurately in all cases. Chimney caps, and other work composed of mouldings, are measured upon the same princi- ples as those applied to cornices. In measuring the individual mouldings con- stituting a cornice, the line of measurement of each moulding will be upon the line of its greatest projection. By this it will be seen that the mouldings of a cornice will not all measure the same. Referring to the example above, of a cornice with projection of two feet extending entirely around a building, supposing the foot- moulding to project from wall line only three inches, the difference between the length of crown-moulding required, and the length of the foot-moulding, will be fourteen feet. In considering Shop-Cost, a complete analysis is desirable. In estimating a cornice, ascertain the number of feet of each moulding, its girt, and the miters belonging to it. Add to the list thus commenced, the number of brackets, mo- dillions, dentils, trusses, and frieze-pieces, with a memorandum of their several dimensions, features of ornamentation, etc. Price by the tables given in this book, and extend amounts as in an ordinary invoice. Add for all extras, such as patterns, as recited In the article en- titled Extras belonging to Architectural Sheet-Metal Work.*' This produces a lump amount for the given work. If a price per foot is required, divide the sum thus obtained by the length of cornice, the result will be the price per foot. We can make all this plainer by an estimate in detail, which we annex, and to which the reader is referred. Window-Caps, Drrmer-Windows, Chimney- Tops, and other special structures of similar character, admit of analysis upon the same general principle, to a greater or less extent. Mouldings, wherever found, are to be priced by the moulding list. Miters are to be allowed the same in chimney- tops, dormers, etc., as in a cornice. Window-caps have beeii catalogued to such an extent, that special estimates upon them are in a certain measure rendered unne- cessary. Reference to a catalogue will either give the very design and size required or some- thing so nearly the same that a satisfactory price can be obtained by comparison. The same rule may be made as to conductors, ridgings? crestings, cresting-finials, hanging-gutters, etc. A trade catalogue will ordinarily give the de- sired styles and prices of all such items. The skill and knowledge required in an esti- mate, then, is reduced to' about this: Sufficient familiarity with architectural and mechanical principles to enable one to know what parts are required to constitute a given design, and to comprehend the construction; business ability, in combination with this Jcnowledge, sufficient to make a correct list of quantities and parts, and to select prices from tables such as are pre- sented in this volume; and sufficient familiari- ty with the management of outside work to judge correctly of the labor and expense at- tending the putting up of the given work, and to estimate upon the transportation. No rules can be laid down to which there will not be found some exceptions. The unending variations and changes in Architectural Sheet- Metal work are continually bringing up some new features, new constructions, new shapes and new combinations. Judgment and care in comparisons will successfully overcome all such diflSculties. Make comparisons by items after the analysis has been made rather than by the complete work as single item. There are few contracts, every item of which can be found even in lists as profuse and extended as in this book. Accordingly, one of the first things a beginner in estimates will be required to learn, is that of careful comparisons, and the use of good judgment in deciding results. Careful study in this branch of trade is attended with the same beneficial results as attention and care paid to any other affair in business. The al- most infinite detail involved in this business, distinguishes it from almost any other branch of trade, and renders it of necessity a matter of careful study to all those who would be suc- cessful in it. 550 THE KITTREDGE CORXICE AND ORN'AMEJS'T COMPAls^Y. THE FLAT CRIMPED ELBOW IS AN IMPROVEB MEANS OF CONDUCTING Being made in CURVED form by EXTERIOR FLAT CRIMPS the INTERIOR IS SMOOTH and pre- sents no obstacle to the easy flow of Fluids. They are made of any angle desired, and by their use eiither for ' STEAM, HOT AIR OR WATER, Strong, durable and elegant finished work can be made, thus aiding the Architect in beautifying a house, and giving to its owner a HANDSOME BUILDING WITHOUT INCREASING THE COST. THE SUCCESS THAT HAS ATTENDED THE INTRODUCTION OF Has led us to put in the market the IMPROVED LOCK SEAM LEADER PIPE, And earnestly commend it to your notice, being equally serviceable and economical when used for STEAM, AIR, LEADER OR CONDUCTOR PIPE, and the CONVEYANCE OF FLUIDS OF ALL KINDS. It is made of 27 iron, and then galvanized, making them very strong and perfectly rust- proof. Send for Samples and Prices to any Dealer in Tinners' Supplies, or to LEADER ELBOW CO., 214 Main Street, CIITCIITITATI, 0. THE KITTREDGE CORNICE AKD ORiq"AMEXT COMPAIsTY. 551 The Kittredge Cornice and Ornament Co.. jS^XjDESlVr, OHIO. 4 N. B.— Salem is located on the Pittsburgh, Fort Wayne & Chicago R. R., seventy miles Irom Pittsburgh. It is also seventy miles from Cleveland, via C. & P. R. R. and Alliance. FOR THE TRADE, Prices to the Trade guaranteed to Ise 'belo'^ tlie Cost of Froduotion in any other Shop in the country. Quality of work, in point of style, finish, and orna- mentation, unequalled anywhere. Best materials and most skillful workmanship always employed. Work furnished either complete, ready for putting up, or in parts, ready for joining. Construction Drawings, fully explaining how work is to be put together, and how it can best be put upon the building, furnished with every shipment. Contracts for the execution of work to Architects' special designs made at any time. Drawings for estimates may be sent at our expense per express. They will be returned immediately with proposition. Full instructions and explanations freely given to the trade at all times, concerning all questions of erection and construction. Satisfactory contracts made for delivery of work to all sections of the country, at low rates of freight. This company possesses the only steam power cor- nice machinery in the world. It employs every pos- sible labor-saving device which ingenuity can suggest. Its business in every department is managed by the most experienced and talented men to be found. It has constantly employed a large staff of architects, engineers, artists, modellers, draughtsmen, die-sinkers, machinists, and metal-workers — of the highest skill — rendering it all times forehanded and ready for the largest contracts and the most intricate work offered. It is the largest consumer of galvanized sheet-iron in the country. In 1875 this company executed over eight hundred contracts, besides furnishine: the work for the Centennial Buildings. It has shipped its goods to every State in the Union. Whatever advantages this company may possess, all and singular, are freely tendered to the trade. Its sales are exclusively wholesale, and at low wholesale pri.-es. It furnishes sheet-metal work to the tinner and builder in the same general way that a planing mill supplies wood-work to the carpenter. No carpen- ter with a planing-mill in his reach can afford to work out his mouldings, or build his doors and sash. The same conclusion regarding sheet-metal goods is inevi- tably forced upon all who investigate the advantages offered by this establishment. The business of this company was established four years ago. Its rapid growth testifies to its popularity with the trade. It already numbers among its custo- mers many of the oldest and best established cor- nice contractors in the land. With largely increased facilities for manufacture it is now prepared to offer its goods to a larger class of customers than it has heretofore been able to supply— accordingly it re- spectfully solicits correspondence with every cor- nice-worker, roofer, tinner, and builder in the country. There is profitable trade in this line of goods in every town and village, to say nothing of the cities. Sheet- metal architectural finish with the present prices of materials, can be put upon a building cheaper than wood, and at the same time afford a reasonable profit for handling. The detail and finish accomplished in sheet-metal work is far superior to that possible to ob- tain in cut stone or cast-iron, while in cost it is much less than either. The durability of galvanized-iron is undisputed. Accordingly it has the great merits of expediency, economy, and utility. Architects are fast learning to appreciate these advantages and are very generally specifying galvanized-iron finish in prefer- ence to any and all other materials. If there are any contemplated buildings in your vi- cinity, either large or small, and with or without sheet- metal work specified, whether under the management of an architect or otherwise, you will find it to your interest to correspond with us concerning them. Write early. Too often matters of this kind are de- layed until the goods are actually required, allowing no time for correspondence, construction of work, and transportation. Correspondents with whom we are not Dersonally acquainted, v/ill save loss of time when negotiating for work, by accompanying their letters with their refer- ences. The name of some local bank or banker, or a wholesale house in any of the cities, is always pre- ferred. All communications carefully attended to. Inqui- ries promptly answered. ^ Rights and privileges of customers, arising from priority of application, or es- tablished trade, carefully observed and fully guarded. Address, The Kittredge Cornice and Ornament Co., Salem, 0. 552 THE KITTREDCxE CORNICE AND ORNAMENT COMPANY. SHEET-METAL BUILDER, Be^inningf "^ith the No. for April, 18*76. A Premium for each and Every Subscriber. Liberal Induce- ments offered to those Gretting* up Clubs. dkfeftil Stteritioi\ S^ked to tl\e followiii^ ^pe(^ikl Pfeir\iiiii\^ : THE n.EGrTJXj^I^ I*M33VEITJ3Vr s Every person remitting $2.00 to the publishers -will receive the Sheet-Metai, Builder for one year (twelve numbers) post- age prepaid, and as a premium, the above handsome pressed-zinc Picture Frame, unique in design, and unequalled anywhere in style and finish. It is something entirely new, gotten up expressly for this purpose. Its extreme dimensions are 16x12 inches. A characteristic photograph of some part of the sheet-metal work used in the Centenniai. Buildings will be placed In the frame, and the whole sent by mall, or prepaid by express. The frame above described is something entirely novel, and is an object of interest to every metal-worker as a specimen of fine workmanship, and as an Illustration of the almost universal utility of sheet-metal work for purposes of embellishment and decoration. To the general reader, it is a specimen of art worthy of a place in a library or drawing-room. Each subscriber to the Sheet-Met ai. Builder for Volume 8, whether remitting singly or in connection with other names In clubs, will receive the above handsome premium, alone worth the price of subscription. The photograph of the Centennial Avork will be something to be admired and preserved. Jfeitlier the frame nor the photograph can be obtained in any other way than by asubstcription to the Sheet-Metal Builder. While offering the magnificent premium above described, to each and every subscriber, we are also prepared to make very liberal terms with those getting up clubs. To any person sending ua Two Names and Four Dollars, we will send, besides the regular premiums, one copy of either of the following : Book of Sheet-Metal Architectural Ornamentg. Book of Sheet-Metal Cornices Window Gapis, &c. Tin Roofing Tables. For i^Tyur JVc/mes- and Eight Z)o?Zars, we will send in addition to the regular premiums, one copy of The Sheet-Metal Exemplar, or one copy each of either two of the abuve-namcd books. 1 or Six Namea and Twelve Dollars, we will send, in addition to the regular premiums. Full Figure of a Dog, in pressed- zinc. For Twelve Fames and Twenty-four Dollars, we will send, in addition to the regular premiums. Horse with Base, pressod-zinc, or Pressed-zinc Sign Boot. For Twenty Names and Forty Dollars, we will send. In addition to the regular premiums, The Compendium of Archi- tectural Sheet-Metal Work. And for Sixty Names and One Hnndred and Twenty Dollars, we will send, in addition to the regular premiums, The Cen- tennial American £agle, pressed-zinc. XjIBESKJIlI^ OA.SII A It >I 1 ^ TV T » Will be made with all who desire to work upon a commission Instead of for either of the special premiums. Further particulars by mail to all applicants. Address all communications and make all remittances payable to THE ZZTTEEDaE COHITICE AlTD OZIITAMEITT CO., 553 WASHINGTON. FRANKLIN At great expense we have prepared Models and Dies, to produce for tliis Centennial year, a characteristic example of We are now prepared to supply these beautiful Statuettes, including pedestal, at $5.50 each, or $10.00 for the pair. In size they are each 14)^ inches high, including pedestal, and are suitable for Parlor or Library. Sent by express securely packed. Liberal discount to the trade. Agents wanted everywhere. Address, THE IIITTP«BDG-E COHNICE AND OHITAMEHT CO., UHBIDOE & C© SOLIOITOES AITD ATTORNEYS -FOR- U. S. AND FOREIGN PATENTS, -AND- 127 Superior Street, Opposite American House, CLEVELAND, OIILO. "With Associated Offices in Washing'ton and Foreign Countries. TABLE OF CONTENTS. * PAGE. Angle Iron 544 Architects' Specification 540 Architectural Ornaments 208 Art Gallery, Centennial Exhibition 315 Austin's Conductor Fastening 539 Balls 380 Balusters 281 Bar Iron, weight per foot 545 Beaded Gutters 392 Bed Mouldings 407 Bolts 540 Boot 266 Box Gutters 394 Bracket Fronts, Spun 287 Brackets and Modillions 27-165 Branches 244 Brass, weight per square foot 542 Buds 225 Button Headed Bolts 540 Capitals 271 Capitals, Main Building, Centennial Exhibition. . . 339 Caps, Window and Door 461 Catalogue Mouldings 387 Centennial Eagle 338 Center Ornament in Frieze, Main Building 340 Chimney Caps 525 Circular Mouldings 535 Complete Balls 280 Conductors 536 Conductor Hooks 536 Console • 269 Construction Drawings 377 Copper, weight per square foot 542 Cornice in Picture Galleries, Memorial Hall 334 Cornice, Clarendon Hotel 357 Cornucopia 267 Corrugated Conductors 538 Cost of Tin for Roofing 17-20 Cost of Galvanized Iron at different discounts 21 Court House, Van Wert, O 349 Crestings 247 Cresting at Ends, Art Gallery 329 Cresting on Pavilions, Art Gallery 328 Crimped Iron 385 Crimped Planceers, Friezes, etc 460 Crimped Elbows 539 Crockets 224 Crown Mouldings 397 Curved Mouldings 535 Cut and Formed Work 370 Date Tablet, Art GalJery 316 Dentils 166 Dentil Mouldings 436 Details, Scott Block .* 354-356 Details, Court House, Van Wert 350 Diagram of Entablature 8 Directions for Crestings 247 Dog 266 Doors and Shutters 541 Dormer Windows 521 Drapery 242 Drops 231 Eagle 266 Eagle on Turrets, Main Building 338 Egg and Dart Mouldings 262 Elbows .539 Elbows and Shoes, Corrugated 538 Emblems 265 Emblematic Signs 265 Enrichments for Mouldings 254 Entablature 8 Estimate in Detail 198-206 Example of Estimate 198-206 Expanding Conductors 538 Expense of putting up 376 Extras, description of 382 Extras, Sheet-Metal Brackets, price of 27 Extras for Trusses 167 Extras for Stop Blocks 167 Extras, Sheet-Metal Modillions, price of 27 Extras on special profiles of Mouldings 387 Extras for Frieze Pieces 181 Extras on Curved Moulding 535 Faces 230 Feathers 246 Finials 563 Finials on Turrets, Main Building 344 Fire Proof construction in Cornices 374 Flat Crimped Elbows 539 Flat Bar Iron, weight per foot 545 Flowers 226 Flower Garland 324 Flutes 246 Foot Mouldings 444 For the Trade 363 For the Builder 384 For the Architect 383 Form of Proposition 206 Formula for estimating Mouldings 22-25 Frames 268 Frieze 460 Frieze Ornamentation 321-323 Frieze Pieces 180 Fruit 228 Fruit Garland 325 Galvanized Sheet Iron 21 Galvanized Iron Gutters 291 Galvanized Iron Pipe 536 Galvanized Iron Ridging 388 Galvanized Nails 540 Gargoyle 266 Garlands 324-325 Griflan 267 Gutters 391 Half Balls 280 Half Round Gutters :'02 Hanging Gutters '-^'^^ Heads. 330 Hip Moulding 388 Horses 265 How to estimate Architectural Sheet Metal Work. 548 How to order Sheet-Metal Work 364 How to put up Sheet-Metal Cornices 371 Improved Wrought Iron Lookout 520 Iron Look-outs 375 Iron, Wrought, weight per square foot 542 Items of Cost 3 Laurel Garland 331 Lead, weight per square foot 5^2 Leaves for Brackets 212 THE KITTKEDGE COEKICE AND ORKAMEKT COMPANY. Leaves for Garlands 319 Light Sheet Iron Doors and Shutters 541 Lintel Cornices 491 Lintel Trusses 168 Look-out Patterns 380 Lower Finish interior of Dome, Art Gallery 336 Main Cornices 494 Main-Cornice Trusses 170 Main Building, Centennial Exhibition 337 Methods of putting up Cornices 371 Miters in Mouldings, price of 23-25 Modillions 134-165 Modillion Faces, stamped 246 Modillion Fronts, Spun 287 Modillion Mouldings 436 Mortars 286 Nails 540 Names of Orders and Estimates 367 Nomenclature 6 Numbers and weight of Sheet Zinc 542 Number of slate in a square 543 O. G. Gutters 393-395 Ornaments 208 Panel Ornaments 233 Patent Crimped Iron 385 Patent Corrugated Conductors 538 Patent Ribbed Tubing 537 Patent Sheet Iron Doors and Shutters 541 Patent Wrought Iron Lookout 520 Pedestal on Pavilions, Art Gallery 327 Pedestal, Top of Dome, Art Gallery 333 Picture Frames 268 Plain Surfaces 460 Plain Frieze 460 Plan of Cornice with Diagram of Mouldings 379 Planceers 460 Points 231 Principal Cornice, Interior of Dome, Art Gallery . . 335 Proposition, Form of 206 Putting up Sheet-Metal Cornices 371 Putting Cornices on to old Buildings 373 Quantity of Tin in Roofing 13-17 Quarter Circle Gutters 392 Ribbons 242 Ribbed Tubing 537 Ridging 388 Roofing Nails 540 Rope Mouldings 255 Rosettes 209 Scott Block, Erie, Penn 352 Scrolls 236 Shape in which work is shipped 369 Sheet Copper, weight per square foot 543 Sheet Iron Doors and Shutters 541 Sheet-Metal Cornices 490 Sheet-Metal Cornices, fire-proof construction 374 Sheet-Metal Cornices, put up on wood 371 PAGE. Sheet-Metal Dentils 166 Sheet-Metal Gutters 391 Sheet-Metal Letters 530 Sheet-Metal Mouldings 22-25 Sheet-Metal Pavilion, Centennial Exhibition 360 Sheet-Metal Statuary 270 Shells 233 Shutters 541 Sign Letters 530 Sills 489 Sizes of Slate 543 Slate 543 Spandrel Pieces, Main Building 341-343 Spandrel Pieces, Art Gallery 317-320 Speaking Tubes 540 Specification for Sheet-Metal Work 546 Spun Balls 280 Spun Balusters 281 Spun Fronts 287 Spun Mortars 286 Spun Rolls 287 Spun Wires 284 Statuary - 270 Stems 244 Stop Blocks 175 Straight Mouldings 22-25 TIron 544 T Shank Conductor Hooks 536 Tables of Mouldings 22-25 Terms in common use among Cornice Workers ... 6 Time required to fill orders 368 Tin Roofing Tables 12-20 Tin Roofing Nails 540 Tinned Nails 540 Tips 231 Trophies over Entrances, Main Building 346 Trophies on Corner Towers, Main Building 345 Trusses and Stop Blocks 167-179 Urns 284 Upper Cornice of Dome, Art Gallery- 332 Van Wert Court House 349 Vanes 265 Weight of Sheet Zinc 542 Weight of Galvanized Iron, per square foot 21 Weight of square foot different metals 542 Weight per foot of T Iron 544 Weight per foot of Angle Iron 544 Weight per foot of flat Bar Iron 545 Welsh Slate 543 Window and Door Caps 461 Window Sills 489 Wood Construction in Cornices 372 Wrought Iron Look-outs 375 Wrought Iron, weight per square foot 542 Y. M. C. A. Building, Baltimore 359 Zinc, numbers and weights of sheet 542 Zinc Balls 280 GENERAL INDEX. CORNICE WORK, ETC. NUMBERS 1 TO 988. DESIGN. PAGE. 1 Window Caps 4G2 2 flo 402 3 do 462 4 do 462 5 do 462 6 do 462 7 do 462 8 do 462 9 do 463 10 do 463 11 do 463 12 do 463 13 do 463 14 do 463 15 do 463 16 do 463 17 do 464 18 do 464 19 do 464 20 do 464 21 do 464 22 do 464 23 do 464 24 do 464 25 do 463 26 do 4()5 27 do 465 28 do 465 29 do 465 30 do 465 31 do 465 32 do 465 33 do 466 34 do 466 35 do 466 36 do 466 37 do 466 38 do 466 39 do 466 40 do 466 41 do 467 42 do 467 43 do 467 44 do 467 45 do 467 46 do 467 47 do 467 48 do 467 49 do 468 50 do 468 51 do 468 52 do 468 53 do 468 54 do 468 55 do 468 56 do 468 57 do 469 58 do 469 f,9 do 469 60 do 469 61 do 469 62 do 469 63 do 469 64 do 469 65 do 470 66 do 470 67 do 470 68 do 470 69 do 470 70 do 470 71 do 470 72 do 470 73 do 471 74 do 471 75 do 471 76 do 471 77 do .471 78 do 471 79 do 471 DESIGN. PAGE. 80 Window Caps 471 81 do 472 82 do 472 83 do 472 84 do 472 85 do 472 86 do 472 87 do 472 88 do 472 89 do 473 90 do 473 91 do 473 92 do ...... 473 93 do 473 94 do 473 95 do 473 96 do 473 97 do 474 98 do 474 99 do 474 100 do 474 101 do 474 102 do 474 103 do 474 104 do 474 105 do 475 1U6 do 475 107 do 475 108 do 475 109 do 475 110 do 475 111 do 475 112 do 475 113 do 476 114 do 4-6 115 do 476 116 do 476 117 do 476 118 do 476 119 do 476 120 do 476 121 do 477 122 do 477 123 do 477 124 do 477 125 do 477 126 do 477 127 do 477 128 do 477 129 do .478 130 do 478 131 do 478 132 do 478 133 do 478 134 do 478 135 do 478 136 do 418 137 do 479 138 do 479 139 do 479 140 do 479 141 do 479 142 do 479 143 do 479 144 do 479 145 do 480 146 do 480 147 do 480 148 do 480 149 do 480 150 do 480 151 do 480 1.52 do 480 153 do 481 154 do 481 155 do 481 156 do 481 157 do 481 158 do 481 DESIGN. PAGE. 159 Window Caps 481 160 do 481 161 do 482 162 do 4b2 163 do 482 164 do 482 165 do 482 166 do 482 167 do 482 168 do 482 169 do 483 170 do 483 171 do 483 172 do 483 185 Window Sill 489 186 do 489 187 do 489 188 do 489 189 do 489 190 do 489 181 do 489 192 do 489 230 Cornice 494 231 do 495 232 do 496 233 do 497 234 do 498 235 do 499 236 do 500 237 do 501 239 do 502 240 do 503 241 do 504 242 do 505 243 do 506 244 do 507 250 do 515 321 Gutter 394 322 do 394 323 Ridging 390 324 do 389 325 do 389 .326 do 388 327 do 388 330 Gutter 391 331 do 392 332 do 392 333 do 395 334 do 395 335 do 395 336 do 392 337 do 392 338 do 391 339 do 340 do 394 341 do 394 342 do 396 343 do 396 468 Bed Moulding 413 469 do 418 470 do 419 471 do 415 472 do 416 473 do 417 474 do 419 475 do 416 476 do 414 471 do 414 478 do 418 479 do 419 480 do 415 481 do 417 482 do 417 483 do 420 484 do 416 485 do 414 486 do 414 487 do 418 488 do 419 DESIGN. PAGE. 489 Bed Moulding , 415 490 do 417 491 do 418 492 do 420 493 do 416 494 do 415 4i)5 do 407 496 do . . , 408 497 do . 413 498 do 408 499 do 409 500 do . .. 411 501 do , . 412 502 do 410 503 do 410 504 do 407 505 do ... 408 506 do 413 507 do 409 508 do 409 509 do 411 510 do 412 511 do 411 512 do 410 .513 do 407 514 do 508 .515 do 413 516 do 409 517 do 410 518 do 412 519 do 412 520 do 411 522 do 426 523 do 427 524 do 433 525 do 430 .526 do . 431 527 do 432 528 do "434 529 do 429 530 do 428 531 do 427 532 do 428 533 do , 434 534 do . . 431 535 do 432 536 do 433 537 do 435 538 do 430 539 do 429 540 do 427 541 do 428 542 do 434 543 do 431 544 do 432 545 do 433 546 do . . . "iO.l 547 do . . 430 548 do 429 549 do 427 550 do 428 551 do 434 552 do 431 553 do 432 554 do 433 555 do 435 556 do 430 557 do 429 568 do 420 559 do 421 561 do .... 422 562 do 422 564 do 423 56") do 424 566 do 425 .56 T do 420 568 do 421 569 do . 425 570 do .... 422 THE KITTREDGR COENICE AND ORNAMENT OOMPAKy. DESIGN. PAGE. 571 Bed Moulding 423 572 do 426 578 do 423 574 do 424 575 do 425 576 do 421 577 do 421 578 do 426 579 do 422 580 do 423 581 do 426 582 do 424 583 do 424 584 do 425 585 Foot Moulding 451 586 do 451 587 do 452 588 do 452 589 do 451 590 do 451 591 do 454 592 do 453 59 i do 452 594 do 454 595 do 453 596 do 452 597 do 456 598 do 455 599 do 457 600 do 456 601 do 455 602 do 457 603 do 456 604 do 455 605 do 45 r 606 do 457 mi do 456 608 do 458 609 do 444 610 do 445 611 d6 444 612 do 445 613 do 445 614 do 444 615 do 446 616 do 446 617 do 447 618 do 447 619 do 446 620 do 447 621 do 450 622 do 449 623 do 449 624 do 450 625 do 449 626 do 450 fi27 Crown Moulding. ... 399 628 do 399 629 do 399 630 do 400 ()31 do 403 632 do 403 633 do 403 634 do 404 635 do 401 636 do 401 637 do 402 638 do 402 639 do 402 640 do 397 641 do 397 642 do 398 643 do 398 644 do 398 645 do 400 646 do 400 647 do 401 648 do 404 649 do 404 650 do 405 651 do 4( 5 652 do 405 656 Modillion Moulding 439 657 do 440 658 do 438 659 do 439 660 do 440 661 do 439 662 do 441 663 do 442 (564 do 440 DESIGN. PAGE. 665 Modillion Moulding 442 6()6 do 443 667 do 441 668 do 442 669 do 443 670 do 441 671 do 442 672 do 443 673 do 441 674 Foot Moulding 453 675 do 454 676 do 454 677 Cornice 519 678 do 509 679 do 508 680 Window Cap 483 681 do 483 682 do 483 683 do 484 684 Cornice 491 685 Stop Block 177 6e6 Truss 172 687 Stop Block 176 688 Truss 170 689 Stop Block 177 690 do 175 691 do 1'76 692 Truss m 693 do ITl 694 do 170 697 do 168 698 Foot Moulding 453 699 do 458 700 do 458 701 do 459 702 do 459 7«3 do 445 704 do 446 705 do 447 706 do . . 448 707 do 448 708 do 448 709 Mod. or Dent Mld'g 436 710 do 438 711 do 437 712 do 436 713 do 438 714 do 437 715 do 436 716 do 437 717 do 437 718 do 438 719 do 440 720 do 439 721 Cornice 513 722 do 512 727 Window Cap 484 728 do 484 729 do 484 730 do 484 731 do 484 732 do 485 733 do 485 734 do 485 735 do 485 736 do 485 737 do 485 738 do 486 739 do 486 740 do 486 741 do 486 742 do 486 743 do 486 744 do 486 745 do 486 746 do 487 747 do 487 748 do 487 749 do 487 750 do : 487 751 do 487 752 Gutter 393 753 do 393 754 do 393 755 do 393 756 Ridging 389 757 do 389 758 Enriched Cr'n Mld'g 406 759 Modillion 134 760 do 135 761 do 136 DESIGN. PAGE. 762 Modillion 137 763 do 138 764 do 139 765 do 140 766 do 141 767 do 142 768 do 143 769 do 144 770 do 145 771 do 146 772 do 147 773 do 148 774 do 149 775 do 150 776 do 151 777 do 152 778 do 153 779 do 154 780 do 155 781 do 156 782 do 157 783 do 158 784 do 159 785 do 160 786 do 161 787 do 162 788 do 163 789 do 164 790 do 165 791 Bracket 28 792 do 29 793 do 30 794 do 31 795 do 32 796 do 33 797 do 34 798 do 35 799 do 36 800 do 37 801 do 38 802 do 39 803 do 40 804 do 41 805 do 42 806 do 43 807 do 44 808 do 45 809 do 46 810 do 47 811 do 48 812 do 49 813 do 50 814 do 51 815 do 52 816 do 53 817 do 54 818 do 55 819 do 56 820 do 57 821 do 58 822 do 59 823 do 60 824 <10 61 825 do 62 826 do 63 827 do 64 828 do 65 829 do 66 830 do 67 831 do 68 832 do 69 833 do 70 834 do 71 835 do 72 836 do 73 837 do 74 838 do 75 839 do 76 840 do 77 841 do 78 842 do 79 843 do 80 844 do 81 845 do 82 846 do 83 847 do 84 848 do 85 849 do 86 850 do 87 851 do 88 852 do 89 DESIGN. PAGE. 853 Bracket 90 854 do 91 855 do 92 856 do 93 857 do 94 858 do 95 859 do 96 860 do 97 861 do 98 862 do 99 863 do 100 864 do 101 865 do 102 866 do 103 867 do 104 868 do 106 869 do 106 870 do 107 871 do 108 872 do 109 873 do 110 874 do Ill 875 do ..• 112 876 do 113 877 do 114 S78 do 115 879 do 116 880 do 117 881 do 118 882 do 119 883 do 120 884 do 121 885 do 122 886 do 123 887 do 124 888 do 125 889 do 126 890 do 127 891 do 128 892 do 129 893 do ... 130 894 do 131 895 do 132 896 do 133 899 Truss 173 and 519 900 do 174 901 Stop Block 179 902 do 519 and 179 903 do 514 904 Trues 172 905 Letters 534 9C6 do 534 907 do 53:3 908 do 533 909 do 530 910 do 531 911 do 531 912 do 532 913 do 532 914 Frieze Piece 182 915 do 186 916 do 187 917 do 185 918 do 183 919 do 184 920 do 188 921 do 189 922 do 190 923 do 191 925 do 193 926 do 193 927 do 193 931 do 197 932 » do 196 933 do 195 934 do 194 935 Cornice 51 S 936 do 514 937 do 517 938 do 511 939 Dormer Window .... 521 940 do .... 522 941 do .... 522 942 do .... 523 943 do .... 523 944 do ... 524 945 do .... 524 946 Truss 173 947JStop Block 178 948 do 178 949 Cornice 357 THE KITTREDGE CORKICE AKD ORNAMENT COMPAN"Y. DESIGN. PAGE. 950 Truss 174 951 Cornice 511 955 do 491 956 do 492 957 do 492 958 do 493 959 Truss 169 960 do 168 961 do 169 962 do 175 963 Chimney Cap 528 DESIGN. PAGE. 964 Chimney Cap 526 965 do 526 966 do 525 967 do 527 968 do 525 969 Dentil 166 ^0 do 16(5 971 do 16'. 972 do 166 973 do 166 974 do 166 DESIGN. PAGE. 975 Window Cap 488 97(5 do 488 977 do 488 978 do 488 979 Chimney Cap 529 980 Door Hood 201 201 982 Elevation , 365 983 Plan 364 984 Diagram of Wood DESIGN. PAGE. 985 Diagram of Wro't Iron Lookout 374 986 Diagram of Wro't li-on Lookout. 351, 375 987 Diagram of Wood Lookouts 371 988 Diagram of Wood Lookouts 372 ORNAMENTS, TOGETHER WITH EXAMPLES OF COMBINATIONS, ETC. NUMBERS 1001 TO 1776. ESIGN. PAGE. PKICE. 1001 Egg and Dart 263 per ft. $0 28 1002 " 263 " 40 1003 " 263 " 55 1(!04 " 263 " 20 1005 " 263 " 25 1006 Bead 254 " 07 1007 Enrichment 262 " 25 1009 Kope 256 " 20 1010 " 255 " 08 1011 Enrichment 258 " 40 1013 Bead 254 " 12 1014 Enrichment 260 " 15 1015 *' 260 35 1016 " 261 " 20 1020 Enrichment 259 30 1021 " 257 per ft. in parts 45 1021 " 257 " complete 75 1022 Rope 257 " in parts 30 1022 " 257 " complete 60 1023 Enrichment 260 per It. 20 1024 261 " 35 1025 ** 2.59 " 35 1027 " 258 " 75 1028 " 2.59 " 50 1029 Bead 255 " 30 1030 Enrichment 261 " 60 1031 " 258 " 60 1032 Rope 257 ; " 30 1033 Enrichment 264 per pr. 45 1034 Rope 256 per ft. 12 1035 257 " 65 1035 " 257..per ft. without leaves 4(J 1037 Egg and Dart 262 per ft. 25 1038 Enrichment 258 " 22 1039 " 260 " 17 1040 Rope 2.56 *' 12 1041 Enrichment 262 " 25 1042 Rope 256 " 25 1043 " 256 " 10 1044 Enrichment 259 " 40 1045 Egg and Dart 262 " 25 1046 Enrichment 259 " 25 1047 Bead 254 " 10 1048 Enrichment 261 " 20 1049 Bead 254 " 10 1050 Egg and Dart 262 " 20 1051 Rope 256 35 1052 Enrichment 258 " 60 1053 " 255 " 30 1054 " 264 •' 20 1055 " 262 " 35 1056 " 254 " 20 1057 " 255 " 35 10.58 " 261 " 30 1059 " 254 " 25 1085 Crown Moulding, Dome Deck 326 1103 Enrichment 260 " 25 1192 Interior of Dome 335 1194 Pedestal on Pavil- ions 327 1195 Lower Cornice, In- terior Dome 336 ESIGN. PAGE. PRICE. 1196 Frieze Ornament 323 1197 Eagle 321 1198 Scrolls in Frieze 322 1199 Frieze Ornament 340 1200 Balustrade Dome Cornice 330 1231 Rope 255 per ft. , 150 10 1232 " 257 " 50 1243 Tip 231 each 10 1244 " 231: " 40 1245 " 231 " 40 1246 " 231 20 1247 " 231 " 60 1248 " 231 " 30 1249 " 231 " 25 1250 Cresting 247 per ft. single face 70 12.^0 '« 247 " double lace 1 65 1251 «• 248 " single face 90 1251 " 248 " double face 2 40 1252 " 251 " single face 90 1252 " 251 " double face 2 25 1253 *• 251 " single face 100 1253 " 251 " double face 2 65 1254 " 248 " single face 40 1254 " 248 " double face 100 1255 " 250 single face 120 1255 " 250 double face 3 00 1256 " 248 " single face 25 1256 " 248 " double face 1257 " 248 " single face 55 1257 " 248 " double face 140 1258 " 249 " single face 1 75 1268 " 249 '• double face 4 25 1259 " 249 " single face 125 1259 '» 249 «' double face 2 80 1260 " 247 " single face 60 1260 " 339 1261 Cresting on Ends of Building... 329 1262 Cresting 250 per ft. 2 25 1263 Cresting on Pavil- ions 328 1264 Shell 235 each 3 50 1265 Enrichment 264 per ft, 60 1270 Ribbon 232 each 60 1271 Ornament 232 " 60 1272 Ribbon 243 per pr. 35 1273 " 243 " 30 1274 Acorn 228 each 10 1275 Leaf 220 " 40 1276 " 223 20 1277 Acorn Cup 228 " 06 1278 Leaf 216 " 40 1279 " 212 " 25 1280 Ribbon 243 per pr. 30 1281 " 24:3 " 50 1283 " 242 " 1 00 1284 Flower 226 each 60 1285 Leaf 213 « 60 1286 Shell 234 " 1 25 1287 Leaf 216 " 1 75 1288 Modillion Front 246 " 50 1290 Ornament 232 " 10 THE KITTKEDGE COENICE AND OENAMEKT COMPAKY. DESIGN. PAGE. PKICE. 1291 Scroll 240 per pr. $1 50 1292 Shell 235 each 2 25 1293 Rosette 210 " 30 1294 Leaf 21(5 " 2 25 1295 Flower 227 " 40 1295 " 227 each complete 60 1298 Leaf 216 each 40 1299 Mod illion Front 246 " 25 1300 Leaf 212 " 23 1301 Ornament 232 " 05 1302 Leaf 213 " 45 1303 " 213 " 50 1304 Shell 233 " 27 1305 Leaf 212 " 35 1.306 " 213 " 50 1.307 " 213 40 1308 " 214 " 1 25 1309 " 217 " 4 00 1310 " 218 7 00 1311 " 212 '» 25 1.312 " 212 " 16 1313 " 212 " 20 1314 " 212 « 35 1315 " 216 '< 55 1316 " 213 " 45 1317 " 214 " 60 1.318 " 214 " 40 1319 *• 214 " 75 1320 " 213 «' 45 1.321 " 217 " 80 1322 " 214 60 1323 214 75 1324 " 214 " 90 1325 Bracket 224 " 30 1326 Leaf 214 " 1 25 1327 Scroll 238 per pr. 1 00 1329 Crocket 224 each 45 1330 " 224 " 1 60 1331 Leaf 213 « 25 1332 " 213 " 40 1333 " 212 : 40 1334 214 « 70 1335 " 224 '« 70 1336 " 224 " 2 25 1337 " 224 " 3 20 1339 Leaf 213 " 40 1340 " 212 " 08 1341 " 212.... " 15 1342 Shell 234 « 30 1344 " 219 « 06 1345 " 219 " 07 1346 219 " 08 1347 " 219 " 10 laiS 218 '« 30 1.349 " 213 " 60 1350 Crockett 224 " 20 1351 Leaf 223 " 05 1.352 Bud 225 " 05 1363 Stem 244 *' 07 1354 Leaf 215 «« 2 00 1.3.55 Scroll 239 perpr. 65 1356 Leaf 220 each 15 1.357 " 223 ; " 07 1358 Stem 244 " o7 1.359 Scroll 239 perpr. 130 1.360 l eaf 223 each 15 1361 Volute complete 223 " 30 1.361 " in halves 228 " 25 1362 Stem 231 '« 05 1363 Leaf complete 223. .. " 90 1363 " in halves 223 " 70 1364 Scroll 240 perpr. 1 75 1.365 " 240 " 1 50 1366 Ornament 232 each 06 1367 Shell 2.35 2 50 1368 Stem 244 " 06 1369 Scroll 240 perpr. 75 1370 " 240 " 1 50 1.371 241 2 75 1.374 " 241 " 1 .50 1376 " 241 " 1 35 1377 " 2.34 " 1 50 1378 " 241 " 1 25 1381 241 1 50 1382 Rosette 210 each 20 1383 " 211 " 1 25 1384 Ornament 232 " 35 1385 Scroll 237 perpr. 1 50 1386 Flute 246 each 30 1387 Rosette 211 " 60 1388 " 211 " 75 DESIGK. PAGE. PRICE. 1389 Shell 234 each 1 25 1390 Grotesque Foot 267 single face 1 00 1396 267 double face 2 50 1.391 Rosette 211 1 00 1.392 Leaf 212 a 40 1393 Ornament 232 in parts 50 1393 9;S2 complete 70 1394 I-eaf 220 each 20 13^5 Flower 226 50 1396 Scroll 237 perpr. 1 00 1398 Ornament 236 each 75 1399 Bud 225 30 1400 Scroll 237 perpr. 1 00 1401 237 60 1402 (( 237 . . . . (( 35 1403 237 45 1404 237 25 1408 Ornament 233 each $0 15 140!) Wi'eaih 233 20 1410 Scroll 236 per pr. 60 1411 (( 232 each 75 1412 Ornament 233 40 1413 Scroll 236 per pr 60 1414 232 each 1 10 1415 Bud 30 1415 (1 233 complete " 50 1416 Scroll 238 .... per pr. 1 00 1417 238 40 1418 « 238 (( 40 1419 Bud 35 1419 60 1421 Ornament 233 1 00 1422 <( ft 1 25 1423 233 )) 30 1424 Rosette 210 5J 30 1425 234 » 40 1426 (( 236 40 1426 Scroll 236 per pr 60 1426 236 per set 1 00 1427 Shell 234 per pr 50 1428 233 each 75 1429 '( . 233 75 1430 GriiBn 267 per pr. 7 00 1431 Cornucopia 267 2 50 1432 267 7 00 1433 Flute 246 10 1434 246 07 1435 Bud 231 each 10 1435 231 complete 25 1436 Torch 232 . each 75 1437 <( 232 >> 1 00 1438 Rosette 211 ,) 1 35 1439 Shell 2.34 jf 75 1440 Scroll 239 per pr. 1 00 1441 237 15 1442 Torch 232 each 45 1443 Ornament 232 30 1444 Scroll 238 per pr 85 1445 239 2 00 1446 Acorn 228 each 06 1447 Scroll 236 1449 240 per pr. 1 00 1452 Rope 255 per ft. 35 1453 Leaf 221 each 20 1454 221 15 1455 Acorn Cup 228 >) 04 1456 Leaf 221 >> 12 1457 jj 221 J) 12 1458 )> 221 jj 23 1459 j> 221 ... 18 1460 221 M 15 1461 221 18 1462 > 220 15 1463 >> 221 >J 25 1464 Fruit 229 >> 45 1465 228 >> 07 1466 229 >> 85 1467 » 229 25 1468 >> 229 J> 75 14()9 >> 228 J> 30 1470 » 228 M 35 1471 >5 30 1472 Leaf 220 20 1473 Fruit 229 5> 65 1474 )> 228 25 1475 5> 228 >> 40 1476 J> 229 >> 45 1478 Corn 229 J> 50 1479 Leaf 220 18 1480 Bud 225 J> 20 1481 Fruit 228 40 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. 1482 I4s;3 14K1 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 J 500 1501 1502 1502 1502 1508 im 1506 1507 l! 09 1510 1511 1511 1512 1513 1514 1514 1514 1514 1515 1516 1517 1518 iri9 1520 1521 1522 152:3 If 24 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 i542 1543 1544 1545 1546 1547 1548 1549 1550 If 51 1552 1554 1554 1555 1555 1556 1582 1582 1593 1594 1595 1596 1597 1598 1599 1600 1601 Fruit Leaf Fruit fruit Bud Rosette Scroll Leal" Wheat Loaf Stem Torch Tip Scroll Rosette 2 iti. Star 4iu. " 6 in. '* Rosette Bud Rosette 2>^ in Rosette 4 in. Rosette 5 in. Rosette 6 in. " 7 in. " 9 in. " Rosette Boot Bud Rose Leaf Corn Flower Rosette Flower Rosette Reed Leaf Ornament Leaf Ornament Leaf Ribbon Shell Stem Leaf a Frame Leat Shell Leaf complete " in halves complete " in halves Scroll Console )» S))un Front Frulfc Garland Flower Garland Laurel Garland Rosette Face Head PAGE. 228 220 " 228 " 228 each 225 " 209 " 238 per pr. 219 each 219 '* 219 " 229 per pr. 219 each 221 " 221 219 " 242 231 " 231 " 236 per pr. 211 each 209 " 209 " 209 " 209 " 225 " 211 " 209 » 209 " 209 " 209 » 209 " 209 " 210 " 210 " 21( " 210 " 210 " 210 " 211 " 210 " 210 " 209 " 209 " 210 , " 211 " 211 " 226 " 210 " 209 " 266 " 225 " 226 " 220 " 220 " 229 " 227 " 210 " 228 " 210 " 226 " 215 " 215 " 217 " 217 " 216 " 215 " 242 " 235 " 244 per pr. 244 " 215 each 1 215 " 2 268 50, with back " 212 " 2:34 " 3 223 " 223 " 222 223.. " 236 per pr. 1 269 .e«ch 8 269with<.ut bouquet. " 7 287 See page for prices. 288 " " " " each $0 35 35 20 10 65 08 08 r8 50 08 30 35 10 35 60 12 60 50 03 05 10 06 10 10 15 10 10 05 10 10 20 17 25 30 50 25 10 45 40 12 07 45 00 75 25 25 12 00 40 75 20 ?0 80 80 30 75 50 60 50 00 70 50 00 50 50 50 50 45 25 00 70 35 50 20 15 15 10 25 00 50 325 324 331 209 2.30 239 each 1602 1604 1605 1606 1()07 1608 1609 1610 1610 1611 1612 1613 1614 1615 1616 1617 1622 1625 1626 1627 1628 1629 1630 1631 1632 1633 1633 1633 1633 1633 1633 1633 1633 1633 1633 1633 16:33 1633 1633 16:33 16:33 1633 1633 1633 1633 1633 16:i3 ia33 1635 1636 1637 1639 1640 1641 1642 1643 1643 1644 1645 1646 1649 1650 1651 1652 1653 1653 1654 1P55 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 Head Eagle Feather Rosette Stem Wpather Vane Ribbon Scroll Ribbon Drapery- Ribbon 2:30. 2:30. 230. each 2:30 " 1 2:30... » 7 266 " 30 333 249 per pr. 246 " 1 246 each 246 " 246 " 209 " 945 " 265 " 15 242 per pr. 1 2:37 » 242 each 243 per pr 242 » 242 each 1 242 per pr. 242 " 1 in. Spun Zinc Half Ball . IK 2 " 3 " 5 " 5K ;; 6 " 6K 7 " 7K 9 10 11 12 13 14 15 16 17 Finial Ribbon Baluster Acorn Cup Acorn Urn Leaf Stem Finial Stem Urn n stem Finial Stem Baluster Finial Leaf Stem Leaf Stem Bud Leaf 338..., 338 339 242 each 281 See pa/ie for prices. 228 each 228 '* 284 in parts, " 284 complete " 222 " 220 " 222 " 244 " 245 " . . . " 245 " 285 in parts, " 2P5 complete " 245 " 253 " 245 " 283. 254. 221. 222. 245. .See page for prices. each 16 244 per pr. 245 each 245 " 245 " 245 " 244. '. per i)r . 244 each 222 244. 244. 244. 225. 225 222 50 03 05 50 25 10 30 60 08 40 00 40 00 50 30 00 45 00 25 75 40 70 65 25 75 20 80 10 25 35 50 25 15 12 10 35 THE KITTREDGE CORKICE AKD ORNAMENT COMPANY. DESIGN. PAGE. PKICE. 1677 Leaf 222 each ^0 18 1678 222 " 15 1679 Baluster 282.. . See page for prices. 1680 282.. 1681 281.. " 1682 8 in. Spun Mortar 286 . 1682 12 in. " 286. . " 1682 18 in. " 286. . 1683 JLeaf 223 each 75 1684 222 " 75 1685 )> 222 40 1686 " 220 J) 65 1687 222 >> 40 1689 Bud 225 >> 25 1690 Grapes 229 25 1691 Bud 226 >> 20 1692 Leaf 220 25 1693 Flower 60 1694 Reed 229 30 1695 Flower 227 60 1695 " 226 per pr. 1 20 1696 Leaf 220 each 20 1697 220 25 1698 220 " 15 1699 Bud 225 03 1791 Horse 265 6 00 1701 265 without base " 5 50 1702 Bud 225 06 1703 Leaf 219 15 1704 " 219 20 1705 " 219 08 1706 219 10 1707 05 1708 (.6 1709 L>Og 265 3 00 1710 Leaf 222 10 1711 FloAver 226 J5 1712 Bud 225 05 1713 Stem 245 35 1714 Rosette 08 1715 Stem 245 20 1716 244 > J 06 1717 244 If 06 17 18 244 )) 07 1719 Flower 226 >> 25 1720 Rose 226 >j 55 1721 Scroll 237 per pr. 25 1722 239 1 25 1724 Ornament 231 comple e each 80 1724 231 60 1725 Stem 244 07 DESIGN. PAGE. p 1727 Stem 245 each 1728 Capital J) 1729 278 . 1730 " 273 . ^1731 " 272 , . 1732 275. . 1733 " 274. . 1734 " 276 . . 17.35 272. . 1736 275. . " 1737 " 278. . 1738 279 1739 Circular Panels 326 1740 Frame 268 each 1740 268 with back, " 1741 Oak Spandrel 342 1742 343 1743 Ivy Spandrel 341 1744 Rose Spandrel 341 1746 Candelebrum 1747 Shield 1748 Capital 339 1749 271 . . For prices see page. • 1750 279 . . 1753 271 . . 1754 271.. 1754 271.. 1754 271.. 1754 271. . 1755 276.. 1756 273 . . 1757 277. . 1758 274.. 1761 Spandrel Orn't 1762 Date Tablet 316 1763 Cornice in Lge Picture Gallery 334 1764 Spandrel Orn't 320 1763 Pedestal top of Dome 333 1766 Details Van Wert Court House 850 1767 Spandrel Orn't 318 1768 Upper Cornice ol Dome 332, 1770 Small Trophy 345 1771 Top of Flag Staff 1772 Large Trophy 346 1774 Finials on Turrets344 1776 Spandrel Orn't THE KITTREDGE CORNICE AND ORNAMENT COMPANY. INDEX TO MODILLIONS, BY DESCRIPTION AND DESIGN NUMBERS. Design. Face. Sides. 750 Plain Plain 134 T60 " Plain, with Stamped Ornament 185 761 " Plain, with Sunk Panel i:}() 762 " Plain, with Sunk Panel and Stamped Ornament 137 763 " Plain, with Incised-work 138 764 Plain, with Leaf Plain 13'.) 765 " " Plain, with.Stamped Ornament 14U 766 " " Plain, with Sunk Panel 111 767 " " Plain, with Sunk Scrolled Panel and Stamped Ornament 142 768 " " Plain, with Incised-work 143 769 Plain, with Square Sink and Leaf Plain 144 770 " " Plain, with Stamped Ornament 145 771 " " " Plain, with Sunk Panel 146 772 " " " Plain, with Sunk Scrolled Panel and Stamped Ornament 147 773 " " " Plain, with Incised-work 148 774 Sunk, with Leaf Plain 149 775 " " Plain, with Sunk Panel 150 776 *' " Plain, with Sunk Scrolled Panel and Stamped Ornament 151 777 " " Plain, with Incised-work 152 778 Moulded throughout Plain 153 779 " Plain, with Sunk Panel 154 780 " Plain, with Sunk Scrolled Panel and Stamped Ornament 155 781 " Plain, with Incised-work 156 782 Spun Roll and Square Sink, with Leaf Plain 157 783 " " " Plain, with Stamped Ornament 158 784 " " " Plain, with Sunk Panel 159 785 " " " Plain, with Sunk Scrolled Panel and Stamped Ornament 160 786 " " " Plain, with Incised-work 161 787 Plain Plain, Voluted 162 788 Plain, with Square Sink and Leaf Plain, Voluted and Incised 163 789 Plain, with Sq. Sink and Leaf, and Incised Drop. .Plain, with Sunk Panel 164 790 Plain, with Leaf and Incised Drop Plain, Avith Incised-work 165 THE KITTEEDGE COEKICE A]SrD ORI^AMENT COMPANY. INDEX TO BRACKETS, BY DESCRIPTION AND DESIGN NUMBER. Design. 791 Plain. Faoe. 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 Plain, with Leaf. Sides. ■ Plain .Sunk Panel Sunk Scrolled Panel .Plain Plain, with Leaf and Square Sink. Plain, with Leaf and Rosette Plain, with Leaf and Rosette and Square Sink. Plain, with two Leaves. Plain , and Square Sink 830 Plain, and Square Sink, with Leaf. 831 " 8:34 835 " 836 Plain, with Rosette and Square Sink, with Leaf. 837 839 840 " 841 " 842 Plain, and two Square Sinks. 843 " 844 " 845 . " 846 847 " . .Plain, Tfith Stamped Ornaments • Sunk Panel .Sunk Scrolled Panel ..Sunk Scrolled Panel, with Stamped Ornament .Incised .Plain .Plain, with Stamped Ornament .Sunk Panel ..Sunk Scrolled Panel .Sunk Scrolled Panel, with Stamped Ornament .Incised .Plain .Plain, with Stamped Ornament .Sunk Panel . Sunk Scrolled Panel .Sunk Scrolled P^nel, with Stamped Ornament .Incised .Plain .Plain, with Stamped Ornament .Sunk Panel .Sunk Scrolled Panel .Sunk Scrolled Panel, with Stamped Ornament .Incised Plain .Plait, with Stamped Ornament ..Sunk Panel .Sunk Scrolled Panel ..Sunk Scrolled Panel, with Stamped Ornament .Incised , .Plain r .Plain, with Stamped Ornament . Sunk Panel .Sunk Scrolled Panel .Sunk Scrolled Panel with Stamped Ornament .Incised .Plain .Plain, with Stamped Ornament .Sunk Panel .Sunk Scrolled Panel Sunk Scrolled Panel, with Stamped Ornament .Incised .Plain .Plain, with Stamped Ornament Sunk Panel Sunk Scrolled Panel Sunk Scrolled Panel, with Stamped Ornament .Incised Plain .Plain, with Stamped Ornament . Sunk Panel .Sunk Scrolled Panel Sunk Scrolled Panel, with Stamped Ornament Incised Page, 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 THE KITTREDGE CORNICE AND ORNAMENT COMPANY. Design. Face. Sides. Page. S48 Sunk Plain 85 840 " Plain, with Stamped Ornament 86 850 " Sunk Panel 87 851 " Sunk Scrolled Panel 88 852 " Sunk Scrolled Panel, with Stamped Ornament 89 853 " Incised 90 854 Sunk, with Leaf - Plain 91 855 " " Plain, with Stamped Ornament 92 85G " " Sunk Panel 93 857 " " Sunk Scrolled Panel 94 858 " " Sunk Scrolled Panel, with Stamped Ornament 95 859 " " Incised 96 860 Sunk, Avitli two Leaves Plain, with Stamped Ornament 97 8(51 " " Sunk Panel . . . 98 862 " " Sunk Scrolled Panel 99 863 " " Sunk Scrolled Panel, with Stamped Ornament 100 864 " " Incised 101 865 Double Sunk ... : Plain 102 866 " Plain, with Stamped Ornament 103 867 Sunk Panel 104 868 " Sunk Scrolled Panel 105 869 " Sunk Scrolled Panel, with Stamped Ornament 106 870 " Incised 107 871 Plain, with Leaf and Spun Roll Plain, with Stamped Ornament 108 872 " «♦ " Sunk Panel 109 873 '• " *' Sunk Scrolled Panel, with Stamped Ornament 110 874 " " « Incised Ill 875 Plain, and Spun Roll; Square Sink, with Leaf Plain, with Stamped Ornament 112 876 " " " " Sunk Panel 113 877 " " " " Incised 114 878 Plain, and Moulded; Square Sink, with Leaf Sunk Scrolled Panel, with Stamped Ornament 115 879 Plain, and Spun Roll; Square Sink, with two Leaves Plain, with Stamped Ornament 116 880 Plain, with Lraf; Square Sink, with Leaf ; Spun Roll Sunk Panel 117 881 " " " " " Incised 118 882 Plain, with Leaf ; Sq. Sink, with Leaf ; Spun Roll, Moulded. .Sunk Scrolled Panel, with Stamped Ornament 11!) 883 Plain, and Moulded; Sq. Sink, with Leaf, and two Incised Mitred Drops Incised 120 884 Plain, Square Raise, and Double Square Sink Incised 121 885 Plain, Square Raise, and Square Sink Plain, with Stamped Ornament 122 886 Plain, with two Square Raises; Cusped Incised 123 887 Plain, with Plain Mitred Drop Incised 124 888 Plain, with Leaf, and Plain Mitred Drop Plain, with Stamped Ornament 125 889 Plain, with Plain Mitred Drop, and Square Sink, with Leaf Sunk Panel 126 890 Plain, with Leaf and Plain Mitred Drop Sunk Scrolled Panel 127 891 Plain, with Leaf and Shell-work ; Plain Mitred Drop Voluted 128 892 Plain, with Leaf; Plain Mitred Drop, and Square Sink. . . . Voluted and Incised 129 893 Plain, with Leaf, and Square Sink, with Shell-work Sunk Panel 1-^0 894 " " " " Voluted 131 895 " " " Incised 132 896 Plain, with Leaf and Flutes Incised 133 12