B OF THL UNIVLR.SLTY or G30.7 AGRICULTBRi NON CIRCULATING CHECK FOR UNBOUND CIRCULATING COPY SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS By Helen E. McCullough and Mary B. Farnham JLLETIN 661 DIVERSITY OF ILLINOIS AGRICULTURAL EXPERIMENT STATION CONTENTS METHOD OF STUDY 3 THE SUBJECTS 5 WHEELCHAIR AND BODY MEASUREMENTS 6 MANIPULATION OF CHAIR 8 REACHES 12 WORK HEIGHTS AND CLEARANCES 17 EASE-OF-USE TESTS 20 KITCHEN-LAYOUT TESTS I 30 SUMMARY AND CONCLUSIONS 36 LITERATURE CITED 38 APPENDIX A EQUIPMENT USED IN THE RESEARCH 38 APPENDIX B MENU AND PROCEDURES FOR TESTING KITCHEN LAYOUTS 41 APPENDIX C MEASUREMENT AND PREFERENCE DATA FORMS . . .42 The authors gratefully acknowledge the cooperation of Katherine Niemeyer, former student in home economics, who served as a subject in the pilot study for this research. Urbana, Illinois June, 1960 Publications in the Bulletin series report the results of investigations made or sponsored by the Experiment Station SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS By HELEN E. McCuLLOUGH and MARY B. FARNHAM* ALTHOUGH THERE ARE NO ACCURATE STATISTICS OH the number of women in the United States who are confined to wheelchairs, it is known that there are about 7i/2 million orthopedically handicapped women (5), 2 many of them in wheelchairs. Some are wage earners and many are homemakers. A common need for all is to be useful, contributing members of their homes and communities. Many work-simplification studies applicable to a variety of activ- ities have been made for the orthopedically handicapped and for low- energy groups, such as cardiac and tuberculosis patients. Child-care problems have received special attention. Research has also been done on clothing design for adults and children, both from the self-help standpoint and in relation to fabric and construction methods (1). But very little has been published to provide authoritative data on household space dimensions for the disabled. There is a great need for house designs and kitchen and work-area arrangements for the handicapped, based on research findings, which provide definite dimen- sions for circulation space, range of access for storage, clearances for knees and chair arms, and comfortable work heights. The study re- ported here was undertaken to help supply this need, with particular emphasis on kitchens adapted to women in wheelchairs (see Figs. 1 and 2). METHOD OF STUDY The special program for disabled students at the University of Illinois, with its opportunities and facilities for education and rehabili- tation, provided a strong incentive for this research. At the time the study was started there were 45 physically handicapped women on the campus, 30 of them confined to wheelchairs. Twenty of these women volunteered to be subjects for the research. Six women volunteers in the community brought the total number of subjects to 26. The study was conducted at the housing research laboratory of the 'HELEN E. MCCULLOUGH, Associate Professor of Home Economics; MARY B. FARNHAM, Assistant in Home Economics. 2 Numbers in parentheses refer to literature citations on page 38. BULLETIN No. 661 (JUNE, The need for authoritative information on kitchen space and design require- ments for women in wheelchairs is graphically illustrated here. Above is a standard sink cabinet, 36 inches high, with no open space for knees. Below is the sink tested in this research, specially designed for women in wheel- chairs. (Figs. 1 and 2) I960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 5 Department of Home Economics. The tests that were made and the data that were collected 1 can be divided into seven categories: 1. Personal data were collected for each subject. 2. Measurements were made of the wheelchairs and of the subjects seated in their chairs. 3. Space requirements for maneuvering the chairs were determined. 4. Vertical and horizontal reaches of the subjects were measured. 5. Comfortable working heights and necessary clearances of work areas were determined. 6. Kitchen and laundry appliances and cabinets of various designs were tested for accessibility and ease of operation. 7. Three kitchen layouts, incorporating the measurements deter- mined from the above tests, were set up and tested. Details on the testing and measuring equipment used are given in Appendix A (pages 38 to 40). Measurements that were taken in centimeters were later converted to inches. Measurements requiring the use of movable panels were made according to the methods used in the Illinois space requirement studies (2). In the present study, three dimensions were used height, width (side- to-side measurement), and depth (front-to-back measurement). THE SUBJECTS Of the 26 subjects, 20 were students and 6 were women in the community. Of the latter group, 2 were full-time homemakers, 2 were employed full time and living with parents, and 2 were carrying the double responsibility of employment and homemaking. Most of the subjects had had some cooking and home-management experience and several had been doing all their own housework for many years. Five of the students married and set up homes during the year following the beginning of the tests. The subjects ranged in age from 18 to 81 years, with 46 percent in the 20-to-30-year age group. The causes of disability and the num- bers having each were: poliomyelitis, 21; neuromyelitis, 1; muscular dystrophy, 1; accidental spinal injury, 1; congenital spinal defect, 1; and amputee, 1. One additional woman with arthritis was measured but her range of motion was so limited that it was felt that she should not do house- work and her measurements were eliminated from the final results. 1 Forms used in recording data are given in Appendix C (pages 42 to 47). BULLETIN No. 661 (JUNE, The duration of disability ranged from 3 to 28 years and averaged 9}/2 years. All the subjects were in good health except for their dis- abilities, although their strength, control, and balance varied greatly. All but one of the subjects were normally right-handed. Twelve had good use of both arms, 4 had fair use of both arms, 8 had better use of the left than the right, and 2 had better use of the right than the left. The subjects were all well adjusted to their handicaps and were intensely interested in contributing to the research by serving as subjects. WHEELCHAIR AND BODY MEASUREMENTS Wheelchair dimensions are given in Table 1. All subjects used Standard Universal models of chairs made by three different com- panies, 23 of which came from one major .manufacturer. The similar- ity of the chairs was an advantage as far as the research was concerned because it reduced one of the variables. The Standard Universal chairs, which are metal folding chairs with a fabric seat and back, are recom- mended by the Student Rehabilitation Center at the University of Illinois because they provide a maximum of mobility, strength, and performance at a reasonable cost. It is recognized, however, that some individuals may require a more rigid back for support than can be obtained with the sling back of the folding chair. DESK ARM Desk arms permit a closer approach to work spaces than standard arms, but many persons require the added support and protection of standard arms (Fig. 3) 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS ^ww^w-/^ O "O O p O 10 OOOOOCN O *r> p p p ""> 10 ON ^ O u ^O OO OO t~* O OO OO OO O O OO OO "O ts 10 t" 00 *"*- ^ **** "^ ""> ^ o ^ "^ ^ . _* Os 3 . ^ fl < ^^^^^^^ ^^^^^^ ^^^^. _ ^ ^ _ W iOO>OOOOO OOOOOO OOOiOOO CNI 4J J~~ OO O 00 OO OO OO OO OO t~- OO OO OO OO OO OO OO OO OO OO OO ^O OO OO OO OO O .0 6 N C 9 S * rt . O. to IO >O OO IO >O CN IO O OO OO O O >O ^ O tN IO CS >O OO ^ OO OOOOOOOvO OvOOOOO^OOOs OOOOOOOOOOOO OOvOOOOOOOOOO 00 ^j'O Jg QOOOioOes cs O -* O >o O O O oo O ""> O ""> o -I 5 OltSCNCSCNCNCS CNCNCNCSCSCN CNCSCSCNCSCN CSCSCSCSCNCNr^ CN ^, . , O0 O 10 t A 00 O .' ^H V J5 J3 .0 rf >^- t^l ^.^ "/ ^, >O IO fS IO IO O 'O O CS O ^N OO CS ^3 CN C? 1^5 Ol CS C^ t^ -s\ CN " ^^ ^ O\ f ON O ON OO OO OO ON OO OO t^- O\ O ON Os ON OO O\ CS CN CN I . ._ - . OOOOOO V T3 ; to 41 ^ rt 10 c^ CO <*5 f*5 J.S f*5 -fi w cotn.cDtainin m W W v V V 4r W 4J OOOOOO OOOOOOO g-g-g rt cd cd ,T3-OT! TJTJ -OT3 -OT3-aT3T)T3 "O T3 TJ T3 13 TD TJ - ~^ ctfcd cdcdcdcOc^cd ,0-0 K..-OT: -a-OTJTJ-a-o ;cc-rscc cccccc , c^ Q O ""> O O O rt< o co "3 r*~ t^~ T i ON ON 10 CM O IO -i -H CN Tti IO ^ ON (M O 00 * 10 ^H O CN 3 I J3 M o h * >o C O) _1 Cfi C 4>> NOOO 00 OO O "-* -^0-NOON -ONO^-CN CN^OONOCN^ * CN CN CS CN CS (M * so ro NO "0 NO CN CN CN CN CN CN NO ro ro -i NO <* NO CN CN CN CS CS CN CN IO CN O CN 00 CNIOONOO^O ^SO^HCNVO^ 000 CN 00 100 SOOCNCNOCNO CN t~ rvi be t^ ^ r* to to to *O ir :r -= ^ ir = IO t <*5 NO * >O i^J ^| fy-, ^| J^. ^J, 1^5 IO 1 CH CN Ol CN CN CN CN CN CN CN CN CN CN CN CN CN CN CN CN CN CN CN CN CN CS CN CN CN CN re CN ^j r* ON CO NO t- ^ CO n O O * PO ^ O CN t^ O tO CN *-H Tj< t^- NO | -t "IS ro t O <*5 Os so OO -i ON OO O OO O ^ ON NO OO ON iO >O ON t^ OO ON 1 IM >-J T^< ro T^< ^ f> re ro <* f) rO -^ <"5 Tf Tj< ro fO "* Tf ro re fN ^f O ON re t-~ "O ON Tj< Tt NO J^ ^< O 00 t- so t- re so ^ * o r^i o.- i/-. ir >-"-'- ^ i ^, ^ p^, ^ H ,_, ^ ^< iO c*5 ro CN re CN O CN IO ^H CN ^l fj 1 P-H " ~ Q i-t tN CN CS CN CN CN CN CN CN CN CN CN CN CN CN CN >O re O *~~ OO ^< ON NO iO W I H ^f OO ON ^ l~~ IO NO "1 ro so ^ti NO ^ H ^^ ^J 1 Tj^ ^f T^ OO * CN t~ J-~ CN NO O "H iO t CN 10 O * re o ^ CN g ^ Or>Oo*ooo IO CS OO OO "0 O iOO OOCNO coOiOOOOO 00 n .B iti l-~ 10 t-~ OO * i tN ro ro f> PO ro ro fj -rt< 10 -H ^ CN IT) fj CO ro <*5 PO r<^ uo re '-i ro -^ OO ro re fj CO ro CN ^^g^^^ ?e 0. oo es O o 3< IO ON fS PC OO t^ O ID Tf IO "^ ^f rj< IO O O^ O 00 O 1C IO "t 10 ^t< u-) CN O NO '-i O sO 10 10 rf 10 IO Tf O ^ >O OO CN tO O iO rf -^f Tj< iO Tj< 10 O\ T< I IO 4_} 0) O bfi y 4> M bo 'n* -( CM m -^ 10 NO t-~ 00 ON O '-i CN re Tf iO so r 00 ON O '-i CN re rj< 10 so g C J) CN CN CS CN CN CN CN 1 f3 Pi 10 BULLETIN No. 661 (JUNE, The space required to make a complete turn was determined by boxing the subject within three 48-inch-wide movable panels and a stationary wall. Maneuvering the chair as she usually would, the subject turned it around completely, both clockwise and counterclock- wise, pushing out the panels with the footrests as needed. The rec- tangle was then straightened by the observer and the whole procedure tried again before the dimensions were recorded (Fig. 7). While there was great variation in the body measurements of the subjects, there was much less variation in the amount of space needed for passing through doors and corridors (Table 3). For moving the chair in a straight line the necessary width of space ranged from 32 Table 3. Adequate Space Requirements for Manipulating Chair Adequate width Subject for chair at rest 8 Adequate width for moving in a straight line Adequate space for complete turn Width and length Total area inches inches inches square feet 1 30 33 55x64 24 2 29 34 57x64 25 3 29 35 58x62 25 4 29 38 60x64 27 5 28 33 59x60 25 6 28 33 62x65 28 7 30 36 60x66 28 8 30 36 64x66 29 9 31 36 56x65 25 10 27 33 55x57 22 11 28 33 56x66 26 12 30 36 54x69 26 13 28 33 57x60 24 14 27 34 51 x65 23 15 26 33 53x63 23 16 28 34 55x59 23 17 28 34 53x58 22 18 28 33 56x66 26 19 33 36 52x67 24 20 26 35 54x66 25 21 27 32 55x67 26 22 26 33 50x63 22 23 27 35 59x76 31 24 31 36 60x64 27 25 31 35 53x65 24 26 27 32 62x63 27 Average b 28 34 56x64 25 Range 26-33 32-38 50-64 x 57-76 22-31 a Hands positioned for movement. b Adjusted to whole numbers. 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 11 Movable panels were used to determine the space necessary to move in a straight line. (Fig. 6) To test the space needed for turning around, the subject was boxed within three movable panels and a stationary wall. (Fig. 7) 12 BULLETIN No. 661 (JUNE, to 38 inches and averaged 34 inches. The complete turn required an area averaging 56 x 64 inches, with a range of from 50 inches in one direction to 76 inches in the other. The subjects maneuvered their chairs differently but all were very adept and apparently accustomed to adjusting their movements to limited spaces. REACHES Vertical reaches. To determine maximum vertical reach, the sub- ject made three different approaches right, left, and straight ahead to a panel on which paper had been mounted. Holding a pencil close to the point and perpendicular to the panel, she made a short arc at the uppermost and lowermost points that she could reach. In the straight approach she made the reach with her "best" hand. Vertical reaches were further tested by having the subject place an object or stack of plates on a shelf in each of the following units: continuous open shelves, full-height storage unit with doors, upper storage over base cabinets, and upper storage over an open counter. To facilitate checking measurements, a scale was attached to the edges of the cupboards. For testing reaches into continuous open shelves (left) the adjustable shelf was raised until the maximum comfortable reach was obtained. Maximum reach into a full-height storage unit with doors (right) was tested by having the subject place an object on the highest accessible shelf. (Figs. 8 and 9) 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 13 On the theory that the approach which the subject considered best was the one that she would use at home, a condensed table was drawn up, showing maximum reaches from each subject's best approach only (Table 4). A straight approach to any storage unit was rarely chosen unless there was open space under the counter. Vertical reaches in general were greatly influenced by balance and by strength and control of arm, shoulder, and back muscles. Few of Table 4. Maximum Reaches Above Floor Level, Using Best Approach and Best Hand Subject Vertical panel Con- tinuous open shelves, 12" deep a Continuous shelves with doors b Upper cabinet, 12" deep, over base storage, 24" deep a Upper cabinet, 12" deep, over open counter, 24" deep* Interior, 9" deep Door, VA" deep 30"- high base 36"- high base inches 1 69 56 68 70 58 56 2 63 52 56 61 47 48 46 3 55 48 54 48 50 4 69 56 58 69 52 54 5 62 54 56 61 49 50 6 61 48 54 60 47 48 7 65 54 60 64 50 54 56 8 64 54 58 64 49 52 52 9 60 52 58 64 49 48 44 10 61 48 60 61 44 44 11 60 50 54 54 48 48 12 63 54 56 58 50 52 52 13 62 52 56 61 43 46 14 68 56 65 65 54 56 15 65 54 60 60 49 52 16 57 48 54 60 44 44 17 66 56 63 65 50 54 18 62 52 56 61 41 46 19 60 52 58 61 39 42 50 20 48 54 54 62 51 52 50 21 57 44 54 58 37 42 22 59 50 54 58 43 44 23 57 48 54 59 44 44 43 24 64 50 43 46 25 59 47 54 54 39 42 26 63 52 60 64 50 50 Average 6 62 52 57 61 47 49 49 Range 48-69 44-56 54-68 54-70 37-58 42-56 43-56 a Subject reached into back of shelf. h Subject reached into front of shelf. c Adjusted to whole numbers. 14 BULLETIN No. 661 (JUNE, the subjects ever used both hands for reaching, most preferring to place stacked dishes one at a time, using the other hand to maintain balance. All the subjects could pick up objects from the floor and had good access to lower storage in shallow cabinets, using one hand to reach the object and resting the other hand on the chair arm for support. Continuous open shelves. To test maximum reach into continuous open shelves 12 inches deep, the subject made the three approaches to an open-shelf unit and placed a glass at the back of the shelf (Fig. 8). Those who could, also placed a stack of six plates with both hands on the shelf. The adjustable shelf was raised until the maximum comfortable reach was obtained. Reaches into the shelves ranged from 44 to 56 inches and averaged 52 inches (Table 4). Full-height storage unit. Reaching into a full-height storage unit with door shelves was tested by having the subject approach the cup- board, open the doors, and remove an object from and replace it at the front of the highest accessible shelf in both the interior and door (Fig. 9). Reaches into the interior, which had shelves 9 inches deep, ranged from 54 to 68 inches, averaging 57 inches (Table 4). Reaches into the door shelves, which were 2i/2 inches deep, ranged from 54 to 70 inches, averaging 61 inches. Upper storage over base cabinets. Reaching into upper storage over 30-inch-high and 36-inch-high base cabinets was measured in the same way as for open shelves except that only the side approaches were used (Fig. 10). In testing these reaches it was found that many of the subjects could reach farther over a 36-inch-high base than over a 30-inch-high base (Table 4). This was because they used one arm for support and leaned on the base cabinet as they reached. Over a 30-inch base, reaches ranged from 37 to 58 inches with an average of 47 inches; over a 36-inch base, reaches ranged from 42 to 56 inches with an average of 49 inches. Upper storage over open counter. The research was well under way when it was decided that information on reaches into upper storage over an open counter would be desirable. Eighteen subjects had already been tested, so it was decided to conduct the tests for this storage unit with the eight remaining subjects. For testing reaches into upper storage over an open counter, the counter was first adjusted to a comfortable working height. A cabinet with an adjustable shelf was placed on top of the counter and the subject, using the straight approach, placed a glass (or stack of plates) 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 15 Reaches were tested into upper storage over base cabinets (left) and over an open counter (right). Few subjects were able to reach with both hands, most preferring to reach with one hand while using the other hand for balance. (Figs. 10 and 11) Horizontal reaches of both arms averaged 51 inches in width and 21 inches in depth. (Fig. 12) 16 BULLETIN No. 661 OUXE, Table 5. Maximum Horizontal Reaches Subject Total width 8 Depth inches inches 1 54 18 2 46 18 3 46 26 4 55 23 5 43 16 6 50 24 7 57 23 8 54 24 9 50 22 10 44 18 11 59 26 12 50 22 13 43 18 14 64 24 15 64 21 16 54 24 17 63 21 18 52 24 19 53 21 20 42 20 21 47 20 22 50 15 23 44 18 24 40 18 25 52 22 26 47 20 Average b 51 21 Range 40-64 15-26 a Combined reaches of both arms. b Adjusted to whole numbers. at the back of the shelf (Fig. 11). The shelf was raised until the maximum reach was obtained. Of the eight subjects who were tested, reaches ranged from 43 to 56 inches, averaging 49 inches. Horizontal reaches were measured by first placing the adjustable work table at a comfortable height and covering it with white paper. The subject held a pencil close to the point and perpendicular to the surface. Holding her body as erect as possible and her elbow stiff, she drew a wide arc with each hand (Fig. 12). The tests for horizontal reaches showed that the width of accessible work counter space from a fixed position varied from 40 to 64 inches with an average of 51 inches (Table 5). Depths varied from 15 to 26 inches with an average of 21 inches. (A work counter of normal 24- inch depth would provide extra "setting" space for equipment.) I960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 17 WORK HEIGHTS AND CLEARANCES Work heights. To determine comfortable working heights, the subjects performed jobs at work counters, electric mixer units, sinks, and ironing boards. For testing work-counter heights, the subjects used a hand mixer and a rolling pin. The counter was adjusted to obtain the comfortable height (Fig. 13). An electric mixer unit, adjustable to varying heights, was tested by having the subject open it, adjust it to the most comfortable height, and close it. Comfortable working heights for the sink were obtained by having the subjects scrub a plate with a brush and transfer dishes from one sink bowl to the other. The sink was raised or lowered until the subject considered the height good (Fig. 14). Table 6. Comfortable Work Heights Subject Work counter Electric mixer unit Sink Ironing board inches 1 27 27 31 31 2 26 26 30 26 3 26 26 31 26 4 29 28 35 32 5 26 26 32 30 6 26 24 30 25 7 27 26 30 29 8 26 26 31 26 9 26 26 30 26 10 24 24 30 28 11 25 24 30 24 12 27 26 30 27 13 26 26 31 28 14 26 24 32 28 15 26 24 30 28 16 24 24 30 26 17 27 28 31 28 18 28 24 30 28 19 26 24 30 27 20 26 24 30 27 21 24 24 28 24 22 26 24 30 26 23 28 26 31 30 24 26 24 32 27 25 26 26 30 26 26 26 26 30 30 Average" 26 25 31 27 Range 24-29 24-28 28-35 24-32 Adjusted to v.liole numbers. 18 BULLETIN No. 661 (JUNE, I An adjustable ironing board supporting a counter top was used to determine comfortable work-counter heights. (Fig. 13) A sink with block feet adjustable at 1-inch intervals was used to determine comfortable working height. (Fig- 14) 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 19 The subject simulated the ironing process with an adjustable iron- ing board and a lightweight iron. She adjusted the board herself until the height was correct. Comfortable work-surface heights varied considerably among sub- jects and also according to the activity being tested (Table 6). The average heights, in inches, were: hand mixing, 26; electric mixer, 25; sink, 31; and ironing, 27. Clearances under sinks and counters were determined by the chair dimensions and the height of the knees or thighs. Vertical clearances averaged 30 inches for chair arms and 24 inches for knees (Table 7). Table 7. Vertical Space Requirements Under Counters, Including Clearances Subject Chair arms Knees inches inches 1 30 26 2 28" 26 3 31 25 4 31 24 5 30 24 6 29" 23 7 29* 27 8 29* 25 9 30 24 10 29 23 11 29" 22 12 28 22 13 30 25 14 31 25 15 30 26 16 30 24 17 30 24 18 29 23 19 30 24 20 31 23 21 27 21 22 28 23 23 27 26 24 30 22 25 30 23 26 30 25 Average b 30 24 Range 27-31 21-27 For certain operations the five subjects whose chairs had desk arms required only enough clearance for the low part of the desk arms (see Fig. 1). These clearances were as follows: Subject 2, 23 inches; Subjects 6 and 7, 24 inches; and Subjects 8 and 11, 25 inches. b Adjusted to whole numbers. 20 BULLETIN No. 661 (JUNE, Most sink bowls are too deep to allow for both adequate clearance and comfortable working height. For this reason a special sink, with each bowl 5 inches deep, was made for the cabinet used in the kitchen- layout tests. In determining the overall height of the unit, construc- tion requirements as well as necessary clearances had to be taken into consideration. The width of the open space under a sink or counter needs to be greater than the actual width of the front wheels or casters. Because of the chair's swiveling action, ample clearance is necessary to prevent damage to the sides of the adjacent cabinets. A minimum of 24 inches is recommended. The open space under a sink should be made as deep as possible by placing the trap and drains at the back. The undersurface of the sink and the pipes should be insulated to prevent burns. EASE-OF-USE TESTS Accessibility or ease of operation of storage units, special drawers and cupboards, and appliances such as refrigerators, washing machines, and ovens were tested in the following way: As the subject performed the operation her reactions and comments were noted by the observer and the activity was then scored as excellent, good, fair, or impossible. See Appendix C (pages 42 to 47) for scoring sheets. Refrigerators were scored for accessibility of all parts and for ease of removing parts for cleaning. Several refrigerators proved suitable for wheelchair use. The door of the freezer compartment should be hinged on the side (Fig. 15) rather than at the bottom (Fig. 16). There should be good access to all parts of the interior for cleaning. Revolving or sliding removable shelves are excellent. Automatic de- frosting and automatic filling of freezer trays are also good con- venience features in refrigerators. Dishwashers. To test dishwashers, each was opened and a plate placed in the most distant part of the tray. Controls were tried and strainers, if any, were removed and replaced. Front-loading dish- washers proved far more accessible and easy to use than top-loading models (Fig. 17). All subjects were able to open, load, and manage the controls on the two front-loading models that were tested. The two top-loading models were difficult to operate because of their depth and their construction, which prevented a close approach (Fig. 18). Since strainers are often located where they are difficult to reach, a self -cleaning model is preferable. 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 21 The size and design of this refrigerator made it easy to use. The side-opening freezer compart- ment is recom- mended. (Fig. 15) The bottom-hinged door on the freezer compartment made this refrigerator dif- ficult to use. (Fig. 16) 22 BULLETIN No. 661 Front-loading dish- washers were much more satisfactory than top-loading ones. (Fig. 17) Top-loading dishwashers prevented a close approach and required a very long reach. (Fig. 18) This oven is too high for easy removal of food. The drop-down door is a safety hazard. (Fig. 19) Ovens were judged for height and ease of operating doors and shelves (Figs. 19 and 20). Of the two types of ovens tested, range and separate, the separate oven, adjusted to the correct height, was pre- ferred. However, many of the subjects made no objection to the use of the oven in a standard range, provided the shelves pulled out easily and did not allow pans to tip as they were being removed. Many of the subjects were accustomed to range ovens and found them accept- able. The door on the 30-inch wide range was slightly heavy and more difficult to manage than those of the 20- and 24-inch ranges. All subjects felt that a side-hinged door (which was not available at the time of the research) would reduce the danger of burns as well as permit a closer approach. The height of this oven allows easy transfer from oven to counter. A side- hinged door would be preferable. (Fig. 20) The swing-out broiler was easy to use, but a higher level than the one shown is preferable. (Fig. 22) A low broiler with a drop-down door is very dangerous. (Fig. 21) A side-opening door for a broiler was the easiest to use. Such a door is also recommended for ovens. (Fig. 23) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 25 Broilers were tested for height and ease of operation. The com- plete pan was lifted out and replaced. Most of the broilers were too low to open and handle easily. The pull-out type was quite dangerous (Fig. 21). The swing-out type, with the broiler pan attached to the side-hinged door (Fig. 22), was acceptable but needed to be placed at a higher level. Most of the subjects had difficulty removing any but the smallest of the broiler pans. The narrow broiler with a side-hinged door (Fig. 23) was the most satisfactory of the broilers that were tested. A roaster was mounted on a cart and the subject pushed or pulled it to the sink and lifted out each of the pans as if for washing (Fig. 24) . The unit was scored for height, ease of moving, and convenience. Most of the subjects considered the roaster on the cart a very satis- factory piece of equipment. All found the height good; the second shelf of the cart, on which the roaster was mounted, was 20 inches high (the top shelf had been removed). The cart was easy to move from place to place. The small pans were not difficult to handle but the large pan would present a problem if it were lifted when heavily loaded with food. However, since the food could be cooked and served in the small pans, it would not be necessary to remove the large pan except when empty. A hinged top on the roaster is an advantage in that it opens easily and requires no storage space when checking the interior. A roaster placed on the second shelf of a cart was convenient for cooking and cleaning. (Fig. 24) 26 BULLETIN No. 661 A pull-up unit for an electric mixer is easy to operate when good hard- ware is used. (Fig. 25) Mixer units. Two commercial mixer units and one of special design were opened, operated, and closed. One commercial unit was low and mounted on such heavy springs that some of the subjects had difficulty raising it into position for use. The other was operated easily but was too high when in position. The special unit was placed on easy- operating hardware and came up into position at 27 inches, which, because of construction requirements, was 2 inches more than indicated as comfortable by the research (see Table 6). Nevertheless, the 27- inch height was satisfactory for all subjects (Fig. 25). Full-height storage units. To test the ease of using full-height storage units, the subject removed a small object from the back of the shelves and replaced it. Units not exceeding 12 inches in depth pro- vided a range of acceptable storage from the floor to 52 inches in height. The lower shelves should not be placed too close together because of the difficulty of reaching under one shelf into the next. A 6-inch or greater span is suggested between shelves, depending on what is to be stored. Door storage increases the number of accessible articles as well as the usable height, but the swinging door may create some conflict with the chair (see Fig. 9). Base cabinets were tested in the same way as full-height storage units. It was found that cabinets of standard 24-inch depth do not pro- vide acceptable storage unless they are fitted with drawers, bins, or pull-out, revolving, or swing-out shelves to bring the contents within easy reach without too much maneuvering of the chair. Sliding or folding doors cause the least interference with the chair. It is im- Storage cabinets with independently revolving shelves (left) and bin-type storage (right) are particularly good for those with little strength in their arms. (Figs. 26 and 27) portant to use the type of hardware which provides very easy opera- tion of all drawers, shelves, and doors. Special storage units in base cabinets were tested by having the subjects remove a small object from the back of each area and replace it. These special units were designed to bring the contents within easy reach and they proved very satisfactory to all subjects. The revolving-shelf unit (Fig. 26) is simple in construction. Each shelf turns independently, which makes it particularly good for those with little strength in their arms. Bin-type storage takes advantage of gravity and requires little effort to open (Fig. 27). Two bins could be mounted one above the other for functional use of space. Pull-out side panels on easy-operating hardware (left) and door storage on curved shelves (right) make items easily accessible. (Figs. 28 and 29) jrl Drawer storage with slanting partitions (left) make canned goods easy to see and reach. Deep drawers with file dividers (right) prevent stacking of pans. (Figs. 30 and 31) Right and left pull-out panels on either side of a mix counter bring many utensils and supplies within easy reach (Fig. 28). Curved shelves mounted on a door also make items easily acces- sible (Fig. 29). Two shelves were used in the test, but a third shelf could be added. A continuous hinge is recommended to give adequate support. Canned goods are easy to see and to grasp when they are stored in drawers fitted with slanting partitions (Fig. 30). Several drawers could be placed one above the other in a single base unit. Deep drawers fitted with vertical file partitions make shallow uten- sils easy to see, to reach, and to grasp (Fig. 31). Laundry equipment. For the laundry tests, the subject approached the washing machine or dryer with a bedsheet in a cart, trying several approaches. The sheet was placed in the machine, controls tried, and the sheet removed and replaced in the cart. When the washer and dryer were in adjacent positions, the sheet was transferred directly from one machine to the other. Forty-six percent of the subjects were able to reach the bottom of the tub in one model of a top-opening washer, and several of them expressed a preference for this type. The other top-opening model was too high and too deep for easy use, and the controls at the back were difficult to reach (Fig. 32). In general, front-opening washers with the doors hinged at the side are the most satisfactory type (Fig. 33). A right-hinged washer and a left-hinged dryer placed side by side make it easy to transfer articles from one machine to the other. The only combination washer-dryer available for testing had a bottom- hinged door which kept the subject so far away from the drum that it was impossible to use (Fig. 34). Easy accessibility of controls on all appliances is important. This top-loading washing machine was too high and too deep for many of the subjects. (Fig. 32) A front-loading washing machine with a side-hinged door is recommended. (Fig. 33) The bottom-hinged door of this washer made the tub inac- cessible from any approach. (Fig. 34) 30 BULLETIN No. 661 (JUNE, KITCHEN-LAYOUT TESTS Procedures. Data from the above measurement and ease-of-use tests were averaged and analyzed to determine adequate dimensions for kitchen areas. Based on these dimensions, three experimental kitchen arrangements were set up an L-shaped, a U-shaped, and a corridor-shaped kitchen. The three arrangements were planned ac- cording to good kitchen planning principles (4). In applying the results of the previous tests to actual kitchen layouts, certain adjust- ELEVATION REFRIGERATOR BLIND CORNER REFRIGERATOR 75" T SPACE BELOW RANGE STORAGE TABLE SERVE CENTER SCALE >/4 inch a ] loot Floor plan and elevation of the L-shaped kitchen. This plan and the oth' two layouts (Figs. 37 and 40) were used for testing purposes only am 1 mensions are not necessarily recommended. For example, the ranp provided more knee space than was necessary (24 inches in he ; width is the recommended minimum). 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 31 ments were made to keep heights and widths uniform, since it would be impractical from a construction standpoint to have several varia- tions in adjacent counter heights within one kitchen plan. A sink cabinet and two mix-center units were built as described in Appendix A (page 40). The remaining equipment used in the kitchen- layout tests was selected from the items used in the measurement and ease-of-use tests. The units used were for testing purposes only and are not necessarily recommended for actual kitchens. Each of four subjects prepared a complete meal for four people, served, ate, and cleared up afterwards in each of the arrangements. The meal was considered a typical family dinner and required the use of every part of the kitchen during each test period. A process chart was followed to standardize procedures and reduce time and unneces- sary trips (see Appendix B, page 41). Dishes were washed by hand in the first arrangement to check the adequacy of the sink area. A dish- washer was used for the other two arrangements to test its con- venience and to save time and energy. An observer watched each subject as she worked, keeping notes on the work process and body and chair positions, and recording any pertinent comments or opinions. Results. Two of the subjects had had a great deal of cooking ex- perience, one had some, and the other had very little, but the results and opinions on the ease of working in each of the kitchens were very similar. A revealing comment from the subjects concerned how easy it was to work in these layouts and how much less tired they were than they would have been had they prepared the same meal in their own One advantage of the L-shaped kitchen was that it was easy to manipulate the chair in it; on the other hand, the subjects felt that it was so spread out that it required a good deal of moving about. (Fig. 36) 32 BULLETIN No. 661 kitchens even though they thought they managed well with their facilities at home. Each of the arrangements had certain advantages and disadvan- tages. In the L layout (Figs. 35 and 36) the subjects liked the long continuous counter between refrigerator and sink because they could slide objects with one hand while operating the chair with the other. However, this mix counter (see Fig. 28) was too high (31 inches) for certain hand operations and the subjects either moved to the sink or transferred the activity to their laps for a lower surface. All the subjects liked the openness of the L plan but felt that it was so spread ELEVATION OVEN (BOTTOM RACK! 52" 27" I J, 1 DISHWASHER SCALE '/i inch 1 foot HINGED COUNTER 1C ART BELOW) SERVE CENTER OVEN DISHWASHER BLIND CORNER 31" HIGH MIX CENTER \ ' / ^ 1^- OPEN -^ SPACE BELOW OPEN SPACE BELOW SINK OPEN 1^1 SPACE BELOW-^[ REFRIGERATOR RANGE STORAGE RANGE BLIND CORNER V .?!" Hir;H j Floor plan and elevation of the U-shaped kitchen used for testing. Note that the bottom rack of the oven was placed at a height of 27 inches so that the subjects could slide pans from it directly to the counter. (Fig. 37) The compactness of the U-shaped kitchen was an advantage in that it re- quired a minimum of moving about. (Fig. 38) This 27-inch-high mix center was used in both the U and corridor arrange- ments. Vertical stor- age on the upper shelves makes all items easily acces- sible. (Fig. 39) 34 BULLETIN No. 661 (JUNE, out that it required a good deal of moving about. The corner counter was difficult to reach for cleaning. The U-shaped arrangement (Figs. 37 and 38) was compact and required a minimum of moving, but the corners were a problem inso- far as cleaning and storing were concerned. The 27-inch-high mix counter (Fig. 39) used in both the U and corridor arrangements was preferred by all the subjects, the only objection being that it was not quite large enough. For this reason a mix counter 4 feet wide is recommended. The corridor arrangement (Figs. 40-42) was satisfactory and had the added advantage of eliminating corners. The pass-through counter used in the corridor layout made the use of a cart less essential than with the other two plans, but a standard kitchen cart was a great help with the serving and clearing-up process in each of the arrangements. SCALE '/< inch 1 fool & 31" HIGH t EFRIGERATOR 1 DISHWASHER MIX CENTER (Same as (/kitchen) "1 OPEN SPACE BELOW A SINK / 5' ^t OPENS BOTH SIDES RANGE ' STORAGE WALL OPEN ^ SPACE BELOW 1 PASS- THROUGI- COUNTER RANGE STORAGE OVEN Floor plan of the corridor kitchen used for testing. A minimum of 5 feet oi free space between cabinets and appliances that are opposite each other is essential. (Fig. 40) 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 35 Details of mix- serve centers in corridor kitchen. (Fig. 41) A row of surface burners 31 inches high on a table made it easy to see into the pans while food was cooking and reduced the danger of burns (Fig. 42). This test unit, however, was more space-consuming than a range unit would need to be. Dishwashing was easy with either the hand or the mechanical method. The specially designed sink unit was very convenient and the position of the trap and drains at the back of the bowls gave excellent clearance for the knees (Fig. 43). The test layouts all provided adequate facilities and equipment for the research but did not have as much storage or as continuous counter space as should be present in a home kitchen. The next step in this research will be the construction of complete kitchens for further testing and as a permanent exhibit of good kitchen design for the wheelchair homemaker. Details of sink- range centers in corridor kitchen. (Fig. 42) 36 BULLETIN No. 661 (JUNE, An easy-to-use sink center with a counter 31 inches high, shallow bowls to prevent knee interference, and 24-inch-wide knee space. See Fig. 2 for a view of this sink in operation and compare it with Fig. 1, which shows a standard sink cabinet. (Fig. 43) SUMMARY AND CONCLUSIONS In order to determine recommended dimensions for kitchen units and arrangements adapted to wheelchair use, a series of tests was conducted at the housing research laboratory of the University of Illi- nois, using 26 women volunteers, all of them confined to wheelchairs. Measurements were made of the following: (1) the subjects in their chairs; (2) space requirements for maneuvering the chair; (3) vertical and horizontal reaches; (4) comfortable working heights; and (5) necessary clearances of work areas. Kitchen and laundry appliances and cabinets of various designs were then tested for acces- sibility and ease of operation. The last part of the research involved the testing of three kitchen arrangements, which were set up according to the dimensions obtained in the previous tests. Despite the wide range of individual measurements of the subjects, the research shows that there are certain general dimensions and planning guides which can provide comfortable, safe work areas for many wheelchair homemakers. Many of the units designed in this study for wheelchair use, partic- ularly the wide variety of cabinets designed to make storage easily accessible, are equally suitable for standard kitchens. The chief varia- tions from standard kitchen equipment apply to the heights of sinks, 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 37 surface cooking units, and work counters, and to the need for knee space at least 24 inches wide under these units. In determining the overall height of any unit, construction require- ments as well as minimum space requirements for comfortable use must be taken into consideration. A good height for sink and surface cooking units is 30 to 31 inches. Sink drains should be placed at the back of the bowl instead of at the center to provide maximum clearance for the knees. The underside of the bowl and the pipes should be insulated to eliminate danger of burns. Surface cooking units should be placed at the front of the counter; controls must be easily accessible, preferably in the front panel. A counter 4 feet wide and 2 feet deep is recommended for a mix center. For hand-beating and rolling operations a height of approxi- mately 27 inches is desirable. A pull-out board or table at the correct height could serve this purpose. Shallow cupboards with adjustable shelves not exceeding 12 inches in depth and 72 inches in overall height are excellent. Midway storage units between base and wall cabinets also are good. Many wheelchair subjects can use the bottom shelf of wall cabinets if the cabinets are correctly placed, especially if vertical-file storage is provided. Many types of commercial appliances can be used by wheelchair homemakers, but careful selection is necessary. Front-opening equip- ment is usually better than top-opening. In general, doors on appliances should be hinged on the side. Controls must be easy to reach. Several small electrical cooking appliances may be a satisfactory substitute for a standard range, and a utility cart helps make them even more convenient. The results of the kitchen-design tests show that the L-shaped kitchen is excellent from the standpoint of ease of manipulating the chair, but the travel distances are greater than with the other arrange- ments. The compactness of the U-shaped kitchen is an asset, but the corners may present a cleaning and storing problem. The corridor- shaped kitchen, with a 5-foot passage through the center, is excellent. In any kitchen planned for wheelchair use it is important to have a minimum of 5 feet of free space between cabinets and appliances that are opposite each other. Corner cabinets should be avoided when possible, but if they are used, they should have revolving shelves. Heights should be adjusted to the reaches of the person using the kitchen when it is possible to adapt designs to meet individual requirements. 38 BULLETIN No. 661 (JUNE, Complete kitchens based on the results of this research are needed to provide examples of good kitchen design for wheelchair home- makers. Work is now in progress on providing a variety of kitchen designs and working drawings of the special storage units used in this study for anyone interested in housing for the handicapped. LITERATURE CITED 1. MAY, E. E., WAGGONER, NEVA, and JUDSON, J. S. A selected bibliography on rehabilitation of handicapped homemakers. Univ. Conn. School of Home Econ. 1959. 2. McCuLLOUGH, H. E. Space requirements for household activities. Library Phot. Reproduction. 111. Agr. Exp. Sta. and Depts. of Home Econ. and Agr. Eng. Project 707. 1955. 3. O'BRIEN, RUTH, and SHELTON, WILLIAM C. Women's measurements for gar- ment and pattern construction. U. S. Dept. Agr. Misc. Pub. 454. 1941. 4. RANNEY, E. M. Kitchen planning standards. Univ. 111. Small Homes Council Cir. C5.32. 1949. 5. RUSK, H. A., KRISTELLER, E. L., JUDSON, J. S., HUNT, G. M., and ZIMMERMAN, M. E. A manual for training the disabled homemaker. N. Y. Univ.- Bellevue Med. Center, Inst. Phys. Med. and Rehabil., Rehabil. Alonograph VIII. 1955. APPENDIX A EQUIPMENT USED IN THE RESEARCH For Determining Dimensions Measuring devices Anthropometer and caliper, provided by U. S. Department of Agriculture. Hens caliper. Steel tape. Six plywood panels on casters. One, 24 inches wide, 54 inches high. Two, 36 inches wide, 36 inches high. Three, 48 inches wide, 66 inches high. Shelf units Three, each fitted with metal stripping for adjusting shelves at i/^-inch intervals. One full height, 24 inches wide, 12 inches deep, 84 inches high. One over counter, 24 inches wide, 12 inches deep, 36 inches high. One over base cabinets, 18 inches wide, 12 inches deep, 24 inches high. Adjustable sink unit One deep, right-hand bowl and one shallow bow'l. Frame, 48 inches wide, 24 inches deep, 26 inches high. Block-and-dowel feet to adjust height at 1- inch intervals. 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 39 Adjustable table unit Ironing board, adjustable at 14-inch intervals, fitted with a top 24 inches wide and 48 inches long. For Determining Ease of Use Carts One metal, with removable top shelf, 27 inches long, 16 inches wide, 32 inches high. One folding metal laundry cart with canvas bag. Appliances Refrigerators Three, each right-hinged, with self-contained freezer compartment. One with a right-hinged freezer door, standard shelves. One with a bottom-hinged freezer door, standard shelves. One with a right-hinged freezer door, revolving shelves. Dishwashers Two top-loading. Two front-loading. Ovens One separate, adjustable in height. Three range ovens, 20 inches, 24 inches, and 30 inches wide. Broilers One bottom-hinged. Two side-hinged. One high pull-out. One low pull-out. Small electrical appliances Large roaster with hinged top, large and small insert pans, mounted on kitchen cart with top shelf removed (cart with top shelf removed, 20 inches high). Percolator, 9-cup size. Mixer with two glass bowls, rubber feet replaced by ball-bearing rollers. Iron, 3i/2 pounds. Conventional storage units Base cabinets Revolving corner unit. Lift-up mixer units, two types. Drawers in standard cabinets, wood and steel. Drawers behind sliding doors, wood. Dining room, buffet-type storage Two units, each 17 inches deep. One with sliding doors. One with hinged doors. Continuous cupboard with door storage Upper section: interior, 9 inches deep; door storage, 2i/2 inches deep. Lower section: interior, 81/2 inches deep; door storage, 3 inches deep. 40 BULLETIN No. 661 GUNE, Specially designed storage units (base cabinets) Bin. Canned-good storage in drawer. Curved shelves mounted on door. File drawer, high. File drawer, low. Mixer unit. Pull-out panel. Revolving-shelf unit. For Kitchen -Layout Tests Sink cabinet Double-bowl sink, 5 inches deep, drains punched at the back of each bowl, fitted with a one-hand mixer faucet, and set in a cabinet 5 feet wide, 25 inches deep, and 31 inches high. Center knee space 24 inches wide, 26 inches high to sink bottom, and 13 inches deep to trap. Drawers in right cabinet mounted on easy-action nylon rollers in metal tracks. Left cabinet fitted with adjustable sliding shelves for pan storage. Door in left cabinet fitted with a rack for detergents and a moisture-proof bag for garbage. Sliding towel rack mounted on left side of open knee space. Mix center No. 1 Two pull-out panels, operating on heavy-duty nylon rollers in metal tracks, fitted under a counter 31 inches high. Right panel fitted with pegboard for hanging utensils. Left panel fitted with adjustable shelves for storing mix-center food supplies. Knee space 24 inches wide. Separate upper cabinet, 12 inches deep, with adjustable shelves, placed on counter; used for storing additional mix-center supplies and for vertical pan storage. Mix center No. 2 Counter, 27 inches high, 36 inches wide, with open space, 36 inches wide, below. Storage for food supplies and utensils provided in cabinet with adjustable shelves, 12 inches deep, above counter. Range center Four electric surface units placed in a row on a table. Cooking surface 31 inches high. Adjacent counter and drawer unit for storage, 31 inches high. Oven Separate oven placed on adjustable base to bring bottom shelf to same height as adjacent counter, 31 inches high in two layouts, 27 inches high in one layout. Serve unit No. 1 Base unit, 36 inches high, topped with small shelves to simulate a midway unit. Storage for tableware. Serve unit No. 2 Full-height storage unit with access from both sides in one section and a pass-through counter in center section. I960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 41 APPENDIX B MENU AND PROCEDURES FOR TESTING KITCHEN LAYOUTS Menu Individual Meat Loaves with Sauce Mashed Potatoes Buttered Green Vegetable Brown and Serve Rolls Tossed Salad Fruit Upside-down Cake Coffee Recipes were provided for the meat loaves and the cake. The menu re- quired the use of all parts of the kitchen. Procedures The following condensed process chart was used to standardize procedures for meal preparation by the four subjects who tested the three kitchen arrange- ments: Turn on oven. Wash hands. Collect meat loaf ingredients. Mix meat loaves and sauce. Place meat loaves in pan and set aside. Open fruit and mix topping for dessert. Mix cake and finish dessert. Place meat and cake in oven. Set timer. Wash cooking utensils and replace. Peel potatoes and set aside in cold water. Arrange salad in bowl and place in refrigerator. Set table using cart to transport tableware. Place serving dishes on cart. Prepare butter and cream and place in refrigerator. Remove coffee, frozen vegetable, rolls, and milk for potatoes from refrigerator. Prepare coffee. Heat water for vegetables. Start potatoes. Plug in coffee. Start vegetable. Butter tops of rolls and put in oven to brown. Take cold food to table. Mash potatoes. Drain and season vegetable. Serve food and eat lunch. Remove services to cart and take to sink. Serve dessert and replenish coffee and water. Clear table. Wash dishes and utensils and replace. 42 BULLETIN No. 661 OUNE, APPENDIX C MEASUREMENT AND PREFERENCE DATA FORMS Personal Data Name Name, observer Address Date Telephone Birth date Age Length of disability Handedness: Left Right Ambidextrous. Diagnosis Particular problems Basic Measurements of Subject Weight Height, if standing Heights, seated in chair: Above floor Above seat. Eye level Thigh Elbow: Left Right Shoulder: Left Right- Lengths: Seated, back of chair to farthest knee projection Arms: Left Right Total span. Wheelchair Data Brand Model No. Arms! Typp Rpmnvahlp! VPS No Seat cushion! VPS No Thickness Heights! Ovprall .Spat Arms Fnntrpst Widths: Overall .Seat Arms Depths: Overall .Spat Arms Comments Space Needs for Manipulating Chair Stationary, arms positioned for movement Movement in straight line . Complete turn inches X inches Comments 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS Reaches Left hand Right hand 43 Vertical (inches) Straight approach . Left approach Right approach . . . Comments Up Down Up Down Horizontal Sink_ Comfortable Working Heights (inches) Mix counter Ironing board Mixer_ Use of Storage Units Reach into continuous open shelves (inches) Left hand Right hand Both hands Up Down Up Down Up Down Straight approach . . . Left approach Right approach Reach into continuous shelves with doors (inches) Interior _ Door Reach into upper storage over open counter (inches) Left hand Right hand Both hands__ 44 BULLETIN No. 661 (JUNE, Reach into upper storage over base cabinets of two heights (inches) Left hand Right hand Both hands 30" base 36" base 30" base 36" base Straight approach . . . . Right approach , Reach into four-drawer base unit Ease of removing object from back of each drawer Straight approach Left approach Top drawer 1234 1234 2nd drawer 1234 1234 3rd drawer 1234 1234 4th drawer.. 1234 1234 Hinged-door cabinets Ease of opening 30" base 36" base Right approach 1234 1234 1234 1234 Straight approach Left approach Right approach 1234 1234 1234 Range of use of shelves Straight approach Left approach Right approach 1234 1234 1234 Sliding-door cabinets Ease of opening Straight approach Left approach Right approach 1234 1234 1234 Range of use, shelves Straight approach Left approach Right approach High 1 2 3 4 1234 1234 Low 1 2 3 4 1234 1234 Range of use, drawers Straight approach Left approach Right approach High 1 2 3 4 1234 1234 Low 1 2 3 4 1234 1234 Scoring: 1 = excellent, 2 = good, 3 = fair, 4 = impossible. 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS 45 Ease of Use of Appliances Refrigerators Right-hinged door Accessibility (check for ease of access yes or no) Top 2nd 3rd Door shelves .... Interior shelves. . Ease of use Hydrator Chiller Freezer . . 4th Revolving shelves, right-hinged door Accessibility (check for ease of access yes or no) Top 2nd 3rd 4th Door shelves .... Interior shelves. . . Ease of use Hydrator 1 2 3 4 Chiller 1234 Freezer 1 2 3 4 Dishwashers Front-loading Ease of loading Left approach Right approach Top rack 1234 1234 Bottom rack 1 2 3 4 1 2 3 4 Ease of cleaning 1 2 3 4 1 2 3 4 Front-loading Ease of loading Left approach Right approach Top rack 1234 1234 Bottom rack 1234 1234 Ease of cleaning 1 2 3 4 1 2 3 4 Top-loading Ease of loading Left approach Right approach Top rack 1234 1234 Bottom rack 1234 1234 Ease of cleaning 1 2 3 4 1 2 3 4 Scoring: 1 = excellent, 2 = good, 3 = fair, 4 = impossible. 46 BULLETIN No. 661 (JUNE, Top-loading Ease of loading Top rack Left approach 1 2 3 4 Right approach 1234 Bottom rack 1 2 3 4 1234 Ease of cleaning 1 2 3 4 1234 Ovens Separate Ease of operation 1 2 3 4 Satisfactory height VPS Nn Range. . 1 2 3 4 VPS No 20 inches wide . 1234 VPS Nn 24 inches wide . . 1 2 3 4 VPS Nn 30 inches wide , 1 2 3 4 VPS Nn Broilers Side-hinged Model A Ease of operation 1 2 3 4 Satisfactory height VPS Nn Model B 1 2 3 4 VPS Nn Bottom-hinged . . 1 2 3 4 VPS Nn Swing-out 1234 VPS Nn Pull-out. . 1234 VPS Nn Electric roaster on cart Ease of operation Ease of removing large pan .... 1 2 3 4 Ease of moving from place to place. Comments Mixer units Commercial Model A Model B Special design Revolving-shelf base cabinet 1234 Ease of operation .1234 1234 Satisfactory height Yes No Satisfactory height Yes No Commercial . . . Special design. Ease of operation .1234 1234 Access to shelves Top 2nd 3rd 1234 1234 1234 1234 1234 1234 Scoring: 1 = excellent, 2 = good, 3 = fair, 4 = impossible. 1960) SPACE AND DESIGN REQUIREMENTS FOR WHEELCHAIR KITCHENS Special storage units (comments on ease of use and convenience) Canned-goods storage in drawer 47 Curved shelves mounted on door Pull-out panel. Bin High file drawer. Low file drawer. Laundry Equipment Combination washer-dryer, drop-down door ^ Access to controls 1 2 3 4 Ease of use 1 2 3 4 Best method of approach Automatic washers, top-opening Model A Access to controls 1 2 3 4 Ease of use 1 2 3 4 Best method of approach Automatic washer, front- opening, right-hinged Access to controls 1 2 3 4 Ease of use 1 2 3 4 Best method of approach Automatic dryer, front-opening, left-hinged Access to controls 1 2 3 4 Ease of use 1 2 3 4 Best method of approach Model B 1234 1234 Scoring: 1 = excellent, 2 = good, 3 = fair, 4 = impossible. 5M 6-60 71066 UNIVERSITY OF ILLINOIS-URBANA